Correas En Curva .pdf

Product-Range Industrial Belts

Contents Page ,

4

optibelt

optibelt

optibelt

General Introduction

5

optibelt-SK

Wedge Belts to BS 3790 and DIN 7753 Part 1

6–8

Wedge Belts USA-Standard RMA/MPTA

9

optibelt RED POWER Wedge Belts to BS 3790, DIN 7753 Part 1

10–11

Wedge Belts USA-Standard RMA/MPTA

12

optibelt-VB

V-Belts to BS 3790 and DIN 2215

13–19

optibelt-VB/LC

V-Beltslight coloured cover fabric

19

optibelt-LD

Light Duty V-belts to USA-Standard RMA/MPTA

19

Moulded Cogged Raw Edge Wedge Belts

20–23

Moulded Cogged Raw Edge V-Belts

24–25

Moulded Cogged Raw Edge Variable Speed Belts

26–33

Kraftbands with Wedge Belts

34–36

optibelt RED POWER Kraftbands with Wedge Belts

37–38

optibelt-KB

39–40

optibelt-KB

Kraftbands with Classical V-Belts

optibelt-KBX

Kraftbands with Moulded Cogged Raw Edge Wedge Belts 41

optibelt-PKR

Endless V-Belts with Patterned Top Surfaces

42

optibelt-KB

Kraftbands with Special Top Surfaces

43

optibelt-ZR

Timing Belts

44–52

optibelt-ZR D

Double Timing Belts

52–53

optibelt OMEGA

Timing Belts Omega A

54–59

optibelt OMEGA

Timing Belts Omega B

60–66

optibelt-HTD®

Double Timing Belts

67–72

optibelt-HTD® D

Double Timing Belts

73

optibelt-STD

Timing Belts

74–76

2

Contents Page

optibelt-ZR

Ended Timing Belts made of Chloroprene

77

optibelt-HTD®

Ended Timing Belts made of Chloroprene

77

optibelt-ZRM

Polyurethane Timing Belts, metric

78–90

optibelt-ZRM D

Polyurethane Double Timing Belts, metric

91–94

optibelt-ZRP

Polyurethane Timing Belts

95–98

optibelt-ZRL

Open Ended or Joined Endless Polyurethane Timing Belts

99–102

optibelt-CP

Clamping Plates for Open Ended Polyurethane Timing Belts 103–104

optibelt-RB

Ribbed Belts

105–107

optibelt-DK

Double V-Belts

108–109

optibelt-KK

Polyurethane V-Belting V-Belting with Special Top Surfaces V-Belting with Profiled Carrying Surfaces

110 110 110

optibelt-RR

Polyurethane Round Section Belting

110

Splicing Tools

111

optimat-OE

Open Ended V-Belting DIN 2216, Punched

112

optimat-DK

Open Ended Double V-Belting, Punched

112

optimat-FK

Open Ended Conveyor Belting, Punched

113

optimat-PKR

Open Ended V-Belting DIN 2216 with Special Top Surfaces114

optibelt-LB

Link Belting

114

optibelt-RF

Rubber Covered Flat Belting Type B 50

115

optibelt-CF

Cable Cord Flat Belting

116

optimax-HF

High Capacity Flat Belts

117–118

optibelt-WR

Polyurethane Wide Angle Belts (60°)

119–120

optibelt

Technical Information

121–122

optibelt

Pulleys

123

optibelt

Technical Accessories

124 3

optibelt Power Transmission for perfectionists

The bearer of performance

Optibelt S=C plus and Optibelt Super TX M=S – two ways to reach one goal. Two completely different constructions: the one wrapped, individually made, piece by piece vulcanised in rotation with a know-how which has continuously been improved for many years. Raw Edged the other, representing a new generation. Nevertheless, they have very much in common. Both belt types are being used in the general machine building industry and both are made for optimum performance of users. They are the champions in their range. Optibelt S=C plus – Power Transmission for perfectionists

Optibelt Super TX M=S – the bearer of performance

Twenty years of continuous development have made a V-Belt which cannot be more precise. The expression S=C plus has become a synonym for absolute use in matched sets. Machines of every kind are equipped worldwide with Optibelt S=C plus, in every location where specific requirements are demanded.

The Super TX M=S is unrestrictedly usable in matched sets, too. An efficiency of 97 % allows high transmission of power. Like for the S=C plus the highly precise manufacturing process and the matured material technology provide for closest tolerances. The Optibelt Super TX M=S meets all valid standards worldwide for V-Belt sets.

Why this is so is shown by the following tolerance list.

Comparison of tolerance of Optibelt S=C plus versus BS, DIN and RMA/MPTA Standards Wedge Belts to BS 3790 and DIN 7753 Part 1 Section SPZ Section SPA Section SPB Section SPC

from 1212 up to 4500 mm Li from 1207 up to 4500 mm Li from 1250 up to 10000 mm Li from 2000 up to 10000 mm Li

V-Belts to BS 3790 and DIN 2215

Section Z/10 Section A/13 Section B/17 Section 20 Section C/22 Section 25 Section D/32 Section E/40

from 1550 up to 4500 mm Li from 1200 up to 10000 mm Li from 1200 up to 10000 mm Li from 1250 up to 10000 mm Li from 1200 up to 10000 mm Li from 1400 up to 10000 mm Li from 2000 up to 10000 mm Li from 3000 up to 10000 mm Li

V-Belt Datum length Lw/Lp (mm)

S=C plus Tolerances (mm)

> 1200 ≤ 2000 > 2000 ≤ 5000 > 5000 ≤ 8000 > 8000 ≤ 10000

±2 ±2 ±4 ±6

V-Belt Inside length Li (mm)

S=C plus Tolerances (mm)

Acceptable DIN-Tolerances (mm)

> 1200 ≤ 1600 > 1600 ≤ 2000 > 2000 ≤ 2500 > 2500 ≤ 3150 > 3150 ≤ 4000 > 4000 ≤ 5000 > 5000 ≤ 6300 > 6300 ≤ 8000 > 8000 ≤ 10000

±2 ±2 ±2 ±2 ±2 ±2 ±4 ±4 ±6

+ 23/ –11 + 27/ –13 + 31/ –16 + 37/ –18 + 44/ –22 + 52/ –26 + 63/ –32 + 77/ –38 + 93/ –46

Acceptable DIN-Tolerances (mm) ± 1 % 12,5 ± 1 % 20 ± 1 % 50 ± 1 % 80

to 20 mm to 50 mm to 80 mm to 100 mm

Wedge Belts to USA-Standard RMA/MPTA Section 3V/ 9N from 3V 500 up to 3V 1400 Section 5V/15N from 5V 500 up to 5V 3550 Section 8V/25N from 8V 1000 up to 8V 3750

The extremely positive ratio between standard and Optibelt tolerances is also applicable to these sections. Please take exact data from our technical literature.

These are your Advantages: + Closest tolerances – unrestricted use in matched sets + Energy saving operation

+ Reduced vibration + Extended maintenance intervals + Longer belt life

= optibelt V-Belts 4

General Introduction

Special Constructions

Abbreviations

All Optibelt V-Belts are manufactured with carefully chosen raw materials utilising continually updated manufacturing methods. The modernisation of production processes, large scale laboratory testing, and the careful control of the basic materials will guarantee a consistent quality for every Optibelt power transmission component. Product function, efficiency and durability are of major importance to Optibelt.

The following are examples of surcharges applicable to special construction. Smooth running - LR 20% Extra oil resistant - XOR 20% Extra heat resistant - XHR 20% V-Belts with Patterned Top Surface - PKR 200% Prices for other constructions on request. Observance of special tolerances will be charged according to actual cost.

Li = Inside length La = Outside length Lp = Pitch length Ld = Datum length

Characteristics Oil resistant The oil resistant cover of the belt protects it from contamination by mineral oil/ grease splash. Contamination by animal or vegetable oil or water solvent cutting oil will reduce belt life. In extreme cases the use of special construction XOR is recommended. Heat resistant Standard construction Optibelts will operate in ambient temperatures up to + 70 °C/ +158 °F. Higher ambient temperatures will lead to premature ageing and subsequent belt failure. In this case our special construction XHR is recommended. Cold resistant Standard construction Optibelt V-Belts will perform satisfactorily in ambient temperatures down to - 40 °C / - 40 °F for wrapped construction and - 30 °C / - 22 °F for raw edge construction. Under critical conditions practical tests are necessary.

Non standard Lengths and Special Constructions for Wrapped V-Belts In the event that fewer production sets than normal are required for a particular special construction wrapped belt (normal-3 production sets) then the following surcharges apply: 2 production sets 20 % surcharge 1 production set 40 % surcharge Please note that minimum production set quantities may vary for certain special construction belts. If in doubt ask your Optibelt contact.

Technical Accessories The following are available at a nominal charge: Measuring gauges for approximate length measurement of V-Belts up to 2500 mm. Tension gauges for the setting of the correct static tension of V-Belts. Technical Manuals For drive design.

Advice and Drive Design Our Applications Engineers are always available to give advice and to design drives. This service is free of charge .

Multiple Belt Drives

Price

Requirements for drives using sets of belts often demand belt measurement to form the sets. Optibelt S=C plus and Optibelt M=S belts do not require belt measurement or re-measurement to form sets.

Prices in this list are ”Recommended Retail Prices” and are subject all to appropriate taxes. This Price List supersedes all previous editions. This is applicable to all of our sales companies. Our “General Conditions of Sale”, copies available on request, are applicable to all transactions.

Anti static In order to comply with product safety requirements the specific Anti Static properties of any V-Belts must be tested to ISO 1813. A test certificate will be issued and a 20% surcharge will be applied. Anti Static V-Belts should be specified separately to ensure that the correct certification is carried out (EN 10204 „3.1.B”).

Standard bundle quantities for Optibelt V-Belts Section SPZ; XPZ; 3V/9N; 3VX SPA; XPA SPB; XPB; 5V/15N; 5VX SPC; XPC 8V/25N 5 Y/6 8 Z/10; ZX/X10 A/13; AX/X13 B/17; BX/X17 20 C/22; CX/X22 25 D/32 E/40 BM = Bundle quantitiy

up to 2300 mm (not coiled) 25 Pieces 25 Pieces 10 Pieces 10 Pieces — 25 Pieces 25 Pieces 25 Pieces 25 Pieces 25 Pieces 10 Pieces 10 Pieces 10 Pieces 10 Pieces 1 Piece —

up to 5000 mm (3 coils = 1 piece) 10 Pieces 10 Pieces 10 Pieces 5 Pieces 1 Piece — — — 10 Pieces 10 Pieces 10 Pieces 5 Pieces 5 Pieces 5 Pieces 1 Piece 1 Piece

over 5000 mm (5 coils = 1 piece) — — 5 Pieces 3 Pieces 1 Piece — — — — 10 Pieces 5 Pieces 3 Pieces 3 Pieces 3 Pieces 1 Piece 1 Piece 5

optibelt-SK Wedge Belts to BS 3790, DIN 7753 and USA-Standard RMA/MPTA

SPZ

Section SPZ /3V Euro/ each

Datum length ISO (mm)

USAStandard (inch)

£/ each

BM =5 pieces 487 512 562 587 612 630 3V 250 637 662 670 3V 265 687 710 3V 280 722 737 750 762 3V 300 772 787 800 3V 315 812 825 837 850 3V 335 862 875 887 900 3V 355 912 925 937 950 3V 375 962 987 1000 1012 3V 400 1024 1037 1047 1060 1077 3V 425 1087 1112 1120 1137 3V 450 1162 1180

Euro/ each

Datumlength ISO (mm)

1187 1202 1212 1237 1250 1262 1287 1312 1320 1337 1347 1362 1387 1400 1412 1437 1462 1487 1500 1512 1537 1562 1587 1600 1612 1637 1662 1687 1700 1737 1762 1787 1800 1812 1837 1862 1887 1900 1937 1987 2000 2037 2120 2137 2150•

USAStandard (inch)

3V 475

3V 500

3V 530

3V 560

£/ each

Euro/ each

Datumlength ISO (mm)

USAStandard (inch)

2187 2240 2287

3V 900

£/ each

BM = 10 pieces 2360 2500 2540• 3V 1000 2650 2690• 3V 1060 2800 2840• 3V 1120 3000 3V 1180 3150 3350 3V 1320 3550 3V 1400

3V 630

3V 670

3V 710

3V 750

3V 850

Maximum manufacturing length:4 500 mm Minimum production quantity: Over 1800 mm = 20 pieces for non standard lengths 60 pieces for certain special constructions Belt weight: ≈ 0.074 kg/m Lengths in bold print are in the S=C plus range

6

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt-SK Wedge Belts to BS 3790 and DIN 7753

SPA

Section SPA Euro/ each

Datum length ISO (mm)

£/ each

BM =5 pieces 732 757 782 800 807 832 850 857 882 900 907 932 950 957 982 1000 1007 1032 1060 1082 1107 1120 1132 1157 1180 1207 1232 1250 1257 1272 1282 1307 1320 1332 1357 1382 1400 1407 1432 1457 1482 1500 1507 1532 1557

Euro/ each

Datum length ISO (mm)

1582 1600 1607 1632 1657 1682 1700 1707 1732 1757 1782 1800 1807 1832 1857 1882 1900 1907 1932 1957 1982 2000 2032 2057 2082 2120 2132 2182 2207 2232 2240 2282 2300

£/ each

Euro/ each

Datum length ISO (mm)

£/ each

BM = 10 pieces 2307 2332 2360 2382 2432 2482 2500 2532 2582 2607 2632 2650 2682 2732 2782 2800 2832 2847 2882 2932 2982 3000 3032 3082 3150 3182 3282 3350 3382 3550 3750 4000 4250 4500

Maximum manufacturing length:4500 mm Minimum production quantity: Over 1800 mm = 31 pieces for non standard lengths 93 pieces for certain special constructions Belt weight: ≈ 0.123 kg/m Lengths in bold print are in the S=C plus range. Further sizes on request.

Datum length Ld = Pitch length Lw/Lp

7

optibelt-SK Wedge Belts BS 3790, DIN 7753, ISO4184 and USA RMA/MPTA

SPB

SPC

Section SPB /5V Euro/each

Datum length ISO (mm)

USAStandard (inch)

BM = 10 pieces 1250 1320 1400 1500 1600 1700 1800 1900 5V 750 2000 2020• 5V 800 2120 2150• 5V 850 2240 2280• 5V 900 2360 2400• 5V 950 2500 2650 2680• 5V 1060 2800 2840• 5V 1120 3000 3150 3250 3350 5V 1320 3550 5V 1400 3750 3800• 5V 1500 4000 4050• 5V 1600 4250 4300• 5V 1700 4500 4560• 5V 1800 4750 4820• 5V 1900 5000

Section SPC £/each

Euro/each

Datum length ISO (mm)

£/each

BM = 10 pieces 2000 2120 2240 BM =5 pieces 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 BM = pieces 5300 5600 6000 6300 6700 7100 7500 8000 8500 9000 9500 10000 10600 11200 12500

BM =5 pieces 5070• 5V 2000 5300 5600 6000 6300 6700 7100 5V 2800 7500 8000 5V 3150

Section 19 on request. Maximum manufacturing length: 10 000 mm Minimum production quantity: Over 1800 mm = 25 pieces for non standard lengths 75 pieces for certain special constructions Belt weight: ≈ 0.195 kg/m

Lengths in bold print are in the S=C plus range.

8

Maximum manufacturing length: 18 000 mm Minimum production quantity: Over 1800 mm = 16 pieces for non standard lengths 48 pieces for certain special constructions Belt weight: ≈ 0.377 kg/m

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt-SK High Capacity Narrow Belts to USA-Standard RMA/MPTA

Euro/ each

3V/9N

5V/15N

8V/25N

Section 3V/9N

Section 5V/15N

Section 8V/25N

Belt Number (inch)

3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V

Metric Reference ( mm)

£/ each

Euro/ each

BM =5 pieces 250 9N 635 265 9N 673 280 9N 711 300 9N 762 315 9N 800 335 9N 851 355 9N 902 375 9N 952 400 9N 1016 425 9N 1079 450 9N 1143 475 9N 1206 500 9N 1270 530 9N 1346 560 9N 1422 600 9N 1524 630 9N 1600 670 9N 1702 710 9N 1803 750 9N 1905 800 9N 2032 850 9N 2159 900 9N 2286

Belt weight: ≈ 0.074 kg/m

Metric Reference ( mm)

£/ each

Euro/ each

BM = 10 pieces 5V 530 15N 1346 5V 560 15N 1422 5V 600 15N 1524 5V 630 15N 1600 5V 670 15N 1702 5V 710 15N 1803 5V 750 15N 1905 5V 800 15N 2032 5V 850 15N 2159 5V 900 15N 2286 5V 950 15N 2413 5V 1000 15N 2540 5V 1060 15N 2692 5V 1120 15N 2845 5V 1180 15N 2997 5V 1250 15N 3175 5V 1320 15N 3353 5V 1400 15N 3556 5V 1500 15N 3810 5V 1600 15N 4064 5V 1700 15N 4318 5V 1800 15N 4572 5V 1900 15N 4826 5V 2000 5V 2120 5V 2240 5V 2360 5V 2500 5V 2650 5V 2800 5V 3000 5V 3150 5V 3350 5V 3550

15N 5080 15N 5385 15N 5690 15N 5994 15N 6350 15N 6731 15N 7112 15N 7620 15N 8001 15N 8509 15N 9017

Maximum manufacturing length: 10 000 mm Minimum production quantity: Over 1800 mm La = 2050 mm La 25 pieces for non standard lengths 75 pieces for certain special constructions Over 2050 mm La = 23 pieces for non standard lengths 69 pieces for certain special constructions Belt weight: ≈ 0.195 kg/m

Belt number explanation The belt number incorporates the belt section identification and the belt length in inches x 10.

Belt Number (inch)

Metric Reference (mm)

£/ each

BM = 1 pieces 8V 1000 25N 2540 8V 1120 25N 2845 8V 1180 25N 2997 8V 1250 25N 3175 8V 1320 25N 3353 8V 1400 25N 3556 8V 1500 25N 3810 8V 1600 25N 4064 8V 1700 25N 4318 8V 1800 25N 4572 8V 1900 25N 4826 8V 2000 25N 5080 8V 2120 25N 5385 8V 2240 25N 5690 8V 2360 25N 5994 8V 2500 25N 6350 8V 2650 25N 6731 8V 2800 25N 7112 8V 3000 25N 7620 8V 3150 25N 8001 8V 3350 25N 8509 8V 3550 25N 9017 8V 3750 25N 9525 8V 4000 25N 10160 8V 4250 25N 10795 8V 4500 25N 11430 8V 4750 25N 12065 8V 5000 25N 12700

BM = 5 pieces

BM = 10 pieces 3V 950 9N 2413 3V 1000 9N 2540 3V 1060 9N 2692 3V 1120 9N 2845 3V 1180 9N 2997 3V 1250 9N 3175 3V 1320 9N 3353 3V 1400 9N 3556

Maximum manufacturing length:4 500 mm Minimum production quantity: Over 1800 mm = 20 pieces for non standard lengths 60 pieces for certain special constructions

Belt Number (inch)

Maximum standard manufacturing length: 18000 mm La Above 18 000 up to 19 000 mm on request Over 2540 mm La = 11 pieces for non standard lengths 33 pieces for certain special constructions Belt weight: ≈ 0.575 kg/m

Section 3V/9N = top width 3/8"/9 mm 5V/15N = top width 5/8"/16 mm 8V/25N = top width 1"/25,4 mm Length e. G. 750 =

750 · 25,4 = 1905 mm effective outside length 10

Lengths in bold print are in the S=C plus range. Further sizes on request.

9

optibelt

RED POWER Wedge belts to BS 3790 DIN 7753 Part 1 / ISO 4184

SPZ

SPA

Section SPZ Euro/ each

Datum length ISO (mm)

£/ each

Euro/ each

BM =5 pieces 1202 1212 1237 1250 1262 1287 1312 1320 1337 1362 1387 1400 1412 1437 1462 1487 1500 1512 1537 1562 1587 1600 1612 1637 1662 1687 1700 1737 1762 1787 1800 1837 1862 1887 1900 1937 1987 2000 2037 2120 2137 2187 2240 2287

BM = 10 pieces 2360 2500 2650 2800 3000 3150 3350 3550

£/ each

Euro/ each

Datum length ISO (mm)

£/ each

Euro/ each

BM =5 pieces 1207 1232 1250 1257 1282 1307 1320 1332 1357 1382 1400 1407 1432 1457 1482 1500 1507 1532 1557 1582 1600 1607 1632 1657 1682 1700 1707 1732 1757 1782 1800 1807 1832 1857 1882 1900 1907 1932 1957 1982 2000 2032 2057 2082 2120

Datum length ISO (mm)

£/ each

2132 2182 2207 2232 2240 2282 2300 BM = 10 pieces 2307 2332 2360 2382 2432 2482 2500 2532 2582 2607 2632 2650 2682 2732 2782 2800 2832 2847 2882 2932 2982 3000 3032 3082 3150 3182 3282 3350 3382 3550 3750 4000

Maximum manufacturing length: 4 000 mm Minimum production quantity: Over 1800 mm = 120 pieces for non standard lengths

Maximum manufacturing length: 4 000 mm Minimum production quantity: Over 1800 mm = 95 pieces for non standard lengths

Belt weight: ≈ 0.074 kg/m

Belt weight: ≈ 0.123 kg/m

Lengths in bold print are in the S=C plus range.

10

Section SPA Datum length ISO (mm)

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt

RED POWER Wedge belts to BS 3790 DIN 7753 Part 1 / ISO 4184

SPB

SPC

Section SPB Euro/each

Datum length ISO (mm)

Section SPC £/each

Euro/each

BM = 10 pieces 1250 1320 1400 1500 1600 1700 1800 1900 2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000

Belt weight: ≈ 0,195 kg/m Lengths in bold print are in the S=C plus range. Further sizes on request.

£/each

BM = 10 pieces 2000 2120 2240 BM = 5 pieces 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 BM = pieces 5300 5600 6000 6300 6700 7100 7500 8000

BM = 5 pieces 5300 5600 6000 6300 6700 7100 7500 8000

Maximum manufacturing length: 8 000 mm Minimum production quantity: 1250 mm – 2120 mm = 50 pieces for non standard lengths Over 2120 mm = 72 pieces for non standard lengths

Datum length ISO (mm)

Maximum manufacturing length: 8 000 mm Minimum production quantity: Over 2000 mm = 44 pieces for non standard lengths Belt weight: ≈ 0,377 kg/m

Datum length Ld = Pitch length Lw/Lp

11

optibelt

RED POWER Wedge Belts to BS 3790 USA-Standard RMA/MPTA

Euro/ each

3V/9N

5V/15N

8V/25N

Section 3V/9N

Section 5V/15N

Section 8V/25N

USAStandard (inch)

3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V 3V

USAStandard (Outside length mm)

£/ each

BM = 5 pieces 475 9N 1206 500 9N 1270 530 9N 1346 560 9N 1422 600 9N 1524 630 9N 1600 670 9N 1702 710 9N 1803 750 9N 1905 800 9N 2032 850 9N 2159 900 9N 2286

BM = 10 3V 950 3V 1000 3V 1060 3V 1120 3V 1180 3V 1250 3V 1320 3V 1400

pieces 9N 2413 9N 2540 9N 2692 9N 2845 9N 2997 9N 3175 9N 3353 9N 3556

Euro/ each

USAStandard (inch)

USAStandard (Outside length mm)

£/ each

BM = 10 pieces 5V 530 15N 1346 5V 560 15N 1422 5V 600 15N 1524 5V 630 15N 1600 5V 670 15N 1702 5V 710 15N 1803 5V 750 15N 1905 5V 800 15N 2032 5V 850 15N 2159 5V 900 15N 2286 5V 950 15N 2413 5V 1000 15N 2540 5V 1060 15N 2692 5V 1120 15N 2845 5V 1180 15N 2997 5V 1250 15N 3175 5V 1320 15N 3353 5V 1400 15N 3556 5V 1500 15N 3810 5V 1600 15N 4064 5V 1700 15N 4318 5V 1800 15N 4572 5V 1900 15N 4826

Euro/ each

USAStandard (inch)

USAStandard (Outside length mm)

£/ each

BM = 1 pieces 8V 1000 25N 2540 8V 1120 25N 2845 8V 1180 25N 2997 8V 1250 25N 3175 8V 1320 25N 3353 8V 1400 25N 3556 8V 1500 25N 3810 8V 1600 25N 4064 8V 1700 25N 4318 8V 1800 25N 4572 8V 1900 25N 4826 8V 2000 25N 5080 8V 2120 25N 5385 8V 2240 25N 5690 8V 2360 25N 5994 8V 2500 25N 6350 8V 2650 25N 6731 8V 2800 25N 7112 8V 3000 25N 7620 8V 3150 25N 8001 8V 3350 25N 8509

BM = 5 pieces 5V 2000 15N 5080 5V 2120 15N 5385 5V 2240 15N 5690 5V 2360 15N 5994 5V 2500 15N 6350 5V 2650 15N 6731 5V 2800 15N 7112 5V 3000 15N 7620 5V 3150 15N 8001

Maximum manufacturing length: 4 000 mm La Minimum production quantity: 1206 mm La – 2032 mm La = 80 pieces for non standard lengths Over 2032 mm La = 98 pieces for non standard lengths

Maximum manufacturing length: 8 000 mm La Minimum production quantity: 1270 mm La – 2032 mm La = 50 pieces for non standard lengths Over 2032 mm La = 72 pieces for non standard lengths

Belt weight: ≈ 0,074 kg/m

Belt weight: ≈ 0,195 kg/m

Lengths in bold print are in the S=C plus range.

12

Maximum manufacturing length: 8 500 mm La Minimum production quantity: Over 2540 mm La = 40 pieces for non standard lengths Belt weight: ≈ 0,575 kg/m

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

Euro/each

5

Y/6

8

Section 5 ▲

Section Y/6 ▲

Section 8

Datum length ISO (mm)

Inside length (mm)

£/each

Euro/each

Datum length ISO (mm)

BM = 25 pieces 200 190 239 229 270 260 290 280 310 300 325 315 332 322 345 335 385 375 435 425 485 475 510 500 540 530 564 554 610 600

Belt weight: ≈ 0,018 kg/m

▲

Moulded Cogged Raw Edge V-Belts.

Further sizes on request.

Inside length (mm)

£/each

Euro/each

Datum length ISO (mm)

BM = 25 pieces 295 280 315 300 350 335 415 400 440 425 465 450 515 500 555 540 615 600 865 850

Belt weight: ≈ 0,026 kg/m

Inside length (mm)

£/each

BM = 25 pieces 335▲ 315▲ 375▲ 355▲ 420▲ 400▲ 445▲ 425▲ 470▲ 450▲ 495▲ 475▲ 510▲ 490▲ 550▲ 530▲ 580▲ 560▲ 595▲ 575▲ 620▲ 600▲ 650▲ 630▲ 690▲ 670▲ 720▲ 700▲ 730▲ 710▲ 770▲ 750▲ 795▲ 775▲ 820▲ 800▲ 845 825 870 850 895 875 920 900 970 950 1020 1000 1040 1020 1070 1050 1095 1075 1140 1120 1220 1200 1270 1250

Belt weight: ≈ 0,042 kg/m

Datum length Ld = Pitch length Lw/Lp

13

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

Z/10

Section Z/10 Euro/each

Belt No.

Z 11 Z 121/2 Z 14 Z 15 Z 16 Z 17 Z 18 Z 19 Z 193/4 Z 20 Z 201/2 Z 21 Z 211/4 Z 22 Z 23 Z 24 Z 25 Z 26 Z 27 Z 271/2 Z 28 Z 281/2 Z 29 Z 291/2 Z 30 Z 31 Z 311/2 Z 32 Z 33 Z 331/2 Z 34 Z 35 Z 36 Z 37 Z 38 Z 381/2 Z 39 Z 40 Z 401/2 Z 41 Z 411/2 Z 42 Z 43 Z 431/4 Z 44

Datum length ISO (mm)

Inside length (mm)

BM = 25 pieces 312▲ 337▲ 397▲ 422▲ 447▲ 472▲ 497▲ 502▲ 522▲ 537▲ 547▲ 552▲ 562▲ 582▲ 597 622 652 672 692 722 732 747 752 772 787 797 822 842 847 872 887 897 922 947 972 997 1022 1038 1052 1063 1072 1082 1102 1122 1142

290▲ 315▲ 375▲ 400▲ 425▲ 450▲ 475▲ 480▲ 500▲ 515▲ 525▲ 530▲ 540▲ 560▲ 575 600 630 650 670 700 710 725 730 750 765 775 800 820 825 850 865 875 900 925 950 975 1000 1016 1030 1041 1050 1060 1080 1100 1120

£/each

Euro/each

Belt No.

Z 45 Z 46 Z 461/2 Z 47 Z 48 Z 481/2 Z 49 Z 50 Z 51 Z 52 Z 53 Z 54 Z 55 Z 56 Z 57 Z 58 Z 59 Z 60 Z 61 Z 62 Z 63 Z 64 Z 65 Z 66 Z 67 Z 68 Z 69 Z 70 Z 71 Z 73 Z 75 Z 78 Z 79 Z 831/2 Z 88 Z 93 Z 98

Datum length ISO (mm)

Inside length (mm)

1172 1187 1202 1216 1237 1247 1272 1292 1317 1342 1368 1393 1422 1444 1472 1497 1522 1546 1572 1597 1622 1648 1673 1697 1722 1747 1772 1797 1822 1872 1922 1997 2022 2142 2262

1150 1165 1180 1194 1215 1225 1250 1270 1295 1320 1346 1371 1400 1422 1450 1475 1500 1524 1550 1575 1600 1626 1651 1675 1700 1725 1750 1775 1800 1850 1900 1975 2000 2120 2240

BM = 10 pieces 2382 2522

2360 2500

£/each

Maximum manufacturing length: 4 500 mm Minimum production quantity: Over 1800 mm = 20 pieces for non standard lengths 60 pieces for certain special constructions Belt weight: ≈ 0.064 kg/m Lengths in bold print are in the S=C plus range.

14

▲

Moulded Cogged Raw Edge V-Belts.

