2019 Final Titles.docx

S.no

1.PETROLEUM BASED MOLDING PROCESSS

01

Design and fabrication of clutch plate using styrene based open moulding process

02 03

Investigation of wear behaviour of clutch plate using chitosan and vinyl alcohol Design and fabrication of natural cellulose juliflora using thermo composite leaf spring

04

Fabrication and vibration analysis of railway sleepers using CFRP (carbon fiber reinforced plastic)

05

Investigation of organic polymers brake pad using on terracotta and zeolite with sic composite Investigation on organic waste brake pad and to study the effect of heat compression mould

06

07

Experimental and analysis of unsaturated polyester resin using nano silicon based gun barrel

08

Experimental and study of heat compress moulded gear using sugarcane bagasse with matrix composites

09

Design and fabrication of dam shutter doors by using chicken feather-glass fiber with epoxy

10

Design and fabrication of chain sprocket by using bamboo fiber and wool fiber with vinyl ester

11

Investigation of leaf spring using basalt, carbon and black fiber with matrix composites

12

Design and analysis of leaf spring using nano particle (zeolite) based tequilana, lotus and pineapple fiber with vinylester

13

Development and analysis of protecting shield by using s-glass and black fiber composites

14

Design and fabrication of plate by using kevlarfiber,e-glass fiber and cenosphere with epoxy

agave

Reinforcement of sugarcane bagasse with polyurethane resin 15 16

Design and fabrication of zeolite based bamboo fiber e-glass fiber with epoxy composites for two wheeler disc plate

17

Analysis of mechanical properties of disc plate by using e-glass and carbon fiber with vinyl ester composites

18 19

Design and fabrication of spur gear by using palm fiber ,aluminium powder with epoxy Design and analysis of spur gear by using black fiber ,e-glass fiber and carbon fiber with isopolymer

S.NO

2.MACHINING PROCESS

01

Investigation of surface roughness of various grinding wheel for bronze and gunmetal

02

Comparative analysis of mild steel before and after stabilization and evaluate machine parameters using edm

03

Optimization of machining process using EDM,ECM,AJM and wire cutting machining

S.NO

3.HYBRID METAL COMPOSITES

01

Design and analysis of fin using ballistic grade alloys and to improve the heat transfer efficiency

02

Design and analysis of rheocasting process spur gears using aluminium and zirconium

03

Experimental and investigation on semisolid casting process using bronze and gunmetal

04

Investigation on adhesive wear behaviour of aluminium silicon and titanium spur gear Experimental and investigation of rotavator blade material by using bronze and gun metal composite material Experimental and investigation of boron with magnesium composite material and evaluate the mechanical properties Experimental and investigation of brake drum material by using al-si with nickel

05 06 07

alloy composite material Experimental and investigation of heat transfer for radiator by changing 08

composite(bronze and copper oxide) using pin-fin apparatus

09

Design and analysis of composite rotovator blade (al-si-mg )

10

Experimental and investigation of nickel with chromium composite material and evaluate the mechanical properties

S.NO

4.SPRAYING

01

Investigation of wear behaviour of sprocket using nickel in HVOF method

02

Experimental and investigation on heat and mass transfer due to electrification of particles in spark plug

03

Investigation of wear behaviour of disc plate using chromium in HVOF method

04

Investigation of wear behaviour of disc plate using zirconium in PVD method

05

Investigation on nanocomposite anticorrosive coating for corrosion protection on turbine blade materials

06

Comparative analysis of wear rate of coated HSS tool and non-coated HSS tool by using chromium

07

Foul release coating of disc plate

08

Effect of corrosion behaviour on mild steel coated with nickel, chromium

09

Experimental

&

investigation

on

improving

life

of

spark

plug

using

on

improving

life

of

spark

plug

using

yttrium,zirconium coating 10

Experimental

&

investigation

zinc,chromium,nickel coating

S.NO

5.SUPERFICIAL HEAT TREATMENT AND CRYOGENIC TREATMENT

01 Prediction and increasing of low alloy steel performance by using chrome nanoparticles in superficial heat treatment 02

Increasing the performance of chain sprocket by using cryogenic treated and normalizing in superficial heat treatment

03

Investigation and study behaviour of chain sprocket hardening and quenching in mercury at various temperature

05

Fabrication of round rod based on cryogenic process by using waste water pocket

06

Investigation of cryogenic treated drill bit

S.NO

6.METAL JOINING PROCESS

01

Experimental and prediction analysis of SS using CTOD method

02

Investigation of mechanical behaviour of dissimilar metal welding for monel and inconel

