CRANE KITS & COMPONENTS SUGGESTED USER PRICES
Phone: 800.888.0985 716.689.5400 Fax: 800.210.9480 716.689.5644 www.cmworks.com
Schedule # YSCKCCPL-0215 Prices effective February 23, 2015 Prices subject to change without notice. All prices are F.O.B. origin.
©2015 Columbus McKinnon Corporation. All Rights Reserved.
CRANE KITS & CRANE COMPONENTS
TABLE OF CONTENTS END TRUCK COMPARISON���������������������������������������������������4 BUDGIT CRANE KITS & COMPONENTS
Underhung & Top Running Push Type Bridge Crane Kits������������ 7 Underhung and Geared Bridge Crane Kits����������������������������������� 8 Top-Running Hand Geared Bridge Crane Kits����������������������������� 9 Underhung Motorized Bridge Crane Kits����������������������������� 10–11 TOP RUNNING Motorized Bridge Crane Kits����������������������������� 12 INDIVIDUAL CRANE COMPONENTS & OPTIONS��������������� 13–15 YALE/SHAW-BOX FIXED AXLE CRANE KITS & COMPONENTS
Fixed Axle Single Girder top-Running For CMAA Class “C”�������� 19–21 Fixed Axle Single Girder Under Running For CMAA Class “C”���� 22–23 Fixed Axle Double Girder For CMAA Class “C”������������������� 25–26 INDIVIDUAL CRANE COMPONENTS & OPTIONS��������������� 28–33 YALE/SHAW-BOX METRIC WHEEL TOP-RUNNING ROTATING AXLE PLUG & PLAY CRANE KITS & COMPONENTS
PLUG & PLAY CRANE KITS������������������������������������������������� 36–37 Rotating Axle Single Girder Crane Kits��������������������������������� 39–42 INDIVIDUAL CRANE COMPONENTS & OPTIONS������������ 43–49 SINGLE GIRDER TOP RUNNING END TRUCKS������������������50-51 DOUBLE GIRDER TOP RUNNING END TRUCKS�����������������52-57 Single Girder Top Running���������������������������������������������������� 58–62 Double Girder Top Running ������������������������������������������������� 63–72 Bridge Components�������������������������������������������������������������� 74–75 Bridge Beam Selection��������������������������������������������������������� 78–88 YALE/SHAW-BOX TOP-RUNNING ROTATING AXLE CRANE KITS & COMPONENTS
9” Rotating Axle End Truck��������������������������������������������������������� 91 12” Rotating Axle End Truck������������������������������������������������������� 92 15” Rotating Axle End Truck������������������������������������������������������� 93 18” Rotating Axle End Truck������������������������������������������������������� 94 INDIVIDUAL CRANE COMPONENTS & OPTIONS������������� 95–100 NOTES������������������������������������������������������������������������������101
3
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
END TRUCK COMPARISON
UNDER-RUNNING
TOP-RUNNING
UNDER-RUNNING
TOP-RUNNING
TOP-RUNNING METRIC WHEEL
TOP-RUNNING TRRA
Single or Double Girder
Single
Single
Single
Single & Double
Single & Double
Single & Double
Axle Type
FIxed Axle
FIxed Axle
Fixed Axle
Fixed Axle
Rotating Axle
Rotating Axle
Determined upon application
Determined upon application
Maximum Capacity
Maximum Bridge Span
5 ton
48 ft. at 3 ton maximum capacity 36 ft. at 5 ton maximum capacity
15 metric tons on Single Girder
5 ton
10 metric tons
48 ft.
60 ft.
Double Girder determined upon application
Determined upon application
Determined upon application
20 metric tons on Double Girder 60 ft. on Single Girder
Type of Trucks Available
Push, Hand Geared, Motorized
Push, Hand Geared, Motorized
Hand Geared, Motorized
Hand Geared, Motorized
Hand Geared, Motorized
Motorized
Power Drive Type Application
Single & Dual Drive
Single & Dual Drive
Dual Drive
Dual Drive
Dual Drive
Dual Drive
Electric
Electric
Electric
Electric
208V thru 575V (3 phase)
208V thru 575V (3 phase)
208V thru 575V (3 phase)
208V thru 575V (3 phase)
Electric
Electric
Air drive package available on single drive only
Air drive package available on single drive only
208V thru 575V (3 phase)
208V thru 575V (3 phase)
115/230-1-60/50 available on single drive, single speed only.
115/230-1-60/50 available on single drive, single speed only.
End Truck Bumpers
Optional
Optional
Standard Equipment
Standard Equipment
Standard Equipment
Standard Equipment
Service Class
CMAA Class C
CMAA Class C
CMAA Class C
CMAA Class C
CMAA Class C & D Rating determined upon application
CMAA Class D
Warranty
1 year
1 year
1 year
1 year
1 year
1 year
Power Application
Electric Power Supplies
4
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & COMPONENTS SECTION CONTENTS:
BUDGIT CRANE KITS & COMPONENTS
CRANE KITS & CRANE COMPONENTS
SPECIFICATIONS
BUDGIT FIXED AXLE UNDER-RUNNING CRANE KITS CAPACITY:
¼ -5 Ton Single Girder
SERVICE CLASS: Meets the duty requirements of CMAA Class C Service OPERATION: Indoor WHEELS: Flat Tread wheels hardened to 300 BHN BUMPERS: Optional Rubber Cylindrical type TRAVERSE GEARING: Right Angle shaft mounted worm drive TRAVERSE BRAKE: Optional disc type TRAVERSE MOTOR: Nema design 30 minute TENV with Class F insulation. CONTROL: 1-Speed, 2-Speed, Variable Frequency BEARINGS: Lifetime Lubricated Ball Bearings
BUDGIT FIXED AXLE TOP-RUNNING CRANE KITS CAPACITY: ¼ -5 Ton Single Girder SERVICE CLASS: Meets the duty requirements of CMAA Class C Service OPERATION: Indoor WHEELS: Flat Tread wheels hardened to 220 BHN BUMPERS: Optional Rubber Cylindrical type TRAVERSE GEARING: Right Angle shaft mounted worm drive TRAVERSE BRAKE: Optional disc type TRAVERSE MOTOR: Nema design 30 minute TENV with Class F insulation. CONTROL: 1-Speed, 2-Speed, Variable Frequency BEARINGS: Lifetime Lubricated Ball Bearings
6
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS UNDERHUNG & TOP RUNNING PUSH TYPE BRIDGE CRANE KITS PUSH TYPE UNDERHUNG Catalog Number
Runway Beam Flange Adjustment Range (in.)
Maximum Span (ft.)
