Bab I.docx

PROPOSAL INDUSTRIAL INTERSHIP

Arranged by: RIKI SETIAWAN 17 644 008

STUDY PROGRAM INDUSTRIAL CHEMICAL TECHNOLOGY CHEMICAL ENGINEERING DEPARTMENT POLITEKNIK NEGERI SAMARINDA 2019

Internship

In order to improve the quality of POLITEKNIK NEGERI SAMARINDA student then every prospective student of the S1-TERAPAN program is required to conduct an internship to apply the teaching and learning activities that have been conducted during the lecture and add insight into the students around the industry who will later become workplaces for undergraduateapplied student

Based on the statement, the student named:

Name

: RIKI SETIAWAN

Nim

: 17 644 008

Semester

: IV

Department

: CHEMICAL ENGINEERING

Study Program

: INDUSTRIAL CHEMICAL TECHNOLOGY

To be allowed to do an internship at:

Company

Address

: PT PERTAMINA RU V BALIKPAPAN

: JL. Yos Sudarso, Mekar Sari, Balikpapan Tengah, Prapatan, Kota Balikpapan, East Kalimantan

CHAPTER 1 PRELIMINARY A. Background Based on Government Regulation No.2 of 1989 concerning Education and Government Regulation No.30 of 1990 concerning Higher Education, it is stated that there are 2 (two) educational channels in Indonesia, namely academic lines and professional lines. In the academic path of science development, in general it includes pure sciences such as mathematics, physics, and others. Whereas in the professional path which is the ultimate goal of education, graduates can carry out (skilled) work on their respective disciplines prepared as ready-to-use personnel. Politeknik is one of the lines of professional education with emphasis on the proportion of curriculum compared to the practice between theory and the same. This is because after graduation students are expected to be ready to work, but it is realized that although the practice portion is already large, actual field experience is still needed. This is intended as a provision of knowledge so that it does not require special training or adjustments that are too long if they have graduated later. Therefore, it is important to do the Internship Program.In connection with this internship process, it is necessary to collaborate with companies and government agencies (who will later become users of Polytechnic graduates) to accommodate S1-Terapan students who will carry out internships. Indeed, it is realized, that the placement of students in jobs that are in accordance with their scientific discipline is an obstacle that is prone and confidential for a company or agency. For this reason, it should be stated that the purpose of this internship is solely to train students to work and study the world of companies or government agencies where they practice and train students to know the real conditions of the workplace. The Department of Chemical Engineering is a place where the development of science emerges and to meet the needs of experts and skilled in managing production systems or chemical industry systems, which involve human components, materials, and machinery / production facilities.The industrial world and universities are an interrelated entity. These relationships are often referred to as partnerships. A student who is studying, especially students majoring in engineering need to understand the real conditions that exist in the industrial world. Students not only understand theory and practice lectures, but also need to understand the real condition of the company. Changes in technology and the acceleration of information have affected aspects of the production process in the company. With the role of

universities, research and development is expected to be able to answer the challenges in these changes. Through an internship program at the company, this S1-Terapan student is expected to be able to find problems, which will then be analyzed, handled, and dealt with appropriately. This method is done by giving students the opportunity to go directly and find reality and problems that exist in the field / industry. Considering this, I chose PT PERTAMINA HULU MAHAKAM as my place of internship. I want to explore the Chemical Industry Process system in this company, in accordance with the department I took and my educational background, namely the Chemical Industry Technology Study Program majoring in Chemical Engineering at Politeknik Negeri Samarinda.

B. Purpose The internship objectives for S1-Terapan students are as follows: 1. Improve students' ability to the real conditions of the company 2. Add insight into chemical industry processes that are related to techniques that have been studied in college. 3. Being able to identify problems in the industry by going directly to the factory. 4. Able to provide solutions and appropriate handling of problems that exist in the industry.

C. Usability For students 1. Obtain practical work experience and learn more about the relevance of knowledge received during college, where theories and practices obtained can be applied in real situations in the field / industry. 2. Applying scientific disciplines that have been obtained and owned both on and off campus. 3. Expanding insight, knowledge, and deepening before plunging into the real field. And can measure the ability of yourself in dealing with technical problems, especially in the work environment later. 4. Is a variety of learning in order to explore Chemical Engineering which is directly related to the field and application in the field.

For the company 1. Helps complete tasks and daily work at the company where the internship is. 2. Means to bridge cooperative relations between companies and Politeknik Negeri Samarinda, especially regarding labor recruitment. 3. Corporate imaging facilities, especially in the scope of S1-Terapan students in the Politeknik Negeri Samarinda Chemical Engineering Department. For Politeknik Negeri Samarinda 1. Input to evaluate the extent to which Chemical Engineering Students understand and practice what has been practiced in college to be applied or used in the company. 2. Print a workforce that is skilled, creative, dynamic, professional, honest, and responsible for doing a job. 3. Imaging facilities at the Politeknik Negeri Samarinda in the company's environment and establishing cooperation with the place of internship company so that later it can facilitate the Politeknik graduates in finding work. CHAPTER II 1. Place and time of implementation a. the location of apprentice implementation The location of the execution of the internship is in PT PERTAMINA HULU SANGASANGA, located on JL. Cendrawasih No. 1 Muara Badak, East Kalimantan.

