Featured Products
Focus on
P O W E R
XL375 Series Power Supply Family
N2Power's latest small, high efficiency XL375 AC -DC Series power supply family again leads the power density race. Our advanced technology yields a very small footprint, reduces wasted power, and offers the highest power density in its class. High efficiency means reduced energy costs, greater return on your investment, greater reliability and longer product life.
In This Issue:
July 2009
AC-DC Power Supplies
LPS100-M & LPS200-M Medical & ITE Approved AC-DC Power Supplies High Efficiency 100-250 Watts MEDICAL & ITE SAFETY APPROVALS The LPS100-M and LPS200-M features ITE, non-patient contact and non-patient critical medical safety approvals. In addition, the units comply with the rigorous EN55022-B and FCC part 15 Level B EMC conducted and meet all applicable immunity standards. These power supplies carry a wide set of safety approvals as well, with UL/TUV/cULus 60950-1. COMPACT OPEN-FRAME DESIGN Both series utilize a compact open-frame design. The LPS100-M has a 2 x 4 inch footprint with a height of 1.29 inches and the LPS200-M has a 3 x 5 inch footprint with a height of 1.32 inches.
LPS103-M
USE ANYWHERE IN THE WORLD The LPS100-M and LPS200-M offer a unversal input of 90-264 Vac enabling these power supplies to be used anywhere in the world and are capable of operating from a 120-300 Vdc input. APPLICATIONS The power supplies are primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and nonpatient critical use in low power medical, dental and laboratory applications.
Features
Benefits
Applications
Compact open-frame footprints Less than 1U high 88% efficiency at full load Power density: 11-14 watts/in3 Medical & ITE safeties Remote sense & power fail Adjustable main output Isolated 12 V fan output Enclosure kit available
Perfect for space restricted applications Universal AC input for global use Pre-approved for medical & ITE applications Minimize input current distortion Compliance with international EN61000-3-2 standards Protections include: overvoltage, overtemperature & short-circuit conditions
Information Technology Industrial Systems Non-Patient Critical Medical Non-Patient Critical Dental Laboratory Equipment Instrumentation Servers & Storage Telecommunications
Series
Output
LPS100-M LPS200-M
Maximum Load
Peak Load
Regulation
3.1 A - 24 A
3.5 A - 30 A
± 2%
5.2A - 40 A
5.8 A - 44 A
± 2%
Convection Cooling
30CFM Forced Air
5 V - 48 V
2.1 A - 16 A
5 V - 48 V
2.6 A - 20 A
Visit www.PowerConversion.com/go/AC-DC for more information 2
LPS203-M
Small, high efficiency design: over 15 Watts per in3 POWER SUPPLY DESIGN LEADER N2Power's latest small, high efficiency XL375 AC -DC Series power supply family again leads the power density race. Our advanced technology yields a very small footprint, reduces wasted power, and offers the highest power density in its class. High efficiency means reduced energy costs, greater return on your investment, greater reliability and longer product life. UNMATCHED POWER DENSITY With an overall height of 1.5" and a 3.3" x 5" footprint, the XL375 Series boasts a power density over 15 watts per cubic inch. It is ideally suited for OEMs using the industry standard 1U chassis. Seven models deliver output voltages from 12V to 56V, and up to four units can be wire-OR'ed together to increase the total main output power up to 1,400 watts. HIGH EFFICIENCY IN A SMALL PACKAGE The XL375 Series delivers up to 93% efficiency. Our unique design reduces energy consumption and generates less heat. It requires little forced air cooling, decreases AC loading, increases reliability and economy of operation. Comparisons of efficiencies show that our supplies can reduce losses up to 50%. REPEATABLE QUALITY Each N2Power supply undergoes a complete functional test and a multi-hour burn-in to insure that every unit meets our stringent quality requirements. Each power supply design is also rigorously tested by UL, DEMKO, and European agencies, with scheduled factory audits to ensure ongoing compliance.
XL375-54 +54VDC
XL375-56 +56VDC
Benefits
Active current sharing for N, N+1 Remote On / Off 5V standby supply 12V aux output
Applications
Requires little forced air cooling High power density: >15W / in3 Saves design space Reduced power consumption Increased reliability
Telecom systems Test and measurement Gaming systems LED lighting control systems
±3
30.0
100 mV
12
±5
1.0
80 mV
V3
5sb*
±5
1.0
50 mV
V1
24
±3
15.0
200 mV 80 mV
V2
XL375-48 +48VDC
375W AC-DC 12V, 24V, 28V, 40V, 48V, 54V and 56V models 3.3” x 5” x 1.5” footprint Up to 93% efficient
12
V1 XL375-12 +12VDC
XL375-40 +40VDC
RIPPLE & NOISE (P-P)
VOLTAGE
XL375-28 +28VDC
Features
MAXIMUM CURRENT (A)
OUTPUT
XL375-24 +24VDC
XL375-12 AC -DC
REGULATION(%)
MODEL
AC-DC Power Supplies
N2Power™ Launches XL375 Series Power Supply Family
V2
12
±5
1.0
V3
5sb*
±5
1.0
50 mV
V1
28
±3
12.8
200 mV 80 mV
V2
12
±5
1.0
V3
5sb*
±5
1.0
50 mV
V1
40
±3
9.0
200 mV
V2
12
±5
1.0
80 mV
V3
5sb*
±5
1.0
50 mV
V1
48
±3
7.5
200 mV
V2
12
±5
1.0
80 mV
V3
5sb*
±5
1.0
50 mV
V1
54
±3
6.7
200 mV
V2
12
±5
1.0
80 mV
V3
5sb*
±5
1.0
50 mV
V1
56
±3
6.4
200 mV
V2
12
±5
1.0
80 mV
V3
5sb*
±5
1.0
50 mV
All outputs are isolated from the chassis and share a common return. *12Vsb optional
3 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Av ai
la b
le
no w
fr om
Offering of
Input Ranges
From the Industry’s largest supplier of board mount power
UEI15 Series UEI30 Series
UEI Series
UWE Series
UQQ Series
tUltra-wide input ranges: 9-36V & 18-75V tIndustry standard open frame package and pinout tOutstanding thermal derating performance tHigh efficiency; excellent power density Series
Package
Power
Output Voltages
Data Sheet
UEI15
1 x 1”
15W
3.3 to 15Vout
http://www.murata-ps.com/uei15
UEI30
1 x 2”
30W
3.3 to 15Vout
http://www.murata-ps.com/uei30
1.6 x 2”
50-60W
3.3 to 15Vout
http://www.murata-ps.com/uei
UWE
1/8 Brick
to 75W
3.3 to 24Vout
http://www.murata-ps.com/uwe
UQQ
1/4 Brick
to 100W
3.3 to 24Vout
http://www.murata-ps.com/uqq
UEI
www.murata-ps.com
The MIC3230/1/2 are constant current boost switching controllers specifically designed to power one or more strings of high power LEDs. The MIC3230/1/2 have an input voltage range from 6V to 45V and are ideal for a variety of solid state lighting applications. The MIC3230/1/2 utilizes an external power device which offers a cost conscious solution for high power LED applications. The powerful drive circuitry can deliver up to 70W to the LED system. Power consumption has been minimized through the implementation of a 250mV feedback voltage reference providing an accuracy of ±3%. The MIC323x family is dimmable via a pulse width modulated (PWM) input signal and also features an enable pin for low power shutdown.
