Zs067-xc-150 Through Axle&qr (english-20090113) V0

XC-150 Wheelset Service Instructions

Revision Date 13-Jan-09

www.fullspeedahead.com

ZS067-v0

Page 1 of 3

Service Instructions

2 5

Congratulations on your Full Speed Ahead product. Please read these instructions and follow them for correct use. Since specific tools and experience

3

are necessary for proper installation, it is recommended that the wheelset be

4

installed by a qualified bicycle technician. These instructions and instructions for other FSA products are available for download at http://www.fullspeedahead.com/techdoc Specification

6 Item Number / Model Name WH-XC-150 15mm TA/QR Wheelset Components

Follow the assembly order in the illustration: ① Rear Rim ④ Front Hub Disc Side

1

② Front Rim

⑤ Rear Hub Disc Side

③ Exterior Freehub Body Contact

⑥ Quick Release (QR)

If you have questions, please visit our web site contact page at : http://www.fullspeedahead.com/contact Warranty

Full Speed Ahead (FSA) warrants all FSA, Gravity, Vision and RPM products to be free from defects in materials or workmanship for a period of two years after original purchase unless otherwise stated in the full warranty policy. The warranty is non-transferable and valid to the original purchaser of the product only. Full warranty policy is available at www.fullspeedahead.com Revision Date 13-Jan-09

www.fullspeedahead.com

ZS067-v0

Page 2 of 3

Wheelset installation

1. 2.

Install tires to front ① and rear ② rims. Carefully follow the instructions provided by your tire manufacturer. Lubricate the exterior freehub body ③ with oil or grease before mounting the cassette. Keep a generous amount of grease in the exposed end of the freehub body ③ to protect the drive side outboard bearing. The steel exterior freehub body ③ is compatible with all Shimano-type 8 or 9 speed cassettes, including SRAM, Sun Race, etc.

3.

Install disc brake rotor to front hub disc side ④ and rear hub disc side ⑤. Carefully follow brake manufacturer’s instruction for rotor attachment. Use only the screws provided with the rotor. Caution: Don't ride with inadequately tightened rotor screws. Follow manufacturer’s torque recommendations. Inadequately tightened rotor screws can result in hub thread failure and a potentially dangerous braking situation.

4.

Install the front ① and rear ② wheel to drop-outs of fork and frame. Insert the QR ⑥ to rear wheel from left side. The lever end of the QR requires substantial effort to close. If it closes with only moderate hand pressure, the QR must be readjusted by turning the nut opposite of the release lever clockwise. Orient the lever so that, when closed, it is pointing upward in order to avoid hitting it on passing objects when riding.Caution: Using too much leverage may cause damage to the QR, accident, injury or death. Note: Regularly check quick release adjustment. The QR must be periodically lubricated at pivot points so it can exert maximum sideways force.

5.

For installation of QR15 equipped front wheel, follow the fork manufacturers instructions for proper installation.

6.

Use spoke tension measuring device to follow tension specification: Front disc side: 72kgf-122kgf, Front non-disc side: 42kgf-72kgf, Rear drive side: 72kgf-122kgf, Rear non-drive side: 30kgf-56kgf. Maximum spoke tension must not exceed 122 kgf. Using tension above 122 kgf will void warranty. If tension above 122 kgf is necessary to true the wheel, the rim may be damaged and should be replaced. Caution: Rim failures can cause serious accidents. Use recommended spoke tensions.

Full Speed Ahead, USA 12810 NE 178th St. Suite 102 Woodinville, WA 98072 Tel: 1_425_488_8653 Fax: 1_425_489_1082

Revision Date 13-Jan-09

www.fullspeedahead.com

Full Speed Ahead, Europe Via Del Lavoro, 56 20040 Busnago, Milan, ltaly Tel: +39_039_688_5265 Fax: +39_039_682_3336

ZS067-v0

TH INDUSTRIES / FSA Asia 487 Ko-Chung Rd. Ta-Li City 412 Taichung County, Taiwan Tel: +886_4_2406_8641 Fax: +886_4_2406_8076

Page 3 of 3