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

A/13

Section A/13 Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

£/ each

BM = 25 pieces A 16 437 407 A 18 487 457 A 19 510 480 A 20 538 508 A 21 565 535 A 22 590 560 A 23 605 575 A 231/2 630 600 A 24 640 610 A 25 660 630 A 26 680 650 A 261/2 700 670 A 27 716 686 A 271/2 730 700 A 28 740 710 A 29 760 730 A 291/2 780 750 A 30 797 767 A 31 805 775 A 311/2 830 800 A 32 843 813 A 321/2 855 825 A 33 871 841 A 34 880 850 A 341/2 905 875 A 35 919 889 A 351/2 930 900 A 36 944 914 A 37 955 925 A 371/2 980 950 A 38 995 965 A 381/2 1005 975 A 39 1030 1000 A 40 1046 1016 A 401/2 1060 1030 A 41 1071 1041 A 411/2 1080 1050 A 42 1090 1060 A 421/2 1105 1075 A 43 1130 1100 A 431/2 1135 1105 A 44 1150 1120 A 45 1173 1143 A 451/2 1180 1150 A 46 1198 1168 A 461/2 1210 1180 A 47 1230 1200 A 471/2 1245 1215 A 48 1250 1220 A 481/2 1255 1225

Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

A 49 A 50 A 51 A 52 A 53 A 54 A 55 A 56 A 57 A 58 A 59 A 60 A 61 A 62 A 63 A 64 A 65 A 66 A 67 A 68 A 69 A 70 A 71 A 72 A 73 A 74 A 75 A 76 A 77 A 78 A 79 A 80 A 81 A 82 A 83 A 831/2 A 84 A 841/2 A 85 A 86 A 87 A 88 A 89 A 90

1280 1300 1330 1350 1380 1405 1430 1452 1480 1505 1530 1555 1580 1605 1630 1655 1680 1706 1730 1755 1780 1805 1830 1855 1884 1910 1930 1960 1986 2010 2030 2062 2090 2113 2130 2150 2164 2180 2190 2230 2240 2270 2291 2316

1250 1270 1300 1320 1350 1375 1400 1422 1450 1475 1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1775 1800 1825 1854 1880 1900 1930 1956 1980 2000 2032 2060 2083 2100 2120 2134 2150 2160 2200 2210 2240 2261 2286

£/ each

Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

£/ each

BM = 10 pieces A 91 A 92 A 93 A 94 A 95 A 96 A 97 A 98 A 100 A 102 A 104 A 105 A 107 A 108 A 110 A 112 A 114 A 116 A 118 A 120 A 124 A 128 A 132 A 136 A 140 A 144 A 148 A 158 A 167 A 187 A 197

2341 2367 2390 2418 2443 2468 2494 2530 2570 2621 2680 2697 2755 2773 2830 2875 2926 2976 3030 3078 3180 3280 3380 3484 3580 3688 3780 4030 4280 4780 5030

2311 2337 2360 2388 2413 2438 2464 2500 2540 2591 2650 2667 2725 2743 2800 2845 2896 2946 3000 3048 3150 3250 3350 3454 3550 3658 3750 4000 4250 4750 5000

Maximum manufacturing length: 10 000 mm Minimum production quantity: Over 1800 mm = 31 pieces for non standard lengths 93 pieces for certain special constructions Belt weight: ≈ 0.109 kg/m Lengths in bold print are in the S=C plus range. Further sizes on request.

Datum length Ld = Pitch length Lw/Lp

15

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

B/17

Section B/17 Euro/ each

Belt No.

Datum length ISO (mm)

Inside length (mm)

£/ each

Euro/ each

Belt No.

Datum length ISO (mm)

Inside length (mm)

B 59 B 60 B 61 B 62 B 63 B 64 B 65 B 66 B 67 B 68 B 69 B 691/2 B 70 B 71 B 72 B 73 B 74 B 75 B 76 B 77 B 78 B 79 B 80 B 81 B 82 B 83 B 831/2 B 84 B 85 B 86 B 87 B 88 B 89 B 90 B 91 B 92 B 93 B 94 B 941/2 B 95 B 96 B 961/2 B 97 B 98 B 99 B 100 B 101 B 102 B 103 B 104

1540 1565 1590 1615 1640 1665 1690 1716 1740 1765 1790 1801 1815 1840 1869 1890 1920 1940 1970 1990 2021 2040 2072 2100 2123 2140 2160 2174 2200 2240 2250 2280 2301 2326 2340 2377 2400 2428 2440 2453 2478 2490 2505 2540 2555 2580 2605 2640 2656 2690

1500 1525 1550 1575 1600 1625 1650 1676 1700 1725 1750 1761 1775 1800 1829 1850 1880 1900 1930 1950 1981 2000 2032 2060 2083 2100 2120 2134 2160 2200 2210 2240 2261 2286 2300 2337 2360 2388 2400 2413 2438 2450 2465 2500 2515 2540 2565 2600 2616 2650

£/ each

BM = 10 pieces B 23 B 24 B 25 B 26 B 261/2 B 27 B 28 B 29 B 30 B 31 B 32 B 321/2 B 33 B 34 B 341/2 B 35 B 36 B 37 B 371/2 B 38 B 381/2 B 39 B 40 B 401/2 B 41 B 411/2 B 42 B 421/2 B 43 B 431/4 B 44 B 45 B 451/2 B 46 B 461/2 B 47 B 48 B 481/2 B 49 B 50 B 51 B 52 B 521/2 B 53 B 531/2 B 54 B 55 B 56 B 57 B 58

610 655 670 690 710 726 750 765 790 815 840 865 876 890 915 929 940 965 990 1005 1015 1040 1056 1070 1080 1090 1100 1115 1130 1140 1160 1190 1203 1215 1220 1240 1255 1265 1290 1315 1340 1360 1375 1390 1400 1412 1440 1462 1490 1513

570 615 630 650 670 686 710 725 750 775 800 825 836 850 875 889 900 925 950 965 975 1000 1016 1030 1040 1050 1060 1075 1090 1100 1120 1150 1163 1175 1180 1200 1215 1225 1250 1275 1300 1320 1335 1350 1360 1372 1400 1422 1450 1473

Maximum manufacturing length: 15 500 mm Minimum production quantity: Over 1800 mm = 25 pieces for non standard lengths 75 pieces for certain special constructions Over 2000 mm Li = 21 pieces for non standard lengths 63 pieces for certain special constructions Belt weight: ≈ 0,196 kg/m Lengths in bold print are in the S=C plus range.

16

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

B/17

20

Section B/17 Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

£/ each

BM = 10 pieces B 105 2707 2667 B 106 2740 2700 B 107 2758 2718 B 108 2790 2750 B 110 2840 2800 B 112 2885 2845 B 114 2940 2900 B 115 2961 2921 B 116 2990 2950 B 118 3040 3000 B 120 3088 3048 B 122 3139 3099 B 124 3190 3150 B 126 3240 3200 B 128 3290 3250 B 130 3342 3302 B 132 3390 3350 B 134 3444 3404 B 136 3490 3450 B 138 3545 3505 B 140 3590 3550 B 142 3640 3600 B 144 3698 3658 B 146 3740 3700 B 148 3790 3750 B 150 3850 3810 B 151 3890 3850 B 152 3901 3861 B 154 3952 3912 B 155 3990 3950 B 156 4002 3962 B 158 4040 4000 B 160 4104 4064 B 162 4155 4115 B 165 4240 4200 B 167 4290 4250 B 173 4434 4394 B 175 4490 4450 B 177 4540 4500 B 180 4612 4572 B 187 4790 4750 B 195 4993 4953 B 197 5040 5000

Maximum manufacturing length: 15 500 mm Minimum production quantity: Over 1800 mm Li = 2000 mm Li 25 pieces for non standard lengths 75 pieces for certain special constructions Over 2000 mm Li = 21 pieces for non standard lengths 63 pieces for certain special constructions Belt weight: ≈ 0,196 kg/m Lengths in bold print are in the S=C plus range. Further sizes on request.

Euro/ each

Section 20 Belt No.

Dat. length ISO (mm)

Inside length (mm)

BM = 5 pieces B 208 5340 5300 B 210 5374 5334 B 220 5640 5600 B 236 6040 6000 B 240 6136 6096 B 248 6340 6300 B 264 6740 6700 B 276 7040 7000 B 280 7140 7100

£/ each

Euro/ each

Dat. length ISO (mm)

Inside length (mm)

£/ each

BM = 10 pieces 950 900 1050 1000 1170 1120 1230 1180 1300 1250 1370 1320 1450 1400 1550 1500 1650 1600 1750 1700 1850 1800 1950 1900 2050 2000 2170 2120 2290 2240 BM = 5 pieces 2410 2360 2550 2500 2700 2650 2850 2800 3050 3000 3200 3150 3400 3350 3600 3550 3800 3750 4050 4000 4550 4500 5050 5000 BM = 3 pieces 6050 6000

Maximum manufacturing length: 10 000 mm Minimum production quantity: Over 1800 mm Li = 2000 mm Li = 21 pieces for non standard lengths 63 pieces for certain special constructions Over 2000 mm Li = 18 pieces for non standard lengths 54 pieces for certain special constructions Belt weight: ≈ 0.266 kg/m Datum length Ld = Pitch length Lw/Lp

17

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

C/22

Section C/22 Euro/ each

Belt No.

C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C

Dat. length ISO (mm)

Inside length (mm)

£/ each

BM = 10 pieces 43 1148 1090 47 1258 1200 48 1273 1215 49 1308 1250 51 1353 1295 52 1378 1320 53 1408 1350 54 1433 1375 55 1458 1400 56 1483 1425 57 1508 1450 58 1533 1475 59 1558 1500 60 1582 1524 61 1608 1550 62 1632 1574 63 1658 1600 65 1708 1650 66 1734 1676 67 1758 1700 68 1785 1727 69 1808 1750 70 1836 1778 71 1858 1800 72 1887 1829 73 1912 1854 74 1938 1880 75 1958 1900 76 1988 1930 77 2014 1956 78 2039 1981 79 2058 2000 80 2090 2032 81 2118 2060 82 2141 2083 83 2166 2108 2120 831/2 2178 84 2192 2134 85 2217 2159 86 2242 2184 87 2268 2210 88 2298 2240 89 2319 2261 90 2344 2286

Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

BM = 5 pieces C 92 2395 2337 C 93 2418 2360 C 94 2446 2388 C 95 2471 2413 C 96 2496 2438 2450 C 961/2 2508 C 97 2522 2464 C 98 2558 2500 C 99 2583 2525 C 100 2598 2540 C 101 2618 2560 C 102 2649 2591 C 104 2700 2642 C 105 2725 2667 C 106 2750 2692 C 108 2808 2750 C 110 2858 2800 C 112 2903 2845 C 114 2954 2896 C 115 2979 2921 C 116 3008 2950 C 117 3023 2965 C 118 3058 3000 C 120 3106 3048 C 122 3157 3099 C 124 3208 3150 C 126 3258 3200 C 128 3308 3250 C 130 3360 3302 C 132 3408 3350 C 134 3462 3404 C 136 3508 3450 C 138 3563 3505 C 140 3608 3550 C 142 3665 3607 C 144 3716 3658 C 146 3758 3700 C 148 3808 3750 C 150 3868 3810 C 158 4058 4000 C 162 4158 4100 C 166 4274 4216 C 167 4308 4250 C 168 4325 4267 C 170 4376 4318

£/ each

Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

C 173 C 175 C 177 C 180 C 187 C 190 C 195 C 197

4452 4503 4558 4630 4808 4884 5011 5058

4394 4445 4500 4572 4750 4826 4953 5000

£/ each

BM = 3 pieces C 208 5358 5300 C 210 5392 5334 C 220 5658 5600 C 225 5773 5715 C 236 6058 6000 C 240 6154 6096 C 248 6358 6300 C 264 6758 6700 C 270 6916 6858 C 280 7158 7100 C 295 7558 7500 C 300 7678 7620 C 315 8058 8000

Maximum standard manufacturing length: 18 000 mm Minimum production quantity: Over 1800 mm Li = 2000 mm Li 19 pieces for non standard lengths 57 pieces for certain special constructions Over 2000 mm Li = 16 pieces for non standard lengths 48 pieces for certain special constructions Gewicht: ≈ 0,324 kg/m Lengths in bold print are in the S=C plus range.

18

Datum length Ld = Pitch length Lw/Lp Further sizes on request.

optibelt-VB V-Belts to BS 3790, DIN 2215 and ISO 4184

25

D/32

Section 25 Euro/ each

Dat. length ISO (mm)

Inside length (mm)

E/40

Section D/32 £/ each

Euro/ each

BM = 10 pieces 1460 1400 1560 1500 1660 1600 1760 1700 1860 1800 1960 1900 2060 2000 2180 2120 2300 2240

Belt . No.

Dat. length ISO (mm)

Inside length (mm)

Section E/40 £/ each

BM = 1 piece D 79 2075 2000 D 98 2575 2500 D 104 2725 2650 D 110 2875 2800 D 118 3075 3000 D 120 3123 3048 D 124 3225 3150 D 128 3326 3251 D 132 3425 3350 D 135 3500 3425 D 136 3529 3454 D 140 3625 3550 D 144 3733 3658 D 148 3825 3750 D 154 4000 3925 D 158 4075 4000 D 162 4190 4115 D 167 4325 4250 D 173 4469 4394 D 177 4575 4500 D 180 4647 4572 D 187 4825 4750 D 195 5028 4953 D 197 5075 5000 D 208 5375 5300 D 210 5409 5334 D 220 5675 5600 D 225 5790 5715 D 236 6075 6000 D 240 6171 6096 D 248 6375 6300 D 264 6775 6700 D 270 6933 6858 D 280 7175 7100 D 295 7575 7500 D 300 7695 7620 D 315 8075 8000 D 330 8457 8382 D 335 8575 8500 D 354 9075 9000 D 374 9575 9500 D 394 10075 10000 D 441 11275 11200

BM = 5 pieces 2420 2360 2560 2500 2710 2650 2760 2700 2860 2800 3060 3000 3210 3150 3410 3350 3610 3550 3810 3750 4060 4000 4310 4250 4560 4500 4810 4750 5060 5000 BM = 3 Stück 5360 5300 5660 5600 6060 6000 6360 6300 6760 6700 7160 7100 7560 7500 8060 8000 8560 8500 9060 9000

Euro/ each

Belt No.

Dat. length ISO (mm)

Inside length (mm)

£/ each

BM = 1 piece E 118 3080 3000 E 158 4080 4000 E 197 5080 5000 E 220 5680 5600 E 236 6080 6000 E 248 6380 6300 E 280 7180 7100 E 295 7580 7500 E 315 8080 8000 E 354 9080 9000 E 394 10080 10000 E 441 11280 11200 E 492 12580 12500 (Non Stock Sizes)

Maximum manufacturing length: 19 000 mm Li Minimum quantities for all sizes: Over 3000 up to 18 000 Li = 7 pieces for non standard lengths 21 pieces for certain special constructions Over 18 000 mm Li on request Belt weight: ≈ 0.958 kg/m

optibelt-VB/LC V-Belts with Light Cover Fabric

Range Section

Datum length (mm)

A/13 B/17 20 C/22 25 D/32

1900 to 10 000 1900 to 15 500 1900 to 10 000 1900 to 18 000 1900 to 18 000 2000 to 18 000

Length range and prices see pages 15 to 19 + 40% surcharge

Maximum standard manufacturing length: 18 000 mm Li Over 1800 mm Li = 2000 mm Li = 17 pieces for non standard lengths 51 pieces for certain special constructions Over 2000 mm Li = 14 pieces for non standard lengths 42 pieces for certain special constructions Belt weight: ≈ 0.420 kg/m

Maximum standard manufacturing length: 18 000 mm Above 18 000 up to 19 000 mm Li on request Minimum production quantity: Over 2000 mm = 11 pieces for non standard lengths 33 pieces for certain special constructions Belt weight: ≈ 0.668 kg/m

Lengths in bold print are in the S=C plus range. Further sizes on request.

optibelt-LD Light Duty USA-Standard RMA/MPTA Section: 2L; 3L; 4L; 5L Range and prices on request. Datum length Ld = Pitch length Lw/Lp

19

Moulded Cogged Raw Edge V-Belts

XPZ

Section XPZ / 3VX Euro/each

Datum length ISO (mm)

USA Standard (inch)

BM = 25 pieces 587 612 630 3VX 250 637 662 670 3VX 265 687 710 3VX 280 737 750 762 3VX 300 772 787 800 3VX 315 812 825 837 850 3VX 335 862 875 887 900 3VX 355 912 925 937 950 3VX 375 962 987 1000 1012 3VX 400 1037 1060 1077 3VX 425 1087 1112 1120 1137 3VX 450 1162 1180 1187 1202 3VX 475 1212 1237 1250 1262 3VX 500 1287 1312 1320 1337 3VX 530 1362

£/each

Euro/each

Datum length ISO (mm)

1387 1400 1412 1437 1462 1487 1500 1512 1537 1562 1587 1600 1612 1662 1700 1762 1800 1900 2000 2120 2150• 2240

USA Standard (inch)

£/each

3VX 560

3VX 630 3VX 670 3VX 710 3VX 750 3VX 850

BM = 10 pieces 2360 2500 2540• 3VX 1000 2650 2690• 3VX 1060 2800 2840• 3VX 1120 3000 3VX 1180 3150 3350 3VX 1320 3550 3VX 1400

Belt weight: ≈ 0,065 kg/m Optibelt Super TX M=S V-Belts of the same length can be used in matched sets, without the need for re-measuring and matching.

20

Datum length Ld = Pitch length Lw/Lp

Moulded Cogged Raw Edge V-Belts

XPA

Section XPA Euro/each

Datum length ISO (mm)

BM = 25 pieces 732 757 782 800 807 832 850 857 882 900 907 932 950 957 982 1000 1007 1030 1060 1082 1107 1120 1132 1157 1180 1207 1232 1250 1257 1272 1282 1307 1320 1332 1357 1382 1400 1432 1457 1482 1500 1507 1532 1557 1582 1600 1607 1632 1700 1757

£/each

Euro/each

Datum length ISO (mm)

£/each

1800 1882 1900 2000 2120 2240 BM = 10 pieces 2360 2500 2650 2800 3000 3150 3350 3550

Belt weight: ≈ 0,111 kg/m Optibelt Super TX M=S V-Belts of the same length can be used in matched sets, without the need for re-measuring and matching. Datum length Ld = Pitch length Lw/Lp

21

Moulded Cogged Raw Edge V-Belts

XPB

XPC

Section XPB / 5VX Euro/each

Datum Length ISO (mm)

BM = 10 each 1250 1320 1400 1500 1600 1700 1800 1900 2000 2020• 2120 2150• 2240 2280• 2360 2400• 2500 2650 2680• 2800 2840• 3000 3150 3350 3550

Belt weight: ≈ 0,183 kg/m

USA Standard (inch)

Section XPC £/each

Euro/each

Datum Length ISO (mm)

£/each

BM = 10 each 2000 2120 2240

5VX 750 5VX 800 5VX 850

BM = 5 each 2360 2500 2650 2800 3000 3150 3350 3550

5VX 900 5VX 950 5VX 1060 5VX 1120 5VX 1320 5VX 1400

Belt weight: ≈ 0,340 kg/m

Optibelt Super TX M=S V-Belts of the same length can be used in matched sets, without the need for re-measuring and matching.

22

Datum length Ld = Pitch length Lw/Lp

Moulded Cogged Raw Edge V-Belts

3VX/9NX

5VX/15NX

Section 3VX/9NX Euro/each

Belt Number (inch)

3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX 3VX

Effective outside length (mm)

BM = 25 pieces 250 635 265 673 280 711 300 762 315 800 335 851 355 902 375 952 400 1016 425 1079 450 1143 475 1206 500 1270 530 1346 560 1422 600 1524 630 1600 670 1702 710 1803 750 1905 800 2032 850 2159 900 2286

Section 5VX/15NX £/each

Euro/each

Belt Number (inch)

Effective outside length (mm)

£/each

BM = 10 pieces 5VX 500 1270 5VX 530 1346 5VX 560 1422 5VX 600 1524 5VX 630 1600 5VX 670 1702 5VX 710 1803 5VX 750 1905 5VX 800 2032 5VX 850 2159 5VX 900 2286 5VX 950 2413 5VX 1000 2540 5VX 1060 2692 5VX 1120 2845 5VX 1180 2997 5VX 1250 3175 5VX 1320 3353 5VX 1400 3556

BM = 10 pieces 3VX 950 2413 3VX 1000 2540 3VX 1060 2692 3VX 1120 2845 3VX 1180 2997 3VX 1250 3175 3VX 1320 3353 3VX 1400 3556

Belt weight: ≈ 0,065 kg/m

Belt weight: ≈ 0,183 kg/m

Optibelt Super TX M=S V-Belts of the same length can be used in matched sets, without the need for re-measuring and matching.

23

Moulded Cogged Raw Edge V-Belts

ZX/X10

AX/X13

Section ZX/X10 Euro/each

Belt No.

Datum length ISO (mm)

BM = 25 pieces ZX 23 597 ZX 24 622 ZX 25 652 ZX 26 672 ZX 27 692 ZX 28 732 ZX 29 752 ZX 291/2 772 ZX 311/2 822 ZX 32 842 ZX 33 847 872 ZX 331/2 ZX 35 897 ZX 36 922 ZX 37 947 ZX 38 972 ZX 40 1038• ZX 42 1082• ZX 461/2 1202• ZX 52 1342• ZX 55 1422• ZX 59 1522•

Belt weight: ≈ 0,062 kg/m Li ≈ Ld – 22 mm Li = Inside length Datum length Ld = Pitch length Lw/Lp • Non stock items.

24

Section AX/X13 £/each

Euro/each

Belt No.

Datum length ISO (mm)

£/each

BM = 25 pieces AX 23 605 AX 231/2 630 AX 24 640 AX 25 660 AX 261/2 700 AX 27 716 AX 28 740 AX 29 760 AX 30 797 AX 31 805 AX 32 843 AX 33 871 AX 34 880 AX 35 919 AX 351/2 930 AX 36 944 AX 37 955 980 AX 371/2 AX 38 995 AX 39 1030 AX 40 1046 AX 411/2 1080 AX 42 1090 AX 43 1130 AX 44 1150 AX 451/2 1180 AX 46 1198 AX 47 1230 AX 48 1250 AX 49 1280 AX 50 1300 AX 51 1330 AX 52 1350 AX 53 1380 AX 54 1405 AX 55 1430 AX 56 1452 AX 57 1480 AX 58 1505 AX 59 1530 AX 62 1605 AX 63 1630 AX 67 1730 AX 70 1805 AX 71 1830 AX 75 1930 AX 79 2030 AX 88 2270

Euro/each

Belt No.

Datum length ISO (mm)

BM = 10 pieces AX 93 2390 AX 98 2530 AX 104 2680• AX 110 2830• AX 118 3030• AX 124 3180• AX 132 3380•

Belt weight:≈ 0,099 kg/m Li ≈ Ld – 30 mm Optibelt Super TX M=S V-Belts of the same length can be used in matched sets, without the need for re-measuring and matching. Further sizes and minimum production quantities for non standard lengths on request.

£/each

Moulded Cogged Raw Edge V-Belts

BX/X17

CX/X22

Section BX/X17 Euro/each

Belt No.

Datum length ISO (mm)

BM = 10 pieces BX 23 610 BX 25 670 BX 26 690 BX 28 750 BX 29 765 BX 30 790 BX 31 815 BX 32 840 BX 33 876 BX 34 890 BX 341/2 915 BX 35 929 BX 36 940 BX 37 965 BX 38 1005 BX 39 1040 BX 40 1056 BX 41 1080 BX 42 1100 BX 43 1130 BX 44 1160 BX 45 1190 1203 BX 451/2 BX 46 1215 BX 461/2 1220 BX 47 1240 BX 48 1255 BX 49 1290 BX 50 1315 BX 51 1340 BX 52 1360 BX 53 1390 BX 54 1412 BX 55 1440 BX 57 1490 BX 58 1513 BX 59 1540 BX 61 1590 BX 62 1615 BX 63 1640 BX 67 1740 BX 69 1790 BX 71 1840 BX 73 1890 BX 75 1940

Belt weight: ≈ 0,165 kg/m Li ≈ Ld – 40 mm Li = Inside length Datum length Ld = Pitch length Lw/Lp • Non stock items.

£/each

Euro/each

Section CX/X22 Belt No.

Datum length ISO (mm)

BX 79 BX 88 BX 93 BX 98 BX 103 BX 104 BX 110 BX 118 BX 124 BX 132

2040 2280 2400 2540 2656• 2690• 2840• 3040• 3190• 3390•

£/each

Euro/each

Belt No.

Datum length ISO (mm)

£/each

BM = 10 pieces CX 39 1058• CX 43 1148• CX 49 1308• CX 52 1378• CX 55 1458• CX 59 1558• CX 62 1632• CX 67 1758• CX 68 1785• CX 71 1858• CX 75 1958• CX 79 2058• CX 81 2118• CX 85 2217• CX 88 2298• BM = 5 pieces CX 90 2344• CX 93 2418• CX 96 2496• CX 98 2558• CX 110 2858• CX 118 3058• CX 124 3208• CX 132 3408•

Belt weight: ≈ 0,276 kg/m Li ≈ Ld – 58 mm Optibelt Super TX M=S V-Belts of the same length can be used in matched sets, without the need for re-measuring and matching. Further sizes and minimum production quantities for non standard lengths on request.

25

Moulded Cogged Raw Edge Variable Speed Belts

Manufacturing data Belt length

up to 5000 mm Li

Belt top width

up to 100 mm

Belt height

5 up to 25 mm

24° Angle for sections

13 x 5; 17 x 5

30° Angle for sections

52 x 16; 55 x 16; 65 x 20; 70 x 18

27° Angle for all other sections except range to USA-Standard RMA/MPTA. Variable Speed Belts with angles of 22° to 42° can be made on request, but minimum quantities are obligatory.

Tolerances

26

Length tolerance

± 1% of nominal belt length

Angle tolerance

± 1,5° of nominal angle

Higth tolerance

≤ 8 mm = ± 0,8 mm > 8 up to 20 mm = ± 1,0 mm > 20 mm = ± 1,5 mm

Width tolerance

± 0,75 mm Double Cogged Variable Speed Belts on request.

Moulded Cogged Raw Edge Variable Speed Belts

Euro/each

Section (mm)

Inside length (mm)

13 x 5 13 x 5

468 500

17 x 5 17 x 5 17 x 5 17 x 5 17 x 5 17 x 5

426 476 536 570 606 776

21 x 6 21 x 6 21 x 6 21 x 6 21 x 6 21 x 6 21 x 6 21 x 6

530 600 610 675 770 870 970 1220

22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8 22 x 8

485 525 565 650 700 750 800 850 900 950 1000 1060 1185

26 x 8 26 x 8 26 x 8 26 x 8 26 x 8 26 x 8 26 x 8 26 x 8 26 x 8

655 672 710 750 762 800 862 962 1082

ISO Designation (Pitch length)

W 16 W 16 W 16 W 16 W 16 W 16

450 500 560 600 630 800

W 20 560 W 20 630 W 20 640 W 20 710 W 20 800 W 20 900 W 20 1000 W 20 1250

W 25 690 W 25 710 W 25 750 W 25 790 W 25 800 W 25 840 W 25 900 W 25 1000 W 25 1120

Double Cogged Variable Speed Belts on request.

£/each

Euro/each

Section (mm)

Inside length (mm)

28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8 28 x 8

600 650 700 750 800 850 900 950 1000 1060 1120 1180 1250 1320 1400 1450 1500

30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10 30 x 10

650 665 700 800 850 875 900 950 1000 1035 1050 1120 1200 1320 1340 1500 1600

32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10 32 x 10

750 790 820 850 900 950 1000 1073 1120 1180 1200 1353

ISO Designation (Pitch length)

£/each

W31.5 800 W31.5 840 W31.5 870 W31.5 900 W31.5 950 W31.5 1000 W31.5 1050 W31.5 1120 W31.5 1170 W31.5 1230 W31.5 1250 W31.5 1400

27

Moulded Cogged Raw Edge Variable Speed Belts

Euro/each

28

Section (mm)

Inside length (mm)

37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10 37 x 10

660 800 850 900 950 1000 1020 1060 1120 1180 1250 1320 1400 1500 1600 1700 1800

41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13 41 x 13

925 1000 1040 1060 1120 1180 1190 1250 1340 1440 1600 1740 1940

47 x 13 47 x 13 47 x 13 47 x 13 47 x 13 47 x 13 47 x 13 47 x 13 47 x 13 47 x 13 47 x 13

1000 1060 1120 1180 1250 1320 1400 1500 1600 1700 1800

ISO Designation (Pitch length)

W 40 990 W 40 1060 W 40 1100 W 40 1120 W 40 1180 W 40 1240 W 40 1250 W 40 1310 W 40 1400 W 40 1500 W 40 1660 W 40 1800 W 40 2000

£/each

Euro/each

Section (mm)

Inside length (mm)

ISO Designation (Pitch length)

52 x 16 52 x 16 52 x 16 52 x 16 52 x 16 52 x 16 52 x 16 52 x 16 52 x 16 52 x 16

1180 1250 1325 1400 1525 1600 1725 1925 2165 2240

W 50 1250 W 50 1320 W 50 1400 W 50 1480 W 50 1600 W 50 1680 W 50 1800 W 50 2000 W 50 2240 W 50 2320

55 x 16 55 x 16 55 x 16 55 x 16 55 x 16

1400 1500 1600 1700 1800

65 x 20 65 x 20

1706 1906

70 x 18 70 x 18 70 x 18 70 x 18 70 x 18 70 x 18 70 x 18

1600 1700 1800 1900 2000 2240 2500

£/each

W 63 1800 W 63 2000

Double Cogged Variable Speed Belts on request.

Moulded Cogged Raw Edge Variable Speed Belts to USA-Standard RMA/MPTA

Euro/ each

RMA/MPTADesignation

£/ each

Euro/ each

RMA/MPTADesignation

1422 V 235 1422 V 240 1422 V 270 1422 V 290 1422 V 300 1422 V 330 1422 V 340 1422 V 360 1422 V 400 1422 V 420 1422 V 440 1422 V 460 1422 V 470 1422 V 480 1422 V 540 1422 V 600 1422 V 660

2322 V 329 2322 V 347 2322 V 364 2322 V 396 2322 V 421 2322 V 434 2322 V 441 2322 V 461 2322 V 481 2322 V 486 2322 V 521 2322 V 541 2322 V 601 2322 V 661 2322 V 681 2322 V 701 2322 V 801

1430 V 215

2426 V 353 2426 V 363

1922 V 277 1922 V 282 1922 V 298 1922 V 321 1922 V 332 1922 V 338 1922 V 363 1922 V 381 1922 V 386 1922 V 403 1922 V 426 1922 V 443 1922 V 454 1922 V 460 1922 V 484 1922 V 526 1922 V 544 1922 V 604 1922 V 630 1922 V 646 1922 V 666 1922 V 686 1922 V 706 1922 V 721 1922 V 726 1922 V 751 1922 V 756

2530 V 500 2530 V 530 2530 V 560 2530 V 600 2530 V 630 2530 V 670 2530 V 710 2530 V 750 2530 V 790 2530 V 800 2530 V 934 2530 V 990 2830 V 337 2830 V 363 2830 V 366 2830 V 367 2830 V 393 2830 V 396 2830 V 422 2926 V 471 2926 V 486 2926 V 521 2926 V 546 2926 V 574 2926 V 586 2926 V 606 2926 V 616 2926 V 636 2926 V 646 2926 V 666 2926 V 686 2926 V 726 2926 V 750 2926 V 776 2926 V 786

1926 V 250 1926 V 275 1926 V 290 1926 V 407 1926 V 415 1926 V 427 2230 V 266 2230 V 273 2230 V 275 2230 V 326 2230 V 375

£/ each

Euro/ each

RMA/MPTADesignation

£/ each

3226 V 392 3226 V 400 3226 V 433 3226 V 450 3226 V 505 3226 V 545 3226 V 585 3226 V 603 3226 V 650 3226 V 663 3226 V 723 3226 V 783 3226 V 843

Euro/ each

RMA/MPTADesignation

£/ each

4436 V 525 4436 V 551 4436 V 561 4436 V 576 4436 V 646 4436 V 750

3230 V 419 3230 V 528 3230 V 560 3230 V 585 3230 V 600 3230 V 630 3230 V 670 3230 V 710 3230 V 723 3230 V 750 3230 V 800 3230 V 850 3432 V 450 3432 V 456 3432 V 480 3432 V 528 3432 V 534 4036 V 541 4036 V 574 4430 V 530 4430 V 548 4430 V 555 4430 V 560 4430 V 570 4430 V 578 4430 V 600 4430 V 610 4430 V 630 4430 V 652 4430 V 660 4430 V 670 4430 V 690 4430 V 700 4430 V 710 4430 V 730 4430 V 750 4430 V 790 4430 V 800 4430 V 850

Interpretation 1422 V 235 14 = top width 14/16” 22 = Pulley angle degrees V = Variable Speed 235 = Pitch length in 1/10”

Non Stock Items – Minimum quantities on request. Double Cogged Variable Speed Belts on request.

