1998 Ford Mustang Axle Ratio and Tooth Combinations 3.8L Axle ratio (or overall top gear 2.73:1 ratio)
4.6L (SOHC) and 4.6L (DOHC) 2.73:1
3.08:1
3.27:1
Ring gear o.d.
198.1 (7.5)
223.5 (8.8)
223.5 (8.8)
223.5 (8.8)
No. of Teeth - Pinion
15
15
13
11
No. of teeth - Ring gear
41
41
40
36
Rear Axle Unit Description (integral to trans., etc.) Limited slip differential (type) Drive pinion - Type
Regular Axle Traction-Lok Axle Semi-Floating Type with Cast Semi-Floating Type with Cast Center and Underhung Pinion Center and Underhung Pinion N/A
Friction plate
Hypoid
Hypoid
Drive Pinion - Offset
25.4 (1.0)
38.1 (1.5)
No. of differential pinions
2
2
Pinion/Differential Shim Adjustment (shim, etc.) Pinion/Differential - Bearing Collapsible Spacer, Shim adjustment Driving wheel bearing (type) Straight Roller
Shim Collapsible Spacer, Shim Straight Roller
Lubricant - Capacity L (pt.)
1.6 (3.3)
1.8 (3.75)
Lubricant - type recommended
WSP-M2C 197-A, SAE 80 W WSP-M2C 197-A, SAE 80 W 90, GL-5 90, GL-5 Add 2 oz. M2C 196-A Friction Modifier
Propeller Shaft - Rear Wheel Drive 3.8L Manufacturer Type (straight tube, tube-in- Ford straight tube with tube, internal-external damper, etc.) internal tuned damper
4.6L (SOHC) and 4.6L (DOHC) Ford straight tube with internal tuned damper
Manual 4-Speed transmission
N/A
Manual 5-Speed transmission
88.9 x 1163 x 1.65 (3.50 88.9 x 1163 x 1.65 (3.50 x 45.6 x 0.065) x 45.6 x 0.065)
Manual 6-Speed transmission Overdrive
N/A N/A
Automatic Transmission 4-Speed, AODE
88.9 x 1163 x 1.65 (3.50 88.9 x 1163 x 1.65 (3.50 x 45.6 x 0.065) x 45.6 x 0.065)
Intermediate bearing - Type (plain, antifriction) Intermediate bearing - Lubrication (fitting, prepack)
N/A
N/A N/A
N/A
N/A
N/A
N/A
Slip Yoke - Type
Damper
Plain w/ MT; Damper w/ AT
Slip Yoke - Number of teeth
28
31
Slip Yoke - Spline o.d.
38.05 (1.498)
38.05 (1.498)
Ford 1330
Ford 1330
Ford 1330
Ford 1330
2
2
Cross
Cross
Circular Flange
Circular Flange
Needle Roller
Needle Roller
Pre-pack
Pre-pack
Universal Joints - Make and mfg. no. Front Universal Joints - Make and mfg. no. Rear Universal Joints - No. used Universal Joints - Type (ball and trunion, cross) Universal Joints - Rear attatch (u-bolt, clamp, etc.) Universal Joints - Bearing Type (plain, anti-friction) Universal Joints - Bearing Lubrication (fitting, prepack) Drive taken through (torque tube, arms or springs) Torque taken through (torque tube, arms or springs)
Control Arms Control Arms