Zs022-stem (english-20090112) V0

Stem Service Instructions Service Instructions

Congratulations on your Full Speed Ahead poduct. Please read these instructions and follow them for correct use. Since specific tools and experience are necessary for proper installation, it is recommended that the stem be installed by a qualified bicycle technician. These instructions and instructions for other FSA products are available for download at http://www.fullspeedahead.com/techdoc Specification

Item Number / Model Name All Models FSA road, MTB and Gravity stems are compatible with industry standard steerer tube and handlebar diameters. To choose the correct FSA stem, first check the specific diameter of steerer tube and handlebar to be used. Components

Follow the assembly order in the illustration: ① Stem Body x1 ② Fixing Bolts x6

Revision Date 12-Jan-09

③ Stem Face Plate x1 Item Number Bolt for Bar Clamp Bolt for Steerer Clamp Torque for All Item Number kgf.cm N.m in.lbs kgf.cm N.m in.lbs All FSA / Vision Stem 60 6 53 60 6 53 ST-FR-200-OS 60 6 53 90 9 79 ST-FR-230-OS ST-DH-310-OS 90 9 79 90 9 79 ST-DH-310-OS 1.5" ST-DH-320-DC ST-FR-200-OS 1.5" 120 12 12 105 www.fullspeedahead.com ZS022-v0 Page 1105 of 2 120 ST-FR-230-OS 1.5"

Contact If you have questions, please visit our web site contact page at : http://www.fullspeedahead.com/contact

Warranty

Full Speed Ahead (FSA) warrants all FSA, Gravity, Vision and RPM products to be free from defects in materials or workmanship for a period of two years after original purchase unless otherwise stated in the full warranty policy. The warranty is non-transferable and valid to the original purchaser of the product only. Full warranty policy is available at www.fullspeedahead.com Stem installation

1. 2. 3.

Ensure that the steerer tube is clean and free of burrs or chips. With all headset components installed, ensure that the steerer tube is cut to the correct length and the proper amount of spacers are instaled to achieve desired stem height. Install the stem body ① onto the steerer tube. Tighten the stem steerer fixing bolts ② to recommended torque rating from table above. Note: Alternately tighten the steerer fixing bolts ② so both bolts reach recommended torque simultaneously. Ensure that bolt threads have a light layer of grease. Note: Stems ST-OS-99, ST-OS-115, ST-OS-120, ST-OS-150 and ST-RO-170 have an additional 1.8mm spacer (MW159) within the clamp area to prevent cracks from developing on carbon fork steerers. Spacers are unnecessary for other models.

4.

Insert handlebar between stem body ① and face plate ③. Tighten face plate fixing bolts ② to recommended torque rating from table above. Note: Gradually and evenly tighten the face plate fixing bolts ② in a diagonal pattern so all bolts reach recommended torque simultaneously. Ensure that bolt threads have a light layer of grease. Full Speed Ahead, USA 12810 NE 178th St. Suite 102 Woodinville, WA 98072 Tel: 1_425_488_8653 Fax: 1_425_489_1082

Revision Date 12-Jan-09

www.fullspeedahead.com

Full Speed Ahead, Europe Via Del Lavoro, 56 20040 Busnago, Milan, ltaly Tel: +39_039_688_5265 Fax: +39_039_682_3336

ZS022-v0

TH INDUSTRIES / FSA Asia 487 Ko-Chung Rd. Ta-Li City 412 Taichung County, Taiwan Tel: +886_4_2406_8641 Fax: +886_4_2406_8076

Page 2 of 2