Featured Products
Focus on Microcontrollers / Microprocessors
AVR XMEGA Atmel® introduces the XMEGA™ – a brand new AVR® microcontroller. With the same acclaimed characteristics as the established AVR devices, the XMEGA operates from just 1.6 volt with up to 32 MIPS at 32 MHz.
In This Issue:
April 2009
Microcontroller
AVR XMEGA 8/16-bit High Performance Low Power Flash Microcontrollers Atmel® introduces the XMEGA™ – a brand new AVR® microcontroller. With the same acclaimed characteristics as the established AVR devices, the XMEGA operates from just 1.6 volt with up to 32 MIPS at 32 MHz. Time critical real-time and interrupt driven applications become safer, more responsive, and predictable with XMEGA. AVR XMEGA features a CPU independent Event System, DMA controller, and Multilevel Interrupt Controller. With multiple time bases, extreme communication bandwidth and special features like Cryptography support, XMEGA is number one for demanding 8- and 16-bit embedded applications. At the same time XMEGA’s 2nd generation picoPower™ technology with only 100 nA sleep current is the best choice for battery operated and energy critical applications. AVR XMEGA microcontrollers are the perfect solution for a wide range of applications.
Features
Applications
Innovative Event System for fast, CPU independent inter-peripheral communication 4-channel DMA Controller boosts MCU performance 100% predictable timing High-speed 12-bit ADC (2Msps) and DAC (1Msps) Fast AES and DES crypto engine 2nd generation of picoPower technology
Industrial control Climate control Hand-held battery Factory automation ZigBee® Power tools Sensors Motor control
HVAC Wireless encryption Networking Metering Optical transceivers Medical applications Alarm systems White goods
Benefits Event System - Like a reflex in the human body, the innovative XMEGA Event System enables inter-peripheral communication without CPU or DMA usage. This ensures 100% predictable and short response time. Up to 8 simultaneous events or interrupt conditions in the peripherals can automatically start actions in other peripherals. Real 12-bit ADC and DAC - For high analog accuracy the XMEGA features high-speed 12-bit analog peripherals. Capable of up to 2 Msps, XMEGA’s ADCs deliver the fastest sample rate and most accurate result compared to conventional MCUs. Since XMEGA also features two 12bit digital-to-analog converters (DAC) with up to 1 Msps and four advanced analog comparators, XMEGA microcontrollers have leading analog integration. DMA Controller - A 4-channel DMA Controller enables fast, CPU independent data transfer that significantly boosts performance. The DMA Controller in XMEGA handles transfers between all combinations of data memories and peripherals. The AVR CPU register file and multiple bus layers ensures that the data bus is always accessible for the XMEGA DMA Controller. Programmable Multilevel Interrupt Controller - All peripherals have software selectable interrupt levels and different interrupt vectors. Important interrupts are executed immediately and tasks are prioritized with minimum latency. Second Generation picoPower - Atmel’s picoPower technology have proven to be the industry leader in low power designs. With the 2nd generation picoPower technology, XMEGA MCUs run a Real-Time Counter, Watchdog Timer and Brown-out Detector with only 2 ìA current consumption. The XMEGA also incorporates true 1.6 volt operation and elements like dynamic clock switching, and frequency scaling for optimal power management.
c du
t(
a)
o Pr ATxmega64A1
s) te ) l) l) By KB ) ( ne ne ( ) e B an ) an B h d K M h (b ( (C (K O M (C o co us sh A e n t y pt ot E P R R A at a S E I/O D M Ev St Fl Bo Cr I 64 4 2 4 4 8 Y 78
t bi
Ti
m
er
s (C
ha
nn
e
l)
16
bi
t
M C I PW RT SP 16 8 24 Y 4
SM
Bu
s) n ha
ne
l) a Ch
nn
el
)
. nt
RC
(c
)
e ag
s
(d
)
( (C ck /I p. it Pa /D 2-b om DT W re e 1 .C / D A -f -b AC na T W US 12 D A BO Pb 4 8 2x8 2x2 4 Y TQFP100, BGA100
I2 I(
C
an
d
RT
A it
ATxmega128A1
I
128
8
2
8
4
8
Y
78
8
24
Y
4
4
8
2x8 2x2
4
Y
TQFP100, BGA100
ATxmega192A1
F
192
8
2
4
4
8
Y
78
8
24
Y
4
4
8
2x8 2x2
4
Y
TQFP100, BGA100
ATxmega256A1
F
256
8
4
16
4
8
Y
78
8
24
Y
4
4
8
2x8 2x2
4
Y
TQFP100, BGA100
ATxmega384A1
F
384
8
4
32
4
8
Y
78
8
24
Y
4
4
8
2x8 2x2
4
Y
TQFP100, BGA100
ATxmega64A3
F
64
4
2
4
4
8
Y
50
7
22
Y
4
2
7
2x8 1x2
4
Y
TQFP64, QFN/MLF64
ATxmega128A3
F
128
8
2
8
4
8
Y
50
7
22
Y
4
2
7
2x8 1x2
4
Y
TQFP64, QFN/MLF64
ATxmega192A3
F
192
8
4
16
4
8
Y
50
7
22
Y
4
2
7
2x8 1x2
4
Y
TQFP64, QFN/MLF64
ATxmega256A3
F
256
8
4
16
4
8
Y
50
7
22
Y
4
2
7
2x8 1x2
4
Y
TQFP64, QFN/MLF64
ATxmega16A4
F
16
4
1
2
4
8
Y
36
5
16
Y
2
2
5
1x12 1x2
2
Y
TQFP44, QFN/MLF44
ATxmega32A4
F
32
4
2
4
4
8
Y
36
5
16
Y
2
2
5
1x12 1x2
2
Y
TQFP44, QFN/MLF44
ATxmega64A4
F
64
4
2
4
4
8
Y
36
5
16
Y
2
2
5
1x12 1x2
2
Y
TQFP44, QFN/MLF44
ATxmega128A4
F
128
8
2
8
4
8
Y
36
5
16
Y
2
2
5
1x12 1x2
2
Y
TQFP44, QFN/MLF44
2 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
User interfaces are the critical factor in making electronic products appealing to consumers. Atmel’s latest innovations in Touch Technology help you produce very desirable products that stand out from the crowd. In addition to its robustness and reliability in realworld environments, Atmel’s patented charge-transfer touch sense technology offers exceptional design flexibility that enables design engineers to develop lower cost products with outstanding consumer appeal.
Features
Benefits
Qtouch
Signal processing algorithms that eliminate false triggering due to momentary unintentional touch, proximity or electrical disturbances.
