Banlaw Overview
TM TM FillSafe
Zero Overfill
Zero Tank Pressure
Zero Spillage
Banlaw FillSafeTM ensures:
Start / Stop Filling Operation Pushbuttons
System Healthy / Power On Indication
Filling Required Indication LED On Tank Requires Fuel LED Off Tank Full
Banlaw FillSafeTM removes the need for manual checking of fuel levels, and eliminates any guesswork on whether the tank is completely full.
Banlaw FillSafeTM is not flowrate dependant therefore, readily accommodates various flow rates and fluid types with no setup or change to the system, For example: diesel, oil or coolant.
Reduces the risk of fuel tank rupture
Safety Benefits
Financial Benefits with decrease in refuelling time and increased production time Environmental Benefits
Most mining equipment have fuel tanks that hold in excess of 4000 litres. With this in mind Banlaw FillSafeTM provides:
Remote configuration Both have Auto shutoff if full level not detected within preset refuelling time
Provides protection via any refuelling source, Fire feed protection if fire proof solenoid installed,
There are 2 modes of operation available: On-Board configuration
3. The control device or Electronic Ball Valve
2. The Banlaw Control Unit (ZP2)
1. The tank level switch (ZP3)
Banlaw FillSafeTM consists of 3 main components:
On-Board Configuration
Fluid Inlet i.e. Banlaw Fuel Receiver
Solenoid or Electronic Ball Valve
On/Off Control
On-Board Mode of Operation
Tank
Level Sensor ZP3
Fire Proof Electronic Ball Valve Installation
Normal Electronic Ball Valve
On-Board Configuration
3. The control device or Electronic Ball Valve
2. The Banlaw FillSafeTM ZP1
2. The Banlaw FillSafeTM ZP2 with UHF Radio Transmitter Unit
1. The tank level switch (ZP3)
Banlaw FillSafeTM consists of 4 main components:
Remote Configuration
Solenoid or Electronic Ball Valve
On/Off EBV Control
ZP1 Receiver
ZP2 UHF Transmitter
Fluid Inlet i.e. Banlaw Fuel Receiver
On/Off Control Signal
Remote Mode of Operation
Examples: Tank Farms, Service Truck
Tank
Level Sensor ZP3
ZP2 Controller
Fuel Receiver
FillSafeTM ZP2
Typical Installation
Haul Trucks
Excavators
Diesel powered freight & passenger locos
Zero Overfill
Zero Tank Pressure
Zero Spillage
Multi Application and Ease of Use
Failsafe Operation
In Conclusion Banlaw FillSafeTM Offers: