Nu Horizons Electronics Portal Europe - November 2009

Featured Products Gennum’s 3G-SDI Solutions

Gennum’s award winning portfolio of professional and broadcast solutions includes Equalizers, Reclockers, Cable Drivers, Serializers/ Deserializers, Timing and Clock Cleaners, Video Optical modules and PCI Express solutions.

In This Issue: Audio/Video Gennum

Development Tools Xilinx

Controllers Linear Technology

Datacom Micrel

Power & Battery Management Exar

UK Edition November 2009

Audio / Visual

Gennum’s 3G-SDI Solutions The most comprehensive, end-to-end portfolio of broadcast video solutions with a commitment towards unmatched performance and signal integrity. ENABLING THE NEXT GENERATION OF BROADCAST VIDEO EQUIPMENT Gennum’s award winning portfolio of professional and broadcast solutions includes Equalizers, Reclockers, Cable Drivers, Serializers/Deserializers, Timing and Clock Cleaners, Video Optical modules and PCI Express solutions.

WHAT IS DRIVING THE 3G-SDI ADOPTION  Improved jitter attenuation and improved jitter margins mean that there is more tolerance for cascaded SDI signals.  Longer cable distances using coaxial cables means less need to install fiber optics to go the longer distances.  Better performance even at lower data rates, 3G can deliver longer cable lengths and reduced bit error rates.  Improved system reliability with 3G covering both SD/HD data rates then there is a far simplified plant design with less mix of components.

2

For more information, including pricing, availability, datasheets and samples (if available), please visit http://uk.nuhorizons.com/FeaturedProducts

           

SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M compliant Supports date rates from 143Mbps to 2.97Gbps and DVB-ASI at 270Mbps Manual bypass for low data rates with slow rise/fall times 50 ohm differential outputs support DC coupling to 3.3V and 2.5V CML logic DC coupling to 2.5V on GS2984 only 0 to 6dB gain boost pin on GS2984 only Single 3.3V supply Temperature range -40 to +85 deg.C Both in 16 pin QFN package (4x4mm) GS2984 power consumption is typically 195mW GS2964 power consumption is typically 215mW GS2984 typical equalized length of Belden 1694A cable:



3G-SDI Equalizer Benefits       

Industry’s lowest output jitter adaptive cable equalizer and all guaranteed over production testing Extended temperature range of -40 to +85 deg.C Lowest power consumption at SD/HD/3G data rates Longest cable reach at 3G data rates of 140m @ 0.3UI max output jitter 0-6dB gain boost pin is unique to the GS2984 and helps to compensate for 6dB flat attenuation DC coupling to Gennum 3.3V cable drivers & reclockers or to industry standard 3.3V & 2.5V CML logic Drop in replacements for the current GS2974A, GS2974B and GS1574A derivatives

 140m at 3G data rates with 0.3UI max output jitter  200m at HD data rates with 0.3UI max output jitter  400m at SD data rates

 GS2964 typical equalized length of Belden 1694A cable:

 100m at 3G data rates with 0.35UI max output jitter  130m at HD data rates with 0.25UI max output jitter  170m at SD data rates

P ow er (DC-DC Converters)

3G-SDI Equalizers - GS2984 and GS2964 Key Features

 Both GS2984 and GS2964 are footprint compatible with GS2974A, GS2974B and GS1574A

3G-SDI Reclocker’s - GS2985, GS2986 and GS2965 Key Features                    

SMPTE 424M, 292M, 344M and 259M compliant Supports data rates of 270Mbps, 1483.5Mbps, 1485Mbps, 2967Mbps, 2970Mbps & DVB-ASI at 270Mbps Auto and Manual Modes for data rate selection SD/HD indication O/P to control GS2978 cable driver (or the new GS2988 cable driver soon to be released) 4:1 input multiplexer on GS2985 and GS2986 2:1 input multiplexer on GS2965 Dual reclocked data outputs or one data output and one recovered clock output Loss of Signal (LOS) & Lock Detect outputs On-chip Input and Output termination Mute, Bypass and Auto bypass functions Selectable 400mVpp or 800mVpp output swings 27MHz crystal with cascadable buffer to support multiple reclockers from single crystal 4 wire SPI interface for device configuration and monitoring Input equalization and output de-emphasis settings to compensate for board trace dielectric losses Supply voltages of 3.3V or 2.5V Power consumption typically 180mW at 3G data rates and at 2.5V for all three variations Temperature range -40 to +85 deg.C 64 pin QFN package (9x9mm) for GS2985 40 pin QFN package (6x6mm) for GS2986 32 pin QFN package (5x5mm) for GS2965

