Guidelines For Preparing Project Report

Guidelines for preparing project report 1.0 Project report should be organized under the following headings

a. Title page: Should contain the title of the project, name of the project group, nature of the project, area of application and names of the guides. (Refer sample page attached)

b. Acknowledgement c.Introduction:

Reason for selection of subject, broad outline of the product with specification and organization of the report.

d. System design: Hardware, software, PCB, Transformer, heat sinks, enclosures and interconnections.

e. Conclusion and self evaluation: The result achievement project work should be discussed in respect of the following: 1. Achievement and short falls in relation to the objectives 2. Reason for shortfalls 3. Mention the problems encountered and overcome 4. Application of the results of the project work 5. Recommendations for further work/modification

f. User’s manual and service manual shall be prepared. 2.0 Refer sample certificate for the report attached. 3.0 Following specifications to be followed in the formatting of the content of the report

(SEE SAMPLE PAGE ATTACHED) . . . . .

Font type: Verndana Heading: Font size: 16, BOLD Subheading: Font size: 14, BOLD Body text: Font size: 12, NORMAL All pages should have an out line

.

Header should have following information like -Name of the project at extreme right.

.

Footer should have following information like Diploma in Mechatronics at left most

FORMAT FOR PROJECT REPORT Paper size Left margin Right margin Top margin Bottom margin Page number location Cover page Title page Certificate Synopsis Acknowledgment Contents pages Introduction

: : : : : : : : : : : :

Page1 Page2 Page3 Page4 Page 5 onwards Briefly describe the overall picture and then introduce the project indicating the present, the need and scope and why : Aim / objective scope Target-project boundary : Activity / limitations, if any : Data collection, analysis -company profile -project relevance -relevant literature survey -customer’s requirments -design alternatives -tool design steps -material selection -design calculation -tool manufacturing process -cost estimation -conclusion -assembly drawings -bill of materials / parts lists -sub-assembly / component drawing -photographs

Project brief Project target Project details

Others

A4 35mm 25mm 25mm 25mm Right hand side bottom corner

: : :

Glossary of item Enclosures References

NETTUR TECHNICAL TRAINING FOUNDATION

Certificate This is to certify that the project titled

SOLAR POWERED INVERTER is a bonafide record of the project work done by SHERIN LAL SMARTIN JOSE MANIKANDAN ARUN SIVARAMAN

in partial fulfillment of the requirement for the award of

Diploma in Mechatronics under the institution Nettur Technical Training Foundation, Coimbatore Training Centre, during the Academic year 2007 – 2008.

PROJECT GUIDE

EXTERNAL EXAMINER

PRINCIPAL

NETTUR TECHNICAL TRAINING FOUNDATION

PROJECT REPORT ON

SOLAR POWERED INVERTER PROJECT DONE BY SHERIN LAL SMARTIN JOSE MANIKANDAN ARUN SIVARAMAN

DIPLOMA IN MECHATRONICS NTTF TECHNICAL TRAINING CENTRE At GKDITR CAMPUS, SANGOTHIPALAYAM ARASUR. P.O., COIMBATORE – 641 407

2005 - 2008