29

Moulded Cogged Raw Edge Variable Speed Belts (Non Standard Sizes) Belt thickness (mm) Belt width (mm)

5, 6, 7 10 - 15 Euro/ each

£/ each

16 - 20 Euro/ each

8, 9 21 - 25

£/ each

Euro/ each

26 - 30 £/ each

Euro/ each

10 - 15 £/ each

Euro/ each

£/ each

500 600 700 800 900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400

Belt thickness (mm) Belt width (mm)

8, 9 16 - 20 Euro/ each

£/ each

21 - 25 Euro/ each

£/ each

26 - 30 Euro/ each

31 - 35 £/ each

Euro/ each

36 - 40 £/ each

Euro/ each

£/ each

500 600 700 800 900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400

Belt thickness (mm)

8, 9

Belt width (mm)

41 - 45 Euro/ each

600 700 800 900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 Minimum quantities on request. 30

10, 12 £/ each

16 - 20 Euro/ each

£/ each

21 - 25 Euro/ each

26 - 30 £/ each

Euro/ each

31 - 35 £/ each

Euro/ each

£/ each

Moulded Cogged Raw Edge Variable Speed Belts (Non Standard Sizes) Belt thickness (mm) Belt width (mm)

10, 12 36 - 40 Euro/ each

£/ each

41 - 45 Euro/ each

£/ each

13, 14 46 - 50

Euro/ each

51 - 55 £/ each

Euro/ each

26 - 30 £/ each

Euro/ each

£/ each

700 800 900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 2800

Belt thickness (mm) Belt width (mm)

13, 14 31 - 35 Euro/ each

£/ each

36 - 40 Euro/ each

£/ each

41 - 45 Euro/ each

46 - 50 £/ each

Euro/ each

51 - 55 £/ each

Euro/ each

£/ each

800 900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 2800 3000

Belt thickness (mm) Belt width (mm)

15, 16 26 - 30 Euro/ each

£/ each

31 - 35 Euro/ each

£/ each

36 - 40 Euro/ each

41 - 45 £/ each

Euro/ each

46 - 50 £/ each

Euro/ each

£/ each

900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 2800 3000 3200 Minimum quantities on request. 31

Moulded Cogged Raw Edge Variable Speed Belts (Non Standard Sizes) Belt thickness (mm) Belt width (mm)

15, 16 51 - 55 Euro/ each

£/ each

56 - 60 Euro/ each

61 - 65 £/ each

Euro/ each

66 - 70 £/ each

Euro/ each

71 - 75 £/ each

Euro/ each

£/ each

900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 2800 3000 3200

Belt thickness (mm)

15, 16

Belt width (mm)

76 - 80 Euro/ each

£/ each

18, 20 41 - 45 Euro/ each

46 - 50 £/ each

Euro/ each

51 - 55 £/ each

Euro/ each

56 - 60 £/ each

Euro/ each

£/ each

900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 2800 3000 3200

Belt thickness (mm) Belt width (mm)

18, 20 61 - 65 Euro/ each

900 1000 1120 1250 1400 1500 1600 1700 1800 2000 2240 2400 2600 2800 3000 3200 Minimum quantities on request. 32

£/ each

66 - 70 Euro/ each

22, 23 71 - 75

£/ each

Euro/ each

76 - 80 £/ each

Euro/ each

41 - 45 £/ each

Euro/ each

£/ each

Moulded Cogged Raw Edge Variable Speed Belts (Non Standard Sizes) Belt thickness (mm) Belt width (mm)

22, 23 46 - 50 Euro/ each

£/ each

51 - 55 Euro/ each

£/ each

56 - 60 Euro/ each

61 - 65 £/ each

Euro/ each

66 - 70 £/ each

Euro/ each

£/ each

1600 1700 1800 2000 2240 2400 2600 2800 3000 3200 3400

Belt thickness (mm)

22, 23

Belt width (mm)

71-75 Euro/ each

25

76-80 £/ each

Euro/ each

81-85 £/ each

Euro/ each

51-55 £/ each

Euro/ each

56-60 £/ each

Euro/ each

£/ each

1600 1700 1800 2000 2240 2400 2600 2800 3000 3200 3400

Belt thickness (mm)

25

Belt width (mm)

61-65 Euro/ each

66-70 £/ each

Euro/ each

71-75 £/ each

Euro/ each

76-80 £/ each

Euro/ each

81-85 £/ each

Euro/ each

£/ each

1700 1800 2000 2240 2400 2600 2800 3000 3200 3400

Minimum quantities on request. 33

optibelt-KB Kraftbands with Wedge Belts

Section

Section 3V/9J Euro/ per rib

Designation (inch)

Outside length (mm)

3V 500 3V 530 3V 560 3V 600 3V 630 3V 670 3V 710 3V 750 3V 800 3V 850 3V 900 3V 950 3V 1000 3V 1060 3V 1120 3V 1180 3V 1250 3V 1320 3V 1400

9J 1270 9J 1346 9J 1422 9J 1524 9J 1600 9J 1702 9J 1803 9J 1905 9J 2032 9J 2159 9J 2286 9J 2413 9J 2540 9J 2692 9J 2845 9J 2997 9J 3175 9J 3353 9J 3556

3V/9J

5V/15J

8V/25J

bo ≈ (mm)

9,0

15,0

25,0

h ≈ (mm)

9,9

15,1

25,5

Section 5V/15J £/ per rib

Euro/ per rib

Designation (inch)

Outside length (mm)

5V 560 5V 600 5V 630 5V 670 5V 710 5V 750 5V 800 5V 850 5V 900 5V 950 5V 1000 5V 1060 5V 1120 5V 1180 5V 1250 5V 1320 5V 1400 5V 1500 5V 1600 5V 1700 5V 1800 5V 1900 5V 2000 5V 2120 5V 2240 5V 2360 5V 2500 5V 2650 5V 2800 5V 3000 5V 3150 5V 3350 5V 3550

15J 1422 15J 1524 15J 1600 15J 1702 15J 1803 15J 1905 15J 2032 15J 2159 15J 2286 15J 2413 15J 2540 15J 2692 15J 2845 15J 2997 15J 3175 15J 3353 15J 3556 15J 3810 15J 4064 15J 4318 15J 4572 15J 4826 15J 5080 15J 5385 15J 5690 15J 5994 15J 6350 15J 6731 15J 7112 15J 7620 15J 8001 15J 8509 15J 9017

Section 8V/25J £/ per rib

Euro/ per rib

Designation (inch)

Outside length (mm)

8V 1000 8V 1060 8V 1120 8V 1180 8V 1250 8V 1320 8V 1400 8V 1500 8V 1600 8V 1700 8V 1800 8V 1900 8V 2000 8V 2120 8V 2240 8V 2360 8V 2500 8V 2650 8V 2800 8V 3000 8V 3150 8V 3350 8V 3550 8V 3750 8V 4000 8V 4250 8V 4500 8V 4750

25J 2540 25J 2692 25J 2845 25J 2997 25J 3175 25J 3353 25J 3556 25J 3810 25J 4064 25J 4318 25J 4572 25J 4826 25J 5080 25J 5385 25J 5690 25J 5994 25J 6350 25J 6731 25J 7112 25J 7620 25J 8001 25J 8509 25J 9017 25J 9525 25J 10160 25J 10795 25J 11430 25J 12065

£/ per rib

Non Stock Items

Kraftbands in these sizes can be supplied with 2 to 5 ribs (no minimum quantities applicable). Maximum manufacturing length: 4 250 mm La Intermediate lengths from 1800 mm La Minimum quantities for non listed sizes: 9 with 5 ribs or 12 with 4 ribs or 16 with 3 ribs or 24 with 2 ribs or multiples thereof

Maximum manufacturing length: 10 000 mm La Intermediate lengths from 1800 mm La Minimum quantities for non listed sizes: 6 with 5 ribs or 7 with 4 ribs or 10 with 3 ribs or 15 with 2 ribs or multiples thereof

Maximum standard manufacturing: 15 000 mm La Above 15 000 up to 18 000 mm on request Intermediate lengths from 2540 mm La Minimum quantities for all sizes: 2 with 5 ribs or 2 with 4 ribs or 3 with 3 ribs or multiples thereof

Belt weight: 1 rib ≈ 0.122 kg/m

Belt weight: 1 rib ≈ 0.252 kg/m

Belt weight: 1 rib ≈ 0.693 kg/m

Minimum order quantities for Aramid constructions on request.

Minimum order quantities for Aramid constructions on request.

Minimum order quantities for Aramid constructions on request.

Kraftbands with Special Top Surface see page 43.

34

optibelt-KB Kraftbands with Wedge Belts

Section

Section SPZ Euro/ per rib

Datum length (mm)

£/ per rib

Euro/ per rib

1250 1400 1500 1600 1700 1800 1900 2000 2120 2240 2360 2500 2650 2800 3000

SPZ

SPA

bo ≈ (mm)

9,7

12,7

h ≈ (mm)

10,5

12,5

Section SPA Datum length (mm)

3150 3350 3550

Non Stock Items

£/ per rib

Euro/ per rib

Datum length (mm)

£/ per rib

Euro/ per rib

1250 1400 1500 1600 1700 1800 1900 2000 2120 2240 2360 2500 2650 2800 3000

Datum length (mm)

£/ per rib

3150 3350 3550 3750 4000 4250 4500

Non Stock Items

Further sizes on request. Intermediate sizes are available on request. Price for 2/3/4/5 ribs = Price shown multipled x 2/3/4 or 5. Optibelt Kraftbands in sections SPZ, SPA, SPB and SPC will run in standard pulleys to BS 3790, DIN 2211 and ISO 4183. Raw edge moulded cogged Kraftbands with XPZ, XPA and XPB belts are available on request.

Maximum manufacturing length: 4500 mm Ld Intermediate lengths from 2000 mm Ld Minimum quantities for all sizes: > 2050 mm 1800 up to ≤ 2050 mm 8 pieces with 5 ribs or 7 pieces with 5 ribs or 9 pieces with 4 ribs or 10 pieces with 4 ribs or 12 pieces with 3 ribs or 14 pieces with 3 ribs or 21 pieces with 2 ribs 18 pieces with 2 ribs or multiples thereof

Maximum manufacturing length: 4500 mm Ld Intermediate lengths from 1800 mm Ld Minimum quantities for all sizes: > 2050 mm 1800 up to ≤ 2050 mm 6 pieces with 5 ribs or 5 pieces with 5 ribs or 7 pieces with 4 ribs or 8 pieces with 4 ribs or 9 pieces with 3 ribs or 11 pieces with 3 ribs or 16 pieces with 2 ribs 14 pieces with 2 ribs or multiples thereof

Belt weight: 1 rib ≈ 0,120 kg/m

Belt weight: 1 rib ≈ 0,166 kg/m

Minimum order quantities for Aramid constructions on request.

Minimum order quantities for Aramid constructions on request.

Datum length Ld = Pitch length Lw/Lp

Kraftbands with Special Top Surface see page 43.

35

optibelt-KB Kraftbands with Wedge Belts

Section SPB Euro/ per rib

Datum length (mm)

£/ per rib

Euro/ per rib

2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500

Section

SPB

SPC

bo ≈ (mm)

16,5

22,0

h ≈ (mm)

15,6

22,6

Section SPC Datum length (mm)

4750 5000 5300 5600 6000 6300 6700 7100 7500 8000

£/ per rib

Euro/ per rib

Datum length (mm)

£/ per rib

Euro/ per rib

3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700

Datum length (mm)

£/ per rib

7100 7500 8000 8500 9000 9500 10000 10600 11200 11800 12500

Non Stock Items

Further sizes on request. Intermediate sizes are available on request. Price for 2/3/4/5 ribs = Price shown multiplied x 2/3/4 or 5. Optibelt Kraftbands in sections SPZ, SPA, SPB and SPC will run in standard pulleys to BS 3790, DIN 2211 and ISO 4183. Raw edge moulded cogged Kraftbands with XPZ, XPA and XPB belts are available on request.

Maximum manufacturing length: 10 000 mm Ld Intermediate lengths from 2361 Ld Minimum quantities for non listed sizes: 4 pieces with 5 ribs or 5 pieces with 4 ribs or 7 pieces with 3 ribs or 11 pieces with 2 ribs or multiples thereof

Maximum manufacturing length: 12 500 mm Ld Intermediate lengths from 2120 mm Ld Minimum quantities for all sizes: 3 pieces with 5 ribs or 4 pieces with 4 ribs or 5 pieces with 3 ribs or 8 pieces with 2 ribs or multiples thereof

Belt weight: 1 rib ≈ 0,261 kg/m

Belt weight: 1 rib ≈ 0,555 kg/m

Minimum order quantities for Aramid constructions on request.

Minimum order quantities for Aramid constructions on request.

Datum length Ld = Pitch length Lw/Lp

36

Kraftbands with Special Top Surface see page 43.

optibelt

RED POWER Kraftbands with Wedge Belts

Section

Section 3V/9J Euro/ per rib

Belt No. (inch)

Belt No. Outside length (mm)

3V 500 3V 530 3V 560 3V 600 3V 630 3V 670 3V 710 3V 750 3V 800 3V 850 3V 900 3V 950 3V 1000 3V 1060 3V 1120 3V 1180 3V 1250 3V 1320 3V 1400

9J 1270 9J 1346 9J 1422 9J 1524 9J 1600 9J 1702 9J 1803 9J 1905 9J 2032 9J 2159 9J 2286 9J 2413 9J 2540 9J 2692 9J 2845 9J 2997 9J 3175 9J 3353 9J 3556

3V/9J

5V/15J

8V/25J

bo ≈ (mm)

9,0

15,0

25,0

h ≈ (mm)

9,9

15,1

25,5

Section 5V/15J £/ per rib

Non Stock Items

Euro/ per rib

Belt No. (inch)

Belt No. Outside length (mm)

5V 560 5V 600 5V 630 5V 670 5V 710 5V 750 5V 800 5V 850 5V 900 5V 950 5V 1000 5V 1060 5V 1120 5V 1180 5V 1250 5V 1320 5V 1400 5V 1500 5V 1600 5V 1700 5V 1800 5V 1900 5V 2000 5V 2120 5V 2240 5V 2360 5V 2500 5V 2650 5V 2800 5V 3000 5V 3150

15J 1422 15J 1524 15J 1600 15J 1702 15J 1803 15J 1905 15J 2032 15J 2159 15J 2286 15J 2413 15J 2540 15J 2692 15J 2845 15J 2997 15J 3175 15J 3353 15J 3556 15J 3810 15J 4064 15J 4318 15J 4572 15J 4826 15J 5080 15J 5385 15J 5690 15J 5994 15J 6350 15J 6731 15J 7112 15J 7620 15J 8001

Section 8V/25J £/ per rib

Belt No. (inch)

Belt No. Outside length (mm)

8V 1000 8V 1060 8V 1120 8V 1180 8V 1250 8V 1320 8V 1400 8V 1500 8V 1600 8V 1700 8V 1800 8V 1900 8V 2000 8V 2120 8V 2240 8V 2360 8V 2500 8V 2650 8V 2800 8V 3000 8V 3150 8V 3350

25J 2540 25J 2692 25J 2845 25J 2997 25J 3175 25J 3353 25J 3556 25J 3810 25J 4064 25J 4318 25J 4572 25J 4826 25J 5080 25J 5385 25J 5690 25J 5994 25J 6350 25J 6731 25J 7112 25J 7620 25J 8001 25J 8509

Euro/ per rib

£/ per rib

Non Stock Items

Non Stock Items

Further sizes on request. Price for 2/3/4/5 ribs = Price shown multiplied x 2/3/4 or 5.

Maximum manufacturing length: 4 000 mm La Intermediate lengths from 1270 mm La Minimum quantities for all sizes: 1270 to 2032 mm La 19 pieces with 5 ribs or 24 pieces with 4 ribs or 32 pieces with 3 ribs or 48 pieces with 2 ribs or multiples thereof

Maximum manufacturing length: 8000 mm La Intermediate lengths from 1422 mm La Minimum quantities for all sizes: 1270 to 2032 mm La 12 pieces with 5 ribs or 15 pieces with 4 ribs or 20 pieces with 3 ribs or 30 pieces with 2 ribs or multiples thereof

Over 2032 mm La 23 pieces with 5 ribs or 29 pieces with 4 ribs or 38 pieces with 3 ribs or 58 pieces with 2 ribs or multiples thereof

Over 2032 mm La 13 pieces with 5 ribs or 16 pieces with 4 ribs or 22 pieces with 3 ribs or 33 pieces with 2 ribs or multiples thereof

Belt weight: 1 rib ≈ 0,102 kg/m

Belt weight: 1 rib ≈ 0,252 kg/m

Maximum manufacturing length: 8 500 mm La Intermediate lengths from 2540 mm La Minimum quantities for all sizes: 8 pieces with 5 ribs or 10 pieces with 4 ribs or 13 pieces with 3 ribs or 20 pieces with 2 ribs or multiples thereof Belt weight: 1 rib ≈ 0,693 kg/m

37

optibelt

RED POWER Kraftbands with Wedge Belts

Section SPB Euro/ per rib

Datum length (mm)

Section

SPB

SPC

bo ≈ (mm)

16,5

22,0

h ≈ (mm)

15,6

22,6

Section SPC £/ per rib

Euro/ per rib

Datum length (mm)

2000 2120 2240 2360 2500 2650 2800 3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700 7100 7500 8000

3000 3150 3350 3550 3750 4000 4250 4500 4750 5000 5300 5600 6000 6300 6700 7100 7500 8000

Non Stock Items

Non Stock Items

£/ per rib

Optibelt-Kraftbands in sections SPZ, SPA and SPC will run in standard pulleys to BS 3790, DIN 2211 and ISO 4183. Further sizes on request. Price for 2/3/4/5 ribs = Price shown multiplied x 2/3/4 or 5.

Maximum manufacturing length: 8 000 mm Ld Intermediate lengths from 2000 mm Ld Minimum quantities for all sizes: 12 pieces with 5 ribs or 15 pieces with 4 ribs or 20 pieces with 3 ribs or 30 pieces with 2 ribs or multiples thereof

Maximum manufacturing length: 8 000 mm Ld Intermediate lengths from 3000 mm Ld Minimum quantities for all sizes: 8 pieces with 5 ribs or 11 pieces with 4 ribs or 14 pieces with 3 ribs or 22 pieces with 2 ribs or multiples thereof

Belt weight: 1 rib ≈ 0,261 kg/m

Belt weight: 1 rib ≈ 0,555 kg/m

Datum length Ld = Pitch length Lw/Lp

38

Further sizes on request.

optibelt-KB Kraftbands with V-Belts

Section A/HA Euro/ per rib

Section

A/HA

B/HB

bo ≈ (mm)

13,0

17,0

h ≈ (mm)

9,9

13,0

Section B/HB

Section A

Section HA

Inside length

Outside length

£/ per rib

Euro/ per rib

Section B

Section HB

Inside length

Outside length

Belt No.

(mm)

(mm)

Belt No.

(mm)

(mm)

47 51 56 57 59 64 67 71 75 79 88 98 100 104 112 120 128 144 158 167 187

1200 1300 1422 1450 1500 1625 1700 1800 1900 2000 2240 2500 2540 2650 2845 3048 3250 3658 4000 4250 4750

1236 1336 1458 1486 1536 1661 1736 1836 1936 2036 2276 2536 2576 2686 2881 3084 3286 3694 4036 4286 4786

47 51 55 59 61 63 64 67 71 73 75 79 83 88 91 941/2 98 102 106 112 118 120 128 132 140 146 148 158 167 177 187 197 208 220

1200 1300 1400 1500 1550 1600 1625 1700 1800 1850 1900 2000 2100 2240 2300 2400 2500 2600 2700 2845 3000 3048 3250 3350 3550 3700 3750 4000 4250 4500 4750 5000 5300 5600

1262 1362 1462 1562 1612 1662 1687 1762 1862 1912 1962 2062 2162 2302 2362 2462 2562 2662 2762 2907 3062 3110 3312 3412 3612 3762 3812 4062 4312 4562 4812 5062 5362 5662

£/ per rib

Moulded Cogged Raw Edge Kraftbands sections AX/HAX and BX/HBX on request. Price for 2/3/4/5 ribs = Price shown multiplied 2/3/4 or 5. Further sizes on request.

Maximum manufacturing length: 8 000 mm Li Intermediate lengths from 1800 mm Li Minimum quantities for non listed sizes: 1200 up to 2000 mm Li 6 pieces with 5 ribs or 8 pieces with 4 ribs or 10 pieces with 3 ribs or 16 pieces with 2 ribs or multiples thereof 2001 to 8000 mm Li 6 pieces with 5 ribs or 8 pieces with 4 ribs or 11 pieces with 3 ribs or 16 pieces with 2 ribs or multiples thereof Belt weight: 1 rib ≈ 0,163 kg/m

Maximum manufacturing length: 10 000 mm Li Intermediate lengths from 1800 mm Li Minimum quantities for non listed sizes: 5 pieces with 5 ribs or 6 pieces with 4 ribs or 9 pieces with 3 ribs or 13 pieces with 2 ribs or multiples thereof Belt weight: 1 rib ≈ 0,266 kg/m Minimum order quantities for Aramid constructions on request.

Minimum order quantities for Aramid constructions on request.

Kraftbands with Special Top Surface see page 43.

39

optibelt-KB Kraftbands with V-Belts

Section C/HC Euro/ per rib

Section

C/HC

D/HD

bo ≈ (mm)

22,0

32,0

h ≈ (mm)

16,2

22,4

Section D/HD

Section C

Section HC

Inside length

Outside length

£/ per rib

Euro/ per rib

Section D

Section HD

Inside length

Outside length

Belt No.

(mm)

(mm)

Belt No.

(mm)

(mm)

90 98 108 120 128 140 146 151 167 177 187 197 208 220 236 248

2286 2500 2750 3048 3250 3550 3700 3850 4250 4500 4750 5000 5300 5600 6000 6300

2361 2575 2825 3123 3325 3625 3775 3925 4325 4575 4825 5075 5375 5675 6075 6375

98 110 120 128 144 158 162 173 180 195 210 225 240 255 270 285 300 315 330 345 360 390 420 450 480 540 600 660 700

2500 2800 3048 3250 3658 4000 4115 4394 4572 4953 5334 5715 6096 6477 6858 7239 7620 8000 8382 8763 9144 9906 10668 11430 12200 13716 15240 16764 17780

2611 2911 3159 3361 3769 4111 4226 4505 4683 5064 5445 5826 6207 6588 6969 7350 7731 8111 8493 8874 9255 10017 10779 11541 12311 13827 15351 16875 17891

Non Stock Items

Price for 2/3/4/5 ribs = Price shown multiplied 2/3/4 or 5. Further sizes on request.

Maximum manufacturing length: 12 000 mm Li Intermediate lengths from 2286 mm Li Minimum quantities for non listed sizes: 10 001 to 12 000 mm Li 2050 to 10 000 mm Li 4 pieces with 5 ribs or 3 pieces with 5 ribs or 4 pieces with 4 ribs or 5 pieces with 4 ribs or 5 pieces with 3 ribs or 6 pieces with 3 ribs or 10 pieces with 2 ribs 8 pieces with 2 ribs or multiples thereof or multiples thereof Belt weight: 1 rib ≈ 0,447 kg/m Minimum order quantities for Aramid constructions on request.

Kraftbands with Special Top Surface see page 43.

40

Maximum manufacturing length: 12 200 mm Li Intermediate lengths from 2500 mm Li Minimum quantities for non listed sizes: 2 pieces with 5 ribs or 2 pieces with 4 ribs or 3 pieces with 3 ribs or 5 pieces with 2 ribs or multiples thereof Belt weight: 1 rib ≈ 0,798 kg/m Minimum order quantities for Aramid constructions on request.

£/ per rib

optibelt-KBX Kraftbands with Wedge Belts

Section

Section 3VX/9JX Euro per rib

Belt Number (inch)

Belt No. Outside length (mm)

3VX 500 3VX 530 3VX 560 3VX 600 3VX 630 3VX 670 3VX 710 3VX 750 3VX 800 3VX 850 3VX 900 3VX 950 3VX 1000 3VX 1060 3VX 1120 3VX 1180 3VX 1250 3VX 1320 3VX 1400

9JX 1270 9JX 1346 9JX 1422 9JX 1524 9JX 1600 9JX 1702 9JX 1803 9JX 1905 9JX 2032 9JX 2159 9JX 2286 9JX 2413 9JX 2540 9JX 2692 9JX 2845 9JX 2997 9JX 3175 9JX 3353 9JX 3556

Non Stock Items

3VX/9JX 5VX/15JX

bo ≈ (mm)

9,0

15,0

h ≈ (mm)

9,9

15,1

Section 5VX/15JX £ per rib

Euro per rib

Belt Number (inch)

Belt No. Outside length (mm)

5VX 500 5VX 530 5VX 560 5VX 600 5VX 630 5VX 670 5VX 710 5VX 750 5VX 800 5VX 850 5VX 900 5VX 950 5VX 1000 5VX 1060 5VX 1120 5VX 1180 5VX 1250 5VX 1320 5VX 1400

15JX 1270 15JX 1346 15JX 1422 15JX 1524 15JX 1600 15JX 1702 15JX 1803 15JX 1905 15JX 2032 15JX 2159 15JX 2286 15JX 2413 15JX 2540 15JX 2692 15JX 2845 15JX 2997 15JX 3175 15JX 3353 15JX 3556

£ per rib

Non Stock Items

Further sizes on request. Price for 2/3/4/5 ribs = Price shown multiplied 2/3/4 or 5.

Minimum quantities for all sizes on request:

Minimum quantities for all sizes on request:

Belt weight: 1 rib ≈ 0,117 kg/m

Belt weight: 1 rib ≈ 0,241 kg/m

41

optibelt-PKR Endless V-Belts with Patterned Top Surfaces

PKR 0

PKR 1

Height of patterns

PKR 5

Temperature resistannce (°C)

Quality/Colour

(mm)

Width of groove (mm)

5

—

—

SBR-NR/light

- 40 up to + 70 ≈ 55/65*

3

5

10

—

CR/black

- 25 up to + 100

PKR 2

3

5

—

—

PKR 5

5

—

13

—

Patterns

Pitch

PKR 2

Standard (mm)

max. (mm)

PKR 0

3

PKR 1

Standard Section height (mm)

Standard inside length (mm)

PKR 0 PKR 1 PKR 2 PKR 5

Staining

no

no

limited

yes

SBR = Styrene-Butadiene Rubber NR = Natural Rubber CR = Chloroprene Rubber

Minimum quatities for Endless V-Belts Patterned Top Surfaces PKR 0; PKR 1; PKR 2; PKR 5

Patterns

≈ 65

Oil resistant

* ≈ 55 for surface above normal section height ≈ 65 for surface within surface height

Height of patterns 3 or 5 mm above standard height

Patterned top surfaces added to normal belt thickness

Hardness (Shore A)

for standardrange (see pages 15 to 19 of this Price List)

for intermediate lengths (lengths not shown in this Price List) or special constructions

Patterned top surfaces added to normal belt thickness Patterns Standard inside length (mm)

Minimum quanPKR 0 PKR 2 tities

8,0

1200 ≤ 50001)

●

●

●

—

18 pcs.

31 pcs.

3550 ≤ 100001)

●

●

10

B/17 11,0

1200 ≤ 20001) 2001 ≤ 71001)

● ●

● ●

● ●

— —

15 pcs. 15 pcs.

50 pcs. 42 pcs.

2850 ≤ 210001)

●

●

10

20

12,5

1850 ≤ 20002) 2001 ≤ 80002)

● ●

● ●

● ●

— —

13 pcs. 13 pcs.

21 pcs. 36 pcs.

3550 ≤ 210001)

●

●

8

C/22 14,0

1850 ≤ 20002) 2001 ≤ 100002)

● ●

● ●

● ●

— —

12 pcs. 12 pcs.

57 pcs. 48 pcs.

3550 ≤ 210001)

●

●

8

25

16,0

1850 ≤ 20002) 2001 ≤ 100002)

● ●

● ●

● ●

— —

11 pcs. 11 pcs.

51 pcs. 42 pcs.

2850 ≤ 210001)

●

●

8

D/32 20,0

2850 ≤ 125002) 2850 ≤ 125002)

● —

● —

● —

— ●3)

9 pcs. 8 pcs.

22 pcs. 8 pcs.

2850 ≤ 210001)

●

●

6

E/40 25,0

—

—

—

—

—

on request

on request

4 000 ≤ 21 0001)

●

●

5

A/13

1) Maximum production length on request.. 3) only in CR/black.

2) Maximum production length 21000 mm.

Length range/prices: see pages 15 to 19: + 200 % surcharge. Surcharges for special belt constructions on request. The addition of patterned top surfaces to belts alters the section thickness and the section identification as follows. Section B/17 – surface within the section thickness = 17 x 11 Section B/17 – 3 mm surface added to section thickness = 17 x 14 Section B/17 – 5 mm surface added to section thickness = 17 x 16

42

CR/black on request.