Features
Applications
6V to 45V input supply range Capable of driving up to 70W Ultra low EMI via dithering on the MIC3231 Programmable LED drive current Feedback voltage = 250mV ±3% Programmable switching frequency (MIC3230/1) or 400kHz fixed frequency operation (MIC3232) PWM Dimming and separate enable shutdown Frequency synchronization with other MIC3230s Protection features: Over Voltage Protection (OVP) Over temperature protection Under-voltage Lock-out (UVLO)
Street Lighting Solid State Lighting General Illumination Architectural Lighting Constant Current Power Supplies
Boost Controller
High Voltage, High Power LED Drivers Synchronization, Dithering and Fixed Frequency Boost Controller
5 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
C urrent D river
4-Channel Adjustable Current I²C Controlled LED Driver Full Color Spectrum RGBW/RGBA Software Control The XRP7620 is a multi purpose 4-channel independently adjustable current sink driver. Optimized for LED backlighting and RGBW/ RGBA color mixing applications, the XRP7620 can also be used as a generic software programmable current sink I/O expander. Support an industry standard 2-line I²C serial interface, the XRP7620 provides full independent control of each channel and can be programmed up to a current of 31.5mA in steps of 500μA. Uniform display brightness is ensured through a better than 3% channel to channel current matching. Five internal registers are provided to set operational configuration and individual channel current adjustment. A specific shutdown mode allows the device to retain the previously loaded configuration – operational and current adjustment – in order to be reused upon the next enabling. The XRP7620 is designed to operate from a single cell lithium-ion battery or fixed 3.3V or 5.0V power rails and is available in a RoHS compliant, “green”/halogen free space saving 8-pin 2mm x 3mm DFN package.
Features
Benefits
4-Channel LED Current Sink Driver
First LED Driver to Support the I²C Bus Interface Extremely Small Packaging Size Ideal for Tight Design Environments: LCD and Keypad Backlighting, Mobile Applications Device can be Driven from Single Cell Lithium-ion Battery or
Individual Channel Current Control
Up to 31.5mA per channel / 500μA Steps
100mV Channel Dropout Voltage
I²C Serial Interface Control
Fixed 3.3V or 5.0V Power Rails
2.7V - 5.5V Input Voltage Range 3% Channel Current Matching Configuration Retention in Shutdown Shutdown Current <1μA Thermal and UVLO Built-in Protection “Green”/Halogen Free 2x3mm 8-Pin DFN package
XRP7620 Block Diagram
6
Applications Color Coded Indicator Lighting RGBW/RGBA Color Mixing Cell Phones & Handheld Devices Generic Current Sink I/O Expander
Wide input range, current mode, DC/DC controller capable of generating either + or – output voltages The LT3757 is a wide input range, current mode, DC/DC controller which is capable of generating either positive or negative output voltages. It can be configured as either a boost, flyback, SEPIC or inverting converter. The LT3757 drives a low side external N-channel power MOSFET from an internal regulated 7.2V supply. The fixed frequency, current-mode architecture results in stable operation over a wide range of supply and output voltages.
D C /D C C ontroller
LT3757 - Boost, Flyback, SEPIC and Inverting Controller
The operating frequency of LT3757 can be set with an external resistor over a 100kHz to 1MHz range, and can be synchronized to an external clock using the SYNC pin. A low minimum operating supply voltage of 2.9V, and a low shutdown quiescent current of less than 1μA, make the LT3757 ideally suited for battery-operated systems. The LT3757 features soft-start and frequency foldback functions to limit inductor current during start-up and output short-circuit. The device is available in a small 10-lead DFN (3mm × 3mm) or MSOP package.
Features Wide Input Voltage Range: 2.9V to 40V Positive or Negative Output Voltage Programming with a Single Feedback Pin Current Mode Control Provides Excellent Transient Response Programmable Operating Frequency (100kHz-1MHz) with One External Resistor Synchronizeable to an External Clock Output Overvoltage Protection Low Shutdown Current < 1μA Internal 7.2V Low Dropout Voltage Regulator Programmable Input Undervoltage Lockout with Hysteresis Programmable Soft-Start Small 10-Lead DFN (3mm × 3mm) and Thermally Enhanced 10-Pin MSOP Packages
Applications Automotive and Industrial Boost, Flyback, SEPIC and Inverting Converters Telecom Power Supplies Portable Electronic Equipment
7 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
D C -D C C onverters
SynQor’s Ruggedized DC-DC Converters The power behind Industrial Application Products
Industrial Application Products InQor DC-DC ®
SynQor’s ruggedized dc-dc converters and filters are designed for a wide range of industrial SynQor’s ruggedized dc/dc converters and applications including those required to withstand ¿OWHUVDUHGHVLJQHGIRUDZLGHUDQJHRILQGXVWULDO harsh environments: railway and transportation DSSOLFDWLRQVLQFOXGLQJWKRVHUHTXLUHGWR systems, industrial motion control, information ZLWKVWDQGKDUVKHQYLURQPHQWVUDLOZD\DQG displays, factory automation and power generation WUDQVSRUWDWLRQV\VWHPVLQGXVWULDOPRWLRQ systems. Featuring a two-stage power topology FRQWUROLQIRUPDWLRQGLVSOD\VIDFWRU\DXWRPDwith synchronousrectification that greatly improves WLRQDQGSRZHUJHQHUDWLRQV\VWHPV)HDWXULQJ efficiency and optimizes the power dissipated by DWZRVWDJHSRZHUWRSRORJ\ZLWKV\QFKURQRXV the converter. UHFWL¿FDWLRQWKDWJUHDWO\LPSURYHVHI¿FLHQF\DQG