Capacity (tons)
Remarks
Weight (lbs.)
List Price
Angle Construction Trucks 905360
1/2
$1,163
30 Pressed Steel Wheels
905360
3 to 8
300 1
$1,163
24
905360SR
$3,284
Spark Resistant Wheels
905361
Pressed Steel Wheels
310
$1,293
3-3/8 to 8 905362
$1,976
Forged Steel Wheels 2
30
905362PT
3-1/4
Patented Track Wheels
905362SR
3-3/8 to 8
Spark Resistant Wheels
320
$2,500 $4,421
Channel Construction Trucks 905368
3-3/8 to 5-1/2
905368W1
5-1/2 to 8
905368W2
8 to 10-1/2
Forged Steel Wheels 36
380
$2,500
390
$2,748
400
$2,854
3 905368SR
3-3/8 to 5-1/2
$4,897
Spark Resistant Wheels 380
905368PT
3-1/4
905368S
3-3/8 to 5-1/2
905524
4 to 6-1/4
905524W1
6-3/8 to 9
905524W2
9 to 11-1/2
$3,060
Patented Track Wheels 24
3' - 0" Short Wheelbase
Forged Steel Wheels 36
330
$3,490
550
$4,158
560
$4,443
570
$4,570
5 905524PT
3-1/4
$4,941
Patented Track Wheels 550
905524SR
$6,709
Spark Resistant Wheels 4 to 6-1/4
905524S
24
3' - 0" Short Wheelbase
495
$5,149
NOTE: Push Type Kits Consist of: 2 End Trucks - (1 pair)
PUSH TYPE TOP RUNNING* Catalog Number
Capacity (tons)
Maximum Span (ft.)
Remarks
904535
450 $10,541
8" Spark Resistant Wheels
5
904535S
List Price $3,343
8" Ductile Iron Wheels 36
904535SR
Weight (lbs.)
8" Ductile Iron Wheels
24
3' - 0" Short Wheel Base
405
$4,335
End connection kit sold separately #51525050..............$425 list For complete specifications, see Bulletin # CS/L-1003-0206. *Wheels are designed to be run on ASCE rail only, for square bar applications contact factory. NOTE: Push Type Kits Consist of: 2 End Trucks - (1 pair)
7
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS UNDERHUNG AND GEARED BRIDGE CRANE KITS HAND GEARED UNDERHUNG
For Runway Flange Widths of 3-3/8" to 5-1/2" for 3 Max Tons * STANDARD For Runway Flange Widths of 4" to 6-1/4" for 5 Max Tons ** Kit Consists of: Capacity (tons)
Max Span (ft.)
Kit Number
15
B03/15UHG
$3,578
440
1
2
22
B03/22UHG
$3,687
442
905369*
2
2
29
B03/29UHG
$3,860
446
4' - 6" WB
3
3
36
B03/36UHG
$3,969
448
4
3
3
5
List Price
End Truck Catalog Number
Weight (lbs.)
48
B03/48UHG
$5,975
550
15
B05/15UHG
$4,709
520
22
B05/22UHG
$4,818
522
29
B05/29UHG
$4,990
526
36
B05/36UHG
$5,101
528
905380** 6’ - 0” WB
Cross Shaft Support Quantity
6
Catalog Number
905373
Cross Shaft Coupling Quantity
4
1
2
905525**
2
2
4' - 6" WB
3
3
4
3
Catalog Number
905374
SPARK RESISTANT Kit Consists of: Capacity (tons)
3
5
Max Span (ft.)
Kit Number
15
B03/15UHGSR
$5,385
480
1
2
22
B03/22UHGSR
$5,493
482
2
2
29
B03/29UHGSR
$5,666
486
3
3
36
B03/36UHGSR
$5,775
488
4
3
48
B03/48UHGSR
$8,564
550
15
B05/15UHGSR
$7,180
570
22
B05/22UHGSR
$7,290
572
29
B05/29UHGSR
$7,461
576
36
B05/36UHGSR
$7,571
578
List Price
End Truck Catalog Number
Weight (lbs.)
905369SR† 4' - 6" WB
905380SR†† 6’ - 0” WB
905525SR†† 4' - 6" WB
Kit Consists of: 904550 Hand Chain Wheel 8282 Hand Chain 36 Lineal Feet 8282SR Hand Chain 36 Lineal Feet Spark Resistant 2 End Trucks - (1 pair) Cross Shaft Support as noted above Cross Shaft Coupling as noted above
Cross Shaft Support Quantity
6
Catalog Number
905373
Cross Shaft Coupling Quantity
4
1
2
2
2
3
3
4
3
Catalog Number
905374
Components Detailed in Application Guide * For flange widths of 5-1/2" to 8"............................................add $301 * For flange widths of 8" to 10-1/2"..........................................add $385 * For patented track..................................................................add $462 **For flange widths of 6-3/8" to 9"...........................................add $309 **For flange widths of 9" to 11-1/2".........................................add $582 **For patented track.................................................................add $799
Standard kit hand chain is zinc plated, 36' long. Additional hand chain per lineal ft. add $5.25. Spark resistant kit hand chain aluminum, 36' ft. long. Additional spark resistant hand chain per lineal ft. add $11.75. NOTE: Bridge Beam not Included in Kit
†For flange widths of 5-1/2” to 8���������������������������������������������add $301 †For flange widths of 8” to 10-1/2�������������������������������������������add $385 †For patented track�������������������������������������������������������������������������POA ††For flange widths of 6-3/8” to 9�������������������������������������������add $309 ††For flange widths of 9” to 11-1/2�����������������������������������������add $582 ††For patented track�����������������������������������������������������������������������POA
8
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS TOP-RUNNING HAND GEARED BRIDGE CRANE KITS HAND GEARED TOP RUNNING STANDARD Kit Consists of: Capacity (tons)
Max Span (ft.)
Kit Number
15
B05/15TH
$4,472
500
5
List Price
End Truck Catalog Number
Weight (lbs.)
Cross Shaft Support Quantity
2 2
22
B05/22TH
$4,580
515
904536
2
B05/29TH
$4,754
532
4' - 6" WB
3
36
B05/36TH
$4,863
549
48
B05/48TH
$5,735
690
4 904549
Quantity
1
29
6’ - 0” WB
Catalog Number
Cross Shaft Coupling
904540
6
3 3
Catalog Number
905374
4
SPARK RESISTANT Kit Consists of: Capacity (tons)
5
Max Span (ft.)
