Lesson Plan Ahe

ERODE SENGUNTHAR ENGINEERING COLLEGE THUDUPATHI , ERODE 638 057 DEPARTMENT OF CIVIL ENGINEERING LESSON PLAN NAME OF THE SUBJECT WITH SUBJECT CODE : CE1253 APPLIED HYDRAULIC ENGINEERING COURSE COORDINATOR : K.SHUNMUGA PRIYA ACADEMIC YEAR

: 2007 - 08

SEMESTER AND BRANCH: IV SEMESTER CIVIL

S.No

Date

1 2 3 4 5 6 7 8 9 10 11

02.01.08 03.01.08 04.01.08 05.01.08 07.01.08 08.01.08 09.01.08 10.01.08 11.01.08 16.01.08 17.01.08

12 13 14 15 16 17 18 19 20 21 22

18.01.08 19.01.08 21.01.08 22.01.08 23.01.08 24.01.08 25.01.08 28.01.08 29.01.08 30.01.08 31.01.08

Topics to be covered UNIT I OPEN CHANNEL FLOW Open channel flow – Types and regimes of flow Velocity distribution in open channel Velocity distribution in open channel Wide open channel Wide open channel Specific energy Specific energy Critical flow and its computation. Problems Problems Test UNIT II UNIFORM FLOW Uniform flow Velocity measurement – Manning’s and Chezy’s formula Determination of roughness coefficients Determination of roughness coefficients Determination of normal depth and velocity Most economical sections Most economical sections Non-erodible channels Problems Problems Problems

No.of Hours 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

23 24

04.02.08 05.02.08

Problems Test

1 1

29 30 31 32 33 34 35 36 37 38

12.02.08 13.02.08 14.02.08 15.02.08 16.02.08 18.02.08 19.02.08 26.02.08 27.02.08 28.02.08

39 40 41 42 43 44 45 46 47

29.02.08 01.03.08 03.03.08 04.03.08 05.03.08 06.03.08 07.03.08 10.03.08 11.03.08

UNIT III VARIED FLOW Dynamic equations of gradually varied flow – Assumptions Characteristics of flow profiles Draw down and back water curves Profile determination- Graphical integration, direct step and standard step method Flow through transitions Flow through transitions Hydraulic jump – Types Hydraulic jump – Types Energy dissipation. Surges – Surge channel transitions. Problems Problems Problems Test UNIT IV TURBINES Turbines - draft tube and cavitations Application of momentum principle Application of momentum principle Impact of jets on plane and curved plates Impact of jets on plane and curved plates Turbines - classification Radial flow turbines Radial flow turbines Axial flow turbines – Impulse and Reaction

48 49 50 51 52

12.03.08

Axial flow turbines – Impulse and Reaction

13.03.08 14.03.08 15.03.08 20.03.08

Problems Problems Problems Test

1 1 1 1 1

24.03.08 25.04.08 26.03.08 27.03.08 28.03.08 29.03.08 31.03.08 01.04.08

UNIT V PUMPS Centrifugal pump - minimum speed to start the pump Multistage Pumps Jet and submersible pumps Positive displacement pumps Reciprocating pump - negative slip Flow separation conditions Air vessels -indicator diagram and its variation Air vessels -indicator diagram and its variation.

1 1 1 1 1 1 1 1

25 26 27 28

53 54 55 56 57 58 59 60

06.02.08 07.02.08 08.02.08 11.02.08

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

61 62 63 64 65

02.04.08

Savings in work done - rotary pumps.

03.04.08 04.04.08 05.04.08 07.04.08

Problems Problems Problems Test

1

Total No of hours prescribed in the syllabus

1 1 1 1 65 60

TENTATIVE DATES OF EVENTS Reopening Date :02.01.2008 Last working day :28.04.2008 Performance test-1 :20.02.2008 to 22.02.2008 (Portions Unit – I & II) Performance test-1I :17.03.2008 to 19.03.2008 (Portions Unit – III & IV) Model Exam :19.0402008 to 25.04.2008 (Portions All Units) TEXT BOOKS 1.

2.