7KH,Q4RU®6HULHVGFGFFRQYHUWHUDUH RIQH[WJHQHUDWLRQERDUGPRXQWDEOH VZLWFKLQJIUHTXHQF\GFGFFRQYHUWHUV FKURQRXVUHFWL¿FDWLRQWRDFKLHYHH[WUH FRQYHUVLRQHI¿FLHQF\(DFKPRGXOHLV SOHWHO\HQFDVHGWRSURYLGHSURWHFWLRQ HQYLURQPHQWVVHHQLQPDQ\LQGXVWULDO WLRQDSSOLFDWLRQV
RSWLPL]HVWKHSRZHUGLVVLSDWHGE\WKHFRQYHUWHU
Product Highlights Isolated DC-DC Converters Ŷ Ŷ Ŷ Ŷ Ŷ
Product Family: InQor +LJKHI¿FLHQF\XSWR ,QSXWYROWDJHUDQJHVIURP9WR9 2XWSXWSRZHUXSWR: &RQGXFWLRQFRROHGUXJJHGL]HGSDFNDJH
Non-Isolated DC-DC Converters Ŷ Ŷ Ŷ Ŷ Ŷ
http://www.synqor.com/inqor
Operational
Ŷ +LJKHI¿FLHQF\DWIXOOUDWHGFXUUHQW Ŷ 'HOLYHUVPD[LPXPRXWSXWFXUUHQWZ Ŷ Ŷ Ŷ Ŷ
PLQLPDOGHUDWLQJ :LGHRSHUDWLQJLQSXWYROWDJHUDQJH )L[HGIUHTXHQF\VZLWFKLQJSURYLGHV (0,SHUIRUPDQFH 1RPLQLPXPORDGUHTXLUHPHQWV &RQGXFWLRQFRROHGUXJJHGL]HGSDF
http://www.synqor.com/niqor
Product Family: NiQor 8OWUDKLJKHI¿FLHQF\XSWR 2XWSXWFXUUHQWVXSWR$ 2QERDUGLQSXWDQGSXWSXW¿OWHULQJ 6XLWDEOHIRUXVHLQ,QWHUPHGLDWH%XV$UFKLWHFWXUHV,%$
Product Matrix 2:1 Vin IQ12 Input Range: 9-25V Max. Power: 182W Eff. @3.3V: 91%
High Voltage Non-Isolated DC-DC Converters http://www.synqor.com/niqor/niqor-hivolt.html IQ24 Ŷ Ŷ Ŷ Ŷ Ŷ
Product Family: NiQor (High-Voltage) 8OWUDKLJKHI¿FLHQF\XSWR :LGHLQSXWYROWDJHUDQJHV99DQG9 0D[LPXPLQSXWRXWSXWFXUUHQWVXSWR$ 6XLWDEOHIRUXVHLQ,QWHUPHGLDWH%XV$UFKLWHFWXUHV,%$
EMI Filters
Input Range: 18-50V Max. Power: 504W Eff. @3.3V: 93%
Product Families
KWWSZZZV\QTRUFRP¿OWHUV Ŷ Ŷ Ŷ Ŷ Ŷ
Product Family: InQor &WR&RSHUDWLRQ 9,QSXWYROWDJHUDQJH9WUDQVLHQWV $RXWSXWFXUUHQW 6WDELOL]LQJEXONFDSDFLWRUDQGGDPSLQJUHVLVWRULQFOXGHG
IQ48 Input Range: 34-75V Max. Power: 255W Eff. @3.3V: 91% IQ72 Input Range: 42-110V Max. Power: 150W Eff. @3.3V: 91%
8
IQ70 Input Range: 3 Max. Power: 2 Eff. @3.3V: 91
IQ1B Input Range: 66-160V Max. Power: 150W Eff. @3.3V: 91% IQ4H Input Range: 180-425V Max. Power: 150W Eff. @3.3V: 90%
®
w w w. s y n q o r.co m
IQ18 Input Range: 9 Max. Power: 1 Eff. @3.3V: 91
SynQor’s ruggedized dc/dc converters... the power behind industry www.synqor.com www.synqor.com
®
SynQo
The power behind industry
D C -D C C onverters
InQor® DC-DC Converters InQor DC-DC Converters
InQor DC-DC
HQYLURQPHQWVVHHQLQPDQ\LQGXVWULDODQGWUDQVSRUWDWLRQDSSOLFDWLRQV
7KH,Q4RU®6HULHVGFGFFRQYHUWHUDUH RIQH[WJHQHUDWLRQERDUGPRXQWDEOH VZLWFKLQJIUHTXHQF\GFGFFRQYHUWHUV FKURQRXVUHFWL¿FDWLRQWRDFKLHYHH[WUH FRQYHUVLRQHI¿FLHQF\(DFKPRGXOHLV SOHWHO\HQFDVHGWRSURYLGHSURWHFWLRQ HQYLURQPHQWVVHHQLQPDQ\LQGXVWULDO WLRQDSSOLFDWLRQV
®
The InQor® Series dc-dc converter are composed of nextgeneration, board-mountable, isolated, fixed switching 7KH,Q4RU®6HULHVGFGFFRQYHUWHUDUHFRPSRVHG frequency dc-dc converters that use synchronous rectification RIQH[WJHQHUDWLRQERDUGPRXQWDEOHLVRODWHG¿[HG to achieve extremely high power conversion efficiency. Each VZLWFKLQJIUHTXHQF\GFGFFRQYHUWHUVWKDWXVHV\Qmodule is supplied completely encased to provide protection FKURQRXVUHFWL¿FDWLRQWRDFKLHYHH[WUHPHO\KLJKSRZHU from the harsh environments seen in many industrial and FRQYHUVLRQHI¿FLHQF\(DFKPRGXOHLVVXSSOLHGFRPSOHWHO\HQFDVHGWRSURYLGHSURWHFWLRQIURPWKHKDUVK transportation applications.
Product Highlights
®
Product Highlights
Operational
%HQH¿WV
Ŷ +LJKHI¿FLHQF\DWIXOOUDWHGFXUUHQW Ŷ 'HOLYHUVPD[LPXPRXWSXWFXUUHQWZLWK
Ŷ +LJKSRZHUGHQVLW\PHDQVVPDOOHUVL]HPRUH Ŷ +LJKHI¿FLHQF\DWIXOOUDWHGFXUUHQW ERDUGDUHDIRURWKHUIXQFWLRQV Ŷ 'HOLYHUVPD[LPXPRXWSXWFXUUHQWZ Ŷ /RZZHLJKWUHGXFHVVWUDLQGXULQJYLEUDWLRQ PLQLPDOGHUDWLQJ Ŷ :LGHUDQJHRIRXWSXWYROWDJHVIURP9RXW Ŷ :LGHRSHUDWLQJLQSXWYROWDJHUDQJH Ŷ 6\Q4RU¶VSURYHQGHVLJQVOHDGWRKLJKUHOLDELOLW\ Ŷ )L[HGIUHTXHQF\VZLWFKLQJSURYLGHV
Ŷ Ŷ Ŷ Ŷ
PLQLPDOGHUDWLQJ :LGHRSHUDWLQJLQSXWYROWDJHUDQJH )L[HGIUHTXHQF\VZLWFKLQJSURYLGHVSUHGLFWDEOH (0,SHUIRUPDQFH 1RPLQLPXPORDGUHTXLUHPHQWV &RQGXFWLRQFRROHGUXJJHGL]HGSDFNDJH
Operational
DQGTXDOLW\
(0,SHUIRUPDQFH
Ŷ 6LQJOHERDUGSURGXFWLRQ±VKRUWOHDGWLPHV Ŷ 1RPLQLPXPORDGUHTXLUHPHQWV ÀH[LELOLW\ Ŷ &RQGXFWLRQFRROHGUXJJHGL]HGSDF
Product Matrix
Product Matrix Input Voltage Range
2:1 Vin IQ12 Input Range: 9-25V Max. Power: 182W Eff. @3.3V: 91% IQ24 Input Range: 18-50V Max. Power: 504W Eff. @3.3V: 93%
Product Families
4:1 Vin
IQ72 Input Range: 42-110V Max. Power: 150W Eff. @3.3V: 91%
2:1 Vin IQ12 Input Range: 9-25V Max. Power: 182W Eff. @3.3V: 91%
IQ18 Input Range: 9-40V Max. Power: 182W Eff. @3.3V: 91% IQ36 Input Range: 18-75V Max. Power: 220W Eff. @3.3V: 92%
IQ48 Input Range: 34-75V Max. Power: 255W Eff. @3.3V: 91%
8:1 Vin
IQ70 Input Range: 34-135V Max. Power: 240W Eff. @3.3V: 91%
IQ32 Input Range: 9-75V Max. Power: 165W Eff. @3.3V: 88%
IQ24 Input Range: 18-50V Max. Power: 504W Eff. @3.3V: 93% IQ64 Input Range: 18-135V Max. Power: 200W Eff. @3.3V: 90% Product
Families
IQ48 Input Range: 34-75V Max. Power: 255W Eff. @3.3V: 91% IQ90 IQ72 Input Range: Input 34-160V Range: 42-110V Max. Power: Max. 228W Power: 150W Eff. @3.3V: 90% 91% Eff. @3.3V:
IQ1B Input Range: 66-160V Max. Power: 150W Eff. @3.3V: 91%
IQ1B Input Range: 66-160V Max. Power: 150W Eff. @3.3V: 91%
IQ4H Input Range: 180-425V Max. Power: 150W Eff. @3.3V: 90%
IQ4H Input Range: 180-425V Max. Power: 150W Eff. @3.3V: 90%
®
w w w. s y n q o r. co m
SynQor’s ruggedized dc/dc converters... the power behind industry www.synqor.com www.synqor.com
For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
IQ18 Input Range: 9 Max. Power: 1 Eff. @3.3V: 91
IQ70 Input Range: 3 Max. Power: 2 Eff. @3.3V: 91
®
SynQo 9
Fundamentals of Electronics Courses Need a refresher or introduction on a new technology or new product design? Check out a TechOnline Fundamentals of Electronics Course. Each course is designed to provide you with an objective introduction to critical technologies and concepts within a specific electronics domain.
