Connected Of Rj 45 With Upt

CONNECTED OF RJ 45 WITH UTP’S CABLE A. INTRODUCTION In a local Area Network we need a media to connect between a Computer to other, RJ 45 and UTP are an instance of the media. Why I choice this title, because this subject very important the communication data system. B. BODY In data communication of a Local Area Nerwork, between one user or a workstation and other user or other workstation must be connected with wire as a transmission media which will connect between user and the hardware. There are two type of cables connection based on the sequence of colour.

PURPOSE 1. Knowing cable type end off connector used as by transmission media 2. Knowing the way of the tacking on between cable with connector ( especially RJ 45 ). THE EQUIPMENTS 1. UTP ( Unshielded Twisted Pair ) cable 2. Connector RJ 45 3. Crimping tool 4. Main tester THE PROCEDURS 1. Cut the cable by Crimping tool 2. Pare external husk of cable by crimping tool 3. Short and straighten cable strand of metal as according to colour standard sequence and extension type to be done 4. Insert the cable arrangement in to the connector RJ 45 and then use crimping tool to press the wire at the connector RJ 45 5. Cable test by Main Tester C. THE CONCLUSION We can use RJ 45 and cable UTP to connect some computers in LAN based on the sequence of colour at the wire D. REFERENCE Of the book covidence practice communication data

SEMINAR APPROVAL

Name Student Number Title of Paper Cable

: ROHMAT HUSEN : 0708310031 : Connected of RJ 45 with UTP

This paper has been approved and ready to be presented for the seminar that will be hold on Day / Date Time

: :

Jakarta,

Maret 2008

--------------------------------------------Seminar Approval

PRESENTATION OF SEMINAR Connected of RJ 45 with UTP Cable

THE COMPILER : ROHMAT HUSEN 0708310031

Academy of Telekommunication Indonesia Gemilang ( AKATELKOM ) Boulevard Kalimalang blok E 7 No. 16, 17, 18. Pangkalan Jati – East Jakarta 2009