LubeCentralTM Hi-Flow Oil & Coolant Fittings Are your Oil & Coolant service times - s l o w - and forcing DIRT into your valuable machinery fluids? If so, the range of Banlaw LubeCentralTM Hi-Flow Oil & Coolant fittings may solve these common problems
• HIGHER FLOW CAPACITY:
• SAFETY:
Fittings have been designed to handle higher flowrates with reduced pressure drop.
All fittings incorporate Dry-Break Technology to eliminate spillage
• FLUSH FACE:
Higher safe working pressure.
Reduced ingress of contamination into fluids. Simply wipe fittings prior to connection.
• PUSH TO CONNECT: No need to retract actuator collar during connection.
• INCREASED DURABILITY: Oil Fittings are manufactured from zinc plated steel, with anodised aluminium hose tails. Coolant fittings are manufactured from corrosion resistant brass.
Colour coded for quick easy identification. Each set is unique and cannot be accidentally connected. Ensures “right fluid into right reservoir.” All fittings incorporate Banlaw’s trademark ball lock latching system achieving a reliable higher strength connection between nozzle & receiver.
Hydrocarbon Management Specialists
DIMENSIONS Fitting Type
A
B
ØC
D
E
F
G
ØH
J
BPLR1 BPLN1
91.5
64
46
*
*
63
41
24
20
BPLR2 BPLN2
93.5
65
48
*
*
66
46
25
21
BPLR3 BPLN3
97.0
68
50
*
*
67.5
46
28
21
BPLR4 BPLN4
110.5 76.5
55
*
*
75.5
50
31.5
21
BPLR5 BPLN5
115.5
58
*
*
79
53
33
22
BPLR6 BPLN6
124.0 89.5
62
*
*
79
56
37
22
80
THREAD CONFIGURATIONS - Receivers (Male) Nozzles (Female) Size 1 Couplings available with 1/2” & 3/4” on Receiver and 3/4” & 1” on Nozzle Sizes 2, 3, 4, & 5 Couplings available with 3/4” & 1” on Receiver and Nozzle Size 6 Couplings available with 1” & 1-1/4” on Receiver and Nozzle NPT THREADS SUPPLIED AS STANDARD, BSPT AVAILABLE ON REQUEST Size 1
Size 2
Size 3
Size 4
SWP
MPa psi
N 6.5 943
C 6 870
N 1O 1450
C 8.75 1269
N 6.75 979
C 8.75 1269
BP
MPa psi
26 3771
24 3481
40 5801
35 5076
27 3916
35 5076
N 6.5 943 26 3771
Size 5 C 7 1015
N 7 1015
28 28 4061 4061
Size 6 C 5 725 20 2901
N 5 725 20 2901
C 4.5 653 18 2611
LEGEND: SWP - Safe Working Pressure (Maximum Recommended Working Pressure) BP - Burst Pressure (Minimum Pressure at which Failure Will Occur) N - Nozzle C - Nozzle & Receiver Coupled FLUIDS: The Size 1 couplings are manufactured from Brass and are suitable for compatible coolants and water. The Size 2, 3, 4, 5, & 6 couplings are manufactured from zinc plated steel and anodised aluminium and are suitable for use with common lubricants and diesel fuel. Size 6 is also suitable with ULP. SEALS: All couplings are fitted with Viton and HNBR seal compounds. If in doubt, please verify seal compatibility with fluid prior to use. FURTHER INFORMATION: Further information on these couplings or any other Banlaw product is available from your nearest accredited Banlaw Distributor, or from Banlaw direct.
Call your Authorised Banlaw Pipeline Distributor:
Call for a full consultation Banlaw Pipeline Pty. Ltd. 17 Strathmore Road Caves Beach NSW 2281 Australia Telephone +61 (0)2 49724777 Fax. +61 (0)2 49714910 Website: www.banlaw.com Email:
[email protected] Please Note: Use only Banlaw factory replacement parts. Non-genuine parts may cause equipment failure or malfunction, ABN 88 062 044 071 and invalidate factory warranty. Banlaw Pipeline 2006 ©
Hydrocarbon Management Specialists