Name of Work:- Providing and fixing partition cabin in new office shed at APL office
Sr. No
S.CODE NO
Description of Work
Unit
Qty
sqm
120
sqm
20
sqm
350
sqm
300
Providing and fixing of anodized aluminium(Al) partitions of standard anodized Al sections of approved quality and make with 12mm thick pre-laminated 3-layer medium density ,particle board I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic 1
resin of approved brand and manufacture in paneling fixid in Al sections at top and bottom panel including all anodized Al fixtures,fastenings etc including making recesses in Brick/Concrete surfaces and manufacturers specifications etc completed as per specifications and directions. Fixing anodized extruded Al doors (single or double shutter) conforming to IS:1948,IS:1949,fabricated fromextruded sections of Jindal or equivalent make having minimum 3mm wall thickness as per IS:1285,IS:733 and electro color coating of minimum 15 microns
2
thickness.Glazing shall be clear float glass of 5.5mm thickness, including snap fit type,besding concealed screws,fixtures with handles as both sides fasteners,locking arrangements and board closures etc as directed by EIC Providing and laying 40mm thick IPS Floofing with cement concrete
3
320003251
1:2:4(1cement:2 sand:4coarse aggregates) and top finished with neat cement finish
4
320006049
Providing and laying 2mm thick PVC Flooring(flexible) as per IS:5318.The work shall include underlaying of screed topping,application of Rubber-based adhesive using notched trowel,preparation of sub floors,protective edgingall completes as per the specifications and instructions of engineer ih charge.The PVC flooring sheet shall confirm to IS:3468
5
320000750
Fixing vitrified ceramic tiles(8mm thick) of approved size and manufacture for flooring laid on 12mm thick CM 1:3(1Cement:3Sand) and joining with cement slurry etc.(Approved makes: Gran Marbo,Marbito or equivalent Ivory Shade)
sqm
15
xing partition cabin in new office shed at APL office
Rate
Total
Remarks/W.O Referance
2000
2,40,000
Ref:-APL/4X330/WO-23/07/08 Dt. 04/03/08(Reaped Order)
2000
40,000
Ref:-APL/4X330/WO-23/07/08 Dt. 04/03/08(Reaped Order)
75
26,250
S.O.No-5700002444
1562.4
4,68,720
S.O.No-5700003285
635
9,525
S.O.No-5700002127
Name of Work:- Providing and fixing partition cabin in new office shed at APL office Sr. No S.CODE NO
1
2
3
4
5
Description of Work Providing and fixing of anodized aluminium(Al) partitions of standard anodized Al sections of approved quality and make with 12mm thick pre-laminated 3-layer medium density ,particle board I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in paneling fixid in Al sections at top and bottom panel including all anodized Al fixtures,fastenings etc including making recesses in Brick/Concrete surfaces and manufacturers specifications etc completed as per specifications and directions. Fixing anodized extruded Al doors (single or double shutter) conforming to IS:1948,IS:1949,fabricated fromextruded sections of Jindal or equivalent make having minimum 3mm wall thickness as per IS:1285,IS:733 and electro color coating of minimum 15 microns thickness.Glazing shall be clear float glass of 5 mm thickness, including snap fit type,besding concealed screws,fixtures with handles as both sides fasteners,locking arrangements and door closures etc as directed by EIC Providing and laying 40mm thick IPS Floofing with cement concrete 320003251 1:2:4(1cement:2 sand:4coarse aggregates) and top finished with neat cement finish Providing and laying 1.5 mm thick PVC Flooring (flexible) as per IS:5318.The work shall include underlaying of screed topping,application of Rubber-based adhesive using notched 320002238 trowel,preparation of sub floors,protective edgingall completes as per the specifications and instructions of engineer ih charge.The PVC flooring sheet shall confirm to IS:3468 Providing & Fixing vitrified ceramic tiles(8mm thick) of approved size and manufacture for flooring laid on 12mm thick CM 320000750 1:3(1Cement:3Sand) and joining with cement slurry etc.(Approved makes: Gran Marbo,Marbito or equivalent Ivory Shade)
Unit
Qty
Rate
Total
sqm
120
2000
240,000
Ref:-APL/4X330/WO-23/07/08 Dt. 04/03/08(Reaped Order)
sqm
20
2000
40,000
Ref:-APL/4X330/WO-23/07/08 Dt. 04/03/08(Reaped Order)
sqm
350
75
26,250
S.O.No-5700002444
SFT
3000
34
102000
S.O.No-5700001918
sqm
15
635
9,525
S.O.No-5700002127
Total Rs
417,775
Remarks/W.O Referance
Providing and fixing of anodized aluminium(Al) partitions of standard anodized Al sections of approved quality and make with 12mm thick pre-laminated 3-layer medium density ,particle board I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in paneling fixid in Al sections at top and bottom panel including all anodized Al fixtures,fastenings etc including making recesses in Brick/Concrete surfaces and manufacturers specifications etc completed as per specifications and directions.