Subramanya K., "Flow in Open channels", Tata McGraw-Hill Publishing Company, 1994. Kumar K.L., "Engineering Fluid Mechanics", Eurasia Publishing House (P) Ltd., New Delhi, (7th Edition), 1995.

REFERENCE 1.

Jain A.K., "Fluid Mechanics (including Hydraulic Machines)", Khanna Publishers, 8th edition, 1995.

2.

Ranga Raju, K.G., “Flow through Open Channels”, Tata McGraw-Hill, 1985

Signature of the course coordinator

Head of the Department

Principal

ERODE SENGUNTHAR ENGINEERING COLLEGE THUDUPATHI , ERODE 638 057 DEPARTMENT OF CIVIL ENGINEERING LESSON PLAN NAME OF THE SUBJECT WITH SUBJECT CODE : CE 1252 STRENGTH OF MATERIALS COURSE COORDINATOR : K.RAJAGOPALAN ACADEMIC YEAR

: 2007 - 08

SEMESTER AND BRANCH: IV SEMESTER CIVIL S.No

1 2 3 4

Date

02.01.08 03.01.08 04.01.08 05.01.08

Topics to be covered UNIT I Energy Principles Introduction to strength of materials Strain energy & Strain energy density Strain energy in Axial force Strain energy in Shear and Flexure

No.of Hours 1 1 1 1

5 6 7 8 9 10 11 12 13

07.01.08 08.01.08 09.01.08 10.01.08 12.01.08 18.01.08 19.01.08 21.01.08 22.01.08

14 15 16 17 18 19 20 21 22 23 24 25 26

23.01.08 24.01.08 28.01.08 29.01.08 30.01.08 31.01.08 04.02.08 05.02.08 06.02.08 07.02.08 11.02.08 12.02.08 13.02.08

27 28 29 30 31 32 33 34 35 36 37 38

14.02.08 15.02.08 18.02.08 19.02.08 25.02.08 26.02.08 27.02.08 28.02.08 01.03.08 03.03.08 04.03.08 05.03.08

39 40 41 42 43 44

06.03.08 10.03.08 11.03.08 12.03.08 13.03.08 14.03.08

Strain energy in torsion – Castigliams’s theorems Principle of virtual work Problem Deflection of truss Problem Deflection in Beams Problem Maxwell reciprocal theorem Problem UNIT II Indeterminate beams Propped cantilever Problem Fixed Beams Problem Theorem of three moments Analysis of Continuous beams Problem Problem Slope and Deflection of Continuous Beams Problem Problem Problem Problem UNIT III Columns Eccentrically loaded short column Middle third rule – core section Columns of unsymmetrical section Problem Problem Euler’s Theory of Long Columns Critical load for Prismatic Columns Problem Rankine Gordon formula Thick Cylinder Compound Cylinder Problem UNIT IV State of Stress in three dimensions Stress tension Determination of principles stress Determination of principles planes Volumetric strain & Dilation - distortion Problem Theories of failure

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

45 46 47 48 49 50

20.03.08 24.03.08 25.03.08 26.03.08 27.03.08 28.03.08

51 52 53 54 55 56 57 58 59 60 61 62 63

31.03.08 01.04.08 02.04.08 03.04.08 04.04.08 05.04.08 08.04.08 09.04.08 10.04.08 14.04.08 15.04.08 16.04.08 18.04.08

Strain energy and Distortion energy theories Load carrying capacity and design of members Problem Interaction problem & Curves Residual stress Problem UNIT V Advanced topics in bending of beams Unsymmetrical bending Symmetrical & Unsymmetrical Section Curved Beams Winkler Bach formula Problem Problem Stress Concentration Problem Problem Fatigue Problem Fracture Problem

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

TEXT BOOKS 1. Theory of Structures, B.C.Punmia., Ashok Kumar Jain & Arun Kumar Jain , Laximi Publication REFERENCE 1.Analysis of Structures, V.N.Vazirani & M.M.Ratwani, Khanna Publication. 2.Fundamentals of Structural Analysis (With computer analysis & applications)., Sujit Kumar Roy & Subrata Chakrabarty., S.chand & Company Ltd.,

Signature of the course coordinator

Head of the Department

Principal