Solar Systems Smart Display Sd3 Brochure
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Solar Systems Smart Display Sd3 Brochure as PDF for free.
More details
- Words: 334
- Pages: 1
VBus® accessories and software
▪ Simultaneous visualisation of collector and storage temperature as well as heat quantity ▪ One 6-digit and two 4-digit 7-segment LED displays ▪ Simple connection via RESOL VBus® ▪ Power supply via RESOL VBus® ▪ Outstanding design
Smart Display SD3
Technical data Dimensions: 150 x 165 x 24 mm Protection type: IP 30 (suitable for dry rooms) Ambient temperature: 0 ... 40 °C Data input: RESOL VBus®
The RESOL Smart Display is designed for simple connection to RESOL controllers with RESOL VBus®. It is used for visualising data issued by the controller: collector temperature, storage temperature and energy yield of the solar thermal system. The use of high-efficient LEDs and filter glass assures a high optical brilliance and good readability even in poor visibility conditions and from a larger distance. An additional power supply is not required. RESOL Smart Display SD3 Display module for the living area with 3 displays for collector and storage temperature as well as for heat quantity Price bracket A Article-no: 180 004 93
STA (Signal Translation Adapter) Technical data Housing: plastic, PC-ABS Protection type: IP 20, with insulation IP 22 (DIN 40050) Ambient temperature: 0 ... 40 °C Dimensions: Ø 130 mm, depth 45 mm Mounting: wall mounting Display: 5 LEDs Supply voltage: 220 ... 240 V~ Interface: RESOL VBus® The adapter is designed for the connection to the controllers DeltaSol® E, DeltaSol® ES and DeltaSol® M.
The adapter is used for controlling the pump via a PWM- or 0-10-V-signal.Via the VBus® the adapter receives information from the controller about the pump speed. The speed is converted into a PWM- or direct voltage signal and put out to the corresponding terminals. A signal corresponding to the speed is only available if the corresponding relay is designed for pump speed control. Otherwise, a signal depending on the position of the relay, for the on or off state is transmitted.
RESOL STA VBus® converter into PWM- or 0-10 V-signal Price bracket B Article-no: 180 004 30
39
▪ Simultaneous visualisation of collector and storage temperature as well as heat quantity ▪ One 6-digit and two 4-digit 7-segment LED displays ▪ Simple connection via RESOL VBus® ▪ Power supply via RESOL VBus® ▪ Outstanding design
Smart Display SD3
Technical data Dimensions: 150 x 165 x 24 mm Protection type: IP 30 (suitable for dry rooms) Ambient temperature: 0 ... 40 °C Data input: RESOL VBus®
The RESOL Smart Display is designed for simple connection to RESOL controllers with RESOL VBus®. It is used for visualising data issued by the controller: collector temperature, storage temperature and energy yield of the solar thermal system. The use of high-efficient LEDs and filter glass assures a high optical brilliance and good readability even in poor visibility conditions and from a larger distance. An additional power supply is not required. RESOL Smart Display SD3 Display module for the living area with 3 displays for collector and storage temperature as well as for heat quantity Price bracket A Article-no: 180 004 93
STA (Signal Translation Adapter) Technical data Housing: plastic, PC-ABS Protection type: IP 20, with insulation IP 22 (DIN 40050) Ambient temperature: 0 ... 40 °C Dimensions: Ø 130 mm, depth 45 mm Mounting: wall mounting Display: 5 LEDs Supply voltage: 220 ... 240 V~ Interface: RESOL VBus® The adapter is designed for the connection to the controllers DeltaSol® E, DeltaSol® ES and DeltaSol® M.
The adapter is used for controlling the pump via a PWM- or 0-10-V-signal.Via the VBus® the adapter receives information from the controller about the pump speed. The speed is converted into a PWM- or direct voltage signal and put out to the corresponding terminals. A signal corresponding to the speed is only available if the corresponding relay is designed for pump speed control. Otherwise, a signal depending on the position of the relay, for the on or off state is transmitted.
RESOL STA VBus® converter into PWM- or 0-10 V-signal Price bracket B Article-no: 180 004 30
39
Related Documents
Solar Systems Smart Display Sd3 Brochure
May 2020 0
Sd3
November 2019 0
Buderus Thermal Solar Systems Brochure
June 2020 7
Sd3
November 2019 0
Smart Systems
November 2019 9