Spotlight on: Fundamentals of Linear Regulators Course Description A basic building block in power supply design, linear regulators provide an inexpensive, low noise, and easy-to-use solution for delivering the stable DC voltages needed to power the analog and digital electronics in applications of every type. This course will offer designers - especially those working with digita circuits - an overview geared to help them better select and use these vital components.
b What is a linear regulator? b Basic operation b Linear vs. switching regulators b Types of linear regulators b Basic specifications b Design considerations b Selecting a linear regulator b Trends Linear regulator FAQ b Real questions received by Linear Technology's technical support department The course will also include an example of a linear regulator application. http://www.techonline.com/learning/course/217100174
Upcoming Fundamentals of Electronics courses
b�Fundamentals of Mixed-Signal FPGAs b�Fundamentals of DSP Fundamentals of Embedded b�Systems Security
Fundamentals of Embedded b�Software Optimization
b�Fundamentals of Data Converters b�Fundamentals of FPGAs
b�Fundamentals of Microcontrollers Fundamentals of Multicore b�Processing
For other Fundamentals of Electronics Courses go to techonline.com/learning/course
TM
POWER SUPPLY DESIGN LEADER N2Power enters the DC-DC power supply market with comprehensive 125 watt and 160 watt families based on its proven XL125 and XL160 AC-DC Series products. Years of experience with these chassis translates directly to confidence right from the start of production. UNMATCHED POWER DENSITY Eight XL125 DC-DC models and seven XL160 DC-DC models deliver a range of outputs from 3.3V to 48V. Physical dimensions of just 1.25” x 3” x 5” mean easy integration into existing designs replacing older, less efficient products. They are also ideally suited for new OEM designs where the small formfactor frees up valuable “real estate” that can be reallocated to other purposes. HIGH EFFICIENCY IN A SMALL PACKAGE These new DC-DC Series supplies deliver up to 90% efficiency. Our unique design reduces energy consumption and generates less heat. It requires little forced air cooling, increases reliability and economy of operation. Comparisons of efficiencies show that our supplies can reduce losses up to 50%. REPEATABLE QUALITY Each N2Power supply undergoes complete functional testing and a multi-hour burn-in to insure that every unit meets stringent quality requirements. Each power supply design is rigorously tested by UL, DEMKO, and European agencies, with scheduled factory audits to ensure ongoing compliance.
MODEL
XL160-1DC
XL160-2DC
XL160-3DC
XL160-4DC
XL160-5DC
XL160-6DC
XL160-8DC
* Isolated outputs for + / - use
DC-DC Power Supplies
N2Power™ Launches 125W and 160W DC-DC Power Supplies
XL160DC-DC
Features
Benefits
125W and 160 W DC-DC 3.3V, 12V, 15V, 24V and 48V models 5V +12V and 5V ±12V models 1.5” x 3” x 5” footprint Up to 90% efficient Built in OR’ing diodes for N, N+1
Requires little forced air cooling Saves design space Reduced power consumption Increased reliability
Applications Telecom systems Test and measurement
Gaming systems LED lighting control systems
OUTPUT
VOLTAGE
REGULATION(%)
MAXIMUM CURRENT (A)
RIPPLE & NOISE (P-P)
V1
3.3
±2
15.0
50 mV
V2
5
±4
20.0
50 mV
V3
12
±5
6.0
120 mV
V4
-12
±5
1.0
120 mV
V1*
5
±3
32.0
50 mV
V2
12
±5
1.0
120 mV
V1*
12
±3
13.3
120 mV
V2‡
12
±5
1.0
120 mV
V1*
15
±3
10.7
150 mV
V2‡
12
±5
1.0
120 mV
V1*
24
±3
6.7
240 mV
V2‡
12
±5
1.0
120 mV
V1*
48
±3
3.3
480 mV
V2‡
12
±5
1.0
120 mV
V1
5
±4
20.0
50 mV
V2
12
±5
6.0
120 mV
V3
-12
±5
1.0
120 mV
‡ Isolated from main output
11 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
P FC C ontroller
NCP1608 is the newest device in the ON Semiconductor family of power factor correction (PFC) controllers. NCP1608 is specifically designed for use as a pre-converter in ac-dc adapters, electronic ballasts, and other medium power off-line converters (typically up to 350 W). It uses Critical Conduction Mode (CrM) to ensure near unity power factor across a wide range of input voltages and output power. NCP1608 minimizes the number of external components by integrating safety features, making it an excellent choice for designing robust PFC stages. Packaged in SOIC-8, the device is Pb-free and Halide-free.
General Features
Safety Features
Near Unity Power Factor No Input Voltage Sensing Requirement Latching PWM for Cycle−by−Cycle On Time Control (Voltage Mode) Wide Control Range for Excellent Noise Immunity Transconductance Error Amplifier High Precision Voltage Reference (±1.6% Over the Temperature Range) Very Low Startup Current Consumption (≤ 35 µA) Low Typical Operating Current Consumption (2.1 mA) Source 500 mA / Sink 800 mA Totem Pole Gate Driver Undervoltage Lockout with Hysteresis Pin−to−Pin Compatible with Industry Standards
Overvoltage Protection Undervoltage Protection Open/Floating Feedback Loop Protection Overcurrent Protection Accurate and Programmable On Time Limitation
Typical Applications Solid State Lighting Electronic Light Ballast AC Adapters, TVs, Monitors All Off−Line Appliances Requiring Power Factor Correction
12 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Wireless
NCP1608 Critical Conduction Mode PFC Controller Utilizing a Transconductance Error Amplifier
Delivers lowest-in-industry heat dissipation, eliminating the need for expensive heat sinks The LTC4266 is a quad Power Sourcing Equipment (PSE) controller designed for use in IEEE 802.3 Type 1 and Type 2 (high power) compliant Power over Ethernet (PoE) systems. The LTC4266 delivers lowest-in-industry heat dissipation by utilizing low Ron external MOSFETs and 0.25Ω sense resistors, eliminating the need for expensive heat sinks. External MOSFETs also provide a more robust solution compared to integrated MOSFETs.
P OE C ontroller
LTC4266 - Quad IEEE 802.3at Power Over Ethernet Controller
Advanced power management features include: selectable high speed 9.5-bit (1kHz) or high resolution 14.5-bit current and voltage readback, a 7-bit DAC for overcurrent (ICUT), a unique nonlinear 8-bit programmable current limit (ILIM) and versatile quick shutdown of preselected ports. PD Discovery uses a proprietary dual-mode 4-point detection mechanism ensuring the best immunity from false PD detection. Midspan PSEs are supported with 2-event classification and a two second backoff timer. Legacy highcapacitance device detection is available. The LTC4266 includes an I2C serial interface operable up to 1MHz. The LTC4266 is also a good choice for proprietary PoE PSE systems which may require more power than the new IEEE 802.3at standard allows. The LTC4266 can source up to 100W (4-pair) while otherwise remaining 100% compliant with IEEE 802.3at.