For 1 to 10 buttons Simple key shapes Easy to wire QMatrix Up to 64 keys Water resistant High temperature QSlide / QWheel
The ability to create keys of different shapes and sizes to suit the design of individual products and make them easier to use A choice of ‘touch’ or ‘proximity’ operation. Proximity operation enables devices to magically ‘wake-up when a hand approaches Inherent techniques that minimize power and energy consumption to extend battery life between re-charges in portable devices
3 channels
Automatic drift compensation to account for slow changes due to aging or fast changes due to the environment. No need for user re-calibration and no need to calibrate on the production line
Touch Library
Simple, elegant implementation that needs few other electronic components
Linear touch Rotary touch
Free software library Available as library files. Source code is not available
Adds touch capabilities to AVR devices Uses PORTB and PORTD for up to 8 touch channels Any combination of buttons, wheels and sliders possible
Adjacent Key Suppression (AKS™) that eliminates false triggering of nearby keys when touch keys are close together Low cost — often less than the cost of the mechanical devices that Atmel’s touch controllers replace
Precompiled linkable libraries for selected AVR devices
Applications
ATmega88, ATmega88PA, ATmega168P, ATmega328P, ATtiny88
Industrial Controls Handheld controls Medical Thermostat Control Panels White Goods ANY DEVICE that has a mechanical switch
More devices to be supported in near future First update scheduled for march 2009 Updates can be downloaded from Touch Library website
Microcontroller
Atmel Touch Technology – Ditch the Switch Get in touch with your senses
Limited Time Offer (while supplies last) We are pleased to offer a 50% discount on the Atmel Touch Technology products. There are many to choose from. Visit us at www.nuhorizons.com/touch to purchase yours online. Use discount code: ATMDTS409
3
The Kirkwood Series of embedded processors are based on the Marvell proprietary, ARMv5TE-compliant, high-speed Sheeva™ CPU core. Developed for network connected consumer electronic equipment, the Kirkwood processors provide performance, flexibility, interfaces, and price points that fit the needs of the digital economy. The innovative, on-chip crossbar architecture with any-to-any connectivity enables concurrent transactions among multiple units that results in high system throughput allowing system designers to create high-performance scalable systems. The tightly integrated CPU and memory controller significantly improves application performance.
Features
Applications
High-performance CPU with 600MHz, 800 MHz, 1.0 GHz, 1.2 GHz and 1.5 GHz operating speeds 16KB-Instruction and 16KB-Data 4-way, set-associative L1 cache 256KB unified 4-way, set-associative L2 cache 16-bit DDR2 memory interface (up to 800 MHz data rate) One or two Gigabit Ethernet MACs with interface options Supports IEEE 1588 Precise Timing Protocol and Audio Video Bridging Single PCI-Express port Single USB 2.0 port with integrated PHY Support for up to two SATA 2.0 ports with integrated PHYs Network security engine with support for encryption and authentication algorithms Support for Audio and MPEG Transport Stream Interfaces Support for SDIO, NAND flash, SPI, TWSI, and Two UART interfaces Support for up to two TDM Channels Low cost and full featured development tools available Linux 2.6.22.xx, VxWorks, FreeBSD support packages available Multiple compilers and dubuggers supported
Home Gateways / Access points Set-top boxes / IPTV / Media Server / AV Clients Network Attached Storage Ethernet Switch Control / VPN Routers Security Appliances Wireless Energy Meter Readers / Industrial Control Plug computers
P/N
Freq.
L1 Cache
L2 Cache
Memory Controller
Flash
GE
PCIe
USB2.0 w/PHY
SATA2.0 w/PHY
UART
AV Interfaces
Package Size
Process
88F6281
1.0 GHz 1.2 GHz 1.5 GHz
16 kB-I 16 kB-D
256 kBunified
16-bit DDR2-800
NAND/ SPI/SDIO
2
One PCIe (x1)
1
2
2
I2S/SP DIF MPEG-TS
19x19 mm 288HSBGA 1.0 mm Pitch
65 nm
88F6192
800 MHz
16 kB-I 16 kB-D
256 kBunified
16-bit DDR2-400
NAND/ SPI/SDIO
2
One PCIe (x1)
1
2
2
I2S/SP DIF MPEG-TS
24x24 mm 216-LQFP 0.4 mm Pitch
65 nm
88F6190
600 MHz
16 kB-I 16 kB-D
256 kBunified
16-bit DDR2-400
NAND/ SPI/SDIO
1
One PCIe (x1)
1
1
2
I2S/SP DIF MPEG-TS
24x24 mm 216-LQFP 0.4 mm Pitch
65 nm
88F6180
600 MHz 800 MHz
16 kB-I 16 kB-D
256 kBunified
16-bit DDR2-400
SPI/SDIO
1
One PCIe (x1)
1
NA
2
I2S/SP DIF
13x13 mm 225-LFBGA 0.8 mm Pitch
65 nm
GbE
PHY
Network
16-bit DDR2
Printer
Sheeva™ CPU Core Single Issue 16KB-I, 16KB-D 800MHz
USB
TWSI
On-Board Memory
Serial Devs/SPD
256KB L2
PCIe 802.11n wireless
NAND High-speed CPU for Digital Home Platforms
SDIO
E-SATA
I2S/SPDIF
SATA
88F6192
2GB
Port Multiplier
Marvell 88F6192— Typical System Implementation Ethernet
4
SPI
NAND FLASH
SPI
Software
Common SDK (Linux, VxWorks, NetBSD, Uboot)
Microproces s or
88F6xxx SoCs with Sheeva Technology Marvell Kirkwood Series of Embedded Processors
Marvell Discovery Innovation Series of Embedded Processors Discovery Innovation Series products are based on the Marvell proprietary, ARMv5TE-compliant, high-performance Sheeva™ CPU core. They are perfect for applications that require enterprise class performance at low power. The innovative, on-chip crossbar architecture with any-to-any connectivity enables concurrent transactions among multiple units that results in high system throughput allowing system designers to create high-performance scalable systems. The tightly integrated CPU and memory controller significantly improves application performance.
Features
Applications
High-performance dual-issue CPU with Vector Floating Point (VFP) support 600 MHz, 800 MHz, 1 GHz and 1.2 GHz operating speeds 32KB-Instruction and 32KB-Data 4-way, set-associative L1 cache per core 512KB unified 8-way, set-associative L2 cache per core 40/72-bit high bandwidth DDR2 memory interface (up to 800 MHz data rate) with ECC Two or four Gigabit Ethernet MACs with interface options Two PCI-Express ports each configurable as single x4 or quad x1 Three USB 2.0 ports with integrated PHYs One or two SATA 2.0 ports with integrated PHYs Network security engine with support for encryption and authentication algorithms Common SDK (Linux, VxWorks, NetBSD, Uboot)
Control Plan Applications for Ethernet Switches / Routers SMB Gateways / Base Stations Enterprise / Professional Storage Single Board Computers Enterprise Printers DVRs, NVRs Video Surveillance Gaming Platforms
P/N
CPU
Freq.