Section Z/10 on request.

optibelt-KB Kraftbands with Special Top Surfaces

PKR 2

PKR 3

Quality/Colour

Temperature resistance (°C)

Hardness (Shore A)

Oil resistant

Staining

(mm)

Width of Groove (mm)

5

—

—

SBR-NR/light

- 40 up to + 70

≈ 55

no

no

3

5

10

—

CR/black

- 25 up to + 100

≈ 65

limited

yes

PKR 2

3

5

—

—

PKR 3

5

—

—

3,7

Height of patterns Patterns

Pitch

Standard (mm)

maximal (mm)

PKR 0

3

PKR 1

Section

Dimensions of the basic belt = Width x Height (mm)

Kraftband height without surface (mm)

Length designation

SBR = Styrene-Butadiene Rubber NR = Natural Rubber CR = Chloroprene Rubber

Length (mm)

Max. production length (mm)

Patterns PKR 0

PKR 1

PKR 2

PKR 3

9x 8

9,9

500 ≤ 1400

1400 ≤ 3556 La

4250

●

●

●

—

5V/15J

15 x 13

15,1

500 ≤ 3550

1400 ≤ 9017 La

10000

●

●

●

—

8V/25J

25 x 23

25,5

1000 ≤ 4750

2540 ≤ 12065 La

15000

●

●

●

—

16,3 x 13

15,6

—

2400 ≤ 6000 Ld

6000

●

●

●

—

1400 ≤ 5000 Li

8000

●

●

●

—

13 x 8

9,9

— 2850 ≤ 8000 Li

on request

—

—

—

●

3V/9J

SPB

A/HA

B/HB

17 x 11

13,0

—

1400 ≤ 7 100 Li

10000

●

●

●

—

C/HC

22 x 14

16,2

—

2050 ≤ 7 100 Li

12000

●

●

●

—

La = Outside length Li = Inside length; Ld = Datum length.

Length range and prices: see pages 39 to 40 + 60% surcharge. Minimum quantities on request.

43

optibelt-ZR Timing Belts

Type MXL

(nominal dimensions – mm)

Type MXL - pitch 2,032 mm Belt No.

360 MXL 432 MXL• 440 MXL 448 MXL• 456 MXL• 464 MXL• 480 MXL 488 MXL• 536 MXL• 544 MXL• 560 MXL• 568 MXL• 576 MXL• 600 MXL• 608 MXL• 632 MXL• 640 MXL 656 MXL• 664 MXL• 672 MXL• 680 MXL• 704 MXL• 720 MXL• 736 MXL• 752 MXL• 760 MXL• 776 MXL• 784 MXL• 800 MXL• 808 MXL• 816 MXL• 824 MXL• 840 MXL• 848 MXL• 856 MXL• 864 MXL• 880 MXL 896 MXL• 904 MXL• 912 MXL• 920 MXL• 960 MXL• 976 MXL• 984 MXL• 1000 MXL• 1008 MXL• 1040 MXL• 1056 MXL• 1072 MXL• 1080 MXL• 1112 MXL• 1120 MXL 1136 MXL• 1176 MXL• 1184 MXL•

44

Pitch length

(inch)

(mm)

3,60 4,32 4,40 4,48 4,56 4,64 4,80 4,88 5,36 5,44 5,60 5,68 5,76 6,00 6,08 6,32 6,40 6,56 6,64 6,72 6,80 7,04 7,20 7,36 7,52 7,60 7,76 7,84 8,00 8,08 8,16 8,24 8,40 8,48 8,56 8,64 8,80 8,96 9,04 9,12 9,20 9,60 9,76 9,84 10,00 10,08 10,40 10,56 10,72 10,80 11,12 11,20 11,36 11,76 11,84

91,44 109,73 111,76 113,79 115,82 117,86 121,92 123,95 136,14 138,18 142,24 144,27 146,30 152,40 154,43 160,53 162,56 166,62 168,66 170,69 172,72 178,82 182,88 186,94 191,01 193,04 197,10 199,14 203,20 205,23 207,26 209,30 213,36 215,39 217,42 219,46 223,52 227,58 229,62 231,65 233,68 243,84 247,90 249,94 254,00 256,03 264,16 268,22 272,29 274,32 282,45 284,48 288,54 298,70 300,74

Further sizes on request.

Number of teeth

1/8" width ≈ 3,175 mm Code No. 012 Euro/each

£/each

3/16" width ≈ 4,763 mm Code No. 019 Euro/each

£/each

1/4" width ≈ 6,35 mm Code No. 025 Euro/each

£/each

45 54 55 56 57 58 60 61 67 68 70 71 72 75 76 79 80 82 83 84 85 88 90 92 94 95 97 98 100 101 102 103 105 106 107 108 110 112 113 114 115 120 122 123 125 126 130 132 134 135 139 140 142 147 148 • Non stock items, minimum order quantity: 2 sleeves.

Sleeves are available on request. Sleeve width: 470 mm.

optibelt-ZR Timing Belts

Type MXL

(nominal dimensions – mm)

Type MXL - pitch 2,032 mm Pitch length

Belt No.

(inch)

1200 MXL• 1224 MXL• 1272 MXL• 1280 MXL• 1320 MXL• 1360 MXL• 1400 MXL 1440 MXL• 1472 MXL• 1520 MXL• 1560 MXL• 1600 MXL• 1768 MXL• 1800 MXL• 1888 MXL• 1984 MXL• 1992 MXL• 2008 MXL• 2048 MXL• 2144 MXL• 2240 MXL• 2280 MXL• 2384 MXL• 2480 MXL• 2520 MXL• 2680 MXL• 2776 MXL• 2824 MXL• 2880 MXL• 2920 MXL• 3200 MXL• 3472 MXL• 3624 MXL• 3704 MXL• 3984 MXL• 4040 MXL•

12,00 12,24 12,72 12,80 13,20 13,60 14,00 14,40 14,72 15,20 15,60 16,00 17,68 18,00 18,88 19,84 19,92 20,08 20,48 21,44 22,40 22,80 23,84 24,80 25,20 26,80 27,76 28,24 28,80 29,20 32,00 34,72 36,24 37,04 39,84 40,40

Further sizes on request.

Number of teeth

Euro/each

(mm)

304,80 310,90 323,09 325,12 335,28 345,44 355,60 365,76 373,89 386,08 396,24 406,40 449,07 457,20 479,55 503,94 505,97 510,03 520,19 544,58 568,96 579,12 605,54 629,92 640,08 680,72 705,10 717,30 731,52 741,68 812,80 881,89 920,50 940,82 1011,94 1026,16

1/8" width ≈ 3,175 mm Code No. 012 £/each

3/16" width ≈ 4,763 mm Code No. 019 Euro/each

£/each

1/4" width ≈ 6,35 mm Code No. 025 Euro/each

£/each

150 153 159 160 165 170 175 180 184 190 195 200 221 225 236 248 249 251 256 268 280 285 298 310 315 335 347 353 360 365 400 434 453 463 498 505

• Non stock items, minimum order quantity: 2 sleeves.

Sleeves are available on request. Sleeve width: 470 mm.

45

optibelt-ZR Timing Belts

Type XL

(nominal dimensions – mm)

Type XL - pitch 5,08 mm Belt No.

60 XL 70 XL 80 XL 86 XL• 88 XL• 90 XL 92 XL• 94 XL• 96 XL• 100 XL 102 XL• 106 XL• 108 XL• 110 XL 112 XL• 116 XL• 118 XL• 120 XL 124 XL• 126 XL• 128 XL• 130 XL 134 XL• 136 XL• 138 XL• 140 XL 148 XL• 150 XL 156 XL• 160 XL 162 XL• 168 XL• 170 XL 174 XL• 176 XL• 178 XL• 180 XL 182 XL• 184 XL• 188 XL• 190 XL 192 XL• 196 XL• 200 XL 210 XL 220 XL 230 XL 240 XL 244 XL• 248 XL• 250 XL 260 XL 270 XL 272 XL• 274 XL•

46

Pitch length

Number of teeth

Euro/each

(inch)

(mm)

6,00 7,00 8,00 8,60 8,80 9,00 9,20 9,40 9,60 10,00 10,20 10,60 10,80 11,00 11,20 11,60 11,80 12,00 12,40 12,60 12,80 13,00 13,40 13,60 13,80 14,00 14,80 15,00 15,60 16,00 16,20 16,80 17,00 17,40 17,60 17,80 18,00 18,20 18,40 18,80 19,00 19,20 19,60 20,00 21,00 22,00 23,00 24,00 24,40 24,80 25,00 26,00 27,00 27,20 27,40

152,40 177,80 203,20 218,44 223,52 228,60 233,68 238,76 243,84 254,00 259,08 269,24 274,32 279,40 284,48 294,64 299,72 304,80 314,96 320,04 325,12 330,20 340,36 345,44 350,52 355,60 375,92 381,00 396,24 406,40 411,48 426,72 431,80 441,96 447,04 452,12 457,20 462,28 467,36 477,52 482,60 487,68 497,84 508,00 533,40 558,80 584,20 609,60 619,76 629,92 635,00 660,40 685,80 690,88 695,96

Further sizes on request.

1/4" width ≈ 6,35 mm Code No. 025 £/each

5/16" width ≈ 7,94 mm Code No. 031 Euro/each

£/each

3/8" width ≈ 9,53 mm Code No. 037 Euro/each

£/each

30 35 40 43 44 45 46 47 48 50 51 53 54 55 56 58 59 60 62 63 64 65 67 68 69 70 74 75 78 80 81 84 85 87 88 89 90 91 92 94 95 96 98 100 105 110 115 120 122 124 125 130 135 136 137

• Non stock items, minimum order quantity: 2 sleeves.

Sleeves are available on request. Sleeve width: 470 mm.

optibelt-ZR Timing Belts

Type XL

(nominal dimensions – mm)

Type XL - pitch 5,08 mm Pitch length

Belt No.

280 XL 286 XL• 290 XL 296 XL• 300 XL 306 XL• 310 XL 316 XL 322 XL 330 XL 340 XL• 344 XL• 350 XL• 380 XL• 382 XL• 388 XL• 390 XL 392 XL• 412 XL 414 XL• 438 XL• 460 XL• 498 XL• 506 XL• 514 XL• 580 XL• 630 XL•

(inch)

(mm)

28,00 28,60 29,00 29,60 30,00 30,60 31,00 31,60 32,20 33,00 34,00 34,40 35,00 38,00 38,20 38,80 39,00 39,20 41,20 41,40 43,80 46,00 49,80 50,60 51,40 58,00 63,00

711,20 726,44 736,60 751,84 762,00 777,24 787,40 802,64 817,88 838,20 863,60 873,76 889,00 965,20 970,28 985,52 990,60 995,68 1046,48 1051,56 1112,52 1168,40 1264,92 1285,24 1305,56 1473,20 1600,20

Further sizes on request.

Number of teeth

1/4" width ≈ 6,35 mm Code No. 025 Euro/each

£/each

5/16" width ≈ 7,94 mm Code No. 031 Euro/each

£/each

3/8" width ≈ 9,53 mm Code No. 037 Euro/each

£/each

140 143 145 148 150 153 155 158 161 165 170 172 175 190 191 194 195 196 206 207 219 230 249 253 257 290 315

• Non stock items, minimum order quantity: 2 sleeves.

Sleeves are available on request. Sleeve width: 470 mm.

47

optibelt-ZR Timing Belts

Type L (nominal dimensions – mm)

Type L - pitch 9,525 mm Belt No.

109 L 124 L 150 L 169 L 187 L 210 L 225 L 236 L 240 L 255 L 270 L 285 L 300 L 322 L 345 L 367 L 390 L 405 L 420 L 450 L 454 L 480 L 510 L 540 L 600 L 660 L

48

Pitch length

(inch)

(mm)

10,88 12,38 15,00 16,88 18,75 21,00 22,50 23,63 24,00 25,50 27,00 28,50 30,00 32,25 34,50 36,75 39,00 40,50 42,00 45,00 45,38 48,00 51,00 54,00 60,00 66,00

276,23 314,33 381,00 428,63 476,25 533,40 571,50 600,08 609,60 647,70 685,80 723,90 762,00 819,15 876,30 933,45 990,60 1028,70 1066,80 1143,00 1152,53 1219,20 1295,40 1371,60 1524,00 1676,40

Number of teeth

1/2" width ≈ 12,7 mm Code No. 050 Euro/each

£/each

3/4" width ≈ 19,05 mm Code No. 075 Euro/each

£/each

1" width ≈ 25,4 mm Code No. 100 Euro/each

£/each

29 33 40 45 50 56 60 63 64 68 72 76 80 86 92 98 104 108 112 120 121 128 136 144 160 176

Further sizes on request.

Subject to change of sleeve widths.

optibelt-ZR Timing Belts

Type H (nominal dimensions – mm)

Type H - pitch 12,7 mm Pitch length

Belt No.

230 H 240 H 255 H 270 H 280 H 300 H 330 H 335 H 360 H 370 H 390 H 400 H 420 H 430 H 450 H 465 H 480 H 510 H 540 H 560 H 570 H 600 H 630 H 660 H 680 H 700 H 730 H 750 H 770 H 800 H 850 H 860 H 900 H 950 H 1000 H 1100 H 1250 H 1400 H 1700 H

(inch)

(mm)

23,00 24,00 25,50 27,00 28,00 30,00 33,00 33,50 36,00 37,00 39,00 40,00 42,00 43,00 45,00 46,50 48,00 51,00 54,00 56,00 57,00 60,00 63,00 66,00 68,00 70,00 73,00 75,00 77,00 80,00 85,00 86,00 90,00 95,00 100,00 110,00 125,00 140,00 170,00

584,20 609,60 647,70 685,80 711,20 762,00 838,20 850,90 914,40 939,80 990,60 1016,00 1066,80 1092,20 1143,00 1181,10 1219,20 1295,40 1371,60 1422,40 1447,80 1524,00 1600,20 1676,40 1727,20 1778,00 1854,20 1905,00 1955,80 2032,00 2159,00 2184,40 2286,00 2413,00 2540,00 2794,00 3175,00 3556,00 4318,00

Further sizes on request.

Number of teeth

3/4" width ≈ 19,05 mm Code No. 075 Euro/ each

£/ each

1" width ≈ 25,4 mm Code No. 100 Euro/ each

£/ each

1 1/2" width ≈ 38,1 mm Code No. 150 Euro/ each

£/ each

46 48 51 54 56 60 66 67 72 74 78 80 84 86 90 93 96 102 108 112 114 120 126 132 136 140 146 150 154 160 170 172 180 190 200 220 250 280 340

Subject to change of sleeve widths.

49

optibelt-ZR Timing Belts

Type H (nominal dimensions – mm)

Type H - pitch 12,7 mm Belt No.

230 H 240 H 255 H 270 H 280 H 300 H 330 H 335 H 360 H 370 H 390 H 400 H 420 H 430 H 450 H 465 H 480 H 510 H 540 H 560 H 570 H 600 H 630 H 660 H 680 H 700 H 730 H 750 H 770 H 800 H 850 H 860 H 900 H 950 H 1000 H 1100 H 1250 H 1400 H 1700 H

50

Pitch length

(inch)

(mm)

23,00 24,00 25,50 27,00 28,00 30,00 33,00 33,50 36,00 37,00 39,00 40,00 42,00 43,00 45,00 46,50 48,00 51,00 54,00 56,00 57,00 60,00 63,00 66,00 68,00 70,00 73,00 75,00 77,00 80,00 85,00 86,00 90,00 95,00 100,00 110,00 125,00 140,00 170,00

584,20 609,60 647,70 685,80 711,20 762,00 838,20 850,90 914,40 939,80 990,60 1016,00 1066,80 1092,20 1143,00 1181,10 1219,20 1295,40 1371,60 1422,40 1447,80 1524,00 1600,20 1676,40 1727,20 1778,00 1854,20 1905,00 1955,80 2032,00 2159,00 2184,40 2286,00 2413,00 2540,00 2794,00 3175,00 3556,00 4318,00

Number of teeth

2" width ≈ 50,8 mm Code No. 200 Euro/each

3" width ≈ 76,2 mm Code No. 300 £/each

Euro/each

£/each

46 48 51 54 56 60 66 67 72 74 78 80 84 86 90 93 96 102 108 112 114 120 126 132 136 140 146 150 154 160 170 172 180 190 200 220 250 280 340

Further sizes on request.

Subject to change of sleeve widths..

optibelt-ZR Timing Belts

Type XH (nominal dimensions – mm)

Type XH - pitch 22,225 mm Pitch length

Belt No.

507 XH 560 XH 630 XH 700 XH 770 XH 840 XH 980 XH 1120 XH 1260 XH 1400 XH 1540 XH 1750 XH

(inch)

(mm)

50,75 56,00 63,00 70,00 77,00 84,00 98,00 112,00 126,00 140,00 154,00 175,00

1289,05 1422,40 1600,20 1778,00 1955,80 2133,60 2489,20 2844,80 3200,40 3556,00 3911,60 4445,00

Further sizes on request.

Number of teeth

2" width ≈ 50,8 mm Code No. 200 Euro/ each

£/ each

3" width ≈ 76,2 mm Code No. 300 Euro/ each

£/ each

4" width ≈ 101,6 mm Code No. 400 Euro/ each

£/ each

5" width ≈ 127 mm Code No. 500 Euro/ each

£/ each

58 64 72 80 88 96 112 128 144 160 176 200

Subject to change of sleeve widths.

51

optibelt-ZR Timing Belts

Type XXH

(nominal dimensions – mm)

Type XXH - pitch 31,75 mm Belt No.

700 XXH 800 XXH 900 XXH 1000 XXH 1200 XXH 1400 XXH 1600 XXH 1800 XXH

Pitch length

(inch)

(mm)

70,00 80,00 90,00 100,00 120,00 140,00 160,00 180,00

1778,00 2032,00 2286,00 2540,00 3048,00 3556,00 4064,00 4572,00

Number of teeth

2" width ≈ 50,8 mm Code No. 200 Euro/ each

3" width ≈ 76,2 mm Code No. 300

£/ each

Euro/ each

£/ each

4" width ≈ 101,6 mm Code No. 400 Euro/ each

£/ each

5" width ≈ 127 mm Code No. 500 Euro/ each

£/ each

56 64 72 80 96 112 128 144

When ordering, give belt number (belt length and pitch) and width. Example: 800 XXH 300 800 = Belt length 80.0"/2032.0 mm XXH = Type XXH – 31.75 mm pitch 300 = Belt width 3.0"/76.2 mm

optibelt-ZR D Double Timing Belts

Type D-XL (nominal dimensions – mm)

Type D-XL - pitch 5,08 mm Belt No.

150 DXL 160 DXL 170 DXL 180 DXL 190 DXL 200 DXL 210 DXL 220 DXL 230 DXL 240 DXL 250 DXL 260 DXL 280 DXL 300 DXL 310 DXL 52

Pitch length

(inch)

(mm)

15,00 16,00 17,00 18,00 19,00 20,00 21,00 22,00 23,00 24,00 25,00 26,00 28,00 30,00 31,00

381,00 406,40 431,80 457,20 482,60 508,00 533,40 558,80 584,20 609,60 635,00 660,40 711,20 762,00 787,40

Number of teeth

1/4" width ≈ 6,35 mm Code No. 025 Euro/each

£/each

5/16" width ≈ 7,94 mm Code No. 031 Euro/each

£/each

3/8" width ≈ 9,53 mm Code No. 037 Euro/each

£/each

75 80 85 90 95 100 105 110 115 120 125 130 140 150 155

D Further sizes on request.

Subject to change of sleeve widths.

optibelt-ZR D Double Timing Belts

Type D-L

Type D-H

(nominal dimensions – mm)

Type D-L - pitch 9,525 mm Pitch length

Belt No.

169 DL• 187 DL 210 DL 225 DL 240 DL 255 DL 270 DL 285 DL 300 DL 322 DL 345 DL 367 DL 390 DL 420 DL 450 DL 480 DL 510 DL 540 DL 600 DL

(inch)

(mm)

16,88 18,75 21,00 22,50 24,00 25,50 27,00 28,50 30,00 32,25 34,50 36,75 39,00 42,00 45,00 48,00 51,00 54,00 60,00

428,63 476,25 533,40 571,50 609,60 647,70 685,80 723,90 762,00 819,15 876,30 933,45 990,60 1066,80 1143,00 1219,20 1295,40 1371,60 1524,00

Number of teeth

1/2" width ≈ 12,7 mm Code No. 050 Euro/each

£/each

3/4" width ≈ 19,05 mm Code No. 075 Euro/each

£/each

1" width ≈ 25,4 mm Code No. 100 Euro/each

£/each

45 50 56 60 64 68 72 76 80 86 92 98 104 112 120 128 136 144 160

D

Type D-H - pitch 12,7 mm Belt No.

Pitch length

(inch)

240 DH 270 DH 300 DH 330 DH 360 DH 390 DH 420 DH 450 DH 480 DH 510 DH 540 DH 570 DH 600 DH 630 DH 660 DH 700 DH 750 DH 800 DH 850 DH 900 DH 1000 DH 1100 DH 1250 DH 1400 DH 1700 DH

24,00 27,00 30,00 33,00 36,00 39,00 42,00 45,00 48,00 51,00 54,00 57,00 60,00 63,00 66,00 70,00 75,00 80,00 85,00 90,00 100,00 110,00 125,00 140,00 170,00

Further sizes on request.

Number of teeth

Euro/ each

(mm)

609,60 685,80 762,00 838,20 914,40 990,60 1066,80 1143,00 1219,20 1295,40 1371,60 1447,80 1524,00 1600,20 1676,40 1778,00 1905,00 2032,00 2159,00 2286,00 2540,00 2794,00 3175,00 3556,00 4318,00

3/4" width ≈ 19,05 mm Code No. 075

48 54 60 66 72 78 84 90 96 102 108 114 120 126 132 140 150 160 170 180 200 220 250 280 340

£/ each

1" width ≈ 25,4 mm Code No. 100 Euro/ each

£/ each

1 1/2" width ≈ 38,1 mm Code No. 150 Euro/ each

£ each

2" width ≈ 50,8 mm Code No. 200 Euro/ each

£/ each

3" width ≈ 76,2 mm Code No. 300 Euro/ each

£/ each

D

Subject to change of sleeve widths.

53

optibelt

OMEGA Timing Belts

1,1

2,3

3,0 Type 3M-A (nominal dimensions mm)

Type 3M-A - pitch 3 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

111 - 3M-A 129 - 3M-A 141 - 3M-A 144 - 3M-A 150 - 3M-A 165 - 3M-A 168 - 3M-A 174 - 3M-A 177 - 3M-A 180 - 3M-A 186 - 3M-A 192 - 3M-A 195 - 3M-A 201 - 3M-A 204 - 3M-A 207 - 3M-A 210 - 3M-A 213 - 3M-A 225 - 3M-A 252 - 3M-A 255 - 3M-A 267 - 3M-A 285 - 3M-A 291 - 3M-A 300 - 3M-A 312 - 3M-A 318 - 3M-A 330 - 3M-A 339 - 3M-A 345 - 3M-A 357 - 3M-A 363 - 3M-A 366 - 3M-A 384 - 3M-A 390 - 3M-A 420 - 3M-A 447 - 3M-A 474 - 3M-A 480 - 3M-A 486 - 3M-A 495 - 3M-A 501 - 3M-A 513 - 3M-A 519 - 3M-A 522 - 3M-A 525 - 3M-A 531 - 3M-A 537 - 3M-A 558 - 3M-A 564 - 3M-A 570 - 3M-A 597 - 3M-A 600 - 3M-A 606 - 3M-A 615 - 3M-A

54

111,00 129,00 141,00 144,00 150,00 165,00 168,00 174,00 177,00 180,00 186,00 192,00 195,00 201,00 204,00 207,00 210,00 213,00 225,00 252,00 255,00 267,00 285,00 291,00 300,00 312,00 318,00 330,00 339,00 345,00 357,00 363,00 366,00 384,00 390,00 420,00 447,00 474,00 480,00 486,00 495,00 501,00 513,00 519,00 522,00 525,00 531,00 537,00 558,00 564,00 570,00 597,00 600,00 606,00 615,00

£/each

9 mm width Code No. 9 Euro/each

£/each

15 mm width Code No. 15 Euro/each

£/each

37 43 47 48 50 55 56 58 59 60 62 64 65 67 68 69 70 71 75 84 85 89 95 97 100 104 106 110 113 115 119 121 122 128 130 140 149 158 160 162 165 167 171 173 174 175 177 179 186 188 190 199 200 202 205

Further sizes on request.

optibelt

OMEGA Timing Belts

1,1

2,3

3,0 Type 3M-A (nominal dimensions mm)

Type 3M-A - pitch 3 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

633 - 3M-A 669 - 3M-A 675 - 3M-A 711 - 3M-A 738 - 3M-A 804 - 3M-A 843 - 3M-A 882 - 3M-A 888 - 3M-A 1062 - 3M-A 1569 - 3M-A

Further sizes on request.

633,00 669,00 675,00 711,00 738,00 804,00 843,00 882,00 888,00 1062,00 1569,00

£/each

9 mm width Code No. 9 Euro/each

£/each

15 mm width Code No. 15 Euro/each

£/each

211 223 225 237 246 268 281 294 296 354 523

55

optibelt

OMEGA Timing Belts

1,9

3,4

5,0 Type 5M-A (nominal dimensions mm)

Type 5M-A - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

9 mm width Code No. 9 Euro/each

180 - 5M-A 225 - 5M-A 255 - 5M-A 265 - 5M-A 270 - 5M-A 280 - 5M-A 295 - 5M-A 305 - 5M-A 325 - 5M-A 330 - 5M-A 340 - 5M-A 350 - 5M-A 360 - 5M-A 365 - 5M-A 370 - 5M-A 375 - 5M-A 385 - 5M-A 400 - 5M-A 415 - 5M-A 425 - 5M-A 450 - 5M-A 475 - 5M-A 500 - 5M-A 520 - 5M-A 525 - 5M-A 550 - 5M-A 565 - 5M-A 575 - 5M-A 580 - 5M-A 600 - 5M-A 610 - 5M-A 615 - 5M-A 630 - 5M-A 635 - 5M-A 640 - 5M-A 645 - 5M-A 665 - 5M-A 670 - 5M-A 700 - 5M-A 710 - 5M-A 740 - 5M-A 750 - 5M-A 755 - 5M-A 800 - 5M-A 825 - 5M-A 835 - 5M-A 850 - 5M-A 860 - 5M-A 890 - 5M-A 900 - 5M-A 925 - 5M-A 935 - 5M-A 950 - 5M-A 965 - 5M-A 980 - 5M-A

56

180,00 225,00 255,00 265,00 270,00 280,00 295,00 305,00 325,00 330,00 340,00 350,00 360,00 365,00 370,00 375,00 385,00 400,00 415,00 425,00 450,00 475,00 500,00 520,00 525,00 550,00 565,00 575,00 580,00 600,00 610,00 615,00 630,00 635,00 640,00 645,00 665,00 670,00 700,00 710,00 740,00 750,00 755,00 800,00 825,00 835,00 850,00 860,00 890,00 900,00 925,00 935,00 950,00 965,00 980,00

£/each

15 mm width Code No. 15 Euro/each

£/each

25 mm width Code No. 25 Euro/each

£/each

36 45 51 53 54 56 59 61 65 66 68 70 72 73 74 75 77 80 83 85 90 95 100 104 105 110 113 115 116 120 122 123 126 127 128 129 133 134 140 142 148 150 151 160 165 167 170 172 178 180 185 187 190 193 196

Further sizes on request.

optibelt

OMEGA Timing Belts

1,9

3,4

5,0 Type 5M-A (nominal dimensions mm)

Type 5M-A - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

9 mm width Code No. 9 Euro/each

1000 - 5M-A 1035 - 5M-A 1050 - 5M-A 1100 - 5M-A 1135 - 5M-A 1200 - 5M-A 1500 - 5M-A 1595 - 5M-A 1870 - 5M-A 2000 - 5M-A 2525 - 5M-A

Further sizes on request.

1000,00 1035,00 1050,00 1100,00 1135,00 1200,00 1500,00 1595,00 1870,00 2000,00 2525,00

£/each

15 mm width Code No. 15 Euro/each

£/each

25 mm width Code No. 25 Euro/each

£/each

200 207 210 220 227 240 300 319 374 400 505

57

optibelt

OMEGA Timing Belts

3,2

5,4

8,0 Type 8M-A (nominal dimensions mm)

Type 8M-A - pitch 8 mm Belt No.

Pitch length (mm)

Number of teeth

20 mm width Code No. 20 Euro/each

424 - 8M-A 480 - 8M-A 512 - 8M-A 520 - 8M-A 560 - 8M-A 576 - 8M-A 600 - 8M-A 608 - 8M-A 640 - 8M-A 656 - 8M-A 720 - 8M-A 760 - 8M-A 776 - 8M-A 784 - 8M-A 800 - 8M-A 840 - 8M-A 880 - 8M-A 920 - 8M-A 960 - 8M-A 976 - 8M-A 1000 - 8M-A 1040 - 8M-A 1080 - 8M-A 1120 - 8M-A 1128 - 8M-A 1160 - 8M-A 1200 - 8M-A 1224 - 8M-A 1256 - 8M-A 1280 - 8M-A 1304 - 8M-A 1328 - 8M-A 1360 - 8M-A 1400 - 8M-A 1424 - 8M-A 1440 - 8M-A 1520 - 8M-A 1552 - 8M-A 1600 - 8M-A 1696 - 8M-A 1760 - 8M-A 1800 - 8M-A 1904 - 8M-A 2000 - 8M-A 2080 - 8M-A 2104 - 8M-A 2240 - 8M-A 2248 - 8M-A 2272 - 8M-A 2400 - 8M-A 2600 - 8M-A 2800 - 8M-A

58

424,00 480,00 512,00 520,00 560,00 576,00 600,00 608,00 640,00 656,00 720,00 760,00 776,00 784,00 800,00 840,00 880,00 920,00 960,00 976,00 1000,00 1040,00 1080,00 1120,00 1128,00 1160,00 1200,00 1224,00 1256,00 1280,00 1304,00 1328,00 1360,00 1400,00 1424,00 1440,00 1520,00 1552,00 1600,00 1696,00 1760,00 1800,00 1904,00 2000,00 2080,00 2104,00 2240,00 2248,00 2272,00 2400,00 2600,00 2800,00

£/each

30 mm width Code No. 30 Euro/each

£/each

50 mm width Code No. 50 Euro/each

£/each

85 mm width Code No. 85 Euro/each

£/each

53 60 64 65 70 72 75 76 80 82 90 95 97 98 100 105 110 115 120 122 125 130 135 140 141 145 150 153 157 160 163 166 170 175 178 180 190 194 200 212 220 225 238 250 260 263 280 281 284 300 325 350

Further sizes on request.

optibelt

OMEGA Timing Belts

5,6

9,5

14,0 Type 14M-A (nominal dimensions mm)

Type 14M-A - pitch 14 mm Belt No.

Pitch length Number (mm) of teeth

40 mm width Code No. 40 Euro/ each

966 - 14M-A 1092 - 14M-A 1190 - 14M-A 1400 - 14M-A 1610 - 14M-A 1778 - 14M-A 1890 - 14M-A 2100 - 14M-A 2310 - 14M-A 2450 - 14M-A 2590 - 14M-A 2800 - 14M-A

966,00 1092,00 1190,00 1400,00 1610,00 1778,00 1890,00 2100,00 2310,00 2450,00 2590,00 2800,00

Further sizes on request.