Features Four Independent PSE Channels Compliant with IEEE 802.3at Type 1 and 2 0.34Ω Total Channel Resistance 130mW/Port at 600mA Advanced Power Management
8-Bit Programmable Current Limit (ILIM) 7-Bit Programmable Overload Currents (ICUT) Fast Shutdown of Preselected Ports 14.5-Bit Port Current/Voltage Monitoring 2-Event Classification
Very High Reliability 4-Point PD Detection: 2-Point Forced Voltage 2-Point Forced Current High Capacitance Legacy Device Detection LTC4259A-1 and LTC4258 Pin and SW Compatible Supports 2-Pair and 4-Pair Output Power 1MHz I2C Compatible Serial Control Interface Midspan Backoff Timer Supports Proprietary Very High Power Up to 100W Available in 38-Pin 5mm × 7mm QFN, and 36-Pin SSOP Packages
Applications PoE PSE Switches/Routers PoE PSE Midspans
13
fr om no w
inspectable LGA
OKL Series
10 & 16 Amp (SIP)
3 Amp (iLGA)
OKY Series
OKR Series
3, 5, 10 & 16 Amp (SMT)
3 Amp (SIP)
A New Breed of PoLs From the World’s No.1 DC/DC Converter Manufacturer tCompetitive alternative to DOSA PoL converters t Cost-effective compared to discrete designs inspectable LGA
t Outstanding thermal derating performance t Simulation software available on request
Input
Options
Voltage
Power
Voltage
VDC
W
VDC
On/Off Logic Sequence / Track Pos Neg
Output Current
Efficiency
t OKL features inspectable Land Grid Array (iLGA) Package
Av ai la bl e
OKX Series
Root Part Number
93%
OKL-T/3-W12
93%
OKR-T/3-W12
OKL
3 Amp
0.591-5.5
15
12 (4.5-14)
OKR
3 Amp
0.591-5.5
15
12 (4.5-14)
0.75-3.63
10.9
5 (2.4-5.5)
94%
OKY-T/3-W5
0.75-5.5
15
12 (8.3-14)
92%
OKY-T/3-D12
0.75-3.63
18
5 (2.4-5.5)
96%
OKY-T/5-W5
0.75-5.5
25
12 (8.3-14)
92%
OKY-T/5-D12
3 Amp 5 Amp OKY 10 Amp
0.75-5.5
50
12 (8.3-14)
16 Amp
0.75-5.5
80
12 (8.3-14)
10 Amp
0.75-5.5
50
12 (8.3-14)
OKX 16 Amp
0.75-5.5
80
12 (8.3-14)
www.murata-ps.com/okami
94.5% OKY-T/10-D12
94.5% OKY2-T/10-D12 94%
OKY-T/16-D12
94%
OKY2-T/16-D12
94%
OKX-T/10-D12
94%
OKX2-T/10-D12
94%
OKX-T16-D12
94%
OKX2-T/16-D12
Small - Reliable - Efficient CONVENIENT DESIGN The LGA C-Series high-density power converters are packaged in a 16.26 x 16.26 mm outline and utilize an identical footprint for all models (3A, 6A, 10A and 20A) that provides designers a convenient power migration path as system requirements change. The power converter’s ultra compact Land Grid Array (LGA) packaging enables a uniform, low profile form factor ideal for space restricted boards. The LGA C-Series can be mounted on either side of many circuit boards and offers designers an opportunity to employ a variety of conductive cooling techniques via either surface. BEST-IN-CLASS FEATURES Fully equipped with a variety of best-in-class features including under-voltage lockout, differential remote sense, power good signal, output margining and shortcircuit protection, the LGA C-Series ensures a high power reliable unit at a competitive price point.
P ow er C onverters
LGA C-Series High Density Non-Isolated Board-Mount Power Converters
LGA10C-00SADJJ
MINIMAL OUTPUT DERATING The LGA C-Series delivers high efficiency of 92%, typical at full load under nominal conditions. Its ultra compact packaging and low profile construction allows for bilateral heat transfer and low apparent net thermal resistance once mounted on a typical circuit board. These enable the LGA modules to operate up to 85 °C max ambient temperature with almost no derating on the output for most versions. Various external heatsink accessories are also available if extended temperature operations are desired.
Features
Benefits
3A, 6A, 10A & 20A modules
Identical footprints for easy
15 - 100 W scalable power
16.26 x 16.26mm package
Flexible space management
Low Profile: 3.27mm typical
Compatible with variety of
92% typical efficiency
RoHS compliant
High power reliability
power migration path
input bus voltage
Applications
REDUCING MODULE TYPES With a wide adjustable output range from 0.59 to 5.1 Vdc through external resistor trimming, the LGA C-Series reduces the number of module types needed to support multiple applications.
Distributed Power Architecture
FPGA, ASIC, DSP Power
Battery Powered Applications
Enterprise Networks/Servers
Telecom Equipment
Storage/Memory/µProcessors
Industrial Equipment
Applications
Regulation
Model
Output Voltage Range
Input Voltage
Maximum Current
Line
Load
LGA03C-00SADJJ
0.59 - 5.1 VDC
3 - 13.8 VDC
3A
± 0.2%
± 0.5%
LGA06C-00SADJJ
0.59 - 5.1 VDC
3 - 13.8 VDC
6A
± 0.2%
± 0.5%
LGA10C-00SADJJ
0.59 - 5.1 VDC
3 - 13.8 VDC
10 A
± 0.2%
± 0.5%
LGA20C-01SADJJ
0.59 - 5.1 VDC
4.5 - 13.8 VDC
20 A
± 0.2%
± 0.5%
Visit www.PowerConversion.com/LGA for more information 15 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
P ow er MOS FETS
MDMesh V Powerful Efficiency ST 650V MOSFETS. MDMesh V is the innovative 650 V technology from STMicroelectronics, which minimizes losses in high efficiency applications.
It enables designers to
create products which use less energy by achieving the lowest on-resistance per chip size versus any comparable power MOSFET on the market today (in this voltage class). The technology is the most efficient on the market and saves energy which is normally lost in the power supply section of PC’s, TV sets,
Home Appliances and Motor drives.
Another key application area is renewable energy, where MDMesh V can save vital watts normally lost in power-control modules for generators such as solar panels.
Features
Benefits
Applications
Lowest Rds-on in TO-220, TO-247, D2PAK and DPAK packages for this class of MOSFETs Higher Vdss rating High dV/dt rating 100% Avalanche Energy tested
Better efficiency Lower heat dissipation Longer life, higher reliability
Computer & Telecom Power Supplies Lighting Solar Conversion Motor Control Consumer Power Supplies
VDS
Rds(on) Max
[V]
[Ω]
650
16
Part number
Id
Package
Status
[A]
0.022
STY112N65M5
93
MAX247
Sampling
0.038
STW77N65M5
66
TO-247
Sampling Production
0.079
STx42N65M5
33
TO-220/TO-220FP/ D2PAK/I2PAK/ TO-247
0.098
STx35N65M5
27
TO-220/TO-220FP/ D2PAK/ I2PAK/TO247
Sampling
0.119
STx32N65M5
24
TO-220/TO-220FP D2PAK/I2PAK TO-247
Sampling
0.139
STx30N65M5
21
TO-220/TO-220FP D2PAK/I2PAK TO-247
Sampling
0.179
STx21N65M5
17
TO-220/TO-220FP D2PAK/I2PAK TO-247
Sampling
0.299
STx16N65M5
12
TO-220/TO-220FP DPAK/IPAK
Production
0.410
STx12N65M5
8.5
TO-220/TO-220FP DPAK/IPAK
Samples August‘09
Tiny µModule Power Supplies Fit on Either Side of PC Board Linear Technology’s µModule DC/DC point-of-load power supply family is complete with built-in inductor, MOSFETs, bypass capacitors and compensation circuitry. These tiny, lightweight (1.7g) point-of-load regulators fit the tightest spaces on top or bottom of your board. Small size and impressive low thermal impedance allow high power conversion from a wide range of voltages. Our µModule DC/DC converters simplify the design of your FPGA-based system and are backed by rigorous testing and high product reliability.