L1 Cache
L2 Cache
Memory Controller
GE
PCIe
USB2.0 w/PHY
SATA2.0 w/PHY
UART
Device Bus
Package Size
Process
MV78200
ARMv5TE 2x Core Dual Issue w/FPU
800 MHz 1.2 GHz
32 kB-I 32 kB-D
512 kBunified
32/64-bit DDR2-800 w/ECC
4
Two PCIe (One x4 or Four x1)
3
2
4
32 bit
27x27 mm 655-FCBGA 1.0 mm Pitch
65 nm
MV78100
ARMv5TE 2x Core Dual Issue w/FPU
800 MHz 1.2 GHz
32 kB-I 32 kB-D
512 kBunified
32/64-bit DDR2-800 w/ECC
2
Two PCIe (One x4 or Four x1)
3
2
4
32 bit
27x27 mm 655-FCBGA 1.0 mm Pitch
65 nm
MV76100
ARMv5TE 2x Core Dual Issue w/FPU
600 MHz 800 MHz
32 kB-I 32 kB-D
512 kBunified
32/64-bit DDR2-800 w/ECC
2
Two PCIe (One x4 or Four x1 + One x1)
3
1
4
32 bit
27x27 mm 655-FCBGA 1.0 mm Pitch
65 nm
GbE
Network
PC
GbE
PHY
32/64-bit DDR2 w/ECC
PHY
Sheeva™ CPU Core Dual Issue w/FPU 32KB-I, 32KB-D 800MHz–1GHz
Sheeva™ CPU Core Dual Issue w/FPU 32KB-I, 32KB-D 800MHz–1GHz
512KB L2
512KB L2 8/16/32 bits local bus
USB 2.0 USB 2.0
USB Flash Drive
TWSI
MV78200
Software Common SDK (Linux, VxWorks, NetBSD, Uboot)
Microprocessor
MV7xxxx SoCs with Sheeva Technology
DDR2 SO-DIMM or On-Board Memory Serial Devs/ RTC/SPD NOR Flash
NAND Flash
USB 2.0
SPI
SPI Flash
Graphics
Marvell MV78200 — Typical System Implementation
PCI-e x4
PCI-e x4
SATA 2.0
SATA 2.0
802.11 n wireless
ASIC/ IO
5 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Microcontroller
Renesas Motor Control Solutions
Fully functional hardware and software solutions ranging from Brushed DC to AC Induction and BLDC motors to jump-start system designs The 16-bit CISC MCUs of the R8C Family feature high code efficiency, superb noise performance, low power consumption, and high processing performance for real-time applications. With the advantage of abundant on-chip peripherals such as comprehensive timer functions and various serial communication functions, the R8C Family supports a wide range of application fields. Products with builtin modules such as high-speed on-chip oscillator, power-on reset, low-voltage detection circuit and oscillator stop detector reduce the external component count and facilitate the development of low-cost and safe systems. For shorter development times and reductions in total system costs, Renesas offers low-cost development tools as well as an expanding lineup of products with on-chip flash only.
Features
Benefits
Renesas Motor Control Algorithm Solutions: 180-degree Sinusoidal BLDC Motor Control (Hall Sensors) 120-degree Trapezoidal BLDC Motor Control (Sensorless BEMF) 120-degree Trapezoidal BLDC Motor Control (Hall Sensors) V/F Scalar AC Induction Motor Universal / DC Motor Control (TRIAC / PWM Chopper)
Variety of devices for a wide range of motor control applications Get started with any device in the R8C family with applicable timer functions using the portable control algorithms by Renesas Reduce maintenance and learning curve with completely free, easy-to-use motor control algorithms in source format Support for variety of motors including AC Induction, Brushed DC, Brushless DC and Universal motors Complete, ready-to-use BLDC Motor Control kit for quick evaluation and experiments
Renesas R8C MCU Features: 16-bit CISC architecture
2 register banks for fast interrupt handling
16-bit Hardware multiplier
Data Flash for configuration data storage Two stack pointers
User & Interrupt
Flexible clocking scheme
On-chip 125kHz & 40MHz OSC with PLL
Fast ADC – Up to 2.2 uS conversion time Up to 6 timers
6 channel Complementary PWM with dead-time
Flexible Sensor Interface – Hall, Tachometer
Applications Vacuum cleaners Fans Power Tools Cooling Fans Compressors Pumps Any product that requires electronic commutation of BLDC, ACIM and Permanent Magnet motor
R8C CPU Program Flash Data Flash
40MHz OCO 125kHz OCO WDT LVD
RAM
POR
Debug Unit
LIN
1-wire I/F Network
6 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
ADC CLK
Trig
16-bit Motor Timer (RD) Shut-off
Motor Current U U V V W W
Power Module M BLDC
over-current
CLK 16-bit Timer (RC)
Comp.
C o-P roces s or
LynxExp & VoyagerGX 2D Graphics Co-processor Enable low power, high quality and sophisticated applications The LynxExp and VoyagerGX graphics co-processors are designed with low power, high performance and reliability in mind to enable SM502 Block Diagram the rich multimedia features for the vertical and consumer applications. They are ideal graphics co-processor in applications where the resolution needs to be higher than 640x480. The 128-bit 2D drawing engine includes a front-end color space conversation with 4:1 and 1:8 scaling support. The video engine supports two different video outputs at 8-bit, 16-bit or 32-bit per pixel and a 3-color hardware cursor per video output. The LCD panel TV Tuner/ VCR/DVE Player NTSC/PAL Camera video pipe supports a back-end YUV color space conversion with 4:1 and 1:2 scaling. A Zoom Video port is also to interface to MP2/4included decoder external circuitry for MPEG decode or TV input. The complete software debug and SDK tools simplify the driver development of utilizing USB Host 1.1 UART the 7 graphics display layers and multiple display function for high quality and sophisticate applications. Dual 8-bit AC97, I2S, PWM uC & I/O
Single 16-bit Video Port
SSP, GPIO
The LynxExp supports the standard PCIe Gen.1 bus interface in a 17mmx17mm BGA package while Inputthe VoyagerGX supports the 32bit local bus and PCI bus interfaces in a 19mmx19mm BGA package. The flexible bus interfaces allows supporting a wide range of 32-bit CPU CPU 2D Host Bus / PCI SH, Hostand Bus PowerPC. embedded CPUs, which includes x86, Xscale, ARM7/9/11, MIPS-licensePlatform CPUs,32-bit Renesas Graphics/ Video or R.G.B PCI 33/66
Engine
Features
Internal Benefits Memory
SM502 32-bit local bus / PCI bus 2D GPU for embedded or x86 CPU Internal 8MB SDRAM or external 32-bit high bandwidth SDRAM memory configuration Up to 1280x1024 (4:3) or 1440x960 (16:9) resolution I/O peripherals: USB host, AC97/I2S, I2C, SSP, PWM, 2x8-bit/1x16-bit Zoom Video, and GPIO. 7 display layers: primary graphics, video overlay, video alpha, graphics alpha, primary hardware cursor, secondary graphics and secondary hardware cursor Complete software set for Linux, CE, Windows, etc.