£/ each

55 mm width Code No. 55 Euro/ each

£/ each

85 mm width Code No. 85 Euro/ each

£/ each

115 mm width Code No. 115 Euro/ each

£/ each

170 mm width Code No. 170 Euro/ each

£/ each

69 78 85 100 115 127 135 150 165 175 185 200

59

optibelt

OMEGA Timing Belts

0,7

1,3

2,0 Type 2M-B (nominal dimensions mm)

Type 2M-B - pitch 2 mm Belt No.

Pitch length (mm)

Number of teeth

3 mm width Code No. 3 Euro/each

90 - 2M-B• 100 - 2M-B• 112 - 2M-B• 120 - 2M-B• 130 - 2M-B• 180 - 2M-B• 184 - 2M-B• 250 - 2M-B• 266 - 2M-B• 274 - 2M-B• 280 - 2M-B• 308 - 2M-B• 310 - 2M-B• 328 - 2M-B• 330 - 2M-B• 340 - 2M-B• 426 - 2M-B• 448 - 2M-B• 558 - 2M-B• 560 - 2M-B• 710 - 2M-B• 984 - 2M-B• 1066 - 2M-B• 1224 - 2M-B•

60

90,00 100,00 112,00 120,00 130,00 180,00 184,00 250,00 266,00 274,00 280,00 308,00 310,00 328,00 330,00 340,00 426,00 448,00 558,00 560,00 710,00 984,00 1066,00 1224,00

£/each

6 mm width Code No. 6 Euro/each

£/each

9 mm width Code No. 9 Euro/each

£/each

45 50 56 60 65 90 92 125 133 137 140 154 155 164 165 170 213 224 279 280 355 492 533 612

Further sizes on request.

• Non stock items, Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

optibelt

OMEGA Timing Belts

1,1

2,3

3,0 Type 3M-B (nominal dimensions mm)

Type 3M-B - pitch 3 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

111 - 3M-B• 129 - 3M-B• 141 - 3M-B• 144 - 3M-B• 150 - 3M-B• 165 - 3M-B• 168 - 3M-B• 174 - 3M-B• 177 - 3M-B• 180 - 3M-B• 186 - 3M-B• 192 - 3M-B• 195 - 3M-B• 201 - 3M-B• 204 - 3M-B• 207 - 3M-B• 210 - 3M-B• 213 - 3M-B• 225 - 3M-B• 252 - 3M-B• 255 - 3M-B• 267 - 3M-B• 285 - 3M-B• 291 - 3M-B• 300 - 3M-B• 312 - 3M-B• 318 - 3M-B• 330 - 3M-B• 339 - 3M-B• 345 - 3M-B• 357 - 3M-B• 363 - 3M-B• 366 - 3M-B• 384 - 3M-B• 390 - 3M-B• 420 - 3M-B• 447 - 3M-B• 474 - 3M-B• 480 - 3M-B• 486 - 3M-B• 495 - 3M-B• 501 - 3M-B• 513 - 3M-B• 519 - 3M-B• 522 - 3M-B• 525 - 3M-B• 531 - 3M-B• 537 - 3M-B• 558 - 3M-B• 564 - 3M-B• 570 - 3M-B• 597 - 3M-B• 600 - 3M-B• 606 - 3M-B• 615 - 3M-B•

Further sizes on request.

111,00 129,00 141,00 144,00 150,00 165,00 168,00 174,00 177,00 180,00 186,00 192,00 195,00 201,00 204,00 207,00 210,00 213,00 225,00 252,00 255,00 267,00 285,00 291,00 300,00 312,00 318,00 330,00 339,00 345,00 357,00 363,00 366,00 384,00 390,00 420,00 447,00 474,00 480,00 486,00 495,00 501,00 513,00 519,00 522,00 525,00 531,00 537,00 558,00 564,00 570,00 597,00 600,00 606,00 615,00

£/each

9 mm width Code No. 9 Euro/each

£/each

15 mm width Code No. 15 Euro/each

£/each

37 43 47 48 50 55 56 58 59 60 62 64 65 67 68 69 70 71 75 84 85 89 95 97 100 104 106 110 113 115 119 121 122 128 130 140 149 158 160 162 165 167 171 173 174 175 177 179 186 188 190 199 200 202 205

• Non stock items, Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

61

optibelt

OMEGA Timing Belts

1,1

2,3

3,0 Type 3M-B (nominal dimensions mm)

Type 3M-B - pitch 3 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

633 - 3M-B• 669 - 3M-B• 675 - 3M-B• 711 - 3M-B• 738 - 3M-B• 804 - 3M-B• 843 - 3M-B• 882 - 3M-B• 888 - 3M-B• 1062 - 3M-B• 1569 - 3M-B•

62

633,00 669,00 675,00 711,00 738,00 804,00 843,00 882,00 888,00 1062,00 1569,00

£/each

9 mm width Code No. 9 Euro/each

£/each

15 mm width Code No. 15 Euro/each

£/each

211 223 225 237 246 268 281 294 296 354 523

Further sizes on request.

• Non stock items, Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

optibelt

OMEGA Timing Belts

1,9

3,4

5,0 Type 5M-B (nominal dimensions mm)

Type 5M-B - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

9 mm width Code No. 9 Euro/each

180 - 5M-B• 225 - 5M-B 255 - 5M-B• 265 - 5M-B• 270 - 5M-B• 280 - 5M-B• 295 - 5M-B• 305 - 5M-B• 325 - 5M-B 330 - 5M-B• 340 - 5M-B• 350 - 5M-B 360 - 5M-B• 365 - 5M-B• 370 - 5M-B• 375 - 5M-B 385 - 5M-B• 400 - 5M-B 415 - 5M-B• 425 - 5M-B 450 - 5M-B 475 - 5M-B 500 - 5M-B 520 - 5M-B• 525 - 5M-B 550 - 5M-B 565 - 5M-B• 575 - 5M-B• 580 - 5M-B• 600 - 5M-B 610 - 5M-B• 615 - 5M-B• 630 - 5M-B• 635 - 5M-B• 640 - 5M-B• 645 - 5M-B• 665 - 5M-B• 670 - 5M-B• 700 - 5M-B 710 - 5M-B• 740 - 5M-B• 750 - 5M-B• 755 - 5M-B• 800 - 5M-B 825 - 5M-B• 835 - 5M-B• 850 - 5M-B 860 - 5M-B• 890 - 5M-B• 900 - 5M-B 925 - 5M-B• 935 - 5M-B• 950 - 5M-B 965 - 5M-B• 980 - 5M-B•

Further sizes on request.

180,00 225,00 255,00 265,00 270,00 280,00 295,00 305,00 325,00 330,00 340,00 350,00 360,00 365,00 370,00 375,00 385,00 400,00 415,00 425,00 450,00 475,00 500,00 520,00 525,00 550,00 565,00 575,00 580,00 600,00 610,00 615,00 630,00 635,00 640,00 645,00 665,00 670,00 700,00 710,00 740,00 750,00 755,00 800,00 825,00 835,00 850,00 860,00 890,00 900,00 925,00 935,00 950,00 965,00 980,00

£/each

15 mm width Code No. 15 Euro/each

£/each

25 mm width Code No. 25 Euro/each

£/each

36 45 51 53 54 56 59 61 65 66 68 70 72 73 74 75 77 80 83 85 90 95 100 104 105 110 113 115 116 120 122 123 126 127 128 129 133 134 140 142 148 150 151 160 165 167 170 172 178 180 185 187 190 193 196

• Non stock items, Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

63

optibelt

OMEGA Timing Belts

1,9

3,4

5,0 Type 5M-B (nominal dimensions mm)

Type 5M-B - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

9 mm width Code No. 9 Euro/each

1000 - 5M-B 1035 - 5M-B• 1050 - 5M-B 1100 - 5M-B• 1135 - 5M-B• 1200 - 5M-B• 1500 - 5M-B• 1595 - 5M-B• 1870 - 5M-B• 2000 - 5M-B• 2525 - 5M-B•

64

1000,00 1035,00 1050,00 1100,00 1135,00 1200,00 1500,00 1595,00 1870,00 2000,00 2525,00

£/each

15 mm width Code No. 15 Euro/each

£/each

25 mm width Code No. 25 Euro/each

£/each

200 207 210 220 227 240 300 319 374 400 505

Further sizes on request.

• Non stock items, Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

optibelt

OMEGA Timing Belts

3,2

5,4

8,0 Type 8M-B (nominal dimensions mm)

Type 8M-B - pitch 8 mm Belt No.

Pitch length (mm)

Number of teeth

20 mm width Code No. 20 Euro/each

424 - 8M-B 480 - 8M-B 512 - 8M-B 520 - 8M-B 560 - 8M-B 576 - 8M-B 600 - 8M-B 608 - 8M-B 640 - 8M-B 656 - 8M-B 720 - 8M-B 760 - 8M-B 776 - 8M-B 784 - 8M-B 800 - 8M-B 840 - 8M-B 880 - 8M-B 920 - 8M-B 960 - 8M-B 976 - 8M-B 1000 - 8M-B 1040 - 8M-B 1080 - 8M-B 1120 - 8M-B 1128 - 8M-B 1160 - 8M-B 1200 - 8M-B 1224 - 8M-B 1256 - 8M-B 1280 - 8M-B 1304 - 8M-B 1328 - 8M-B 1360 - 8M-B 1400 - 8M-B 1424 - 8M-B 1440 - 8M-B 1520 - 8M-B 1552 - 8M-B 1600 - 8M-B 1696 - 8M-B 1760 - 8M-B 1800 - 8M-B 1904 - 8M-B 2000 - 8M-B 2080 - 8M-B 2104 - 8M-B 2240 - 8M-B 2248 - 8M-B 2272 - 8M-B 2400 - 8M-B 2600 - 8M-B 2800 - 8M-B

424,00 480,00 512,00 520,00 560,00 576,00 600,00 608,00 640,00 656,00 720,00 760,00 776,00 784,00 800,00 840,00 880,00 920,00 960,00 976,00 1000,00 1040,00 1080,00 1120,00 1128,00 1160,00 1200,00 1224,00 1256,00 1280,00 1304,00 1328,00 1360,00 1400,00 1424,00 1440,00 1520,00 1552,00 1600,00 1696,00 1760,00 1800,00 1904,00 2000,00 2080,00 2104,00 2240,00 2248,00 2272,00 2400,00 2600,00 2800,00

Further sizes on request.

£/each

30 mm width Code No. 30 Euro/each

£/each

50 mm width Code No. 50 Euro/each

£/each

85 mm width Code No. 85 Euro/each

£/each

53 60 64 65 70 72 75 76 80 82 90 95 97 98 100 105 110 115 120 122 125 130 135 140 141 145 150 153 157 160 163 166 170 175 178 180 190 194 200 212 220 225 238 250 260 263 280 281 284 300 325 350

65

optibelt

OMEGA Timing Belts

5,6

9,5

14,0 Type 14M-B (nominal dimensions mm)

Type 14M-B - pitch 14 mm Belt No.

Pitch length Number (mm) of teeth

40 mm width Code No. 40 Euro/ each

966 - 14M-B 1092 - 14M-B 1190 - 14M-B 1400 - 14M-B 1610 - 14M-B 1778 - 14M-B 1890 - 14M-B 2100 - 14M-B 2310 - 14M-B 2450 - 14M-B 2590 - 14M-B 2800 - 14M-B

66

966,00 1092,00 1190,00 1400,00 1610,00 1778,00 1890,00 2100,00 2310,00 2450,00 2590,00 2800,00

£/ each

55 mm width Code No. 55 Euro/ each

£/ each

85 mm width Code No. 85 Euro/ each

£/ each

115 mm width Code No. 115 Euro/ each

£/ each

170 mm width Code No. 170 Euro/ each

£/ each

69 78 85 100 115 127 135 150 165 175 185 200

Further sizes on request.

optibelt-HTD® Timing Belts

Type 3M

(nominal dimensions – mm)

Type 3M - pitch 3 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

111 - 3M 117 - 3M 120 - 3M 123 - 3M• 126 - 3M• 129 - 3M 141 - 3M• 144 - 3M 150 - 3M 156 - 3M• 159 - 3M 165 - 3M• 168 - 3M 174 - 3M• 177 - 3M 180 - 3M 183 - 3M• 186 - 3M• 192 - 3M• 195 - 3M 201 - 3M 204 - 3M 210 - 3M 213 - 3M 216 - 3M 225 - 3M 237 - 3M• 240 - 3M 243 - 3M 246 - 3M 249 - 3M• 252 - 3M 255 - 3M 267 - 3M 276 - 3M• 282 - 3M• 285 - 3M 288 - 3M 291 - 3M• 294 - 3M• 300 - 3M 306 - 3M• 312 - 3M 318 - 3M 330 - 3M 333 - 3M 336 - 3M 339 - 3M 345 - 3M 357 - 3M• 363 - 3M 384 - 3M 390 - 3M 420 - 3M 447 - 3M

Further sizes on request.

111,00 117,00 120,00 123,00 126,00 129,00 141,00 144,00 150,00 156,00 159,00 165,00 168,00 174,00 177,00 180,00 183,00 186,00 192,00 195,00 201,00 204,00 210,00 213,00 216,00 225,00 237,00 240,00 243,00 246,00 249,00 252,00 255,00 267,00 276,00 282,00 285,00 288,00 291,00 294,00 300,00 306,00 312,00 318,00 330,00 333,00 336,00 339,00 345,00 357,00 363,00 384,00 390,00 420,00 447,00

£/each

9 mm width Code No. 9 Euro/each

£/each

15 mm width Code No. 15 Euro/each

£/each

37 39 40 41 42 43 47 48 50 52 53 55 56 58 59 60 61 62 64 65 67 68 70 71 72 75 79 80 81 82 83 84 85 89 92 94 95 96 97 98 100 102 104 106 110 111 112 113 115 119 121 128 130 140 149

• Non stock items. Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

67

optibelt-HTD® Timing Belts

Type 3M

(nominal dimensions – mm)

Type 3M - pitch 3 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

462 - 3M 474 - 3M 477 - 3M• 480 - 3M 486 - 3M 489 - 3M 495 - 3M 501 - 3M 513 - 3M 522 - 3M 525 - 3M 531 - 3M 537 - 3M 558 - 3M• 564 - 3M 570 - 3M 582 - 3M 591 - 3M• 594 - 3M• 597 - 3M 606 - 3M 612 - 3M• 633 - 3M 648 - 3M• 669 - 3M 672 - 3M• 708 - 3M 711 - 3M 753 - 3M 804 - 3M 843 - 3M 882 - 3M 945 - 3M 960 - 3M 1041 - 3M 1068 - 3M 1071 - 3M 1125 - 3M 1176 - 3M 1245 - 3M 1263 - 3M 1500 - 3M 1530 - 3M 1569 - 3M 1863 - 3M

68

462,00 474,00 477,00 480,00 486,00 489,00 495,00 501,00 513,00 522,00 525,00 531,00 537,00 558,00 564,00 570,00 582,00 591,00 594,00 597,00 606,00 612,00 633,00 648,00 669,00 672,00 708,00 711,00 753,00 804,00 843,00 882,00 945,00 960,00 1041,00 1068,00 1071,00 1125,00 1176,00 1245,00 1263,00 1500,00 1530,00 1569,00 1863,00

£/each

9 mm width Code No. 9 Euro/each

£/each

15 mm width Code No. 15 Euro/each

£/each

154 158 159 160 162 163 165 167 171 174 175 177 179 186 188 190 194 197 198 199 202 204 211 216 223 224 236 237 251 268 281 294 315 320 347 356 357 375 392 415 421 500 510 523 621

Further sizes on request.

• Non stock items. Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 470 mm.

optibelt-HTD® Timing Belts

Type 5M

(nominal dimensions – mm)

Type 5M - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

9 mm width Code No. 9 Euro/each

120 - 5M 180 - 5M 225 - 5M 255 - 5M 265 - 5M 270 - 5M 280 - 5M 295 - 5M 300 - 5M 305 - 5M 325 - 5M 330 - 5M 340 - 5M 345 - 5M 350 - 5M 360 - 5M 365 - 5M 370 - 5M 375 - 5M 385 - 5M 400 - 5M 425 - 5M 450 - 5M 460 - 5M 475 - 5M 500 - 5M 520 - 5M 525 - 5M 535 - 5M 550 - 5M 565 - 5M 575 - 5M 580 - 5M 600 - 5M 610 - 5M 615 - 5M 620 - 5M 630 - 5M 635 - 5M 640 - 5M 645 - 5M 665 - 5M 670 - 5M 700 - 5M 710 - 5M 740 - 5M 750 - 5M 755 - 5M 800 - 5M 825 - 5M 835 - 5M 860 - 5M 890 - 5M 900 - 5M 925 - 5M

Further sizes on request.

120,00 180,00 225,00 255,00 265,00 270,00 280,00 295,00 300,00 305,00 325,00 330,00 340,00 345,00 350,00 360,00 365,00 370,00 375,00 385,00 400,00 425,00 450,00 460,00 475,00 500,00 520,00 525,00 535,00 550,00 565,00 575,00 580,00 600,00 610,00 615,00 620,00 630,00 635,00 640,00 645,00 665,00 670,00 700,00 710,00 740,00 750,00 755,00 800,00 825,00 835,00 860,00 890,00 900,00 925,00

£/each

15 mm width Code No. 15 Euro/each

£/each

25 mm width Code No. 25 Euro/each

£/each

24 36 45 51 53 54 56 59 60 61 65 66 68 69 70 72 73 74 75 77 80 85 90 92 95 100 104 105 107 110 113 115 116 120 122 123 124 126 127 128 129 133 134 140 142 148 150 151 160 165 167 172 178 180 185

69

optibelt-HTD® Timing Belts

Type 5M

(nominal dimensions – mm)

Type 5M - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

9 mm width Code No. 9 Euro/each

935 - 5M 940 - 5M 950 - 5M 965 - 5M 980 - 5M 1000 - 5M 1035 - 5M 1050 - 5M 1100 - 5M 1125 - 5M 1135 - 5M 1200 - 5M 1270 - 5M 1420 - 5M 1500 - 5M 1790 - 5M 1800 - 5M 1870 - 5M 1895 - 5M

70

935,00 940,00 950,00 965,00 980,00 1000,00 1035,00 1050,00 1100,00 1125,00 1135,00 1200,00 1270,00 1420,00 1500,00 1790,00 1800,00 1870,00 1895,00

£/each

15 mm width Code No. 15 Euro/each

£/each

25 mm width Code No. 25 Euro/each

£/each

187 188 190 193 196 200 207 210 220 225 227 240 254 284 300 358 360 374 379

Further sizes on request.

optibelt-HTD® Timing Belts

Type 8M

(nominal dimensions – mm)

Type 8M - pitch 8 mm Belt No.

Pitch length (mm)

Number of teeth

20 mm width Code No. 20 Euro/each

320 - 8M 376 - 8M 424 - 8M 480 - 8M 512 - 8M 560 - 8M 576 - 8M 600 - 8M 608 - 8M 624 - 8M 640 - 8M 656 - 8M 720 - 8M 760 - 8M 776 - 8M 784 - 8M 800 - 8M 880 - 8M 912 - 8M 920 - 8M 960 - 8M 976 - 8M 1000 - 8M 1040 - 8M 1064 - 8M 1080 - 8M 1120 - 8M 1128 - 8M 1160 - 8M 1200 - 8M 1216 - 8M 1224 - 8M 1256 - 8M 1264 - 8M 1280 - 8M 1304 - 8M 1328 - 8M 1360 - 8M 1424 - 8M 1432 - 8M 1440 - 8M 1520 - 8M 1600 - 8M 1696 - 8M 1760 - 8M 1800 - 8M 2000 - 8M 2080 - 8M 2240 - 8M 2248 - 8M 2272 - 8M 2400 - 8M 2600 - 8M 2800 - 8M

320,00 376,00 424,00 480,00 512,00 560,00 576,00 600,00 608,00 624,00 640,00 656,00 720,00 760,00 776,00 784,00 800,00 880,00 912,00 920,00 960,00 976,00 1000,00 1040,00 1064,00 1080,00 1120,00 1128,00 1160,00 1200,00 1216,00 1224,00 1256,00 1264,00 1280,00 1304,00 1328,00 1360,00 1424,00 1432,00 1440,00 1520,00 1600,00 1696,00 1760,00 1800,00 2000,00 2080,00 2240,00 2248,00 2272,00 2400,00 2600,00 2800,00

Further sizes on request.

£/each

30 mm width Code No. 30 Euro/each

£/each

50 mm width Code No. 50 Euro/each

£/each

85 mm width Code No. 85 Euro/each

£/each

40 47 53 60 64 70 72 75 76 78 80 82 90 95 97 98 100 110 114 115 120 122 125 130 133 135 140 141 145 150 152 153 157 158 160 163 166 170 178 179 180 190 200 212 220 225 250 260 280 281 284 300 325 350

71

optibelt-HTD® Timing Belts

Type 14M

Type 20M

(nominal dimensions – mm)

Type 14M - pitch 14 mm Belt No.

924 - 14M 966 - 14M 1092 - 14M 1190 - 14M 1400 - 14M 1610 - 14M 1778 - 14M 1890 - 14M 2100 - 14M 2310 - 14M 2450 - 14M 2590 - 14M 2800 - 14M 3150 - 14M 3500 - 14M 3850 - 14M 4004 - 14M 4326 - 14M 4578 - 14M

Pitch length (mm)

Number of teeth

924,00 966,00 1092,00 1190,00 1400,00 1610,00 1778,00 1890,00 2100,00 2310,00 2450,00 2590,00 2800,00 3150,00 3500,00 3850,00 4004,00 4326,00 4578,00

66 69 78 85 100 115 127 135 150 165 175 185 200 225 250 275 286 309 327

40 mm width Code No. 40 Euro/ each

£/ each

Type 20M - pitch 20 mm Belt No.

2000 - 20M 2500 - 20M 3400 - 20M 3800 - 20M 4200 - 20M 4600 - 20M 5000 - 20M 5200 - 20M 5400 - 20M 5600 - 20M 5800 - 20M 6000 - 20M 6200 - 20M 6400 - 20M 6600 - 20M

72

Pitch length (mm)

Number of teeth

2000,00 2500,00 3400,00 3800,00 4200,00 4600,00 5000,00 5200,00 5400,00 5600,00 5800,00 6000,00 6200,00 6400,00 6600,00

100 125 170 190 210 230 250 260 270 280 290 300 310 320 330

55 mm width Code No. 55 Euro/ each

£/ each

85 mm width Code No. 85 Euro/ each

£/ each

115 mm width Code No. 115 Euro/ each

£/ each

170 mm width Code No. 170 Euro/ each

£/ each

(Non stock items) 115 mm width Code No. 115 Euro/ each

£/ each

170 mm width Code No. 170 Euro/ each

£/ each

230 mm width Code No. 230 Euro/ each

£/ each

290 mm width Code No. 290 Euro/ each

£/ each

340 mm width Code No. 340 Euro/ each

£/ each

Further sizes on request..

optibelt-HTD® D Double Timing Belts

Type

D-5M

D-8M

D-14M

W

1,143

1,372

2,794

T

5,258

8,280

14,834

(nominal dimensions – mm)

Type D-5M - pitch 5 mm Belt No.

425 D-5M∗ 475 D-5M∗ 500 D-5M∗ 600 D-5M∗ 615 D-5M∗ 640 D-5M∗ 670 D-5M∗ 700 D-5M∗ 755 D-5M∗ 800 D-5M∗ 835 D-5M∗ 890 D-5M∗ 935 D-5M∗ 1100 D-5M∗ 1200 D-5M∗

Pitch length (mm)

Number of teeth

425,00 475,00 500,00 600,00 615,00 640,00 670,00 700,00 755,00 800,00 835,00 890,00 935,00 1100,00 1200,00

85 95 100 120 123 128 134 140 151 160 167 178 187 220 240

Type D-8M - pitch 8 mm Belt No.

480 D-8M∗ 560 D-8M∗ 600 D-8M∗ 640 D-8M∗ 720 D-8M∗ 800 D-8M∗ 880 D-8M∗ 960 D-8M∗ 1040 D-8M∗ 1120 D-8M∗ 1200 D-8M∗ 1280 D-8M∗ 1360 D-8M∗ 1440 D-8M∗ 1600 D-8M∗ 1760 D-8M∗ 1800 D-8M∗ 2000 D-8M∗ 2400 D-8M∗ 2600 D-8M∗ 2800 D-8M∗ 3600 D-8M∗

Pitch length (mm)

480,00 560,00 600,00 640,00 720,00 800,00 880,00 960,00 1040,00 1120,00 1200,00 1280,00 1360,00 1440,00 1600,00 1760,00 1800,00 2000,00 2400,00 2600,00 2800,00 3600,00

Number of teeth

60 70 75 80 90 100 110 120 130 140 150 160 170 180 200 220 225 250 300 325 350 450

D

∗ Prices, deliveries, minimum quanties and further sizes on request.

Type D-14M - pitch 14 mm Belt No.

Pitch length (mm)

Number of teeth

1610 D-14M∗ 1778 D-14M∗ 1890 D-14M∗ 2100 D-14M∗ 2310 D-14M∗ 2450 D-14M∗ 2590 D-14M∗ 2800 D-14M∗ 3150 D-14M∗ 3500 D-14M∗ 3850 D-14M∗ 4326 D-14M∗ 4578 D-14M∗

1610,00 1778,00 1890,00 2100,00 2310,00 2450,00 2590,00 2800,00 3150,00 3500,00 3850,00 4326,00 4578,00

115 127 135 150 165 175 185 200 225 250 275 309 327

73

optibelt-STD Timing Belts

Type S 3M

(nominal dimensions – mm)

Type S 3M - pitch 3 mm Belt No.

S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M S 3M -

74

120∗ 150∗ 177∗ 201∗ 225∗ 252∗ 264∗ 276∗ 300∗ 339∗ 384∗ 420∗ 459∗ 486∗ 501∗ 537∗ 564∗ 633∗

Type S 5M

Type S 5M - pitch 5 mm

Pitch length (mm)

Number of teeth

Belt No.

Pitch length (mm)

Number of teeth

120,00 150,00 177,00 201,00 225,00 252,00 264,00 276,00 300,00 339,00 384,00 420,00 459,00 486,00 501,00 537,00 564,00 633,00

40 50 59 67 75 84 88 92 100 113 128 140 153 162 167 179 188 211

S 5M - 255∗ S 5M - 295∗ S 5M - 325∗ S 5M - 350∗ S 5M - 375∗ S 5M - 400∗ S 5M - 425∗ S 5M - 475∗ S 5M - 500∗ S 5M - 525∗ S 5M - 560∗ S 5M - 575∗ S 5M - 600∗ S 5M - 625∗ S 5M - 650∗ S 5M - 675∗ S 5M - 700∗ S 5M - 750∗ S 5M - 800∗ S 5M - 850∗ S 5M - 900∗ S 5M - 950∗ S 5M - 1000∗ S 5M - 1050∗ S 5M - 1125∗ S 5M - 1270∗ S 5M - 1350∗ S 5M - 1420∗ S 5M - 1800∗ S 5M - 2000∗

255,00 295,00 325,00 350,00 375,00 400,00 425,00 475,00 500,00 525,00 560,00 575,00 600,00 625,00 650,00 675,00 700,00 750,00 800,00 850,00 900,00 950,00 1000,00 1050,00 1125,00 1270,00 1350,00 1420,00 1800,00 2000,00

51 59 65 70 75 80 85 95 100 105 112 115 120 125 130 135 140 150 160 170 180 190 200 210 225 254 270 284 360 400

∗ Prices, delivery times and further sizes on request.

optibelt-STD Timing Belts

Type S 8M

(nominal dimensions – mm)

Type S 8M - pitch 8 mm Belt No.

Pitch length (mm)

Number of teeth

20 mm width Code No. 200 Euro/each

S8M - 440 S8M - 480 S8M - 560 S8M - 600 S8M - 632 S8M - 640 S8M - 656 S8M - 688 S8M - 696 S8M - 712 S8M - 720 S8M - 728 S8M - 736 S8M - 760 S8M - 768 S8M - 784 S8M - 792 S8M - 800 S8M - 824 S8M - 848 S8M - 864 S8M - 880 S8M - 896 S8M - 912 S8M - 920 S8M - 944 S8M - 960 S8M - 992 S8M - 1000 S8M - 1024 S8M - 1032 S8M - 1040 S8M - 1056 S8M - 1064 S8M - 1072 S8M - 1120 S8M - 1136 S8M - 1152 S8M - 1160 S8M - 1168 S8M - 1176 S8M - 1184 S8M - 1192 S8M - 1200 S8M - 1208 S8M - 1216 S8M - 1240 S8M - 1248 S8M - 1256 S8M - 1264 S8M - 1280 S8M - 1304 S8M - 1312 S8M - 1344 S8M - 1352

440,00 480,00 560,00 600,00 632,00 640,00 656,00 688,00 696,00 712,00 720,00 728,00 736,00 760,00 768,00 784,00 792,00 800,00 824,00 848,00 864,00 880,00 896,00 912,00 920,00 944,00 960,00 992,00 1000,00 1024,00 1032,00 1040,00 1056,00 1064,00 1072,00 1120,00 1136,00 1152,00 1160,00 1168,00 1176,00 1184,00 1192,00 1200,00 1208,00 1216,00 1240,00 1248,00 1256,00 1264,00 1280,00 1304,00 1312,00 1344,00 1352,00

£/each

30 mm width Code No. 300 Euro/each

£/each

50 mm width Code No. 500 Euro/each

£/each

85 mm width Code No. 850 Euro/each

£/each

55 60 70 75 79 80 82 86 87 89 90 91 92 95 96 98 99 100 103 106 108 110 112 114 115 118 120 124 125 128 129 130 132 133 134 140 142 144 145 146 147 148 149 150 151 152 155 156 157 158 160 163 164 168 169

Prices, delivery times and further sizes on request.

75

optibelt-STD Timing Belts

(nominal dimensions – mm)

Type S 8M

Type S 14M

Type S 8M - pitch 8 mm Belt No.

Pitch length (mm)

20 mm width Code No. 200

Number of teeth

Euro/each

S8M - 1360 S8M - 1400 S8M - 1408 S8M - 1440 S8M - 1480 S8M - 1600 S8M - 1760 S8M - 1776 S8M - 1800 S8M - 1816 S8M - 1912 S8M - 2000 S8M - 2240 S8M - 2392 S8M - 2400 S8M - 2496 S8M - 2800 S8M - 3200

1360,00 1400,00 1408,00 1440,00 1480,00 1600,00 1760,00 1776,00 1800,00 1816,00 1912,00 2000,00 2240,00 2392,00 2400,00 2496,00 2800,00 3200,00

30 mm width Code No. 300

£/each

Euro/each

£/each

50 mm width Code No. 500 Euro/each

85 mm width Code No. 850

£/each

Euro/each

£/each

170 175 176 180 185 200 220 222 225 227 239 250 280 299 300 312 350 400

Type S 14M - pitch 14 mm Belt No.

