Nspm-konstruksi

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Jembatan

Umum

Sub-sub bidang Judul NSPM Panduan Pelaksanaan Teknik Jembatan Pd-NN35 Kesalahan umum pelaksanaan jalan dan jembatan SNI 03-6883-2002 Spesifikasi toleransi untuk konstruksi dan bahan beton. AASHTO LRFD Bridge Construction Specifications, Caltrans – Construction Manual ISO 6707-1:2004 Building and civil engineering -- Vocabulary -- Part 1: General terms ISO 12006-2:2001 Building construction -- Organization of information about construction works -- Part 2: Framework for classification of information ISO/PAS 12006-3:2001 12006 3:2001 Building construction -- Organization of information about construction works -- Part 3: Framework for object-oriented information exchange ISO/TR 14177:1994 Classification of information in the construction industry ISO 6707-1:2004 Building and civil engineering -- Vocabulary -- Part 1: General terms 210.1R-94: Compendium of Case Histories on Repair of Erosion-Damaged Concrete in Hydraulic Structures (Reapproved 1999) 210R-93: Erosion of Concrete in Hydraulic Structures (Reapproved 1998) ITG-3-04: Report on Bridge Decks Free of Steel Reinforcement 435.7R-85: Report on Temperature Induced Deflections of Reinforced Concrete Members (Reapproved 1997)

Jembatan

Spesifikasi

Umum SNI 03-6861.1-2002 Spesifikasi Bahan Bangunan Bagian A (Bahan Bangunan Bukan Logam) SNI 03-6861.2-2002 Spesifikasi Bahan Bangunan Bagian B (Bahan Bangunan Dari Besi/Baja) SNI 03-6861.3-2002 Spesifikasi Bahan Bangunan Bagian C (Bahan Bangunan Dari Logam Bukan Besi) E2103-06 Standard Classification for Bridge Elements and Related Approach Work 104-87: Preparation of Notation for Concrete (Reapproved 1997) 116R-00: Cement and Concrete Terminology(Reapproved 2005) 117-06 Specifications for Tolerances for Concrete Construction and Materials and Commentary 126.3-99: Guide to Recommended Format for Concrete in Materials Property Database 201.1R-92: Guide for Making a Condition Survey of Concrete in Service (Reapproved 1997) 122R-02: Guide to Thermal Properties of Concrete and Masonry Systems

Sub. Seksi Program dan Pelaksanaan Teknis, 1 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ASCE High-Performance Construction Materials and Systems ASCE Application of Codes, Design and Regulations (Hardcover)

Jembatan

Spesifikasi

Laboratorium SNI 03-6865-2002 Tata cara pelaksanaan program uji antar laboratorium untuk penentuan presisi metode pengujian bahan konstruksi SNI 03-6868-2002 Tata cara pengambilan contoh uji secara acak untuk bahan konstruksi. E105-04 Standard Practice for Probability Sampling Of Materials E575-05 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies E1012-05 Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application E1212-04 Standard Practice for Quality Management Systems for Nondestructive Testing Agencies E251 92(2003) S E251-92(2003) Standard d dT Test M Methods h d ffor P Performance f Ch Characteristics i i off M Metallic lli B Bonded d dR Resistance i S Strain i G Gages E1237-93(2003) Standard Guide for Installing Bonded Resistance Strain Gages E1359-02 Standard Guide for Evaluating Capabilities of Nondestructive Testing Agencies E6-06 Standard Terminology Relating to Methods of Mechanical Testing E1325-02 Standard Terminology Relating to Design of Experiments E1823-05ae1 Standard Terminology Relating to Fatigue and Fracture Testing E529-04 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction E1049-85(2005) Standard Practices for Cycle Counting in Fatigue Analysis E2368-04e1 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing E329-06a Standard Specification for Agencies Engaged in Construction Inspection and/or Testing E438-92(2006) Standard Specification for Glasses in Laboratory Apparatus E541-01 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building E1318-02 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods C1093-06 Standard Practice for Accreditation of Testing Agencies for Unit Masonry CP16PACK: Laboratory Technician Study Package CP1PACK: Field Technician Study Package Epack: Special Education Series Package

Jembatan

Spesifikasi

Agregat SNI 03-1968-1990 Metode Pengujian Tentang Analisis Saringan Agregat Halus dan Kasar

Sub. Seksi Program dan Pelaksanaan Teknis, 2 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-1969-1990 Metode Pengujian Berat Jenis dan Penyerapan Air Agregat Kasar SNI 03-1970-1990 Metode Pengujian Berat Jenis dan Penyerapan Air Agregat Halus SNI 03-1971-1990 Metode Pengujian Kadar Air Agregat SNI 03-2417-1991 Metode Pengujian Keausan Agregat dengan Mesin Abrasi Los Angeles SNI 03-2457-1991 Metode Pengujian Agregat untuk Beton Penahan Radiasi SNI 03-2461-2002 Spesifikasi Agregat Ringan Untuk Beton Ringan Struktur SNI 03-2816.1-1992 Metode Pengujian Kotoran Organik Dalam Pasir Untuk Campuran Mortar Dan Beton. SNI 03-3407-1994 Metode pengujian Sifat Kekekalan Bentuk Agregat Terhadap Larutan Natrium Sulfat Dan Magnesium Sulfat. SNI 03-3416-1994 Metode Pengujian Partikel Ringan Dalam Agregat SNI 03-4137-1996 Metode Pengujian Tebal dan Panjang Rata-rata Agregat SNI 03 03-4141-1996 4141 1996 Metode Pengujian Gumpalan Lempung dan Butir Butir-butir butir Mudah Pecah Dalam Agregat Agregat. SNI 03-4142-1996 Metode Pengujian Jumlah Bahan Dalam Agregat Yang Lolos Saringan No. 200 (0,075 MM); SNI 03-4426-1997 Metode Pengujian Ketahanan Agregat Dengan Alat Tumbuk SNI 03-4428-1997 Metode Pengujian Agregat Halus Atau Pasir Yang Mengandung Bahan Plastis Dengan Cara Setara Pasir SNI 03-4804-1998 Metode Pengujian Bobot Isi Dan Rongga udara Dalam Agregat SNI 03-6477-2000 Metode Penentuan 10 % Kehalusan untuk Agregat SNI 03-6820-2002 Spesifikasi Agregat Halus Untuk Pekerjaan Adukan dan Plesteran Dengan Bahan Dasar Semen SNI 03-6821-2002 Spesifikasi Agregat Ringan Untuk Batu Cetak Beton Pasangan Dinding. SNI 03-6822-2002 Metode Pengujian Analisis Saringan Agregat Hasil Ekstraksi SNI 03-6823-2002 Metode Pengujian Susut Kering Mortar yang Mengandung Semen Portland SNI 03-6824-2002 Metode Pengujian Penentuan Kadar Semen dalam Agregat Bersemen Secara Titrasi SNI 03-6877-2002 Metode Pengujian Kadar Rongga Agregat Halus yang Tidak Dipadatkan SNI 03-6889-2002 Tata Cara Pengambilan Contoh Agregat SNI 13-6717-2002 Tata Cara Penyiapan Benda Uji dari Contoh Agregat SNI 19-4177-1996 Syarat mutu ayakan untuk pengujian ukuran butiran SNI 03-0394-1989 Batu alam untuk bahan bangunan, Mutu dan cara uji SNI 03-0450-1989 Cara uji sifat alkali reaktif campuran semen dengan agregat beton memakai metode batang adukan SNI 19-4177-1996 Syarat mutu ayakan untuk pengujian ukuran butiran

Sub. Seksi Program dan Pelaksanaan Teknis, 3 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-0394-1989 Batu alam untuk bahan bangunan, Mutu dan cara uji SNI 03-0450-1989 Cara uji sifat alkali reaktif campuran semen dengan agregat beton memakai metode batang adukan SNI 03-1749-1990 Agregat untuk aduk dan beton, Cara penentuan besar butir SNI 03-1750-1990 Agregat beton, Mutu dan cara uji SNI 03-1751-1990 Cara penentuan kadar bagian yang lemah. Kadar zat organik, kekerasan pasir, kekerasan batu pecah SNI 03-1753-1990 Agregat kasar untuk beton, Cara penentuan butir halus lebih kecil dari 70 mikron SNI 03-1753-1990 Agregat kasar untuk beton, Cara penentuan butir halus lebih kecil dari 70 mikron SNI 03-1753-1990 Agregat kasar untuk beton, Cara penentuan butir halus lebih kecil dari 70 mikron SNI 03-1754-1990 Agregat halus aduk dan beton, Cara penentuan butir halus lebih kecil dari 50 mikron SNI 03-1755-1990 Agregat halus aduk beton, Cara penentuan kadar zat organik SNI 03-1756-1990 Pasir untuk aduk dan beton, Cara penentuan kekerasan SNI 03 03-1757-1990 1757 1990 Batu pecah atau kerikil alam untuk digunakan sebagai pondasi pengerasan jalan dan agregat beton, Penentuan kekerasan dengan menggunakan bejana tekanan Rudeloff SNI 03-1758-1990 Agregat untuk aduk dan beton, Cara uji sifat kekal terhadap pengaruh larutan jenuh natrium dan magnesium sulfat SNI 03-1765-1990 Agregat kasar untuk beton, Cara uji butiran pipih dan panjang SNI 03-1766-1990 Agregat beton, Cara uji butiran ringan SNI 03-1768-1990 Cara uji sifat reaktif agregat beton dengan metode kimia terhadap alkali SNI 03-3795-1995 Agregat kasar untuk beton, Cara penentuan daya aus gesek dan syarat daya aus gesek mempergunakan bejana Los Angelos SNI 15-0351-1989 Pasir standar, Mutu dan cara uji SNI 19-0312-1989 Pasir cetak, Cara uji AASHTO M 6-03 Fine Aggregate for Portland Cement Concrete AASHTO M 17-95 Mineral Filler for Bituminous Paving Mixtures AASHTO M 29-03 Fine Aggregate for Bituminous Paving Mixtures AASHTO M 43-88 Sizes of Aggregate for Road and Bridge Construction AASHTO M 45-04 Aggregate for Masonry Mortar AASHTO M 80-87 Coarse Aggregate for Portland Cement Concrete AASHTO M 195-00 Lightweight Aggregates for Structural Concrete CEB – FIP : Lightweight aggregate concrete AASHTO T 2-91 (2000) Sampling of Aggregates

Sub. Seksi Program dan Pelaksanaan Teknis, 4 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO T 11-97 (2002) Materials Finer Than 75-gym (No 200) Sieve in Mineral Aggregates by Washing AASHTO T 19/T 19M-00 Bulk Density ("Unit Weight") and Voids in Aggregate AASHTO T 21-00 Organic Impurities in Fine Aggregates for Concrete AASHTO T 27-99 Sieve Analysis of Fine and Coarse Aggregates AASHTO T 30-93 (2003) Mechanical Analysis of Extracted Aggregate AASHTO T 37-01 Sieve Analysis of Mineral Filler for Bituminous Paving Materials AASHTO T 71-93 (2001) Effect of Organic Impurities in Fine Aggregate on Strength of Mortar AASHTO T 84-00 Specific Gravity and Absorption of Fine Aggregate AASHTO T 85-91 (2000) Specific Gravity and Absorption of Coarse Aggregate AASHTO T 96-02 Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine AASHTO T 103-91 (2000) Soundness of Aggregates by Freezing and Thawing AASHTO T 104-99 (2003) Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate AASHTO T 112-00 112 00 Clay Lumps and Friable Particles in Aggregate AASHTO T 113-02 Lightweight Pieces in Aggregate AASHTO T 210-01 Aggregate Durability Index AASHTO T 248-02 Reducing Samples of Aggregate to Testing Size AASHTO T 255-00 Total Evaporable Moisture Content of Aggregate by Drying AASHTO T 279-96 (2001) Accelerated Polishing of Aggregates Using the British Wheel AASHTO T 304-96 (2000) Uncompacted Void Content of Fine Aggregate EN 1097-1:1996 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) EN 1097-1:1996/A1:2003 Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval) EN 1097-10:2002 Tests for mechanical and physical properties of aggregates - Part 10: Determination of water suction height EN 1097-2:1998 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation EN 1097-2:1998/A1:2006 Tests for mechanical and physical properties of aggregates - Part 2: Methods for the determination of resistance to fragmentation EN 1097-3:1998 Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids EN 1097-4:1999 Tests for mechanical and physical properties of aggregates - Part 4: Determination of the voids of dry compacted filler

Sub. Seksi Program dan Pelaksanaan Teknis, 5 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 1097-5:1999 Tests for mechanical and physical properties of aggregates - Part 5: Determination of the water content by drying in a ventilated oven EN 1097-6:2000 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption EN 1097-6:2000/A1:2005 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption EN 1097-6:2000/AC:2002 Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption EN 1097-7:1999 Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method EN 1097-8:1999 Tests for mechanical and physical properties of aggregates - Part 8: Determination of the polished stone value EN 1097-9:1998 Tests for mechanical and physical properties of aggregate - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test EN 1097-9:1998/A1:2005 Tests for mechanical and physical properties of aggregates - Part 9: Determination of the resistance to wear by abrasion from studded tyres - Nordic test EN 12620:2002 Aggregates for concrete EN 12620:2002/AC:2004 Aggregates for concrete EN 13043:2002 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas EN 13043:2002/AC:2004 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas EN 13055-1:2002 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout EN 13055-1:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout EN 13055-2:2004 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications EN 13139:2002/AC:2004 Aggregates for mortar EN 13139:2002 Aggregates for mortar EN 13179-1:2000 Tests for filler aggregate used in bituminous mixtures - Part 1: Delta ring and ball test EN 13179-2:2000 Tests for filler aggregate used in bituminous mixtures - Part 2: Bitumen number EN 13242:2002 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction EN 13242:2002/AC:2004 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction EN 13383-1:2002 Armourstone - Part 1: Specification

Sub. Seksi Program dan Pelaksanaan Teknis, 6 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 13383-1:2002/AC:2004 Armourstone - Part 1: Specification EN 13383-2:2002 Armourstone - Part 2: Test methods EN 13450:2002 Aggregates for railway ballast EN 13450:2002/AC:2004 Aggregates for railway ballast EN 1367-1:1999 Tests for thermal and weathering properties of aggregates - Part 1: Determination of resistance to freezing and thawing EN 1367-2:1998 Tests for thermal and weathering properties of aggregates - Part 2: Magnesium sulfate test EN 1367-3:2001 Tests for thermal and weathering properties of aggregates - Part 3 : Boiling test for "Sonnenbrand basalt" EN 1367-3:2001/AC:2004 Tests for thermal and weathering properties of aggregates - Part 3 : Boiling test for Sonnenbrand basalt EN 1367-4:1998 Tests for thermal and weathering properties of aggregates - Part 4: Determination of drying shrinkage EN 1367-5:2002 Tests for thermal and weathering properties of aggregates - Part 5: Determination of resistance to thermal shock EN 1744-1:1998 Tests for chemical properties of aggregates - Part 1: Chemical analysis EN 1744-3:2002 Tests for chemical properties of aggregates - Part 3: Preparation of eluates by leaching of aggregates EN 1744-4:2005 Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures EN 1744-5:2006 Tests for chemical properties of aggregates - Part 5: Determination of acid soluble chloride salts EN 1744-6:2006 Tests for chemical properties of aggregates - Part 6: Determination of the influence of recycled aggregate extract on the initial setting time of cement EN 932-1:1996 Tests for general properties of aggregates - Part 1: Methods for sampling EN 932-2:1999 Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples EN 932-3:1996 Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description EN 932-3:1996/A1:2003 Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description EN 932-5:1999 Tests for general properties of aggregates - Part 5: Common equipment and calibration EN 932-6:1999 Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility

Sub. Seksi Program dan Pelaksanaan Teknis, 7 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 933-1:1997 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution Sieving method EN 933-1:1997/A1:2005 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method EN 933-10:2001 Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of fillers (air jet sieving) EN 933-2:1995 Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution Test sieves, nominal size of apertures EN 933-3:1997 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index EN 933-3:1997/A1:2003 Tests for geometrical properties of aggregates - Part 3: Determination of particle shape Flakiness index EN 933-4:1999 Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index EN 933-5:1998 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles EN 933-5:1998/A1:2004 Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles EN 933-6:2001 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates EN 933-6:2001/AC:2004 Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates EN 933-7:1998 Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates EN 933-8:1999 Test for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test EN 933-9:1998 Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test JIS A 5011-1:2003 Slag aggregate for concrete -- Part 1: Blast furnace slag aggregate JIS A 5002:2003 Lightweight aggregates for structural concrete JIS TR A 0016:2002 Melt-solidified fine aggregate for concrete derived from municipal solid waste and sewage sludge (Molten slag fine aggregate for concrete) JIS A 5005:1993 Crushed stone and manufactured sand for concrete JIS A 5011-2:2003 Slag aggregate for concrete -- Part 2: Ferronickel slag aggregate JIS A 5011-3:2003 Slag aggregate for concrete -- Part 3: Copper slag aggregate JIS A 5011-4:2003 Slag aggregate for concrete -- Part 4: Electric arc furnace oxidizing slag aggregate

Sub. Seksi Program dan Pelaksanaan Teknis, 8 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM JIS A 5012:1981 Granulated blast furnace slag fine aggregate for concrete JIS A 5021:2005 Recycled aggregate for concrete-class H JIS A 5023:2006 Recycled concrete using recycled aggregate Class L JIS A 5031:2006 JIS A 1102:2006 JIS A 1103:2003 JIS A 1104:2006 JIS A 1105:2001 JIS A 1109:2006 JIS A 1110:2006 JIS A 1111:2001 JIS A 1120:1976

Melt-solidified slag aggregate for concrete derived from municipal solid waste and sewage sludge Method of test for sieve analysis of aggregates Method of test for amount of material passing test sieve 75 mum in aggregates Methods of test for bulk density of aggregates and solid content in aggregates Method of test for organic impurities in fine aggregate Methods of test for density and water absorption of fine aggregates Methods of test for density and water absorption of coarse aggregates Method of test for surface moisture in fine aggregate Method of test for abrasion of coarse aggregate by use of the deval machine

JIS A 1121:2001 Method of test for resistance to abrasion of coarse aggregate by use of the Los Angeles machine JIS A 1122:2005 Method of test for soundness of aggregates by use of sodium sulfate JIS A 1123:2003 Method of test for bleeding of concrete JIS A 1125:2001 JIS A 1126:2001 JIS A 1137:2005 JIS A 1141:2001

Methods of test for total moisture content of aggregate and surface moisture in aggregate by drying Method of test for content of soft particles in coarse aggregate by scratching Method of test for clay lumps contained in aggregates Method of test for particles less than density of 1.95 g/cm*3 in aggregate

JIS A 1142:2001 JIS A 1143:2001 JIS A 1145:2001 JIS A 1146:2001

Method of test for fine aggregate containing organic impurities by compressive strength of mortar Method of test for content of floating particles in lightweight coarse aggregate Method of test for alkali-silica reactivity of aggregates by chemical method Method of test for alkali-silica reactivity of aggregates by mortar-bar method

C1370-00(2005) Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in ChemicalResistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes C144-04 Standard Specification for Aggregate for Masonry Mortar C331-05 Standard Specification for Lightweight Aggregates for Concrete Masonry Units C404-06 Standard Specification for Aggregates for Masonry Grout C778-06 Standard Specification for Standard Sand C29/C29M-97(2003) Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

Sub. Seksi Program dan Pelaksanaan Teknis, 9 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C33-03 Standard Specification for Concrete Aggregates C40-04 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete C70-06 Standard Test Method for Surface Moisture in Fine Aggregate C88-05 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate C117-04 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing C123-04 Standard Test Method for Lightweight Particles in Aggregate C125-06a Standard Terminology Relating to Concrete and Concrete Aggregates C127-04 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate C128-04a Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate C131-06 C131 06 Standard Test Method for Resistance to Degradation of Small-Size Small Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine C136-06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates C289-03 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method) C294-05 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates C295-03 Standard Guide for Petrographic Examination of Aggregates for Concrete C330-05 Standard Specification for Lightweight Aggregates for Structural Concrete C535-03e1 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine C566-97(2004) Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying C586-05 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (RockCylinder Method) C641-98e1 Standard Test Method for Staining Materials in Lightweight Concrete Aggregates C702-98(2003) Standard Practice for Reducing Samples of Aggregate to Testing Size C897-05 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters C943-02 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of PreplacedAggregate Concrete in the Laboratory C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) C1077-06 Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation C1137-05 Standard Test Method for Degradation of Fine Aggregate Due to Attrition C142-97(2004) Standard Test Method for Clay Lumps and Friable Particles in Aggregates

Sub. Seksi Program dan Pelaksanaan Teknis, 10 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D75-03 Standard Practice for Sampling Aggregates D448-03a Standard Classification for Sizes of Aggregate for Road and Bridge Construction D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture D3744-03 Standard Test Method for Aggregate Durability Index D4791-05 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate D4792-00(2006) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions D5444-05 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate D5821-01(2006) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate D6449-99 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method) D6928-06 D6928 06 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Micro Deval Apparatus D7172-06 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared 233R-03: Slag Cement in Concrete and Mortar 523.3R-93: Guide for Cellular Concretes Above 50 pcf and for Aggregate Concrete Above 50 pcf with Compression Strength L E-1(99) Aggregates for Concrete ASCE Use of Recycled Concrete Aggregate (Hardcover)

Jembatan

Spesifikasi

Air SNI 03-6439-2000 Metode Pengujian Ion Khlorida dalam Air SNI 03-6852-2002 Metode Perhitungan Natrium Karbonat Residu Dalam Air. SNI 03-6853-2002 Metode Perhitungan Perbandingan Adsorpsi Natrium Dalam Air. SNI 03-6854-2002 Metode Pengujian Kadar Besi (Fe) Dalam Air Secara Kolo-rimetri Dengan Thiocyanat SNI 03-6855-2002 Metode Pengujian Kadar Mangan (Mn) Dalam Air Secara Kolorimetri Dengan Persulfat SNI 03-6856-2002 Metode Pengujian Kadar Nitrat Dalam Air Secara Kolorimetri Dengan Pereaksi Nessler SNI 03-6857-2002 Metode Pengujian Kadar Nitrit Dalam Air Secara Kolorimetri Dengan Pereaksi Gries Romeyer SNI 06-2412-1991 Metode Pengambilan Contoh Uji Kualitas Air. SNI 06-2413-2002 Metode Pengujian Kadar Padatan Dalam Air . SNI 05-2418-1991 Meter air bersih (ukuran 13 mm s/d 40 mm), Metode pengujian

Sub. Seksi Program dan Pelaksanaan Teknis, 11 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 05-2419-1991 Meter air bersih(ukuran 13 mm s/d 40 mm), Metode pengambilan contoh SNI 03-6817-2002 Metode pengujian mutu air untuk digunakan dalam beton. SNI 06-2502-1991 Metode pengujian kdar minyak dan lemak dalam air secara gravimetrik SNI 06-6859-2002 Metode pengujian angka rasa dalam air SNI 06-6850-2002 Metode pengujian angka bau dalam air AASHTO T 26-79 (2000) Quality of Water to Be Used in Concrete EN 1008:2002 Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete JIS A 1144:2001 Methods of test for chloride concentration in water of fresh concrete D511-03 D511 03 Standard Test Methods for Calcium and Magnesium In Water D512-04 Standard Test Methods for Chloride Ion In Water D513-02 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water D516-02 Standard Test Method for Sulfate Ion in Water D857-02 Standard Test Method for Aluminum in Water D858-02 Standard Test Methods for Manganese in Water D859-05 Standard Test Method for Silica in Water D888-05 Standard Test Methods for Dissolved Oxygen in Water D1068-05e1 Standard Test Methods for Iron in Water D1126-02 Standard Test Method for Hardness in Water D1179-04 Standard Test Methods for Fluoride Ion in Water D1246-05 Standard Test Method for Bromide Ion in Water D1253-03 Standard Test Method for Residual Chlorine in Water D1292-05 Standard Test Method for Odor in Water D1385-01 Standard Test Method for Hydrazine in Water D1426-03 Standard Test Methods for Ammonia Nitrogen In Water D1687-02 Standard Test Methods for Chromium in Water D1688-02 Standard Test Methods for Copper in Water D1691-02 Standard Test Methods for Zinc in Water D1783-01 Standard Test Methods for Phenolic Compounds in Water D1886-03 Standard Test Methods for Nickel in Water D2036-06 Standard Test Methods for Cyanides in Water D2972-03 Standard Test Methods for Arsenic in Water

Sub. Seksi Program dan Pelaksanaan Teknis, 12 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D3082-03 Standard Test Method for Boron In Water D3223-02 Standard Test Method for Total Mercury in Water D3372-02 Standard Test Method for Molybdenum in Water D3373-03 Standard Test Method for Vanadium in Water D3454-05 Standard Test Method for Radium-226 in Water D3557-02 Standard Test Methods for Cadmium in Water D3558-03 Standard Test Methods for Cobalt in Water D3559-03 Standard Test Methods for Lead in Water D3645-03 Standard Test Methods for Beryllium in Water D3697-02 Standard Test Method for Antimony in Water D3859-03 Standard Test Methods for Selenium in Water D3865-02 Standard Test Method for Plutonium in Water D3866-02 Standard Test Methods for Silver in Water D3867-04 D3867 04 Standard Test Methods for Nitrite Nitrite-Nitrate Nitrate in Water D4165-06 Standard Test Method for Cyanogen Chloride in Water

Jembatan

Spesifikasi

Semen SNI 03-6451-2000 Metode Pengujian Kuat Lentur Adukan Semen Hidraulik. SNI 03-6825-2002 Metode Pengujian Kekuatan Tekan Mortar Semen Portland untuk Pekerjaan Sipil SNI 03-6826-2002 Metode Pengujian Konsis-tensi Normal Semen Portland dengan Alat Vicat untuk Pekerjaan Sipil SNI 03-6827-2002 Metode Pengujian Waktu ikat Awal Semen Port land dengan Menggunakan Alat Vicat untuk Pekerjaan Sipil SNI 15-2530-1991 Metode Pengujian Kehalusan Semen Portland SNI 15-2531-1991 Metode Pengujian Berat Jenis Semen Portland SNI 03-6451-2000 Metode pengujian kuat lentur adukan semen hidrolik SNI 15-0301-1989 Semen pozolan kapur, Mutu dan cara uji SNI 15-1854-1990 Cara uji keaktifan pozolan dengan cara kimia dan fisika SNI 15-2530-1991 Semen portland, Metode pengujian kehalusan SNI 15-2531-1991 Semen portland, Metode pengujian berat jenis SNI 15-2531-1991 Semen portland, Metode pengujian berat jenis SNI 15-3500-1994 Semen portland campur SNI 15-3758-1995 Semen aduk pasangan SNI 15-6514-2001 Terak semen portland (klinker semen) SNI 03-6823-2002 Metode pengujian susut kering mortar yang mengandung semen portland.

Sub. Seksi Program dan Pelaksanaan Teknis, 13 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-6824-2002 Metode penentuan kadar semen dalam agregat bersemen secara titrasi. SNI 03-6825-2002 Metode pengujian kekuatan tekan mortar semen portland untuk pekerjaan sipil. SNI 03-6826-2002 Metode pengujian konsistensi normal semen portland dengan alat vicat untuk pekerjaan sipil SNI 03-6827-2002 Metode pengujian waktu ikat awal semen portland dengan menggunakan alat vicat untuk pekerjaan sipil AASHTO M 85-04 Portland Cement AASHTO M 240-04 Blended Hydraulic Cement AASHTO M 295-00 Coal Fly Ash and Raw or Calcined Natural Pozzolanfor Use as a Mineral Admixture in Concrete

AASHTO M 307-04 Use of Silica Fume as a Mineral Admixture in Hydraulic-Cement Concrete Concrete, Mortar, Mortar and Grout AASHTO M 321-04 High-Reactivity Pozzolans for Use in Hydraulic-Cement Concrete, Mortar, and Grout AASHTO T 98-99 Fineness of Portland Cement by the Turbidimeter AASHTO T 105-04 Chemical Analysis of Hydraulic Cement AASHTO T 106M/T 106-04 Compressive Strength of Hydraulic Cement Mortar (Using 50-mm or 2-in Cube Specimens) AASHTO T 107-03 Autoclave Expansion of Portland Cement AASHTO T 127-04 Sampling and Amount of Testing of Hydraulic Cement AASHTO T 128-97 (2001) Fineness of Hydraulic Cement by the 150-gym (No 100) and 75-gym(No 200) Sieves AASHTO T 129-01 Normal Consistency of Hydraulic Cement AASHTO T 131-03 Time of Setting of Hydraulic Cement by Vicat Needle AASHTO T 132-87 (1999) Tensile Strength of Hydraulic Cement Mortars AASHTO T 133-98 (2002) Density of Hydraulic Cement AASHTO T 137-04 Air Content of Hydraulic Cement Mortar AASHTO T 153-02 Fineness of Hydraulic Cement by Air Permeability Apparatus AASHTO T 154-02 Time of Setting of Hydraulic Cement by Gillmore Needles AASHTO T 162-04 Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency AASHTO T 185-01 Early Stiffening of Portland Cement (Mortar Method) AASHTO T 186-01 Early Stiffening of Hydraulic Cement (Paste Method) AASHTO T 188-75 (1999) Evaluation by Freezing and Thawing of Air-Entraining Additions to Portland Cement AASHTO T 192-99 (2003) Fineness of Hydraulic Cement by the 45-gm (No 325) Sieve

Sub. Seksi Program dan Pelaksanaan Teknis, 14 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO T 323-03 Determining the Shear Strength at the Interface of Bonded Layers of Portland Cement Concrete CR 13933:2000 Masonry cement - Testing for workability (cohesivity) CR 14245:2001 Guidelines for the application of EN 197-2 "Conformity Evaluation" EN 13639:2002 Determination of total organic carbon in limestone EN 13639:2002/AC:2004 Determination of total organic carbon in limestone EN 14216:2004 Cement - Composition, specifications and conformity criteria for very low heat special cements EN 14647:2005 Calcium aluminate cement - Composition, specifications and conformity criteria EN 14647:2005/AC:2006 Calcium aluminate cement - Composition, specifications and conformity criteria EN 196-1:2005 Methods of testing cement - Part 1: Determination of strength EN 196-10:2006 196 10:2006 Methods of testing cement - Part 10: Determination of the water-soluble water soluble chromium (VI) content of cement EN 196-2:2005 Methods of testing cement - Part 2: Chemical analysis of cement EN 196-3:2005 Methods of testing cement - Part 3: Determination of setting times and soundness ENV 196-4:1993 Methods of testing cement - Part 4: Quantitative determination of constituents EN 196-5:2005 Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement EN 196-6:1989 Methods of testing cement - Determination of fineness EN 196-7:1989 Methods of testing cement - Methods of taking and preparing samples of cement EN 196-8:2003 Methods of testing cement - Part 8: Heat of hydration - Solution method EN 196-9:2003 Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method EN 197-1:2000 Cement - Part 1: Composition, specifications and conformity criteria for common cements EN 197-1:2000/A1:2004 Cement - Part 1: Composition, specifications and conformity criteria for common cements EN 197-2:2000 Cement - Part 2: Conformity evaluation EN 197-4:2004 Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements EN 413-1:2004 Masonry cement - Part 1: Composition, specifications and conformity criteria EN 413-2:2005 Masonry cement - Part 2: Test methods EN 459-1:2001 Building lime - Part 1: Definitions, specifications and conformity criteria EN 459-1:2001/AC:2002 Building lime - Part 1: Definitions, specifications and conformity criteria EN 459-2:2001 Building lime - Part 2: Test methods EN 459-3:2001 Building lime - Part 3: Conformity evaluation

Sub. Seksi Program dan Pelaksanaan Teknis, 15 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 459-3:2001/AC:2002 Building lime - Part 3: Conformity evaluation JIS R 5201:1997 JIS R 5202:1999 JIS R 5203:1995 JIS R 5204:2002 JIS R 5212:1997 JIS R 5213:1997 JIS A 6201:1999 JIS A 6201:1999 JIS A 6203:2000 JIS A 6204:2006 JIS A 6206:1997

Physical testing methods for cement Methods for chemical analysis of cements Testing method for heat of hydration of cement Chemical analysis method of cement by x-ray fluorescence Portland pozzolan cement Portland fly-ash cement Fly ash for use in concrete Fly ash for use in concrete Polymer dispersions and redispersible polymer powders for cement modifiers Chemical admixtures for concrete Ground granulated blast-furnace slag for concrete

C115-96a(2003) Standard Test Method for Fineness of Portland Cement by the Turbidimeter C150-05 Standard Specification for Portland Cement C151-05 Standard Test Method for Autoclave Expansion of Hydraulic Cement C183-02 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement C186-05 Standard Test Method for Heat of Hydration of Hydraulic Cement C187-04 Standard Test Method for Normal Consistency of Hydraulic Cement C188-95(2003) Standard Test Method for Density of Hydraulic Cement C219-03e1 Standard Terminology Relating to Hydraulic Cement C226-02 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement C230/C230M-03 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement C266-04 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles C305-06 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency C430-96(2003) Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve C451-05 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) C563-04 Standard Test Method for Optimum SO3 in Hydraulic Cement Using 24-h Compressive Strength C595-06 Standard Specification for Blended Hydraulic Cements C596-01 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement C688-00(2005) Standard Specification for Functional Additions for Use in Hydraulic Cements C845-04 Standard Specification for Expansive Hydraulic Cement