SM750 PCIe x1 bus 2D GPU for embedded or x86 CPU Internal 16MB DDRI or external 64-bit high bandwidth DDRI memory configuration Up to 1920x1440 (4:3) or 1920x1080 (16:9) resolution I/O peripherals: 2x8-bit/1x16-bit Zoom Video, I2C PWM, SSP and GPIO. 2 internal 300Mhz DAC 2 18-bit TFT interfaces 7 display layers: primary graphics, video overlay, video alpha, graphics alpha, primary hardware cursor, secondary graphics and secondary hardware cursor Complete software set for Linux, CE, Windows, etc. SM750
Applications
Display Engine
Panel Interface
Memory Controller
Lowest cost 2D GPU solution External Memory Interface Lowest power GPU, no2x16 heat / 1x32sink or fan required Rich display feature for sophisticate applications Complete and easySDRAM to use SDK for customize driver development Committed to product longevity Available in industrial temperature grade
High resolution handhelds Point-of-Sales terminals Medical device Multi-functional printer Casino gaming IPC Server Block Diagram Thin Client
SM502 Block Diagram VCR/DVE Player Serial ROM VCR/DVE Player
TV Tuner/ MP2/4 decoder
NTSC/PAL Camera
Dual 8-bit Single 16-bit Video Port Input CPU Platform
32-bit Host Bus / PCI
32-bit CPU Host Bus or PCI 33/66 Internal Memory
Optional USB Host 1.1 UART AC97, I2S, PWM SSP, GPIO
uC & I/O
2D Graphics/ Video Engine Memory Controller
R.G.B
VGA Code
CPU Platform
PICe X 1
7
SDRAM
PCI-E Controller
Display Engine
TV Tuner/ MP2/4 decoder R.G.B.-1
Dual 8-bit Single 16-bit Video Port Input 2D Graphics/ Video Engine
R.G.B.-2
Display Engine
TMDS Transmitter Optional Option
TTL 18bit x2
Panel Interface
Internal Memory
External Memory Interface 2x16 / 1x32
SM502 Block Diagram
NTSC/PAL Camera
Memory Controller
Optional O ti
4x16/2x32 Memory I/F Optional
SM750 Block Diagram
LVDS Transmitter
DDR
New family brings 8-bit microcontrollers into 21st century with leading edge combination of performance, robustness, peripherals and cost effectiveness Features
Benefits
Advanced 20MIP STM8 8-bit core with Harvard Architecture and 3-stage Pipeline 4 - 128 Kbytes Flash Memory , up to 6Kbytes SRAM Robust Architecture (dual watchdogs, clock security, IEC61967-compliant EMI emission, IEC-1000 high immunity to susceptibility and high current-injection immunity) Rich peripheral set (10-bit ADC, advanced timers, CAN, U(S)ARTS, SPI, I2C) Maximum Integration (true EEPROM, 16MHz and 128kHz on-chip RC oscillators) 130nm embedded non-volatile memory process 2.95V - 5.5V Operation -40°C to +85°C and -40°C to +125°C temperature ranges 20 - 80 pin packages Touch Sensing Firmware Single-wire debug-and-programming interface Range of low cost easy to use starter kits and development tools
Excellent performance and code density Scalability in memory Meets demanding requirements of industrial and appliance applications Good for accurate control, monitoring and communication Reduces system cost and need for external components Suitable for high performance and cost sensitive general purpose 8-bit MCU applications Helps transition legacy 8-bit systems to lower supply voltages Suitable for industrial and appliance applications Broad portfolio with small form factor packages for space constrained applications and larger pin count packages for applications needing more I/O Easy to combine touch sensing functions, such as touch keys, wheels or sliders Non-intrusive real-time debugging and in-system programming Speeds development process and time to market.
Microcontroller
STM8S 8-bit Flash Microcontroller Family
Applications Home appliances HVAC systems Industrial Automation Power Tools Personal-care Equipment Power Control and Management Motor Control Circuit Breaker Lighting and User Interfaces
8 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Microcontroller
STM32 32-bit Flash MCU Family Up to 512 Kbytes of Flash, extra SRAM and added peripherals enhance lowest-power ARM Cortex-M3 based family
Features
Benefits
1.25 DMIPS/MHz Cortex-M3 Core
Up to 35 percent performance improvement and up to 45 percent better code density compared to an ARM7TDMI
Single cycle multiply and hardware division Tightly coupled nested vectored interrupt controller
16 - 512 Kbytes high performance Flash, 4 - 64 Kbytes SRAM Low power
Run mode as low as 27 mA at 72 MHz (executing from Flash) Down to 2 uA in standby mode Low voltage 2.0V-3.6V operation
First class peripherals 1 uS triple12-bit A/D converter, 2-ch 12 DAC, 4 Mb/s UART, 18 Mb/s SPI, USB full-speed device, Flexible Static Memory Controller, I2S, SDIO, 18 MHz I/O toggling
Maximum integration
Reset circuitry, LVD, voltage regulator, accurate RC
Simple architecture and easy-to-use tools
Applications Industrial PLC Inverters Printers, scanners Industrial networking Solar inverters Digital SMPS Building and security Alarm systems Video intercom HVA Low power Glucose meters Power meters Battery operated applications Appliances 3-phase motor drive Application control User interface PC peripherals Medical
9
32-bit performance with 16-bit code density Excellent real-time performance and fast interrupt response
60 fully compatible devices Outstanding power efficiency for low power and portable applications Broad connectivity while minimizing overall component count Only seven external components required for a base system Easy development and fast time to market
Soft Processor
The Industry’s Most Flexible Embedded Processing Solution Xilinx unleashes the potential of embedded FPGA designs with the award winning MicroBlaze™ soft processor solution. The MicroBlaze core is a 32-bit RISC Harvard architecture soft processor core with 32 general purpose registers, ALU, and a rich instruction set optimized for embedded applications. It supports both on-chip block RAM and/or external memory. With the MicroBlaze soft processor solution, you have complete flexibility to select any combination of peripherals, memory and interface features that you need to give you the best system performance at the lowest cost on a single FPGA. For development, Xilinx offers the Embedded Development Kit (EDK), which
Microprocessor
Xilinx 32-bit
is the common design environment for both MicroBlaze and PowerPC-based embedded systems. The EDK is a set of microprocessor design tools and common software platforms, such as device drivers and protocol stacks. The EDK includes the Platform Studio tool suite, the MicroBlaze core, and a library of peripheral IP cores.