Pitch length (mm)

Number of teeth

40 mm width Code No. 400 Euro/ each

S14M - 1400 S14M - 1540 S14M - 1610 S14M - 1890 S14M - 2002 S14M - 2100 S14M - 2240 S14M - 2310 S14M - 2450 S14M - 2590 S14M - 2800 S14M - 3150 S14M - 3500 S14M - 3850 S14M - 4004 S14M - 4508 S14M - 5012

76

1400,00 1540,00 1610,00 1890,00 2002,00 2100,00 2240,00 2310,00 2450,00 2590,00 2800,00 3150,00 3500,00 3850,00 4004,00 4508,00 5012,00

£/ each

55 mm width Code No. 550 Euro/ each

£/ each

85 mm width Code No. 850 Euro/ each

£/ each

115 mm width Code No. 1150 Euro/ each

£/ each

170 mm width Code No. 1700 Euro/ each

£/ each

100 110 115 135 143 150 160 165 175 185 200 225 250 275 286 322 358

Prices, delivery times and further sizes on request.

optibelt-ZR Open Ended Timing Belts made from Chloroprene

Glass fibre cord Type

Belt width (mm)

Length of roll (metre)

NE - XL 025• NE - XL 031• NE - XL 037 NE - XL 050• NE - L 037• NE - L 050 NE - L 075 NE - L 100 NE - H 050• NE - H 075 NE - H 100 NE - H 150• NE - H 200•

6,35 7,94 9,53 12,70 9,53 12,70 19,05 25,40 12,70 19,05 25,40 38,10 50,80

30 30 30 30 30 30 30 30 30 30 30 30 30

Steel wire cord Euro/roll

£/roll

Type

Euro/roll

£/roll

NE - XL 025 - St• NE - XL 031 - St• NE - XL 037 - St• NE - XL 050 - St• NE - L 037 - St• NE - L 050 - St• NE - L 075 - St• NE - L 100 - St• NE - H 050 - St• NE - H 075 - St• NE - H 100 - St• NE - H 150 - St• NE - H 200 - St•

optibelt-HTD® Open Ended Timing Belts made from Chloroprene

Glass fibre cord Type

NE - 3M 06• NE - 3M 09• NE - 3M 15• NE - 5M 06 NE - 5M 09 NE - 5M 15 NE - 5M 25 NE - 8M 10 NE - 8M 15 NE - 8M 20 NE - 8M 30 NE - 8M 50 NE - 8M 85 NE - 14M 25• NE - 14M 40 NE - 14M 55 NE - 14M 85

Belt width (mm)

6,0 9,0 15,0 6,0 9,0 15,0 25,0 10,0 15,0 20,0 30,0 50,0 85,0 25,0 40,0 55,0 85,0

Length of roll (metre)

Steel wire cord Euro/roll

£/roll

30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30

Further sizes and Open Ended Timing Belts with angular deflection on request.

Type

Euro/roll

£/roll

NE - 3M 06 - St• NE - 3M 09 - St• NE - 3M 15 - St• NE - 5M 06 - St NE - 5M 09 - St NE - 5M 15 - St NE - 5M 25 - St NE - 8M 10 - St NE - 8M 15 - St NE - 8M 20 - St NE - 8M 30 - St NE - 8M 50 - St NE - 8M 85 - St NE - 14M 25 - St• NE - 14M 40 - St NE - 14M 55 - St NE - 14M 85 - St • Non stock items.

Minimum order quantity: 1 roll.

77

optibelt-ZRM Polyurethane Timing Belts, metric T 2,5 10 T 2,5 / 120

Type

t (mm)

ht (mm)

hs (mm)

s (mm)

β

T 2,5

2,5

0,70

1,30

1,50

40°

Pitch length (mm) Pitch

(2,5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 2,5 - pitch 2,5 mm Belt No.

T2,5/120 T2,5/145 T2,5/160 T2,5/177,5 T2,5/200 T2,5/230 T2,5/245 T2,5/265 T2,5/285 T2,5/290 T2,5/305 T2,5/317,5 T2,5/330 T2,5/380 T2,5/420 T2,5/480 T2,5/500 T2,5/540 T2,5/600 T2,5/650 T2,5/780 T2,5/915 T2,5/950

Pitch length (mm)

Number of teeth

120,0 145,0 160,0 177,5 200,0 230,0 245,0 265,0 285,0 290,0 305,0 317,5 330,0 380,0 420,0 480,0 500,0 540,0 600,0 650,0 780,0 915,0 950,0

48 58 64 71 80 92 98 106 114 116 122 127 132 152 168 192 200 216 240 260 312 366 380

4 mm width Code No. 4 Euro/ each

£/ each

Price for intermediate widths Use the price for the next widest standard width. Example: 11 T 2,5/950 Use price for 12 T 2,5/950 = Euro 16,40 Further sizes on request.

78

6 mm width Code No. 6 Euro/ each

£/ each

8 mm width Code No. 8 Euro/ each

£/ each

10 mm width Code No. 10 Euro/ each

£/ each

12 mm width Code No. 12 Euro/ each

Price for over width belts Take the price for the widest standard belt and extrapolate. Example: 20 T 2,5/950 Price is price for 12 T 2,5/950 = Euro 16,40 Price for 20 T 2,5/950 = Euro 16,40 : 12 x 20 = Euro 27,33

£/ each

optibelt-ZRM Polyurethane Timing Belts, metric T5 10

T 5 / 165

Type T5

t (mm)

ht (mm)

hs (mm)

s (mm)

β

5,0

1,20

2,20

2,65

40°

Pitch length (mm) Pitch

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 5 - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

T5/165 T5/185 T5/200 T5/215 T5/220 T5/225 T5/245 T5/250 T5/255 T5/260 T5/270 T5/275 T5/280 T5/295 T5/300 T5/305 T5/325 T5/330 T5/340 T5/350 T5/355 T5/360• T5/365 T5/375 T5/390 T5/400 T5/410 T5/420 T5/425 T5/440 T5/445 T5/450 T5/455 T5/460 T5/475 T5/480 T5/500 T5/510 T5/525 T5/545 T5/550 T5/560 T5/575 T5/590 T5/600 T5/610 T5/620 T5/625 T5/630 T5/640 T5/650 T5/660 T5/675 T5/690 T5/700

Further sizes on request.

165,0 185,0 200,0 215,0 220,0 225,0 245,0 250,0 255,0 260,0 270,0 275,0 280,0 295,0 300,0 305,0 325,0 330,0 340,0 350,0 355,0 360,0 365,0 375,0 390,0 400,0 410,0 420,0 425,0 440,0 445,0 450,0 455,0 460,0 475,0 480,0 500,0 510,0 525,0 545,0 550,0 560,0 575,0 590,0 600,0 610,0 620,0 625,0 630,0 640,0 650,0 660,0 675,0 690,0 700,0

£/each

8 mm width Code No. 8 Euro/each

£/each

10 mm width Code No. 10 Euro/each

£/each

12 mm width Code No. 12 Euro/each

£/each

33 37 40 43 44 45 49 50 51 52 54 55 56 59 60 61 65 66 68 70 71 72 73 75 78 80 82 84 85 88 89 90 91 92 95 96 100 102 105 109 110 112 115 118 120 122 124 125 126 128 130 132 135 138 140

• Non stock items.

79

optibelt-ZRM Polyurethane Timing Belts, metric T5 10

T 5 / 165

Type T5

t (mm)

ht (mm)

hs (mm)

s (mm)

β

5,0

1,20

2,20

2,65

40°

Pitch length (mm) Pitch Width

(5 mm) (mm)

Construction: Polyurethane with steel tension cord

Type T 5 - pitch 5 mm

80

Belt No.

Pitch length (mm)

Number of teeth

T5/165 T5/185 T5/200 T5/215 T5/220 T5/225 T5/245 T5/250 T5/255 T5/260 T5/270 T5/275 T5/280 T5/295 T5/300 T5/305 T5/325 T5/330 T5/340 T5/350 T5/355 T5/360• T5/365 T5/375 T5/390 T5/400 T5/410 T5/420 T5/425 T5/440 T5/445 T5/450 T5/455 T5/460 T5/475 T5/480 T5/500 T5/510 T5/525 T5/545 T5/550 T5/560 T5/575 T5/590 T5/600 T5/610 T5/620 T5/625 T5/630 T5/640 T5/650 T5/660 T5/675 T5/690 T5/700

165,0 185,0 200,0 215,0 220,0 225,0 245,0 250,0 255,0 260,0 270,0 275,0 280,0 295,0 300,0 305,0 325,0 330,0 340,0 350,0 355,0 360,0 365,0 375,0 390,0 400,0 410,0 420,0 425,0 440,0 445,0 450,0 455,0 460,0 475,0 480,0 500,0 510,0 525,0 545,0 550,0 560,0 575,0 590,0 600,0 610,0 620,0 625,0 630,0 640,0 650,0 660,0 675,0 690,0 700,0

33 37 40 43 44 45 49 50 51 52 54 55 56 59 60 61 65 66 68 70 71 72 73 75 78 80 82 84 85 88 89 90 91 92 95 96 100 102 105 109 110 112 115 118 120 122 124 125 126 128 130 132 135 138 140

16 mm width Code No. 16

20 mm width Code No. 20

25 mm width Code No. 25

Further sizes on request.

• Non stock items.

optibelt-ZRM Polyurethane Timing Belts, metric T5 10

T 5 / 165

Type T5

t (mm)

ht (mm)

hs (mm)

s (mm)

β

5,0

1,20

2,20

2,65

40°

Pitch length (mm) Pitch

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 5 - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

T5/ 720 T5/ 725 T5/ 750 T5/ 780 T5/ 800• T5/ 815 T5/ 840 T5/ 850 T5/ 860• T5/ 900 T5/ 940 T5/ 990 T5/1000 T5/1075 T5/1100 T5/1115 T5/1140 T5/1215 T5/1350• T5/1380 T5/1440

720,0 725,0 750,0 780,0 800,0 815,0 840,0 850,0 860,0 900,0 940,0 990,0 1000,0 1075,0 1100,0 1115,0 1140,0 1215,0 1350,0 1380,0 1440,0

£/each

8 mm width Code No. 8 Euro/each

£/each

10 mm width Code No. 10 Euro/each

£/each

12 mm width Code No. 12 Euro/each

£/each

144 145 150 156 160 163 168 170 172 180 188 198 200 215 220 223 228 243 270 276 288

Price for intermediate widths Use the price for the next widest standard width Example: 11 T 5/1440 Use price for 12 T 5/1140 = Euro 23,00

Further sizes on request.

• Non stock items. 81

optibelt-ZRM Polyurethane Timing Belts, metric T5 10

T 5 / 165

Type T5

t (mm)

ht (mm)

hs (mm)

s (mm)

β

5,0

1,20

2,20

2,65

40°

Pitch length (mm) Pitch

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 5 - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

16 mm width Code No. 16 Euro/each

T5/ 720 T5/ 725 T5/ 750 T5/ 780 T5/ 800• T5/ 815 T5/ 840 T5/ 850 T5/ 860• T5/ 900 T5/ 940 T5/ 990 T5/1000 T5/1075 T5/1100 T5/1115 T5/1140 T5/1215 T5/1350• T5/1380 T5/1440

720,0 725,0 750,0 780,0 800,0 815,0 840,0 850,0 860,0 900,0 940,0 990,0 1000,0 1075,0 1100,0 1115,0 1140,0 1215,0 1350,0 1380,0 1440,0

20 mm width Code No. 20 £/each

144 145 150 156 160 163 168 170 172 180 188 198 200 215 220 223 228 243 270 276 288

Price for over width belts Take the price for the widest standard belt and extrapolate Example: 40 T 5/1440 Price is price for 25 T 5/1440 = Euro 39,30 Price for 40 T 5/1440 = Euro 39,30 : 25 x 40 = Euro 62,88 Further sizes on request.

82

• Non stock items.

Euro/each

25 mm width Code No. 25 £/each

Euro/each

£/each

optibelt-ZRM Polyurethane Timing Belts, metric T 10 10 T 10 / 260

Type

t (mm)

ht (mm)

hs (mm)

s (mm)

β

T 10

10,0

2,50

4,50

5,30

40°

Pitch length (mm) Pitch

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 10 - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

10 mm width Code No. 10 Euro/each

T10/ 260 T10/ 370 T10/ 400 T10/ 410 T10/ 440 T10/ 450 T10/ 500 T10/ 530 T10/ 550 T10/ 560 T10/ 600 T10/ 610 T10/ 630 T10/ 650 T10/ 660 T10/ 690 T10/ 700 T10/ 720 T10/ 750 T10/ 780 T10/ 800 T10/ 810 T10/ 840 T10/ 850 T10/ 880 T10/ 890 T10/ 900 T10/ 910 T10/ 920 T10/ 950 T10/ 960 T10/ 970 T10/ 980 T10/1000 T10/1010 T10/1050 T10/1080 T10/1100 T10/1110 T10/1140 T10/1150 T10/1200 T10/1210 T10/1240 T10/1250 T10/1300 T10/1320 T10/1350 T10/1390 T10/1400 T10/1420 T10/1440 T10/1450 T10/1460 T10/1500

260,0 370,0 400,0 410,0 440,0 450,0 500,0 530,0 550,0 560,0 600,0 610,0 630,0 650,0 660,0 690,0 700,0 720,0 750,0 780,0 800,0 810,0 840,0 850,0 880,0 890,0 900,0 910,0 920,0 950,0 960,0 970,0 980,0 1000,0 1010,0 1050,0 1080,0 1100,0 1110,0 1140,0 1150,0 1200,0 1210,0 1240,0 1250,0 1300,0 1320,0 1350,0 1390,0 1400,0 1420,0 1440,0 1450,0 1460,0 1500,0

Further sizes on request.

£/each

12 mm width Code No. 12 Euro/each

£/each

16 mm width Code No. 16 Euro/each

£/each

20 mm width Code No. 20 Euro/each

£/each

26 37 40 41 44 45 50 53 55 56 60 61 63 65 66 69 70 72 75 78 80 81 84 85 88 89 90 91 92 95 96 97 98 100 101 105 108 110 111 114 115 120 121 124 125 130 132 135 139 140 142 144 145 146 150

83

optibelt-ZRM Polyurethane Timing Belts, metric T 10 10 T 10 / 260

Type

t (mm)

ht (mm)

hs (mm)

s (mm)

β

T 10

10,0

2,50

4,50

5,30

40°

Pitch length (mm) Pitch

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 10 - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

25 mm width Code No. 25 Euro/each

T10/ 260 T10/ 370 T10/ 400 T10/ 410 T10/ 440 T10/ 450 T10/ 500 T10/ 530 T10/ 550 T10/ 560 T10/ 600 T10/ 610 T10/ 630 T10/ 650 T10/ 660 T10/ 690 T10/ 700 T10/ 720 T10/ 750 T10/ 780 T10/ 800 T10/ 810 T10/ 840 T10/ 850 T10/ 880 T10/ 890 T10/ 900 T10/ 910 T10/ 920 T10/ 950 T10/ 960 T10/ 970 T10/ 980 T10/1000 T10/1010 T10/1050 T10/1080 T10/1100 T10/1110 T10/1140 T10/1150 T10/1200 T10/1210 T10/1240 T10/1250 T10/1300 T10/1320 T10/1350 T10/1390 T10/1400 T10/1420 T10/1440 T10/1450 T10/1460 T10/1500

84

260,0 370,0 400,0 410,0 440,0 450,0 500,0 530,0 550,0 560,0 600,0 610,0 630,0 650,0 660,0 690,0 700,0 720,0 750,0 780,0 800,0 810,0 840,0 850,0 880,0 890,0 900,0 910,0 920,0 950,0 960,0 970,0 980,0 1000,0 1010,0 1050,0 1080,0 1100,0 1110,0 1140,0 1150,0 1200,0 1210,0 1240,0 1250,0 1300,0 1320,0 1350,0 1390,0 1400,0 1420,0 1440,0 1450,0 1460,0 1500,0

32 mm width Code No. 32 £/each

Euro/each

50 mm width Code No. 50 £/each

Euro/each

£/each

26 37 40 41 44 45 50 53 55 56 60 61 63 65 66 69 70 72 75 78 80 81 84 85 88 89 90 91 92 95 96 97 98 100 101 105 108 110 111 114 115 120 121 124 125 130 132 135 139 140 142 144 145 146 150

Further sizes on request.

optibelt-ZRM Polyurethane Timing Belts, metric T 10 10 T 10 / 260

Type

t (mm)

ht (mm)

hs (mm)

s (mm)

β

T 10

10,0

2,50

4,50

5,30

40°

Pitch length (mm) Pitch

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 10 - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

10 mm width Code No. 10 Euro/each

T10/1560 T10/1600 T10/1610 T10/1700 T10/1750 T10/1780 T10/1800 T10/1880 T10/1960 T10/2250

1560,0 1600,0 1610,0 1700,0 1750,0 1780,0 1800,0 1880,0 1960,0 2250,0

£/each

12 mm width Code No. 12 Euro/each

£/each

16 mm width Code No. 16 Euro/each

£/each

20 mm width Code No. 20 Euro/each

£/each

156 160 161 170 175 178 180 188 196 225

Price for intermediate widths Use the price for the next widest standard width. Example: 40 T 10/1010 Use price for 50 T 10/1010 = Euro 64,40

Further sizes on request.

85

optibelt-ZRM Polyurethane Timing Belts, metric T 10 10 T 10 / 260

Type

t (mm)

ht (mm)

hs (mm)

s (mm)

β

T 10

10,0

2,50

4,50

5,30

40°

Pitch length (mm) Pitch

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 10 - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

25 mm width Code No. 25 Euro/each

T10/1560 T10/1600 T10/1610 T10/1700 T10/1750 T10/1780 T10/1800 T10/1880 T10/1960 T10/2250

1560,0 1600,0 1610,0 1700,0 1750,0 1780,0 1800,0 1880,0 1960,0 2250,0

32 mm width Code No. 32 £/each

156 160 161 170 175 178 180 188 196 225

Price for over width belts Take the price for the widest standard belt and extrapolate. Example: 75 T 10/2250 Price is price for 50 T 10/2250 = Euro 137,00 Price for 75 T 10/2250 = Euro 137,00 : 50 x 75 = Euro 205,50 Further sizes on request.

86

Euro/each

50 mm width Code No. 50 £/each

Euro/each

£/each

optibelt-ZRM Polyurethane Timing Belts, metric AT 5 10 •

•

AT 5 / 300

Type

t (mm)

ht (mm)

hs (mm)

b (mm)

β

AT 5

5,0

1,20

2,70

2,50

50°

•

•

•

•

•

•

•

•

Pitch length (mm)

•

•

Pitch

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type AT 5 - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

AT5/ 225 AT5/ 255 AT5/ 280 AT5/ 300 AT5/ 340 AT5/ 375 AT5/ 390 AT5/ 420 AT5/ 450 AT5/ 455 AT5/ 500 AT5/ 545 AT5/ 600 AT5/ 610 AT5/ 660 AT5/ 710 AT5/ 720 AT5/ 750 AT5/ 780 AT5/ 825 AT5/ 860 AT5/ 975 AT5/1050 AT5/1125 AT5/1500

225,0 255,0 280,0 300,0 340,0 375,0 390,0 420,0 450,0 455,0 500,0 545,0 600,0 610,0 660,0 710,0 720,0 750,0 780,0 825,0 860,0 975,0 1050,0 1125,0 1500,0

Further sizes on request.

£/each

8 mm width Code No. 8 Euro/each

£/each

10 mm width Code No. 10 Euro/each

£/each

12 mm width Code No. 12 Euro/each

£/each

45 51 56 60 68 75 78 84 90 91 100 109 120 122 132 142 144 150 156 165 172 195 210 225 300

87

optibelt-ZRM Polyurethane Timing Belts, metric AT 5 10 •

•

AT 5 / 300

Type

t (mm)

ht (mm)

hs (mm)

b (mm)

β

AT 5

5,0

1,20

2,70

2,50

50°

•

•

•

•

•

•

•

•

Pitch length (mm)

•

•

Pitch

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type AT 5 - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

16 mm width Code No. 16 Euro/each

AT5/ 225 AT5/ 255 AT5/ 280 AT5/ 300 AT5/ 340 AT5/ 375 AT5/ 390 AT5/ 420 AT5/ 450 AT5/ 455 AT5/ 500 AT5/ 545 AT5/ 600 AT5/ 610 AT5/ 660 AT5/ 710 AT5/ 720 AT5/ 750 AT5/ 780 AT5/ 825 AT5/ 860 AT5/ 975 AT5/1050 AT5/1125 AT5/1500

88

225,0 255,0 280,0 300,0 340,0 375,0 390,0 420,0 450,0 455,0 500,0 545,0 600,0 610,0 660,0 710,0 720,0 750,0 780,0 825,0 860,0 975,0 1050,0 1125,0 1500,0

20 mm width Code No. 20 £/each

Euro/each

25 mm width Code No. 25 £/each

Euro/each

£/each

45 51 56 60 68 75 78 84 90 91 100 109 120 122 132 142 144 150 156 165 172 195 210 225 300

Further sizes on request.

optibelt-ZRM Polyurethane Timing Belts, metric AT 10 16 AT 10 / 700 •

•

Type

t (mm)

ht (mm)

hs (mm)

b (mm)

β

AT 10

10,0

2,50

5,00

5,00

50°

•

•

•

•

•

•

•

•

Pitch length (mm)

•

•

Pitch

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type AT 10 - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

10 mm width Code No. 10 Euro/each

AT10/ 500 AT10/ 560 AT10/ 600 AT10/ 610 AT10/ 660 AT10/ 700 AT10/ 730 AT10/ 780 AT10/ 800 AT10/ 840 AT10/ 890 AT10/ 920 AT10/ 960 AT10/ 980 AT10/1000 AT10/1010 AT10/1050 AT10/1080 AT10/1100 AT10/1150 AT10/1200 AT10/1210 AT10/1250 AT10/1280 AT10/1300 AT10/1320 AT10/1350 AT10/1360 AT10/1400 AT10/1420 AT10/1480 AT10/1500 AT10/1600 AT10/1700 AT10/1720 AT10/1800 AT10/1860 AT10/1940

500,0 560,0 600,0 610,0 660,0 700,0 730,0 780,0 800,0 840,0 890,0 920,0 960,0 980,0 1000,0 1010,0 1050,0 1080,0 1100,0 1150,0 1200,0 1210,0 1250,0 1280,0 1300,0 1320,0 1350,0 1360,0 1400,0 1420,0 1480,0 1500,0 1600,0 1700,0 1720,0 1800,0 1860,0 1940,0

Further sizes on request.

£/each

12 mm width Code No. 12 Euro/each

£/each

16 mm width Code No. 16 Euro/each

£/each

20 mm width Code No. 20 Euro/each

£/each

50 56 60 61 66 70 73 78 80 84 89 92 96 98 100 101 105 108 110 115 120 121 125 128 130 132 135 136 140 142 148 150 160 170 172 180 186 194

89

optibelt-ZRM Polyurethane Timing Belts, metric AT 10 16 AT 10 / 700 •

•

Type

t (mm)

ht (mm)

hs (mm)

b (mm)

β

AT 10

10,0

2,50

5,00

5,00

50°

•

•

•

•

•

•

•

•

Pitch length (mm)

•

•

Pitch Width

(10 mm) (mm)

Construction: Polyurethane with steel tension cord

Type AT 10 - pitch 10 mm

90

Belt No.

Pitch length (mm)

Number of teeth

AT10/ 500 AT10/ 560 AT10/ 600 AT10/ 610 AT10/ 660 AT10/ 700 AT10/ 730 AT10/ 780 AT10/ 800 AT10/ 840 AT10/ 890 AT10/ 920 AT10/ 960 AT10/ 980 AT10/1000 AT10/1010 AT10/1050 AT10/1080 AT10/1100 AT10/1150 AT10/1200 AT10/1210 AT10/1250 AT10/1280 AT10/1300 AT10/1320 AT10/1350 AT10/1360 AT10/1400 AT10/1420 AT10/1480 AT10/1500 AT10/1600 AT10/1700 AT10/1720 AT10/1800 AT10/1860 AT10/1940

500,0 560,0 600,0 610,0 660,0 700,0 730,0 780,0 800,0 840,0 890,0 920,0 960,0 980,0 1000,0 1010,0 1050,0 1080,0 1100,0 1150,0 1200,0 1210,0 1250,0 1280,0 1300,0 1320,0 1350,0 1360,0 1400,0 1420,0 1480,0 1500,0 1600,0 1700,0 1720,0 1800,0 1860,0 1940,0

50 56 60 61 66 70 73 78 80 84 89 92 96 98 100 101 105 108 110 115 120 121 125 128 130 132 135 136 140 142 148 150 160 170 172 180 186 194

25 mm width Code No. 25

32 mm width Code No. 32

50 mm width Code No. 50

Further sizes on request.

optibelt-ZRM D Double Polyurethane Timing Belts, metric T5D 25 T 5 / 300

D Double Timing Belts Pitch length (mm) Pitch

Type

t (mm)

ht (mm)

hs1 (mm)

s (mm)

β

T5D

5,0

1,20

3,40

2,65

40°

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 5 D - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

6 mm width Code No. 6 Euro/each

T5/ 300 D• T5/ 350 D• T5/ 400 D• T5/ 410 D T5/ 450 D• T5/ 460 D T5/ 480 D T5/ 500 D T5/ 515 D T5/ 550 D T5/ 590 D T5/ 600 D• T5/ 620 D T5/ 650 D T5/ 700 D T5/ 750 D T5/ 800 D T5/ 815 D T5/ 850 D• T5/ 860 D T5/ 900 D T5/ 940 D T5/1100 D

300,0 350,0 400,0 410,0 450,0 460,0 480,0 500,0 515,0 550,0 590,0 600,0 620,0 650,0 700,0 750,0 800,0 815,0 850,0 860,0 900,0 940,0 1100,0

60 70 80 82 90 92 96 100 103 110 118 120 124 130 140 150 160 163 170 172 180 188 220

£/each

8 mm width Code No. 8 Euro/each

£/each

10 mm width Code No. 10 Euro/each

£/each

12 mm width Code No. 12 Euro/each

£/each

D

Price for intermediate widths Use the price for the next widest standard width. Example: 11 T 5/1100 D Use price for 12 T 5/1100 D = Euro 23,30 Further sizes and special constructions on request.

• Non stock items. 91

optibelt-ZRM D Double Polyurethane Timing Belts, metric T5D 25 T 5 / 300

D Double Timing Belts Pitch length (mm) Pitch

Type

t (mm)

ht (mm)

hs1 (mm)

s (mm)

β

T5D

5,0

1,20

3,40

2,65

40°

(5 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 5 D - pitch 5 mm Belt No.

Pitch length (mm)

Number of teeth

16 mm width Code No. 16 Euro/each

T5/ 300 D• T5/ 350 D• T5/ 400 D• T5/ 410 D T5/ 450 D• T5/ 460 D T5/ 480 D T5/ 500 D T5/ 515 D T5/ 550 D T5/ 590 D T5/ 600 D• T5/ 620 D T5/ 650 D T5/ 700 D T5/ 750 D T5/ 800 D T5/ 815 D T5/ 850 D• T5/ 860 D T5/ 900 D T5/ 940 D T5/1100 D

300,0 350,0 400,0 410,0 450,0 460,0 480,0 500,0 515,0 550,0 590,0 600,0 620,0 650,0 700,0 750,0 800,0 815,0 850,0 860,0 900,0 940,0 1100,0

60 70 80 82 90 92 96 100 103 110 118 120 124 130 140 150 160 163 170 172 180 188 220

£/each

20 mm width Code No. 20 Euro/each

D

Price for over-width belts Take the price for the widest standard belt and extrapolate. Example: 50 T 5/1100 D Price is price for 32 T 5/1100 D = Euro 51,30 Price for 50 T 5/1100 D = Euro 51,30 : 32 x 50 = Euro 80,16 Further sizes and special constructions on request.

92

£/each

• Non stock items.

25 mm width Code No. 25 Euro/each

£/each

32 mm width Code No. 32 Euro/each

£/each

optibelt-ZRM D Double Polyurethane Timing Belts, metric T 10 D 25 T 10 / 260

D Double Timing Belts Pitch length (mm) Pitch

Type

t (mm)

ht (mm)

hs1 (mm)

s (mm)

β

T 10 D

10,0

2,50

7,00

5,30

40°

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 10 D - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

10 mm width Code No. 10 Euro/each

T10/ 260 D T10/ 530 D T10/ 600 D T10/ 630 D T10/ 660 D T10/ 700 D T10/ 720 D T10/ 750 D T10/ 800 D T10/ 840 D T10/ 900 D T10/ 980 D T10/1000 D• T10/1100 D T10/1200 D• T10/1210 D T10/1240 D T10/1250 D T10/1300 D• T10/1320 D T10/1350 D T10/1400 D T10/1420 D T10/1500 D T10/1600 D• T10/1610 D T10/1700 D T10/1800 D T10/1880 D

260,0 530,0 600,0 630,0 660,0 700,0 720,0 750,0 800,0 840,0 900,0 980,0 1000,0 1100,0 1200,0 1210,0 1240,0 1250,0 1300,0 1320,0 1350,0 1400,0 1420,0 1500,0 1600,0 1610,0 1700,0 1800,0 1880,0

26 53 60 63 66 70 72 75 80 84 90 98 100 110 120 121 124 125 130 132 135 140 142 150 160 161 170 180 188

£/each

12 mm width Code No. 12 Euro/each

£/each

16 mm width Code No. 16 Euro/each

£/each

20 mm width Code No. 20 Euro/each

£/each

D

Price for intermediate widths Use the price for the next widest standard width. Example: 18 T 10/1880 D Use price for 20 T 10/1880 D = Euro 69,70 Further sizes and special constructions on request.

• Non stock items. 93

optibelt-ZRM D Double Polyurethane Timing Belts, metric T 10 D 25 T 10 / 260

D Double Timing Belts Pitch length (mm) Pitch

Type

t (mm)

ht (mm)

hs1 (mm)

s (mm)

β

T 10 D

10,0

2,50

7,00

5,30

40°

(10 mm)

Width

(mm)

Construction: Polyurethane with steel tension cord

Type T 10 D - pitch 10 mm Belt No.