Kit Number
15
B05/15THSR
$11,042
550
1
2
22
B05/22THSR
$11,183
565
904536SR
2
2
29
B05/29THSR
$11,324
582
4' - 6" WB
3
36
B05/36THSR
$11,433
599
48
B05/48THSR
$11,983
740
List Price
End Truck Catalog Number
Weight (lbs.)
Cross Shaft Support Quantity
4 904549SR 6’ - 0” WB
6
Catalog Number
904540
Cross Shaft Coupling Quantity
3 3
Catalog Number
905374
4
Kit Consists of: 904550 Hand Chain Wheel 2 End Trucks - (1 pair) 36' Hand Chain Cross Shaft Support as noted above 1 Hand Chain Link Cross Shaft Coupling as noted above End connection kit sold separately 51525050 $425 List Standard kit hand chain is zinc plated, 36' long. Additional hand chain per lineal ft. add $5.25 Spark resistant kit hand chain aluminum, 36' ft. long. Additional spark resistant hand chain per lineal ft. add $11.75 Wheels are designed to be run on ASCE rail only, for square bar applications contact factory.
9
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds. (rev. 5/1/14)
CRANE KITS & CRANE COMPONENTS
CRANE KITS UNDERHUNG MOTORIZED BRIDGE CRANE KITS MOTOR DRIVEN WITH SINGLE DRIVE UNDERHUNG FOR RUNWAY FLANGE WIDTH OF 3-3/8" TO 5-1/2" **
Capacity (tons)
Max Span (ft.)
8
15 1/4 through
22
3 29
36
List Price Speed (fpm)
Kit Number
1 Speed
2 Speed
55
B03/08UC*55
$5,121
$5,445
70
B03/08UC*70
$5,121
$5,445
110
B03/08UC*110
$5,121
$5,445
55
B03/15UC*55
$5,230
$5,549
70
B03/15UC*70
$5,230
$5,549
110
B03/15UC*110
$5,230
$5,549
55
B03/22UC*55
$5,338
$5,654
70
B03/22UC*70
$5,338
$5,654
110
B03/22UC*110
$5,338
$5,654
55
B03/29UC*55
$5,513
$5,821
70
B03/29UC*70
$5,513
$5,821
110
B03/29UC*110
$5,513
$5,821
55
B03/36UC*55
$5,621
$5,924
70
B03/36UC*70
$5,621
$5,924
110
B03/36UC*110
$5,621
$5,924
Weight (lbs.)
End Truck Catalog Number
Kit Consists Of: Cross Shaft Support
1 Speed
2 Speed
524
544
0
544
564
1
564
584
586
606
905369 4' - 6" WB
Cross Shaft Coupling
Drive (hp)
2
2
1/2
3 3
606
*Specify: 1=Single Speed 2=Two Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above
626
4
Specify Voltage when ordering - Add $359 to kit price for single phase only Components Detailed in Application Guide **For flange widths of 5-1/2" - 8" add $301 **For flange widths of 8" - 10-1/2" add $385 **For Patented Track add $462
MOTOR DRIVEN WITH SINGLE DRIVE UNDERHUNG FOR RUNWAY FLANGE WIDTH OF 4" TO 6-1/4" ** Capacity (tons)
Max Span (ft.)
8
15
5
22
29
36
List Price Speed (fpm)
Kit Number
1 Speed
2 Speed
50
B05/08UC*50
$6,252
$6,532
65
B05/08UC*65
$6,252
$6,532
100
B05/08UC*100
$6,252
$6,532
50
B05/15UC*50
$6,361
$6,636
65
B05/15UC*65
$6,361
$6,636
100
B05/15UC*100
$6,361
$6,636
50
B05/22UC*50
$6,469
$6,741
65
B05/22UC*65
$6,469
$6,741
100
B05/22UC*100
$6,469
$6,741
50
B05/29UC*50
$6,642
$6,908
65
B05/29UC*65
$6,642
$6,908
100
B05/29UC*100
$6,642
$6,908
50
B05/36UC*50
$6,752
$7,012
65
B05/36UC*65
$6,752
$7,012
100
B05/36UC*100
$6,752
$7,012
Weight (lbs.)
End Truck Catalog Number
Kit Consists Of: Cross Shaft Support
1 Speed
2 Speed
524
544
0
544
564
1
564
584
586
606
905525 4' - 6" WB
Cross Shaft Coupling
Drive (hp)
2
2
1/2
3 3
606
*Specify: 1=Single Speed 2=Two Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 2=Two Speed 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above
626
4
Specify Voltage when ordering - Add $359 to kit price for single phase only Components Detailed in Application Guide **For flange widths of 6-3/8" to 9" add $309 **For flange widths of 9" to 11-1/2" add $582 **For Patented Track add $462
10
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS UNDERHUNG MOTORIZED BRIDGE CRANE KITS MOTOR DRIVEN WITH DUAL DRIVE UNDERHUNG
36' Span Kit - For Runway Flange Width of 3-3/8" to 5-1/2" ** 48' Span Kit for Runway Flange Width 4" to 6¼" †
Capacity (tons)
1/4
Max Span (ft.)
List Price Kit Number
1 Speed
2 Speed
55
B03/36UD*55
$6,153
$6,975
70
B03/36UD*70
$6,153
$6,975
110
B03/36UD*110
$6,153
$6,975
70
B03/48UD*70
$7,832
$8,654
110
B03/48UD*110
$7,832
$8,654
36
through 3
Weight (lbs.)
Speed (fpm)
55 48
1 Speed
2 Speed
545
565
End Truck Catalog Number
905369
Drive (hp)
(2) 1/2
4'-6" WB
NOT AVAILABLE
*Specify: 1=Single Speed 2=Two Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)
645
665
905380
(2) 1/2
6’-0” WB
Specify Voltage when ordering Components Detailed in Application Guide ** For flange widths of 5-1/2" to 8" add $301 ** For flange widths of 8" to 10-1/2" add $385 ** For Patented Track add $462 † For Flange Widths of 6-3/8" to 9" add $309 † For Flange Widths of 9" to 11-1/2" add $582 † For Patented Track add $799
MOTOR DRIVEN WITH DUAL DRIVE UNDERHUNG WITH 4'-6" WB For Runway Flange Width of 4" to 6-1/4" **
Capacity (tons)
Max Span (ft.)
5
36
List Price
Weight (lbs.)