3G-SDI Multi-Slew Rate Cable Drivers - GS2988 and GS2989 Key Features              

SMPTE 424M, SMPTE 292M, SMPTE 344M and SMPTE 259M compliant Capable of driving data rates up to 2.97Gbps GS2988 offers dual 75 ohm coaxial cable driving outputs with selectable slew rate to meet SMPTE compliance standards GS2989 offers four coaxial cable driving outputs Maximum output swing voltage of 1800mV Input trace equalization and output signal presence No external biasing resistors required at the inputs Supply voltages of 2.5V or 3.3V Both in 16 pin QFN package (4x4mm) Temperature range -40 to +85 deg.C Based on recommended board layout, Output Return Loss (ORL) is -20dB at HD data rates & -12dB at 3G data rates GS2988 is a slot in replacement for GS1578A, GS9077 and GS2978 GS2988 typical power consumption is 125mW at 2.5V supply and at 3G data rates with all outputs enabled GS2989 typical power consumption is 220mW at 2.5V supply and at 3G data rates with all outputs enabled

3G-SDI Reclocker Benefits       

Far lower output jitter in all SD/HD/3G data rates when compared to other industry offerings. Very low power consumption Support for a 27MHz crystal reference. 4-wire SPI interface for configuration and monitoring of multiple GS29xx’s being daisy chained together. Extended temperature range of -40 to +85 deg.C. Output de-emphasis to compensate for pcb trace dielectric losses. Up to 40 inches of FR4 trace loss is supported on the inputs and 20 inches on the outputs.

3G-SDI Cable Driver Benefits      

Lowest output jitter and power consumption compared to other industry offerings Input trace equalization supports up to 10 inches of FR4 trace loss Output signal presence indicates whether an active signal is present at the outputs of the GS298x A disable pin powers down the output drivers leaving them in a high impedance output state - saves more power Extended temperature range of -40 to +85 deg.C Wide voltage output swing of 1.8Vpp

3

C onverters

LTC2656-12 - Octal 16-/12-Bit Rail-toRail DACs with 10ppm/C Max Reference 16-Bit Octal SPI DAC Achieves ±4LSB INL (Max) The LTC2656 is a family of octal 16-/12-bit rail-to-rail DACs with a precision integrated reference. The DACs have built-in high performance, rail-to-rail, output buffers and are guaranteed monotonic.The LTC2656-L has a full-scale output of 2.5V with the integrated 10ppm/°C reference and operates from a single 2.7V to 5.5V supply. The LTC2656-H has a full-scale output of 4.096V with the integrated reference and operates from a 4.5V to 5.5V supply. Each DAC can also operate with an external reference, which sets the DAC full-scale output to two times the external reference voltage. These DACs communicate via a SPI/MICROWIRE™ compatible 4-wire serial interface which operates at clock rates up to 50MHz. The LTC2656 incorporates a power-on reset circuit that is controlled by the PORSEL pin. If PORSEL is tied to GND the DACs reset to zero-scale. If PORSEL is tied to VCC, the DACs reset to mid-scale.

