Nataildo 4C85-200E-4005-0004-0000-7660-0800-35X3-0000-407M-MX37-**** (*) Windows XP 5.1 IA32 WinAspi: NT-SPTI used Nero Version: 7.11.3.0 Internal Version: 7, 11, 3, 0 (Nero Express) Recorder: Version: 1.00 - HA 1 TA 0 7.11.3.0 Adapter driver: HA 1 Drive buffer : 2048kB Bus Type : default CD-ROM: Version: 1.00 - HA 1 TA 0 7.11.3.0 Adapter driver: HA 1 === Scsi-Device-Map === DiskPeripheral : ExcelStor Technology J8080S
atapi Port 0 ID 0
DMA: On
CdRomPeripheral
atapi Port 2 ID 0
DMA: On
: HL-DT-ST DVD-RAM GH22NP20
=== CDRom-Device-Map === HL-DT-ST DVD-RAM GH22NP20 =======================
E:
CdRom0
AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte BUFE : 0 Physical memory : 767MB (785712kB) Free physical memory: 432MB (442468kB) Memory in use : 43 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 24.8.2009 ===== Disc-Copy over image - 1st step : Copy to image
...
18:02:34 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 18:02:35 #2 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 18:02:35 #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 1803872 NWA Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
-1 (gap
0)
18:02:35 #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 1803872 = 1803872, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options) 18:02:35 #5 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using DVD media 18:02:35 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1803871 (400:51.46, 3523MB) 18:02:35 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 18:02:35 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:02:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1803872 (1803872) = #1803872/400:51.47 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1803872 blocks [Image Recorder] -------------------------------------------------------------18:02:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3694329856, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_| _RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1803872 | 1803872 | 0x00 1803872 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 18:02:35 #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-No, small files-No (<64KB) 18:02:35 #12 Phase 120 File dlgbrnst.cpp, Line 1767 Creating the image for burning 18:02:35 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2733 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:02:35 #14 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 590400 18:02:43 #15 SPTI -1128 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128) Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 01 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 11 Buffer x07070240: Len x10000 18:02:43 #16 TRANSFER -25 File Reader.cpp, Line 253 Error reading data 18:02:43 #17 Text 0 File Reader.cpp, Line 256 Exception value: -1128 18:02:43 #18 CDCOPY -12 File DVDReader.cpp, Line 148 Unrecoverable read error at LBA 256 18:06:12 #19 Phase 40 File dlgbrnst.cpp, Line 1440 Aborted by user 18:06:12 #20 Phase 68 File dlgbrnst.cpp, Line 1767 Burn process aborted 18:06:12 #21 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 18:06:15 #22 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 18:06:15 #23 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed
===== Disc-Copy over image - 2nd step : Burn the image ... 18:02:34 #1 Text 0 File SCSIPTICommands.cpp, Line 450 LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 18:02:35 #2 Text 0 File SCSIPTICommands.cpp, Line 240 SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME 18:02:35 #3 Text 0 File DVDCopy.cpp, Line 320 DVD Track-Information from source disc: Media Type: DVD-R S01 T01 Con 0x14 Start 0 Len 1803872 NWA Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
-1 (gap
0)
18:02:35 #4 Text 0 File DVDCopy.cpp, Line 435 Max -1 tracks of 1 allowed to copy 1: 0 - 1803872 = 1803872, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
18:02:35 #5 Text 0 File Burncd.cpp, Line 3500 Turn on Disc-At-Once, using DVD media 18:02:35 #6 Text 0 File DlgWaitCD.cpp, Line 307 Last possible write address on media: 4718591 (1048:34.41, 9215MB) Last address to be written: 1803871 (400:51.46, 3523MB) 18:02:35 #7 Text 0 File DlgWaitCD.cpp, Line 319 Write in overburning mode: NO (enabled: CD) 18:02:35 #8 Text 0 File DlgWaitCD.cpp, Line 493 >>> Protocol of DlgWaitCD activities: <<< ========================================= 18:02:35 #9 Text 0 File ThreadedTransferInterface.cpp, Line 785 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 (1 - Data (mode 1)) 2 indices, index0 (150) not provided original disc pos #0 + 1803872 (1803872) = #1803872/400:51.47 not relocatable, disc pos for caching/writing not required/not required -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1803872 blocks [Image Recorder] -------------------------------------------------------------18:02:35 #10 Text 0 File ThreadedTransferInterface.cpp, Line 986 Prepare [Image Recorder] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x40; Session Closed, disc fixated Tracks 1 to 1: Idx 0 Idx 1 Next Trk 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3694329856, ISRC "" DAO layout: =========== ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_| _RecDep__________ 0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 0 | 0x41 | 0 | 0 | 0x00 0 | 1 | 1 | 0x41 | 1803872 | 1803872 | 0x00 1803872 | lead-out | 1 | 0x41 | 0 | 0 | 0x00 18:02:35 #11 Text 0 File Burncd.cpp, Line 4286 Caching options: cache CDRom or Network-No, small files-No (<64KB) 18:02:35 #12 Phase 120 File dlgbrnst.cpp, Line 1767 Creating the image for burning 18:02:35 #13 Text 0 File ThreadedTransferInterface.cpp, Line 2733 Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0 18:02:35 #14 Text 0 File ThreadedTransfer.cpp, Line 268 Pipe memory size 590400 18:02:43 #15 SPTI -1128 File SCSIPassThrough.cpp, Line 181 CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1128)
Sense Key: 0x03 (KEY_MEDIUM_ERROR) Sense Code: 0x11 Sense Qual: 0x00 CDB Data: 0x28 00 00 00 01 00 00 00 20 00 00 00 Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 11 Buffer x07070240: Len x10000 18:02:43 #16 TRANSFER -25 File Reader.cpp, Line 253 Error reading data 18:02:43 #17 Text 0 File Reader.cpp, Line 256 Exception value: -1128 18:02:43 #18 CDCOPY -12 File DVDReader.cpp, Line 148 Unrecoverable read error at LBA 256 18:06:12 #19 Phase 40 File dlgbrnst.cpp, Line 1440 Aborted by user 18:06:12 #20 Phase 68 File dlgbrnst.cpp, Line 1767 Burn process aborted 18:06:12 #21 Text 0 File SCSIPTICommands.cpp, Line 287 SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME 18:06:15 #22 Text 0 File SCSIPTICommands.cpp, Line 450 UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL 18:06:15 #23 Text 0 File Cdrdrv.cpp, Line 11412 DriveLocker: UnLockVolume completed Existing drivers: Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)