Speed (fpm)
Kit Number
1 Speed
2 Speed
50
B05/36UD*50
$7,282
$8,105
65
B05/36UD*65
$7,282
$8,105
100
B05/36UD*100
$7,282
$8,105
*Specify: 1=Single Speed 2=Two Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)
1 Speed
2 Speed
End Truck Catalog Number
Drive (hp)
665
685
905525
(2) 1/2
Specify Voltage when ordering Components Detailed in Application Guide **For flange widths of 6-3/8" to 9" add $309 **For flange widths of 9" to 11-1/2" add $582 **For Patented Track add $799
CONTROL PANEL OPTIONS To Eliminate Panel and Disconnect Deduct
To Upgrade to NEMA 4 - Add:
1 Speed
2 Speed
-$(1,091)
-($1,350)
$895
11
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS TOP RUNNING MOTORIZED BRIDGE CRANE KITS MOTOR DRIVEN WITH SINGLE DRIVE - TOP RUNNING Capacity (tons)
List Price
Max Span (ft.)
8
15 1/4 through
22
5 29
36
Weight (lbs.)
Speed (fpm)
Kit Number
1 Speed
2 Speed
55
B05/08TC*50
$5,799
$6,351
70
B05/08TC*70
$5,799
$6,351
110
B05/08TC*100
$5,799
$6,351
55
B05/15TC*50
$5,908
$6,459
70
B05/15TC*70
$5,908
$6,459
110
B05/15TC*100
$5,908
$6,459
55
B05/22TC*50
$6,016
$6,570
70
B05/22TC*70
$6,016
$6,570
110
B05/22TC*100
$6,016
$6,570
55
B05/29TC*50
$6,191
$6,741
70
B05/29TC*70
$6,191
$6,741
110
B05/29TC*100
$6,191
$6,741
55
B05/36TC*50
$6,299
$6,850
70
B05/36TC*70
$6,299
$6,850
110
B05/36TC*100
$6,299
$6,850
Kit Consists Of:
End Truck Catalog Number
Cross Shaft Support
1 Speed
2 Speed
529
554
0
544
569
1
559
584
576
601
904536
Cross Shaft Coupling
2
2
4' - 6" WB
Drive (hp)
1/2
3 3
591
*Specify: 1=Single Speed 2=Two Speed Kit Consists of: 2 End Trucks - (1 pair) 1 Reducer 1 Motor 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1) Cross Shaft Support as noted above Cross Shaft Coupling as noted above
616
4
End connection kit sold separately 51525050 $425 List Specify Voltage when ordering - Add $359 to kit price for single phase only (Not available in dual drive) Components Detailed in Application Guide Wheels are designed to be run on ASCE rail only, square bar applications are available upon request. Square bar requirements; width 40mm maximum (1-1/2" maximum), height 40 mm minimum (1-1/2" minimum).
MOTOR DRIVEN WITH DUAL DRIVE - TOP RUNNING Capacity (tons)
1/4
Max Span (ft)
List Price Kit Number
1 Speed
2 Speed
55
B05/36TD*50
$6,831
$7,662
70
B05/36TD*70
$6,831
$7,662
100
B05/36TD*100
$6,831
$7,662
70
B05/48TD*70
$7,826
$8,752
100
B05/48TD*100
$7,826
$8,752
36
through 5
Weight (lbs.)
Speed (fpm)
55 48
1 Speed
2 Speed
575
615
End Truck Catalog Number
904536
Drive (hp)
(2) 1/2
4'-6" WB
Not Available
*Specify: 1=Single Speed 2=Two Speed Kit Consists of: 2 End Trucks - (1 pair) 2 Reducers 2 Motors 1 Control Panel (NEMA 1) 1 Disconnect (NEMA 1)
675
904549
715
(2) 3/4
6'-0" WB
End connection kit sold separately 51525050 $425 List Specify Voltage when ordering Components Detailed in Application Guide Wheelbase exceeding 54" - line shaft drive applicable on 36' span and below only
CONTROL PANEL OPTIONS To Eliminate Panel and Disconnect Deduct
To Upgrade to NEMA 4 - Add:
1 Speed
2 Speed
-$(1,091)
-$(1,350)
$895
12
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds. (rev. 3/19/14)
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS UNDERHUNG Catalog Number
Runway Wt. Remarks List Price Beam Flange (lbs.) Underhung End Trucks (1 pair) - 3 Ton Capacity
905369 905369W1 905369W2 905369PT 905369SR 905369SRW1 905369SRW2 905369S 905369SW1 905369SPT 905369SSR 905380 905380W1 905380W2 905380PT 905380SR 905380W1SR 905380W2SR
3-3/8" to 5-1/2" Standard - 3 ton 5-1/2" to 8" Wider Flange 8" to 10-1/2" Wider Flange 3-1/4" Patented Track 3-3/8" to 5-1/2" Spark Resistant 5-1/2" to 8" Spark Resistant 8" to 10-1/2" Spark Resistant 3-3/8" to 5-1/2" 3'-0" Short Wheelbase 5-1/2" to 8" 3'-0" Short Wheelbase 3-1/4" 3'-0" Short Wheelbase, Patented Track 3-3/8" to 5-1/2" 3'-0" Short Wheelbase, Spark Resistant 4" to 6-1/4" 6'-0" Wheelbase 6-3/8" to 9" Wider Flange 9" to 11-1/2" Wider Flange 3-1/4" Patented Track 4" to 6-1/4" Spark Resistant 6-3/8" to 9" Spark Resistant 9" to 11-1/2" Spark Resistant
440 450 460 440 440 450 460 390 400 390 390 540 550 560 540 540 550 560
$2,890 $3,191 $3,275 $3,352 $4,701 $5,002 $5,086 $3,748 $4,049 $4,211 $5,559 $4,658 $4,967 $5,240 $5,457 $7,150 $7,459 $7,732
560 570 580 560 560 570 580 505 515 525
$4,081 $4,390 $4,663 $4,880 $6,454 $6,763 $7,036 $5,103 $5,412 $5,685
Bridge Brakes 904554
4" to 6-1/4" 6-3/8" to 9" 9" to 11-1/2" 3-1/4" 4" to 6-1/4" 6-3/8" to 9" 9" to 11-1/2" 4" to 6-1/4" 6-3/8" to 9" 9" to 11-1/2"
Catalog Number
Standard- 5 ton Wider Flange Wider Flange Patented Track Spark Resistant Spark Resistant Spark Resistant 3'-0" Short Wheelbase 3'-0" Short Wheelbase 3'-0" Short Wheelbase
Weight (lbs.)