MicroBlaze Hardware Options and Configurable Blocks Hardware Functions Hardware Barrel Shifter Hardware Divider Machine Status Set and Clear Instructions Hardware Exception Support Processor Version Register Floating-Point Unit (FPU) MMU/MPU Hardware Multiplier Hardware Debug Logic Cache Options Configurable size 2 KB - 64 KB Configurable micro-cache size 64B –1024B 4 or 8 word cache lines Bus Infrastructure PLB v4.6 for main processor interface Local Memory Bus (LMB) for fast local access memory Fast Simplex Link (FSL) for interfacing to co-processors
Device Family
Max Clock Frequency
Max Dhrystone 2.1 Performance
Virtex-5
235 MHz
280 DMIPS
Spartan 3A-DSP
105 MHz
125 DMIPS
Note: Processor performance and size will vary with configuration options.
10 For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal
Development Tools
IAR Embedded Workbench
IAR Embedded Workbench is a set of development tools for building and debugging embedded applications using assembler, C and C++. IAR Embedded Workbench incorporates the IAR C/C++ Compiler, assembler, linker, librarian, text editor, project manager and C-SPY® Debugger into one integrated development environment (IDE). In a continuous workflow, you can create source files and projects, build applications and debug them in a simulator or on hardware. IAR Embedded Workbench offers the same intuitive user interface regardless of which microcontroller you have chosen to work with—coupled with general and targetspecific support for each device. Every IAR C/C++ Compiler contains both generic global optimizations as well as low-level chip-specific optimizations that ensure a small code size while taking advantage of all the specific features of your selected device. Reuse of code and migration to new microcontroller architectures is made easy as each IAR C/C++ Compiler uses the same naming convention. Whether you have a tight project schedule or are just eager to get started, IAR Embedded Workbench contains configuration files, code examples and template projects to get you going fast.
Key Features: Fully integrated development environment for building and debugging embedded applications Automatic checking of MISRA C rules for security-critical applications State-of-the-art C-SPY Debugger Extensive support for various hardware debug systems and real-time operating systems (RTOS) with built-in or 3rd party plug-ins Flying start with ready-made device configuration files, code and project examples Same use interface for all supported MCU architectures Tight integration with other products from IAR Systems
Benefits High performance and easy-to-use – More efficient development Embedded focus and chip specific support - Smooth and fast development without having to be an hardware expert Most compact and reliable code – Lower cost on device memory, more space for further product enhancement and higher product quality Wide 3rd party support - Flexibility in choosing hardware debuggers and real-time operating systems which best suit your application High code portability cross different MCUs – Lower cost in product development and maintenance Excellent technical support – Faster development and shorter time to market Flexible license models for enterprise, education and small business – Full budget control
11
Supported Device
Part Number
8051 (All Suppliers) ARM (All Suppliers) Atmel AVR Atmel AVR32 Renesas H8 Renesas M16C / R8C Renesas M32C
EW8051 EWARM EWARM-BL EWAVR EWAVR-BL EWAVR32 EWAVR32-BL EWH8 EWM16C EWM32C
Nu Horizons offers a wide range of development/evaluation boards, tools and kts. For more information, please visit www.nuhorizons.com/development
Development Tools
R8C/25 BLDC Motor Control Development System The Renesas BLDC (Brushless DC) Motor Control evaluation kit is a ready-touse BLDC Motor Control solution with industry-quality hardware and software for quick deployment in cost-sensitive applications. The Kit offers developers a vehicle to evaluate and adopt a low cost BLDC Motor Control solution into their products using Renesas’ R8C family of microcontrollers.
Includes:
BLDC Motor Control Board 24VDC BLDC Motor DC Power supply: 24V, 5A E8a on-chip debugger/emulator with USB cable HEW IDE with evaluation C compiler Sample code, schematics, Bill of Materials BLDC Motor Control Algorithms Source Code BLDC Motor Control Application Notes Quick-Start Guide
Ordering Info: YMCRPR8C25
Price: $921.99
Nu Horizons Virtex™-5 LXT Evaluation Platform The Virtex-5 LXT Platform FPGA is optimized for high-performance logic with low-power serial connectivity. This kit includes one of SPF and 8 SMA connectors for easy evaluation of MGT designs.