Sub. Seksi Program dan Pelaksanaan Teknis, 16 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C1157-03 Standard Performance Specification for Hydraulic Cement C1222-06 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement C1329-05 Standard Specification for Mortar Cement C1565-04 Standard Test Method for Determination of Pack-Set Index of Portland Cement C1608-06 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste C311-05 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete C441-05 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction C618-05 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete C1159-98(2003) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in ChemicalResistant, Rigid Sulfur Concrete C204-05 C204 05 Standard Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus C185-02 Standard Test Method for Air Content of Hydraulic Cement Mortar C191-04b Standard Test Method for Time of Setting of Hydraulic Cement by Vicat Needle C465-99(2005) Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements C786-96(2003) Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods 211.4R-93: Guide for Selecting Proportions for High-Strength Concrete with Portland Cement and Fly Ash (Reapproved 1998) 232.2R-03: Use of Fly Ash in Concrete SP-132: Fly Ash, Silica Fume, Slag, and Natural Pozzolans and Natural Pozzolans in Concrete - Proceedings Fourth Interna SP-79: Fly Ash, Silica Fume, Slag and Other Mineral By-Products in Concrete SP-91: Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete EN 450-1:2005 Fly ash for concrete - Part 1: Definition, specifications and conformity criteria EN 450-2:2005 Fly ash for concrete - Part 2: Conformity evaluation EN 451-1:2003 Method of testing fly ash - Part 1: Determination of free calcium oxide content EN 451-2:1994 Method of testing fly ash - Part 2: Determination of fineness by wet sieving 234R-06: Guide for the Use of Silica Fume in Concrete E301: Cementious Materials for Concrete

Sub. Seksi Program dan Pelaksanaan Teknis, 17 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EB071: Solidification and Stabilization of Waste Using Portland Cement 225R-99: Guide to the Selection and Use of Hydraulic Cements(Reapproved 2005) ASCE Cement Chemistry, Second Edition Cement Manufacture and Use

Jembatan

Spesifikasi

Perletakan Lead or bitumios pads Elastomeric bearing Elastomeric sliding bearing Expansion steel or concrete rocker bearing Steel plane and rocker bearing Steel knuckle bearing Spherical bearing Pot bearing Concrete hinge

SNI 03-3966-1995 Metode Pengujian Kekakuan Tekan dan Kekakuan Geser Bantalan Karet Jembatan SNI 03-3967-1995 Metode pengujian regangan tekan dan tegangan geser bantalan karet jembatan SNI 03-3967-2002 Metode Pengujian Regangan Tekan dan Tegangan Geser Bantalan Karet Jembatan SNI 03-4801-1998 Metode Pengujian Bantalan Karet Untuk Perletakan Jembatan SNI 03-4816-1998 Spesifikasi Bantalan Karet Untuk Perletakan Jembatan SNI 03-3967-2002 Spesifikasi perletakan elastomer jembatan tipe polos dan tipe laminasi SNI 06-3045-1992 Bantalan karet jembatan SNI 06-3568-1994 Karet bantalan dermaga AASHTO M 251-04 Plain and Laminated Elastomeric Bridge Bearings M 251-1 HA - BD 20/92 Bridge Bearings. Use of BS 5400: Part 9: 1983 EN 1337-2:2004 Structural bearings - Part 2: Sliding elements EN 1337-3:2005 Structural bearings - Part 3: Elastomeric bearings EN 1337-4:2004 Structural bearings - Part 4: Roller bearings EN 1337-5:2005 Structural bearings - Part 5: Pot bearings EN 1337-6:2004 Structural bearings - Part 6: Rocker bearings EN 1337-7:2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings EN 1337-10:2003 Structural Bearings - Part 10: Inspection and maintenance

Sub. Seksi Program dan Pelaksanaan Teknis, 18 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 1337-11:1997 Structural bearings - Part 11: Transport, storage and installation EN 1337-9:1997 Structural bearings - Part 9: Protection ISO 6446:1994 Rubber products -- Bridge bearings -- Specification for rubber materials ISO 22762-2:2005 Elastomeric seismic-protection isolators -- Part 2: Applications for bridges – Specifications ISO 22762-2:2005/Cor 1:2006 B22-02 Standard Specification for Bronze Castings for Bridges and Turntables B100-03a Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use D5977-03 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures D4014-03 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

Jembatan

Spesifikasi

Guardrail dan pagar pengaman/ pembatas Standar pengujian guard rail dan pagar pengaman /pembatas Standar pemasangan guard rail dan pagar pengaman /pembatas SNI 03-2446-1991 : Spesifikasi Bangunan Pengaman Tepi Jalan AASHTO M 180-00 Corrugated Sheet Steel Beams for Highway Guardrail AASHTO M 181-98 (2002) Chain-Link Fence AASHTO M 269-96 (2000) Turnbuckles and Shackles AASHTO M 281-96 (2000) Steel Fence Posts and Assemblies, Hot-Wrought HA - Part 2 BA 37/92 Priority Ranking of Existing Parapets

ASTM A741-98(2003) Standard Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail

Jembatan

Spesifikasi

Mortar & Grout , Admixture SNI 03-6430.1-2000 Metode pengujian kuat tekan graut untuk beton dengan agregat praletak di laboratorium

Sub. Seksi Program dan Pelaksanaan Teknis, 19 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-6430.2-2000 Metode pengujian waktu pengikatan graut untuk beton dengan agregat praletak di laboratorium SNI 03-6430.3-2000 Metode pengujian ekspansi dan bliding campuran graut segar untuk beton dengan agregat praletak di laboratorium SNI 03-6807-2002 Metode pengujian kemampuan mempertahankan air pada campuran graut untuk beton agregat praletak di laboratorium. SNI 03-6808-2002 Metode pengujian kekentalan graut untuk beton agregat praletak (metode pengujian corong alir). CEB – FIP : Grouting of tendons in prestressed concrete CEB – FIP : Grouting of vertical ducts EN 445:1996 Grout for prestressing tendons - Test methods EN 446:1996 Grout for prestressing tendons - Grouting procedures EN 447:1996 Grout for prestressing tendons - Specification for common grout EN 480-1:2006 Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing EN 480-10:1996 Admixtures for concrete, mortar and grout - Test methods - Part 10: Determination of water soluble chloride content EN 480-11:2005 Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete EN 480-12:2005 Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures EN 480-13:2002 Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures EN 480-14:2006 Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test EN 480-2:2006 Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time EN 480-4:2005 Admixtures for concrete, mortar and grout - Test methods - Part 4: Determination of bleeding of concrete EN 480-5:2005 Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption EN 480-6:2005 Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis EN 480-8:1996 Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content

Sub. Seksi Program dan Pelaksanaan Teknis, 20 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 934-2:2001 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling EN 934-2:2001/A1:2004 Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling EN 934-2:2001/A2:2005 Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling EN 934-3:2003 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling EN 934-3:2003/AC:2005 Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar Definitions, requirements, conformity, marking and labelling EN 934-4:2001 Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons Definitions, requirements, conformity, marking and labelling EN 934-4:2001/A1:2004 934 4:2001/A1:2004 Admixtures for concrete concrete, mortar and grout - Admixtures for grout for prestressing tendons Part 4: Definitions, requirements, conformity, marking and labelling EN 934-6:2001 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity EN 934-6:2001/A1:2005 Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity EN 14487-1:2005 Sprayed concrete - Part 1: Definitions, specifications and conformity EN 14487-2:2006 Sprayed concrete - Part 2: Execution JIS - TR A 0014:2001 Chemical admixtures for concrete JIS A 1171:2000 Test methods for polymer-modified mortar JIS A 1172:1995 Method of test for strength of polymer-modified mortar JIS A 1173:1978 Method of test for slump of polymer-modified mortar JIS A 1174:1978 Method of test for unit weight and air content (gravimetric) of fresh polymer-modified mortar JIS A 6202:1997 Expansive additive for concrete JIS A 6204:2006 Chemical admixtures for concrete C87-05 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar C109/C109M-05 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50mm] Cube Specimens) C227-03 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

Sub. Seksi Program dan Pelaksanaan Teknis, 21 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C265-06 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar C267-01(2006) Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes C270-06 Standard Specification for Mortar for Unit Masonry C307-03 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings C308-00(2005) Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of ChemicalResistant Resin Mortars C321-00(2005) Standard Test Method for Bond Strength of Chemical-Resistant Mortars C348-02 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars C349-02 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure) C359-06 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method) C387/C387M-06a C387/C387M 06a Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete C395-01(2006) Standard Specification for Chemical-Resistant Resin Mortars C399-98(2003) Standard Practice for Use of Chemical-Resistant Resin Mortars C413-01(2006) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes C414-03 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars C452-06 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate C466-03 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars C476-02 Standard Specification for Grout for Masonry C490-04 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete C531-00(2005) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of ChemicalResistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes C579-01(2006) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes C580-02 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes C806-04 Standard Test Method for Restrained Expansion of Expansive Cement Mortar C807-05 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle C905-01(2006) Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

Sub. Seksi Program dan Pelaksanaan Teknis, 22 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C944-99(2005) Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method C952-02e1 Standard Test Method for Bond Strength of Mortar to Masonry Units C989-06 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars C1012-04 Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution C1038-04 Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water C1059-99 Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete C1142-95(2001) Standard Specification for Extended Life Mortar for Unit Masonry C1148-92a(2002) Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar C1116-03 Standard Specification for Fiber-Reinforced Concrete and Shotcrete C1152/C1152M-04e1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete C1180-03ae1 C1180 03ae1 Standard Terminology of Mortar and Grout for Unit Masonry C1218/C1218M-99 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete C1260-05a Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) C1384-06a Standard Specification for Admixtures for Masonry Mortars C1398-98e1 Standard Test Method for Laboratory Determination of the Time Setting of Hydraulic-Cement Mortars Containing Additives for Shotcrete by the Use of Gillmore Needles C1437-01 Standard Test Method for Flow of Hydraulic Cement Mortar C1438-99(2005)e1 Standard Specification for Latex and Powder Polymer Modifiers for Hydraulic Cement Concrete and Mortar C1439-99e1 Standard Test Methods for Polymer-Modified Mortar and Concrete C1506-03 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters C1567-04 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) C1581-04 Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage C1586-05 Standard Guide for Quality Assurance of Mortars C1655-06 Standard Classification of Fireclay and High-Alumina Mortars C937-02 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete C938-02 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete C939-02 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method) C940-98a(2003) Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for PreplacedAggregate Concrete in the Laboratory

Sub. Seksi Program dan Pelaksanaan Teknis, 23 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C941-02 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory C942-99(2004) Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory C953-06 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory C1019-05 Standard Test Method for Sampling and Testing Grout C1090-01(2005)e1 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of HydraulicCement Grout C1107-05 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink) C1181-00(2005) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts C1339-02e1 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts 212.3R-04: Chemical Admixtures for Concrete 212.4R-04: Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete C-22: Mineral Admixtures C-23: Chemical Admixtures E403: Chemical Admixtures for Concrete SP-119: Superplasticizers and Other Chemical Admixtures in Concrete 506.2-95: Specification for Shotcrete 506.4R-94: Guide For The Evaluation of Shotcrete (Reapproved 2004) 506R-05: Guide to Shotcrete CCS4: Shotcrete for the Craftsman SP-14: Shotcreting 506.1R-98: Committee Report on Fiber- Reinforced Shotcrete CP-60(02): Craftsman Workbook for ACI Certification of Shotcrete Nozzleman SHOTPACK: Shotcrete Package ASCE Grouting and Ground Treatment: Proceedings of the Third International Conference (Softcover) Grouting for Ground Engineering (Softcover) Grouting in Geotechnical Engineering Grouting: Compaction, Remediation and Testing Grouts and Grouting

Sub. Seksi Program dan Pelaksanaan Teknis, 24 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Jembatan

Sub Bidang

Spesifikasi

Sub-sub bidang Judul NSPM Sambungan Siarmuai SNI 03-4429-1997 Metode Pengujian Karet Spon Sebagai Bahan Pengisi Siar Muai Pada Konstruksi Beton SNI 03-4432-1997 Spesifikasi Karet Spon Sebagai Bahan Pengisi Siar Muai Pada Perkerasan Beton dan Konstruksi Bangunan SNI 03-4815-1998 Spesifikasi pengisi siar muai siap pakai untuk perkerasan dan bangunan beton SNI 03-3456-1994 Bahan elastis perapat celah sambungan, Spesifikasi SNI 03-4814-1998 Spesifikasi bahan penutup sambungan beton tipe elastis tuang panas Standar Konstruksi Sambungan siar muai Standar Sambungan Konstruksi P d Pedoman P Pemasangan JJoint i t tterbuka b k Pedoman Pemasangan Joint yang terisi Pedoman Pemasangan Joint yang dapat bergeser, berbentuk jari dan pelat bergerigi Pedoman Pemasangan Joint yang ditekan dan seal berbentuk strip Pedoman Pemasangan Joint Sheet and seal yang berbentuk pelat Pedoman Pemasangan Joint Modular. Pedoman pemasangan joint gap-filled dan buried joint AASHTO M 213-01 Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) AASHTO M 33-99 Preformed Expansion Joint Filler for Concrete (Bituminous Type) AASHTO M 153-98 (2002) Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction AASHTO M 173-01 Discontinued-Concrete Joint-Sealer, Hot-Poured Elastic Type AASHTO M 213-01Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) AASHTO T 42-01 Preformed Expansion Joint Filler for Concrete Construction HA - Part 6 BD 33/94 Expansion Joints for Use in Highway Bridge Decks HA - Part 7 BA 26/94 Expansion Joints for Use in Highway Bridge Decks HA - BA 82/00 Formation of Continuity Joints in Bridge Decks

Sub. Seksi Program dan Pelaksanaan Teknis, 25 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D1752-04a Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction D994-98(2003) Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type) D1751-04 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) D5078-95(2006) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements D6297-01 Standard Specification for Asphaltic Plug Joints for Bridges D5973-97(2003) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing D7174-05 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

Jembatan

Spesifikasi

Sealant AASHTO M 220-84 (1999) Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements AASHTO M 282-99 (2003) Joint Sealants, Hot-Poured, Elastomeric-Type, for PortlandCement Concrete Pavements AASHTO M 297-98 (2002) Preformed Polychloroprene Elastomeric Joint Seals for Bridges AASHTO M 301-01 Discontinued-Joint Sealants, Hot-Poured, for Concrete and Asphalt Pavements AASHTO M 324-04 Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavement E2342-03 Standard Test Method for Durability Testing of Duct Sealants D5535-98(2003) Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements F2468-05 Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications C603-04 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants C639-01 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants C661-06 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer C719-93(2005) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle) C782-03 Standard Test Method for Softness of Preformed Tape Sealants

Sub. Seksi Program dan Pelaksanaan Teknis, 26 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C792-04 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants C793-05 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants C794-06 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants C834-05 Standard Specification for Latex Sealants C907-03 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method C908-00(2006) Standard Test Method for Yield Strength of Preformed Tape Sealants C920-05 Standard Specification for Elastomeric Joint Sealants C961-06 Standard Test Method for Lap Shear Strength of Sealants C972-00(2006) Standard Test Method for Compression-Recovery of Tape Sealant C1016 02 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material C1016-02 C1021-01 Standard Practice for Laboratories Engaged in the Testing of Building Sealants C1135-00(2005) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants C1183-04 Standard Test Method for Extrusion Rate of Elastomeric Sealants C1184-05 Standard Specification for Structural Silicone Sealants C1193-05a Standard Guide for Use of Joint Sealants C1266-02 Standard Test Method for Flow Characteristics of Preformed Tape Sealants C1518-04 Standard Specification for Precured Elastomeric Silicone Joint Sealants C1519-04 Standard Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures C1520-02 Standard Guide for Paintability of Latex Sealants C1521-02a Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints C1523-04 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants C1589-05 Standard Practice for Outdoor Weathering of Construction Seals and Sealants C1620-05 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants D8-02 Standard Terminology Relating to Materials for Roads and Pavements D3406-95(2006) Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements D5329-04 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

Sub. Seksi Program dan Pelaksanaan Teknis, 27 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D5893-04 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements D6690-06a Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements D545-99(2005) Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types) D1828-01e1 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures D1985-03 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks D3542-92(2003) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges D5167-03 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation D2628-91(2005) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements D2835-89(2003) D2835 89(2003) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements D6924-03 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges D5249-95(2006) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints D3141-04 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements D7116-05 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements ACI 224.3R-95: Joints in Concrete Construction (Reapproved 2001) ACI 504R-90: Guide to Joint Sealants for Concrete Structures (Reapproved 1997) ACI SP-94: Joint Sealing & Bearing Systems for Concrete Structures

Jembatan

Pengujian

Cat SNI 06-0469-1989 Cara pemeriksaan awal dan persiapan contoh uji cat, lak, pernis dan sejenisnya SNI 06-0470-1989 Cara penentuan berat jenis cat, lak, pernis dan sejenisnya dengan alat uji tabung berat jenis SNI 06-0476-1989 Cara penentuan daya tutup cat basah dengan alat uji pfund cryptometer SNI 06-0475-1989 Cara penentuan kadar pigmen, kadar bahan penguap dan kadar bahan cair yang tidak menguap dari cat, lak, pernis dan sejenisnya SNI 06-0474-1989 Cara penentuan kehalusan cat, lak, pernis dan sejenisnya

Sub. Seksi Program dan Pelaksanaan Teknis, 28 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 06-0477-1989 SNI 06-0468-1989 diamicrometer SNI 06-0509-1989 SNI 06-0416-1989 SNI 06-0507-1989 SNI 06-0508-1989 SNI 06-0473-1989 SNI 06-0505-1989 SNI 06-0506-1989 SNI 06-0415-1989

Cara penentuan kekentalan cat, lak, pernis dan sejenisnya dengan alat uji cawan Ford (Ford cup) Cara pengukuran ketebalan lapisan kering keras cat, lak, pernis dan sejenisnya dengan alat Cara pengukuran kilat spekular lapisan kering cat, lak, pernis dan sejenisnya Cara penilaian contoh yang di cat atau dilapisi dalam lingkungan yang korosif Cara penilaian tingkat ketahanan lapisan cat terhadap erosi Cara penilaian tingkat lepuh lapisan cat Cara penilaian tingkat pengapuran (chalking) lapisan cat luar secara konvensional Cara penilaian tingkat retak permukaan lapisan cat Cara penilaian tingkat retak tembus lapisan cat Cara penyiapan lempeng baja untuk uji cat, pernis, lak dan sejenisnya

SNI 06 06-0466-1989 0466 1989 Cara penyiapan lempeng logam dasar kaca untuk pengujian cat cat, lak lak, pernis dan sejenisnya SNI 06-4167-1996 Cara uji kekentalan cat dengan alat viscometer stormer SNI 06-6516-2001 Cara uji ketahanan abrasi/gesekan lapisan cat, pernis, lake dan produk sejenisnya dengan menggunakan cara pasir jatuh (falling sand) SNI 06-6516-2001 Cara uji ketahanan abrasi/gesekan lapisan cat, pernis, lake dan produk sejenisnya dengan menggunakan cara pasir jatuh (falling sand) SNI 06-0472-1989 Cara uji ketahanan lapisan cat dan sejenisnya pada lempeng baja terhadap pengaruh cuaca SNI 06-0471-1989 Cara uji ketahanan lapisan cat, lak, pernis dan sejenisnya pada logam terhadap kelembaban nisbi 100% SNI 06-0502-1989 Cat anti fouling untuk lambung bawah kapal baja, Mutu dan cara uji SNI 06-0501-1989 SNI 06-0503-1989 SNI 06-0087-1987 SNI 06-0063-1987 SNI 06-0088-1987 SNI 06-0088-1987 SNI 06-1563-1989 SNI 06-0465-1989 SNI 06-6452-2000 SNI 06-6445-2000 SNI 01-4238-1996

Sub. Seksi Program dan Pelaksanaan Teknis, 29 / 141

Cat anti korosi sistem konvensional untuk lambung bawah kapal baja, Mutu dan cara uji Cat dasar meni besi bermutu sedang untuk besi dan baja Cat dasar meni besi untuk besi dan baja, Mutu Cat dasar meni timbal untuk besi dan baja, Mutu Cat dasar seng kromat untuk besi dan baja, Mutu Cat dasar seng kromat untuk besi dan baja, Mutu Cat seng emulsi Cat, lak, pernis dan sejenisnya, Cara pengambilan contoh Metode pengujian cat bitumen yang digunakan sebagai lapisan pelindung Metode pengujian volume bahan padat pada lapisan cat bening atau berpigmen Mutu dan cara uji damar untuk dempul kayu

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 15-4752-1998 SNI 06-0510-1989 SNI 06-6583-2001 SNI 07-0421-1989 SNI 06-1009-1989 SNI 06-0387-1989 SNI 06-0511-1989 SNI 06-0511-1989 SNI 06-0657-1989 SNI 06-1010-1989 SNI 06-1448-1989 SNI 06-1449-1989 SNI 13-4112-1996

Mutu dan cara uji kalsit untuk bahan pengisi dempul kayu lapis Penentuan waktu mengering lapis lindung organik Pengujian daya serap pigmen terhadap minyak dengan metode Gardner - Coleman Penilaian pengkaratan baja pada permukaan yang dicat Pernis kayu Pigmen besi oksida untuk cat, Mutu Pigmen titanium dioksida untuk cat, Mutu Pigmen titanium dioksida untuk cat, Mutu Plamir kayu Politur Resin fenolik untuk cat Resin melamin untuk cat Syarat mutu dan cara uji kaolin untuk cat

AASHTO T 151-81 (2000) Testing Drying Oils AASHTO T 237-04 Testing Epoxy Resin Adhesive A90/A90M-06 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings A754/A754M-06 Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence D610-01 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces D6489-99(2006) Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating D7234-05 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers D4146-96(2003) Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

ISO 1516:2002 Determination of flash/no flash -- Closed cup equilibrium method ISO 1523:2002 Determination of flash point -- Closed cup equilibrium method ISO 1524:2000 Paints, varnishes and printing inks -- Determination of fineness of grind ISO 2431:1993 Paints and varnishes -- Determination of flow time by use of flow cups

Sub. Seksi Program dan Pelaksanaan Teknis, 30 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 2431:1993/Cor 1:1994 ISO 2431:1993/Cor 2:1999 ISO 2808:2007 Paints and varnishes -- Determination of film thickness ISO 2811-1:1997 Paints and varnishes -- Determination of density -- Part 1: Pyknometer method ISO 2811-2:1997 Paints and varnishes -- Determination of density -- Part 2: Immersed body (plummet) method ISO 2811-3:1997 Paints and varnishes -- Determination of density -- Part 3: Oscillation method ISO 2811-4:1997 Paints and varnishes -- Determination of density -- Part 4: Pressure cup method ISO 2812-1:1993 Paints and varnishes -- Determination of resistance to liquids -- Part 1: General methods ISO 2812-1:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 1: Immersion in liquids other than water ISO 2812-2:2007 2812 2:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 2: Water immersion method ISO 2812-3:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 3: Method using an absorbent medium ISO 2812-4:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 4: Spotting methods ISO 2812-5:2007 Paints and varnishes -- Determination of resistance to liquids -- Part 5: Temperature-gradient oven method ISO 2813:1994 Paints and varnishes -- Determination of specular gloss of non-metallic paint films at 20 degrees, 60 degrees and 85 degrees ISO 2813:1994/Cor 1:1997 ISO 2884-1:1999 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 1: Cone-andplate viscometer operated at a high rate of shear ISO 2884-2:2003 Paints and varnishes -- Determination of viscosity using rotary viscometers -- Part 2: Disc or ball viscometer operated at a specified speed ISO 3231:1993 Paints and varnishes -- Determination of resistance to humid atmospheres containing sulfur dioxide ISO 3233:1998 Paints and varnishes -- Determination of percentage volume of non-volatile matter by measuring the density of a dried coating ISO 3233:1998/Cor 1:1999 ISO 3248:1998 Paints and varnishes -- Determination of the effect of heat ISO 3251:2003 Paints, varnishes and plastics -- Determination of non-volatile-matter content ISO 3679:2004 Determination of flash point -- Rapid equilibrium closed cup method ISO 3680:2004 Determination of flash/no flash -- Rapid equilibrium closed cup method

Sub. Seksi Program dan Pelaksanaan Teknis, 31 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 3856-1:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 1: Determination of lead content -- Flame atomic absorption spectrometric method and dithizone spectrophotometric method ISO 3856-2:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 2: Determination of antimony content -- Flame atomic absorption spectrometric method and Rhodamine B spectrophotometric method ISO 3856-3:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 3: Determination of barium content -- Flame atomic emission spectrometric method ISO 3856-4:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 4: Determination of cadmium content -- Flame atomic absorption spectrometric method and polarographic method ISO 3856-5:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 5: Determination of hexavalent chromium content of the pigment portion of the liquid paint or the paint in powder form -Diphenylcarbazide spectrophotometric method ISO 3856-6:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 6: Determination of total chromium content of the liquid portion of the paint -- Flame atomic absorption spectrometric method ISO 3856-7:1984 Paints and varnishes -- Determination of "soluble" metal content -- Part 7: Determination of mercury content of the pigment portion of the paint and of the liquid portion of water-dilutable paints -- Flameless atomic absorption spectrometric method ISO 4623-1:2000 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 1: Steel substrates ISO 4623-2:2003 Paints and varnishes -- Determination of resistance to filiform corrosion -- Part 2: Aluminium substrates ISO 4623-2:2003/Cor 1:2005 ISO 6270-1:1998 Paints and varnishes -- Determination of resistance to humidity -- Part 1: Continuous condensation ISO 6270-2:2005 Paints and varnishes -- Determination of resistance to humidity -- Part 2: Procedure for exposing test specimens in condensation-water atmospheres ISO 6503:1984 Paints and varnishes -- Determination of total lead -- Flame atomic absorption spectrometric method ISO 6504-1:1983 Paints and varnishes -- Determination of hiding power -- Part 1: Kubelka-Munk method for white and light-coloured paints ISO 6504-3:2006 Paints and varnishes -- Determination of hiding power -- Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate

Sub. Seksi Program dan Pelaksanaan Teknis, 32 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 7252:1984 Paints and varnishes -- Determination of total mercury -- Flameless atomic absorption spectrometric method ISO 7783-1:1996 Paints and varnishes -- Determination of water-vapour transmission rate -- Part 1: Dish method for free films ISO 7783-2:1999 Paints and varnishes -- Coating materials and coating systems for exterior masonry and concrete -Part 2: Determination and classification of water-vapour transmission rate (permeability) ISO 7783-1:1996/Cor 1:1998 ISO 7784-1:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 1: Rotating abrasive-papercovered wheel method ISO 7784-2:1997 Paints and varnishes -- Determination of resistance to abrasion -- Part 2: Rotating abrasive rubber wheel method ISO 7784-3:2000 Paints and varnishes -- Determination of resistance to abrasion -- Part 3: Reciprocating test panel method ISO 8130-1:1992 8130 1:1992 Coating powders -- Part 1: Determination of particle size distribution by sieving ISO 8130-2:1992 Coating powders -- Part 2: Determination of density by gas comparison pyknometer (referee method) ISO 8130-3:1992 Coating powders -- Part 3: Determination of density by liquid displacement pyknometer ISO 8130-4:1992 Coating powders -- Part 4: Calculation of lower explosion limit ISO 8130-4:1992/Cor 1:1993 ISO 8130-5:1992 Coating powders -- Part 5: Determination of flow properties of a powder/air mixture ISO 8130-6:1992 Coating powders -- Part 6: Determination of gel time of thermosetting coating powders at a given temperature ISO 8130-6:1992/Amd 1:1998 ISO 8130-7:1992 Coating powders -- Part 7: Determination of loss of mass on stoving ISO 8130-8:1994 Coating powders -- Part 8: Assessment of the storage stability of thermosetting powders ISO 8130-9:1992 Coating powders -- Part 9: Sampling ISO 8130-10:1998 Coating powders -- Part 10: Determination of deposition efficiency ISO 8130-12:1998 Coating powders -- Part 12: Determination of compatibility ISO 8130-13:2001 Coating powders -- Part 13: Particle size analysis by laser diffraction ISO 9117:1990 Paints and varnishes -- Determination of through-dry state and through-dry time -- Method of test ISO 9514:2005 Paints and varnishes -- Determination of the pot life of multicomponent coating systems -Preparation and conditioning of samples and guidelines for testing ISO 11503:1995 Paints and varnishes -- Determination of resistance to humidity (intermittent condensation)

Sub. Seksi Program dan Pelaksanaan Teknis, 33 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 11890-1:2000 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 1: Difference method ISO 11890-2:2006 Paints and varnishes -- Determination of volatile organic compound (VOC) content -- Part 2: Gaschromatographic method ISO 11997-1:2005 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humidity ISO 11997-2:2000 Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 2: Wet (salt fog)/dry/humidity/UV light ISO 11998:2006 Paints and varnishes -- Determination of wet-scrub resistance and cleanability of coatings ISO 12137-1:1997 Paints and varnishes -- Determination of mar resistance -- Part 1: Method using a curved stylus ISO 12137-2:1997 12137 2:1997 Paints and varnishes -- Determination of mar resistance -- Part 2: Method using a pointed stylus ISO 12137-1:1997/Cor 1:1998 ISO 13803:2000 Paints and varnishes -- Determination of reflection haze on paint films at 20 degrees ISO 15181-1:2000 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides ISO 15181-2:2000 Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate ISO 15184:1998 Paints and varnishes -- Determination of film hardness by pencil test ISO 15234:1999 Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -Determination of the steady-state concentration of formaldehyde in a small test chamber ISO 15711:2003 Paints and varnishes -- Determination of resistance to cathodic disbonding of coatings exposed to sea water ISO 16805:2003 Binders for paints and varnishes -- Determination of glass transition temperature ISO 17895:2005 Paints and varnishes -- Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC) ISO 20566:2005 Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory car-wash ISO 20567-1:2005 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 1: Multi-impact testing ISO 20567-2:2005 Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 2: Single-impact test with a guided impact body

Sub. Seksi Program dan Pelaksanaan Teknis, 34 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO/TR 24430:2003 Paints and varnishes -- Guidelines for the determination of the precision of a test method by interlaboratory trials ISO 1514:2004 Paints and varnishes -- Standard panels for testing ISO 1517:1973 Paints and varnishes -- Surface-drying test -- Ballotini method ISO 1518:1992 Paints and varnishes -- Scratch test ISO 1519:2002 Paints and varnishes -- Bend test (cylindrical mandrel) ISO 1520:2006 Paints and varnishes -- Cupping test ISO 1522:2006 Paints and varnishes -- Pendulum damping test ISO 2409:1992 Paints and varnishes -- Cross-cut test ISO 2815:2003 Paints and varnishes -- Buchholz indentation test ISO 3270:1984 Paints and varnishes and their raw materials -- Temperatures and humidities for conditioning and testing ISO 3678:1976 Paints and varnishes -- Print-free test ISO 4622:1992 Paints and varnishes -- Pressure test for stackability ISO 4624:2002 Paints and varnishes -- Pull-off test for adhesion ISO 6272-1:2002 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter ISO 6272-2:2002 Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 2: Falling-weight test, small-area indenter ISO 6860:2006 Paints and varnishes -- Bend test (conical mandrel) ISO 8130-11:1997 Coating powders -- Part 11: Inclined-plane flow test ISO 9038:2002 Test for sustained combustibility of liquids ISO 15710:2002 Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution ISO 16053:2004 Paints and varnishes -- Coating materials and coating systems for exterior wood -- Natural weathering test ISO 17872:2007 Paints and varnishes -- Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing ISO 21227-2:2006 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 2: Evaluation procedure for multi-impact stone-chipping test ISO 4628-1:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 1: General introduction and designation system ISO 4628-2:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 2: Assessment of degree of blistering

Sub. Seksi Program dan Pelaksanaan Teknis, 35 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 4628-3:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 3: Assessment of degree of rusting ISO 4628-4:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 4: Assessment of degree of cracking ISO 4628-5:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 5: Assessment of degree of flaking ISO 4628-6:2007 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 6: Assessment of degree of chalking by tape method ISO 4628-7:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects and of intensity of uniform changes in appearance -- Part 7: Assessment of degree of chalking by velvet defects, method ISO 4628-8:2005 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 8: Assessment of degree of delamination and corrosion around a scribe ISO 4628-10:2003 Paints and varnishes -- Evaluation of degradation of coatings -- Designation of quantity and size of defects, and of intensity of uniform changes in appearance -- Part 10: Assessment of degree of filiform corrosion ISO 16862:2003 Paints and varnishes -- Evaluation of sag resistance ISO 21227-1:2003 Paints and varnishes -- Evaluation of defects on coated surfaces using optical imaging -- Part 1: General guidance ISO 1513:1992 Paints and varnishes -- Examination and preparation of samples for testing ISO 1513:1992/Cor 1:1994 ISO 2810:2004 Paints and varnishes -- Natural weathering of coatings -- Exposure and assessment ISO 2814:1973 Paints and varnishes -- Comparison of contrast ratio (hiding power) of paints of the same type and colour ISO 3668:1998 Paints and varnishes -- Visual comparison of the colour of paints ISO 6713:1984 Paints and varnishes -- Preparation of acid extracts from paints in liquid or powder form ISO 7724-1:1984 Paints and varnishes -- Colorimetry -- Part 1: Principles ISO 7724-2:1984 Paints and varnishes -- Colorimetry -- Part 2: Colour measurement ISO 7724-3:1984 Paints and varnishes -- Colorimetry -- Part 3: Calculation of colour differences ISO 11341:2004 Paints and varnishes -- Artificial weathering and exposure to artificial radiation -- Exposure to filtered xenon-arc radiation