Description
440
$5,163
905525SRPT
5 Ton Geared
560
$12,329
Catalog Number
Cross Shaft Coupling
2
$67
905373 904550 8282 8282SR
Cross Shaft Support Hand Chain Wheel for Budgit Trucks Hand Chain 36 lineal feet Hand Chain 36 lineal ft. Spark Resistant
20 10 18 16
$115 $434 $195 $422
Catalog Number
Traverse Speed 3 ton
5 ton
110 fpm GR - 10:1
100 fpm GR - 10:1
905377
70 fpm GR - 15:1
65 fpm GR - 15:1
55 fpm GR - 20:1
50 fpm GR - 20:1
905378
Electrical and Control Options
$241
Horse Power
.5 HP-1800 RPM
32879526
208-230/460-3-60
25
575 - 3 - 60
25
230/460-3-60
32879626
230 - 3 - 60
32879627
32879722
Catalog Number
.75 HP Max 208-230 - 3 - 60
.5 HP
115/230 - 1 - 60
1800 RPM
Single Speed or Two Speed 2 HP Max 208-230-3-60
30
$658
Weight List Price (lbs.)
Description
Control Panels - Single Speed - (3 ph Underhung) 460v - 3 ph - 60 Hz - 905386
20
44600314
575v - 3 ph - 60 Hz - 905387
20
44600311
208-230v - 3 ph - 60 Hz (1 hp) - I.D.
50
$799
Control Panels - Single Phase - (1 ph Underhung) 44600305
115v - 1 ph - 60 Hz - 905364
44600315
230v - 1 ph - 60 Hz - 905365
20
$859
Control Panels - Two Speed - (3 ph Underhung) 44600343
460v - 3 ph - 60 Hz - 905398
25
44600344
575v - 3 ph - 60 Hz - 905399
25
44600351
208-230v - 3 ph - 60 Hz (1 hp) - I.D.
50
$1,072
Fused Disconnect Switch - Standard 905388
208-230v - 3 ph - 60 Hz
905389
460-575v - 3 ph - 60 Hz
10
$241 $349
Fused Disconnect Switch - Single Phase 905366
115v - 1 ph - 60 Hz
905367
230v - 1 ph - 60 Hz
Weatherproofing (add for each enclosure)
$894 (each)
NEMA 4/12
Watertight and dust-tight for indoor and outdoor service
NEMA 7 or 9
Apply to factory
932000
Rubber Bumpers - Underhung
51526501
Includes air motor, gear reducer, control head with pendant throttle and hose assembly with 8 ft. hose drop. Traverse speed approx. 70 fpm. Requires catalog 902967 filter- regulator-lubricator mounted near air motor. For additional pendant hose over 8’'- 0" Add per foot
$809
13
$285
Weight List Price (lbs.) 20
$408
—
—
20
$93
Weight List Price (lbs.)
Air Motor Drive Package
$542
10
Weight List Price (lbs.)
Bridge Bumpers
2 HP Max 460 - 3 - 60 913186
$621
575 - 3 - 60
44600313
2 HP Max 460 - 3 - 60 904598
$432
Motors - Single Phase - single motor - single speed only
$424
10
45
460 - 3 - 60
Single Speed
Two Speed
$325
200-208-3-60
1800/600 RPM
$1,267
.75 HP Max 208-230 - 3 - 60
30
575 - 3 - 60
.5/.17 HP
32879625
Electronic Acceleration Control (EAC) — 115 volt control 904596
Weight List Price (lbs.)
Motor - Two Speed - slow speed is one third of listed speed 32879624
$811
NEMA 4 Travel Limit Switch (Trip Dogs by Others)
Power Supply
.25 HP 900 RPM
328795-27
List Price
Warning Horn
25
Motor - Half-Speed Single Speed (provides traverse speed 50% of that listed)
Weight List Price (lbs.)
20
Std.
Thermal overload relays (3 phase) in enclosure
32879533
Gear Reducers 905376
—
TOL
Motor - Single Speed
Drive Components 905374
$542 (each)
Temperature Actuated Switch in Motor Winding
32879532
Weight List Price (lbs.)
Description
15
575 - 3 - 60
TAS
Catalog Number
Patented Track, Spark Resistant Underhung End Trucks - (1 pair) 3 Ton Geared
230/460 - 3-60
Motor Protection
List Price
905369SRPT
Adjustable Brake
904556
Underhung End Trucks (1 pair) - 5 Ton Capacity 905525 905525W1 905525W2 905525PT 905525SR 905525SRW1 905525SRW2 905525S 905525SW1 905525SW2
120/240 - 1 - 60
3 ft. lb.
904555
$4,325 115 $11.30
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS TOP RUNNING Catalog Number
Description
Weight List Price (lbs.)
Catalog Number
Horse Power
Top Running End Trucks - (1 pair) Standard
450
$3,604
32879532
904536SR
Spark Resistant Wheels
450
$10,519
32879533
904536S
3' - 0" Short Wheelbase
395
$4,463
32879542
904549
6' - 0" Wheelbase
550
$4,179
32879543
904549SR
Spark Resistant Wheels
550
$10,772
Cross Shaft Support
20
$115
905374
Cross Shaft Coupling
2
$67
904550
Hand Chain Wheel
10
$434
8282
Hand Chain
18
$195
32879624
8282SR
Spark Resistant Hand Chain
16
$422
32879625
Traverse Speed 70 fpm GR - 15:1 Traverse Speed 50 fpm GR - 20:1
$894 (each)
Single Speed $424
2 HP Max 460 - 3 - 60 Two Speed .75 HP Max 208-230 - 3 - 60
10
913186
$809
2 HP Max 208-230-3-60
Ballast Resistors (single drive only) 905391
SS and 2S 208-230 - 3 - 60
905392
SS and 2S 460 - 3 - 60
905393
SS and 2S 575 - 3 - 60
10
$384
30
$432
200-208-3-60 460 - 3 - 60
45
$621
575 - 3 - 60
.5 HP
115/230 - 1 - 60
1800 RPM
30
$658
Weight List Price (lbs.)
Description
44600326
208-230v - 3 ph - 60 Hz - 904541
44600383
460v - 3 ph - 60 Hz - 904542
44600384
575v - 3 ph - 60 Hz - 904543
44600329
208-230v - 3 ph - 60 Hz - 3/4 hp motor
44600327
460v - 3 ph - 60 Hz - 3/4 hp motor
44600328
575v - 3 ph - 60 Hz - 3/4 hp motor
$799 20 $868
Control Panel - Two Speed (3 ph Top-Run)
$542
2 HP Max 460 - 3 - 60 Single Speed or Two Speed
25
Control Panel -Single Speed (3 ph Top-Run)
$1,267
Electronic Acceleration Control (EAC) — 115 volt control
904598
575 - 3 - 60
1800/600 RPM
Catalog Number
$811
.75 HP Max 208-230 - 3 - 60
$325
Motors - Single Phase - single motor - single speed only
List Price
NEMA 4 Travel Limit Switch (Trip Dogs by Others)
208-230/460-3-60
230 - 3 - 60
32879722
Electrical and Control Options
575-3-60
.5/.17 HP
32879627 20
208/230/460-3-60
25
Motor - Two Speed - slow speed is one third of listed speed
32879626
Warning Horn
904596
.25 HP 900 RPM
32879527
Gear Reducers
905378
575 - 3 - 60
.75 HP-1800 RPM
32879526
904540
Traverse Speed 100 fpm GR - 10:1
208-230/460-3-60
.5 HP-1800 RPM
Motors - Half-Speed Single Speed (provides traverse speed 50% of that listed)
Drive Components
905377
Weight List Price (lbs.)