Pitch length (mm)

Number of teeth

25 mm width Code No. 25 Euro/each

T10/ 260 D T10/ 530 D T10/ 600 D T10/ 630 D T10/ 660 D T10/ 700 D T10/ 720 D T10/ 750 D T10/ 800 D T10/ 840 D T10/ 900 D T10/ 980 D T10/1000 D• T10/1100 D T10/1200 D• T10/1210 D T10/1240 D T10/1250 D T10/1300 D• T10/1320 D T10/1350 D T10/1400 D T10/1420 D T10/1500 D T10/1600 D• T10/1610 D T10/1700 D T10/1800 D T10/1880 D

260,0 530,0 600,0 630,0 660,0 700,0 720,0 750,0 800,0 840,0 900,0 980,0 1000,0 1100,0 1200,0 1210,0 1240,0 1250,0 1300,0 1320,0 1350,0 1400,0 1420,0 1500,0 1600,0 1610,0 1700,0 1800,0 1880,0

26 53 60 63 66 70 72 75 80 84 90 98 100 110 120 121 124 125 130 132 135 140 142 150 160 161 170 180 188

32 mm width Code No. 32 £/each

Euro/each

D

Price for over-width belts Take the price for the widest standard belt and extrapolate. Example: 80 T 10/1880 D Price is price for 50 T 10/1880 D = Euro 164,00 Price for 80 T 10/1880 D = Euro 164,00 : 50 x 80 = Euro 262,40 Further sizes and special constructions on request.

94

• Non stock items.

50 mm width Code No. 50 £/each

Euro/each

£/each

optibelt-ZRP Polyurethane Timing Belts, inch

Construction: Polyurethane with Aramid tension cord

Type MXL (nominal dimensions – mm)

Type MXL - pitch 2,032 mm (Non stock items) Belt No.

K 240 MXL K 280 MXL K 320 MXL K 360 MXL K 400 MXL K 440 MXL K 480 MXL K 520 MXL K 560 MXL K 600 MXL K 640 MXL K 680 MXL K 720 MXL K 760 MXL K 800 MXL K 840 MXL K 880 MXL K 920 MXL K 960 MXL K 1000 MXL K 1040 MXL K 1080 MXL K 1120 MXL K 1160 MXL K 1200 MXL K 1240 MXL K 1280 MXL K 1320 MXL K 1360 MXL K 1400 MXL K 1440 MXL K 1480 MXL K 1520 MXL K 1560 MXL K 1600 MXL K 1640 MXL K 1680 MXL K 1720 MXL K 1760 MXL K 1800 MXL K 1840 MXL K 1880 MXL K 1920 MXL K 1960 MXL K 2000 MXL K 2040 MXL K 2080 MXL K 2120 MXL K 2160 MXL K 2200 MXL K 2240 MXL K 2280 MXL K 2320 MXL K 2360 MXL K 2400 MXL

Pitch length

(inch)

(mm)

2,40 2,80 3,20 3,60 4,00 4,40 4,80 5,20 5,60 6,00 6,40 6,80 7,20 7,60 8,00 8,40 8,80 9,20 9,60 10,00 10,40 10,80 11,20 11,60 12,00 12,40 12,80 13,20 13,60 14,00 14,40 14,80 15,20 15,60 16,00 16,40 16,80 17,20 17,60 18,00 18,40 18,80 19,20 19,60 20,00 20,40 20,80 21,20 21,60 22,00 22,40 22,80 23,20 23,60 24,00

60,96 71,12 81,28 91,44 101,60 111,76 121,92 132,08 142,24 152,40 162,56 172,72 182,88 193,04 203,20 213,36 223,52 233,68 243,84 254,00 264,16 274,32 284,48 294,64 304,80 314,96 325,12 335,28 345,44 355,60 365,76 375,92 386,08 396,24 406,40 416,56 426,72 436,88 447,04 457,20 467,36 477,52 487,68 497,84 508,00 518,16 528,32 538,48 548,64 558,80 568,96 579,12 589,28 599,44 609,60

Number of teeth

1/8" width ≈ 3,175 mm Code No. 012 Euro/ each

£/ each

3/16" width ≈ 4,763 mm Code No. 019 Euro/ each

£/ each

1/4" width ≈ 6,35 mm Code No. 025 Euro/ each

£/ each

5/16" width ≈ 7,94 mm Code No. 031 Euro/ each

£/ each

30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 155 160 165 170 175 180 185 190 195 200 205 210 215 220 225 230 235 240 245 250 255 260 265 270 275 280 285 290 295 300

Further sizes on request. Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 183 mm.

95

optibelt-ZRP Polyurethane Timing Belts, inch

Construction: Polyurethane with Aramid tension cord

Type MXL

(nominal dimensions – mm)

Type MXL - pitch 2,032 mm (Non stock items) Belt No.

K 2480 MXL K 2560 MXL K 2640 MXL K 2720 MXL K 2800 MXL K 2880 MXL K 2960 MXL K 3040 MXL K 3120 MXL K 3200 MXL

96

Pitch length

(inch)

(mm)

24,80 25,60 26,40 27,20 28,00 28,80 29,60 30,40 31,20 32,00

629,92 650,24 670,56 690,88 711,20 731,52 751,84 772,16 792,48 812,80

Number of teeth

1/8" width ≈ 3,175 mm Code No. 012 Euro/ each

£/ each

3/16" width ≈ 4,763 mm Code No. 019 Euro/ each

£/ each

1/4" width ≈ 6,35 mm Code No. 025 Euro/ each

£/ each

5/16" width ≈ 7,94 mm Code No. 031 Euro/ each

£/ each

310 320 330 340 350 360 370 380 390 400

Further sizes on request.

Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 183 mm.

optibelt-ZRP Polyurethane Timing Belts, inch

Construction: Polyurethane with Steel tension cord

Type XL

(nominal dimensions – mm)

Type XL - pitch 5,08 mm Belt No.

K 60 XL• K 70 XL• K 76 XL• K 80 XL• K 84 XL• K 90 XL• K 94 XL• K 96 XL• K 100 XL K 102 XL• K 104 XL• K 106 XL• K 110 XL K 114 XL• K 116 XL• K 120 XL K 124 XL• K 126 XL• K 128 XL• K 130 XL K 136 XL• K 140 XL K 150 XL K 152 XL• K 154 XL• K 160 XL K 166 XL• K 170 XL K 180 XL K 186 XL• K 190 XL K 200 XL K 210 XL K 212 XL• K 220 XL K 230 XL K 240 XL K 250 XL K 254 XL• K 260 XL K 270 XL K 290 XL K 300 XL K 320 XL• K 330 XL K 360 XL• K 376 XL• K 384 XL• K 390 XL K 414 XL• K 460 XL• K 480 XL• K 512 XL• K 550 XL• K 564 XL• K 630 XL• K 670 XL• Further sizes on request.

Pitch length

(inch)

(mm)

6,00 7,00 7,60 8,00 8,40 9,00 9,40 9,60 10,00 10,20 10,40 10,60 11,00 11,40 11,60 12,00 12,40 12,60 12,80 13,00 13,60 14,00 15,00 15,20 15,40 16,00 16,60 17,00 18,00 18,60 19,00 20,00 21,00 21,20 22,00 23,00 24,00 25,00 25,40 26,00 27,00 29,00 30,00 32,00 33,00 36,00 37,60 38,40 39,00 41,40 46,00 48,00 51,20 55,00 56,40 63,00 67,00

152,40 177,80 193,04 203,20 213,36 228,60 238,76 243,84 254,00 259,08 264,16 269,24 279,40 289,56 294,64 304,80 314,96 320,04 325,12 330,20 345,44 355,60 381,00 386,08 391,16 406,40 421,64 431,80 457,20 472,44 482,60 508,00 533,40 538,48 558,80 584,20 609,60 635,00 645,16 660,40 685,80 736,60 762,00 812,80 838,20 914,40 955,04 975,36 990,60 1051,56 1168,40 1219,20 1300,48 1397,00 1432,56 1600,20 1701,80

Number of teeth

1/4" width ≈ 6,35 mm Code No. 025 Euro/ each

£/ each

5/16" width ≈ 7,94 mm Code No. 031 Euro/ each

£/ each

3/8" width ≈ 9,53 mm Code No. 037 Euro/ each

£/ each

1/2" width ≈ 12,7 mm Code No. 050 Euro/ each

£/ each

30 35 38 40 42 45 47 48 50 51 52 53 55 57 58 60 62 63 64 65 68 70 75 76 77 80 83 85 90 93 95 100 105 106 110 115 120 125 127 130 135 145 150 160 165 180 188 192 195 207 230 240 256 275 282 315 335

Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 183 mm.

97

optibelt-ZRP Polyurethane Timing Belts, inch

Construction: Polyurethane with Steel tension cord

Type L

(nominal dimensions – mm)

Type L - pitch 9,525 mm Belt No.

K 124 L K 150 L K 165 L• K 173 L• K 187 L K 210 L K 225 L K 240 L K 255 L K 270 L K 285 L K 300 L K 322 L K 345 L K 367 L K 375 L• K 390 L K 420 L K 427 L• K 450 L K 480 L K 510 L K 525 L• K 540 L K 600 L

98

Pitch length

(inch)

(mm)

12,38 15,00 16,50 17,25 18,75 21,00 22,50 24,00 25,50 27,00 28,50 30,00 32,25 34,50 36,75 37,50 39,00 42,00 42,75 45,00 48,00 51,00 52,50 54,00 60,00

314,33 381,00 419,10 438,15 476,25 533,40 571,50 609,60 647,70 685,80 723,90 762,00 819,15 876,30 933,45 952,50 990,60 1066,80 1085,85 1143,00 1219,20 1295,40 1333,50 1371,60 1524,00

Number of teeth

1/2" width ≈ 3,175 mm Code No. 050 Euro/ each

£/ each

3/4" width ≈ 4,763 mm Code No. 075 Euro/ each

£/ each

1" width ≈ 6,35 mm Code No. 100 Euro/ each

£/ each

1 1/2" width ≈ 7,94 mm Code No. 150 Euro/ each

£/ each

33 40 44 46 50 56 60 64 68 72 76 80 86 92 98 100 104 112 114 120 128 136 140 144 160

Further sizes on request.

Minimum order quantity: 2 sleeves, Subject to change of sleeve width: ≈ 183 mm.

optibelt-ZRL Open Ended or Joined Endless Timing Belting

Type Pitch

XL t

Tooth angle β

XL / L / H / XH

8M / 14M

Construction: Polyurethane with Aramid or steel tension cord

L

H

XH

8M

14M

5,08 9,525 12,7 22,225 8,00 14,00 50°

40°

40°

40°

—

—

Height of tooth ht 1,27

1,91

2,29

6,35

3,38

6,10

Width of tooth s

2,57

4,65

6,12 12,57

—

—

hs 2,30

3,60

4,30 11,20 5,60 10,00

Total belt thickness

Aramid cord Belt No.

Pitch (mm)

Belt width (mm)

Euro/metre

£/metre

Joining endless Belt length up to 7000 mm Euro/each

XL 025 XL 031 XL 037 XL 050 XL 075 XL 100• L 037 L 050 L 075 L 100 L 150 L 200 H 050 H 075 H 100 H 150 H 200 H 300 H 400• XH 100• XH 200• XH 300• XH 400• 8M 20• 8M 25• 8M 30• 8M 50• 8M 85• 14M 25• 14M 40• 14M 55• 14M 85•

5,080 5,080 5,080 5,080 5,080 5,080 9,525 9,525 9,525 9,525 9,525 9,525 12,700 12,700 12,700 12,700 12,700 12,700 12,700 22,225 22,225 22,225 22,225 8,000 8,000 8,000 8,000 8,000 14,000 14,000 14,000 14,000

XL = 500 mm L = 500 mm H = 500 mm

Euro/each

£/each

6,35 7,94 9,53 12,70 19,05 25,40 9,53 12,70 19,05 25,40 38,10 50,80 12,70 19,05 25,40 38,10 50,80 76,20 101,60 25,40 50,80 76,20 101,60 20,00 25,00 30,00 50,00 85,00 25,00 40,00 55,00 85,00

Minimum lengths for splicing Timing Belts endless: Aramid cord

£/each

Joining endless Belt length over 7000 mm

• Non stock items, delivery times on request. Further widths on request. Length of roll: 50 metres. Surcharge for shorter lengths: 20 % Minimum quantities for splicing belts endless with Aramid tension cord: 2 for each size

99

optibelt-ZRL Open Ended or Joined Endless Timing Belting

Type Pitch

XL t

Tooth angle β

XL / L / H / XH

8M / 14M

Construction: Polyurethane with Aramid or steel tension cord

L

H

XH

8M

14M

5,08 9,525 12,7 22,225 8,00 14,00 50°

40°

40°

40°

—

—

Height of tooth ht 1,27

1,91

2,29

6,35

3,38

6,10

Width of tooth s

2,57

4,65

6,12 12,57

—

—

hs 2,30

3,60

4,30 11,20 5,60 10,00

Total belt thickness

Steel cord Belt No.

Pitch (mm)

Belt width (mm)

Euro/metre

£/metre

Joining endless Belt length up to 7000 mm Euro/each

XL 025 - St• XL 031 - St• XL 037 - St• XL 050 - St• XL 075 - St• XL 100 - St• L 037 - St L 050 - St L 075 - St L 100 - St L 150 - St• L 200 - St• H 050 - St• H 075 - St H 100 - St H 150 - St H 200 - St H 300 - St H 400 - St• XH 100 - St▲ XH 200 - St▲ XH 300 - St▲ XH 400 - St▲ 8M 20 - St 8M 25 - St 8M 30 - St 8M 50 - St 8M 85 - St 14M 25 - St 14M 40 - St 14M 55 - St 14M 85 - St

5,080 5,080 5,080 5,080 5,080 5,080 9,525 9,525 9,525 9,525 9,525 9,525 12,700 12,700 12,700 12,700 12,700 12,700 12,700 22,225 22,225 22,225 22,225 8,000 8,000 8,000 8,000 8,000 14,000 14,000 14,000 14,000

L H XH 8M 14M 100

= 1000 mm = 1000 mm = 1000 mm = 1000 mm = 1000 mm

Euro/each

6,35 7,94 9,53 12,70 19,05 25,40 9,53 12,70 19,05 25,40 38,10 50,80 12,70 19,05 25,40 38,10 50,80 76,20 101,60 25,40 50,80 76,20 101,60 20,00 25,00 30,00 50,00 85,00 25,00 40,00 55,00 85,00

Minimum lengths for splicing Timing Belts endless: Steel wire cord

£/each

Joining endless Belt length over 7000 mm

• Non stock items, delivery times on request. ▲ = with PAZ fabric on tooth face Further widths on request. Length of roll: 50 metres. Surcharge for shorter lengths: 20 %. Minimum quantities for splicing belts endless with steel tension cord: 2 for each size

£/each

optibelt-ZRL Open Ended or Joined Endless Timing Belting

Type Pitch

T 5 / T 10 / T 20

AT 5 / AT 10 / AT 20

Construction: Polyurethane with Aramid or steel tension cord

T5

T 10

T 20

AT 5 AT 10 AT 20

t

5,0

10,0

20,0

5,0

10,0

20,0

Tooth angle β

40°

40°

40°

50°

50°

50°

Height of tooth ht

1,20

2,50

5,00

1,20

2,50

5,00

Width of tooth s/b 2,65 Total belt hs 2,20 thickness

5,30 10,15 2,50

5,00 10,00

4,50

4,50

8,00

2,70

8,00

Aramid cord Belt No.

Pitch (mm)

Belt width (mm)

Euro/metre

£/metre

Joining endless Belt length up to 7000 mm Euro/each

6T5 8T5 10 T 5 12 T 5 16 T 5 20 T 5 25 T 5 32 T 5 50 T 5• 10 T 10 12 T 10 16 T 10 20 T 10 25 T 10 32 T 10 40 T 10 50 T 10 75 T 10 100 T 10 25 T 20 32 T 20 50 T 20 75 T 20 100 T 20 6 AT 5• 10 AT 5• 16 AT 5• 25 AT 5• 32 AT 5• 50 AT 5• 16 AT 10• 25 AT 10• 32 AT 10• 50 AT 10• 75 AT 10• 100 AT 10• 25 AT 20• 32 AT 20• 50 AT 20• 75 AT 20• 100 AT 20•

5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 20,0 20,0 20,0 20,0 20,0 5,0 5,0 5,0 5,0 5,0 5,0 10,0 10,0 10,0 10,0 10,0 10,0 20,0 20,0 20,0 20,0 20,0

T 5 = 500 mm T 10 = 500 mm T 20 = 900 mm

Euro/each

£/each

6,0 8,0 10,0 12,0 16,0 20,0 25,0 32,0 50,0 10,0 12,0 16,0 20,0 25,0 32,0 40,0 50,0 75,0 100,0 25,0 32,0 50,0 75,0 100,0 6,0 10,0 16,0 25,0 32,0 50,0 16,0 25,0 32,0 50,0 75,0 100,0 25,0 32,0 50,0 75,0 100,0

Minimum lengths for splicing Timing Belts endless: Aramid cord

£/each

Joining endless Belt length over 7000 mm

• Non stock items, delivery times on request. Further widths on request. Length of roll: 50 metres. Surcharge for shorter lengths: 20 %

101

optibelt-ZRL Open Ended or Joined Endless Timing Belting

Type Pitch

T 5 / T 10 / T 20

T5

T 10

T 20

t

5,0

10,0

20,0

5,0

10,0

20,0

Tooth angle β

40°

40°

40°

50°

50°

50°

Height of tooth ht

1,20

2,50

5,00

1,20

2,50

5,00

Width of tooth s/b 2,65 Total belt hs 2,20 thickness

AT 5 / AT 10 / AT 20

Construction: Polyurethane with Aramid or steel tension cord

AT 5 AT 10 AT 20

5,30 10,15 2,50

5,00 10,00

4,50

5,00

8,00

2,70

9,00

Steel wire cord Belt No.

Pitch (mm)

Belt width (mm)

Euro/metre

£/metre

Joining endless Belt length up to 7000 mm Euro/each

6 T 5 - St 8 T 5 - St 10 T 5 - St 12 T 5 - St 16 T 5 - St 20 T 5 - St 25 T 5 - St 32 T 5 - St• 50 T 5 - St 10 T 10 - St• 12 T 10 - St 16 T 10 - St 20 T 10 - St 25 T 10 - St 32 T 10 - St 40 T 10 - St 50 T 10 - St 75 T 10 - St 100 T 10 - St 25 T 20 - St 32 T 20 - St 50 T 20 - St 75 T 20 - St• 100 T 20 - St 6 AT 5 - St 10 AT 5 - St 16 AT 5 - St 25 AT 5 - St 32 AT 5 - St 50 AT 5 - St 16 AT 10 - St 25 AT 10 - St 32 AT 10 - St 50 AT 10 - St 75 AT 10 - St• 100 AT 10 - St 25 AT 20 - St 32 AT 20 - St 50 AT 20 - St 75 AT 20 - St 100 AT 20 - St

5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 5,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 20,0 20,0 20,0 20,0 20,0 5,0 5,0 5,0 5,0 5,0 5,0 10,0 10,0 10,0 10,0 10,0 10,0 20,0 20,0 20,0 20,0 20,0

T5 T 10 T 20 AT 5 AT 10 AT 20 102

= 600 mm = 600 mm = 1000 mm = 1000 mm = 1000 mm = 1000 mm

Euro/each

6,0 8,0 10,0 12,0 16,0 20,0 25,0 32,0 50,0 10,0 12,0 16,0 20,0 25,0 32,0 40,0 50,0 75,0 100,0 25,0 32,0 50,0 75,0 100,0 6,0 10,0 16,0 25,0 32,0 50,0 16,0 25,0 32,0 50,0 75,0 100,0 25,0 32,0 50,0 75,0 100,0

Minimum lengths for splicing Timing Belts endless: Steel wire cord

£/each

Joining endless Belt length over 7000 mm

• Non stock items, delivery times on request. Further widths on request. Length of roll: 50 metres. Surcharge for shorter lengths: 20 % Minimum quantities for splicing belts endless with steel tension cord: 2 for each size

£/each

optibelt-CP Clamping Plates

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

• •

•

• •

•

•

•

•

•

•

• •

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

• •

•

•

•

•

• •

•

• •

•

•

•

•

• •

•

Designation

CP-XL 025 CP-XL 037 CP-XL 050 CP-XL 075 CP-XL 100• CP-L 037 CP-L 050 CP-L 075 CP-L 100 CP-L 150 CP-L 200 CP-H 050 CP-H 075 CP-H 100 CP-H 150 CP-H 200 CP-H 300 CP-H 400• CP-5M 06 CP-5M 09 CP-5M 15 CP-5M 25 CP-8M 10 CP-8M 15 CP-8M 20 CP-8M 30 CP-8M 50 CP-8M 85 CP-14M 25 CP-14M 40 CP-14M 55 CP-14M 85 CP-14M 115•

Further sizes on request.

Pitch t (mm)

Belt width b (mm)

Material

5,080 5,080 5,080 5,080 5,080 9,525 9,525 9,525 9,525 9,525 9,525 12,700 12,700 12,700 12,700 12,700 12,700 12,700 5,000 5,000 5,000 5,000 8,000 8,000 8,000 8,000 8,000 8,000 14,000 14,000 14,000 14,000 14,000

6,35 9,53 12,70 19,05 25,40 9,53 12,70 19,05 25,40 38,10 50,80 12,70 19,05 25,40 38,10 50,80 76,20 101,60 6,00 9,00 15,00 25,00 10,00 15,00 20,00 30,00 50,00 85,00 25,00 40,00 55,00 85,00 115,00

Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al

• Non stock items.

•

B (mm)

b1 (mm)

L (mm)

e (mm)

H (mm)

d (mm)

Weight ≈ (kg)

25,5 28,5 32,0 38,0 45,0 36,0 39,0 45,0 51,5 64,0 77,0 45,0 51,0 57,5 70,0 83,0 108,0 134,0 25,0 28,0 34,0 44,0 35,0 40,0 45,0 55,0 75,0 110,0 56,0 71,0 86,0 116,0 146,0

6,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 8,0 8,0 10,0 10,0 10,0 10,0 10,0 10,0 10,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 8,0 8,0 10,0 10,0 10,0 10,0 10,0

42,5 42,5 42,5 42,5 42,5 76,6 76,6 76,6 76,6 76,6 76,6 106,9 106,9 106,9 106,9 106,9 106,9 106,9 41,8 41,8 41,8 41,8 66,0 66,0 66,0 66,0 66,0 66,0 116,0 116,0 116,0 116,0 116,0

3,5 3,5 3,5 3,5 3,5 5,0 5,0 5,0 5,0 5,0 5,0 9,0 9,0 9,0 9,0 9,0 9,0 9,0 3,2 3,2 3,2 3,2 5,0 5,0 5,0 5,0 5,0 5,0 9,0 9,0 9,0 9,0 9,0

8,0 8,0 8,0 8,0 8,0 15,0 15,0 15,0 15,0 15,0 15,0 22,0 22,0 22,0 22,0 22,0 22,0 22,0 8,0 8,0 8,0 8,0 15,0 15,0 15,0 15,0 15,0 15,0 22,0 22,0 22,0 22,0 22,0

5,5 5,5 5,5 5,5 5,5 9,0 9,0 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 11,0 11,0 11,0 5,5 5,5 5,5 5,5 9,0 9,0 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 11,0

0,020 0,025 0,027 0,032 0,038 0,095 0,104 0,121 0,140 0,177 0,215 0,050 0,075 0,100 0,150 0,200 0,300 0,400 0,015 0,018 0,022 0,030 0,075 0,085 0,100 0,120 0,170 0,250 0,315 0,405 0,495 0,860 1,195

Al = Aluminium

Euro/ each

£/ each

103

optibelt-CP Clamping Plates

•

• •

•

•

•

•

•

•

•

•

•

•

•

•

• •

•

•

•

•

•

•

•

• •

•

•

•

•

• • • •

•

• •

•

•

•

•

•

•

•

•

Designation

CP- 6 T5 CP- 10 T5 CP- 16 T5 CP- 25 T5 CP- 32 T5 CP- 50 T5• CP- 16 T10 CP- 25 T10 CP- 32 T10 CP- 50 T10 CP- 75 T10• CP-100 T10• CP- 25 T20 CP- 32 T20 CP- 50 T20 CP- 75 T20 CP-100 T20• CP- 6 AT5 CP- 10 AT5 CP- 16 AT5 CP- 25 AT5 CP- 32 AT5 CP- 50 AT5• CP- 16 AT10 CP- 25 AT10 CP- 32 AT10 CP- 50 AT10 CP- 75 AT10 CP-100 AT10• CP- 25 AT20 CP- 32 AT20 CP- 50 AT20 CP- 75 AT20 CP-100 AT20•

104

Pitch t (mm)

Belt width b (mm)

Material

5,000 5,000 5,000 5,000 5,000 5,000 10,000 10,000 10,000 10,000 10,000 10,000 20,000 20,000 20,000 20,000 20,000 5,000 5,000 5,000 5,000 5,000 5,000 10,000 10,000 10,000 10,000 10,000 10,000 20,000 20,000 20,000 20,000 20,000

6,00 10,00 16,00 25,00 32,00 50,00 16,00 25,00 32,00 50,00 75,00 100,00 25,00 32,00 50,00 75,00 100,00 6,00 10,00 16,00 25,00 32,00 50,00 16,00 25,00 32,00 50,00 75,00 100,00 25,00 32,00 50,00 75,00 100,00

Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al Al

•

•

•

•

•

•

•

•

•

•

•

•

B (mm)

b1 (mm)

L (mm)

25,0 29,0 35,0 44,0 51,0 69,0 41,0 50,0 57,0 75,0 100,0 125,0 56,0 65,0 81,0 106,0 132,0 25,0 29,0 35,0 44,0 51,0 61,0 41,0 50,0 57,0 75,0 100,0 125,0 56,0 65,0 81,0 106,0 132,0

6,0 6,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 8,0 8,0 10,0 10,0 10,0 10,0 10,0 6,0 6,0 6,0 6,0 6,0 6,0 8,0 8,0 8,0 8,0 8,0 8,0 10,0 10,0 10,0 10,0 10,0

41,8 41,8 41,8 41,8 41,8 41,8 80,0 80,0 80,0 80,0 80,0 80,0 160,0 160,0 160,0 160,0 160,0 41,8 41,8 41,8 41,8 41,8 41,8 80,0 80,0 80,0 80,0 80,0 80,0 160,0 160,0 160,0 160,0 160,0

•

•

•

•

e (mm)

H (mm)

d (mm)

Weight ≈ (kg)

3,2 3,2 3,2 3,2 3,2 3,2 5,0 5,0 5,0 5,0 5,0 5,0 10,0 10,0 10,0 10,0 10,0 3,2 3,2 3,2 3,2 3,2 3,2 5,0 5,0 5,0 5,0 5,0 5,0 10,0 10,0 10,0 10,0 10,0

8,0 8,0 8,0 8,0 8,0 8,0 15,0 15,0 15,0 15,0 15,0 15,0 20,0 20,0 20,0 20,0 20,0 8,0 8,0 8,0 8,0 8,0 8,0 15,0 15,0 15,0 15,0 15,0 15,0 20,0 20,0 20,0 20,0 20,0

5,5 5,5 5,5 5,5 5,5 5,5 9,0 9,0 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 11,0 5,5 5,5 5,5 5,5 5,5 5,5 9,0 9,0 9,0 9,0 9,0 9,0 11,0 11,0 11,0 11,0 11,0

0,020 0,025 0,030 0,036 0,042 0,051 0,115 0,140 0,160 0,215 0,290 0,370 0,385 0,450 0,570 0,755 0,940 0,016 0,019 0,024 0,031 0,036 0,043 0,110 0,135 0,155 0,205 0,280 0,350 0,385 0,450 0,570 0,755 0,940

Further sizes on request.

Euro/ each

• Non stock items.

•

•

•

•

£/ each

Al = Aluminium

optibelt-RB Ribbed Belts

Section

PH

PJ

s=

1,6

2,34

H≈

2,5

3,50

H

Section PH (Non stock items) Effective length

Effective length

Effective length

(mm)

(inch)

(mm)

(inch)

(mm)

559 698 735 762 813 858 864 886 914 955 965 975 990 1016 1080

22,0 27,5 28,9 30,0 32,0 33,8 34,0 34,9 36,0 37,6 38,0 38,4 39,0 40,0 42,5

1092 1096 1168 1194 1200 1222 1230 1262 1270 1285 1290 1301 1309 1316 1321

43,0 43,1 46,0 47,0 47,2 48,1 48,4 49,7 50,0 50,6 50,8 51,2 51,5 51,8 52,0

1333 1371 1397 1439 1475 1600 1854 1895 1915 1930 1956 1992 2083 2155

(inch)

52,5 54,0 55,0 56,7 58,1 63,0 73,0 74,6 75,4 76,0 77,0 78,4 82,0 84,8

Prices and minimum quantities on request. Belt weight: 1 rib ≈ 0,005 kg/m

Section PJ Effective length (mm)

(inch)

280 330 356 362 381 406 414 432 457 483 508 559 584 610 660 711 723 762 813 836 864 914 955 965 1016 1092 1105 1110 1123 1130 1150 1168 1194 1200 1222 1244

11,0 13,0 14,0 14,3 15,0 16,0 16,3 17,0 18,0 19,0 20,0 22,0 23,0 24,0 26,0 28,0 28,5 30,0 32,0 32,9 34,0 36,0 37,6 38,0 40,0 43,0 43,5 43,7 44,2 44,5 45,3 46,0 47,0 47,3 48,1 49,0

Further sizes on request.

Cut belts Euro per rib

Effective length £ per rib

(mm)

(inch)

1262 1270 1285 1301 1309 1316 1321 1333 1355 1371 1397 1428 1439 1475 1549 1600 1651 1663 1752 1780 1854 1895 1910 1915 1930 1956 1965 1981 1992 2083 2155 2210 2337 2489

49,7 50,0 50,6 51,2 51,5 51,8 52,0 52,5 53,4 54,0 55,0 56,2 56,7 58,1 61,0 63,0 65,0 65,5 69,0 70,0 73,0 74,6 75,2 75,4 76,0 77,0 77,4 78,0 78,4 82,0 84,8 87,0 92,0 98,0

Cut belts Euro per rib

£ per rib

Belt weight: 1 rib ≈ 0,009 kg/m

105

optibelt-RB Ribbed Belts

H

Section

PK

s=

3,56

H≈

5,50

Section PK Effective length (mm)

559• 630 648 698 730 775 800 812 830 865 875 890 913 920 940 954 962 990 1015 1080 1090 1125 1150 1165 1190 1200• 1222• 1230• 1245 1270• 1285• 1290• 1321• 1330 1345

(inch)

22,0 24,8 25,5 27,5 28,7 30,5 31,5 32,0 32,7 34,0 34,5 35,0 36,0 36,2 37,0 37,6 37,8 39,0 40,0 42,5 43,0 44,3 45,3 45,9 46,8 47,2 48,1 48,4 49,0 50,0 50,6 50,8 52,0 52,4 53,0

Euro per rib

£ per rib

Effective length (mm)

(inch)

1371• 1397• 1439• 1460 1520 1560 1570 1600• 1655 1690 1755 1854• 1885 1930• 1956• 1980 2030 2050 2080 2120 2145 2170 2235• 2255 2362• 2460 2515• 2743• 2845•

54,0 55,0 56,7 57,5 59,8 61,4 61,8 63,0 65,2 66,5 69,1 73,0 74,2 76,0 77,0 78,0 79,9 80,7 82,0 83,5 84,4 85,4 88,0 88,8 93,0 96,9 99,0 108,0 112,0

Euro per rib

£ per rib

Belt weight: 1 rib ≈ 0,020 kg/m

106

Further sizes on request.