03

Comparative analysis of cryo treated weld vs conventional weld

04

Dissimilar welding of alloy steels and stainless steel by using various parameters and to evaluate the cryogenic environment Experimental and prediction of ctod method used austenitic stainless steel and alloy steel welding A study of mechanical properties of TIG welded dissimilar joint of mild steel and

05 06

stainless steel (316) 07

Dissimilar welding of inconal 690 and alloy steel by using various parameters and to evaluate the mechanical properties of the weld material

08

Dissimilar welding of inconal 690 and stainless steel by using various parameters and to evaluate the mechanical properties of the weld material

S.NO

7.VIRTUAL REALITY

01

Investigation in virtual reality expansion in piping using various supports

02

Optimization of boiler pipelines using caesar

S.NO

01

8.NANOFLUIDS AND OIL PROJECTS

Comparative analysis of sae grade engine oil vs non edible oil

02

Analysis of radiator fluid blended with nano additives

03

Comparative analysis of load test hydraulic oils and various non edible oil

04

Comparative analysis of load test on hydraulic oils vs various non edible oil blended with nano additives

05

S.NO

Sae grade engine oil vs non edible oil blended with nano additives

9.AUTOMOBILE AND FABRICATION

01

Experimental and investigation of high altitude ignition using hydroxyl gas(hho)

02

Investigation and fabrication of oil spill recovery equipment by using polyurethene belt drive Design and analysis of hydro silencer for two wheeler and calculating the emission

03 04

Experimental and investigation of performance test on diesel engine by changing ball indended shape piston crown

05

Experimental and investigation of performance test on diesel engine by changing triangular shape piston crown

06

08

Experimental and investigation of performance test of engine by changing yttrium oxide coated spark plug Fabrication of dashboard cover by using agave tequilana, elephant grass, coconut and e-glass fiber with vinyl ester Fabrication of round rod based on cryogenic process by using waste water pocket

09

Design and analysis of catalytic converter by using kevlar, e-glass fiber with epoxy

07

for two wheeler and calculating the emission 10

S.NO 01

Design and analysis of zeolite silencer for two wheeler and calculating the emission

10.BIO DIESEL (OR) ALTERNATIVE FUELS Production of bio diesel from annonasquamosa and juliflora seeds by adding 2% of wasted snake oil for investigation of performance and emission.

02

Production of bio diesel from leucaenaleucocephala seeds for using efficiency performance analysis

03

Extraction of biodiesel from citrulluscolocynthis and sansevieriazeylanica and also predict the performance efficiency.

04

Production of bio diesel from leucaenaleucocephala seeds for using efficiency performance analysis

05

Extraction of biodiesel from citrulluscolocynthis and sansevieriazeylanica and also predict the performance efficiency.

06

Comparative

test

and

analysis

by

extracting

phoenix

coureiroi

and

leucaenaleucoephala biodieselvs diesel. 07

Comparative analysis sae20w40 vs cassia fistula,polyalthialongifolia oil.

08

Extraction of bio diesel from commiphorawightii and cassia fistula. Comparative analysis of conventional heat treatment with corn oil blended with indian red seed oil

09

Production of bio diesel from indian red seed and celastruspaniculatusseeds for investigating the performance analysis.

10 Production of bio diesel from cassia fistula and chicken fat for using performance analysis 11

Production of bio diesel from cassia fistula and tectonagrandisseed for using performance analysis

12

Extraction of biodiesel from citrulluscolocynthis and thevetianeriifolia seed and also predict the performance efficiency.

13

Production of bio diesel from annonasquamosa and neatsfoot oil for using performance analysis

14

Production of bio diesel from annonasquamosa and ziziphus seeds for investigating the performance analysis.

15

Performance analysis of i.c engines by blending pongumia, mustard oil and watermelon seed oil of alternative fuels

16

Analysis

and

performance

of

four

stroke

diesel

engines

by

using

polyalthialongifolia and annonasquamosa ,zizibus seeds. 17

Production of bio diesel from wasted fish oil and cassia fistula for investigating the efficiency performance.

18

Extraction of bio diesel from indian red seeds and evaluate the performance

efficiency by replacing usual engine oil. 19

Extraction of bio diesel using palm kernel oil recovered from spent bleaching earth.

20

Production of bio diesel from indian red seed and zizibus seeds for investigating the performance analysis.

21

Production of bio diesel from annonasquamosa and pork fat for using performance analysis

22 Production of bio diesel from cassia fistula and juliflora seed for using performance analysis