Motor - Single Speed
904536
905376
Power Supply
44600336
208-230v - 3 ph - 60 Hz - 904546
44600393
460v - 3 ph - 60 Hz - 904547
44600394
575v - 3 ph - 60 Hz - 904548
44600339
208-230v - 3 ph - 60 Hz - 3/4 hp motor
44600337
460v - 3 ph - 60 Hz - 3/4 hp motor
44600338
575v - 3 ph - 60 Hz - 3/4 hp motor
$1,084 25 $1,151
Control Panel - Single Phase Single Speed (1 ph Top-Run)
$355
44600305
115v - 1 ph - 60 Hz - 904544
44600315
230v - 1 ph - 60 Hz - 904545
20
$859
Bridge Brakes 904554 904555 904556
120/240 - 1 - 60
3 ft. lb. Adjustable Brake
230/460 - 3-60
15
575 - 3 - 60
Fused Disconnect Switch - Standard
$542 (each)
Motor Protection Temperature Actuated Switch in Motor Winding
—
Std.
TOL
Thermal overload relays (3 phase) in enclosure
25
$241
51526501
Includes air motor, gear reducer, control head with pendant throttle and hose assembly with 8 ft. hose drop. Traverse speed approx. 70 fpm. Requires catalog 902967 filter- regulator-lubricator mounted near air motor. For additional pendant hose over 8’- 0” Add per foot
208-230v - 3 ph - 60 Hz
905389
460-575v - 3 ph - 60 Hz
10
$241 $349
Fused Disconnect Switch - Single Phase
TAS
Air Motor Drive Package
905388
905366
115v - 1 ph - 60 Hz
905367
230v - 1 ph - 60 Hz
Weatherproofing (add for each enclosure)
Wt. List Price (lbs) $4,325
Wt. List Price (lbs)
Watertight and dust-tight for indoor and outdoor service
20
$408
NEMA 7 or 9
Apply to factory
—
—
Wt. List Price (lbs)
Bridge Bumpers 932000
14
$285
NEMA 4/12
115 $11.30
10
Rubber Bumpers - Underhung
20
$93
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS NEMA 4/12 CONTROL PANELS
ONE & TWO SPEED NEMA 4/12 PANELS WITH BUILT IN DISCONNECT (Standard NEMA1 Panels & Disconnects are on pages 34 & 45) For Bridge Traverse Motions Price Includes; Feature: NEMA 4/12 Panel Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle Fuses Hinge Point
1 h.p. 20 X 16 X 8.8" 30 Amp** 115V/75VA 30 Amp** Yes Horizontal at bottom of panel List Prices For: 1 - Speed Panels
Maximum Total H.P.
1
Maximum Total H.P. 1
230 volts
Catalog Number
460 volts
Catalog Number
575 volts
Catalog Number
Weight (lbs.)
$1,741
44423121
$1,741
44423141
$1,741
44423151
75
2 - Speed Panels 230 volts
Catalog No.
460 volts
Catalog No.
575 volts
Catalog No.
Weight (lbs.)
$1,805
44423221
$1,805
44423241
$1,805
44423251
85
** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications.
VARIABLE FREQUENCY NEMA 4/12 PANEL WITH BUILT IN DISCONNECT For Bridge Traverse Motions Speed range up to 20:1 (in F.P.M.) Price Includes; Feature: Magnetek CMAA Service Class NEMA 4/12 Panel Control Steps Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle External Dynamic Braking Resistor Fuses Hinge Point
1 h.p. G+ Mini C 20 X 16 X 8.5 2-step or 3-step infinitely variable 30 Amp 75VA 30 Amp Yes Yes Horizontal at bottom of panel
Power Supply
Maximum Total H.P.
Maximum Full Load Amps
230 Volts
1
460 Volts
1
230 Volts
2
8.0
460 Volts
2
3.4
Weight (lbs.)
Catalog Number
List Price
5.0
45231121
$2,790
3.4
45231142
$2,906
45231122
$3,017
45231142
$2,906
50
Not available in 575 volt Consult factory for ¾ hp dual drive end trucks
15
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & COMPONENTS SECTION CONTENTS:
YALE/SHAW-BOX FIXED AXLE CRANE KITS & COMPONENTS
CRANE KITS & CRANE COMPONENTS
SPECIFICATIONS
YALE/SHAW-BOX FIXED AXLE UNDER-RUNNING CRANE KITS CAPACITY: ½ -10 Ton Single Girder SERVICE CLASS Meets the duty requirements of CMAA Class C Service OPERATION Indoor WHEELS Flat Tread wheels hardened to 320 BHN BUMPERS Rubber Conical type TRAVERSE GEARING Spur, heat-treated alloy steel TRAVERSE BRAKE 50% torque, AC disc type TRAVERSE MOTOR Nema design 30 minute TENV with Class F insulation. CONTROL 1-Speed, 2-Speed, Variable Frequency BEARINGS Antifriction type throughout
YALE/SHAW-BOX FIXED AXLE TOP-RUNNING CRANE KITS CAPACITY ½ -15 Ton Single Girder SERVICE CLASS Meets the duty requirements of CMAA Class C Service OPERATION Indoor WHEELS Flat Tread wheels hardened to 400 – 450 BHN BUMPERS Rubber Conical type TRAVERSE GEARING Spur, heat-treated alloy steel TRAVERSE BRAKE 50% torque, AC disc type TRAVERSE MOTOR Nema design 30 minute TENV with Class F insulation. CONTROL 1-Speed, 2-Speed, Variable Frequency BEARINGS Antifriction type throughout
17
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SPECIAL INFORMATION This section contains typical single girder top and underhung crane component packages for the most popular span and capacity combinations. Individual components are offered at the end of this catalog. KIT NUMBERING SYSTEM Pricing and ordering quality Yale® Shaw-Box® Components to build a Single Girder Crane has just been made easier. The kit numbering system is designed to insure that you get the correct combinations of features and components required to build your crane. You also have the ability to add options to the kits or purchase specific individual components. EXAMPLE: 05 /48TD*100N
05 /48
T
D
*
100
N
A
C
D
E
F
G
B
A = Maximum Capacity in U.S. tons B = Maximum Span in feet C = Type of Crane • T = Top-Running
• U = Under-Running
D = Type of Drive
• D = Dual, A-4
• H = Hand-Geared
E = Speed Points of Control. You fill in. 1 or 2 speed, or V for Variable Frequency, not required for Hand-Geared. F = Maximum Bridge Speed in F.P.M. G = Panel enclosure
• N = NEMA 4/12
Specify Power Supply with order.