µModule Power Supplies
Compact Power Supplies for FPGABased Systems
VOUT
Output
Min
Max
Current
Number
(V)
(V)
(V)
(V)
(A)
Current Share
VOUT
Max
Remote Sense
VIN
Min
PLL
VIN Part
Track, Margin
DC/DC µModule® Systems LGA Package Dimension (mm)
Comments
Ɣ High Current Buck (Step-Down) LTM4602
4.5
20
0.6
5
6
LTM4602HV
4.5
28
0.6
5
6
LTM4603
4.5
20
0.6
5
6
x
x
x
LTM4603HV
4.5
28
0.6
5
6
x
x
x
LTM4600
4.5
20
0.6
5
10
LTM4600HV
4.5
28
0.6
5
10
Up to 2
Pin compatible with LTM4600, LTM4600HV
Up to 4
Pin compatible with LTM4601, LTM4601HV
Up to 2
15 x 15 x 2.8
Pin compatible with LTM4602, LTM4602HV
LTM4601
4.5
20
0.6
5
12
x
x
x
LTM4601HV
4.5
28
0.6
5
12
x
x
x
LTM4601A
4.5
20
0.6
5
12
x
x
x
LTM4601AHV 4.5 Ɣ Low Current Buck (Step-Down)
28
0.6
5
12
x
x
x
LTM8020
4
36
1.25
5
0.2
-
6.25 x 6.25 x 2.3
Tiny 6.25mm x 6.25mm
LTM8021
3.6
36
0.8
5
0.5
-
6.25 x 11.25 x 2.8
Cooler temp and smaller than linear regulaor
LTM8022
3.6
Pin compatible with LTM4603, LTM4603HV Up to 4 LTM4601 or LTM4601HV with Extra LGA pads
36
0.8
10
1
-
11.25 x 9 x 2.8
Pin compatible with LTM8023
LTM8023 3.6 36 Ɣ Ultra-Low Noise Buck (Step-Down)
0.8
10
2
Up to 2
11.25 x 9 x 2.8
Pin compatible with LTM8022
LTM4606
4.5
28
0.6
5
6
x
x
-
LTM4612
4.5
36
3.3
15
6
x
x
-
LTM8032 Ɣ Aerospace & Military
3.6
36
0.8
10
1
LTM4600HVMPV
4.5
28
0.6
5
10
LTM4601AHVMPV
4.5
28
0.6
5
12
x
x
LTM4606MPV
4.5
28
0.6
5
6
x
x
-
2.375
5.5
0.6
5
8
x
x
Up to 3
9 x 15 x 2.8
4.5
36
3.3
15
6
x
x
-
15 x 15 x 2.8
LTM4608AMPV LTM4612MPV
-
15 x 15 x 2.8 9 x 15 x 2.8
For high speed I/O; Meets CISPR 22 Class B For high Vout, low noise, LTM4606 pin compatible EN55022 Class B Compliant
Up to 2 x
Up to 4
15 x 15 x 2.8
LTM8020MPV
4
36
1.25
5
0.2
-
6.25 x 6.25 x 2.3
LTM8022MPV Ɣ Low Voltage
3.6
36
0.8
10
1
-
11.25 x 9 x 2.8
LTM4604 and A version
2.375
5.5
0.8
5
4
LTM4608 and A version
2.375
5.5
0.6
5
8
x
2.7 2.7
5.5
0.6 0.6
55
8, 8,88
●x
LTM4605
4.5
20
0.8
16
5 to 12
x
LTM4607
4.5
36
0.8
25
5 to 12
x
4.5 LTM4609 Ɣ LED Driver & Current Source
36
0.8
34
5 to 12
●x
LTM8040
36
2.5
13
1
-55°C to 125°C
x
Up to 2
9 x 15 x 2.3
Only 2.3mm height
x
Up to 3
9 x 15 x 2.8
8A in 9x15mm LGA
xDual and Triple LTM4616 Ɣ Buck-Boost
4
Dual 8A or Single 16A
x
Up to 2
-
15 x 15 x 2.8
9 x 15 x 4.32
94% to 98% efficiency, external inductor, all pin compatible With dimming
17 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Application N otes
Nu Horizons Application Notes
In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.
Using Emerson Programmable Power Modules in Xilinx Virtex-5 and Spartan-3 FPGA Applications: A Step-By-Step Guide This step-by-step guide uses two example applications, a high-speed packet processor and a high-volume industrial application to show the key FPGA and Power considerations. It illustrates the various tools and techniques available to determine the power requirements of the FPGA, to select the right Emerson Programmable Power Modules and to guide the layout of the printed circuit board.
Creating a Power Subsystem for Xilinx Virtex-5 FPGAs using Linear Technology Power Devices: A Step-By-Step Guide Many modern applications use FPGAs to implement complex system level building blocks. FPGAs now require extensive power subsystems to provide the variety of voltages and high-power required for parallel I/O banks, FPGA Core, high-speed Serial I/O and various clocking, delay and analog-like functions. This application note provides a step-by-step guide for a design engineer who needs to quickly and efficiently create a Power subsystem using LTC power products for a Xilinx Virtex-5™ FPGA.
Creating a Power Subsystem for Xilinx Spartan-3A DSP FPGAs using Linear Technology Power Devices: A Step-By-Step Guide This step-by-step guide will use an example instrumentation application, a semiconductor wafer process control monitor with a high speed analog input, to demonstrate how to quickly and easily create a high-functionality, analog subsystem using a LTC AtoD converter and a Xilinx Spartan™-3DSP FPGA.
Creating a Power Subsystem for a Renesas SuperH™ Processor using HELDO™ Power Devices: A StepBy-Step Guide Creating a Power subsystem involves a variety of design considerations. This application note provides a step-by-step guide for a design engineer who needs to quickly and efficiently create a Power Subsystem using HELDO™ power management devices and a Renesas SuperH processor.
18
For the complete list of available Application Notes or to download visit www.nuhorizons.com/appnotes
Nu Horizons Line Card
• Discretes (Switching Diodes)
• Audio (DAC’s, ADC’s, Codec’s, SPDIF, Sample Rate
• • • •
Conv., DSP, USB) Memory (EEPROM, DAC + EEPROM) Networking (T1/E1/T3/E3 xcvr, PCM) Sensors (Hall Effect Sensor, 3d Compass) Video (NTSC/PAL Encoder/Decoder, A/V Switches, Video Gain Amp)
• • • • •
Discrete (Transistors, FET arrays, Thyristors, Triacs) Display (Vacuum – Fluorescent Display Drivers) LED Drivers (Constant Current Drivers) Motor Control (Brushless DC, Bi-Polar Stepper) Power (Linear Regulators, Buck/Boost/Fly back DC- DC, Charge Pumps)
• Device Server Modules • Embedded MCU / MPU (ARM7TDMI, ARM9926EJ) • Networking Modules (Wired/Wireless 802.3 /
802.11bg / 802.15.4
• •
•
•
• •
GPS, RF, WiMax, Zigbee) Memory (Flash, EEPROM, Modules) Microcontrollers (8051, AVR, ARM7TDMI, ARM926EJ) Multimedia & Imaging (CCD/CMOS Arrays, IR, Video) Network Storage (Data Storage, Switched Ethernet) Programmable Logic (FPGA, SPLD/CPLD) Sensors (Biometrics, RF, Smart Cards)
• •
(Formerly Astec / Artesyn)
AC-DC Switchers - Low Power (LP, NT, DA, DP, SSL) 25W-350W - Medium Power (MP) Up to 1200W - High Power (VS) Up to 2500W - Intelligent High Power (iVS) Up to 4860W DC-DC Modules (1/16 Brick, 1/8 Brick, ¼ Brick, ½
Brick, RF Power Brick)
• Industry Standard - Non Isolated Point-of-Load (C-Class, E-Class, F-Class) • Power Systems Engineering Services
• Data Converters (ADC, DAC) • Interface (PLB/PCI/I2C/SPI UART’s,
RS232/485/422 Transceivers.) • Power (Buck/Boost Regulator’s, Charge Pumps, LDO’s, DC/DC modules, Supervisors, PWM) • Storage (SAS/SATA Multipliers and Selectors) • Telecom (T1/E1/DS1/DS3/E3 LIU’s, SONET/SDH Framers, Mappers & Aggregators)
(Fiber Optics Division) • Optical Components (WDM Management, 850nm
• Fiber Optic Devices (10G FP TOSA & MM PIN