Key Features:
10/100/1G Marvell Ethernet Phy LTC1326 – Linear Technology micropower precision triple supply monitor LTC3026 – Linear Technology 1.5A low input voltage VLDO linear regulator LTC3412 – Linear Technology 3A, 4MHz, monolithic synchronous step-down regulator LTC3418 – Linear Technology 8A, 4MHz, monolithic synchronous step-down regulator LTM4601 – Linear Technology 12A DC/DC µModule power supply 2x16 Tianma display ISSI DDR2 SDRAM 1 SFP connector 8 SMA connectors
Includes: Development board Power supply Reference design
Featured Suppliers: 2x16 Character Display
8 LEDs
Linear Tech Acquisition Header
Video DAC Marvell Ethernet Phy
Pushbuttons
Xilinx Virtex LXT50
64 MB DDR
Headers
JTAG Header
16 MB Flash
Platform Flash
Ordering Info: NH-5VLXT-EVL
Price:
RS-232
Crystal
8 SMAs
1 SFP
$799 Nu Horizons offers a wide range of development/evaluation boards, tools and kts. For more information, please visit www.nuhorizons.com/development
12
Nu Horizons Line Card
• Discretes (Switching Diodes)
• Audio (DAC’s, ADC’s, Codec’s, SPDIF, Sample Rate
• • • •
Conv., DSP, USB) Memory (EEPROM, DAC + EEPROM) Networking (T1/E1/T3/E3 xcvr, PCM) Sensors (Hall Effect Sensor, 3d Compass) Video (NTSC/PAL Encoder/Decoder, A/V Switches, Video Gain Amp)
• • • • •
Discrete (Transistors, FET arrays, Thyristors, Triacs) Display (Vacuum – Fluorescent Display Drivers) LED Drivers (Constant Current Drivers) Motor Control (Brushless DC, Bi-Polar Stepper) Power (Linear Regulators, Buck/Boost/Fly back DC- DC, Charge Pumps)
• Device Server Modules • Embedded MCU / MPU (ARM7TDMI, ARM9926EJ) • Networking Modules (Wired/Wireless 802.3 /
802.11bg / 802.15.4
• •
•
•
• •
GPS, RF, WiMax, Zigbee) Memory (Flash, EEPROM, Modules) Microcontrollers (8051, AVR, ARM7TDMI, ARM926EJ) Multimedia & Imaging (CCD/CMOS Arrays, IR, Video) Network Storage (Data Storage, Switched Ethernet) Programmable Logic (FPGA, SPLD/CPLD) Sensors (Biometrics, RF, Smart Cards)
• •
(Formerly Astec / Artesyn)
AC-DC Switchers - Low Power (LP, NT, DA, DP, SSL) 25W-350W - Medium Power (MP) Up to 1200W - High Power (VS) Up to 2500W - Intelligent High Power (iVS) Up to 4860W DC-DC Modules (1/16 Brick, 1/8 Brick, ¼ Brick, ½
Brick, RF Power Brick)
• Industry Standard - Non Isolated Point-of-Load (C-Class, E-Class, F-Class) • Power Systems Engineering Services
• Data Converters (ADC, DAC) • Interface (PLB/PCI/I2C/SPI UART’s,
RS232/485/422 Transceivers.) • Power (Buck/Boost Regulator’s, Charge Pumps, LDO’s, DC/DC modules, Supervisors, PWM) • Storage (SAS/SATA Multipliers and Selectors) • Telecom (T1/E1/DS1/DS3/E3 LIU’s, SONET/SDH Framers, Mappers & Aggregators)
(Fiber Optics Division) • Optical Components (WDM Management, 850nm
• Fiber Optic Devices (10G FP TOSA & MM PIN
ROSA, OTDR FP Lasers, 2.5G DWDM DML, DFB TOSA & APD ROSA) • Optocouplers (Transistor Output, High Speed, Solid State Relays) • RF Modules (Zigbee) • RF Semiconductors (RFIC Switch, GaAs FET, GaAs PA, Si LD-MOSFET, CATV Hybrid, Si RFIC)
VCSELs & Detectors, 1310nm Lasers & Detectors, CML Transmitters) • Optical Transceivers (GBIC, XFP, MSA300, SFP, SFP+) • Passive Optics (WDM networks)
Gates / 50 – 300 MHz)
DDR2, 10/100 MAC, Mil-STD-1553, UART, DMA, Timer, GPIO) • Standard Cell ( 0.13µ - 0.25µ / 5M – 12M Gates / 150 – 333 MHz) • Structured ASIC ( 0.13µ - 0.35µ / 21K – 1.7M Gates / 50 – 250 MHz)
MOSFET gate drivers)
• Sensor and Imaging Arrays (Hall Effect Sensors) • Signal Conditioning (Solid State Relays,
Optocouplers)
DTMF)
• Telecom (Embedded Modem, MF Trunk signaling,
• Audio (Speakers-on-a-Chip, PC HD-Audio, PC HD-
Audio Modem Combo)
Demodulators, Surveillance / Security)
System Solutions, Digital Photo Frames)
• Dial-Up Access Modems (PC Dial-Up Modems,
13
Embedded Dial-Up Modems) • Broadband (ADSL Solutions, VDSL Solutions, SHDSL Solutions, Embedded Communications Software) • Passive Optical Networks (GPON, BPON)
Regulators, DC/DC µModules, LED Drivers, Hot Swap, PoE) • Signal Conditioning (Amplifiers, Comparators, Filters, Voltage References, Thermal Couple Compensators) • Wireless / RF (I/Q Modulators – Demodulators, Up & Down Converting Mixers, IF Amplifiers, PA, RF Log Detectors, RF Power Detector)
• Data Communications (10/100/1G/10G Ethernet
Switches, 10/100/1000/10G PHYs)
StrongARM, PPC & MIPS Systems Controller)
Storage Processors)
• Embedded MCU / MPU (ARM V5TE, PXA
• Power Management (POLA) • Storage (FAS/SATA/PATA, SAS/Fiberchannel, • Video (Format Converter) • Wireless / RF (802.11 Modules)
• Analog ( Drivers / Voltage & uC Supervisors /
Filters / Switches / Regulators)
Op Amps / References / Timers)
Swap, PCI/PCIX/PCIE, High Side, LDOs, DDR)
• Bus Device ICs ( USB / PC / PCMCIA / SMBus) • Ethernet ( 10/100 PHYs, Controllers, Switches) • Linear ICs ( Active Filters / Comparators /
• Precision Edge ICs ( Clock distribution, generation, synthesizers / Multiplexers, PLLs, buffers, CDRs)
data rate)
• Telecom (SERDES, CDR, Laser Drivers, TIA’s,
Supervisor I2C)
CPU)
Limiting Amps) • Video (HDMI, Equalizers, Cable Drivers, Reclockers, Optical Modules (SFP))
• RF (290 – 980 ISM band / ASK/FSK / 200kbps max • System Management ICs ( Fan Control / Thermal
• DRAM (DDR3 SDRAM, DDR2 SDRAM, DDR
SDRAM, SDRAM, RLDRAM, PSRAM)
UDIMM)
Combinations)
Speed NAND, Solid State Storage, Embedded USB)
• DRAM Modules (FBDIMM, RDIMM, SODIMM, • Memory (QDR/DDR SRAM, Zero-Wait SRAM
(NBT), Sync Burst SRAM, Specialty Sync-SRAM)
(Including ICS)
• Audio (2,4,8, & 10 Channel Codecs) • Clock Distribution (Synthesizers, Translators,
Oscillators, PLLs, Spread Spectrum, Video)
• Clock Generation (Fan-Out, Multiplexers, PLLs,
Translators, Programmable) Datacom (10/100BaseT Phys) Interface (PCIE Switches, Rapid I/O) Logic (FST, ALVC, LVC, FCT & BusSwitch) Memory (FIFO, SRAM, Multiport RAM) Telecom (Network Search Engines, T1/E1/J1 LIUs, Framers, ATMs, AFEs, TSIs) • Video (LVDS TX/RX, HDMI Multiplexer/Switches)
