Request For Codification Of Services For O And M Office

Service Master Codification Request (This request should be sent through HOD by e-mail) [Strike out or write NA whichever is not applicable] Initiated by: Phone No:

Mr.K.P.Chakerwarti 9426600495

Sr. No.

PLANT

1

5501, 5502, 5503 and 5504

2

5501, 5502, 5503 and 5504

Business / Dept. *

Work order/Service Master Number

O and M

New item code, Already executed the similar work at TPP Mundra vide SO No.APL/4 x 330 / WO 23 / 07 / 08 / Dated 04-03-08 [Repeat Order]

O and M

New item code, Already executed the similar work at TPP Mundra vide SO No.APL/4 x 330 / WO 23 / 07 / 08 / Dated 04-03-08 [Repeat Order]

Items marked HOD: Phone No

QUANTITY

65

17

*

are mandatory; Items marked $ are mandatory for Proprietary Items

Mr.D.P.Joshi

PRICE Per Unit

2000

2000

UOM *

Item Description * (Restricted to 40 characters)

M2

Providing and fixing partly glazed and partly panneled Anodized Alluminium Section partitions 6 mm glass and 12mm partcle board grade I Type II conforming to IS 12823 including doors as per dirctions at site including all anodized alluminium fixtures .

M2

Providing and Fixing anodized extruded Alluminium doors (single / double/ sliding shutters ) conforming to IS:1948,IS:1949, Glazing shall be clear float glass of 5 mm thickness.The rate includes preparation of sliding arrangement and other relevent fixtures required to complete the job.

Plant : Requisioner:

Long Description

5503

K.P.Chakerwarti Which Purpose Use

Providing and Fixing in position glazed anodised aluminum partitions of standard anodised aluminum sections of approved quality and make, with 6mm glass and 12mm thick prelaminated three layer medium density particle board grade I,type II conforming to IS:12823 bonded with phenol formaldehyde synthetic resin, of approved brand and manufacture in panelling fixed in aluminium sections at top and Preparation of O and bottom panel including all anodised aluminum fixtures, fastenings etc. including M Office complex at making recesses in brick/concrete surfaces and making good the same after fixing TPP Mundra partitions, all as per manufacturer's specifications etc.complete as per specifications, drawings and directed by Engineer -In- Charge.The doors shall be provided at the directed locations.The rate towards the preparation of openings for doors is included in the quoted rate and no extra shall be payable. Construction power shall be given free of cost at one point only Providing and Fixing anodized extruded Alluminium doors (single / double/ sliding shutters ) conforming to IS:1948,IS:1949,fabricated from extruded sections of Jindal or equivalent make having minimum 3mm wall thickness as per IS:1285,IS:733 and electro color coating of minimum 15 microns Preparation of O and thickness. Glazing shall be clear float glass of 5 mm thickness,including M Office complex at TPP Mundra snap fit type,besding concealed screws,fixtures with handles as both sides fasteners,locking arrangements and door closures etc as directed by EIC. The rate includes preparation of sliding arrangement and other relevent fixtures required to complete the job.

Purchasing Group :

C02