Features  Precision 10ppm/°C Max Reference  Maximum INL Error: ±4LSB at 16 Bits  Guaranteed Monotonic over Temperature  Selectable Internal or External Reference  2.7V to 5.5V Supply Range (LTC2656-L)  Integrated Reference Buffers  Ultralow Crosstalk Between DACs(<1nV•s)  Power-On-Reset to Zero-Scale/Mid-scale  Asynchronous LDAC Update Pin  Tiny 20-Lead 4mm × 5mm QFN and 20-Lead Thermally Enhanced TSSOP Packages

Applications  Mobile Communications  Process Control and Industrial Automation  Instrumentation  Automatic Test Equipment  Automotive

4

For more information, including pricing, availability, datasheets and samples (if available), please visit http://uk.nuhorizons.com/FeaturedProducts



The KSZ8873MLL, KSZ8873RLL, KSZ8873FLL, and KSZ8873MML are highly integrated 3-port switch on a chip ICs in one of the smallest footprints. They are designed to enable a new generation of low port count, cost-sensitive and power-efficient 10/100Mbps switch systems. Low power consumption, advanced power management and sophisticated QoS features (e.g., IPv6 priority classification support) make these devices ideal for IPTV, IP-STB, VoIP, automotive and industrial applications.

D atacom

KSZ8873: 3-port Ethernet Switch A new generation of low port count, costsensitive and power-efficient 10/100Mbps switch on a chip ICs

The KSZ8873 family is designed to support the GREEN requirement in today’s switch systems. Advanced power management schemes include hardware and software power down, as well as the energy detect mode that shuts downs the transceiver when a port is idle. KSZ8873MLL, KSZ8873RLL, and KSZ8873FLL also offer the by-pass mode, which enables system-level power savings. In this mode, the processor connected to the switch through the MII interface can be shut down without impacting the normal switch operation.

Features

Benefits

 Single 2.5V or 3.3V supply with internal 1.8V LDO, and optional 3.3V, 2.5V or 1.8V VDDIO

 Enables low power design

 Port 1 & Port 2 by-pass mode  4-queue (per port) traffic prioritization, based on port, 802.1p, 802.1Q VLAN tags, or Differential Services (both Ipv4 and Ipv6 priority classification)  Source address filtering  Internal generated RMII 50MHz clock (KSZ8873RLL)  LinkMD® TDR-based cable diagnostics

 Ethernet traffic between Port 1 and Port 2 are sustained while the MII interface (Port 3) is shut down. This allows the device connected to the MII interface to enter a power saving mode  Enables the implementation of advanced QoS policies  Enables the implementation of Ethernet ring network for industrial control and automotive applications  Eliminates expensive external 50MHz oscillator for the RMII mode  Allows identification of common cabling problems, including those not addressed by IEEE. Simplifies network deployment and reduces network downtime

Applications  VoIP Phone  Set-top/Game Box  Automotive  Industrial Control  IPTV POF  SOHO Residential Gateway  Broadband Gateway / Firewall / VPN  Integrated DSL/Cable Modem  Wireless LAN access point + gateway  Standalone 10/100 switch

KSZ8873 Block Diagram

LinkMD is a registered trademark of Micrel, Inc.

5

Power & Battery Management

Power System Design Fast ■ Easy ■ Flexible EXAR’s highly configurable digital power step-down controllers, the XRP7704 and XRP7740, more intelligently manage today’s power systems with up to four independent digital-control loops while integrating an on-board standby power LDO. With four 12-bit resolution digital pulse width modulators (DPWM) with integrated gate drivers, the XRP7704 and XRP7740 use a digital PID control algorithm to perform full digital loop control at switching frequencies up to 1.5MHz. These power system controllers are fully addressable and configurable via an I²C interface for monitoring, control and management of DC-to-DC point-of-load power conversions.

Features

Benefits

 4-channel step-down controllers w/standby LDO  Digital control loop

 Integrate the best of both worlds:

Low cost and flexibility of digital power management and





control, and the robust power capabilities of analog switching



power supplies

 No external passive components  Five PID coefficients

 4A/ XRP7704 and 15A/ XRP7740 per channel  On-board gate drivers  Up to 1.5MHz programmable operating frequency  0.9V to 5V programmable output voltage  6.5V-20V single input voltage  Independent channel (re) configurability  I²C configurability and control  Green/halogen free 40-pin QFN package

Applications  Computing: Servers, Storage Systems  Consumer: Set-top box (STB), Game Systems  Industrial: ATE, DC-DC converters, Video Processing  Plasma Display Panel (PDP)  Networking and Telecommunications Equipment