• • • • •
• Video (MPEG Encoders/Codecs, Video Decoders, • Imaging Solutions (Fax Modems, Fax and MFP
®
• Power and Battery Management (IGBT and
Current DAC)
• Frequency Control (Silicon Timing) • Interface (RS-232, 422/485, CAN PHY) • Power Management (Switching Regulators, Linear
• IP Repository ( ARM926EJ, 8051, USB, PCIE,
• Audio (Mux/Demux, Codec) • Image Processor (Scaler, Deinterlacer, Motion Co-
• Data Converters (Delta Sigma, SAR, Voltage DAC,
• Power Management ICs ( Battery, Display, Hot-
• Embedded Array ( 0.13µ - 0.5µ / 6K – 10.7M
PWM Control, LED/Lamp/Display Drivers) • RF Power (FETs, Drivers, Amplifiers, Microwave modules, RF Modules) • Solar Devices (Solar Cells, Solar Bits, Solar Die, Solar Battery Chargers)
• Sensors (Hall Effect)
• Analog (Data Conversion, Power Management) • Communications (Bluetooth, LIN, CAN, POTS,
• Power (MOSFET, IGBT, Diodes, Thyristors, DC/DC,
• Mobil DRAM (Mobil SDRAM, Mobil DDR SDRAM) • Multichip Packages (MobilDRAM & NAND Flash • NAND Flash Memory (Managed NAND, High (Formerly C&D Technologies)
• AC/DC Power Supplies (200 – 2000 Watts,
2.5VDC to 48 VDC Out – PCI Modules)
• Data Acquisition (Electronic Imaging, A/D
Converters, D/A Converters, Sample/Hold Amplifier, Multiplexers) • DC/DC Converters (0.25 to 340 Watts, 0.02 to 80 Amps, 1.2 to 48 VDC Out; 3 to 75 VDC In) • Digital Panel Meters (Voltmeters, Wire Meters, Process Monitors, AC/DC Ammeters) • Magnetics (Inductors & Transformers, Differential common-mode filters, Databus Isolators)
• Memory (DDR DRAM,SDRAM, EDO & FPO DRAM,
E2PROM, PSRAM, SRAM, DDR II Synchronous SRAM, Asynchronous SRAM) • Smart Card (Two-Wire Serial EEPROM, Secure, MCU Based, ICs)
• AC-DC Power Supplies (125 – 275 Watts, 12VDC
to 56 VDC Out, 90-264VAC In, 3” x 5” format)
• Power Systems Engineering Services
MCU based RF, Audio streaming)
• Communications (Voice & Audio CODECs, Pro-X
•
• •
•
SLICs, USB Audio Codec) Logic ICs (I/O Controllers, ISA Bridge, Power Management, Hardware Monitors, Clock Generators, Power I/C, Card Reader IC’s, IEEE1394) MPU (8-bit 80C51 based, 32-bit ARM7TDMI) Power (ACPI Controller, PWM, DDR Bus Term, Power Switch) Voice Solutions (Record & Playback ICs)
• Frequency Control (Oscillators, Crystals, VCXO,
Processor, CMOS Arrays)
ARM926E, Cortex M3)
TCXO, OCXO, Sine Wave Oscillator)
Triacs, Transistors)
• Embedded MCU / MPU (16/32 Bit MCUs) • Logic (Standard – High/Low Voltage, Interface,
Multi-Purpose) • Memory (Fast Flash, Low Power SRAM, EEPROM)
• Frequency Control (Oscillators, Optical Timing
ARM7TDMI / ARM946E – Full Development Tool Suites) • Memory (P2ROM, DRAM ) • MEMS (3D Accelerometers -3g to +3g) • Power Management (Linear (LDO) & Switching Voltage Regulators, Power Switch (USB) devices) • Speech (BGM Mixer - ADPCM & ADPCM2, Voice Synthesizers & Recorders, Audio Codec) • Telecom (ADPCM – Linear – PCMA-Law - VoIP Codec’s, Echo Cancellers, Transceivers) • Video (NTSC / PAL / SECAM Encoders – Decoders, NR-FIFO)
Clocks, Sine Wave Oscillator)
LDO, High Voltage Interface / Driver’s, PoE)
Filters, RFIC Transceivers)
ISM, Bluetooth, 802.11b)
802.11b, and Bluetooth)
• AC/DC Power Supplies (Industrial and Medical - 300W - 1500W) • DC/DC Converters
- Industry Standard (1/8-Brick, 1/4-Brick, 1/2-
• RF Modules (ZigBee, 802.15.4, UHF Mesh, FHSS
- Non-Isolated Point of Load - Intermediate Bus Converters (1/8-Brick, 1/4-
• Standalone RF modules (FHSS, 802.15.4,
Brick, Full Brick)
Brick, 1/2-Brick)
• Audio / Video (3 Input A/V Switch, Dual SCART • Flat Panel Displays (LCD – 2” to 65”) • Memory (Flash – NOR) • Optoelectronics (LEDs, Laser Diode, Photo
coupler, IrDA, photo interrupters, Emitters/Detectors, Sensors) • Power (LDO / Switching Regulators, LED Drivers, Solid State Relays)
A/V Switch)
Poly Phase Meter ICs)
Power Management, Interface ICs)
STM-1 / STS-3 / E4 & DS3 / E3 / STS-1 Transceivers)
• Modems (V22bis, Data Pumps, AFEs, DAAs) • Power Measurement Metering Control (Single/ • Smart Card Reader (SoC - Smart Card Reader & • WAN / LAN (10/100 PHY, 10Base2/5 - OC-3 /
3.2M / 5.17M Pixel)
• Data Interconnect (Signal Conditioners and
• Image Processors
• Amplifiers & Comparators (Audio, Op Amp, Gain
• Transducers (Ultrasound)
• RF Components (SAW Resonators, SAW RF & IF
• Analog Image Sensor (NTSC/PAL) • Digital Image Sensor (CIF, VGA, 1.3M / 2.0M /
• Optoelectronics (LED Drivers, EL Lamp Drivers) • Power (Switching, Automotive, PFC, Backlight,
®
• Connectivity (CAN, J1850) • Display Drivers (LCD / VFD Driver / Controllers) • Embedded MCU / MPU (4-Bit NX 63K /
• Image Sensor (Camera Modules, Imaging Signal
• Video (Demodulator, Decoders) • Motor Control (Controllers, Drivers, MCU’s) • Microcontrollers (8-bit, 16-bit, ARM7TDMI,
• Communications (CAN, LIN, ZigBee) • Discrete (Diodes, Power MOSFETS, Thyristors,
continued
Nu Horizons Line Card
• Wireless/RF (2.4G / 900M / 433M Transceiver,
Control, Level Detect/Sense, Video)
• Analog Switches (Audio, Data, Video) • Circuit Protection (EMI / RFI Filters) • Clock Management (Synthesizers, ZDB, PLL,
Skew Control, Fan-Out, Buffers, Timers)
• Digital Video Processors • Storage Products (Serial ATA - Parallel ATA,
Parallel ATA Controller, RAID Storage Processors, SATA Controllers, SATA Port Multipliers) • Video Transport (HDMI, DVI and iTMDS Products - Receivers, Transmitters, Switches, PHYs)
• Discretes (FETs, Transistors, Diodes, Rectifiers,
Retimers, Crosspoint Switches, Backplane, Switch Fabrics)
• Ethernet (10/100/1G/10G PHYs, 10/100/1G/10G
MACs, Switches, Transceivers)
Controllers, SATA Controls)
Photodiodes, CDR, MUX, DEMUX, Transceivers, PON)
Processors, TSI, Pointer Processors)
