Zs077-bb-8200_8681 Crankset (english-20090219) V0 Dae

Service Instructions

BB-8200 / BB-8681 MegaExo Crankset Service Instructions Warranty

Congratulations on your Full Speed Ahead product. Please read these instructions and follow them for correct

Full Speed Ahead (FSA) warrants all FSA, Gravity, Vision and RPM products to be free from defects in

use. Since specific tools and experience are necessary for proper installation, it is recommended that the

materials or workmanship for a period of two years after original purchase unless otherwise stated in

Crankset be installed by a qualified bicycle technician. These instructions and instructions for other FSA products

the full warranty policy. The warranty is non-transferable and valid to the original purchaser of the

are available for download at http://www.fullspeedahead.com/techdoc

product only. Full warranty policy is available at www.fullspeedahead.com

Contact

If you have questions, please visit our web site contact page at :http://www.fullspeedahead.com/contact

Specification

Components

Model No. / Model Name BB-8200 / MegaExo Ceramic Bearing BB for K-Force Light

Follow the assembly order in the illustration: ⓞ Bottom Bracket (BB) Shell

④ Right Crank Arm x1

① Right BB Cup x1

⑤ Wave Washer x1

② Center Sleeve x1

⑥ M17 Crank Bolt x1

③ Left BB Cup x1

⑦ Left Crank Arm x1

BB Shell

68mm English (BC1.37”) or 70mm Italian (M36)

Model No. / Model Name BB-8681 / MegaExo Steel Bearing BB for SL-K Light BB Shell

68mm English (BC1.37”) or 70mm Italian (M36)

Revision Date 19-Feb-09

www.fullspeedahead.com

ZS077-v0

Page 1 of 4

Crankset Installation Follow the assembly order in the illustration:

1. 2.

Ensure that the BB shell threads are clean from machining chips, dirt, dust, etc. Install the R. Bearing Cup ① and Center Sleeve ②. Tighten the cup to 400-500 kgf.cm / 40-50 Nm / 354-443 in.lbs. (Use FSA MegaExo cup tool part no. E0139)

3.

Install the L. Bearing Cup ③. Tighten the cup to 400-500 kgf.cm / 40-50 Nm / 354-443 in.lbs

4. 5. 6.

Gently and completely insert the R. Crank ④ through the R. and L. Bearing Cup. Install the Wave Washer ⑤ onto the axle. Install the L. Crank Arm ⑦ onto the axle. Tighten the Crank Bolt ⑥ to 450-550 kgf.cm / 45-55 Nm / 390-485 in.lbs

7.

Revision Date 19-Feb-09

www.fullspeedahead.com

Install the M27 Self-extracting Bolt Cap and washer (Use FSA tool part no. EE023)

ZS077-v0

Page 2 of 4

Revision Date 19-Feb-09

www.fullspeedahead.com

ZS077-v0

Page 3 of 4

Full Speed Ahead, USA 12810 NE 178th St. Suite 102 Woodinville, WA 98072 Tel: 1_425_488_8653

Full Speed Ahead, Europe Via Del Lavoro, 56 20040 Busnago, Milan, ltaly Tel: +39_039_688_5265 Fax: +39_039_682_3336

Fax: 1_425_489_1082

Revision Date 19-Feb-09

www.fullspeedahead.com

TH INDUSTRIES / FSA Asia 487 Ko-Chung Rd. Ta-Li City 412 Taichung County, Taiwan Tel: +886_4_2406_8641

Fax: +886_4_2406_8076

ZS077-v0

Page 4 of 4