Sub. Seksi Program dan Pelaksanaan Teknis, 36 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 11507:2007 Paints and varnishes -- Exposure of coatings to artificial weathering -- Exposure to fluorescent UV lamps and water ISO 15528:2000 Paints, varnishes and raw materials for paints and varnishes -- Sampling ISO 19334:2006 Binders for paints and varnishes -- Gum rosin -- Gas-chromatographic analysis

ISO 8502-2:2005 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 2: Laboratory determination of chloride on cleaned surfaces ISO 8502-3:1992 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 3: Assessment of dust on steel surfaces prepared for painting (pressuresensitive tape method) ISO 8502-4:1993 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 4: Guidance on the estimation of the probability of condensation prior to paint application ISO 8502-5:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method ISO 8502-8:2001 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 8: Field method for the refractometric determination of moisture ISO 8502-9:1998 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts ISO 8502-11:2006 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 11: Field method for the turbidimetric determination of water-soluble sulfate ISO 8502-12:2003 Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 12: Field method for the titrimetric determination of water-soluble ferrous ions ISO 11125-1:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 1: Sampling ISO 11125-2:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution

Sub. Seksi Program dan Pelaksanaan Teknis, 37 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 11125-3:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 3: Determination of hardness ISO 11125-4:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 4: Determination of apparent density ISO 11125-5:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 5: Determination of percentage defective particles and of microstructure ISO 11125-6:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 6: Determination of foreign matter ISO 11125-7:1993 Preparation of steel substrates before application of paints and related products -- Test methods for metallic blast-cleaning abrasives -- Part 7: Determination of moisture ISO 11127-1:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling ISO 11127-2:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution ISO 11127-3:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 3: Determination of apparent density ISO 11127-4:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 4: Assessment of hardness by a glass slide test ISO 11127-5:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 5: Determination of moisture ISO 11127-6:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 6: Determination of water-soluble contaminants by conductivity measurement ISO 11127-7:1993 Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 7: Determination of water-soluble chlorides ISO 4522-1:1985 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 1: Determination of coating thickness ISO 4522-2:1985 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 2: Adhesion tests ISO 4522-3:1988 Metallic coatings -- Test methods for electrodeposited silver and silver alloy coatings -- Part 3: Determination of the presence of residual salts ISO 4524-1:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 1: Determination of coating thickness

Sub. Seksi Program dan Pelaksanaan Teknis, 38 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 4524-2:2000 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 2: Mixed flowing gas (MFG) environmental tests ISO 4524-3:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 3: Electrographic tests for porosity ISO 4524-4:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 4: Determination of gold content ISO 4524-5:1985 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 5: Adhesion tests ISO 4524-6:1988 Metallic coatings -- Test methods for electrodeposited gold and gold alloy coatings -- Part 6: Determination of the presence of residual salts ISO 2085:1976 Anodizing of aluminium and its alloys -- Check of continuity of thin anodic oxide coatings -- Copper sulphate test ISO 2135:1984 Anodizing of aluminium and its alloys -- Accelerated test of light fastness of coloured anodic oxide coatings using artificial light ISO 2143:1981 Anodizing of aluminium and its alloys -- Estimation of loss of absorptive power of anodic oxide coatings after sealing -- Dye spot test with prior acid treatment ISO 3613:2000 Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -Test methods ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture ISO 8251:1987 Anodized aluminium and aluminium alloys -- Measurement of wear resistance and wear index of anodic oxidation coatings with an abrasive wheel wear test apparatus ISO 8252:1987 Anodized aluminium and aluminium alloys -- Measurement of mean specific abrasion resistance of anodic oxidation coatings with an abrasive jet test apparatus ISO/TR 11728:1993 Anodized aluminium and aluminium alloys -- Accelerated test of weather fastness of coloured anodic oxide coatings using cyclic artificial light and pollution gas ISO 14918:1998 Thermal spraying -- Approval testing of thermal sprayers ISO 14923:2003 Thermal spraying -- Characterization and testing of thermally sprayed coatings ISO 2819:1980 Metallic coatings on metallic substrates -- Electrodeposited and chemically deposited coatings -Review of methods available for testing adhesion ISO 4516:2002 Metallic and other inorganic coatings -- Vickers and Knoop microhardness tests ISO 6988:1985 Metallic and other non organic coatings -- Sulfur dioxide test with general condensation of moisture ISO 10308:2006 Metallic coatings -- Review of porosity tests ISO 10309:1994 Metallic coatings -- Porosity tests -- Ferroxyl test

Sub. Seksi Program dan Pelaksanaan Teknis, 39 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 10587:2000 Metallic and other inorganic coatings -- Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods -- Inclined wedge method ISO 12687:1996 Metallic coatings -- Porosity tests -- Humid sulfur (flowers of sulfur) test ISO 14647:2000 Metallic coatings -- Determination of porosity in gold coatings on metal substrates -- Nitric acid vapour test ISO 15720:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography ISO 15721:2001 Metallic coatings -- Porosity tests -- Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour ISO 8501-1:1988 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings ISO 8501-1:1988/ Suppl:1994 Representative photographic examples of the change of appearance imparted to steel when blast blast-cleaned cleaned with different abrasives ISO 8501-2:1994 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings ISO 8501-3:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 3: Preparation grades of welds, edges and other areas with surface imperfections ISO 8501-4:2006 Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting ISO 2931:1983 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance ISO 3210:1983 Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxide coatings by measurement of the loss of mass after immersion in phosphoric-chromic acid solution ISO 3211:1977 Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxide coatings to cracking by deformation ISO 2106:1982 Anodizing of aluminium and its alloys -- Determination of mass per unit area (surface density) of anodic oxide coatings -- Gravimetric method ISO 2106:1982/Amd 1:1983 ISO 2128:1976 Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxide coatings -- Nondestructive measurement by split-beam microscope ISO 3892:2000 Conversion coatings on metallic materials -- Determination of coating mass per unit area -Gravimetric methods

Sub. Seksi Program dan Pelaksanaan Teknis, 40 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 6581:1980 Anodizing of aluminium and its alloys -- Determination of the fastness to ultra-violet light of coloured anodic oxide coatings ISO/TR 8125:1984 Anodizing of aluminium and its alloys -- Determination of colour and colour difference of coloured anodic coatings ISO 10215:1992 Anodized aluminium and aluminium alloys -- Visual determination of image clarity of anodic oxidation coatings -- Chart scale method ISO 10216:1992 Anodized aluminium and aluminium alloys -- Instrumental determination of image clarity of anodic oxidation coatings -- Instrumental method ISO 14916:1999 Thermal spraying -- Determination of tensile adhesive strength ISO 17836:2004 Thermal spraying -- Determination of the deposition efficiency for thermal spraying ISO 1460:1992 Metallic coatings -- Hot dip galvanized coatings on ferrous materials -- Gravimetric determination of the mass per unit area ISO 17925:2004 Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, Gravimetry inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness ISO 2360:2003 Non-conductive coatings on non-magnetic electrically conductive basis materials -- Measurement of coating thickness -- Amplitude-sensitive eddy-current method ISO 2376:1972 Anodization (anodic oxidation) of aluminium and its alloys -- Insulation check by measurement of breakdown potential ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method ISO 3543:2000/Cor 1:2003 ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiplebeam interferometry method ISO 3882:2003 Metallic and other inorganic coatings -- Review of methods of measurement of thickness ISO 6719:1986 Anodized aluminium and aluminium alloys -- Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments ISO 7668:1986 Anodized aluminium and aluminium alloys -- Measurement of specular reflectance and specular gloss at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees ISO 7759:1983 Anodizing of aluminium and its alloys -- Measurement of reflectivity characteristics of aluminium surfaces using abridged goniophotometer or goniophotometer ISO 10111:2000 Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods

Sub. Seksi Program dan Pelaksanaan Teknis, 41 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 1463:2003 Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method ISO 2064:1996 Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness ISO 2177:2003 Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution ISO 2178:1982 Non-magnetic coatings on magnetic substrates -- Measurement of coating thickness -- Magnetic method ISO 2361:1982 Electrodeposited nickel coatings on magnetic and non-magnetic substrates -- Measurement of coating thickness -- Magnetic method ISO 3497:2000 Metallic coatings -- Measurement of coating thickness -- X-ray spectrometric methods ISO 3543:2000 Metallic and non-metallic coatings -- Measurement of thickness -- Beta backscatter method ISO 3868:1976 Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiplebeam interferometry method ISO 3882:2003 Metallic and other inorganic coatings -- Review of methods of measurement of thickness ISO 4518:1980 Metallic coatings -- Measurement of coating thickness -- Profilometric method ISO 8401:1986 Metallic coatings -- Review of methods of measurement of ductility ISO 9220:1988 Metallic coatings -- Measurement of coating thickness -- Scanning electron microscope method ISO 10111:2000 Metallic and other inorganic coatings -- Measurement of mass per unit area -- Review of gravimetric and chemical analysis methods ISO 15724:2001 Metallic and other inorganic coatings -- Electrochemical measurement of diffusible hydrogen in steels -- Barnacle electrode method ISO 21968:2005 Non-magnetic metallic coatings on metallic and non-metallic basis materials -- Measurement of coating thickness -- Phase-sensitive eddy-current method ISO 11408:1999 Chemical conversion coatings -- Black oxide coating on iron and steel -- Specification and test methods ISO 1461:1999 Hot dip galvanized coatings on fabricated iron and steel articles -- Specifications and test methods ISO 2093:1986 Electroplated coatings of tin -- Specification and test methods ISO 2179:1986 Electroplated coatings of tin-nickel alloy -- Specification and test methods ISO 4527:2003 Metallic coatings -- Autocatalytic (electroless) nickel-phosphorus alloy coatings -- Specification and test methods ISO 7587:1986 Electroplated coatings of tin-lead alloys -- Specification and test methods ISO 12683:2004 Mechanically deposited coatings of zinc -- Specification and test methods

Sub. Seksi Program dan Pelaksanaan Teknis, 42 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 22778:2006 Metallic coatings -- Physical vapour-deposited coatings of cadmium on iron and steel -Specification and test methods ISO 22779:2006 Metallic coatings -- Physical vapour-deposited coatings of aluminium -- Specification and test methods ISO 8503-2:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel -- Comparator procedure ISO 8503-3:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Focusing microscope procedure ISO 8503-4:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned blast cleaned steel substrates -- Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile -- Stylus instrument procedure ISO 8503-5:2003 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 5: Replica tape method for the determination of the surface profile ISO 8504-1:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 1: General principles ISO 8504-2:2000 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 2: Abrasive blast-cleaning ISO 8504-3:1993 Preparation of steel substrates before application of paints and related products -- Surface preparation methods -- Part 3: Hand- and power-tool cleaning ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products -- Collected information on the effect of levels of water-soluble salt contamination ISO 8503-1:1988 Preparation of steel substrates before application of paints and related products -- Surface roughness characteristics of blast-cleaned steel substrates -- Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces ISO 11124-1:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 1: General introduction and classification ISO 11124-2:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 2: Chilled-iron grit ISO 11124-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 3: High-carbon cast-steel shot and grit

Sub. Seksi Program dan Pelaksanaan Teknis, 43 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 11124-4:1993 Preparation of steel substrates before application of paints and related products -- Specifications for metallic blast-cleaning abrasives -- Part 4: Low-carbon cast-steel shot ISO 11126-1:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 1: General introduction and classification ISO 11126-1:1993/Cor 1:1997 ISO 11126-1:1993/Cor 2:1997 ISO 11126-3:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag ISO 11126-4:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 4: Coal furnace slag ISO 11126-5:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 5: Nickel refinery slag ISO 11126-6:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non non-metallic metallic blast blast-cleaning cleaning abrasives -- Part 6: Iron furnace slag ISO 11126-7:1995 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 7: Fused aluminium oxide ISO 11126-7:1995/Cor 1:1999 ISO 11126-8:1993 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 8: Olivine sand ISO 11126-9:1999 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 9: Staurolite ISO 11126-10:2000 Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 10: Almandite garnet

Jembatan

Spesifikasi

Waterproofing

HA - Part 4 BD 47/99 Waterproofing and Surfacing of Concrete Bridge Decks HA - Part 5 BA 47/99 Waterproofing and Surfacing Concrete Bridge Decks EN 13375:2004 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Specimen preparation EN 13416:2001 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling EN 13583:2001 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing Determination of hail resistance EN 13596:2004 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of bond strength

Sub. Seksi Program dan Pelaksanaan Teknis, 44 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 13653:2004 Flexible sheets for waterproofing - Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles - Determination of shear strength D5295-00(2006) Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems D5957-98(2005) Standard Guide for Flood Testing Horizontal Waterproofing Installations D6153-97(2003) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems D4071-84(2005) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems ACI 515.1R-85: Guide to the Use of Waterproofing, Dampproofing, Protective, and Decorative Barrier Systems for Concrete

Jembatan

Spesifikasi

Tiang Lampu Penerangan dan Tanda-tanda Lalin SNI 03-2444-2002 Spesifikasi bukaan pemisah jalur (Separator) SNI 03-2446-1991 Bangunan pengaman tepi jalan, Spesifikasi C825-06 Standard Specification for Precast Concrete Barriers C935-80(2002) Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast C1089-06 Standard Specification for Spun Cast Prestressed Concrete Poles E2300-06 Standard Specification for Highway Traffic Monitoring Devices E2532-06 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

Jembatan

Spesifikasi

Bahan Lain SNI 03-4147-1996 Spesifikasi kapur untuk stabilisasi tanah C5-03 Standard Specification for Quicklime for Structural Purposes C141-97(2005) Standard Specification for Hydraulic Hydrated Lime for Structural Purposes C1489-01 Standard Specification for Lime Putty for Structural Purposes C821-78(2000) Standard Specification for Lime for Use with Pozzolans C51-06 Standard Terminology Relating to Lime and Limestone (as used by the Industry) C207-06 Standard Specification for Hydrated Lime for Masonry Purposes

Sub. Seksi Program dan Pelaksanaan Teknis, 45 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Jembatan

Sub Bidang

Spesifikasi

Sub-sub bidang Judul NSPM Epoxy, Plastik, Polymer, Resin, Karet SNI 06-4209.2-1998 Plastik-Penentuan sifat tarik. Bagian 2 : Kondisi uji untuk bahan plastik cetak dan bahan plastik ekstrusi SNI 06-4209-1996 Plastik - Penentuan sifat tarik SNI 06-4210-1996 Plastik - Penentuan kuat impak tarik SNI 06-4211-1996 Plastik - Penentuan kuat impak menurut metode Charpy SNI 06-4212-1996 Plastik - Penentuan perilaku krip - Bagian 1 : Krip tarik SNI 06-1903-1990 Standard Indonesian Rubber SNI 06-1903-2000 Standard Indonesian Rubber (SIR) SNI 06-0001-1987 Karet konvensional SNI 06 06-0059-1987 0059 1987 PVC resin, Mutu dan cara uji SNI 06-1318-1989 Resin poliester tidak jenuh untuk "FRP", Jenis umum SNI 06-6446.1-2000 Metode pengujian berat jenis epoksi resin dan bahan pengeras SNI 06-6446.2-2000 Metode pengujian viskositas epoksi-resin dan bahan pengeras AASHTO M 200-73 (2003) Epoxy Protective Coatings AASHTO M 235M/M 235-03 Epoxy Resin Adhesives AASHTO M 237-96 (2000) Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete EN 523:2003 Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control EN 524-1:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 1: Determination of shape and dimensions EN 524-2:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 2: Determination of flexural behaviour EN 524-3:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 3: To-and-fro bending test EN 524-4:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 4: Determination of lateral load resistance EN 524-5:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 5: Determination of tensile load resistance EN 524-6:1997 Steel strip sheaths for prestressing tendons - Test methods - Part 6: Determination of leaktightness (Determination of water loss)

Sub. Seksi Program dan Pelaksanaan Teknis, 46 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM TS A 0020:2004 Test method for bond properties of fiber reinforced polymer (FRP) sheets with concrete TS A 0021:2004 Test method for diect pull-off strength of fiber reinforced polymer (FRP) sheets with concrete TS A 0022:2004 Test method for overlap splice strength of fiber reinforced polymer (FRP) sheets for reinforcement of concrete TS A 0023:2004 Test method for durability of fiber reinforced polymer (FRP) sheets for reinforcement of concrete JIS A 1191:2004 Test method for tensile properties of fiber reinforced polymer (FRP) sheets for reinforcement of concrete JIS A 1192:2005 Test method for tensile properties of fiber reinforced polymer (FRP) bars and grids for reinforcement of concrete JIS A 1193:2005 Test method for alkali resistance of fiber reinforced polymer(FRP) bars and grids for reinforcement of concrete JIS A 6024:1998 Epoxy injection adhesives for repairing in buildings JIS K 6833: General testing methods for adhesives JIS K 7215: Testing Methods for Durometer Hardness of Plastics JIS K 7208: Testing Methods for Compressive Properties of Plastics JIS K 7203: Testing Method for Flexural Properties of Rigid Plastics JIS K 6850: Testing Methods for Strength Properties of Adhesives in Shear by Tension Loading JIS K 7113: Testing Methods for Tensile Properties of Plastics JIS K 7111: Plastics - Determination of Charpy impact testing JIS K 7112: Plastics - Methods of determining the density and relative density of non-celluar plastics ISO 3001:1999 Plastics -- Epoxy compounds -- Determination of epoxy equivalent ISO 3521:1997 Plastics -- Unsaturated polyester and epoxy resins -- Determination of overall volume shrinkage ISO 3673-1:1996 Plastics -- Epoxy resins -- Part 1: Designation ISO 3673-2:1999 Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties ISO 4597-1:2005 Plastics -- Hardeners and accelerators for epoxy resins -- Part 1: Designation ISO 4895:1997 Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize ISO 7142:Binders for paints and varnishes -- Epoxy resins -- General methods of test (available in English only)

Sub. Seksi Program dan Pelaksanaan Teknis, 47 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 15252-1:1999 Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 1: Designation system and basis for specifications ISO 15252-2:1999Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 2: Preparation of test specimens and determination of properties ISO 15252-3:1999 Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 3: Requirements for selected moulding compounds ISO 18280:2005 Plastics -- Epoxy resins -- Test methods (available in English only) ISO 21048:2004 Plastics -- Epoxy resins -- Determination of 1,2-glycol content ISO 21318:2007 Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts (available in English only) ISO 21627-1:2002 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine ISO 21627-2:2002 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine ISO 21627-3:2002 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine

C882-05 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear C884/C884M-98(2005) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay C881/C881M-02 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete C1042-99 Standard Test Method for Bond Strength of Latex Systems Used With Concrete By Slant Shear D1755-92(2001) Standard Specification for Poly(Vinyl Chloride) Resins D1763-00(2005) Standard Specification for Epoxy Resins D5573-99(2005) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints D5868-01 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding D7290-06 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications D2293-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metalto-Metal) D2294-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-toMetal)

Sub. Seksi Program dan Pelaksanaan Teknis, 48 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D6412/D6412M-99(2005) Standard Specification for Epoxy (Flexible) Adhesive for Bonding Metallic and Nonmetallic Materials 503.1-92 - 503.4-92: Four Epoxy Specifications(Reapproved 2003) 503.6R-97: Guide for Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed &Hardened Conc (Reapproved 2003) 503R-93: Use of Epoxy Compounds with Concrete (Reapproved 1998) EIC: Epoxy Injection in Construction, 2nd Edition 548.1R-97: Guide for the Use of Polymers in Concrete 548.3R-03: Polymer-Modified Concrete 548.4-93: Standard Specification for Latex-Modified Concrete (LMC) Overlays (Reapproved 1998) 548.5R-94: Guide for Polymer Concrete Overlays (Reapproved 1998) 548.6R-96: 548.6R 96: Polymer Concrete Concrete-Structural Structural Applications 548.7-04: Test Method for Load Capacity of Polymer Concrete Underground Utility Structures 503.5R-92: Guide for the Selection of Polymer Adhesives in Concrete (Reapproved 2003) 503.6R-97: Guide for Application of Epoxy and Latex Adhesives for Bonding Freshly Mixed &Hardened Conc (Reapproved 2003) SP-116: Polymers in Concrete: Advances and Applications SP-137: Polymer Concrete SP-166: Properties and Uses of Polymers in Concrete SP-169: In-Place Performance of Polymer Concrete Overlays SP-214: Polymers in Concrete: The First Thirty Years SP-69: Applications of Polymer Concrete SP-89: Polymer Concrete: Uses, Materials and Properties SP-99: Polymer Modified Concrete CEB – FIP : Corrugated plastic ducts for internal bonded post-tensioning

Jembatan

Pengujian

Beton SNI 03-1972-1990 Metode Pengujian Slump Beton SNI 03-1973-1990 Metode Pengujian Berat Isi Beton SNI 03-1974-1990 Metode Pengujian Kuat Tekan Beton SNI 03-2458-1991 Metode Pengujian Pengam-bilan Contoh untuk Campuran Beton Segar SNI 03-2491-1991 Metode Pengujian Kuat Tarik Belah Beton SNI 03-2493-1991 Metode Pembuatan dan Perawatan Benda Uji Beton di Laboratorium SNI 03-2834-1992 (2000) Tata Cara Pembuatan Rencana Campuran Beton Normal

Sub. Seksi Program dan Pelaksanaan Teknis, 49 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-4168-1996 Metode Pengujian Hilang Pijar Bahan Belerang Untuk Kaping SNI 06-6369-2000 Tata Cara Pembuatan Kaping untuk Benda Ui Silinder Beton SNI 03-2393-1991 Injeksi semen pada batu, Tata cara pelaksanaan SNI 03-3402-1994 Metode pengujian berat isi beton ringan struktural SNI 03-4431-1997 Metode pengujian lentur beton normal dengan dua titik pembeban SNI 03-3418-1994 Metode pengujian kandungan udara pada beton segar SNI 03-3419-1994 Metode pengujian abrasi beton di laboratorium SNI 03-3421-1994 Beton isolasi ringan, Metode pengujian kuat tekan di lapangan SNI 03-4154-1996 Metode pengujian kuat lentur beton dengan balok uji sederhana yang dibebani terpusat langsung SNI 03-4155-1996 Metode pengujian kuat tekan beton dengan benda uji patahan balok bekas uji lentur SNI 03-4156-1996 Metode pengujian bliding dari beton segar SNI 03-4169-1996 Metode pengujian modulus elastisitas statis dan rasio poison beton dengan kompresometer SNI 03-4805-1998 Metode pengujian kadar semen portland dalam beton keras yang memakai semen hidrolik SNI 03-4806-1998 Metode pengujian kadar semen portland dalam beton segar dengan cara titrasi volumetri SNI 03-4807-1998 Metode pengujian untuk menentukan suhu beton segar semen portland SNI 03-4808-1998 Metode pengujian kadar air dalam beton segar dengan cara titrasi volumetri SNI 03-4809-1998 Metode pengujian untuk membandingkan berbagai beton berdasarkan kuat lekat yang timbul terhadap tulangan SNI 03-4810-1998 Metode pembuatan dan perawatan benda uji beton di lapangan SNI 03-4811-1998 Metode pengujian rangkak pada beton yang tertekan SNI 03-4812-1998 Metode pengujian kuat tarik beton secara langsung SNI 03-4820-1998 Tata cara penggunaan peralatan untuk penentuan perubahan panjang pasta, mortar dan beton semen yang sudah mengeras SNI 03-6369-2000 Tata cara pembuatan benda uji silinder beton SNI 03-6428-2000 Metode pengujian ketahanan abrasi permukaan beton atau mortar dengan metode pemotongan berputar SNI 03-6429-2000 Metode pengujian kuat tekan beton silinder dengan cetakan silinder di dalam tempat cetakan SNI 03-6431-2000 Metode pengujian waktu alir beton berserat dengan kerucut uji slump yang dibalik SNI 03-6432-2000 Metode pengujian perubahan panjang beton akibat reaksi alkali batuan karbonat

Sub. Seksi Program dan Pelaksanaan Teknis, 50 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-6432-2000 Metode pengujian perubahan panjang beton akibat reaksi alkali batuan karbonat SNI 03-6809-2002 Tata cara estimasi kekuatan beton dengan metode maturity SNI 03-6813-2002 Tata cara pembuatan silinder dan prisma uji untuk menentukan kekuatan dan densitas beton agregat praletak di laboratorium SNI 03-6805-2002 Metode pengujian untuk mengukur nilai kuat tekan beton pada umur awal dan memproyeksikan kekuatan pada umur berikutnya. SNI 03-6810-2002 Metode pengujian kadar bahan padat total dan bahan anorganik dalam air untuk campuran beton. SNI 03-6815-2002 Tata cara mengevaluasi hasil uji kekuatan beton. AASHTO T 22-03 Compressive Strength of Cylindrical Concrete Specimens AASHTO T 23-04 Making and Curing Concrete Test Specimens in the Field AASHTO T 24-04 Obtaining and Testing Drilled Cores and Sawed Beams of Concrete AASHTO T 97-03 Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) AASHTO T 119-99 Slump of Hydraulic Cement Concrete AASHTO T 121-97 (2001) Mass per Cubic Meter (Cubic Foot), Yield, and Air Content (Gravimetric)ofConcrete AASHTO T 126-01 Making and Curing Concrete Test Specimens in the Laboratory AASHTO T 140-97 (2001) Compressive Strength of Concrete Using Portions of Beams Broken in Flexure AASHTO T 141-01 Sampling Freshly Mixed Concrete AASHTO T 148-97 (2001) Measuring Length of Drilled Concrete Cores AASHTO T 152-01 Air Content of Freshly Mixed Concrete by the Pressure Method AASHTO T 155-91 (2001) Water Retention by Concrete Curing Materials AASHTO T 157-00 Air-Entraining Admixtures for Concrete AASHTO T 158-01 Bleeding of Concrete AASHTO T 160-97 (2001) Length Change of Hardened Hydraulic Cement Mortar and Concrete AASHTO T 161-00 Resistance of Concrete to Rapid Freezing and Thawing AASHTO T 177-03 Flexural Strength of Concrete (Using Simple Beam with Center-Point Loading) AASHTO T 178-97 (2001) Cement Content of Hardened Portland Cement Concrete AASHTO T 196-96 (2000) Air Content of Freshly Mixed Concrete by the Volumetric Method AASHTO T 197-00 Time of Setting of Concrete Mixtures by Penetration Resistance AASHTO T 198-02 Splitting Tensile Strength of Cylindrical Concrete Specimens AASHTO T 199-00 Air Content of Freshly Mixed Concrete by the Chace Indicator T 199-1 AASHTO T 231-03 Capping Cylindrical Concrete Specimens AASHTO T 253-02 Coated Dowel Bars

Sub. Seksi Program dan Pelaksanaan Teknis, 51 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO T 259-02 Resistance of Concrete to Chloride Ion Penetration AASHTO T 260-97 (2001) Sampling and Testing for Chloride Ion in Concrete and Concrete Raw Materials AASHTO T 271-83 (2000) Density of Plastic and Hardened Portland Cement Concrete In-Place by Nuclear Methods AASHTO T 276-97 (2001) Developing Early-Age Compression Test Values and Projecting Later-Age Strengths AASHTO T 277-96 (2000) Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration AASHTO T 285-89 (2000) Bend Test for Bars for Concrete Reinforcement AASHTO T 299-93 (2000) Rapid Identification of Alkali-Silica Reaction Products in Concrete AASHTO T 303-00 Accelerated Detection of Potentially Deleterious Expansion of Mortar Bars Due to Alkali-Silica Reaction AASHTO T 309-99 Temperature of Freshly Mixed Portland Cement Concrete AASHTO T 318-02 Water Content of Freshly Mixed Concrete Using Microwave Oven Drying AASHTO T 325-04 325 04 Estimating the Strength of Concrete in Transportation Construction by Maturity Tests CR 13902:2000 Test methods for determining the water/cement ratio of fresh concrete EN 12350-1:1999 Testing fresh concrete - Part 1: Sampling EN 12350-2:1999 Testing fresh concrete - Part 2: Slump test EN 12350-3:1999 Testing fresh concrete - Part 3: Vebe test EN 12350-4:1999 Testing fresh concrete - Part 4: Degree of compactability EN 12350-5:1999 Testing fresh concrete - Part 5: Flow table test EN 12350-6:1999 Testing fresh concrete - Part 6: Density EN 12350-7:2000 Testing fresh concrete - Part 7: Air content - Pressure methods EN 12390-1:2000 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds EN 12390-1:2000/AC:2004 Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds EN 12390-2:2000 Testing hardened concrete - Part 2: Making and curing specimens for strength tests EN 12390-3:2001 Testing hardened concrete - Part 3: Compressive strength of test specimens EN 12390-4:2000 Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines EN 12390-5:2000 Testing hardened concrete - Part 5: Flexural strength of test specimens EN 12390-5:2000/AC:2004 Testing hardened concrete - Part 5: Flexural strength of test specimens EN 12390-6:2000 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens EN 12390-6:2000/AC:2004 Testing hardened concrete - Part 6: Tensile splitting strength of test specimens

Sub. Seksi Program dan Pelaksanaan Teknis, 52 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 12390-7:2000 Testing hardened concrete - Part 7: Density of hardened concrete EN 12390-7:2000/AC:2004 Testing hardened concrete - Part 7: Density of hardened concrete EN 12390-8:2000 Testing hardened concrete - Part 8: Depth of penetration of water under pressure CEN/TS 12390-9:2006 Testing hardened concrete - Part 9: Freeze-thaw resistance - Scaling EN 14488-1:2005 Testing sprayed concrete - Sampling fresh and hardened concrete EN 14488-2:2006 Testing sprayed concrete - Part 2: Compressive strength of young sprayed concrete EN 14488-3:2006 Testing sprayed concrete - Part 3: Flexural strengths (first peak, ultimate and residual) of fibre reinforced beam specimens EN 14488-4:2005 Testing sprayed concrete - Part 4: Bond strength of cores by direct tension EN 14488-5:2006 Testing sprayed concrete - Part 5: Determination of energy absorption capacity of fibre reinforced slab specimens EN 14488-6:2006 Testing sprayed concrete - Part 6: Thickness of concrete on a substrate EN 14488-7:2006 Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete EN 14845-2:2006 14845 2:2006 Test methods for fibres in concrete - Part 2: Effect on concrete EN 1170-1:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 1: Measuring the consistency of the matrix "Slump test" method EN 1170-2:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 2: Measuring the fibre content in fresh GRC, "Wash out test" EN 1170-3:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 3: Measuring the fibre content of sprayed GRC EN 1170-4:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 4: Measuring bending strength, "Simplified bending test" method EN 1170-5:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 5: Measuring bending strength, "Complete bending test" method EN 1170-6:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 6: Determination of the absorption of water by immersion and determination of the dry density EN 1170-7:1997 Precast concrete products - Test method for glass-fibre reinforced cement - Part 7: Measurement of extremes of dimensional variations due to moisture content ENV 1170-8:1996 Test method for glass-fibre reinforced cement - Part 8: Cyclic weathering type test EN 14651:2005 Test method for metallic fibered concrete - Measuring the flexural tensile strength (limit of proportionality (LOP), residual) EN 14721:2005 Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete EN 14474:2004 Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods

Sub. Seksi Program dan Pelaksanaan Teknis, 53 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 14649:2005 Precast concrete products - Test method for strength retention of glass fibres in cement and concrete (SIC TEST) EN 12269-1:2000 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the "beam test" - Part 1: Short term test EN 12269-2:2003 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test - Part 2: Long term test EN 1351:1997 Determination of flexural strength of autoclaved aerated concrete EN 1352:1996 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 1353:1996 Determination of moisture content of autoclaved aerated concrete EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure EN 1355:1996 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 1356:1996 Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure EN 1737:1998 Determination of shear strength of welded joints of reinforcement mats or cages for prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 1738:1998 Determination of steel stresses in unloaded reinforced components made of autoclaved aerated concrete EN 1739:1998 Determination of shear strength for in-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 1740:1998 Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components) EN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 1742:1998 Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 678:1993 Determination of the dry density of autoclaved aerated concrete EN 679:2005 Determination of the compressive strength of autoclaved aerated concrete EN 680:2005 Determination of the drying shrinkage of autoclaved aerated concrete EN 989:1995 Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the "Push-Out" test

Sub. Seksi Program dan Pelaksanaan Teknis, 54 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure EN 991:1995 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure EN 992:1995 Determination of the dry density of lightweight aggregate concrete with open structure JIS A 1101:2005 JIS A 1112:2003 JIS A 1113:2006 JIS A 1114:2002 JIS A 1115:2005 JIS A 1116:2005 JIS A 1118:1997 JIS A 1119:2005 contents JIS A 1123:2003 JIS A 1128:2005 JIS A 1128:2005 JIS A 1129:1993