• Storage (FC, SerDes, Transceivers, SAS • Transport Physical Layer (TIAs, Amplifiers, • Transport Processing (VC, FEC, Network
• Interface (232 / 422 / CAN Tranciever, Modulator /
Thyristors)
• Logic (Gates, Inverters, MUX, Latches) • Power Management (PFC, Battery Management,
Demodulators., Smart / SIM)
• Controllers (Flash Memory Card Controller, USB
Supervisors, References, DC/DC Switchers, Off-Line Reg/Ctrl, LDO)
Flash Controller)
graphics engine, Mobile Graphics Coprocessor)
IC)
USB 2.0 Megapixal Image Controller)
• Memory (SDRAM / DDR1, Pseudo SRAM, Serial
Flash, Parallel Flash)
• Embedded Graphics (128-bit 2D/3D mobile
• Mobile Communication (Mobile Satellite TV Tuner • Multimedia SoC (MP3/WMA Digital Audio Player,
• High-Power Laser Diodes (Single, Laser Bar /
Stacks)
• Infrared (Photo detectors, Emitters, Sensors) • Intelligent Displays (Self-Contained LED Displays) • LED’s (Side / Radial / Top Emitters, Arrays, High
Power)
(Including SaRonix)
• Analog Switches (3-17V SPDT-SPST-DPST-MUX,
• • • •
Filters Inductors Isolators Transformers (Modem, Analog/Voice Switching,
DSL, Cable Modem, RJ45, PoE)
• Advanced I/O Controllers (USB-ATA, Southbridge) • Datacom Satellite Receiver (10/100 MAC/PHY
• Environmental (Temperature Sensors, Fan Control) • USB Solutions (Card Reader, Flash Drive, Disk
• Advanced / General Purpose FPGAs • CPLD (32 – 512 Macrocells, Low Power/High
Controller, 10/100PHY, Multimedia Processors, ArcNET, CircNET)
Drive, Hub, PHY)
Performance)
• Bridges (PCI, PCIX, PCI Express – 32/64Bit –
Synthesis & Implementation)
•
Custom HDMI/DVI-PCI-USB-LAN)
66/133MHz) Clock ICs ( VCXOs, Buffers, Drivers, Generators, Skew Controllers) Crystals & Oscillators (Quartz Crystal Resonators) Digital Switches (2-Port, Bus, Crossbar, DDR, Mux/DeMux, Low Voltage Translator) Interface (Re-Drivers, Buffers, Flip-Flops, Gates, Latches, Registers, Transceivers, Voltage Translators) Logic (ALVC, FCT, LCX, LPT) PCI Express Solutions (Packet/Signal Switches, Bridge, PHY, Signal Conditioning, Clock-Buffers/ Generators/Crystals) Translators (Voltage, I/O Signal)
• •
•
• •
•
• Development Platforms • Development Tools (DSP, Embedded Processing, • Intellectual Property (including PCIe, PCI,
• Power Management (AC/DC, Battery
• •
•
• • • •
Management, DC/DC, LDO, MPU - Supervisor, PoE, VDC References, AC Switches) Discretes (Thyristors, Diodes, FETs, Transistors) Signal Conditioning (Comparators, Op-Amps, Clamp Diode Arrays, Crowbar Diodes, EMI Filtering) Logic (3.3V, 5V, Translators, Gates, Switches, Port - Expansion) Sensors (Accelerometers, Proximity, Thermal, Touch) Interface (Smartcard) Wireless (Bluetooth, ZigBee, GPS, RFID) Audio (Decoders, Power Amps, Analog CPU, Digital CPU, Radio)
10/100/1G/10G Ethernet, MPEG4, FEC, PPC, µBlaze, PicoBlaze) • Services (Design Services, Training, XPA)
14
Enhance Your Design...
With Nu Horizons Education and Development Solutions
www.nuhorizons.com/portal
www.nuhorizons.com/labcam
Portal is a monthly publication containing new products, technologies and development tools available from Nu Horizons leading suppliers. Portal is availabe both in print and on the web. Sign up online to receive your copy, be notified of upcoming issues or to request samples of the products found inside.
LabCam delivers online training opportunities in a way that recognizes the value of engineers’ time. As easily as You Tube® videos, engineers can quickly load and watch videos from industry leaders consisting of insights on products, evaluation kit overviews, end-user applications and more. Each tutorial is up to ten minutes in length and features technology experts, CEOs and/ or peers introducing new solutions or explaining integral aspects of an important product, solution or application. This free value-added program is packaged for short, informative and high quality distance learning.
Nu Horizons is proud to present our education and training program, which offers engineers the opportunity to participate in technical seminars conducted by experts focused on the latest technologies from our leading suppliers. This program provides higher velocity learning to help minimize start-up time to quickly begin your design process utilizing the latest development tools, software and products. Check online for the latest seminar schedule.
www.nuhorizons.com/xpresstrack
Online Learning Center www.nuhorizons.com/olc
Application Notes www.nuhorizons.com/appnotes
Development Tools www.nuhorizons.com/devtools
Nu Horizons Online Learning Center is designed to provide a complete training experience for engineers — without having to leave the office. New supplier trainings are posted twice a month and range from new product overviews to in-depth technical training and potential design implementations. These live trainings are recorded and archived for your viewing convenience.
In order to simplify the design process, Nu Horizons has created a series of application notes designed to guide engineers through the process of interfacing different devices together. Using a detailed step-by-step approach, these design guides identify key elements in the design process. Topics in the application notes are organized by design task and each topic is a stand-alone section, with a short introduction or overview, followed by the step-by-step design guidelines. All steps include a sufficient level of detail to provide the designer with relevant information to proceed quickly and easily from start to finish.
Nu Horizons offers a wide range of development / evaluation boards, tools and kits featuring the latest technology from the most trusted suppliers in the industry. Visit the development tool section of our website for a variety of solutions all aimed at providing a low-cost solution for designers to accelerate a product’s time-to-market.