O And M Office Boq

  • Uploaded by: Kuldeep Chakerwarti
  • 0
  • 0
  • December 2019
  • PDF

This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA


Overview

Download & View O And M Office Boq as PDF for free.

More details

  • Words: 782
  • Pages: 7
Name of Work:- Providing and fixing partition cabin in new office shed at APL office

Sr. No

S.CODE NO

Description of Work

Unit

Qty

sqm

120

sqm

20

sqm

350

sqm

300

Providing and fixing of anodized aluminium(Al) partitions of standard anodized Al sections of approved quality and make with 12mm thick pre-laminated 3-layer medium density ,particle board I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic 1

resin of approved brand and manufacture in paneling fixid in Al sections at top and bottom panel including all anodized Al fixtures,fastenings etc including making recesses in Brick/Concrete surfaces and manufacturers specifications etc completed as per specifications and directions. Fixing anodized extruded Al doors (single or double shutter) conforming to IS:1948,IS:1949,fabricated fromextruded sections of Jindal or equivalent make having minimum 3mm wall thickness as per IS:1285,IS:733 and electro color coating of minimum 15 microns

2

thickness.Glazing shall be clear float glass of 5.5mm thickness, including snap fit type,besding concealed screws,fixtures with handles as both sides fasteners,locking arrangements and board closures etc as directed by EIC Providing and laying 40mm thick IPS Floofing with cement concrete

3

320003251

1:2:4(1cement:2 sand:4coarse aggregates) and top finished with neat cement finish

4

320006049

Providing and laying 2mm thick PVC Flooring(flexible) as per IS:5318.The work shall include underlaying of screed topping,application of Rubber-based adhesive using notched trowel,preparation of sub floors,protective edgingall completes as per the specifications and instructions of engineer ih charge.The PVC flooring sheet shall confirm to IS:3468

5

320000750

Fixing vitrified ceramic tiles(8mm thick) of approved size and manufacture for flooring laid on 12mm thick CM 1:3(1Cement:3Sand) and joining with cement slurry etc.(Approved makes: Gran Marbo,Marbito or equivalent Ivory Shade)

sqm

15

xing partition cabin in new office shed at APL office

Rate

Total

Remarks/W.O Referance

2000

2,40,000

Ref:-APL/4X330/WO-23/07/08 Dt. 04/03/08(Reaped Order)

2000

40,000

Ref:-APL/4X330/WO-23/07/08 Dt. 04/03/08(Reaped Order)

75

26,250

S.O.No-5700002444

1562.4

4,68,720

S.O.No-5700003285

635

9,525

S.O.No-5700002127

Name of Work:- Providing and laying floor finish and fixing partitions in office shed of O and M at APL ,TPP Mundra

Sr. No

Description of Work

Unit

Qty

1

Providing and Fixing in position glazed anodised aluminum partitions of standard anodised aluminum sections of approved quality and make, with 6mm glass and 12mm thick prelaminated three layer medium density particle board grade I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium sections at top and bottom panel including all anodised aluminum fixtures, fastenings etc. including making recesses in brick/concrete surfaces and making good the same after fixing partitions, all as per manufacturer's specifications etc.complete as per specifications, drawings and directed by Engineer -In- Charge.The doors shall be provided at the directed locations.The rate towards the preparation of openings for doors is included in the quoted rate and no extra shall be payable.

sqm

120

2000.00 240000.00

2

Providing and Fixing anodized extruded Alluminium doors (single / double/ sliding shutters ) conforming to IS:1948,IS:1949,fabricated from extruded sections of Jindal or equivalent make having minimum 3mm wall thickness as per IS:1285,IS:733 and electro color coating of minimum 15 microns thickness. Glazing shall be clear float glass of 5 mm thickness,including snap fit type,besding concealed screws,fixtures with handles as both sides fasteners,locking arrangements and door closures etc as directed by EIC. The rate includes preparation of sliding arrangement and other relevent fixtures required to complete the job.

sqm

20

2000.00

40000.00

sqm

408

75.00

30600.00

SFT

3500

34.00

119000.00

sqm

20

635.00

12700.00

3

4

5

Providing and laying 40mm thick IPS Flooring with cement concrete 1:2:4 and top finished with neat cement finish.OP Cement shall be issued free of cost at TPP Mundra stores. Providing and laying 1.5 mm thick PVC Flooring (flexible) as per IS:5318.The work shall include underlaying of screed topping,application of Rubber-based adhesive using notched trowel,preparation of sub floors,protective edgingall completes as per the specifications and instructions of engineer ih charge.The PVC flooring sheet shall confirm to IS:3468 Providing & Fixing vitrified ceramic tiles(8mm thick) of approved size and manufacture for flooring laid on 12mm thick CM 1:3(1Cement:3Sand) and joining with cement slurry etc.(Approved makes: Gran Marbo,Marbito or equivalent Ivory Shade) OP Cement for CM shall be given free of cost at TPP Mundra stores.

Rate

Total

Total Rs

442300.00

Providing and fixing of anodized aluminium(Al) partitions of standard anodized Al sections of approved quality and make with 12mm thick pre-laminated 3-layer medium density ,particle board I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in paneling fixid in Al sections at top and bottom panel including all anodized Al fixtures,fastenings etc including making recesses in Brick/Concrete surfaces and manufacturers specifications etc completed as per specifications and directions.

Related Documents

O And M Office Boq
December 2019 16
Office Boq 2.xlsx
December 2019 17
Boq
October 2019 33
Boq
May 2020 18

More Documents from "Kuldeep Chakerwarti"