Method of test for slump of concrete Method of test for washing analysis of fresh concrete Method of test for splitting tensile strength of concrete Method of sampling and testing for strength of sawed prism of concrete Method of sampling fresh concrete Method of test for unit mass and air content of fresh concrete by mass method Method of test for air content of fresh concrete by volumetric method Method of test for variability of freshly mixed concrete by measuring mortar and coarse aggregate Method of test for bleeding of concrete Method of test for air content of fresh concrete by pressure method Method of test for air content of fresh concrete by pressure method Methods of test for length change of mortar and concrete

JIS A 1129-1:2001 Methods of test for length change of mortar and concrete Part 1: Method with comparator JIS A 1129-2:2001 Methods of test for length change of mortar and concrete Part 2: Method with contact-type strain gauge JIS A 1129-3:2001 Methods of test for length change of mortar and concrete Part 3: Method with dial gague JIS A 1132:2006 Method of making and curing concrete specimens JIS A 1134:2006 Methods of test for particle density and water absorption of lightweight fine aggregates for structural concrete JIS A 1135:2006 Methods of test for particle density and water absorption of lightweight coarse aggregates for structural concrete JIS A 1136:1993 Method of test for compressive strength of spun concrete JIS A 1138:2005 Method of making test sample of concrete in laboratory JIS A 1139:1993 Method of biannual compressive loading test of concrete JIS A 1140:1978 Method of test for compressive strength of reinforced concrete street and house inlet JIS A 1181:2005 Test methods for polymer concrete JIS A 1182:1995 Method of test for compressive strength of polyester resin concrete

Sub. Seksi Program dan Pelaksanaan Teknis, 55 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM JIS A 1183:1995 Method of test for compressive strength of polyester resin concrete using portions of beams broken in flexure JIS A 1184:1995 Method of test for flexural strength of polyester resin concrete JIS A 1185:1995 Method of test for splitting tensile strength of polyester resin concrete JIS A 1186:1995 Measuring methods for working life of polyester resin concrete JIS A 1150:2001 Method of test for slump flow of concrete JIS A 1147:2001 Test method for time of setting of concrete mixtures by penetration resistance JIS A 1148:2001 Method of test for resistance of concrete to freezing and thawing JIS A 1149:2001 Method of test for static modulus of elasticity of concrete JIS A 1151:2002 Method of test for drying shrinkage cracking of restricted concrete JIS A 1152:2002 Method for measuring carbonation depth of concrete JIS A 1153:2003 Method of accelerated carbonation test for concrete JIS A 1154:2003 Methods of test for chloride ion content in hardened concrete JIS A 1155:2003 Method of measurement for rebound number on surface of concrete JIS A 1156:2006 Method of measurement for temperature of fresh concrete JIS A 1161:1994 Testing methods for bulk specific gravity, water content, absorption and compressive strength of cellular concrete JIS A 1162:1973 Testing methods for volume change of cellular concrete JIS TR A 0015:2002 Crushed stone powder for concrete C31/C31M-06 Standard Practice for Making and Curing Concrete Test Specimens in the Field C39/C39M-05e1 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens C42/C42M-04 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete C78-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) C138/C138M-01a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete C143/C143M-05a Standard Test Method for Slump of Hydraulic Cement Concrete C156-05 Standard Test Method for Water Retention by Concrete Curing Materials C157/C157M-06 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete C173/C173M-01e1 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method C192/C192M-06 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory C231-04 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

Sub. Seksi Program dan Pelaksanaan Teknis, 56 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C232-04 Standard Test Methods for Bleeding of Concrete C233-04 Standard Test Method for Air-Entraining Admixtures for Concrete C293-02 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading) C418-05 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting C457-06 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete C469-02e1 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression C470/C470M-02a Standard Specification for Molds for Forming Concrete Test Cylinders Vertically C496/C496M-04e1 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens C512-02 Standard Test Method for Creep of Concrete in Compression C567-05a C567 05a Standard Test Method for Determining Density of Structural Lightweight Concrete C642-06 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete C684-99(2003) Standard Test Method for Making, Accelerated Curing, and Testing Concrete Compression Test Specimens C779/C779M-05 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces C796-04 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam C803/C803M-03 Standard Test Method for Penetration Resistance of Hardened Concrete C873-04 Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds C878/C878M-03 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete C900-01 Standard Test Method for Pullout Strength of Hardened Concrete C948-81(2001) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete C995-01 Standard Test Method for Time of Flow of Fiber-Reinforced Concrete Through Inverted Slump Cone C1040-05 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods C1064/C1064M-05 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete C1084-02 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete C1105-05 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction C1138M-05 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

Sub. Seksi Program dan Pelaksanaan Teknis, 57 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C1228-96(2004) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete C1229-94(2001) Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test) C1230-96(2004) Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads C1245/C1245M-06 Standard Test Method for Determining Bond Strength Between Hardened Roller Compacted Concrete and Other Hardened Cementitious Mixtures (Point Load Test) C1293-06 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction C1312-97(2003) Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory C1362-04 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete C1399-04 C1399 04 Test Method for Obtaining Average Residual-Strength Residual Strength of Fiber-Reinforced Fiber Reinforced Concrete C1404/C1404M-98(2003) Standard Test Method for Bond Strength of Adhesive Systems Used with Concrete as Measured by Direct Tension C1542/C1542M-02 Standard Test Method for Measuring Length of Concrete Cores C1550-05 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel) C1579-06 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert) C1583-04 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method) C1585-04 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes C1609/C1609M-05 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading) C1610/C1610M-06 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique C1611/C1611M-05 Standard Test Method for Slump Flow of Self-Consolidating Concrete C1621/C1621M-06 Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring C511-06 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

Sub. Seksi Program dan Pelaksanaan Teknis, 58 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C947-03 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) C172-04 Standard Practice for Sampling Freshly Mixed Concrete C341/C341M-06 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete C617-98(2003) Standard Practice for Capping Cylindrical Concrete Specimens C172-04 Standard Practice for Sampling Freshly Mixed Concrete C341/C341M-06 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete C617-98(2003) Standard Practice for Capping Cylindrical Concrete Specimens C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions C856-04 Standard Practice for Petrographic Examination of Hardened Concrete C1231/C1231M-00e1 C1231/C1231M 00e1 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders C1017/C1017M-03 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete C1074-04 Standard Practice for Estimating Concrete Strength by the Maturity Method D4263-83(2005) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

374.1-05: Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary CP-1(06) Spanish Field Test Technician Workbook CP-1(07) Technicial Workbook for ACI Certification of Concrete Field Testing Technician-Grade 1 CP-16(07) Technician Workbook for ACI Certification of Concrete Laboratory Testing Technician Grade I CP-17(07) Technician Workbook for ACI Certification on Concrete Laboratory Testing Technician Grade II CP17Pack: Concrete Laboratory Testing Package CP-40(05): Technician Workbook for ACI Certification of Aggregate Field Testing Technician CP-41(05): Technician Workbook for ACI Certification of Aggregate Laboratory Testing Technician SCM-30(04): Basics of Concrete Materials and Testing SP-101: Computer Use for Statistical Analysis of ConcreteTest Data SP-211: LARGE-SCALE STRUCTURAL TESTING SP-56: Accelerated Strength Testing STPCCMM: Significance of Tests and Properties of Concrete and Concrete-Making Materials SP-143: New Experimental Techniques for Evaluating Concrete Material & Structural Performance

Sub. Seksi Program dan Pelaksanaan Teknis, 59 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ASCE Evaluation of the Troxler Model 4430 Water-Cement Gauge

Jembatan

Pengujian

Baja Struktural, Tulangan Baja dan Kabel SNI 05-0719-1989 Cara uji keras mikro Vickers beban 0,0098 sampai dengan 49 N SNI 07-0309-1989 Cara percobaan tarik logam SNI 07-0066-1987 Baja lembaran lapis seng yang diberi lapisan cat berwarna, Mutu dan cara uji SNI 07-0070-1987 Baja siku sama kaki bertepi bulat canai panas hasil rerolling, Mutu dan cara uji SNI 07-0075-1987 Batang kawat baja karbon rendah untuk kawat inti elektroda las, Mutu dan cara uji SNI 07-0052-1987 Baja kanal bertepi bulat canai panas, Mutu dan cara uji SNI 07 07-0066-1987 0066 1987 Baja lembaran lapis seng yang diberi lapisan cat berwarna, Mutu dan cara uji SNI 07-0070-1987 Baja siku sama kaki bertepi bulat canai panas hasil rerolling, Mutu dan cara uji SNI 07-0075-1987 Batang kawat baja karbon rendah untuk kawat inti elektroda las, Mutu dan cara uji SNI 07-0307-1989 Besi tuang kelabu, Cara percobaan lengkung SNI 07-0308-1989 Baja karbon, Cara uji komposisi kimia SNI 07-0309-1989 Cara percobaan tarik logam SNI 07-0313-1989 Besi tuang kelabu, Mutu dan cara uji SNI 07-0322-1989 Baja strip canai panas, Mutu dan cara uji SNI 07-0329-1989 Baja bentuk I bertepi bulat canai panas, Mutu dan cara uji SNI 07-0354-1989 Batang uji pukul untuk bahan logam SNI 07-0355-1989 Baja karbon cor, Mutu SNI 07-0356-1989 Besi cor maleabel hitam, Mutu dan cara uji SNI 07-0371-1998 Batang uji tarik untuk bahan logam SNI 07-0372-1989 Batang uji lengkung untuk bahan logam SNI 07-0375-1989 Batang kawat baja karbon tinggi, Mutu dan cara uji SNI 07-0376-1989 Kawat baja karbon tinggi, Mutu dan cara uji SNI 07-0408-1989 Cara uji tarik logam SNI 07-0410-1989 Cara uji lengkung tekan logam SNI 07-0412-1989 Besi tuang kelabu, Cara uji lentur SNI 07-0413-1989 Cara uji ketahanan korosi dengan semprot kabut garam SNI 07-0414-1989 Alat uji korosi dengan semprot kabut garam SNI 07-0420-1989 Ingot baja karbon, Mutu dan cara uji SNI 07-0422-1989 Billet baja tuang kontinyu, Mutu dan cara uji

Sub. Seksi Program dan Pelaksanaan Teknis, 60 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 07-0423-1989 Billet mini baja karbon, Mutu dan cara uji SNI 07-0478-1989 Tahan korosi dipercepat dengan semprot kabut garam asam asetat, Cara uji SNI 07-0479-1989 Ketahanan korosi dipercepat dengan semprot kabut garam asam asetat - garam tembaga, Cara uji SNI 07-0500-1989 Korosi logam di atmosfir, Cara uji SNI 07-0549-1989 Cara mencatat data uji korosi baja lapis logam di atmosfir SNI 07-0552-1989 Kawat baja, Cara uji puntir SNI 07-0660-1989 Benda uji korosi, Cara penyiapan, pembersihan dan penelitian SNI 07-0812-1989 Logam paduan besi, Cara pengambilan contoh uji untuk penetapan komposisi kimia SNI 07-1335-1989 Baja tahan karat dan paduan tahan karat terhadap korosi sumur dan korosi celah dengan larutan feri klorida, Cara uji ketahanan SNI 07-1336-1989 Cara uji, definisi dan istilah partikel elektromaknit SNI 07-1337-1989 Baja dan paduan tahan panas pada suhu tinggi, Cara uji tarik SNI 07 07-1858-1990 1858 1990 Cara uji struktur makro baja SNI 07-1861-1990 Cara uji mampu keras baja SNI 07-2054-1990 Baja siku sama kaki bertepi bulat canai panas, Mutu dan cara uji SNI 07-2529-1991 Baja beton, Metode pengujian kuat tarik SNI 07-3112-1992 Deteksi kerentanan terhadap korosi antar butir baja tahan karat austenit, Uji asam nitrat SNI 07-3113-1992 Struktur baja tahan karat austenitik, Cara uji klasifikasi dengan asam oksalat 10% SNI 07-3115-1992 Deteksi kerentanan terhadap korosi antar butir baja tahan karat austenit molibdem, Uji asam nitrat - asam hidrofluorat SNI 07-3116-1992 Deteksi kerentanan terhadap korosi antar butir pada baja tahan karat austenit, Uji feri sulfat asam sulfat SNI 07-3121-1992 Deteksi kerentanan terhadap korosi antar butir baja tahan karat austenit, Uji tembaga sulfat Asam sulfat 16% SNI 07-3653-1995 Baja - Uji fatik tegangan torsi SNI 07-3656-1995 Baja perkakas dan baja bantalan - Metode referensi mikrografis dalam menentukan distribusi karbida SNI 07-3657-1995 Baja - Penentuan ketebalan total atau efektif dari lapisan permukaan keras yang tipis SNI 07-4008-1996 Persiapan dan penggunaan benda uji korosi tegang dengan beban tarik SNI 07-4609-1998 Cara uji tarik cincin untuk tube dari bahan logam SNI 07-4610-1998 Cara uji tekuk bolak-balik lembaran dan strip dengan tebal lebih kecil sama dengan 3 mm dari bahan logam SNI 07-4611-1998 Cara uji tekuk bolak balik untuk kawat dari bahan logam SNI 07-4612-1998 Cara uji lengkung tube penampang penuh dari bahan logam

Sub. Seksi Program dan Pelaksanaan Teknis, 61 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 07-6013-1999 Cara uji kimia baja tahan karat SNI 07-6732-2002 Cara uji impak material logam SNI 07-6736-2002 Cara uji tarik material logam pada temperatur tinggi SNI 19-0405-1989 Cara uji keras Brinell SNI 19-0406-1989 Cara uji keras rockwell B SNI 19-0407-1998 Cara uji keras Rockwell (skala A - B - C - D - E - F - G - H - K ) SNI 19-0409-1989 Cara uji keras Vickers SNI 19-0411-1989 Cara uji pukul charpy SNI 19-0720-1989 Cara uji keras Rockwell N SNI 19-0721-1989 Cara uji keras Rockwell T SNI 19-4001-1996 Metode uji rayapan ruptur untuk material logam SNI 19-4002-1996 Metode uji rayapan tarik material logam SNI 03-6879-2002 Metode pengujian pH tanah untuk uji korosi logam. AASHTO T 65M/ T 65-97 (2001) Mass [Weight] of Coating on Iron and Steel Articles with Zinc or Zinc- Alloy Coatings AASHTO T 68-03 Tension Testing of Metallic Materials AASHTO T 70-01 Brinell Hardness of Metallic Materials AASHTO T 80-03 Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials AASHTO T 213M/T 213-03 Mass [Weight] of Coating on Aluminum-Coated Iron or Steel Articles AASHTO T 243M/T 243-03 Sample Procedure for Impact Testing of Structural Steel AASHTO T 244-03 Mechanical Testing of Steel Products AASHTO T 266-03 Notched Bar Impact Testing of Metallic Materials (CVN) HA - Part 8 BD 7/01 Weathering Steel for Highway Structures EN 13391:2004 Mechanical tests for post-tensioning systems

E8M-04 Standard Test Methods for Tension Testing of Metallic Materials [Metric] E9-89a(2000) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature E10-01e1 Standard Test Method for Brinell Hardness of Metallic Materials E18-05e1 Standard Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials E21-05 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

Sub. Seksi Program dan Pelaksanaan Teknis, 62 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM E23-06 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials E45-05 Standard Test Methods for Determining the Inclusion Content of Steel E92-82(2003)e2 Standard Test Method for Vickers Hardness of Metallic Materials E103-84(2002) Standard Test Method for Rapid Indentation Hardness Testing of Metallic Materials E110-82(2002) Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers E111-04 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus E112-96(2004)e2 Standard Test Methods for Determining Average Grain Size E132-04 Standard Test Method for Poisson's Ratio at Room Temperature E139-06 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials E143-02 Standard Test Method for Shear Modulus at Room Temperature E290-97a(2004) Standard Test Methods for Bend Testing of Material for Ductility E328-02 E328 02 Standard Test Methods for Stress Relaxation Tests for Materials and Structures E647-05 Standard Test Method for Measurement of Fatigue Crack Growth Rates E488-96(2003) Standard Test Methods for Strength of Anchors in Concrete and Masonry Elements E73-83(2002) Standard Practice for Static Load Testing of Truss Assemblies E213-04 Standard Practice for Ultrasonic Examination of Metal Pipe and Tubing E1476-04 Standard Guide for Metals Identification, Grade Verification, and Sorting E1659-05 Standard Test Methods Coating Weight and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet E1077-01(2005) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens E1019-03 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron, Nickel, and Cobalt Alloys E1457-00 Standard Test Method for Measurement of Creep Crack Growth Rates in Metals E1512-01 Standard Test Methods for Testing Bond Performance of Bonded Anchors E1820-06 Standard Test Method for Measurement of Fracture Toughness

Jembatan

Pengujian

Las SNI 07-3688-1995 Cara uji keretakan las galur - U SNI 07-3689-1995 Cara uji keretakan las galur - Y SNI 07-3695-1995 Cara uji kekerasan maksimum pada zona terpengaruh panas hasil pengelasan SNI 07-3697-1995 Cara uji kekerasan deposit logam las SNI 07-3806-1995 Cara uji lengkung untuk sambungan lasan tumpul SNI 07-3807-1995 Cara uji lengkung bolak balik untuk sambungan lasan tumpul SNI 07-4076-1996 Cara uji lengkung bebas untuk sambungan lasan tumpul

Sub. Seksi Program dan Pelaksanaan Teknis, 63 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 07-4077-1996 Cara uji tarik dan pukul deposit logam lasan SNI 07-4411-1997 Cara uji ketebalan lapisan email dengan metoda magnetik E190-92(2003) Standard Test Method for Guided Bend Test for Ductility of Welds E273-01(2005) Standard Practice for Ultrasonic Examination of the Weld Zone of Welded Pipe and Tubing E390-01(2006)e1 Standard Reference Radiographs for Steel Fusion Welds E426-98(2003)e1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Austenitic Stainless Steel and Similar Alloys E749-01 Standard Practice for Acoustic Emission Monitoring During Continuous Welding E751-01 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding E1032-06 Standard Test Method for Radiographic Examination of Weldments E1033-98(2004)e1 Standard Practice for Electromagnetic (Eddy-Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature E1416-04 E1416 04 Standard Test Method for Radioscopic Examination of Weldments E1648-95(2006) Standard Reference Radiographs for Examination of Aluminum Fusion Welds E1955-04 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM E 390 Reference Radiographs E1961-06 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units E2261-03 Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique ISO 15011-1:2002 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 1: Determination of emission rate and sampling for analysis of particulate fume ISO 15011-2:2003 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases generated by arc welding -- Part 2: Determination of emission rates of gases, except ozone ISO 15011-4:2006 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 4: Fume data sheets ISO/TS 15011-5:2006 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials ISO 14555:2006 Welding -- Arc stud welding of metallic materials ISO 15607:2003 Specification and qualification of welding procedures for metallic materials -- General rules

Sub. Seksi Program dan Pelaksanaan Teknis, 64 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 15607:2003/Cor 1:2005 ISO 15609-1:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 1: Arc welding ISO 15609-1:2004/Cor 1:2005 ISO 15609-2:2001 Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 2: Gas welding ISO 15609-3:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 3: Electron beam welding ISO 15609-4:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 4: Laser beam welding ISO 15609-5:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 5: Resistance welding ISO 15610:2003 Specification and qualification of welding procedures for metallic materials -- Qualification based on tested welding consumables ISO 15612:2004 Specification and qualification of welding procedures for metallic materials -- Qualification by adoption of a standard welding procedure ISO 15613:2004 Specification and qualification of welding procedures for metallic materials -- Qualification based on pre-production welding test ISO 14373:2006 Resistance welding -- Procedure for spot welding of uncoated and coated low carbon steels ISO 15614-1:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys ISO 15614-1:2004/Cor 1:2005 ISO 15614-2:2005 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 2: Arc welding of aluminium and its alloys ISO 15614-2:2005/Cor 1:2005 ISO 15614-4:2005 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 4: Finishing welding of aluminium castings ISO 15614-5:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 5: Arc welding of titanium, zirconium and their alloys ISO 15614-6:2006 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 6: Arc and gas welding of copper and its alloys ISO 15614-8:2002 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 8: Welding of tubes to tube-plate joints ISO 15614-10:2005 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 10: Hyperbaric dry welding

Sub. Seksi Program dan Pelaksanaan Teknis, 65 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 11: Electron and laser beam welding ISO 15614-12:2004 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 12: Spot, seam and projection welding ISO 15614-13:2005 Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 13: Resistance butt and flash welding ISO/TR 17671-5:2004 Welding -- Recommendations for welding of metallic materials -- Part 5: Welding of clad steels ISO/TR 17671-6:2005 Welding -- Recommendations for welding of metallic materials -- Part 6: Laser beam welding ISO/TR 17671-7:2004 Welding -- Recommendations for welding of metallic materials -- Part 7: Electron beam welding ISO 4136:2001 Destructive tests on welds in metallic materials -- Transverse tensile test ISO 5173:2000 Destructive tests on welds in metallic materials -- Bend tests ISO 5178:2001 Destructive tests on welds in metallic materials -- Longitudinal tensile test on weld metal in fusion welded joints ISO 7963:2006 Non-destructive testing -- Ultrasonic testing --- Specification for calibration block No. 2 ISO 8249:2000 Welding -- Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals ISO 9015-1:2001 Destructive tests on welds in metallic materials -- Hardness testing -- Part 1: Hardness test on arc welded joints ISO 2553:1992 Welded, brazed and soldered joints -- Symbolic representation on drawings ISO 3690:2000 Welding and allied processes -- Determination of hydrogen content in ferritic steel arc weld metal ISO 5817:2003 Welding -- Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) -Quality levels for imperfections ISO 5817:2003/Cor 1:2006 ISO 9015-2:2003 Destructive tests on welds in metallic materials -- Hardness testing -- Part 2: Microhardness testing of welded joints ISO 9016:2001 Destructive tests on welds in metallic materials -- Impact tests -- Test specimen location, notch orientation and examination ISO 9017:2001 Destructive tests on welds in metallic materials -- Fracture test ISO 9018:2003 Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints

Sub. Seksi Program dan Pelaksanaan Teknis, 66 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 9692-1:2003 Welding and allied processes -- Recommendations for joint preparation -- Part 1: Manual metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam welding of steels ISO 9692-4:2003 Welding and allied processes -- Recommendations for joint preparation -- Part 4: Clad steels ISO 9764:1989 Electric resistance and induction welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal imperfections ISO 9765:1990 Submerged arc-welded steel tubes for pressure purposes -- Ultrasonic testing of the weld seam for the detection of longitudinal and/or transverse imperfections ISO 10042:2005 Welding -- Arc-welded joints in aluminium and its alloys -- Quality levels for imperfections ISO 10042:2005/Cor 1:2006 ISO 10447:2006 Resistance welding -- Peel and chisel testing of resistance spot and projection welds ISO 12096:1996 Submerged arc-welded arc welded steel tubes for pressure purposes -- Radiographic testing of the weld seam for the detection of imperfections ISO 13663:1995 Welded steel tubes for pressure purposes -- Ultrasonic testing of the area adjacent to the weld seam for the detection of laminar imperfections ISO 13919-1:1996 Welding -- Electron and laser-beam welded joints -- Guidance on quality levels for imperfections -Part 1: Steel ISO 13919-2:2001 Welding -- Electron and laser beam welded joints -- Guidance on quality levels for imperfections -Part 2: Aluminium and its weldable alloys ISO 14270:2000 Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds ISO 14271:2000 Vickers hardness testing of resistance spot, projection and seam welds (low load and microhardness) ISO 14272:2000 Specimen dimensions and procedure for cross tension testing resistance spot and embossed projection welds ISO 14273:2000 Specimen dimensions and procedure for shear testing resistance spot, seam and embossed projection welds ISO 14323:2006 Resistance spot welding and projection welds -- Destructive testing of welds -- Specimen dimensions and procedure for impact shear test and cross-tension testing ISO 14324:2003 Resistance spot welding -- Destructive tests of welds -- Method for the fatigue testing of spot welded joints ISO 14329:2003 Resistance welding -- Destructive tests of welds -- Failure types and geometric measurements for resistance spot, seam and projection welds

Sub. Seksi Program dan Pelaksanaan Teknis, 67 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO/TR 16060:2003 Destructive tests on welds in metallic materials -- Etchants for macroscopic and microscopic examination ISO 17635:2003 Non-destructive testing of welds -- General rules for fusion welds in metallic materials ISO 17636:2003 Non-destructive testing of welds -- Radiographic testing of fusion-welded joints ISO 17637:2003 Non-destructive testing of welds -- Visual testing of fusion-welded joints ISO 17638:2003 Non-destructive testing of welds -- Magnetic particle testing ISO 17639:2003 Destructive tests on welds in metallic materials -- Macroscopic and microscopic examination of welds ISO 17640:2005 Non-destructive testing of welds -- Ultrasonic testing of welded joints ISO 17641-1:2004 Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 1: General ISO 17641-2:2005 Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests ISO/TR 17641-3:2005 17641 3:2005 Destructive tests on welds in metallic materials -- Hot cracking tests for weldments -- Arc welding processes -- Part 3: Externally loaded tests ISO 17642-1:2004 Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 1: General ISO 17642-2:2005 Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 2: Self-restraint tests ISO 17642-3:2005 Destructive tests on welds in metallic materials -- Cold cracking tests for weldments -- Arc welding processes -- Part 3: Externally loaded tests ISO 17643:2005 Non-destructive testing of welds -- Eddy current testing of welds by complex-plane analysis ISO 17653:2003 Destructive tests on welds in metallic materials -- Torsion test of resistance spot welds ISO 17654:2003 Destructive tests on welds in metallic materials -- Resistance welding -- Pressure test on resistance seam welds ISO 17655:2003 Destructive tests on welds in metallic materials -- Method for taking samples for delta ferrite measurement ISO 22825:2006 Non-destructive testing of welds -- Ultrasonic testing -- Testing of welds in austenitic steels and nickel-based alloys ISO 22826:2005 Destructive tests on welds in metallic materials -- Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests) ISO 23277:2006 Non-destructive testing of welds -- Penetrant testing of welds -- Acceptance levels ISO 23278:2006 Non-destructive testing of welds -- Magnetic particle testing of welds -- Acceptance levels

Jembatan

Pengujian

Kayu

Sub. Seksi Program dan Pelaksanaan Teknis, 68 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-3399-1994 Metode Pengujian Kuat Tarik Kayu di Laboratorium SNI 03-3400-1994 Metode Pengujian Kuat Geser Kayu di Laboratorium SNI 03-3958-1995 Metode Pengujian Kuat Tekan Kayu di Laboratorium SNI 03-3959-1995 Metode Pengujian Kuat Lentur Kayu di Laboratorium SNI 03-3960-1995 Metode Pengujian Modulus Elastisitas Lentur Kayu di Laboratorium SNI 03-3972-1995 Metode Pengujian Modulus Elastisitas Lentur Kayu Kons-truksi Berukuran Struktural SNI 03-3973-1995 Metode Pengujian Modulus Elastisitas Tekan dan Kuat Tekan Sejajar Serat Kayu Konstruksi Berukuran Struktural SNI 03-3974-1995 Metode Pengujian Modulus Geser Kayu Konstruksi Berukuran Struktural SNI 03-3975-1995 Metode Pengujian Kuat Lentur Kayu Konstruksi Berukuran Struktural SNI 03-6372-2000 Tata Cara Pengkondisian Kelengasan Kayu Dan Bahan Berkayu SNI 03-6448-2000 Metode Pengujian Kuat Tarik Panel Kayu Struktural SNI 03-6840-2002 Metode Pengujian Kuat Cabut Paku Di Laboratorium SNI 03-6841-2002 Metode Pengujian Kuat Belah Kayu Di Laboratorium SNI 03-6842-2002 Metode Pengujian Kekerasan Kayu Di Laboratorium SNI 03-6843-2002 Metode Pengujian Susut Radial Dan Tangensial Kayu Di Laboratorium SNI 03-6844-2002 Metode Pengujian Berat Jenis Kayu dan Bahan dari Kayu dengan cara Pengukuran SNI 03-6845-2002 Metode Pengujian Berat Jenis Kayu Dan Bahan Dari Kayu Dengan Cara Pencelupan Dalam Air Raksa. SNI 03-6846-2002 Metode Pengujian Berat Jenis Kayu Dan Bahan Dari Kayu Dengan Tabung Pengambang. SNI 03-6847-2002 Metode Pengujian Berat Jenis Kayu Dan Bahan Dari Kayu Dengan Cara Pencelupan Dalam Air. SNI 03-6848-2002 Metode Pengujian Berat Jenis Batang Kayu Dan Kayu Struktur Bangunan. SNI 03-6849-2002 Metode pengujian berat jenis serpih kayu SNI 03-6850-2002 Metode pengujian pengukuran kadar air kayu dan bahan berkayu. SNI 03-6851-2002 Metode pengujian lentur panel kayu struktural SNI 03-6881-2002 Tata Cara Evaluasi Besaran Izin Untuk Klasifikasi Mutu kayu Struktural Pd T-05-2004-C Tata cara pemilahan kayu konstruksi secara masinal. Pd T-06-2004-C Pengawetan kayu pada bangunan yang sudah berdiri dengan menggunakan pasak dan pentil injeksi. Pd T-07-2004-C Tata cara pengawetan bambu dengan cara tekanan. EN 1075:1999 Timber structures - Test methods - Joints made with punched metal plate fasteners

Sub. Seksi Program dan Pelaksanaan Teknis, 69 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 12479:2001 Wood poles for overhead lines - Sizes - Methods of measurement and permissible deviations EN 12509:2001 Timber poles for overhead lines - Test methods - Determination of modulus of elasticity, bending strength, density and moisture content EN 12511:2001 Wood poles for overhead lines - Determination of characteristic values EN 12512:2001 Timber structures - Test methods - Cyclic testing of joints made with mechanical fasteners EN 12512:2001/A1:2005 Timber Structures - Test methods - Cyclic testing of joints made with mechanical fasteners EN 13271:2001 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints EN 13271:2001/AC:2003 Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints EN 1380:1999 Timber structures - Test methods - Load bearing nailed joints EN 1381:1999 Timber structures - Test methods - Load bearing stapled joints EN 1382:1999 Timber structures - Test methods - Withdrawal capacity of timber fasteners EN 1383:1999 Timber structures - Test methods - Pull through resistance of timber fasteners EN 14251:2003 Structural round timber - Test methods EN 14358:2006 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample EN 1912:2004 Structural timber - Strength classes - Assignment of visual grades and species EN 28970:1991 Timber structures - Testing of joints made with mechanical fasteners - Requirements for wood density (ISO 8970:1989) EN 380:1993 Timber structures - Test methods - General principles for static load testing EN 383:2007 Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners EN 384:2004 Structural timber - Determination of characteristic values of mechanical properties and density EN 391:2001 Glued laminated timber - Delamination test of glue lines EN 392:1995 Glued laminated timber - Shear test of glue lines EN 408:2003 Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties EN 409:1993 Timber structures - Test methods - Determination of the yield moment of dowel type fasteners - Nails EN 594:1995 Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels

Sub. Seksi Program dan Pelaksanaan Teknis, 70 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 595:1995 Timber structures - Test methods - Test of trusses for the determination of strength and deformation behaviour EN 596:1995 Timber structures - Test methods - Soft body impact test of timber framed walls EN 789:2004 Timber structures - Test methods - Determination of mechanical properties of wood based panels JIS A 9201:1991 JIS A 9301:1976 JIS A 9302:1989 JIS A 9303:1966 JIS A 9304:1976 JIS A 9305:1976

Qualitative standards and testing methods of wood preservatives General rules of testing methods for wood preservatives Method for testing effectiveness of wood preservatives against decay of wood Method for testing effects of wood preservatives on ignition and burning of wood Method for testing the corrosion of iron by wood preservatives Method for testing effects of wood preservatives on hygroscopicity of wood

ISO 8904:1990 Broadleaved sawn timber -- Sizes -- Methods of measurement ISO 8905:1988 Sawn timber -- Test methods -- Determination of ultimate strength in shearing parallel to grain ISO 8906:1988 Sawn timber -- Test methods -- Determination of resistance to local transverse compression ISO 9086-1:1987 Wood -- Methods of physical and mechanical testing -- Vocabulary -- Part 1: General concepts and macrostructure ISO 9709:2005 Structural timber -- Visual strength grading -- Basic principles ISO 13912:2005 Structural timber -- Machine strength grading -- Basic principles ISO 22157-1:2004 Bamboo -- Determination of physical and mechanical properties -- Part 1: Requirements ISO/TR 22157-2:2004 Bamboo -- Determination of physical and mechanical properties -- Part 2: Laboratory manual ISO 3129:1975 Wood -- Sampling methods and general requirements for physical and mechanical tests ISO 3130:1975 Wood -- Determination of moisture content for physical and mechanical tests ISO 3131:1975 Wood -- Determination of density for physical and mechanical tests ISO 3132:1975 Wood -- Testing in compression perpendicular to grain ISO 3133:1975 Wood -- Determination of ultimate strength in static bending ISO 3179:1974 Coniferous sawn timber -- Nominal dimensions ISO 3345:1975 Wood -- Determination of ultimate tensile stress parallel to grain ISO 3346:1975 Wood -- Determination of ultimate tensile stress perpendicular to grain ISO 3347:1976 Wood -- Determination of ultimate shearing stress parallel to grain ISO 3348:1975 Wood -- Determination of impact bending strength