ROSA, OTDR FP Lasers, 2.5G DWDM DML, DFB TOSA & APD ROSA) • Optocouplers (Transistor Output, High Speed, Solid State Relays) • RF Modules (Zigbee) • RF Semiconductors (RFIC Switch, GaAs FET, GaAs PA, Si LD-MOSFET, CATV Hybrid, Si RFIC)
VCSELs & Detectors, 1310nm Lasers & Detectors, CML Transmitters) • Optical Transceivers (GBIC, XFP, MSA300, SFP, SFP+) • Passive Optics (WDM networks)
Gates / 50 – 300 MHz)
DDR2, 10/100 MAC, Mil-STD-1553, UART, DMA, Timer, GPIO) • Standard Cell ( 0.13µ - 0.25µ / 5M – 12M Gates / 150 – 333 MHz) • Structured ASIC ( 0.13µ - 0.35µ / 21K – 1.7M Gates / 50 – 250 MHz)
MOSFET gate drivers)
• Sensor and Imaging Arrays (Hall Effect Sensors) • Signal Conditioning (Solid State Relays,
Optocouplers)
DTMF)
• Telecom (Embedded Modem, MF Trunk signaling,
• Audio (Speakers-on-a-Chip, PC HD-Audio, PC HD-
Audio Modem Combo)
Demodulators, Surveillance / Security)
System Solutions, Digital Photo Frames)
• Dial-Up Access Modems (PC Dial-Up Modems,
19
Embedded Dial-Up Modems) • Broadband (ADSL Solutions, VDSL Solutions, SHDSL Solutions, Embedded Communications Software) • Passive Optical Networks (GPON, BPON)
Regulators, DC/DC µModules, LED Drivers, Hot Swap, PoE) • Signal Conditioning (Amplifiers, Comparators, Filters, Voltage References, Thermal Couple Compensators) • Wireless / RF (I/Q Modulators – Demodulators, Up & Down Converting Mixers, IF Amplifiers, PA, RF Log Detectors, RF Power Detector)
• Data Communications (10/100/1G/10G Ethernet
Switches, 10/100/1000/10G PHYs)
StrongARM, PPC & MIPS Systems Controller)
Storage Processors)
• Embedded MCU / MPU (ARM V5TE, PXA
• Power Management (POLA) • Storage (FAS/SATA/PATA, SAS/Fiberchannel, • Video (Format Converter) • Wireless / RF (802.11 Modules)
• Analog ( Drivers / Voltage & uC Supervisors /
Filters / Switches / Regulators)
Op Amps / References / Timers)
Swap, PCI/PCIX/PCIE, High Side, LDOs, DDR)
• Bus Device ICs ( USB / PC / PCMCIA / SMBus) • Ethernet ( 10/100 PHYs, Controllers, Switches) • Linear ICs ( Active Filters / Comparators /
• Precision Edge ICs ( Clock distribution, generation, synthesizers / Multiplexers, PLLs, buffers, CDRs)
data rate)
• Telecom (SERDES, CDR, Laser Drivers, TIA’s,
Supervisor I2C)
CPU)
Limiting Amps) • Video (HDMI, Equalizers, Cable Drivers, Reclockers, Optical Modules (SFP))
• RF (290 – 980 ISM band / ASK/FSK / 200kbps max • System Management ICs ( Fan Control / Thermal
• DRAM (DDR3 SDRAM, DDR2 SDRAM, DDR
SDRAM, SDRAM, RLDRAM, PSRAM)
UDIMM)
Combinations)
Speed NAND, Solid State Storage, Embedded USB)
• DRAM Modules (FBDIMM, RDIMM, SODIMM, • Memory (QDR/DDR SRAM, Zero-Wait SRAM
(NBT), Sync Burst SRAM, Specialty Sync-SRAM)
(Including ICS)
• Audio (2,4,8, & 10 Channel Codecs) • Clock Distribution (Synthesizers, Translators,
Oscillators, PLLs, Spread Spectrum, Video)
• Clock Generation (Fan-Out, Multiplexers, PLLs,
Translators, Programmable) Datacom (10/100BaseT Phys) Interface (PCIE Switches, Rapid I/O) Logic (FST, ALVC, LVC, FCT & BusSwitch) Memory (FIFO, SRAM, Multiport RAM) Telecom (Network Search Engines, T1/E1/J1 LIUs, Framers, ATMs, AFEs, TSIs) • Video (LVDS TX/RX, HDMI Multiplexer/Switches)
• • • • •
• Video (MPEG Encoders/Codecs, Video Decoders, • Imaging Solutions (Fax Modems, Fax and MFP
®
• Power and Battery Management (IGBT and
Current DAC)
• Frequency Control (Silicon Timing) • Interface (RS-232, 422/485, CAN PHY) • Power Management (Switching Regulators, Linear
• IP Repository ( ARM926EJ, 8051, USB, PCIE,
• Audio (Mux/Demux, Codec) • Image Processor (Scaler, Deinterlacer, Motion Co-
• Data Converters (Delta Sigma, SAR, Voltage DAC,
• Power Management ICs ( Battery, Display, Hot-
• Embedded Array ( 0.13µ - 0.5µ / 6K – 10.7M
PWM Control, LED/Lamp/Display Drivers) • RF Power (FETs, Drivers, Amplifiers, Microwave modules, RF Modules) • Solar Devices (Solar Cells, Solar Bits, Solar Die, Solar Battery Chargers)
• Sensors (Hall Effect)
• Analog (Data Conversion, Power Management) • Communications (Bluetooth, LIN, CAN, POTS,
• Power (MOSFET, IGBT, Diodes, Thyristors, DC/DC,
• Mobil DRAM (Mobil SDRAM, Mobil DDR SDRAM) • Multichip Packages (MobilDRAM & NAND Flash • NAND Flash Memory (Managed NAND, High (Formerly C&D Technologies)
• AC/DC Power Supplies (200 – 2000 Watts,
2.5VDC to 48 VDC Out – PCI Modules)
• Data Acquisition (Electronic Imaging, A/D
Converters, D/A Converters, Sample/Hold Amplifier, Multiplexers) • DC/DC Converters (0.25 to 340 Watts, 0.02 to 80 Amps, 1.2 to 48 VDC Out; 3 to 75 VDC In) • Digital Panel Meters (Voltmeters, Wire Meters, Process Monitors, AC/DC Ammeters) • Magnetics (Inductors & Transformers, Differential common-mode filters, Databus Isolators)
• Memory (DDR DRAM,SDRAM, EDO & FPO DRAM,
E2PROM, PSRAM, SRAM, DDR II Synchronous SRAM, Asynchronous SRAM) • Smart Card (Two-Wire Serial EEPROM, Secure, MCU Based, ICs)
• AC-DC Power Supplies (125 – 275 Watts, 12VDC
to 56 VDC Out, 90-264VAC In, 3” x 5” format)
• Power Systems Engineering Services
MCU based RF, Audio streaming)
• Communications (Voice & Audio CODECs, Pro-X
•
• •
•
SLICs, USB Audio Codec) Logic ICs (I/O Controllers, ISA Bridge, Power Management, Hardware Monitors, Clock Generators, Power I/C, Card Reader IC’s, IEEE1394) MPU (8-bit 80C51 based, 32-bit ARM7TDMI) Power (ACPI Controller, PWM, DDR Bus Term, Power Switch) Voice Solutions (Record & Playback ICs)
• Frequency Control (Oscillators, Crystals, VCXO,
Processor, CMOS Arrays)
ARM926E, Cortex M3)
TCXO, OCXO, Sine Wave Oscillator)
Triacs, Transistors)
• Embedded MCU / MPU (16/32 Bit MCUs) • Logic (Standard – High/Low Voltage, Interface,
Multi-Purpose) • Memory (Fast Flash, Low Power SRAM, EEPROM)
• Frequency Control (Oscillators, Optical Timing
ARM7TDMI / ARM946E – Full Development Tool Suites) • Memory (P2ROM, DRAM ) • MEMS (3D Accelerometers -3g to +3g) • Power Management (Linear (LDO) & Switching Voltage Regulators, Power Switch (USB) devices) • Speech (BGM Mixer - ADPCM & ADPCM2, Voice Synthesizers & Recorders, Audio Codec) • Telecom (ADPCM – Linear – PCMA-Law - VoIP Codec’s, Echo Cancellers, Transceivers) • Video (NTSC / PAL / SECAM Encoders – Decoders, NR-FIFO)
Clocks, Sine Wave Oscillator)
LDO, High Voltage Interface / Driver’s, PoE)
Filters, RFIC Transceivers)
ISM, Bluetooth, 802.11b)
802.11b, and Bluetooth)
• AC/DC Power Supplies (Industrial and Medical - 300W - 1500W) • DC/DC Converters