18
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE SINGLE GIRDER TOP-RUNNING FOR CMAA CLASS "C" DUAL (A-4) DRIVE - NEW STYLE TRUCKS FOR US (SHORT) TONS KIT PRICING WITH NEMA 4/12 PANEL WITH DISCONNECT Max. Capacity (tons)
Max. Span (ft.)
Max. Travel Speed (fpm)
36
5
48
60
36
7½
48
60
LIST PRICE WITH CONTROL
KIT CONSISTS OF:
Kit Number
1-Speed
2-Speed
†Variable Frequency
Shipping Weight
Wheel Diameter
Wheel Base
Drive H.P.
50
05/36TD*50N
$8,200
$8,618
$9,388
75
05/36TD*75N
$8,200
$8,618
$9,388
100
05/36TD*100N
$8,200
$8,618
$9,388
125
05/36TD*125N
N/A
$8,724
$9,434
150
05/36TD*150N
N/A
$8,724
$9,434
50
05/48TD*50N
$8,348
$8,766
$9,536
75
05/48TD*75N
$8,348
$8,766
$9,536
100
05/48TD*100N
$8,395
$8,872
$9,582
125
05/48TD*125N
N/A
$8,872
$9,582
150
05/48TD*150N
N/A
$8,983
$9,629
50
05/60TD*50N
$8,556
$8,974
$9,744
75
05/60TD*75N
$8,556
$8,974
$9,744
100
05/60TD*100N
$8,603
$9,080
$9,790
125
05/60TD*125N
N/A
$9,190
$9,836
150
05/60TD*150N
N/A
$9,190
$9,836
50
7.5/36TD*50N
$8,200
$8,618
$9,388
75
7.5/36TD*75N
$8,246
$8,724
$9,434
100
7.5/36TD*100N
$8,293
$8,834
$9,480
1123
125
7.5/36TD*125N
N/A
$9,984
$9,815
1133
150
7.5/36TD*150N
N/A
$10,233
$9,937
1153
2
50
7.5/48TD*50N
$8,395
$8,872
$9,582
1199
3/4
1219
1/2 1103
4' - 6" 3/4 1/2
1199
6' - 0"
1219
1 1/2
1297 6 1317 1103
3/4
7' - 6"
1
for use with
1/2
25-40# Rail
3/4
3/4 4' - 6"
1 1-1/2
75
7.5/48TD*75N
$8,441
$8,983
$9,629
100
7.5/48TD*100N
$8,776
$10,132
$9,963
125
7.5/48TD*125N
N/A
$10,132
$9,963
150
7.5/48TD*150N
N/A
$10,381
$10,086
1249
2
50
7.5/60TD*50N
$8,603
$9,080
$9,790
1297
3/4
1229
75
7.5/60TD*75N
$8,649
$9,190
$9,836
1317
100
7.5/60TD*100N
$8,984
$10,340
$10,171
1327
125
7.5/60TD*125N
N/A
$10,589
$10,294
150
7.5/60TD*150N
N/A
$10,589
$10,294
1 6' - 0"
1-1/2
1 7' - 6"
1347
1-1/2 2
* Specify: 1 = Single Speed 2 = Two Speed V = Variable Frequency
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Kit Consists of: 2 End Trucks with bumpers & rail sweeps 1 Control panel with disconnect 2 Drives, each with brake motor & pinion End connections are optional
Note: 125 & 150 fpm kits are available only in two speed control with soft start or variable frequency control.
Specify Voltage When Ordering – Components detailed in application guide.
Two speed control at 50 fpm is a 2:1 ratio. All other traverse speeds have a 3:1 ratio. † L ist prices are based on 230/460/3/60 power. For 575 volt applications - See Fixed Axle Options Section. Add for wheel bases in-between cataloged wheel bases in 6" increments - add $93 per 6"
19
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE SINGLE GIRDER TOP-RUNNING FOR CMAA CLASS "C" DUAL (A-4) DRIVE - NEW STYLE TRUCKS FOR US (SHORT) TONS KIT PRICING WITH NEMA 4/12 PANEL WITH DISCONNECT Max. Capacity (tons)
Max. Span (ft.)
1-Speed
2-Speed
†Variable Frequency
50
10/36TD*50N
$9,779
$10,197
$10,967
75
10/36TD*75N
$9,826
$10,303
$11,013
100
10/36TD*100N
$9,872
$10,413
$11,059
125
10/36TD*125N
N/A
$11,563
$11,394
150
10/36TD*150N
N/A
$11,812
$11,517
1206
50
10/48TD*50N
$10,057
$10,535
$11,245
1379
75
10/48TD*75N
$10,104
$10,645
$11,291
100
10/48TD*100N
$10,438
$11,794
$11,626
125
10/48TD*125N
N/A
$11,794
$11,626
150
10/48TD*150N
N/A
$12,044
$11,748
1434
50
10/60TD*50N
$10,289
$10,766
$11,476
1507
75
10/60TD*75N
$10,335
$10,877
$11,523
100
10/60TD*100N
$10,670
$12,026
$11,857
125
10/60TD*125N
N/A
$12,275
$11,980
150
10/60TD*150N
N/A
$12,275
$11,980
50
15/36TD*50N
$12,288
$12,766
$13,476
75
15/36TD*75N
$12,669
$14,025
$13,857
100
15/36TD*100N
$12,669
$14,025
$13,857
48
60
36
15
KIT CONSISTS OF:
Kit Number
36
10
LIST PRICE WITH CONTROL
Max. Travel Speed (fpm)
48
60
Shipping Weight
1399
$13,979
1497
$14,294
1537
50
15/48TD*50N
$12,547
$13,088
$13,734
75
15/48TD*75N
$12,882
$14,238
$14,069
100
15/48TD*100N
$13,004
$14,487
$14,191
125
15/48TD*125N
N/A
$14,738
$14,506
150
15/48TD*150N
N/A
$14,738
$14,506
50
15/60TD*50N
$12,755
$13,296
$13,942 $14,277 $14,399
125
15/60TD*125N
N/A
$14,945
$14,714
150
15/60TD*150N
N/A
$14,945
$14,714
or
1 1/2 2
60-80#
3/4
Rail
1 7' - 6"
1477
$14,275
$14,695
30-40#
1 6' - 0"
1 1/2
3/4
$14,525
$14,446
for use
1457
N/A
$13,212
2 3/4
2
N/A
$13,089
8
with
1 1 1/2
1547
15/36TD*150N
15/60TD*75N
3/4 4' - 6"
1527
15/36TD*125N
15/60TD*100N
Drive H.P. 1/2
1271
125
75
Wheel Base
1251
150
100
Wheel Diameter
1605 1625 1665
4' - 6"
2 3 1
10
1 1/2 for use
6' - 0"
with
2 3
60-80# Rail
1
1733 1753
1 1/2
1 1/2 7' - 6"
1793
2 3
* Specify: 1 = Single Speed 2 = Two Speed V = Variable Frequency
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Kit Consists of: 2 End Trucks with bumpers & rail sweeps 1 Control panel with disconnect 2 Drives, each with brake motor & pinion End connections are optional
Note:... 125 & 150 fpm kits are available only in two speed control with soft start or variable frequency control.