Sub. Seksi Program dan Pelaksanaan Teknis, 71 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 3349:1975 Wood -- Determination of modulus of elasticity in static bending ISO 3350:1975 Wood -- Determination of static hardness ISO 3351:1975 Wood -- Determination of resistance to impact indentation ISO 4469:1981 Wood -- Determination of radial and tangential shrinkage ISO 4470:1981 Sawn timber -- Determination of the average moisture content of a lot ISO 4471:1982 Wood -- Sampling sample trees and logs for determination of physical and mechanical properties of wood in homogeneous stands ISO 4473:1988 Coniferous and broadleaved tree sawlogs -- Visible defects -- Classification ISO 4474:1989 Coniferous and broadleaved tree sawlogs -- Visible defects -- Terms and definitions ISO 4475:1989 Coniferous and broadleaved tree sawlogs -- Visible defects -- Measurement ISO 4476:1983 Coniferous and broadleaved sawlogs -- Sizes -- Vocabulary ISO 4480:1983 Coniferous sawlogs -- Measurement of sizes and determination of volume ISO 4858:1982 Wood -- Determination of volumetric shrinkage ISO 4859:1982 Wood -- Determination of radial and tangential swelling ISO 4860:1982 Wood -- Determination of volumetric swelling ISO 737:1975 Coniferous sawn timber -- Sizes -- Methods of measurement ISO 1030:1975 Coniferous sawn timber -- Defects -- Measurement SO 2301:1973 Sawn timber of broadleaved species -- Defects -- Measurement D1036-99(2005) Standard Test Methods of Static Tests of Wood Poles D1758-06 Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes D1761-06 Standard Test Methods for Mechanical Fasteners in Wood D2017-05 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods D2395-06 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials D2481-05 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens D2555-06 Standard Practice for Establishing Clear Wood Strength Values D3501-05a Standard Test Methods for Wood-Based Structural Panels in Compression D3507-97(2000) Standard Test Methods for Penetration of Preservatives in Wood and for Differentiating Between Heartwood and Sapwood D3535-00 Standard Test Method for Resistance to Deformation Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior (Wet Use) Exposure Conditions D4442-92(2003) Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials D4502-92(2004) Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

Sub. Seksi Program dan Pelaksanaan Teknis, 72 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D4680-98(2004) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood) D4761-05 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material D5266-99(2005) Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints D5652-95(2000) Standard Test Methods for Bolted Connections in Wood and Wood-Base Products D5764-97a(2002) Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Base Products D7247-06 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures D1413-05b Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures D143-94(2000)e1 Standard Test Methods for Small Clear Specimens of Timber D2899-03 D2899 03 Standard Practice for Establishing Allowable Stresses for Round Timber Piles D3200-74(2005) Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles D3737-06 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam) D7199-06 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models D4688-99(2005) Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber D198-05a Standard Test Methods of Static Tests of Lumber in Structural Sizes D6782-05 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

Jembatan

Spesifikasi

Batu Bata SNI 03-0348-1989 Bata beton pejal, Mutu dan cara uji SNI 03-0349-1989 Bata beton untuk pasangan dinding SNI 03-6882-2002 Spesifikasi mortar untuk pekerjaan pasangan AASHTO M 91-95 (2000) Sewer and Manhole Brick (Made from Clay or Shale) AASHTO M 114-03 Building Brick (Solid Masonry Units Made from Clay or Shale) AASHTO T 32-04 Sampling and Testing Brick CEN/TR 15123:2005 Design, preparation and application of internal polymer plastering systems CEN/TR 15124:2005 Design, preparation and application of internal gypsum plastering systems

Sub. Seksi Program dan Pelaksanaan Teknis, 73 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM CEN/TR 15125:2005 Design, preparation and application of internal cement and/or lime plastering systems CEN/TR 15225:2005 Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars CEN/TS 772-22:2006 Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units EN 1015-1:1998 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) EN 1015-1:1998/A1:2006 Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis) EN 1015-10:1999 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar EN 1015-10:1999/A1:2006 Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar EN 1015-11:1999 Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar EN 1015-11:1999/A1:2006 Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar EN 1015-12:2000 Methods of test of mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates EN 1015-17:2000 Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars EN 1015-17:2000/A1:2004 Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars EN 1015-18:2002 Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar EN 1015-19:1998 Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars EN 1015-19:1998/A1:2004 Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars EN 1015-2:1998 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars EN 1015-2:1998/A1:2006 Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars EN 1015-21:2002 Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates

Sub. Seksi Program dan Pelaksanaan Teknis, 74 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 1015-3:1999 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) EN 1015-3:1999/A1:2004 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) EN 1015-3:1999/A2:2006 Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table) EN 1015-4:1998 Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration) EN 1015-6:1998 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar EN 1015-6:1998/A1:2006 Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar EN 1015-7:1998 1015 7:1998 Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar EN 1015-9:1999 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar EN 1015-9:1999/A1:2006 Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar EN 1052-1:1998 Methods of test for masonry - Part 1: Determination of compressive strength EN 1052-2:1999 Methods of test for masonry - Part 2: Determination of flexural strength EN 1052-3:2002 Methods of test for masonry - Part 3: Determination of initial shear strength EN 1052-4:2000 Methods of test for masonry - Part 4: Determination of shear strength including damp proof course EN 1052-5:2005 Methods of test for masonry - Part 5: Determination of bond strength by the bond wrench method EN 13914-1:2005 Design, preparation and application of external rendering and internal plastering - External rendering EN 13914-2:2005 Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering EN 1745:2002 Masonry and masonry products - Methods for determining design thermal values EN 771-1:2003 Specification for masonry units - Part 1: Clay masonry units EN 771-1:2003/A1:2005 Specification for masonry units - Part 1: Clay masonry units EN 771-2:2003 Specification for masonry units - Part 2: Calcium silicate masonry units EN 771-2:2003/A1:2005 Specification for masonry units - Part 2: Calcium silicate masonry units EN 771-3:2003 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates)

Sub. Seksi Program dan Pelaksanaan Teknis, 75 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 771-3:2003/A1:2005 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) EN 771-4:2003 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units

Jembatan

Spesifikasi

Batu Bata

EN 771-4:2003/A1:2005 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units EN 771-5:2003 Specification for masonry units - Part 5: Manufactured stone masonry units EN 771-5:2003/A1:2005 Specification for masonry units - Part 5: Manufactured stone masonry units EN 771-6:2005 Specification for masonry units - Part 6: Natural stone masonry units EN 772-1:2000 Methods of test for masonry units - Part 1: Determination of compressive strength EN 772-10:1999 Methods of test for masonry units - Part 10: Determination of moisture content of calcium silicate and autoclaved aerated concrete units EN 772-11:2000 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units EN 772-11:2000/A1:2004 Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units EN 772-13:2000 Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone) EN 772-14:2001 Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units EN 772-15:2000 Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units EN 772-16:2000 Methods of test for masonry units - Part 16: Determination of dimensions EN 772-16:2000/A1:2004 Methods of test for masonry units - Part 16: Determination of dimensions EN 772-16:2000/A2:2005 Methods of test for masonry units - Part 16: Determination of dimensions EN 772-18:2000 Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units EN 772-19:2000 Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units EN 772-2:1998 Methods of test for masonry units - Part 2: Determination of percentage area of voids in aggregate concrete masonry units (by paper indentation) EN 772-2:1998/A1:2005 Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation) EN 772-20:2000 Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units

Sub. Seksi Program dan Pelaksanaan Teknis, 76 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 772-20:2000/A1:2005 Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units EN 772-3:1998 Methods of test for masonry units - Part 3: Determination of net volume and percentage of voids of clay masonry units by hydrostatic weighing EN 772-4:1998 Methods of test for masonry units - Part 4: Determination of real and bulk density and of total and open porosity for natural stone masonry units EN 772-5:2001 Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units EN 772-6:2001 Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units EN 772-7:1998 Methods of test for masonry units - Part 7: Determination of water absorption of clay masonry damp proof course units by boiling in water EN 772-9:1998 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of calcium silicate masonry units by sand filling EN 772-9:1998/A1:2005 Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling EN 845-1:2003 Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets EN 845-2:2003 Specification for ancillary components for masonry - Part 2: Lintels EN 845-3:2003 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork EN 846-10:2000 Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets EN 846-11:2000 Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels EN 846-13:2001 Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings EN 846-2:2000 Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints EN 846-3:2000 Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement EN 846-4:2001 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps EN 846-4:2001/A1:2004 Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps

Sub. Seksi Program dan Pelaksanaan Teknis, 77 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 846-5:2000 Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test) EN 846-6:2000 Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) EN 846-7:2000 Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar joint connections) EN 846-8:2000 Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers EN 846-8:2000/A1:2006 Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers EN 846-9:2000 Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels EN 998-1:2003 998 1:2003 Specification for mortar for masonry - Part 1: Rendering and plastering mortar EN 998-1:2003/AC:2005 Specification for mortar for masonry - Part 1: Rendering and plastering mortar EN 998-2:2003 Specification for mortar for masonry - Part 2: Masonry mortar C62-05 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale) C73-05 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick) C55-03 Standard Specification for Concrete Brick C67-06 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile C126-99(2005) Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units C456-93(2003) Standard Test Method for Hydration Resistance of Basic Bricks and Shapes C658-98(2003) Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile C723-98(2003) Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile C902-06 Standard Specification for Pedestrian and Light Traffic Paving Brick C1272-05a Standard Specification for Heavy Vehicular Paving Brick

Jembatan

Spesifikasi Konstruksi

Drainase dan Gorong-gorong SNI 06-0084-1987 Pipa PVC untuk saluran air minum, Mutu dan cara uji SNI 06-0135-1987 Sambungan pipa PVC untuk saluran air minum SNI 03-4818-1998 Spesifikasi pipa beton berlubang untuk saluran drainase dalam tanah SNI 03-6367-2000 Spesifikasi pipa beton untuk air buangan, saluran peluapan dan gorong-gorong SNI 03-6368-2000 Spesifikasi pipa beton untuk air limbah,saluran air hujan dan gorong-gorong

Sub. Seksi Program dan Pelaksanaan Teknis, 78 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-6719-2002 Spesifikasi pipa baja bergelombang dengan lapis pelindung logam untuk pembuangan air dan drainase bawah tanah. SNI 03-1742-1989 : Metode Pengujian Kepadatan Ringan Untuk Tanah. SNI 03-1966-1990 : Metode Pengujian Batas Plastis. SNI 03-1967-1990 : Metode Pengujian Batas Cair dengan Alat Casagrande. SNI 03-2828-1992 : Metode Pengujian Kepadatan Lapangan dengan Alat Konus Pasir. SNI 03-3423-1994 : Metode Pengujian Analisis Ukuran Butir Tanah Dengan Alat Hidrometer. AASHTO M 36-03 Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains AASHTO M 86-98 (2002) Concrete Sewer, Storm Drain, and Culvert Pipe AASHTO M 86M-98 (2002) Concrete Sewer, Storm Drain, and Culvert Pipe [Metric] AASHTO M 167M/ M 167-04 Corrugated Steel Structural Plate, Zinc-Coated,for Field-Bolted Pipe, Pipe-Arches, and Arches AASHTO M 170M-04 170M 04 Reinforced Concrete Culvert Culvert, Storm Drain Drain, and Sewer Pipe [Metric] AASHTO M 175M-97 (2001) Perforated Concrete Pipe [Metric] AASHTO M 176M-98 (2002) Porous Concrete Pipe [Metric] AASHTO M 178M-95 (2003) Concrete Drain Tile [Metric] AASHTO M 190-04 Bituminous-Coated Corrugated Metal Culvert Pipe AASHTO M 196-92 (2000) Corrugated Aluminum Pipe for Sewers and Drains AASHTO M 197-01 Aluminum Alloy Sheet for Corrugated Aluminum Pipe AASHTO M 198-03 Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants AASHTO M 199-04 Precast Reinforced Concrete Manhole AASHTO M 206M-04 Reinforced Concrete Arch Culvert, Storm Drain,and Sewer Pipe [Metric] AASHTO M 207M-04 Reinforced Concrete Elliptical Culvert, Storm Drain,and Sewer Pipe [Metric] AASHTO M 218-03 Steel Sheet, Zinc-Coated (Galvanized), for Corrugated Steel Pipe AASHTO M 219-92 (2000) Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches AASHTO Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric] AASHTO M 243-96 (2000) Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches , AASHTO M 245-00 Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains AASHTO M 246-00 Steel Sheet, Metallic-Coated and Polymer-Precoated for Corrugated Steel Pipe AASHTO M 252-02 Corrugated Polyethylene Drainage Pipe AASHTO M 259-98 (2002) Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers

Sub. Seksi Program dan Pelaksanaan Teknis, 79 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO M 259M-00 Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] AASHTO M 262-04 Concrete Pipe and Related Products AASHTO M 264-03 Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping AASHTO M 273M-00 Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 06 m of Cover Subjected to Highway Loadings [Metric] AASHTO M 274-87 (2000) Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe AASHTO M 278-02 Class PS46 Poly(Vinyl Chloride) (PVC) Pipe AASHTO M 278-1 M 289-91 (2000) Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe AASHTO M 294-04 Corrugated Polyethylene Pipe, 300- to 1500-mm Diameter AASHTO M 304-03 Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter AASHTO M 306-04 306 04 Drainage, Sewer, Utility, and Related Castings AASHTO M 315M-04 Joints for Circular Concrete Sewer and Culvert Pipe,Using Rubber Gaskets [Metric] AASHTO T 241-95 (2000) Helical Continuously Welded Seam Corrugated Steel Pipe AASHTO T 249-03 Helical Lock Seam Corrugated Pipe AASHTO T 280-00 Concrete Pipe, Manhole Sections or Tile AASHTO T 281-99 (2003) Vitrified Clay Pipe ISO 559:1991 Steel tubes for water and sewage ISO 3114:1977 Unplasticized polyvinyl chloride (PVC) pipes for potable water supply -- Extractability of lead and tin -Test method ISO/TR 4191:1989 Unplasticized polyvinyl chloride (PVC-U) pipes for water supply -- Recommended practice for laying ISO 4422-1:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -Specifications -- Part 1: General ISO 4422-2:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -Specifications -- Part 2: Pipes (with or without integral sockets) ISO 4422-3:1996 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -Specifications -- Part 3: Fittings and joints ISO 4422-4:1997 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -Specifications -- Part 4: Valves and ancillary equipment ISO 4422-5:1997 Pipes and fittings made of unplasticized poly(vinyl chloride) (PVC-U) for water supply -Specifications -- Part 5: Fitness for purpose of the system

Sub. Seksi Program dan Pelaksanaan Teknis, 80 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 4427:1996 Polyethylene (PE) pipes for water supply -- Specifications ISO 6992:1986 Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply -- Extractability of cadmium and mercury occurring as impurities ISO 8795:2001 Plastics piping systems for the transport of water intended for human consumption -- Migration assessment -- Determination of migration values of plastics pipes and fittings and their joints ISO 9349:2004 Preinsulated ductile iron pipeline systems ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin ISO 21004:2006 Plastics piping systems -- Multilayer pipes and their joints, based on thermoplastics, for water supply ISO 22391-1:2007 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General ISO 22391-2:2007 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) (PE RT) -- Part 2: Pipes ISO 22391-3:2007 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings ISO 22391-5:2007 Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system ISO 4435:2003 Plastics piping systems for non-pressure underground drainage and sewerage -- Unplasticized poly(vinyl chloride) (PVC-U) ISO/TR 7073:1988 Recommended techniques for the installation of unplasticized poly(vinyl chloride) (PVC-U) buried drains and sewers ISO/TR 7074:1986 Performance requirements for plastics pipes and fittings for use in underground drainage and sewage ISO 7186:1996 Ductile iron products for sewage applications ISO 8772:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polyethylene (PE) ISO 8773:2006 Plastics piping systems for non-pressure underground drainage and sewerage -- Polypropylene (PP) ISO 10467:2004 Plastics piping systems for pressure and non-pressure drainage and sewerage -- Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin A716-03 Standard Specification for Ductile Iron Culvert Pipe A742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe A746-03 Standard Specification for Ductile Iron Gravity Sewer Pipe

Sub. Seksi Program dan Pelaksanaan Teknis, 81 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains A796/A796M-06 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications A798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications A807/A807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications A865/A865M-06 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints A849-00(2005) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe A862/A862M-98(2003) A862/A862M 98(2003) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe A888-07 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe A930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits A1031-05 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled A1042/A1042M-04 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains A964/A964M-03 Standard Specification for Corrugated Steel Box Culverts A998/A998M-98(2003) Standard Practice for Structural Design of Reinforcements for Fittings in Factory—Made Corrugated Steel Pipe for Sewers and Other Applications A761/A761M-04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches A742/A742M-03 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe A760/A760M-06 Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains A762/A762M-00 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains A796/A796M-06 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

Sub. Seksi Program dan Pelaksanaan Teknis, 82 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM A798/A798M-01 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications A807/A807M-02e1 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications A849-00(2005) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe A862/A862M-98(2003) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe A926-03 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe A929/A929M-01 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe A930-03 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits A1042/A1042M-04 Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains A964/A964M-03 Standard Specification for Corrugated Steel Box Culverts A979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field F679-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings F794-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter F949-06a Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings F1668-96(2002) Standard Guide for Construction Procedures for Buried Plastic Pipe F1504-02 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation F585-94(2000) Standard Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers F894-06 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe F1675-03 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits F1741-05 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits F1867-06 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

Sub. Seksi Program dan Pelaksanaan Teknis, 83 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM F1871-02e1 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation F1947-04 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits F1962-05 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings F2510/F2510M-06 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes F1142-98(2003) Standard Specification for Manhole Cover Assembly Bolted, Semi-Flush, Oiltight and Watertight F1143-98(2003) Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight F1144-98(2003) Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged F758-95(2000) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage F2304-03 Standard Practice for Rehabilitation of Sewers Using Chemical Grouting B745/B745M-97(2005) Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains B788/B788M-04 Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe B789/B789M-99(2005) Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers B790/B790M-00(2006) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits B306-02 Standard Specification for Copper Drainage Tube (DWV)

C139-05 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes C32-05 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale) C443-05a Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets C443M-05a Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets [Metric] C478-06b Standard Specification for Precast Reinforced Concrete Manhole Sections C478M-06b Standard Specification for Precast Reinforced Concrete Manhole Sections [Metric] C497-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

Sub. Seksi Program dan Pelaksanaan Teknis, 84 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C497M-05 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric] C877-02e1 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections C877M-02e1 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections [Metric] C923-02 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes and Laterals C923M-02 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals [Metric] C990-06 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants C990M-06 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants [Metric] C4-04e1 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile C14-05a Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe C14M-05a Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe [Metric] C76M-05b Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] C76-06 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe C118-05a Standard Specification for Concrete Pipe for Irrigation or Drainage C118M-05a Standard Specification for Concrete Pipe for Irrigation or Drainage [Metric] C412-05a Standard Specification for Concrete Drain Tile C412M-05a Standard Specification for Concrete Drain Tile [Metric] C506-05a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe C506M-05a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe [Metric] C507-05a Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe C507M-05b Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe [Metric] C508-00(2004) Standard Specification for Asbestos-Cement Underdrain Pipe C655-04e1 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe C655M-04e1 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe [Metric] C663-98(2003)e2 Standard Specification for Asbestos-Cement Storm Drain Pipe

Sub. Seksi Program dan Pelaksanaan Teknis, 85 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C985-04e1 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe C985M-04e1 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe [Metric] C1053-00(2005) Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications C1119-90(2004)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes C1417-04 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design C1417M-04 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) C1433M-06 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] C1433-06 C1433 06 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts Culverts, Storm Drains Drains, and Sewers C1440-03 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems C1447/C1447M-04e1 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe C1450/C1450M-04 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe C1461-06 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use C1478-06 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals C1478M-03(2006) Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals [Metric] C1479-01 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations C1504-04e1 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains C1504M-04e1 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts, Storm Drains (Metric) C1563-04 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications C1577-06 Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

Sub. Seksi Program dan Pelaksanaan Teknis, 86 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C425-04 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings C505-05a Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints C505M-05a Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints [Metric] C1103-03 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines C1103M-03 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] C1208/C1208M-04 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels C1628-06 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets C12-06 Standard Practice for Installing Vitrified Clay Pipe Lines C301-04 C301 04 Standard Test Methods for Vitrified Clay Pipe C361M-05 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe [Metric] C444M-03 Standard Specification for Perforated Concrete Pipe [Metric] C654M-05a Standard Specification for Porous Concrete Pipe [Metric] C700-05 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated C822-06 Standard Terminology Relating to Concrete Pipe and Related Products C828-06 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines C924M-02 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric) C969M-02 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] C1214M-02 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method [Metric] C1644-06 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes C857-95(2001) Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures C858-83(2004) Standard Specification for Underground Precast Concrete Utility Structures C890-06 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures C891-90(2003) Standard Practice for Installation of Underground Precast Concrete Utility Structures C913-02 Standard Specification for Precast Concrete Water and Wastewater Structures

Sub. Seksi Program dan Pelaksanaan Teknis, 87 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C969-02 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines C969M-02 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines [Metric] C1037-85(2002) Standard Practice for Inspection of Underground Precast Concrete Utility Structures C1131-95(2000) Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems D2680-01 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping D2729-03 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings D3034-06 D3034 06 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings D3262-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe D3754-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe D5813-04 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems D5926-04 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems D3212-96a(2003)e1 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals D6783-05 Standard Specification for Polymer Concrete Pipe

Jembatan

Spesifikasi Konstruksi

TIMBUNAN Manual Pelaksanaan Jalan Pendekat SNI 03-6720.1-2002 Geotekstil – Bagian 1: Tata cara pemasangan geotekstil sebagai filter dan transisi dalam bendungan urugan SNI 03-6720.2-2002 Geotekstil - Bagian 2: Tata cara pengukuran diameter lubang dan permeabilitas geotekstil sebagai filter dan transisi dalam bendungan urugan. SNI 03-6720.3-2002 Geotekstil - Bagian 3: Tata cara desain geotekstil sebagai filter dan transisi dalam bendungan urugan.

Sub. Seksi Program dan Pelaksanaan Teknis, 88 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM CEN/TR 15019:2005 Geotextiles and geotextile-related products - On-site quality control CEN/TS 14416:2005 Geosynthetic barriers - Test method for determining the resistance to roots CEN/TS 14417:2005 Geosynthetic barriers - Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers CEN/TS 14418:2005 Geosynthetic barriers - Test method for the determination of the influence of freezing-thawing cycles on the permeability of clay geosynthetic barriers CR ISO 13434:1998 Guidelines on durability of geotextiles and geotextile-related products EN 12224:2000 Geotextiles and geotextile-related products - Determination of the resistance to weathering EN 12225:2000 Geotextiles and geotextile-related products - Method for determining the microbiological resistance by a soil burial test EN 12226:2000 Geotextiles and geotextile-related products - General tests for evaluation following durability testing EN 12447:2001 Geotextiles and geotextile-related geotextile related products - Screening test method for determining the resistance to hydrolysis in water EN 13249:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) EN 13249:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in the construction of roads and other trafficked areas EN 13250:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways EN 13250:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in the construction of railways EN 13251:2000 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures EN 13251:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in earthworks, foundations and retaining structures EN 13252:2000 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems EN 13252:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in drainage systems EN 13253:2000 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments) EN 13253:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in external erosion control systems

Sub. Seksi Program dan Pelaksanaan Teknis, 89 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 13254:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams EN 13254:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in the construction of reservoirs and dams EN 13254:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of reservoirs and dams EN 13255:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals EN 13255:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in the construction of canals EN 13255:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals EN 13256:2000 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures EN 13256:2000/A1:2005 Geotextiles and geotextile-related products - Required characteristics for use in the construction of tunnels and underground structures EN 13256:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures EN 13257:2000 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals EN 13257:2000/A1:2005 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals EN 13257:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals EN 13265:2000 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects EN 13265:2000/A1:2005 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects EN 13265:2000/AC:2003 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects EN 13361:2004 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams EN 13361:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams EN 13362:2005 Geosynthetic Barriers - Characteristics required for use in the construction of canals

Sub. Seksi Program dan Pelaksanaan Teknis, 90 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 13491:2004 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures EN 13491:2004/A1:2006 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures EN 13492:2004 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment EN 13492:2004/A1:2006 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment EN 13493:2005 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites EN 13562:2000 Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) EN 13719:2002 Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers EN 13719:2002/AC:2005 Geotextiles and geotextile-related products - Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers EN 13738:2004 Geotextiles and geotextile-related products - Determination of pullout resistance in soil EN 14030:2001 Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) EN 14030:2001/A1:2003 Geotextiles and geotextile-related products - Screening test method for determining the resistance to acid and alkaline liquids (ISO/TR 12960:1998, modified) EN 14150:2006 Geosynthetic barriers - Determination of permeability to liquids EN 14196:2003 Geosynthetics - Test methods for measuring mass per unit area of clay geosynthetic barriers EN 14414:2004 Geosynthetics - Screening test method for determining chemical resistance for landfill applications EN 14415:2004 Geosynthetic barriers - Test method for determining the resistance to leaching EN 14574:2004 Geosynthetics - Determination of the pyramid puncture resistance of supported geosynthetics EN 14575:2005 Geosynthetic barriers - Screening test method for determining the resistance to oxidation EN 14576:2005 Geosynthetics - Test method for determining the resistance of polymeric geosynthetic barriers to environmental stress cracking EN 1897:2001 Geotextiles and geotextile-related products - Determination of the compressive creep properties EN ISO 10318:2005 Geosynthetics - Terms and definitions (ISO 10318:2005) EN ISO 10319:1996 Geotextiles - Wide-width tensile test (ISO 10319:1993)

Sub. Seksi Program dan Pelaksanaan Teknis, 91 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN ISO 10320:1999 Geotextiles and geotextile-related products - Identification on site (ISO 10320:1999) EN ISO 10321:1996 Geotextiles - Tensile test for joints/seams by wide-width method (ISO 10321:1992) EN ISO 11058:1999 Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999) EN ISO 12236:2006 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) EN ISO 12956:1999 Geotextiles and geotextile-related products - Determination of the characteristic opening size (ISO 12956:1999) EN ISO 12957-1:2005 Geosynthetics - Determination of friction characteristics - Part 1: Direct shear test (ISO 129571:2005) EN ISO 12957-2:2005 Geosynthetics - Determination of friction characteristics - Part 2: Inclined plane test (ISO 12957-2:2005) EN ISO 12958:1999 Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:1999) EN ISO 13426-1:2003 13426 1:2003 Geotextiles and geotextile-related geotextile related products - Strength of internal structural junctions - Part 1: Geocells (ISO 13426-1:2003) EN ISO 13426-2:2005 Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2005) EN ISO 13427:1998 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998) EN ISO 13428:2005 Geosynthetics - Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005) EN ISO 13431:1999 Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:1999) EN ISO 13433:2006 Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) EN ISO 13437:1998 Geotextiles and geotextile-related products - Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998) EN ISO 13438:2004 Geotextiles and geotextile-related products - Screening test method for determining the resistance to oxidation (ISO 13438:2004) EN ISO 9862:2005 Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) EN ISO 9863-1:2005 Geosynthetics - Determination of thickness at specified pressures - Part 1: Single layers (ISO 9863-1:2005) EN ISO 9863-2:1996 Geotextiles and geotextile-related products - Determination of thickness at specified pressures Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996) EN ISO 9864:2005 Geosynthetics - Test method for the determination of mass per unit area of geotextiles and geotextile-related products (ISO 9864:2005)

Sub. Seksi Program dan Pelaksanaan Teknis, 92 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ENV ISO 10722-1:1998 Geotextiles and geotextile-related products - Procedure for simulating damage during installation - Part 1: Installation in granular materials (ISO 10722-1:1998)

Jembatan

Spesifikasi Konstruksi

BETON SNI 03-6880-2002 Spesifikasi beton struktural SNI 03-0445-1989 Pipa beton tanpa tulangan SNI 03-2914-1992 Spesifikasi Beton Bertulang Kedap Air SNI 03-2460-1991 Spesifikasi Abu Terbang Sebagai Bahan Tambahan Untuk Campuran Beton SNI 03-2495-1991 Spesifikasi Bahan Tambahan Untuk Beton SNI 03-2496-1991 Spesifikasi Bahan Tambahan Pembentuk Gelembung Udara Untuk Beton SNI 03-2442-1991 Kurb beton untuk jalan, Spesifikasi SNI 03-2461-2002 Spesifikasi agregat ringan untuk beton ringan struktural SNI 03 03-2834-2000 2834 2000 Tata cara pembuatan rencana campuran beton normal SNI 03-2854-1992 Spesifikasi kadar ion klorida dalam beton SNI 03-2914-1992 Beton bertulang kedap air, Spesifikasi SNI 03-2915-2002 Spesifikasi beton tahan sulfat SNI 03-3122-1992 Panel beton ringan berserat SNI 03-3984-1995 Spesifikasi Agregat Ringan Untuk Beton isolasi SNI 03-3445-1994 Panel beton ringan berserat, Tata cara pemasangan SNI 03-3449-2002 Tata cara perancangan campuran beton ringan dengan agregat ringan SNI 03-3456-1994 Bahan elastis perapat celah sambungan, Spesifikasi SNI 03-3976-1995 Tata cara pengadukan dan pengecoran beton SNI 03-4817-1998 Spesifikasi lembaran bahan penutup untuk perawatan beton SNI 03-4817-1998 Spesifikasi lembaran bahan penutup untuk perawatan beton SNI 03-6385-2000 Spesifikasi terak besi tanur tinggi granular untuk digunakan dalam beton dan mortar SNI 03-6468-2000 Tata cara perencanaan campuran beton berkekuatan tinggi dengan semen portland dan abu terbang SNI 03-6418-2000 Spesifikasi pengencer graut untuk beton dengan agregat praletak SNI 03-4433-1997 Spesifikasi beton siap pakai SNI 15-0302-1994 Semen portland pozolan SNI 15-2049-1994 Semen portland SNI 03-6811-2002 Spesifikasi bahan pencampur untuk beton semprot. Pt T-07-2002-B Tata cara pelaksanaan beton padat giling (BPG) Pt-T-05-2000-C Tata Cara Pengerjaan Beton di Lapangan

Sub. Seksi Program dan Pelaksanaan Teknis, 93 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM Manual Pelaksanaan Pengecoran Beton AASHTO M 148-01Liquid Membrane-Forming Compounds for Curing Concrete AASHTO M 154-00 Air-Entraining Admixtures for Concrete AASHTO M 157-97 (2001) Ready-Mixed Concrete AASHTO M 171-00 Sheet Materials for Curing Concrete AASHTO M 182-91 (2000) Burlap Cloth Made from Jute or Kenaf AASHTO M 194-00 Chemical Admixtures for Concrete AASHTO M 205-97 (2001) Molds for Forming Concrete Test Cylinders Vertically AASHTO M 210-03 Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete AASHTO M 224-91 (2000) Use of Protective Sealers for Portland Cement Concrete AASHTO M 233-86 233 86 (2000) Boiled Linseed Oil Mixture for Treatment of Portland Cement Concrete AASHTO M 241-97 (2001) Concrete Made by Volumetric Batching and Continuous Mixing Caltrans – BRIDGE DECK CONSTRUCTION MANUAL EN - CR 13901:2000 The use of the concept of concrete families for the production and conformity control of concrete EN - CR 1901:1995 Regional Specifications and Recommendations for the avoidance of damaging alkali silica reactions in concrete EN 14889-1:2006 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity EN 14889-2:2006 Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity EN 15167-1:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation EN 206-1:2000 Concrete - Part 1: Specification, performance, production and conformity EN 206-1:2000/A1:2004 Concrete - Part 1: Specification performance, production and conformity EN 206-1:2000/A2:2005 Concrete - Part 1: Specification performance, production and conformity ENV 13670-1:2000 Execution of concrete structures - Part 1: Common CR 13962:2000 Guidelines for the application of LAC-components in structures EN 1520:2002 Prefabricated reinforced components of lightweight aggregate concrete with open structure EN 1520:2002/AC:2003 Prefabricated reinforced components of lightweight aggregate concrete with open structure

Sub. Seksi Program dan Pelaksanaan Teknis, 94 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM JIS A 7201:1999 Standard practice for execution of spun concrete piles JIS TS A 0006:2004 Concrete using recycled aggregate A820/A820M-06 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete C94/C94M-06 Standard Specification for Ready-Mixed Concrete C171-03 Standard Specification for Sheet Materials for Curing Concrete C260-06 Standard Specification for Air-Entraining Admixtures for Concrete C309-06 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete C332-99 Standard Specification for Lightweight Aggregates for Insulating Concrete C494/C494M-05a Standard Specification for Chemical Admixtures for Concrete C685/C685M-01 Standard Specification for Concrete Made By Volumetric Batching and Continuous Mixing C869-91(2006) Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete C928-05 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs C1315-06 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete C1452-00(2006) Standard Specification for Reinforced Autoclaved Aerated Concrete Elements C1582/C1582M-04 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete C1602/C1602M-06 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete C1619-05 Standard Specification for Elastomeric Seals for Joining Concrete Structures ACI 201.2R-01: Guide to Durable Concrete C-24: Durable Concrete C-34: Bridge Durability and Performance SP-139: Durable Concrete in Hot Climates SP-191: Water-Cement Ratio and Other Durability Parameters 207.1R-05: Guide to Mass Concrete 207.2R-95: Effect of Restraint, Volume Change, and Reinforcement on Cracking of Mass Concrete (Reapproved 2002) 207.3R-94: Practices for Evaluation of Concrete in Existing Massive Structures for Service Conditions