• Non stock items, Minimum order quantity: 234 ribs.

optibelt-RB Ribbed Belts

H

Section

PL

PM

s=

4,7

9,4

H≈

7,0

13,0

Section PL Effective length (mm)

954 991 1075 1194 1270 1333 1371 1397 1422 1562 1613 1664 1715 1764 1803 1841 1943 1981 2020 2070 2096 2134 2197 2235 2324

(inch)

Cut belts Euro per rib

Effective length £ per rib

37,5 39,0 42,3 47,0 50,0 52,5 54,0 55,0 56,0 61,5 63,5 65,5 67,5 69,5 71,0 72,5 76,5 78,0 79,5 81,5 82,5 84,0 86,5 88,0 91,5

(mm)

(inch)

2362 2476 2515 2705 2743 2845 2895 2921 2997 3086 3124 3289 3327 3492 3696 4051 4191 4470 4622 5029 5385 6096

93,0 97,5 99,0 106,5 108,0 112,0 114,0 115,0 118,0 121,5 123,0 129,5 131,0 137,5 145,5 159,5 165,0 176,0 182,0 198,0 212,0 240,0

Cut belts Euro per rib

£ per rib

Belt weight: 1 rib ≈ 0,036 kg/m

Section PM Effective length (mm)

(inch)

2286 2388 2515 2693 2832 2921 3010 3124 3327 3531 3734 4089 4191 4470 4648

90,0 94,0 99,0 106,0 111,5 115,0 118,5 123,0 131,0 139,0 147,0 161,0 165,0 176,0 183,0

Cut Belts Euro per rib

Effective length £ per rib

(mm)

5029 5410 6121 6883 7646 8408 9169 9931 10693 12217 13741 15266

(inch)

Cut Belts Euro per rib

£ per rib

198,0 213,0 241,0 271,0 301,0 331,0 361,0 391,0 421,0 481,0 541,0 601,0

Belt weight: 1 rib ≈ 0,123 kg/m Further sizes on request.

107

optibelt-DK Double V-Belts

Section AA/HAA

Section BB/HBB

Section AA/HAA Euro/ each

Reference length (mm)

Belt No.

2000 2032 2370 2500 2650 2667 2800 3300 3920

77 78 91 96 102 103 108 128 152

Belt weight: ≈ 0,150 kg/m

Section BB/HBB £/ each

Euro/ each

Reference length (mm)

Belt No.

1980 2180 2300 2370 2500 2540 2600 2650 2740 2800 2850 2900 2920 3000 3030 3150 3250 3280 3325 3390 3450 3500 3550 3658 3730 3750 4010 4040 4200 4470 4500 4750 5000 5639 6900

75 83 88 90 95 97 99 101 105 107 109 111 112 115 116 121 125 126 128 131 133 135 137 141 144 145 155 156 162 173 174 184 194 221 270

Belt weight: ≈ 0,250 kg/m

Non standard lengths available:

To convert from Belt No. to Reference length

Section AA/HAA 1350 up to 28 000 mm Section BB/HBB 1350 up to 28 000 mm

Section AA/HAA – Belt No. x 25,4 = mm + 53 mm

Prices, delivery times and minimum production quantities for special lengths on request.

108

Section BB/HBB – (up to Belt Nr. 210) Belt No. x 25,4 = mm + 74 mm (over Belt No. 210) Belt No. x 25,4 = mm + 36 mm

£/ each

optibelt-DK Double V-Belts

Section CC/HCC

Section DD/HDD

Section 22 x 22

Section CC/HCC Euro/ each

Reference length (mm)

Belt No.

2280 2500 2800 3200 3310 3765 4000 4216 4300 4500 5000 5300 5340 5750

86 94 106 122 126 144 153 162 165 173 193 204 206 224

Belt weight: ≈ 0,440 kg/m

Section 22 x 22 5180 5220 5850 6270

Belt weight: ≈ 0,511 kg/m

Section 25 x 22

Section DD/HDD £/ each

Euro/ each

Reference length (mm)

Belt No.

£/ each

on request

Belt weight: ≈ 0,935 kg/m

Section 25 x 22 on request

Belt weight: ≈ 0,625 kg/m

Non standard lengths available:

To convert from Belt No. to Reference length

Section CC/HCC 1600 up to 28 000 mm Section 22 x 22 3000 up to 10 000 mm

Section CC/HCC – (up to Belt No. 210) Belt No. x 25,4 = mm + 107 mm (over Belt No. 210) Belt No. x 25,4 = mm + 56 mm

Prices, delivery times and minimum production quantities for special lengths on request.

Section DD/HDD – (up to Belt-No. 210) Belt No. x 25,4 = mm + 132 mm (over Belt No. 210) Belt No. x 25,4 = mm + 69 mm

109

optibelt-KK Polyurethane V-Belting optibelt-RR Polyurethane Round Section Belting

Section

8 Z/10 A/13 B/17 C/22

Width x Height (mm)

Roll length (m)

Weight (≈ kg/m)

8x 5 10 x 6 13 x 8 17 x 11 22 x 14

50 50 50 50 25

0,041 0,055 0,098 0,173 0,275

orange 87 Shore A Euro/ metre

white 92 Shore A

£/ metre

Euro/ metre

Minimum lengths for endless connection: Round Section Belting: 200 mm V-Belting: Section Z/10 up to A/13: 300 mm Section B/17: 500 mm Section 20 and C/22: 700 mm

£/ metre

white 98 Shore A Euro/ metre

£/ metre

Diameter (mm)

Roll length (m)

Weight (≈ kg/m)

2 3 4 5 6 7 8 10 12 15

200 200 200 200 100 100 100 100 50 50

0,004 0,009 0,016 0,024 0,035 0,048 0,064 0,096 0,132 0,211

green 87 Shore A Euro/ metre

£/ metre

Surcharge for welding:: 2 up to 8 mm Diameter: Euro/each 8,50 10 up to 15 mm Diameter: Euro/each 10,20

optibelt-KK Polyurethane V-Belting with Special Top Surfaces (white, 92 Shore A) Polyurethane V-Belting with Profiled Carrying Surfaces

Supergrip

Section

8 Z/10 A/13 B/17 C/22

Linatex

Width x Height (mm)

Roll length (m)

8x 5 10 x 6 13 x 8 17 x 11 22 x 14

50 50 50 50 25

Supergrip

HV 2-Laminate

Linatex

Form 1

HV 2-Laminate Form

Euro/ metre

£/ metre

Euro/ metre

£/ metre

Euro/ metre

£/ metre

1 2 1 2 1 2

• Non stock items Optibelt-KK and Optibelt-RR are supplied in lengths of approx. 50 metres. Surcharge – short lengths: below 10 metres: 70 % from 10 up to 50 metres: 25 % Surcharge for welding:

110

Section 8 up to B/17: Euro/each 8,50 Section C/22: Euro/each 10,20 Form 1 and 2: Euro/each 22,50

Section

A/13 A/13 B/17 B/17 C/22 C/22

Form 2

Roll length (m)

25 25 25 25 25 25

Profiled carrying surface Euro/ metre

£/ metre

optibelt-KK Polyurethane V-Belting with Supergrip Surface Product description: Optibelt-KK Polyurethane V-Belting, white, approx. 92 Shore A. Surface: Supergrip, green, PVC = oil and grease resistant, solvent resistant. Application: Suitable for the wood and ceramic industries.

optibelt-KK Polyurethane V-Belting with Linatex Surface Product description: Optibelt-KK Polyurethane V-Belting, white, approx. 92 Shore A. Surface: Linatex, red, high quality natural rubber, approx. 35 up to 40 Shore A, wear resistant, adhesive and cut resistant, not oil or grease resistant. Application: For applications where sharp edged products are involved. For example in the glass and metal industries

optibelt-KK Polyurethane V-Belting with HV 2 – Laminate, transparent Product description: Optibelt-KK Polyurethane V-Belting, white, approx. 92 Shore A. Surface: HV 2-Laminate, transparent, H-Vulkolan, extra-abrasion protection and solvent resistant. Application: Particularly suitable for the transport of unpacked food stuffs, food products and other materials.

optibelt-KK Polyurethane V-Belting with Profiled Carrying Surfaces, Form 1 and 2 Product description: Optibelt-KK Polyurethane V-Belting, white, approx. 92 Shore A. Surface: The pointed surface is made from the same material as the basic belt. Application: Particularly suitable in the ceramic and woodworking industries, for example on transport systems for painting processes.

Splicing tools (up to section C/22) For V-Belting and Round Section Belting from ∅ 8 mm

For Round Section Belting and V-Belting up to Section Z/10

Guiding tong B 2

Guiding tong B 3

Table attachment for guiding tong

Welding tool incl. welding plate

Welding plate

Shear

111

optimat-OE Open Ended V-Belting DIN 2216, Punched

Standard Section

Y/6 8 Z/10 A/13 B/17 20 C/22 25 D/32 E/40

Width x Height (mm)

Weight (≈ kg/m)

6x 4 8x 5 10 x 6 13 x 8 17 x 11 20 x 12,5 22 x 14 25 x 16 32 x 20 40 x 25

0,030 0,050 0,070 0,120 0,200 0,270 0,340 0,440 0,680 1,000

Polyester

green top surface Euro/ metre

Plate connectors

red top surface

£/ metre

Euro/ metre

Weight (≈ kg/ 100 pcs.)

£/ metre

Euro/ each

Link connectors £/ each

Weight (≈ kg/ 100 pcs.)

0,1 0,2 0,3 0,5 0,8 1,4 1,7 2,1 5,0 10,0

Euro/ each

£/ each

— — 0,7 1,8 2,9 4,6 5,7 5,7 16,0 —

Minimum pulley pitch diameter (mm)

50 63 80 100 140 180 224 250 355 500

Special Constructions Construction “S" with black chloroprene top surface: 10 % surcharge. Unpunched: no surcharge. • Non stock items. ¢ These items will be discontinued when present stock is depleted.

optimat-DK Open Ended Double V-Belting, Punched

Standard Section

AA/13 BB/17 20 CC/22

Weight x Height (mm)

Weight (≈ kg/m)

13 x 10,5 17 x 14 20 x 16 22 x 18

0,140 0,250 0,320 0,410

green top surface Euro/ metre

£/ metre

Plate connectors Weight (≈ kg/ 100 each)

0,6 1,2 1,6 2,2

Special Constructions Construction “S" with black chloroprene top surface: 10 % surcharge. Unpunched: no surcharge. • Non stock items. ¢ These items will be discontinued when present stock is depleted. 112

Euro/ each

Link connectors £/ each

Weight (≈ kg/ 100 pcs.)

1,7 2,6 3,7 4,4

Euro/ each

£/ each

Minimum pulley pitch diameter (mm)

140 160 200 224

optimat-FK Open Ended Conveyor Belting, Punched

Standard Section

Width x Height (≈ kg/m)

Weight (≈ kg/m)

green Euro/ metre

13 x 20 17 x 30 22 x 40 32 x 60

20 x 16,5 30 x 20 40 x 24 60 x 33

£/ metre

brown, abrasion and oil resistant Euro/ £/ metre metre

Polyester white, abrasion resistant Euro/ metre

£/ metre

13 x 20 17 x 30 22 x 40 32 x 60

Euro/ metre

£/ metre

white, abrasion resistant Euro/ metre

£/ metre

0,320 0,460 0,740 1,300

Plate connectors Section

brown, abrasion and oil resistant

Width x Height (≈ kg/m)

20 x 16,5 30 x 20 40 x 24 60 x 33

Weight (≈ kg/100 pcs.)

0,6 0,9 1,8 5,6

Euro/ each

Link connectors £/ each

Weight (≈ kg/100 pcs.)

2,6 3,7 5,4 5,7

Euro/ each

£/ each

Minimum Pulley Diameter (mm)

140 160 250 450

Optimat Belting OE, SK, DK and FK are supplied in lengths of approx. 50 metres. Surcharge for short lengths below 10 metres: 70 % from 10 up to 49 metres: 25 % • Non stock items, Minimum order quantity: 1 roll.

113

optimat-PKR Open Ended V-Belting DIN 2216 with Special Top Surfaces

PKR 0

PKR 1

PKR 0

Section

PKR 1

Euro/metre S

P

PKR 2

£/metre S

PKR 2

Euro/metre P

S

£/metre P

S

Euro/metre P

S

£/metre P

S

P

Z/10 A/13 B/17 C/22 25 D/32

S = Standard; P = Polyester • Special constructions are only available in lengths of approx. 50 metres.

Temperature resistance (°C)

Hardness (Shore A)

Oil resistant

Staining

CR/red brown

- 25 to + 100

≈ 50

limited

no

Pitch (mm)

SBR-NR/light

- 40 to + 70

≈ 45

no

no

Quality/Colour

PKR 0 Height of patterns Patterns

Standard (mm)

max. (mm)

PKR 0

2

3

–

NR/red brown

- 40 to + 70

≈ 48

no

no

PKR 1✦

3

3

10

SBR-NR/light

- 40 to + 70

≈ 45

no

no

PKR 2

3

–

–

CR/red brown

- 25 to + 100

≈ 50

limited

no

CR/black

- 25 to + 100

≈ 68

limited

yes

✦ Sections 25 and D/32 height of patterns only 5 mm possible.

PKR 1 and PKR 2

optibelt-LB Link Belting Polyurethane with polyester laminations

Standard Type

Section (Standard)

Weight ≈ (kg/m)

8 Z/10 A/13 B/17 C/22¢

0,120 0,135 0,163 0,230 0,370

Euro/metre

Type T

£/metre

Section (Type T)

8T 10 T 13 T 17 T 22 T

Weight ≈ (kg/m)

0,116 0,131 0,158 0,223 0,359

Further sections and constructions on request. Optibelt-LB is supplied in boxes containing rolls of 20 metres. Each box is delivered with a free splicing tool. Separate splicing tool: Euro 6.00 net/each. Surcharge for Optibelt-LB below 20 metres: 30 %. ¢ These items will be discontinued when present stock is depleted. 114

Euro/metre

£/metre

optibelt-RF Rubber Covered Flat Belting Type B 50 (Non stock items)

Width (mm)

3 Plies Euro/metres

4 Plies £/metres

Euro/metres

5 Plies £/metres

Euro/metres

£/metres

20 25 30 35 40 50 60 70 80 90 100 110 115 120 130 140 150 160 170 180 190 200 220 230 240 250 280 300 400 500 1000

Thickness ≈ (mm)

3,6

4,8

6,0

Weight ≈ (kg/m2)

3,8

5,1

6,4

Minimum pulley diameter (mm)

89

120

160

Further widths and endless connectors on request. Length of roll: 50 metres Surcharges for short lengths 1 to 25 metres: 30 % surcharge over 25 up to 50 metres: 15 % surcharge

Minimum length for vulcanising endless: 1450 mm. Shorter lengths are possible using adhesives or fasteners. Cost for making the belt endless = Price for 3 metres of belting. Minimum price Euro/piece = 45,00 net. 115

optibelt-CF Cable Cord Flat Belting (Non stock items)

Width

Weight

(mm)

≈ (kg/m)

60 70 80 90 100 110 120 130 140 150 160 170

0,360 0,420 0,480 0,540 0,600 0,660 0,720 0,780 0,840 0,900 0,960 1,080

Minimum width: 30 mm 116

1 to 4 pcs. Euro/metre

Maximum width: 550 mm

5 to 99 pcs. £/metre

Minimum length: 1000 mm

Euro/metre

£/metre

Maximum length: 23 000 mm

optimax-HF High Capacity Flat Belts

Type 075: h = 0,5 mm Type 150: h = 1,0 mm

W

Optimax-HF Type 075, Type 150 W (mm)

Euro/ £/ each each

Euro/ each

10

Li (mm)

£/ each

15

Euro/ each

£/ each

20

Euro/ each

£/ each

Euro/ £/ each each

Euro/ £/ each each

Euro/ £/ each each

30

35

40

2210 2220 2240 2250 2270 2280 2290 2300 2320 2340 2350 2370 2380 2400 2430 2440 2450 2480 2500 2520 2550 2570 2600 2650 2660

2700 2750 2780 2800 2850 2900 2950 3000 3050 3100 3150 3200 3250 3300 3400 3500 3600

25

200– 600 601– 700 701– 800 801– 900 901–1000 1001–1200 1201–1400 1401–1600 1601–1800 1801–2000 2001–2200 2201–2400 2401–2600 2601–2800 2801–3000 3001–3200 3201–3400 3401–3600 3601–3800 Type 150: ex stock; Type 075: Non stock items. Standard range Optimax-HF Type 150 (Li mm) 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 610 620 630 640

650 660 670 680 690 695 700 710 720 730 740 750 760 770 780 790 800 810 820 830 840 850 860 870 880

890 900 910 920 930 935 940 950 960 970 980 990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120

1130 1140 1150 1160 1170 1180 1190 1200 1210 1220 1230 1240 1250 1260 1270 1280 1290 1300 1310 1320 1330 1340 1350 1360 1370

1380 1390 1400 1410 1420 1430 1440 1450 1460 1470 1480 1490 1500 1510 1520 1530 1540 1550 1560 1570 1580 1590 1600 1610 1620

1630 1640 1650 1660 1670 1680 1700 1710 1720 1730 1740 1750 1760 1770 1780 1790 1800 1810 1820 1830 1840 1850 1860 1870 1880

1890 1900 1920 1930 1940 1950 1960 1970 1980 2000 2020 2030 2040 2050 2060 2070 2090 2100 2110 2120 2130 2140 2150 2190 2200

117

optimax-HF High Capacity Flat Belts

Type 075: h = 0,5 mm Type 150: h = 1,0 mm

W

Optimax-HF Type 075, Type 150 W (mm) Li (mm)

Euro/ £/ each each 50

Euro/ each

£/ each

60

Euro/ each

£/ each

70

Euro/ each 80

£/ each

Euro/ £/ each each

Euro/ £/ each each

Euro/ £/ each each

90

100

330

200– 600 601– 700 701– 800 801– 900 901–1000 1001–1200 1201–1400 1401–1600 1601–1800 1801–2000 2001–2200 2201–2400 2401–2600 2601–2800 2801–3000 3001–3200 3201–3400 3401–3600 3601–3800 Type 150: ex stock; Type 075: Non stock item

Widths Above length range can be supplied in every width up to max. 330 mm.

Tolerances a) Length tolerance:± 1% minimum ± 3mm b) Width tolerance: ± 0.5 mm, reducible down to ± 0.2 mm.

Intermediate lengths As well as standard lengths, intermediate lengths between 150 and 4 500 mm can be supplied on request.

Minimum order quantity Type 075: 1 sleeve = 330 mm / Type 150: 6 pieces each size

Further qualities and special constructions on request. Minimum order quantity surcharge: 1up to 5 pieces = 25 % 118

Weight Type 075 ≈ 0,620 kg/m2 Type 150 ≈ 1,210 kg/m2

optibelt-WR Polyurethane Wide Angle Belts (60°)

3M = 3 x 2 mm 5M = 5 x 3 mm 7M = 7 x 5 mm 11M = 11 x 7 mm

Outside length (mm)

Section 3M Euro/each

£/each

Section 5M Euro/each

£/each

Section 7M Euro/each

£/each

Section 11M Euro/each

£/each

180 185 190 195 200 206 212 218 224 230 236 243 250 258 265 272 280 290 300 307 315 325 335 345 355 365 375 387 400 412 425 437 450 462 475 487 500 515 530 545 560 580 600 615 630

Section 3M: Non stock items

Optibelt-WR Kraftbands on request.

119

optibelt-WR Polyurethane Wide Angle Belts (60°)

3M = 3 x 2 mm 5M = 5 x 3 mm 7M = 7 x 5 mm 11M = 11 x 7 mm

Outside length (mm)

Section 3M Euro/each

£/each

Section 5M Euro/each

£/each

Section 7M Euro/each

£/each

Section 11M Euro/each

£/each

650 670 690 710 730 750 775 800 825 850 875 900 925 950 975 1000 1030 1060 1090 1120 1150 1180 1220 1250 1280 1320 1360 1400 1450 1500 1550 1600 1650 1700 1750 1800 1850 1900 1950 2000 2060 2120 2180 2240 2300

Section 3M: Non stock items

120

Optibelt-WR Kraftbands on request.

Technical Information

Optibelt-SK and Optibelt Red Power Wedge Belts to BS 3790 and DIN 7753 Part 1/ISO 4184 Section

Dimension WxH≈

Section base width Wu ≈

Pitch width ld

SPZ

9,7 x 8

4,2

8,5

SPA

12,7 x 10

5,8

11,0

SPB

16,3 x 13

7,3

14,0

SPC

22,0 x 18

9,6

19,0

Belt length Nominal Outside length La length

Datum length Ld

La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈

Ld Li Ld Li Ld Li Ld Li

+ + + + + + + +

Datum length Ld

13 51 18 63 22 82 30 113

Inside length Li Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈

— — — —

Ld La Ld La Ld La Ld La

– – – – – – – –

38 51 45 63 60 82 83 113

Recommended minimum pulley diameter (mm)

Datum diameter dd

Belt weight (≈ kg/m)

63

0,074

90

0,123

140

0,195

224

0,377

63

0,074

140

0,195

315

0,575

Optibelt-SK and Optibelt Red Power Wedge Belts to USA-Standard RMA/MPTA 3V/9N

9,0 x 8

4,2

—

5V/15N

15,0 x 13

7,3

—

8V/25N

25,0 x 23

9,6

—

4∗

Li ≈ La – 42

Ld ≈ La – 11∗

Li ≈ La – 71

L d ≈ La –

— Outside length La

— —

Li ≈ La – 120

—

Outside diameter da

∗ The value for the difference between Ld and La is necessary if it is required to substitute a belt section to BS 3790 : 1991 or DIN 7753 Part 1 for a belt section to RMA/MPTA.

Optibelt Super TX M=S Moulded Cogged Raw Edge Wedge Belts – DIN 7753 Part 1 XPZ

9,7 x 8

4,2

8,5

XPA

12,7 x 10

5,8

11,0

XPB

16,3 x 13

7,3

14,0

XPC

22,0 x 18

9,6

19,0

Datum length Ld

L a ≈ Ld L a ≈ Li L a ≈ Ld L a ≈ Li L a ≈ Ld L a ≈ Li L a ≈ Ld L a ≈ Li

+ + + + + + + +

13 51 18 63 22 82 30 113

Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈

— — — —

Ld La Ld La Ld La Ld La

– – – – – – – –

38 51 45 63 60 82 83 113

Datum diameter dd

56

0,065

71

0,111

112

0,183

180

0,340

56

0,065

Optibelt Super TX M=S Moulded Cogged Raw Edge Wedge Belts – USA-Standard RMA/MPTA 3VX/9NX

9,0 x 8

4,2

—

Outside length La

Ld ≈ L a –

—

4∗

Li ≈ La – 42

Ld ≈ La – 11∗

Outside diameter da

Li ≈ La – 71 5VX/15NX 15,0 x 13 7,3 — 112 ∗ The value for the difference between Ld and La is necessary if it is required to substitute a belt section to BS 3790 : 1991 or DIN 7753 Part 1 for a belt section —

0,183

to RMA/MPTA.

Optibelt Super TX M=S Moulded Cogged Raw Edge Wedge Belts ZX/X10

10,0 x 6

5,9

8,5

AX/X13

13,0 x 8

7,5

11,0

BX/X17

17,0 x 11

9,4

14,0

CX/X22

22,0 x 14

12,3

19,0

Datum length Ld

La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈

Li Ld Li Ld Li Ld Li Ld

+ + + + + + + +

38 16 50 20 69 29 88 30

Li Ld Li Ld Li Ld Li Ld Li Ld Li Ld Li Ld Li Ld Li Ld Li Ld Li Ld

+ + + + + + + + + + + + + + + + + + + + + +

19 8 25 10 31 12 38 16 50 20 69 29 79 31 88 30 100 39 126 51 157 77

Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈ Li ≈

— — — —

Ld La Ld La Ld La Ld La

– – – – – – – –

22 38 30 50 40 69 58 88

40

0,062

63

0,099

90

0,165

140

0,276

—

20

0,018

—

28

0,026

—

40

0,042

—

50

0,064

71

0,109

112

0,196

—

160

0,266

—

180

0,324

—

250

0,420

—

355

0,668

—

500

0,958

Datum diameter dd

Optibelt-VB V-Belts to BS 3790 and DIN 2215 / ISO 4184 5

5,0 x 3

2,8

4,2

Y/6

6,0 x 4

3,3

5,3

8

8,0 x 5

4,5

6,7

Z/10

10,0 x 6

5,9

8,5

A/13

13,0 x 8

7,5

11,0

B/17

17,0 x 11

20

9,4

14,0

20,0 x 12,5

11,4

17,0

C/22

22,0 x 14

12,3

19,0

25

25,0 x 16

14,0

21,0

D/32

32,0 x 20

18,2

27,0

E/40

40,0 x 25

22,8

32,0

Datum length Ld = Pitch length Lw/Lp

Datum length Ld

La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈ La ≈

Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈ Ld ≈

Li La Li La Li La Li La Li La Li La Li La Li La Li La Li La Li La

+ – + – + – + – + – + – + – + – + – + – + –

11 8 15 10 19 12 22 16 30 20 40 29 48 31 58 30 61 39 75 51 80 77

— —

Datum diameter dd

121

Technical Information

Optibelt-KB and Optibelt Red Power Kraftbands with Wedge Belts to ISO 5290 USA-Standard RMA/MPTA Section

3V/9J; 3VX/9JX

Height h≈ 9,9

Section base width Wu ≈

Belt length Nominal length

4,2

5V/15J; 5VX/15JX

15,1

7,3

8V/25J

25,5

9,6

Outside length La

Datum length Ld

— Outside length La

Inside length Li

—

Li ≈ La – 42

—

—

Li ≈ La – 71

—

—

Li ≈ La – 120

Recommended minimum pulley diameter (mm) Outside diameter da

Belt weight per rib (≈ kg/m)

67

0,122

160

0,252

315

0,693

Optibelt-KB and Optibelt Red Power Kraftbands with Wedge Belts SPZ

10,5

5,4

SPA

12,5

7,0

SPB

15,6

8,8

SPC

22,6

9,3

Datum length Ld

La ≈ Ld + 13

—

—

La ≈ Ld + 18

—

—

La ≈ Ld + 22

—

—

La ≈ Ld + 24

—

80

0,120

112

0,166

180

0,261

—

250

0,555

80

0,163

125

0,266

200

0,447

355

0,798

80

0,163

125

0,266

200

0,447

355

0,798

Datum diameter dd

Optibelt-KB Kraftbands with V-Belts to USA-Standard RMA/MPTA A

9,9

7,5

B

13,0

9,4

C

16,2

12,3

D

22,4

18,2

Inside length Li

La ≈ Li + 36

Ld ≈ Li + 30

—

La ≈ Li + 62

Ld ≈ Li + 40

—

La ≈ Li + 75

Ld ≈ Li + 58

—

La ≈ Li + 111

Ld ≈ Li + 75

—

Outside diameter da

Optibelt-KB Kraftbands with V-Belts to USA-Standard ASAE S 211.4 HA

9,9

7,5

HB

13,0

9,4

HC

16,2

12,3

HD

22,4

18,2

— Outside length La

—

Li ≈ La – 36

—

—

Li ≈ La – 62

—

—

Li ≈ La – 75

—

—

Li ≈ La – 111

Outside diameter da

The belt width of a Kraftband depends on the number of belts incorporated.

Optibelt-DK Double V-Belts to ISO 5289 Dimension WxH≈

Section base width bu ≈

AA/HAA

13 x 10

—

BB/HBB

17 x 13

—

CC/HCC

22 x 17

—

DD/HDD

32 x 25

—

Section

Nominal length

Belt length

Recommended minimum pulley diameter (mm)

Reference length = middle length – 4 Reference length

Reference length = middle length – 8 Reference length = middle length + 3

Outside diameter da

Reference length = middle length

Belt weight (≈ kg/m)

80

0,150

125

0,250

224

0,440

355

0,935

280

0,511

280

0,625

Optibelt-DK Double V-Belts – Special Sections 22 x 22

22 x 22

—

25 x 22

25 x 22

—

Datum length Ld = Pitch length Lw/Lp

122

Reference length

Reference length = middle length Reference length = middle length

Outside diameter da

optibelt Pulley Range

optibelt-KS V-Belt Pulleys optibelt-KS V-Belt Pulleys bored for Taper Bushes optibelt-KS Aluminium and Special Pulleys

optibelt-ZRS Timing Belt Pulleys optibelt-ZRS Timing Belt Pulleys bored for Taper Bushes

optichain-RK

Roller Chain

optichain-KTR Chain Sprockets optichain-KTR Chain Sprockets with Hub on one Side optichain-KTR Chain Sprockets bored for Taper Bushes 123

Technical Accessories Tension Gauges

Optikrik 0 Optikrik I Optikrik II Optikrik III

Measuring Range: 70 – 150 N Measuring Range: 150 – 600 N Measuring Range: 500 – 1400 N Measuring Range: 1300 – 3100 N

Measuring Gauge

Measuring Range: 10 – 600 Hz

V-Belt and Pulley Groove Templates

Measuring Range: 500 – 2500 mm inside length (Li) 124

Prices on request.

Notes

125

Notes

126

This Price List invalidates all previous lists. Design changes and errors reserved. Refer to our ”Standard Conditions of Business” for any matter concerning delivery or liability.

127

optibelt-SK High performance wedge belts to BS 3790, DIN 7753 Part 1 and RMA/MPTA

optibelt High performance wedge belts to BS 3790, DIN 7753 Part 1 and RMA/MPTA - service free

Automotive fan belts – raw edge, moulded cogged, maintenance free

Automotive fan belts – raw edge, moulded cogged, maintenance free, heavy duty, may be used in sets without restrictions

Moulded cogged raw edge belts to BS 3790 and DIN 7753 Part 1

optibelt-VB Classical V-Belts to BS 3790 and DIN 2215

optibelt-KB Kraftbands

optibelt-KB Kraftbands

optibelt-DK Double section V-belts DIN 7722

optibelt-ZR/HTD®/ZRK Timing belts

optibelt-PKR Endless V-belts with patterned top surface DIN 2215

Variable speed belts – moulded cogged raw edge

optibelt Timing belts

optibelt-ZRM/ZRP/ZRL Polyurethane timing belts and open ended timing belting

optibelt-RB/RBK Ribbed belts

optimax-HF Endless flat belts

optimat-OE Open ended V-belting, punched DIN 2216

optibelt-LB Link belting

optibelt-RR Round plastic belting

optibelt-KK Plastic V-belting

optibelt-KS V-grooved pulleys

optibelt-ZRS Timing belt pulleys

optichain-RK/KTR Roller chain Chain sprockets

optibelt-CE Clamping bushes