b. apprentice implementation Time Implementation time internships tailored to Academic Calendar State Polytechnic Samarinda that will be held on: Semester: IV (four) Duration: 4-6 month Date: February 10, 2020 – August 31, 2020

2. Participants of the internship Apprentice participant is conducted by students of the Politeknik Negeri Samrinda Department of Chemical Engineering Technology Courses in chemical industry, namely: name: RIKI SETIAWAN Nim: 17 644 008 Department: chemical engineering Course: Chemical Industry Technology

3. the method of Internship Methods used in this internship is: a. Participation, i.e., to participate in the activities/activity in the field of study chemical engineering at the company. b. observation, namely regarding work mechanism directly at the chemical industry Process and Analysis Laboratory in the field of study chemical engineering company.

4. Strategy Implementation Internship As for the strategies that will be undertaken during the implementation of the internship is: a. master and equip students with the field of study that will be examined during the execution of the internship. b. Reproduce literature-literature needed as a source of reference in the implementation of good practice as well as in the manufacture of its report. c. Mengonsultasikan things not understood during the execution of the internship to staff supervisor.

5. The role of the Students in the implementation of the internship Students act as subjects who perform internships while also contributing in the form of assistance to parties in implementing the company's internal activity of the company, having regard to the provisions set by the company .

6. Results to be achieved Results to be achieved in the activities of this internship is the increased quality of the skill of the students in the academic field that is not only based on the theory of the course but also the shape of the application in the form of practice. In addition, it also adds insightful work that can be used as a cornerstone in prospect future i.e. After entering the world of work. 7. Courses in Semester 5 learned over party consideration As PT PERTAMINA RU V BALIKPAPAN, I list the courses which I have traveled for 3 semester yesterday, I was required to travel in this 4 semester courses, and I'm going to travel in semester 5 and later are as follows: a. Semester I've traveled (1-3 Semester) 1. Introduction to chemical engineering 2. Basic Chemistry 3. Organic Chemistry 4. Basic Physics

5. Indonesian Language 6. Basic mathematics 7. United Kingdom Language Techniques 1 8. Machine Elements 9. the Pancasila 10. The principle of chemical engineering 11. Physical Chemistry 12. chemical analysis of the classic 13. Transport of fluid and Solid 14. Drawing techniques 15. Chemical Engineering Mathematics 1 16. The language of United Kingdom Engineering 2 17. K-3 and employment 18. Religious education 19. the mass and Energy Balance 20. Transfer process 21. Chemical Analysis Instruments 22. The process of chemical industry 23. Construction materials chemical engineering 24. Mechanical Treatment 25. Process control 26. Chemical Engineering Mathematics 2 27. Citizenship 28. The basic Chemistry lab course 29. Practical organic chemistry 30. Teaching physical chemistry 31. Chemical analysis of the practical-Classic 32. Practical Chemical Analysis Instruments 33. Teaching computer programming

b. Semester I was required to travel (Semester 4) 1. Chemical Engineering Thermodynamics 2. Chemical Reaction Engineering 1 3. Thermal mass transfer

4. Heat transfer 5. Bioprocessing 6. The Petroleum Technology 7. The design of the tool Processes 1 8. Research methodology 9. Industrial Management 10. Practical Control 11. Practical fluid mechanics and mass transfer

c. the Semester I would commute (5 Semesters) 1. Chemical Reaction Engineering 2 2. Utilities 3. Technology of coal 4. Technology of vegetable oil 5. Sewage treatment Techniques 6. The design of the tool Processes 2 7. Operation a multilevel Separation 8. Engineering Economics 9. Practical Utility and sewage treatment 10. Practical heat transfer and Thermodinamika

d. Transcript 1-3 Semester Grades (GPA While) • the attached e. Curriculum Vitae • the attached f. Copy Card Sign Student Sign Card & Inhabitants • the attached

CHAPTER III COVER

Great expectations of me to have party PT PERTAMINA RU V BALIKPAPAN deign gave me the opportunity to carry out this internship program. I also hope when I received, at the time of the internship program in this company, I can help and provide benefits for the company. Thus there will be reciprocity between the parties, other than that I also hope to have the guidance and supervision of the company. Upon the willingness of guidance and support from various parties, I say thank you. CURRICULUM VITAE 1. PERSONAL DATA Full name: Riki Setiawan Place/Date of birth: July 7, 1999, Bontang Gender: male Religion: Islam: blood type (A) Original address: JL. submarines, RT 13 Village Loktuan, district north of Bontang, East Kalimantan No. Phone number: 085932443799 Email: [email protected] 2.

FORMAL EDUCATION

• SD Negeri 004 Bontang (2011) • SMP Negeri 5 Bontang (2014) • SMA Negeri 3 Bontang (2017) • is currently completing Undergraduate studies-applied in the Department of Chemical Engineering Technology courses in chemical industry, Samara State Polytechnic Life motto: "life is art Illustrator without erasers, do your best to dimiki opportunity"

So this life-history list I made with real, may be beneficial.

Samarinda, February 12, 2019 Respect Me,

Riki Setiawan NIM. 17 644 008