Sub. Seksi Program dan Pelaksanaan Teknis, 95 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM 207.4R-05: Cooling and Insulating Systems for Mass Concrete 209.1R-05: Guide to Factors Affecting Shrinkage and Creep of Hardened Concrete 209R-92: Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures (Reapproved 1997) 210.1R-94: Compendium of Case Histories on Repair of Erosion-Damaged Concrete in Hydraulic Structures (Reapproved 1999) 210R-93: Erosion of Concrete in Hydraulic Structures (Reapproved 1998) 211.1-91: Standard Practice for Selecting Proportions for Normal, Heavyweight and Mass Concrete (Reapproved 2002) 211.2-98: Standard Practice for Selecting Proportions for Structural Lightweight Concrete (Reapproved 2004) 211.3R-02: Guide for Selecting Proportions for No-Slump Concrete 211.5R-01: Guide for Submittal of Concrete Proportions 211PACK: Proportioning Package 213R-03: Guide for Structural Lightweight-Aggregate Concrete 221R-96: Guide for Use of Normal Weight and Heavyweight Aggregates in Concrete (Reapproved 2001) 222.1-96: Provisional Standard Test Method for Water-Soluble Chloride Available for Corrosion of Embedded Steel in Morta 223-98: Standard Practice for the Use of Shrinkage-Compensating Concrete 224.1R-93: Causes, Evaluation, and Repair of Cracks in Concrete Structures (Reapproved 1998) 224.2R-92: Cracking of Concrete Members in Direct Tension (Reapproved 2004) 224R-01: Control of Cracking in Concrete Structures 214.4R-03: Guide for Obtaining Cores and Interpreting Compressive Strength Results 214R-02: Evaluation of Strength Test Results of Concrete 228.1R-03: In-Place Methods to Estimate Concrete Strength SP-88: Strength Evaluation of Existing Concrete Bridges 229R-99: Controlled Low-Strength Materials (Reapproved 2005) 301M-05 Metric Specification for Structural Concrete 302.1R-04: Guide for Concrete Floor and Slab Construction 304.1R-92: Guide for Use of Preplaced Aggregate Concrete for Structural & Mass Concrete Applications (Reapproved 2005) 304.2R-96: Placing Concrete by Pumping Methods 304.3R-96: Heavyweight Concrete: Measuring, Mixing Transporting, and Placing (Reapproved 2004) 304.4R-95: Placing Concrete with Belt Conveyors 304.6R-91: Guide for the Use of Volumetric-Measuring and Continuous-Mixing Concrete Equipment (Reapproved 1997)

Sub. Seksi Program dan Pelaksanaan Teknis, 96 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM 304R-00: Guide for Measuring, Mixing, Transporting, and Placing Concrete 305R-99: Hot Weather Concreting 308.1-98: Standard Specification for Curing Concrete 308R-01: Guide to Curing Concrete 309.1R-93: Behavior of Fresh Concrete During Vibration (Reapproved 2005) 309.2R-98: Identification and Control of Visible Effects of Consolidation on Formed Concrete Surfaces (Reapproved 2005) 309R-05: Guide for Consolidation of Concrete SP-96: Consolidation of Concrete 311.4R-05: Guide for Concrete Inspection CP-21: ACI Concrete Construction Special Inspector Reference Package CP-31: Transportation Inspector Reference Package SP-2 (99): ACI Manual of Concrete Inspection (Reapproved 2005) 311.5-04: 311.5 04: Guide for Concrete Plant Inspection and Testing of Ready-Mixed Ready Mixed Concrete EV01: Batching, Mixing, and Transportation of Ready-Mixed Concrete 318-05: Building Code Requirements for Structural Concrete and Commentary 345R-91: Guide for Concrete Highway Bridge Deck Construction (Reapproved 2005) 346-01: Specification for Cast-In-Place Concrete Pipe 355.2-04/355.2R-04: Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary 440R-96: Report on Fiber Reinforced Plastic Reinforcement for Concrete Structures (Reapproved 2002) 544.1R-96: Report on Fiber Reinforced Concrete (Reapproved 2002) 544.2R-89: Measurement of Properties of Fiber Reinforced Concrete (Reapproved 1999) 544.3R-93: Guide for Specifying,Proportioning, Mixing, Placing and Finishing Steel Fiber Reinforced Conc (Reapp 1998) C-27: Steel Fiber Reinforced Concrete C-28: Synthetic and Other Non-Metallic Fiber Reinforcement of Concrete SP-155: Testing of Fiber Reinforced Concrete SP-182: Structural Applications of Fiber Reinforced Concrete 548.2R-93: Guide for Mixing and Placing Sulfur Concrete in Construction (Reapproved 1998) 551.1R-05: Tilt-Up Concrete Construction Guide 551R-92: Tilt-Up Concrete Structures (Reapproved 2003) C-07: Tilt-Up Construction CP-50(07) Tilt-Up Supervisor and Technician Reference Guide 555R-01: Removal and Reuse of Hardened Concrete SP-136: Structural Lightweight Aggregate Concrete Performance SP-218: High Performance Structural Lightweight Concrete

Sub. Seksi Program dan Pelaksanaan Teknis, 97 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM 363R-92: Report on High-Strength Concrete (Reapproved 1997) 441R-96: High Strength Concrete Columns C-17: High Strength Concrete C-32: High Performance Concrete SP-140: High Performance Concrete in Severe Environments SP-167: High-Strength Concrete: An International Perspective SP-186: High-Performance Concrete: Performance and Quality of Concrete Structures SP-189: High-Performance Concrete Research to Practice SP-87: High-Strength Concrete DCCM: Design and Control of Concrete Mixtures CP2689A: Fundamentals of Proportioning Concrete Mixtures Manual of Concrete Practice Online 10 User Manual of Concrete Practice Online 5 User MCP06Pack: 2006 Manual of Concrete Practice-6 Volume Set MCP-1(06) Book Only Manual of Concrete Practice MCP-2(06) Book Only Manual of Concrete Practice MCP-3(06) Book Only Manual of Concrete Practice MCP-4(06) Book Only Manual of Concrete Practice MCP-5(06) Book Only Manual of Concrete Practice MCP-6(06) Book Only Manual of Conc Pract MCPCD06PACK: 2006 Manual of Concrete Practice (MCP) COMBO (CD & HARD COPY) SP15(05): Field Reference Manual: Standard Specifications for Structural Concrete ACI 301-05 with Selected ACI Reference SP-66(04): ACI Detailing Manual-2004 E2-00: Reinforcement for Concrete SP-109: Concrete in Marine Environment SP-65: Performance of Concrete in Marine Environment SP-108: Permeability of Concrete SP-151: Concrete Bridges In Aggressive Environments SP-177: Ettringite, the Sometimes Host of Destruction SP-219: Recycling Concrete and other Materials for Sustainable Development 211PACK: Proportioning Package 309PACK: Consolidation Package CIP: Concrete in Practice

Sub. Seksi Program dan Pelaksanaan Teknis, 98 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ASCE Challenges of Concrete Construction: Composite Materials in Concrete Construction, Volume 1 (Hardcover) Challenges of Concrete Construction: Concrete Floors and Slabs (Hardcover) Challenges of Concrete Construction: Concrete for Extreme Conditions (Hardcover) Challenges of Concrete Construction: Innovations and Developments in Concrete Materials and Construction (Hardcover) Challenges of Concrete Construction: Sustainable Concrete Construction (Hardcover) Admixtures - Enhancing Concrete Performance (Hardcover) Concrete for Transportation Infrastructure (Hardcover) Concrete in Coastal Structures (Hardcover) High Strength Concrete (Softcover) Modern Concrete Materials: Binders, Additions and Admixtures (Hardcover) Controlling Concrete Degredation (Hardcover) Use of Foamed Concrete in Construction (Hardcover) Exploiting Wastes in Concrete (Hardcover)

Jembatan

Spesifikasi Konstruksi

CEN/TR 14862:2004 Precast concrete products - Full-scale testing requirements in standards on precast concrete Beton pracetak products EN 1168:2005 Precast concrete products - Hollow core slabs EN 12794:2005 Precast concrete products - Foundation piles EN 12843:2004 Precast concrete products - Masts and poles EN 13369:2004 Common rules for precast concrete products EN 13747:2005 Precast concrete products - Floor plates for floor systems EN 14650:2005 Precast concrete products - General rules for factory production control of metallic fibered concrete EN 14844:2006 Precast concrete products - Box culverts JIS - TR A 0003:2000 Precast concrete products -- Performance requirements and recommended specification -Part 2: Piles TR A 0004:2000 Precast concrete products -- Performance requirements and recommended specification -- Part 4: Retaining wall TR A 0005:2000 Precast concrete products -- Performance requirements and recommended specification -- Part 5: Culvert

Sub. Seksi Program dan Pelaksanaan Teknis, 99 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM TR A 0009:2001 Precast concrete products -- Performance requirements and recommended specification -- Part 3: Products for road bridges TR A 0010:2001 Precast concrete products -- Performance requirements and recommended specification -- Part 6: Manhole TR A 0011:2001 Precast concrete products -- Performance requirements and recommended specification -- Part 7: Gutters TR A 0012:2001 Precast concrete products -- Performance requirements and recommended specification -- Part 10: Poles JIS A 5305:1994 Reinforced concrete gutters JIS A 5303:1993 Reinforced spun concrete pipes JIS A 5302:1994 Concrete pipes and reinforced concrete pipes JIS A 5306:1999 Concrete curb-gutters and Reinforced concrete curb-gutters JIS A 5307:1999 Concrete curbs JIS A 5308:2003 Ready-mixed concrete JIS A 5309:1995 Prestressed spun concrete poles JIS A 5310:1995 Reinforced spun concrete piles JIS A 5312:1994 Reinforced concrete built-up retaining walls JIS A 5313:1995 Prestressed concrete girders for road bridges JIS A 5316:1991 Prestressed concrete beams for beam bridges JIS A 5317:1996 Reinforced concrete manhole blocks for sewerage works JIS A 5318:1994 Reinforced concrete flumes and Reinforced concrete bench flumes JIS A 5319:1995 Prestressed concrete girders for light load slab bridges JIS A 5320:1990 Reinforced concrete bench flumes JIS A 5321:1994 Reinforced concrete cable troughs JIS A 5322:1993 Reinforced spun-concrete pipes with socket JIS A 5323:1997 Concrete blocks for retaining wall and revetment JIS A 5325:1990 Reinforced concrete sheet piles JIS A 5326:1988 Prestressed concrete sheet piles JIS A 5328:1994 Reinforced concrete built-up culvert blocks JIS A 5329:1991 Pressed concrete sheet piles JIS A 5330:1990 Concrete pipes with socket JIS A 5333:1993 Core type prestressed concrete pipes JIS A 5334:1987 Covers for reinforced concrete gutters JIS A 5335:1987 Pretensioned spun concrete piles JIS A 5336:1979 Posttensioned spun concrete piles

Sub. Seksi Program dan Pelaksanaan Teknis, 100 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM JIS A 5337:1995 Pretensioned spun high strength concrete piles JIS A 5338:1993 Reinforced concrete l-shape retaining walls JIS A 5341:1982 Reinforced spun concrete gutters JIS A 5342:1982 Reinforced spun concrete curb-gutters JIS A 5343:1982 Spun concrete curbs JIS A 5344:1982 Reinforced spun concrete covers for gutters JIS A 5345:2000 Reinforced concrete gutters for roadside JIS A 5346:1988 Reinforced concrete gutter covers for roadside JIS A 5350:1991 Fiberglass reinforced plastic mortar pipes JIS A 5350:1991/AMENDMENT 1:2006 Fiberglass reinforced plastic mortar pipes (Amendment 1) JIS A 5353:1988 Fittings for reinforced spun concrete pipes JIS A 5354:1993 Concrete sheet piles JIS A 5361:2004 Precast concrete products -- General rules for classification, designation and marking JIS A 5362:2004 Precast concrete products -- Required performance and methods of verification JIS A 5363:2004 Precast concrete products -- General rules for methods of performance test JIS A 5364:2004 Precast concrete products -- General rules of materials and product methods JIS A 5365:2004 Precast concrete products -- General rules for method of inspection JIS A 5371:2004 Precast unreinforced concrete products JIS A 5372:2004 Precast reinforced concrete products JIS A 5373:2004 Precast prestressed concrete products JIS A 5390:2001 Plastics spacers for precast concrete JIS A 5412:1995 Prestressed concrete slab (Double-T type) 550.1R-01: Emulating Cast-in-Place Detailing in Precast Concrete Structures 550R-96: Design Recommendations for Precast Concrete Structures (Reapproved 2001)

Jembatan

Spesifikasi Konstruksi

BETON PRATEGANG

Pd T-04-2004-C Tata cara pembuatan dan pelaksanaan beton berkekuatan tinggi Florida DOT – New Directions for Florida Post-Tensioned Bridges Caltrans - PRESTRESS MANUAL A GUIDE FOR FIELD INSPECTION OF CAST-IN-PLACE POST-TENSIONED STRUCTURES

Sub. Seksi Program dan Pelaksanaan Teknis, 101 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Jembatan

Sub Bidang Spesifikasi Konstruksi

Sub-sub bidang Judul NSPM BAJA TULANGAN dan Kabel SNI 07-0040-1987 Kawat baja karbon rendah, Mutu dan cara uji SNI 07-0053-1987 Batang kawat baja karbon rendah SNI 07-0065-2002 Baja tulangan beton hasil canai panas ulang SNI 07-0076-1987 Tali kawat baja SNI 07-0077-1987 Jalinan kawat baja galbani SNI 07-0377-1989 Batang kawat baja karbon untuk cold heading dan cold forging SNI 07-0663-1995 Jaring kawat baja las untuk tulangan beton SNI 07-0821-1989 Kawat baja segi enam, Anyaman SNI 07-0954-1989 Baja tulangan beton dalam bentuk gulungan SNI 07-0954-1989 Baja tulangan beton dalam bentuk gulungan SNI 07-1050-1989 Baja tulangan untuk konstruksi beton pratekan SNI 07-1051-1989 Kawat baja karbon tinggi untuk konstruksi beton pratekan SNI 07-1154-1989 Kawat baja tanpa lapisan bebas tegangan untuk konstruksi beton pratekan, jalinan tujuh SNI 07-1155-1989 Kawat baja tanpa lapisan bebas tegangan untuk konstruksi beton pratekan SNI 07-2052-1997 Baja tulangan beton SNI 07-2052-2002 Baja tulangan beton SNI 07-2226-1991 Jalinan kawat baja karbon tinggi berlapis seng SNI 07-3651.1-1995 Kawat baja beton pratekan. Bagian 1: Persyaratan umum SNI 07-3651.2-1995 Kawat baja beton pratekan. Bagian 2: Kawat tarik dingin SNI 07-3651.3-1995 Baja beton pratekan. Bagian 3: Kawat kuens (quench) dan temper SNI 07-3651.4-1995 Kawat baja beton pratekan. Bagian 4: Pilinan SNI 03-6812-2002 Spesifikasi anyaman kawat baja polos yang dilas untuk tulangan beton SNI 07-6401-2000 Spesifikasi kawat baja dengan proses canai dingin untuk tulangan beton SNI 07-4603-1998 Tulangan kolom praktis jaringan kawat baja las SNI 07-0076-1987 Tali kawat baja SNI 07-0077-1987 Jalinan kawat baja galbani SNI 03-6814-2002 Tata cara pelaksanaan sambungan mekanis untuk tulangan beton. AASHTO M 30-02 Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail AASHTO M 31M/ M 31-03 Deformed and Plain Billet-Steel Bars for Concrete Reinforcement AASHTO M 32M/ M 32-03 Steel Wire, Plain, for Concrete Reinforcement AASHTO M 54M/ M 54-02 Fabricated Deformed Steel Bar Mats for Concrete Reinforcement ,

Sub. Seksi Program dan Pelaksanaan Teknis, 102 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO M 55M/ M 55-03 Steel Welded Wire Reinforcement, Plain, for Concrete AASHTO M 169-02 Steel Bars, Carbon, Cold-Finished, Standard Quality AASHTO M 203M/ M 203-01Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement AASHTO M 204M/ M 204-01 Uncoated Stress-Relieved Steel Wire for Prestressed Concrete AASHTO M 221M/ M 221-03 Steel Welded Wire Reinforcement, Deformed, for Concrete M 221M/ M 221-1 AASHTO M 225M/ M 225-03 Steel Wire, Deformed, for Concrete Reinforcement M 225M/M 225-1 AASHTO M 254-77 (2000) Corrosion-Resistant Coated Dowel Bars , AASHTO M 275M/ M 275-00 Uncoated High-Strength Steel Bar for Prestressing Concrete AASHTO M 284M/ M 284-03 Epoxy-Coated Reinforcing Bars: Materials and CoatingRequirements AASHTO M 317M/ M 317-03 Epoxy-Coated Reinforcing Bars: Handling Requirementsfor Fabrication and Job Site AASHTO M 322M/ M 322-03 Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement ISO 6934-1:1991 Steel for the prestressing of concrete -- Part 1: General requirements ISO 6934-2:1991 Steel for the prestressing of concrete -- Part 2: Cold-drawn wire ISO 6934-3:1991 Steel for the prestressing of concrete -- Part 3: Quenched and tempered wire ISO 6934-4:1991 Steel for the prestressing of concrete -- Part 4: Strand ISO 6934-4:1991/Cor 1:1992 ISO 6934-4:1991/Cor 2:2000 ISO 6934-5:1991 Steel for the prestressing of concrete -- Part 5: Hot-rolled steel bars with or without subsequent processing ISO 6935-1:2007 Steel for the reinforcement of concrete -- Part 1: Plain bars ISO 6935-2:2007 Steel for the reinforcement of concrete -- Part 2: Ribbed bars ISO 6935-3:1992 Steel for the reinforcement of concrete -- Part 3: Welded fabric ISO 6935-3:1992/Cor 1:2000 ISO 10144:1991 Certification scheme for steel bars and wires for the reinforcement of concrete structures ISO 10544:1992 Cold-reduced steel wire for the reinforcement of concrete and the manufacture of welded fabric ISO 11082:1992 Certification scheme for welded fabric for the reinforcement of concrete structures ISO/TR 12662:1997 Certification scheme for prestressing steels ISO 15630-1:2002 Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 1: Reinforcing bars, wire rod and wire ISO 15630-2:2002 Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric

Sub. Seksi Program dan Pelaksanaan Teknis, 103 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 15630-3:2002 Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel ISO 16020:2005 Steel for the reinforcement and prestressing of concrete – Vocabulary ISO 1035-1:1980 Hot-rolled steel bars -- Part 1: Dimensions of round bars ISO 1035-2:1980 Hot-rolled steel bars -- Part 2: Dimensions of square bars ISO 1035-3:1980 Hot-rolled steel bars -- Part 3: Dimensions of flat bars ISO 1035-4:1982 Hot-rolled steel bars -- Part 4: Tolerances ISO 2938:1974 Hollow steel bars for machining ISO 4951-1:2001 High yield strength steel bars and sections -- Part 1: General delivery requirements ISO 4951-2:2001 High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels ISO 4951-3:2001 High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanicallyrolled steels ISO 9443:1991 Heat-treatable Heat treatable and alloy steels -- Surface quality classes for hot-rolled hot rolled round bars and wire rods -Technical delivery conditions ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete ISO 14655:1999 Epoxy-coated strand for the prestressing of concrete ISO 14656:1999 Epoxy powder and sealing material for the coating of steel for the reinforcement of concrete ISO 16120-1:2001 Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements ISO 16120-2:2001 Non-alloy steel wire rod for conversion to wire -- Part 2: Specific requirements for general purpose wire rod ISO 16120-3:2001 Non-alloy steel wire rod for conversion to wire -- Part 3: Specific requirements for rimmed and rimmed-substitute, low-carbon steel wire rod ISO 16120-4:2001 Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications ISO 20723:2004 Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements ASTM A82/A82M-05a Standard Specification for Steel Wire, Plain, for Concrete Reinforcement A184/A184M-06 Standard Specification for Fabricated Deformed Steel Bar Mats for Concrete Reinforcement A185/A185M-06e1 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete A496/A496M-05 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement A497/A497M-06e1 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete

Sub. Seksi Program dan Pelaksanaan Teknis, 104 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM A615/A615M-06a Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement A704/A704M-06 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement A706/A706M-06a Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement A767/A767M-05 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement A884/A884M-06 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement A933/A933M-95(2001) Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement A955/A955M-06a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement A970/A970M-06 A970/A970M 06 Standard Specification for Headed Steel Bars for Concrete Reinforcement A996/A996M-06a Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement A998/A998M-98(2003) Standard Practice for Structural Design of Reinforcements for Fittings in Factory—Made Corrugated Steel Pipe for Sewers and Other Applications A1022/A1022M-06 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement A1035/A1035M-06 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement A1044/A1044M-05 Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete A416/A416M-06 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete A421/A421M-05 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete A648-04a Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe A779/A779M-05 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete A881/A881M-05 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties A882/A882M-04a Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand A886/A886M-05 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

Sub. Seksi Program dan Pelaksanaan Teknis, 105 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM A910/A910M-05 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete A1032-04 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe A775/A775M-06 Standard Specification for Epoxy-Coated Steel Reinforcing Bars A934/A934M-04 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars A722/A722M-06 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete A911/A911M-05 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties A108-03e1 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished A603-98(2003) Standard Specification for Zinc-Coated Steel Structural Wire Rope A899-91(2002) Standard Specification for Steel Wire, Epoxy-Coated A938-04 A938 04 Standard Test Method for Torsion Testing of Wire ACI 423.6/423.6R-01: Specification for Unbonded Single-Strand Tendons and Commentary 439.3R-91: Mechanical Connections of Reinforcing Bars (Reapproved 1999) 440.1R-06: Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars

JIS G 3109:1994 Steel bars for prestressed concrete JIS G 3117:1987 Rerolled steel bars for concrete reinforcement JIS G 3123:2004 Cold finished carbon and alloy steel bars ISO 4951-1:2001 High yield strength steel bars and sections -- Part 1: General delivery requirements ISO 4951-2:2001 High yield strength steel bars and sections -- Part 2: Delivery conditions for normalized, normalized rolled and as-rolled steels ISO 4951-3:2001 High yield strength steel bars and sections -- Part 3: Delivery conditions for thermomechanicallyrolled steels 355.1R-91: Report on Anchorage to Concrete (Reapproved 1997) ACC: Anchorage in Concrete Construction SP-103: Anchorage to Concrete 355.2-04/355.2R-04: Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary SP-130: Anchors in Concrete--Design and Behavior 440.1R-06: Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars

Sub. Seksi Program dan Pelaksanaan Teknis, 106 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Jembatan

Sub Bidang

Spesifikasi Konstruksi

Sub-sub bidang Judul NSPM

BAJA STRUKTUR, Baut&Mur Manual Pelaksanaan Pemasangan Baja Tulangan SNI 03-6764-2002 Spesifikasi Baja Struktural SNI 07-6402-2000 Spesifikasi Tabung Baja Karbon Struktural Berbentuk Bulat dan Lainnya yang Dibentuk Dalam Keadaan Dingin dengan Dilas Tanpa Kampuh SNI 07-6403-2000 Spesifikasi Pelat Baja Karbon dengan Kuat Tarik Rendah dan Medium SNI 07-0242.1-2000 Spesifikasi Pipa Baja yang Dilas dan Tanpa Sambungan dengan Lapis Hitam dan Galvanis Panas SNI 03-6763-2002 Spesifikasi Tabung Baja Karbon Struktural yang Dibentuk Dalam Keadaan Panas dengan Dilas Tanpa Kampuh SNI 07-0310-1989 Pipa baja karbon untuk minyak dan gas, Cara uji mekanis las SNI 07-0039-1987 Pipa baja lapis seng, Mutu dan cara uji SNI 07-0068-1987 Pipa baja karbon untuk konstruksi umum, Mutu dan cara uji SNI 07-0071-1987 Pipa baja las spiral, Mutu dan cara uji Pd-NN34 Buku panduan pipa baja bergelombang SNI 05-0820-1989 Steel slotted angle SNI 07-0040-1987 Kawat baja karbon rendah, Mutu dan cara uji SNI 07-0052-1987 Baja kanal bertepi bulat canai panas, Mutu dan cara uji SNI 07-0053-1987 Batang kawat baja karbon rendah SNI 07-0065-2002 Baja tulangan beton hasil canai panas ulang SNI 07-0066-1987 Baja lembaran lapis seng yang diberi lapisan cat berwarna, Mutu dan cara uji SNI 07-0070-1987 Baja siku sama kaki bertepi bulat canai panas hasil rerolling, Mutu dan cara uji SNI 07-0075-1987 Batang kawat baja karbon rendah untuk kawat inti elektroda las, Mutu dan cara uji SNI 07-0076-1987 Tali kawat baja SNI 07-0077-1987 Jalinan kawat baja galbani SNI 07-0132-1987 Baja lembaran lapis seng tahan lipat SNI 07-0722-1989 Baja canai panas untuk konstruksi umum SNI 07-2610-1992 Baja profil H hasil pengelasan dengan filter untuk konstruksi umum SNI 07-2610-1992 Baja profil H hasil pengelasan dengan filter untuk konstruksi umum SNI 07-3015-1992 Baja canai panas untuk konstruksi dengan pengelasan

Sub. Seksi Program dan Pelaksanaan Teknis, 107 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 07-3016-1992 Baja canai panas untuk konstruksi dengan pengelasan, Komposisi kimia dan sifat mekanis SNI 05-0541-1992 Mur dan baud kepala segi enam untuk konstruksi umum dan jembatan SNI 05-0571-1989/1991 Mur dan baud, Cara uji mekanis / Metode tes mekanis fastener - baut,sekrup dan baut tanam SNI 05-1041-1989 Sifat mekanis baut baja SNI 05-1042-1989 Sifat mekanis mur baja SNI 05-1599-1989 Pengencang - Produk segi enam - Lebar kunci SNI 05-1603-1992 Sekrup kepala segi enam, Kualitas produk A dan B SNI 05-1604-1992 Sekrup kepala segi enam, kualitas produk C SNI 05-1605-1989 Toleransi pengencang - Bagian II: Baut, sekrup dan mur berdiameter ulir 1 sampai dengan 3 mm dengan kualitas produk F SNI 05-1606-1989 Toleransi pengencang - Bagian III: Cincin untuk baut metrik, sekrup dan mur dengan diameter ulir 1 sampai dengan 50 mm mm, Kualitas produk A dan C SNI 05-1785-1990 Baud dan dudukan kepala baud, Diameter lubang SNI 05-1888-1990 Pengencang, Toleransi. Bagian I : Baud, sekrup dan mur berdiameter ulir 1,6 sampai dengan 150 mm, dengan kualitas produk A,B dan C SNI 05-1890-1990 Pengencang - Batas pengeratan tangki (under cut) ulir luas metrik SNI 05-1891-1990 Pengencang - Baut, sekrup, dan baut tanam - Lubang pena belah dan lubang kawat SNI 05-1892-1990 Pengencang - Ujung pengencang berulir luas metrik SNI 04-1931-1990 Rencana dan prosedur pengambilan contoh untuk inspeksi barang SNI 05-2061-1990 Pengencang - Lubang longgar untuk baut dan sekrup SNI 05-2248-1991 Baut, sekerup, Baut tanam, dan mur, Persyaratan umum SNI 05-2662-1992 Fastener - Mur ulir halus dengan nilai beban uji tertentu, Sifat mekanis SNI 05-2924-1992 Ulir sekrup metrik untuk keperluan umum - Ukuran terpilih untuk sekrup, baut dan mur SNI 05-2933-1992 Ulir metrik halus. Batas ukuran dan toleransi SNI 05-2934-1992 Ulir metrik kasar. Batas ukuran dan toleransi SNI 05-2935-1992 Ulir sekrup unified kasar. Batas ukuran dan toleransi SNI 05-3063-1992 Baut kepala segi enam - Kelas B dengan diameter batang sama dengan diameter pits SNI 05-3064-1992 Baut kepala segi enam - Kelas C SNI 05-3065-1992 Baut kepala segi enam untuk konstruksi dengan kekuatan tinggi, mempunyai ukuran lebar kunci besar dan panjang ulir metrik nominal - Kelas C untuk tingkat 8.8 dan 10.9 SNI 05-3067-1992 Baut kepala segi enam dengan ulir metrik halus - Kelas A danB SNI 05-3068-1992 Mur segi enam bentuk 1 - Kelas A dan B SNI 05-3069-1992 Mur segi enam bentuk 2 - Kelas A dan B SNI 05-3070-1992 Mur segi enam - Kelas C

Sub. Seksi Program dan Pelaksanaan Teknis, 108 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 05-3215-1992 Sifat-sifat mekanis dari pengikat. Mur dengan harga spesifikasi beban yang diizinkan SNI 05-3216-1992 Sifat-sifat mekanis dari pengikat. Mur dengan harga spesifikasi beban yang diizinkan, tinggi efektif ulir 0,4 d sampai dengan 0,6 d SNI 05-3214-1992 Sifat-sifat mekanis pengikat. Baut, sekrup dan stud SNI 05-3217-1992 Mur baja pengunci segi enam tahan torsi. Sifat-sifat mekanis dan kemampuannya SNI 05-3218-1992 Mur baja pengunci segi enam tahan torsi. Dimensi seri metris SNI 05-3219-1992 Mur baja pengunci segi enam tahan torsi. Dimensi seri inci SNI 05-3220-1992 Mur mahkota dan mur yang berulir metris SNI 05-3221-1992 Mur mahkota dan mur benteng yang berulir metris dengan diameter ulir 42 sampai dengan 100 mm SNI 05-3222-1992 Baud dan mur segi enam seri metris. Toleransi jarak dua sisi yang sejajar dan jarak dua sudut menyudut SNI 07-0052-1987 Baja kanal bertepi bulat canai panas, Mutu dan cara uji SNI 05 05-0820-1989 0820 1989 Steel slotted angle SNI 07-0138-1987 Baja kanal C ringan SNI 07-0307-1989 Besi tuang kelabu, Cara percobaan lengkung SNI 07-0308-1989 Baja karbon, Cara uji komposisi kimia SNI 07-0313-1989 Besi tuang kelabu, Mutu dan cara uji SNI 07-0322-1989 Baja strip canai panas, Mutu dan cara uji SNI 07-0329-1989 Baja bentuk I bertepi bulat canai panas, Mutu dan cara uji SNI 07-0355-1989 Baja karbon cor, Mutu SNI 07-0373-1989 Sekrap besi dan baja, Klasifikasi SNI 07-0374-1989 Baja tuang karbon kekuatan rendah dan menengah SNI 07-0822-1989 Baja karbon strip canai panas untuk pipa SNI 07-0823-1989 Baja pelat dan strip canai panas, Dimensi, massa dan variasi yang diizinkan SNI 07-0942-1989 Besi spons pelet SNI 07-0951-1989 Slab baja karbon tuang kontinyu SNI 07-0953-1989 Bahan bantalan anker besi cor untuk sistem konstruksi pratekan SNI 07-1337-1989 Baja dan paduan tahan panas pada suhu tinggi, Cara uji tarik SNI 07-1338-1989 Baja karbon tempa SNI 07-1580-1989 Baja lembaran canai panas tahan korosi atmosferik untuk konstruksi las SNI 07-1812-1990 Baja cor untuk konstruksi las SNI 07-1814-1990 Batang tembaga dan tembaga paduan SNI 07-1815-1990 Pelat lantai aluminium SNI 07-1855-1990 Baja cor tahan panas

Sub. Seksi Program dan Pelaksanaan Teknis, 109 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 07-4598-1998 Baja tegangan tarik tinggi bergelombang trapesoidal tidak simetris lapis paduan aluminium - seng untuk penutup atap dan dinding SNI 07-4599-1998 Pagar tekuk jaringan kawat baja las lapis seng SNI 07-4603-1998 Tulangan kolom praktis jaringan kawat baja las SNI 07-4605-1998 Persyaratan teknis umum baja tuang SNI 07-6403-2000 Spesifikasi pelat baja karbon dengan kuat tarik rendah dan medium SNI 07-6403-2000 Spesifikasi pelat baja karbon dengan kuat tarik rendah dan medium SNI 07-6701-2002 Billet baja tuang kontinyu untuk baja tulangan beton dan baja profil ringan SNI 07-6764-2002 Spesifikasi baja struktural SNI 07-3759-1995 Logam bentang AASHTO Guide Specifications for Highway Bridge Fabrication with HPS 70W AASHTO Steel Bridge Fabrication Guide Specification AASHTO Steel Bridge Fabrication QC/QA Guide Specification AASHTO M 102M/ M 102-04 Steel Forgings, Carbon and Alloy, for General Industrial Use AASHTO M 103M/ M 103-04 Steel Castings, Carbon, for General Application AASHTO M 108-04 Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use AASHTO M 120-01 Zinc AASHTO M 138M/ M 138-02 Copper Sheet, Strip, Plate, and Rolled Bar M 138M/ AASHTO M 160M/ M 160-04 General Requirements for Steel Plates, Shapes, Sheet Piling, and Bars for Structural Use AASHTO M 163M/ M 163-04 Castings, Iron-Chromium, Iron-Chromium-Nickel, CorrosionResistant, for General Application AASHTO M 164M-O1 High-Strength Bolts for Structural Steel Joints [Metric] AASHTO M 227M/ M 227-97 (2001) Steel Bars, Carbon, Merchant Quality, Mechanical Properties AASHTO M 232M/ M 232-04 Zinc Coating (Hot-Dip) on Iron and Steel Hardware AASHTO M 253-03 Heat-Treated Steel Structural Bolts, 150 ksi MinimumTensile Strength AASHTO M 253M-96 (2001) High-Strength Steel Bolts, Classes 109 and 1093, for StructuralSteel Joints [Metric] AASHTO M 255M/ M 255-97 (2001) Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties AASHTO M 255M/ M 255-97 (2001) Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