- Industry Standard (1/8-Brick, 1/4-Brick, 1/2-
• RF Modules (ZigBee, 802.15.4, UHF Mesh, FHSS
- Non-Isolated Point of Load - Intermediate Bus Converters (1/8-Brick, 1/4-
• Standalone RF modules (FHSS, 802.15.4,
Brick, Full Brick)
Brick, 1/2-Brick)
• Audio / Video (3 Input A/V Switch, Dual SCART • Flat Panel Displays (LCD – 2” to 65”) • Memory (Flash – NOR) • Optoelectronics (LEDs, Laser Diode, Photo
coupler, IrDA, photo interrupters, Emitters/Detectors, Sensors) • Power (LDO / Switching Regulators, LED Drivers, Solid State Relays)
A/V Switch)
Poly Phase Meter ICs)
Power Management, Interface ICs)
STM-1 / STS-3 / E4 & DS3 / E3 / STS-1 Transceivers)
• Modems (V22bis, Data Pumps, AFEs, DAAs) • Power Measurement Metering Control (Single/ • Smart Card Reader (SoC - Smart Card Reader & • WAN / LAN (10/100 PHY, 10Base2/5 - OC-3 /
3.2M / 5.17M Pixel)
• Data Interconnect (Signal Conditioners and
• Image Processors
• Amplifiers & Comparators (Audio, Op Amp, Gain
• Transducers (Ultrasound)
• RF Components (SAW Resonators, SAW RF & IF
• Analog Image Sensor (NTSC/PAL) • Digital Image Sensor (CIF, VGA, 1.3M / 2.0M /
• Optoelectronics (LED Drivers, EL Lamp Drivers) • Power (Switching, Automotive, PFC, Backlight,
®
• Connectivity (CAN, J1850) • Display Drivers (LCD / VFD Driver / Controllers) • Embedded MCU / MPU (4-Bit NX 63K /
• Image Sensor (Camera Modules, Imaging Signal
• Video (Demodulator, Decoders) • Motor Control (Controllers, Drivers, MCU’s) • Microcontrollers (8-bit, 16-bit, ARM7TDMI,
• Communications (CAN, LIN, ZigBee) • Discrete (Diodes, Power MOSFETS, Thyristors,
continued
Nu Horizons Line Card
• Wireless/RF (2.4G / 900M / 433M Transceiver,
Control, Level Detect/Sense, Video)
• Analog Switches (Audio, Data, Video) • Circuit Protection (EMI / RFI Filters) • Clock Management (Synthesizers, ZDB, PLL,
Skew Control, Fan-Out, Buffers, Timers)
• Digital Video Processors • Storage Products (Serial ATA - Parallel ATA,
Parallel ATA Controller, RAID Storage Processors, SATA Controllers, SATA Port Multipliers) • Video Transport (HDMI, DVI and iTMDS Products - Receivers, Transmitters, Switches, PHYs)
• Discretes (FETs, Transistors, Diodes, Rectifiers,
Retimers, Crosspoint Switches, Backplane, Switch Fabrics)
• Ethernet (10/100/1G/10G PHYs, 10/100/1G/10G
MACs, Switches, Transceivers)
Controllers, SATA Controls)
Photodiodes, CDR, MUX, DEMUX, Transceivers, PON)
Processors, TSI, Pointer Processors)
• Storage (FC, SerDes, Transceivers, SAS • Transport Physical Layer (TIAs, Amplifiers, • Transport Processing (VC, FEC, Network
• Interface (232 / 422 / CAN Tranciever, Modulator /
Thyristors)
• Logic (Gates, Inverters, MUX, Latches) • Power Management (PFC, Battery Management,
Demodulators., Smart / SIM)
• Controllers (Flash Memory Card Controller, USB
Supervisors, References, DC/DC Switchers, Off-Line Reg/Ctrl, LDO)
Flash Controller)
graphics engine, Mobile Graphics Coprocessor)
IC)
USB 2.0 Megapixal Image Controller)
• Memory (SDRAM / DDR1, Pseudo SRAM, Serial
Flash, Parallel Flash)
• Embedded Graphics (128-bit 2D/3D mobile
• Mobile Communication (Mobile Satellite TV Tuner • Multimedia SoC (MP3/WMA Digital Audio Player,
• High-Power Laser Diodes (Single, Laser Bar /
Stacks)
• Infrared (Photo detectors, Emitters, Sensors) • Intelligent Displays (Self-Contained LED Displays) • LED’s (Side / Radial / Top Emitters, Arrays, High
Power)
(Including SaRonix)
• Analog Switches (3-17V SPDT-SPST-DPST-MUX,
• • • •
Filters Inductors Isolators Transformers (Modem, Analog/Voice Switching,
DSL, Cable Modem, RJ45, PoE)
• Advanced I/O Controllers (USB-ATA, Southbridge) • Datacom Satellite Receiver (10/100 MAC/PHY
• Environmental (Temperature Sensors, Fan Control) • USB Solutions (Card Reader, Flash Drive, Disk
• Advanced / General Purpose FPGAs • CPLD (32 – 512 Macrocells, Low Power/High
Controller, 10/100PHY, Multimedia Processors, ArcNET, CircNET)
Drive, Hub, PHY)
Performance)
• Bridges (PCI, PCIX, PCI Express – 32/64Bit –
Synthesis & Implementation)
•
Custom HDMI/DVI-PCI-USB-LAN)
66/133MHz) Clock ICs ( VCXOs, Buffers, Drivers, Generators, Skew Controllers) Crystals & Oscillators (Quartz Crystal Resonators) Digital Switches (2-Port, Bus, Crossbar, DDR, Mux/DeMux, Low Voltage Translator) Interface (Re-Drivers, Buffers, Flip-Flops, Gates, Latches, Registers, Transceivers, Voltage Translators) Logic (ALVC, FCT, LCX, LPT) PCI Express Solutions (Packet/Signal Switches, Bridge, PHY, Signal Conditioning, Clock-Buffers/ Generators/Crystals) Translators (Voltage, I/O Signal)
• •
•
• •
•
• Development Platforms • Development Tools (DSP, Embedded Processing, • Intellectual Property (including PCIe, PCI,
• Power Management (AC/DC, Battery
• •
•
• • • •
Management, DC/DC, LDO, MPU - Supervisor, PoE, VDC References, AC Switches) Discretes (Thyristors, Diodes, FETs, Transistors) Signal Conditioning (Comparators, Op-Amps, Clamp Diode Arrays, Crowbar Diodes, EMI Filtering) Logic (3.3V, 5V, Translators, Gates, Switches, Port - Expansion) Sensors (Accelerometers, Proximity, Thermal, Touch) Interface (Smartcard) Wireless (Bluetooth, ZigBee, GPS, RFID) Audio (Decoders, Power Amps, Analog CPU, Digital CPU, Radio)
10/100/1G/10G Ethernet, MPEG4, FEC, PPC, µBlaze, PicoBlaze) • Services (Design Services, Training, XPA)
20
Enhance Your Design...
With Nu Horizons Education and Development Solutions
www.nuhorizons.com/portal
www.nuhorizons.com/labcam
Portal is a monthly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.
LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/ or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.
Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.
www.nuhorizons.com/xpresstrack
Online Learning Center www.nuhorizons.com/olc
Application Notes www.nuhorizons.com/appnotes
Development Tools www.nuhorizons.com/devtools
Nu Horizons Online Learning Center is designed to provide a complete training experience for engineers — without having to leave the office. New supplier trainings are posted twice a month and range from new product overviews to in-depth technical training and potential design implementations. These live trainings are recorded and archived for your viewing convenience.
In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.
Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.