6



 Reduce development time to hours enabling a significant time-

to-market advantage

 Permit real-time power system adjustments during design, in

response to changing requirements or even after field-



deployment



 Built-in Low-Drop Out (LDO) for standby power, power

sequencing capability, and integrated gate drivers

Wireless

Fully (re)Configurable 4-Channel DC-to-DC Digital PWM Controllers with Integrated Drivers

The Spartan®-6 FPGA SP605 Evaluation Kit delivers all the basic components of the Xilinx Base Targeted Design Platform in one package. It provides a flexible environment for system design and provides customers reference design and examples on how to leverage features such as high-speed serial transceivers, PCI Express®, DVI, and/or DDR3. It includes an industrystandard FMC (FPGA Mezzanine Card) connector for future scaling and customization to specific applications and markets.

Key Features:

What’s Inside the SP605 Evaluation Kit:

 FPGA: XC6SLX45T FGG484-3CES Spartan-6  Configuration:

 SP605 Base Board with the XC6LX45T-FGG484 FPGA  ISE® Design Suite Logic Edition: (device-locked) for Spartan-6 LX45T FPGA



 Onboard JTAG configuration circuitry



 128MB Platform Flash XL



 Quad SPI Flash 64MB

 Includes ChipScope™ Pro and the ChipScope Pro Serial I/O Toolkit



 16MB Parallel (BPI) Flash





 System ACE 2G Compact FLASH (CF) Card



 JTAG

 Timing Driven Place and Route, SmartGuide™, and SmartXplorer Technology

 Memory:

 Includes PlanAhead™ Design Analysis Tool

 Documentation



 DDR3 Component Memory 1Gb



 Hardware Setup Guide



 16MB Parallel (BPI) Flash (Also available for configuration)



 Getting Started Guide



 Hardware User Guide



 IIC 8Kb IIC EEPROM



 Reference Designs User Guide

 Communications and Networking

Schematics and PCB files Universal 12V power supply Cables: 2 USB, 1 Ethernet, 1 DVI-VGA adapter Reference Designs and Demos



 10/100/1000 Tri-Speed Ethernet



 SFP transceiver connector



 GTX port (TX, RX) with four SMA connectors

   



 USB To UART Bridge



 Board Diagnostic Demo

 PCI Express x1 Edge Connector

 Expansion Connectors:



 Base System Reference Design featuring DSP48, Ethernet, Memory, and Serial Transceiver integration



 FMC-LPC connector (1 GTP Transceiver, 68 single-ended or 34 differential user defined signals)



 Multiboot Reference Design, featuring fail-safe configuration



 User GPIO with two SMA connectors



 Hardened Memory Controller Reference Design



 4 User I/O (Digilent 2x6 Header)

 Reference designs, demos, documentation, and applications delivered on USB FLASH drive to get started quickly



 Clocking:

 200 MHz Oscillator (Differential)



 Oscillator socket (Single-Ended)



 SMA Connectors for external clock (Differential)



 GTX Reference Clock port with 2 SMA connectors

D evelopm ent Tools

Spartan-6 FPGA SP605 Evaluation Kit

 Display:

 Video - DVI / VGA



 16x2 LCD character display



 4X LEDs

Ordering information Part number— EK-S6-SP605-G  Price -- $495

Nu Horizons offers a wide range of development/evaluation boards, tools and kts. For more information, please visit http://uk.nuhorizons.com/development/

7

Enhance Your Design...

With Nu Horizons Education and Development Solutions

http://uk.nuhorizons.com/FeaturedProducts

http://uk.nuhorizons.com/labcam/

Portal is a monthly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.

LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/ or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.

Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.

http://uk.nuhorizons.com/seminars/index.asp

Online Learning Center www.nuhorizons.com/olc

Application Notes www.nuhorizons.com/appnotes

Development Tools http://uk.nuhorizons.com/development/

Nu Horizons Online Learning Center is designed to provide a complete training experience for engineers — without having to leave the office. New supplier trainings are posted twice a month and range from new product overviews to in-depth technical training and potential design implementations. These live trainings are recorded and archived for your viewing convenience.

In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.

Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.