Sub. Seksi Program dan Pelaksanaan Teknis, 110 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO M 270M/ M 270-04 Carbon and High-Strength Low-Alloy Structural Steel Shapes, Plates, and Bars and Quenched-and-Tempered Alloy Structural Steel Plates for Bridges AASHTO M 277-81 (2000) Wire Rope and Sockets for Movable AASHTO M 285M/ M 285-03 Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service AASHTO M 291-01 Carbon and Alloy Steel Nuts AASHTO M 291M-03 Carbon and Alloy Steel Nuts [Metric] AASHTO M 292M/ M 292-04 Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both AASHTO M 293M-97 (2001) Hardened Steel Washers [Metric] AASHTO M 314-90 (2000) Steel Anchor Bolts SSPC-ME 1, Uncontaminated Rusted Steel JIS G 3101:2004 JIS G 3104:2004 JIS G 3105:2004 JIS G 3106:2004 JIS G 3108:2004 JIS G 3111:2005 JIS G 3112:2004 JIS G 3114:2004 JIS G 3116:2005 JIS G 3125:2004 JIS G 3128:1999 JIS G 3131:2005 JIS G 3132:2005 JIS G 3137:1994 JIS G 3138:2005 JIS G 3191:2002 JIS G 3192:2005

Rolled steels for general structure Steel bars for rivets Steel bars for chains Rolled steels for welded structure Rolled carbon steel for cold-finished steel bars Rerolled carbon steel Steel bars for concrete reinforcement Hot-rolled atmospheric corrosion resisting steels for welded structure Steel sheets, plates and strip for gas cylinders Superior atmospheric corrosion resisting rolled steels High yield strength steel plates for welded structure Hot-rolled mild steel plates, sheets and strips Hot-rolled carbon steel strip for pipes and tubes Small size-deformed steel bars for prestressed concrete Rolled steel bars for building structure Dimensions, mass and permissible variations of hot rolled steel bars and bar in coil Dimensions, mass and permissible variations of hot rolled steel sections

JIS G 3193:2005 JIS G 3194:1998 JIS G 3199:1992 JIS G 3201:1988 JIS G 3221:1988

Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips Dimensions, mass and permissible variations of hot rolled flat steel Specification for through-thickness characteristics of steel plate and wide flat Carbon steel forgings for general use Chromium molybdenum steel forgings for general use

Sub. Seksi Program dan Pelaksanaan Teknis, 111 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM JIS G 3222:1988 Nickel chromium molybdenum steel forgings for general use JIS G 3251:1988 Carbon steel blooms and billets for forgings JIS G 3302:2005 Hot-dip zinc-coated steel sheets and coils JIS A 5529:1995 Pins and studs for powder actuated tool ISO 4885:1996 Ferrous products -- Heat treatments -- Vocabulary ISO 15787:2001 Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications ISO 404:1992 Steel and steel products -- General technical delivery requirements ISO 630:1995 Structural steels -- Plates, wide flats, bars, sections and profiles ISO 630:1995/Amd 1:2003 ISO 1052:1982 Steels for general engineering purposes ISO 4885:1996 Ferrous products -- Heat treatments -- Vocabulary ISO 6929:1987 Steel products -- Definitions and classification ISO 10474:1991 Steel and steel products -- Inspection documents ISO 657-1:1989 Hot-rolled steel sections -- Part 1: Equal-leg angles -- Dimensions ISO 657-2:1989 Hot-rolled steel sections -- Part 2: Unequal-leg angles -- Dimensions ISO 657-5:1976 Hot-rolled steel sections -- Part 5: Equal-leg angles and unequal-leg angles -- Tolerances for metric and inch series ISO 657-11:1980 Hot-rolled steel sections -- Part 11: Sloping flange channel sections (Metric series) -- Dimensions and sectional properties ISO 657-15:1980 Hot-rolled steel sections -- Part 15: Sloping flange beam sections (Metric series) -- Dimensions and sectional properties ISO 657-16:1980 Hot-rolled steel sections -- Part 16: Sloping flange column sections (metric series) -- Dimensions and sectional properties ISO 657-18:1980 Hot-rolled steel sections -- Part 18: L sections for shipbuilding (metric series) -- Dimensions, sectional properties and tolerances ISO 657-19:1980 Hot-rolled steel sections -- Part 19: Bulb flats (metric series) -- Dimensions, sectional properties and tolerances ISO 657-21:1983 Hot-rolled steel sections -- Part 21: T-sections with equal depth and flange width -- Dimensions ISO 7452:2002 Hot-rolled structural steel plates -- Tolerances on dimensions and shape ISO 20723:2004 Structural steels -- Surface condition of hot-rolled sections -- Delivery requirements ISO 24314:2006 Structural steels -- Structural steels for building with improved seismic resistance -- Technical delivery conditions A183-03 Standard Specification for Carbon Steel Track Bolts and Nuts

Sub. Seksi Program dan Pelaksanaan Teknis, 112 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM A193/A193M-06a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High Temperature or High Pressure Service and Other Special Purpose Applications A194/A194M-06a Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both A307-04e1 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength A320/A320M-05a Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service A325M-05 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric] A325-06 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength A354-04e1 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners A394-05e1 A394 05e1 Standard Specification for Steel Transmission Tower Bolts Bolts, Zinc-Coated Zinc Coated and Bare A437/A437M-06 Standard Specification for Alloy-Steel Turbine-Type Bolting Material Specially Heat Treated for HighTemperature Service A449-04be1 Specification for Hex Cap Screws, Bolts, and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use A453/A453M-04 Standard Specification for High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels A490-06 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength A490M-04ae1 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric] A540/A540M-06 Standard Specification for Alloy-Steel Bolting Materials for Special Applications A761/A761M-04 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches A1014/A1014M-06 Standard Specification for Precipitation-Hardening Bolting Material (UNS N07718) for High Temperature Service A370-06 Standard Test Methods and Definitions for Mechanical Testing of Steel Products A751-01(2006) Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products A944-05 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens A1034/A1034M-05b Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

Sub. Seksi Program dan Pelaksanaan Teknis, 113 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM A981-97(2002) Standard Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors A956-06 Standard Test Method for Leeb Hardness Testing of Steel Products A6/A6M-06 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling A36/A36M-05 Standard Specification for Carbon Structural Steel A123/A123M-02 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products A276-06 Standard Specification for Stainless Steel Bars and Shapes A502-03 Standard Specification for Rivets, Steel, Structural A514/A514M-05 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding A563M-06 Standard Specification for Carbon and Alloy Steel Nuts [Metric) A633/A633M 01(2006) Standard Specification for Normalized High-Strength A633/A633M-01(2006) High Strength Low-Alloy Low Alloy Structural Steel Plates A673/A673M-05a Standard Specification for Sampling Procedure for Impact Testing of Structural Steel A690/A690M-05 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments A709/A709M-06a Standard Specification for Structural Steel for Bridges F436M-04 Standard Specification for Hardened Steel Washers [Metric] F436-04 Standard Specification for Hardened Steel Washers F844-04e1 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use ENV 1090-1:1996 Execution of steel structures - Part 1: General rules and rules for buildings ENV 1090-2:1998 Execution of steel structures - Part 2: Supplementary rules for cold formed thin gauge components and sheeting ENV 1090-3:1997 Execution of steel structures - Part 3: Supplementary rules for high yield strength steels ENV 1090-4:1997 Execution of steel structures - Part 4: Supplementary rules for hollow section structures ENV 1090-5:1998 Execution of steel structures - Part 5: Supplementary rules for bridges ENV 1090-6:2000 Execution of steel structures - Part 6: Supplementary rules for stainless steel ASCE Fastenings for Seismic Retrofitting

Jembatan

Spesifikasi Konstruksi

Las

Sub. Seksi Program dan Pelaksanaan Teknis, 114 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM Manual Pelaksanaan Pengelasan Struktur Baja SNI 07-2932-1992 Simbol las SNI 07-3025-1992 Persyaratan las - Ketentuan umum, persyaratan servis untuk sambungan berlas SNI 07-3025-1992 Persyaratan las - Ketentuan umum, persyaratan servis untuk sambungan berlas SNI 07-3026-1992 Las - Pertimbangan untuk menjamin mutu struktur las SNI 07-3026-1992 Las - Pertimbangan untuk menjamin mutu struktur las SNI 07-3027-1992 Las - Faktor-faktor yang harus dipertimbangkan dalam penilaian perusahaan yang menggunakan las sebagai cara utama fabrikasi SNI 07-3027-1992 Las - Faktor-faktor yang harus dipertimbangkan dalam penilaian perusahaan yang menggunakan las sebagai cara utama fabrikasi SNI 07-3028-1992 Azas posisi las - Definisi dan nilai sudut kemiringan serta notasi untuk berbagai lasan lurus SNI 07-6221-2000 Istilah pengelasan SNI 07-6405-2000 Tata cara pengelasan pipa baja untuk air di lapangan SNI 13-3032-2002 Kualifikasi pengelasan Bridge Welding Code: AASHTO/AWS-D1.5M/D1.5: 2002 An American National Standard ISO 857-1:1998 Welding and allied processes -- Vocabulary -- Part 1: Metal welding processes ISO 9013:2002 Thermal cutting -- Classification of thermal cuts -- Geometrical product specification and quality tolerances ISO 9692-2:1998 Welding and allied processes -- Joint preparation -- Part 2: Submerged arc welding of steels ISO 9692-3:2000 Welding and allied processes -- Recommendations for joint preparation -- Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys ISO 11970:2001 Specification and approval of welding procedures for production welding of steel castings ISO 13916:1996 Welding -- Guidance on the measurement of preheating temperature, interpass temperature and preheat maintenance temperature ISO 13920:1996 Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles -Shape and position ISO 14327:2004 Resistance welding -- Procedures for determining the weldability lobe for resistance spot, projection and seam welding ISO 15620:2000 Welding -- Friction welding of metallic materials ISO 16432:2006 Resistance welding -- Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)

Sub. Seksi Program dan Pelaksanaan Teknis, 115 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 16433:2006 Resistance welding -- Procedure for seam welding of uncoated and coated low carbon steels ISO 17652-1:2003 Welding -- Test for shop primers in relation to welding and allied processes -- Part 1: General requirements ISO 17652-2:2003 Welding -- Test for shop primers in relation to welding and allied processes -- Part 2: Welding properties of shop primers ISO 17652-3:2003 Welding -- Test for shop primers in relation to welding and allied processes -- Part 3: Thermal cutting ISO 17652-4:2003 Welding -- Test for shop primers in relation to welding and allied processes -- Part 4: Emission of fumes and gases ISO 17657-1:2005 Resistance welding -- Welding current measurement for resistance welding -- Part 1: Guidelines for measurement ISO 17657-2:2005 Resistance welding -- Welding current measurement for resistance welding -- Part 2: Welding current meter with current sensing coil ISO 17657-3:2005 Resistance welding -- Welding current measurement for resistance welding -- Part 3: Current sensing coil ISO 17657-4:2005 Resistance welding -- Welding current measurement for resistance welding -- Part 4: Calibration system ISO 17657-5:2005 Resistance welding -- Welding current measurement for resistance welding -- Part 5: Verification of welding current measuring system ISO 17658:2002 Welding -- Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts -- Terminology ISO 17660-1:2006 Welding -- Welding of reinforcing steel -- Part 1: Load-bearing welded joints ISO 17660-2:2006 Welding -- Welding of reinforcing steel -- Part 2: Non load-bearing welded joints ISO/TR 17671-1:2002 Welding -- Recommendations for welding of metallic materials -- Part 1: General guidance for arc welding ISO/TR 17671-2:2002 Welding -- Recommendations for welding of metallic materials -- Part 2: Arc welding of ferritic steels ISO/TR 17671-3:2002 Welding -- Recommendations for welding of metallic materials -- Part 3: Arc welding of stainless steels ISO/TR 17671-4:2002 Welding -- Recommendations for welding of metallic materials -- Part 4: Arc welding of aluminium and aluminium alloys ISO/TR 17844:2004 Welding -- Comparison of standardised methods for the avoidance of cold cracks ISO/TR 22824:2003 Welding consumables -- Predicted and measured FN in specifications -- A position statement of the experts of IIW Commission IX

Sub. Seksi Program dan Pelaksanaan Teknis, 116 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 2400:1972 Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination ISO 6520-1:1998 Welding and allied processes -- Classification of geometric imperfections in metallic materials -Part 1: Fusion welding ISO 6520-2:2001 Welding and allied processes -- Classification of geometric imperfections in metallic materials -Part 2: Welding with pressure ISO 6947:1990 Welds -- Working positions -- Definitions of angles of slope and rotation ISO 17659:2002 Welding -- Multilingual terms for welded joints with illustrations ISO/TS 17845:2004 Welding and allied processes -- Designation system for imperfections ISO 18278-2:2004 Resistance welding -- Weldability -- Part 2: Alternative procedures for the assessment of sheet steels for spot welding SNI 15-3781-1995 Slag abrasive untuk proses blasting SNI 03 03-2408-1991 2408 1991 Tata Cara Pengecatan Logam SNI 07-6398-2000 Tata cara pelapisan epoksi cair untuk bagian dalam dan luar pada perpipaan air dari baja SNI 06-0347-1989 Dempul untuk kayu, Mutu SNI 06-4825-1998 Spesifikasi campuran cat marka jalan siap pakai warna putih dan kuning SNI 06-6397-2000 Spesifikasi cat jembatan warna hijau daun SNI 06-3685.1-2000 Spesifikasi cat merah timbal siap pakai SNI 06-4826-1998 Spesifikasi cat termoplastik pemantul warna putih dan kuning untuk marka jalan (bentuk padat) SNI 06-0063-1987 Cat dasar meni timbal untuk besi dan baja, Mutu SNI 06-1311-1989 Barium sulfat untuk industri cat SNI 15-4839-1998 Spesifikasi manik-manik kaca (glass bead) untuk marka jalan SNI 07-1353-1989 Proses pelapisan seng celup panas, Petunjuk praktis SNI 07-1870-1990 Proses pelapisan seng secara elektrolitik, Petunjuk praktis SNI 07-2197-1991 Perlakuan permukaan dan pelapisan logam, Klasifikasi istilah umum SNI 07-4614-1998 Pelapisan seng secara proses listrik pada besi atau baja SNI 07-4615-1998 Pelapisan nikel dan krom secara proses listrik 023/T/BM/1998 Pedoman penanggulangan korosi komponen baja jembatan dengan cara pengecatan AASHTO M 69-70 (2000) Aluminum Paint AASHTO M 247-02 Glass Beads Used in Traffic Paints AASHTO M 248-91 (2000) Ready-Mixed White and Yellow Traffic Paints

Sub. Seksi Program dan Pelaksanaan Teknis, 117 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM AASHTO M 249-98 White and Yellow Reflective Thermoplastic Striping Material (Solid Form) AASHTO M 268-03 Retroreflective Sheeting for Traffic Control

Jembatan

Spesifikasi Konstruksi

Cat AASHTO M 271-02 The Evaluation of Blast-Cleaned Steel Surfaces AASHTO M 290-96 (2000) Acrylic Prismatic Reflectors and Embossed Aluminum Frames for Signs AASHTO M 300-03 Inorganic Zinc-Rich Primer , AASHTO R 31-04 Evaluation of Coating Systems with Zinc-Rich Primers AASHTO T 250-04 Thermoplastic Traffic Line Material AASHTO M 107-04 Bronze Castings for Bridges and Turntables AASHTO M 105-96 (2000) Gray Iron Castings AASHTO M 111M/ M 111-04 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products AASHTO M 298-01 298 01 Coatings of Zinc Mechanically Deposited on Iron and Steel AASHTO M 299-01 Coatings of Cadmium Mechanically Deposited SSPC-SP COM, Surface Preparation Commentary for Steel and Concrete Substrates SSPC-SP 1, Solvent Cleaning SSPC-SP 2, Hand Tool Cleaning SSPC-SP 3, Power Tool Cleaning SSPC-SP 5/NACE No. 1, White Metal Blast Cleaning SSPC-SP 6/NACE No. 3, Commercial Blast Cleaning SSPC-SP 7/NACE No. 4, Brush-Off Blast Cleaning SSPC-SP 8, Pickling SSPC-SP 10/NACE No. 2, Near-White Blast Cleaning SSPC-SP 11, Power Tool Cleaning to Bare Metal SSPC-SP 12/NACE No. 5, Surface Preparation and Cleaning of Metals by Waterjetting Prior to Recoating SSPC-SP 13/NACE No. 6, Surface Preparation of Concrete SSPC-SP 14/NACE No. 8, Industrial Blast Cleaning SSPC-SP 15, Commercial Grade Power Tool Cleaning SSPC-TR 1/NACE 6G194, Thermal Pre-Cleaning SSPC-TR 2/NACE 6G198, Wet Abrasive Blast Cleaning SSPC-TR 3/NACE 6A192, Dehumidification and Temperature Control During Surface Preparation, Application, and Curing for Coatings/Linings of Steel Tanks, Vessels, and Other Enclosed Spaces SSPC-TR 4/NACE 80200, Preparation of Protective Coating Specifications for Atmospheric Service

Sub. Seksi Program dan Pelaksanaan Teknis, 118 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SSPC-TR 5/ICRI 03741/NACE 02203, Design, Installation, and Maintenance of Protective Polymer Flooring Systems for Concrete

SSPC-AB 1, Mineral and Slag Abrasives SSPC-AB 2, Cleanliness of Recycled Ferrous Metallic Abrasives SSPC-AB 3, Ferrous Metallic Abrasive SSPC-PS COM, Commentary on Painting Systems SSPC-PS Guide 1.00, Guide for Selecting Oil Base Painting Systems SSPC-PS 1.09, Three-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment) SSPC-PS 1.10, Four-Coat Oil Base Zinc Oxide Painting System (Without Lead or Chromate Pigment) SSPC-PS 1.13, One-Coat Oil Base Slow Drying Maintenance Painting System (Without Lead or Chromate Pigments) SSPC PS Guide 2.00, Guide for Selecting Alkyd Painting Systems SSPC-PS SSPC-PS Guide 4.00, Guide for Selecting Vinyl Painting Systems SSPC-PS 4.02, Four-Coat Vinyl Painting System SSPC-PS 4.04, Four-Coat White or Colored Vinyl Painting System (For Fresh Water, Chemical, and Corrosive Atmospheres) SSPC-PS Guide 7.00, Guide for Selecting One-Coat Shop Painting Systems SSPC-PS Guide 8.00, Guide to Topcoating Zinc-Rich Primers SSPC-PS 9.01, Cold-Applied Asphalt Mastic Painting System with Extra Thick Film SSPC-PS 10.01, Hot-Applied Coal Tar Enamel Painting System SSPC-PS 10.02, Cold-Applied Coal Tar Mastic Painting System SSPC-PS 11.01, Black (or Dark Red) Coal Tar Epoxy-Polyamide Painting System SSPC-PS Guide 12.00, Guide to Zinc-Rich Coating Systems SSPC-PS 12.01, One Coat Zinc-Rich Painting System SSPC-PS 13.01, Epoxy Polyamide Painting System SSPC-PS 14.01, Steel Joist Shop Painting System SSPC-PS Guide 15.00, Guide for Selecting Chlorinated Rubber Painting Systems SSPC-PS 15.01, Chlorinated Rubber Painting System for Salt Water Immersion SSPC-PS 15.02, Chlorinated Rubber Painting System for Fresh Water Immersion SSPC-PS 15.03, Chlorinated Rubber Painting System for Marine and Industrial Atmospheres SSPC-PS 15.04, Chlorinated Rubber Painting System for Field Application Over a Shop-Applied Solvent Base Inorganic Zinc-Rich Primer SSPC-PS 16.01, Silicone Alkyd Painting System for New Steel SSPC-PS Guide 17.00, Guide for Selecting Urethane Painting Systems

Sub. Seksi Program dan Pelaksanaan Teknis, 119 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SSPC-PS 18.01, Three-Coat Latex Painting System SSPC-PS Guide 19.00, Guide for Selecting Painting Systems for Ship Bottoms SSPC-PS Guide 20.00, Guide for Selecting Painting Systems for Boottoppings SSPC-PS Guide 21.00, Guide for Selecting Painting Systems for Topsides SSPC-PS Guide 22.00 Guide for Selecting One-Coat Preconstruction or Prefabrication Painting Systems SSPC-CS 23.00/AWS C2.23M/NACE No. 12, Specification for the Application of Thermal Spray Coatings (Metallizing) of Aluminum, Zinc, and Their Alloys and Composites for the Corrosion Protection of Steel SSPC-PS 24.00, Latex Painting System for Industrial and Marine Atmospheres, Performance-Based SSPC-PS 26.00, Aluminum Pigmented Epoxy Coating System Materials Specification, Performance-Based SSPC-PS 27.00, Alkyd Coating System Materials Specification, Performance-Based SSPC-Paint COM, Commentary on Paint Specifications SSPC-Paint 8, Aluminum Vinyl Paint SSPC-Paint SSPC Paint 9, White (or Colored) Vinyl Paint SSPC-Paint 15, Steel Joist Shop Primer/Metal Building Primer SSPC-Paint 16, Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint SSPC-Paint 17, Chlorinated Rubber Inhibitive Primer SSPC-Paint 18, Chlorinated Rubber Intermediate Coat Paint SSPC-Paint 19, Chlorinated Rubber Topcoat Paint SSPC-Paint 20, Zinc-Rich Coating, Type I - Inorganic and Type II - Organic SSPC-Paint 21, White or Colored Silicone Alkyd Paint SSPC-Paint 22, Epoxy Polyamide Paints (Primer, Intermediate, and Topcoat) SSPC-Paint 23, Latex Primer for Steel Surfaces SSPC-Paint 24, Latex Semigloss Exterior Topcoat SSPC-Paint 25, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Hand Cleaned Steel SSPC-Paint 25 BCS, Zinc Oxide, Alkyd, Linseed Oil Primer for Use Over Blast Cleaned Steel SSPC-Paint 26, Slow-Drying Linseed Oil Black Maintenance Primer (Without Lead or Chromate Pigment) SSPC-Paint 27, Basic Zinc Chromate-Vinyl Butyral Wash Primer SSPC-Paint 28, Water-Borne Epoxy Primer for Steel Surfaces SSPC-Paint 29, Zinc Dust Sacrificial Primer, Performance-Based SSPC-Paint 30, Weld-Through Inorganic Zinc Primer SSPC-Paint 31, Single-Package Water-Borne Alkyd Primer for Steel Surfaces, Performance-Based SSPC-Paint 32, Coal Tar Emulsion Coating SSPC-Paint 33, Coal Tar Mastic, Cold Applied SSPC-Paint 34, Water-Borne Epoxy Topcoat for Steel Surfaces SSPC-Paint 35, Medium Oil Alkyd Primer (Air Dry/Low Bake)

Sub. Seksi Program dan Pelaksanaan Teknis, 120 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SSPC-Paint 36, Two-Component Weatherable Aliphatic Polyurethane Topcoat, Performance-Based SSPC-Paint 37, Waterborne Epoxy Coating for Cementitious Substrates, Performance-Based SSPC-Paint 38, Single-Component Moisture-Cure Weatherable Aliphatic Polyurethane Topcoat, Performance-Based SSPC-Paint 39, Two-Component Aliphatic Polyurea Topcoat, Fast or Moderate Drying, Performance-Based SSPC-Paint 101, Aluminum Alkyd Paint SSPC-Paint 102, Black Alkyd Paint SSPC-Paint 104, White or Tinted Alkyd Paint SSPC-Paint 106, Black Vinyl Paint SSPC-Paint 108, High-Build Thixotropic Leafing Aluminum Paint SSPC-PA COM, Commentary on Paint Application Monitoring and Controlling Ambient Conditions During Coating Operations SSPC-PA SSPC PA 1, Shop, Field, and Maintenance Painting of Steel SSPC-PA 2, Measurement of Dry Coating Thickness with Magnetic Gages SSPC-PA 3, A Guide to Safety in Paint Application SSPC-PA Guide 4, Guide to Maintenance Repainting with Oil Base or Alkyd Painting Systems SSPC-PA Guide 5, Guide to Maintenance Coating of Steel Structures in Atmospheric Surface SSPC-PA 6/NACE No. 10, Fiberglass-Reinforced Plastic (FRP) Linings Applied to Bottoms of Carbon Steel Aboveground Storage Tanks SSPC-PA 7, Applying Thin Film Coatings to Concrete SSPC-PA 8/NACE No. 11, Thin-Film Organic Linings Applied in New Carbon Steel Process Vessels SSPC-Guide 6, Guide for Containing Debris Generated During Paint Removal Operations SSPC-Guide 7, Guide for the Disposal of Lead-Contaminated Surface Preparation Debris SSPC-Guide 9, Guide for Atmospheric Testing of Coatings in the Field SSPC-Guide 10, Guide to Specifying Coatings Conforming to Volatile Organic Compound (VOC) Content Requirements SSPC-Guide 12, Guide for Illumination of Industrial Painting Projects SSPC-Guide 13, Guide for the Identification and Use of Industrial Coating Materials in Computerized Product Databases SSPC-Guide 14, Guide for the Repair of Imperfections in Galvanized, Organic, or Inorganic Zinc-Coated Steel Using Organic Zinc-Rich Coatings SSPC-Guide 15, Field Methods for Retrieval and Analysis of Soluble Salts on Steel and Other Nonporous Substrates SSPC-Guide 16, Guide to Specifying and Selecting Dust Collectors

Sub. Seksi Program dan Pelaksanaan Teknis, 121 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SSPC-Guide 17, Guide to Developing a Corporate Safety Program for Industrial Painting and Coating Contractors SSPC-TU 1, Surface-Tolerant Coatings for Steel SSPC-TU 2/NACE 6G197 Design, Installation, and Maintenance of Coating Systems for Concrete Used in Secondary Containment SSPC-TU 3, Overcoating SSPC-TU 4, Field Methods for Retrieval and Analysis of Soluble Salts on Substrates (Withdrawn) SSPC-TU 5, Accelerated Testing of Industrial Protective Coatings SSPC-TU 6, Chemical Stripping of Organic Coatings from Steel Structures SSPC-TU 7, Conducting Ambient Air, Soil, and Water Sampling During Surface Preparation and Paint Disturbance Activities SSPC-TU 8, The Use of Isocyanate-Containing Paints as Industrial Maintenance Coatings SSPC-TU 9, Estimating Costs for Protective Coatings Projects SSPC-TU SSPC TU 10, Procedures for Applying Thick Film Coatings and Surfacings Over Concrete Floors HA - Part 1 BD 35/06 Quality Assurance Scheme for Paints and Similar Protective Coatings HA - Part 2 BD 43/03 The Impregnation of Reinforced and Prestressed Concrete Highway Structures using Hydrophobic Pore-Lining Impregnants HA - Part 3 BA 85/04 Coatings for Concrete Highway Structures & Ancillary Structures CEB – FIP : Coating Protection for Reinforcement ISO 2063:2005 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys ISO 4520:1981 Chromate conversion coatings on electroplated zinc and cadmium coatings ISO 7583:1986 Anodizing of aluminium and its alloys -- Vocabulary ISO 9587:1999 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement ISO 9588:1999 Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement ISO 9717:1990 Phosphate conversion coatings for metals -- Method of specifying requirements ISO 10546:1993 Chemical conversion coatings -- Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys ISO 14231:2000 Thermal spraying -- Acceptance inspection of thermal spraying equipment ISO 14232:2000 Thermal spraying -- Powders -- Composition and technical supply conditions ISO 14917:1999 Thermal spraying -- Terminology, classification

Sub. Seksi Program dan Pelaksanaan Teknis, 122 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 14919:2001 Thermal spraying -- Wires, rods and cords for flame and arc spraying -- Classification -- Technical supply conditions ISO 14920:1999 Thermal spraying -- Spraying and fusing of self-fluxing alloys ISO 14921:2001 Thermal spraying -- Procedures for the application of thermally sprayed coatings for engineering components ISO 14922-1:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 1: Guidance for selection and use ISO 14922-2:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 2: Comprehensive quality requirements ISO 14922-3:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 3: Standard quality requirements ISO 14922-4:1999 Thermal spraying -- Quality requirements of thermally sprayed structures -- Part 4: Elementary quality requirements ISO 14924:2005 Thermal spraying -- Post Post-treatment treatment and finishing of thermally sprayed coatings ISO 15730:2000 Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel ISO 16348:2003 Metallic and other inorganic coatings -- Definitions and conventions concerning appearance ISO 18332:2007 Metallic and other inorganic coatings -- Definitions and conventions concerning porosity ISO 1456:2003 Metallic coatings -- Electrodeposited coatings of nickel plus chromium and of copper plus nickel plus chromium ISO 1458:2002 Metallic coatings -- Electrodeposited coatings of nickel ISO 2063:2005 Thermal spraying -- Metallic and other inorganic coatings -- Zinc, aluminium and their alloys ISO 2079:1981 Surface treatment and metallic coatings -- General classification of terms ISO 2080:1981 Electroplating and related processes -- Vocabulary ISO 2081:1986 Metallic coatings -- Electroplated coatings of zinc on iron or steel ISO 2082:1986 Metallic coatings -- Electroplated coatings of cadmium on iron or steel ISO 4519:1980 Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes ISO 4521:1985 Metallic coatings -- Electrodeposited silver and silver alloy coatings for engineering purposes ISO 4523:1985 Metallic coatings -- Electrodeposited gold and gold alloy coatings for engineering purposes ISO 4525:2003 Metallic coatings -- Electroplated coatings of nickel plus chromium on plastics materials ISO 4526:2004 Metallic coatings -- Electroplated coatings of nickel for engineering purposes

Sub. Seksi Program dan Pelaksanaan Teknis, 123 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 6158:2004 Metallic coatings -- Electrodeposited coatings of chromium for engineering purposes ISO 7989-1:2006 Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 1: General principles ISO 7989-2:2007 Steel wire and wire products -- Non-ferrous metallic coatings on steel wire -- Part 2: Zinc or zincalloy coating ISO 9587:1999 Metallic and other inorganic coatings -- Pretreatments of iron or steel to reduce the risk of hydrogen embrittlement ISO 9588:1999 Metallic and other inorganic coatings -- Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement ISO 10683:2000 Fasteners -- Non-electrolytically applied zinc flake coatings ISO 10684:2004 Fasteners -- Hot dip galvanized coatings ISO 12686:1999 Metallic and other inorganic coatings -- Automated controlled shot-peening of metallic articles prior to nickel, autocatalytic nickel or chromium plating, or as a final finish ISO 16348:2003 Metallic and other inorganic coatings -- Definitions and conventions concerning appearance ISO 18332:2007 Metallic and other inorganic coatings -- Definitions and conventions concerning porosity ISO 15741:2001 Paints and varnishes -- Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases ISO 20340:2003 Paints and varnishes -- Performance requirements for protective paint systems for offshore and related structures ISO 4618:2006 Paints and varnishes -- Terms and definitions ISO 8130-14:2004 Coating powders -- Part 14: Terminology ISO 7599:1983 Anodizing of aluminium and its alloys -- General specifications for anodic oxide coatings on aluminium ISO 10074:1994 Specification for hard anodic oxidation coatings on aluminium and its alloys ISO 4618:2006 Paints and varnishes -- Terms and definitions ISO 8130-14:2004 Coating powders -- Part 14: Terminology D16-03 Standard Terminology for Paint, Related Coatings, Materials, and Applications D2092-95(2001)e1 Standard Guide for Preparation of Zinc-Coated (Galvanized) Steel Surfaces for Painting D2200-95(2001)e1 Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces D5068-04 Standard Practice for Preparation of Paint Brushes for Evaluation D5069-92(2002)e1 Standard Practice for Preparation of Paint-Roller Covers for Evaluation D6237-03 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

Sub. Seksi Program dan Pelaksanaan Teknis, 124 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D6386-99(2005) Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting D4258-05 Standard Practice for Surface Cleaning Concrete for Coating D4261-05 Standard Practice for Surface Cleaning Concrete Unit Masonry for Coating D5065-01 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces D7055-04 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings D7089-06 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing D4227-05 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces D4228-05 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces D5367-00 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted D2201-99(2006) Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products D609-00(2006) Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

Jembatan

Spesifikasi Konstruksi

KAYU SNI 01-1671-1989 Jernang SNI 01-2023-1990 Kayu lapis struktural SNI 01-2024-1990 Kayu lapis cetakan beton SNI 01-2029-1990 Kayu gergajian jati SNI 01-2030-1991 Kayu, Nama perdagangan SNI 01-2704-1992 Kayu lapis penggunaan umum, Mutu SNI 01-2900-1999 Damar SNI 01-5007.10-2000 Seratus jenis kayu bundar rimba SNI 01-5007.11-2001 Kayu bundar tusam SNI 01-5007.1-1999 Kayu bundar jati SNI 01-5007.1-2003 Produk kayu bundar - Bagian 1: Kayu bundar jati

Sub. Seksi Program dan Pelaksanaan Teknis, 125 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 01-5007.12-2001 Kayu bundar sonokeling dan sonokembang SNI 01-5007.13-2001 Kayu bundar mahoni SNI 01-5007.14-2001 Kayu bundar rasamala SNI 01-5007.15-2001 Kayu bundar agatis SNI 01-5007.16-2001 Kayu bundar sengon dan jabon SNI 01-5007.17-2001 Pengukuran dan tabel isi kayu bundar jati SNI 01-5007.18-2003 Produk kayu bundar - Bagian 18: Kayu bundar jati penghara industri SNI 01-5007.19-2003 Produk kayu bundar - Bagian 19: Kayu bundar sortimen KBK SNI 01-5007.2-2000 Pengukuran dan tabel isi kayu bundar rimba SNI 01-5007.3-2000 Petunjuk teknis pengujian kayu bundar rimba SNI 01-5007.3-2000 Petunjuk teknis pengujian kayu bundar rimba SNI 01-5007.4-2000 Kayu bundar rimba sortimen KBB SNI 01-5007.5-2000 Kayu bundar rimba sortimen KBS SNI 01 01-5007.6-2000 5007.6 2000 Kayu bundar Sungkai SNI 01-5007.7-2000 Kayu bundar merbau SNI 01-5007.8-2000 Kayu bundar perupuk SNI 01-5007.9-2000 Kayu bundar gmelina dan akasia mangium SNI 01-5008.10-2001 Kayu bentukan (moulding) tusam SNI 01-5008.11-2000 Kayu gergajian tusam SNI 01-5008.1-1999 Kayu gergajian rimba SNI 01-5008.2-1999 Kayu lapis dan papan blok penggunaan umum SNI 01-5008.5-1999 Kayu gergajian jati SNI 01-5008.6-1999 Kayu cendana SNI 01-5008.7-1999 Kayu lapis struktural SNI 01-5008.9-2000 Kayu lapis indah jati SNI 01-5009.1-1999 Gaharu SNI 02-0334-1989 Kampak, Mutu dan cara uji SNI 03-3233-1998 Tata cara pengawetan kayu untuk bangunan rumah dan gedung SNI 03-3528-1994 Pengawetan kayu untuk perumahan dan gedung SNI 03-5010.1-1999 Pengawetan kayu untuk perumahan dan gedung SNI 03-6372-2000 Tata cara pengondisian kelengasan kayu dan bahan berkayu SNI 05-1595-1989 Mata serut kayu SNI 03-3527-1994 Mutu kayu bangunan AASHTO M 133-04 Preservatives and Pressure Treatment Processes for Timber AASHTO M 168-96 (1999) Wood Products

Sub. Seksi Program dan Pelaksanaan Teknis, 126 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM

EN 1058:1995 Wood-based panels - Determination of characteristics values of mechanical properties and density EN 1194:1999 Timber structures - Glued laminated timber - Strength classes and determination of characteristic values EN 12465:2001 Wood poles for overhead lines - Durability requirements EN 12510:2001 Wood poles for overhead lines - Strength grading criteria EN 12510:2001/AC:2002 Wood poles for overhead lines - Strength grading criteria EN 14080:2005 Timber structures - Glued laminated timber - Requirements EN 14081-1:2005 Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements EN 14081-2:2005 Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; additional requirements for initial type testing EN 14081-3:2005 14081 3:2005 Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; additional requirements for factory production control EN 14081-4:2005 Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine Grading -Grading machine settings for machine controlled systems EN 14250:2004 Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners EN 14374:2004 Timber structures - Structural laminated veneer lumber – Requirements EN 26891:1991 Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) EN 336:2003 Structural timber - Sizes, permitted deviations EN 338:2003 Structural timber - Strength classes EN 385:2001 Finger jointed structural timber - Performance requirements and minimum production requirements EN 386:2001 Glued laminated timber - Performance requirements and minimum production requirements EN 387:2001 Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements EN 390:1994 Glued laminated timber - Sizes - Permissible deviations EN 912:1999 Timber fasteners - Specifications for connectors for timber EN 912:1999/AC:2000 Timber fasteners - Specifications for connectors for timber JIS A 9002:2005 Preservative treatments of wood products by pressure processes JIS A 9003:1960 Preservative treatments of woods by open tank processes JIS A 9005:1993 Preservative treatment of woods by butt pressure processes

Sub. Seksi Program dan Pelaksanaan Teknis, 127 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM JIS A 9101:1995 JIS A 9102:1986 processes JIS A 9103:1977 JIS A 9104:1995 JIS A 9105:1989 JIS A 9106:1977 processes

Wood poles treated with creosote oil by pressure processes Wood poles treated with wood preservatives of phenols and inorganic fluoride type by pressure

JIS A 9107:1995 JIS A 9108:1997 JIS A 9110:1975 JIS A 9111:1975 JIS A 9112:1989 JIS A 5531:1978

Wood poles treated with preservatives of chrome-copper-arsenic type by pressure processes Foundation wood sill treated with preservatives by pressure processes Treated crossties by diffusion process Treated wood poles by diffusion process Treated lumbers by diffusion process Fittings for wooden construction

Crossties treated with creosote oil by pressure processes Wood poles treated with copper sulfate by butt pressure process Wood poles treated with preservatives of phenoles and inorganic fluoride type by butt pressure

ISO 738:1981 Coniferous sawn timber -- Sizes -- Permissible deviations and shrinkage ISO 1029:1974 Coniferous sawn timber -- Defects -- Classification ISO 1031:1974 Coniferous sawn timber -- Defects -- Terms and definitions ISO 1032:1974 Coniferous sawn timber -- Sizes -- Terms and definitions ISO 2299:1973 Sawn timber of broadleaved species -- Defects -- Classification ISO 2300:1973 Sawn timber of broadleaved species -- Defects -- Terms and definitions ISO 8903:1994 Broadleaved sawn timber -- Nominal sizes ISO 4472:1983 Coniferous and broadleaved sawn timber -- Transportation packages D9-05 Standard Terminology Relating to Wood and Wood-Based Products D2559-04 Standard Specification for Adhesives for Structural Laminated Wood Products for Use Under Exterior (Wet Use) Exposure Conditions D5055-05 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists D5933-96(2001) Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions D6815-02a Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products D25-99(2005) Standard Specification for Round Timber Piles

Sub. Seksi Program dan Pelaksanaan Teknis, 128 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM D5572-95(2005) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products D5751-99(2005) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products D245-06 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber D1990-00(2002)e1 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens D2915-03 Standard Practice for Evaluating Allowable Properties for Grades of Structural Lumber D5456-06 Standard Specification for Evaluation of Structural Composite Lumber Products D6570-04 Standard Practice for Assigning Allowable Properties for Mechanically-Graded Lumber ASCE Classic Wood Structures Mechanical Connections in Wood Structures Timber Bulkheads

Jembatan

Spesifikasi Konstruksi

Struktur Jembatan Manual Pemasangan Bangunan Atas Jembatan Beton Prategang cara launching Manual Pemasangan Bangunan Atas Jembatan Beton Prategang cara kantilever Manual Pemasangan Bangunan Atas Jembatan Rangka Baja cara Kantilever Manual Pemasangan Bangunan Atas Jembatan Rangka Baja cara semi Kantilever Standar bangunan atas jembatan gelagar beton pratekan Tipe T kelas A bentang 22 - 40 m Standar bangunan atas jembatan gelagar beton pratekan Tipe T kelas B bentang 22 - 40 m Standar bangunan atas jembatan gelagar beton pratekan Tipe I kelas A bentang 22 - 40 m

Jembatan

Spesifikasi Konstruksi

Struktur Jembatan Standar bangunan atas jembatan gelagar beton pratekan Tipe I kelas B bentang 22 - 40 m Standar bangunan atas jembatan gelagar beton bertulang Tipe T kelas A/B bentang 22 - 40 m Standar gorong-gorong persegi beton bertulang tipe boks tunggal, ganda, dan triple ukuran boks 1,5 m x 1 m s/d 3 m x 3 m Standar gelagar komposit baja-beton kelas A/B bentang 8 - 20 m 001/T/BM/1998 Pedoman pemasangan jembatan gantung produksi PT Amarta Karya Type 21 M

Sub. Seksi Program dan Pelaksanaan Teknis, 129 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM 002/T/BM/1998 Pedoman pemasangan jembatan gantung produksi PT Amarta Karya Type 30 M 003/T/BM/1998 Pedoman pemasangan jembatan gantung produksi PT Amarta Karya type 60 M 004/T/BM/1998 Pedoman pemasangan jembatan gantung produksi PT Amarta Karya type 92 M 005/T/BM/1998 Pedoman pemasangan jembatan gantung produksi PT Amarta Karya type 120 M 007/T/BM/1999 Pedoman Pemasangan Modifikasi Jembatan Bailey dengan Cara Perkuatan Kabel, Bentang total 64,05 meter

Jembatan

Spesifikasi Konstruksi

PONDASI TIANG Manual Pelaksanaan Pengelasan Tiang Pancang Baja Pedoman Pemancangan Tiang Pancang SNI 03 03-3448-1994 3448 1994 Tata Cara Penyambungan Tiang Pancang Beton Pracetak Penampang Persegi Dengan Sistem Monolit Bahan Epoxy SNI 03-6761-2002 Metode Pengujian untuk Tiang Tunggal terhadap Beban Tarik Aksial Statis SNI 03-6762-2002 Metode Pengujian Beban Lateral pada Pondasi Tiang SNI 03-6796-2002 Metode pengujian untuk menentukan daya dukung tanah dengan beban statis pada pondasi dangkal SNI 03-4434-1997 Spesifikasi tiang pancang beton pratekan untuk pondasi jembatan ukuran (30 x 30, 35 x 35, 40 x 40) cm2, panjang 10-20 meter dengan baja tulangan BJ 24 dan BJ 40 ACI 543R-00: Design, Manufacture, and Installation of Concrete Piles (Reapproved 2005) JIS A 5526:2005 Steel H piles EN 12699:2000 EN 12715:2000 EN 12716:2001 EN 14199:2005

Execution of special geotechnical work - Displacement piles Execution of special geotechnical work - Grouting Execution of special geotechnical works - Jet grouting Execution of special geotechnical works - Micropiles

ACI PHG: Practical Handbook of Grouting SP-83: Innovative Cement Grouting

Sub. Seksi Program dan Pelaksanaan Teknis, 130 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang Jembatan

Sub Bidang Spesifikasi Konstruksi

Sub-sub bidang Judul NSPM PONDASI SUMURAN

Manual Pelaksanaan Pondasi Sumuran ACI 336.1R-01: Specifications for the Construction of Drilled Piers EN 1536:1999 Execution of special geotechnical work - Bored piles

Jembatan

Spesifikasi Konstruksi

PASANGAN BATU/BATA DAN BRONJONG SNI 03-0090-1987 Bronjong dan kawat bronjong, Mutu dan cara uji SNI 03-3750-1995 Bronjong jaringan kawat baja las (JKBL) SNI 03-6154-1999 Kawat bronjong SNI 03 03-3046-1992 3046 1992 Kawat bronjong dan bronjong berlapis PVC (Polivinil chlorida) SNI 03-3760-1995 Bronjong logam bentang SNI 03-2417-1991 : Metode Pengujian Keausan Agregat Dengan Mesin Abrasi Los Angeles. AASHTO M 279-03 Metallic-Coated, Steel Woven Wire Fence Fabric AASHTO M 280-03 Metallic-Coated (Carbon) Steel Barbed Wire A951/A951M-06 Standard Specification for Steel Wire for Masonry Joint Reinforcement A974-97(2003) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated) A975-97(2003) Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (MetallicCoated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating) C90-06b Standard Specification for Loadbearing Concrete Masonry Units C129-06 Standard Specification for Nonloadbearing Concrete Masonry Units C140-06 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units C216-06 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) C279-88(2001) Standard Specification for Chemical-Resistant Masonry Units C398-98(2003) Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry C426-05 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units C744-05 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

Sub. Seksi Program dan Pelaksanaan Teknis, 131 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM C780-06 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry C1006-84(2001) Standard Test Method for Splitting Tensile Strength of Masonry Units C1072-06 Standard Test Method for Measurement of Masonry Flexural Bond Strength C1209-05e1 Standard Terminology of Concrete Masonry Units and Related Units C1232-05 Standard Terminology of Masonry C1314-03b Standard Test Method for Compressive Strength of Masonry Prisms C1324-05 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar C1357-05 Standard Test Methods for Evaluating Masonry Bond Strength C1400-01 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls C1403-05 Standard Test Method for Rate of Water Absorption of Masonry Mortars C1531-03 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index C1552-03a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing C1555-03a Standard Practice for Autoclaved Aerated Concrete Masonry C1601-06 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces C901-01 Standard Specification for Prefabricated Masonry Panels C652-05a Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale) C1386-98 Standard Specification for Precast Autoclaved Aerated Concrete (PAAC) Wall Construction Units E518-03 Standard Test Methods for Flexural Bond Strength of Masonry E519-02 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages E835/E835M-93(2002) Standard Guide for Modular Coordination of Clay and Concrete Masonry Units E1857-97(2004) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces E2265-06b Standard Terminology for Anchors and Fasteners in Concrete and Masonry 524R-04: Guide to Portland Cement-Based Plaster 530/530.1-05: (Book) Building Code Requirements and Specifications for Masonry Structures and Related Commentaries 533R-93: Guide for Precast Concrete Wall Panels (Reapproved 2004) SP-115: Reference Manual: Specifications for Masonry Structures ACI 530.1-92/ASCE 6-92/TMS 602.92, with selected ASTM Re

Sub. Seksi Program dan Pelaksanaan Teknis, 132 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Jembatan

Spesifikasi Konstruksi

Jembatan

Spesifikasi Konstruksi

Sub-sub bidang Judul NSPM PEMBONGKAR AN STRUKTUR Pedoman Pembongkaran Jembatan TURAP

Pedoman Pemasangan Turap A328/A328M-05 Standard Specification for Steel Sheet Piling JIS A 5530:2004 Steel pipe sheet piles JIS A 5528:2006 Hot rolled steel sheet piles AASHTO M 202M/ M 202-02 Steel Sheet Piling EN 12063:1999 Execution of special geotechnical work - Sheet Sheet-pile pile walls EN 14475:2006 Execution of special geotechnical works - Reinforced fill EN 14475:2006/AC:2006 Execution of special geotechnical works - Reinforced fill EN 14679:2005 Execution of special geotechnical works - Deep mixing EN 14679:2005/AC:2006 Execution of special geotechnical works - Deep mixing EN 14731:2005 Execution of special geotechnical works - Ground treatment by deep vibration EN 1537:1999 Execution of special geotechnical work - Ground anchors EN 1537:1999/AC:2000 Execution of special geotechnical work - Ground anchors EN 1538:2000 Execution of special geotechnical works - Diaphragm walls

Jembatan

Spesifikasi Konstruksi

Perancah Manual Pelaksanaan Perancah untuk Jembatan SNI 03-3631-1994 Perancah, Mutu dan cara uji tekan statis AASHTO Guide Design Specifications for Bridge Temporary Works Caltrans – Falsework Manual Caltrans – TRENCHING AND SHORING MANUAL

Sub. Seksi Program dan Pelaksanaan Teknis, 133 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM HA - BA 36/90 The Use of Permanent Formwork 347-04: Guide to Formwork for Concrete C-26: Formwork SP-4(7TH): Formwork for Concrete ASCE Temporary Structures in Construction Operations

Jembatan

Spesifikasi Konstruksi

Aliran Air Manual Pelaksanaan Pemasangan Cofferdam SNI 03-6456.1-2000 Metode Pengontrolan Sungai selama Pelaksanaan Kons truksi Bendungan Bagian 1 : Pengendalian Sungai selama Pelaksanaan Konstruksi Bendungan SNI 03-6456.2-2000 Metode Pengontrolan Sungai Selama Pelaksanaan Kons-truksi Bendungan Bagian 2 : Penutupan Alir Sungai dan Bendungan Pengelak SNI 19-6471.1-2000 Tata cara pengerukan muara sungai dan pantai. Bagian 1 : Survei lokasi dan investasi SNI 19-6471.2-2000 Tata cara pengerukan muara sungai dan pantai. Bagian 2 : Pertimbangan-pertimbangan yang mempengaruhi pekerjaan SNI 19-6471.3-2000 Tata cara pengerukan muara sungai dan pantai. Bagian 3 : Pemilihan peralatan SNI 19-6471.4-2000 Tata cara pengerukan muara sungai dan pantai. Bagian 4 : Pelaksanaan dan pengawasan C915-79(2002) Standard Specification for Precast Reinforced Concrete Crib Wall Members

Jembatan

Peralatan Konstruksi

SNI 03-6862-2002 Spesifikasi Peralatan Pemasangan Dinding Bata Dan Plesteran. SNI 04-7045-2004 Mesin las busur listrik SNI 05-3804-1995 Pemotong pipa SNI 03-0739-1989 Kelengkapan baku loader SNI 03-0740-1989 Kelengkapan baku ekskavator darat SNI 03-0846-1989 Penamaan dan isian spesifikasi loader SNI 03-0847-1989 Ekskavator darat hidrolik, Penamaan dan spesifikasi

Sub. Seksi Program dan Pelaksanaan Teknis, 134 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 03-0961-1989 SNI 03-0963-1989 SNI 03-0965-1989 SNI 03-1646-1989 SNI 03-1647-1989 SNI 05-0745-1989 SNI 05-1370-1989 SNI 05-1873-1990 SNI 05-2955-1992 SNI 05-3047-1992 SNI 05-3291-1994 SNI 05-3292-1994 SNI 05-3293-1994 SNI 05 05-3294-1994 3294 1994 SNI 05-3295-1994 SNI 05-3296-1994

Peralatan besar darat, Cara menentukan titik pusat gravitasi Ekskavator darat hidrolik, Cara uji unjuk kerja Cara uji unjuk kerja loader Alat besar swa-gerak, Cara menentukan titik acuan tempat duduk Alat besar swa-gerak, Cara menentukan titik indek tempat duduk dan titik pinggul Pipa layer, Kelengkapan baku Mesin kran swagerak, Daftar istilah Mesin kran swa-gerak, Penamaan dan isian spesifikasi Mesin kran swagerak, Kelengkapan baku Sabuk berjalan, Spesifikasi dan cara konduktivitas listrik Kran mobil - Penerapan stabilitas Kran - Kode dari prosedur uji Kran - Perhitungan beban angin Kran dan pesawat angkat - Klasifikasi, Bag.1 : Umum Kran dan pesawat angkat - Pemeliharaan tali kawat baja. Bagian 1 : Umum Kran dan pesawat angkat - Karakteristik teknis dan dokumen dukungan

SNI 05-3297-1994 Pesawat angkat - Pengendalian - Tata letak dan karakteristik. Bagian 1 : Prinsip umum SNI 05-3298-1994 Pesawat angkat - Pengendalian - Tata letak dan karakteristik. Bag.2 : Persyaratan dan aturan dasar untuk kran mobil. Seksi 2 : Perubahan menyilang - Pengendalian arah - Susunan kendali dasar dan arah SNI 05-3299-1994 Pesawat angkat - Pengendalian - Tata letak dan karakteristik Bagian 5 : Kran - jalan atas dan kran jembatan portal SNI 05-3300-1994 Pesawat angkat - Kisaran kapasitas maksimum untuk model dasar SNI 05-3301-1994 Perlengkapan penanganan mekanis kontinu, Peraturan desain - Konveyor apron SNI 05-3302-1994 Mesin angkat mekanik kontinyu material curah. Konveyor ulir Peraturan desain untuk daya gerak SNI 05-3303-1994 Alat pindah mekanik kontinyu - Baket elevator vertikal dengan rantai baja yang dikalibrasi Karakteristik 030/T/BM/1996 Petunjuk pemeriksaan peralatan pemecah batu Jembatan

Peralatan Konstruksi 030A/T/BM/1996 Buku pemeriksaan peralatan pemecah batu SNI 05-3345-1994 Sabuk berjalan SNI 09-0741-1989 Kelengkapan baku motor scraper SNI 09-0742-1989 Skidder, Kelengkapan baku

Sub. Seksi Program dan Pelaksanaan Teknis, 135 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SNI 09-0743-1989 Kelengkapan baku motor grader SNI 09-0744-1989 Kelengkapan baku buldoser SNI 09-0848-1989 Motor grader, Penamaan dan isian spesifikasi SNI 09-0849-1989 Penamaan dan isian spesifikasi buldoser SNI 09-0964-1989 Traktor rantai kelabang, Cara uji unjuk kerja SNI 09-0966-1989 Cara uji unjuk kerja motor grader SNI 09-1214-1989 Mesin pengangkat/pengukit bergarpu (forklift), Kelengkapan baku SNI 09-1215-1989 Mesin pengangkat/pengungkit bergarpu (forklift), Penamaan dan isian spesifikasi SNI 09-1219-1989 Spesifikasi ukuran lubang pisau dan pisau ujung alat gusur buldoser SNI 09-1220-1989 Cara uji alat gusur pada buldoser rantai kelabang SNI 09-1221-1989 Ukuran dasar batang hela buldoser rantai kelabang SNI 09-1222-1989 Ukuran dasar rantai kelabang buldoser SNI 09-1368-1989 Mesin pengangkat bergarpu beban imbang, Cara uji keseimbangan SNI 09 09-1369-1989 1369 1989 Mesin pengangkat/pengungkit bergarpu, Cara uji unjuk kerja SNI 09-1371-1989 Mesin pengangkat/pengungkit bergarpu, Cara uji ukuran utama SNI 09-1468-1989 Sangkutan dan pengungkit garpu forklift, Ukuran SNI 09-2954-1992 Garpu forklif, Hubungan tegangan statis dan spesifikasi dimensi SNI 09-2956-1992 Pelindung operator forklit, Spesifikasi dan cara uji SNI 19-4127-1996 Bahasa isyarat pengoperasian pesawat angkat (crane) SNI 05-0378-1989 Mata bor untuk kayu SNI 05-1595-1989 Mata serut kayu SNI 03-4960-1999 Syarat konstruksi mesin aduk beton model horisontal SNI 09-1075-1989 Dump truck, Kelengkapan SNI 09-1076-1989 Dump truck, Penamaan dan isian spesifikasi EN 1004:2004 Mobile access and working towers made of prefabricated elements - Materials, dimensions, design loads, safety and performance requirements EN 1065:1998 Adjustable telescopic steel props - Product specifications, design and assessment by calculation and tests EN 1263-1:2002 Safety nets - Part 1: Safety requirements, test methods EN 1263-2:2002 Safety nets - Part 2: Safety requirements for the positioning limits EN 12810-1:2003 Façade scaffolds made of prefabricated components - Part 1: Products specifications EN 12810-2:2003 Façade scaffolds made of prefabricated components - Part 2: Particular methods of structural design EN 12811-1:2003 Temporary works equipment - Part 1: Scaffolds - Performance requirements and general design EN 12811-2:2004 Temporary works equipment - Part 2: Information on materials

Sub. Seksi Program dan Pelaksanaan Teknis, 136 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM EN 12811-3:2002 Temporary works equipment - Part 3: Load testing EN 12811-3:2002/AC:2004 Temporary works equipment - Part 3: Load testing EN 12812:2004 Falsework - Performance requirements and general design EN 12813:2004 Temporary works equipment - Load bearing towers of prefabricated components - Particular methods of structural desi EN 1298:1996 Mobile access and working towers - Rules and guidelines for the preparation of an instruction manual EN 13331-1:2002 Trench lining systems - Part 1: Product specifications EN 13331-2:2002 Trench lining systems - Part 2: Assessment by calculation or test EN 13374:2004 Temporary edge protection systems - Product specification, test methods EN 13377:2002 Prefabricated timber formwork beams - Requirements, classification and assessment EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications EN 14653-2:2005 14653 2:2005 Manually operated hydraulic shoring systems for groundwork support - Part 2: Assessment by calculation or test EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes Requirements and test procedures

ISO 669:2000 Resistance welding -- Resistance welding equipment -- Mechanical and electrical requirements ISO 693:1982 Dimensions of seam welding wheel blanks ISO 865:1981 Slots in platens for projection welding machines ISO 1089:1980 Electrode taper fits for spot welding equipment -- Dimensions ISO 2503:1998 Gas welding equipment -- Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar ISO 3253:1998 Gas welding equipment -- Hose connections for equipment for welding, cutting and allied processes ISO 3821:1998 Gas welding equipment -- Rubber hoses for welding, cutting and allied processes ISO 5171:1995 Pressure gauges used in welding, cutting and allied processes ISO 5172:2006 Gas welding equipment -- Blowpipes for gas welding, heating and cutting -- Specifications and tests ISO 5175:1987 Equipment used in gas welding, cutting and allied processes -- Safety devices for fuel gases and oxygen or compressed air -- General specifications, requirements and tests ISO 5183-1:1998 Resistance welding equipment -- Electrode adaptors, male taper 1:10 -- Part 1: Conical fixing, taper 1:10

Sub. Seksi Program dan Pelaksanaan Teknis, 137 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 5183-2:2000 Resistance spot welding -- Electrode adaptors, male taper 1:10 -- Part 2: Parallel shank fixing for end-thrust electrodes ISO 5821:1979 Resistance spot welding electrode caps ISO 5822:1988 Spot welding equipment -- Taper plug gauges and taper ring gauges ISO 5826:1999 Resistance welding equipment -- Transformers -- General specifications applicable to all transformers ISO 5827:1983 Spot welding -- Electrode back-ups and clamps ISO 5828:2001 Resistance welding equipment -- Secondary connecting cables with terminals connected to watercooled lugs -- Dimensions and characteristics ISO 5829:1984 Resistance spot welding -- Electrode adaptors, female taper 1 : 10 ISO 5830:1984 Resistance spot welding -- Male electrode caps ISO 6210-1:1991 Cylinders for robot resistance welding guns -- Part 1: General requirements ISO 7284:1993 Resistance welding equipment -- Particular specifications applicable to transformers with two separate secondary windings for multi multi-spot spot welding, as used in the automobile industry ISO 7285:1995 Pneumatic cylinders for mechanized multiple spot welding ISO 7286:1986 Graphical symbols for resistance welding equipment ISO 7287:2002 Graphical symbols for thermal cutting equipment ISO 7289:1996 Quick-action couplings with shut-off valves for gas welding, cutting and allied processes ISO 7291:1999 Gas welding equipment -- Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar ISO 7292:1997 Flowmeter regulators used on cylinders for welding, cutting and allied processes -- Classification and specifications ISO 7931:1985 Insulation caps and bushes for resistance welding equipment ISO 8166:2003 Resistance welding -- Procedure for the evaluation of the life of spot welding electrodes using constant machine settings ISO 8167:1989 Projections for resistance welding ISO 8205-1:2002 Water-cooled secondary connection cables for resistance welding -- Part 1: Dimensions and requirements for double-conductor connection cables ISO 8205-2:2002 Water-cooled secondary connection cables for resistance welding -- Part 2: Dimensions and requirements for single-conductor connection cables ISO 8205-3:1993 Water-cooled secondary connection cables for resistance welding -- Part 3: Test requirements ISO 8206:1991 Acceptance tests for oxygen cutting machines -- Reproducible accuracy -- Operational characteristics ISO 8207:1996 Gas welding equipment -- Specification for hose assemblies for equipment for welding, cutting and allied processes

Sub. Seksi Program dan Pelaksanaan Teknis, 138 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 8430-1:1988 Resistance spot welding -- Electrode holders -- Part 1: Taper fixing 1:10 ISO 8430-2:1988 Resistance spot welding -- Electrode holders -- Part 2: Morse taper fixing ISO 8430-3:1988 Resistance spot welding -- Electrode holders -- Part 3: Parallel shank fixing for end thrust ISO 8430-3:1988/Cor 1:1990 ISO 9012:1998 Gas welding equipment -- Air-aspirated hand blowpipes -- Specifications and tests ISO 9090:1989 Gas tightness of equipment for gas welding and allied processes ISO 9312:1990 Resistance welding equipment -- Insulated pins for use in electrode back-ups ISO 9313:1989 Resistance spot welding equipment -- Cooling tubes ISO 9539:1988 Materials for equipment used in gas welding, cutting and allied processes ISO 10656:1996 Electric resistance welding -- Integrated transformers for welding guns ISO 10656:1996/Cor 1:2000 ISO 12145:1998 Resistance welding equipment -- Angles for mounting spot welding electrodes ISO 12166:1997 Resistance welding equipment -- Particular specifications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry ISO 12170:1996 Gas welding equipment -- Thermoplastic hoses for welding and allied processes ISO 14112:1996 Gas welding equipment -- Small kits for gas brazing and welding ISO 14113:1997 Gas welding equipment -- Rubber and plastic hoses assembled for compressed or liquefied gases up to a maximum design pressure of 450 bar ISO 14114:1999 Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -General requirements ISO 14744-1:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 1: Principles and acceptance conditions ISO 14744-2:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 2: Measurement of accelerating voltage characteristics ISO 14744-3:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 3: Measurement of beam current characteristics ISO 14744-4:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 4: Measurement of welding speed ISO 14744-5:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 5: Measurement of run-out accuracy ISO 14744-6:2000 Welding -- Acceptance inspection of electron beam welding machines -- Part 6: Measurement of stability of spot position ISO 15012-1:2004 Health and safety in welding and allied processes -- Requirements testing and marking of equipment for air filtration -- Part 1: Testing of the separation efficiency for welding fume ISO 15296:2004 Gas welding equipment -- Vocabulary -- Terms used for gas welding equipment

Sub. Seksi Program dan Pelaksanaan Teknis, 139 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM ISO 15615:2002 Gas welding equipment -- Acetylene manifold systems for welding, cutting and allied processes -Safety requirements in high-pressure devices ISO 15616-1:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 1: General principles, acceptance conditions ISO 15616-2:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 2: Measurement of static and dynamic accuracy ISO 15616-3:2003 Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 3: Calibration of instruments for measurement of gas flow and pressure ISO/TS 17477:2003 Acceptance tests for CO2-laser beam machines for welding and cutting using 2D moving optics type ISO 17662:2005 Welding -- Calibration, verification and validation of equipment used for welding, including ancillary activities ISO 22827-1:2005 Acceptance tests for Nd:YAG laser beam welding machines -- Machines with optical fibre delivery -- Part 1: Laser assembly ISO 22827-2:2005 Acceptance tests for Nd:YAG laser beam welding machines -- Machines with optical fibre delivery -- Part 2: Moving mechanism ISO 8028:1999 Rubber and/or plastics hoses and hose assemblies for airless paint spraying -- Specification ISO 3861:2005 Rubber hoses for sand and grit blasting -- Specification

Jembatan

Pengawasan Panduan Pengawasan Teknik Jembatan SSPC-QP COM, Commentary on Qualification Procedures SSPC-QP 1, Standard Procedure for Evaluating Painting Contractors (Field Application to Complex Industrial Structures) SSPC-QP 2, Standard Procedure for the Qualification of Painting Contractors (Field Removal of Hazardous Coatings from Complex Structures) SSPC-QP 3, Standard Procedure for Evaluating Qualifications of Shop Painting Applicators SSPC-QP 4, Standard Procedure for Evaluating the Qualifications of Contractors Disturbing Hazardous Coatings During Demolition and Repair Work SSPC-QP 5, Standard Procedure for Evaluating the Qualifications of Coating and Lining Inspection Companies SSPC-QP 6, Standard Procedure for Evaluating the Qualifications of Contractors Who Apply Thermal Spray (Metallizing) for Corrosion Protection of Steel and Concrete Structures SSPC-QP 7, Procedure for Evaluating Painting Contractors with Limited Industrial Work Experience

Sub. Seksi Program dan Pelaksanaan Teknis, 140 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan

RANCANGAN POHON STANDAR KONSTRUKSI JEMBATAN DAN BANGUNAN PELENGKAP JALAN UNTUK SEKSI KONSTRUKSI JEMBATAN

Bidang

Sub Bidang

Sub-sub bidang Judul NSPM SSPC-QP 8, Standard Procedure for Evaluating the Qualifications of Contracting Firms That Install Polymer Coatings and Surfacings on Concrete and Other Cementitious Substrates SSPC-QS 1, Standard Procedure for Evaluating a Contractor's Advanced Quality Management System Back CEB – FIP : Quality management systems for post-tensioned concrete structures according to ISO 9001 CEB – FIP Qualification and approval of prestressing contractors and system suppliers 121R-04: Quality Management System for Concrete Construction 363.2R-98: Guide to Quality Control and Testing of High-Strength Concrete ASCC105: The Contractor's Guide to Quality Concrete Construction - Third Edition C-16: Quality Assurance in Concrete Construction C-38: Quality in Concrete Construction SP-229: SP 229: Quality of Concrete Structures and Recent Advances in Concrete Materials and Testing ASCE Introduction to Engineering Construction Inspection (Hardcover)

Sub. Seksi Program dan Pelaksanaan Teknis, 141 / 141

Balai Jembatan dan Bangunan Pelengkap Jalan