Specify Voltage When Ordering – Components detailed in application guide.
..... Two speed control at 50 fpm is a 2:1 ratio. All other traverse speeds have a 3:1 ratio.
† L ist prices are based on 230/460/3/60 power. For 575 volt applications - See Fixed Axle Options Section. Add for wheel bases in-between cataloged wheel bases in 6" increments - add $93 per 6"
20
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE SINGLE GIRDER TOP-RUNNING FOR CMAA CLASS "C" HAND GEARED Max. Capacity (tonnes)
1/2 thru 5
6 thru 7½
8 thru 10
11 thru 15
Max. Span (ft)
Kit Number
List Price*
Shipping Weight (lbs)
Wheel Diameter
12
05/12TR
$4,848
853
22
05/22TR
$4,969
856
28
05/28TR
$5,212
862
36
05/36TR
$5,337
865
42
05/42TR
$5,705
967
48
05/48/TR
$5,825
970
52
05/52TR
$6,004
1158
60
05/60TR
$6,125
1161
12
7.5/12TR
$4,848
943
with
22
7.5/22TR
$4,969
946
25-40#
28
7.5/28TR
$5,212
952
Rail
36
7.5/36TR
$5,337
955
42
7.5/42TR
$5,705
1057
48
7.5/48TR
$5,825
1060
52
7.5/52TR
$6,004
1058
60
7.5/60TR
$6,125
1061
12
10/12TR
$6,183
1091
22
10/22TR
$6,306
1094
28
10/28TR
$6,551
1100
36
10/36TR
$6,670
1103
with
Wheel Base
4' - 6"
6 for use
6' - 0" 7' - 6"
4' - 6"
6' - 0" 7' - 6" 8 for use
42
10/42TR
$7,110
1237
25-40#
48
10/48/TR
$7,234
1240
or
52
10/52TR
$7,428
1368
60-80#
60
10/60TR
$7,551
1371
Rail
12
15/12TR
$8,267
1297
22
15/22TR
$8,389
1300
28
15/28TR
$8,632
1306
36
15/36TR
$8,757
1309
42
15/42TR
$9,177
1443
with
48
15/48/TR
$9,300
1446
60-80#
52
15/52TR
$9,478
1574
Rail
60
15/60TR
$9,598
1577
10
4' - 6"
6' - 0" 7' - 6"
4' - 6"
for use 6' - 0" 7' - 6"
Kit Consists of: (1) Pair of End Trucks (1) 8282 Hand Chain with Open Link (36 ft.) (1) 229984-1 Hand Geared Drive Adapter Kit Cross Shaft Bearing Assemblies & Cross Shaft Coupling (1) 913115 Hand Chain & Wheel Guide Assembly (see chart below for quantities)
Max Span (ft)
Cross Shaft** Bearing Assy Qty.
12
1
22
2
28
3
36
4
42
5
48
6
52
7
60
8
Catalog No.
Cross Shaft** Coupling Qty.
Catalog No.
2 3 904625
8280 4
**Note: List price based on using a 1-3/16" diameter cross shaft (by others). Add for wheel bases in-between cataloged wheel bases in 6" increments - add $93 per 6"
21
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE SINGLE GIRDER UNDER-RUNNING FOR CMAA CLASS "C" DUAL (A-4) DRIVE - NEW STYLE TRUCKS FOR US (SHORT) TONS KIT PRICING WITH NEMA 4/12 PANEL WITH DISCONNECT Max. Capacity (tons)
Max. Span (ft)
Max. Travel Speed (fpm)
36
1-Speed
2-Speed
†Variable Frequency
65
05/36UD*65N
$10,303
$10,721
$11,491
95
05/36UD*95N
$10,303
$10,721
$11,491
115
05/36UD*115N
N/A
$10,827
$11,537
135
05/36UD*135N
N/A
$10,827
$11,537
05/48UD*65N
$11,302
$11,720
$12,490
05/48UD*95N
$11,302
$11,720
$12,490
05/48UD*115N
N/A
$11,826
$12,536
05/48UD*135N
N/A
$11,826
$12,536
65
05/60UD*65N
$11,872
$12,290
$13,059
95
05/60UD*95N
$11,918
$12,396
$13,106
115
05/60UD*115N
N/A
$12,506
$13,152
135
05/60UD*135N
N/A
$12,506
$13,152
65
10/36UD*65N
$12,292
$12,770
$13,480
95
10/36UD*95N
$12,338
$12,880
$13,526
115
10/36UD*115N
N/A
$14,029
$13,861
135
10/36UD*135N
N/A
$14,029
$13,861
10/48UD*65N
$13,365
$13,843
$14,553
10/48UD*95N
$13,412
$13,953
$14,599
10/48UD*115N
N/A
$15,103
$14,934
10/48UD*135N
N/A
$15,103
$14,934
65
10/60UD*65N
$13,638
$14,115
95
10/60UD*95N
$13,684
$14,226
115
10/60UD*115N
N/A
$15,375
$15,207
135
10/60UD*135N
N/A
$15,375
$15,207
115 135
60
36
65 10
4-5/8" - 6"
95
48
1-1/16" max flange thickness*
5-1/2" - 6"
95
48
115 135
60
LIST PRICE WITH CONTROL Kit Number
65 5
Beam Flange Range**
1-1/4" max flange thickness*
* Specify: 1 = Single Speed 2 = Two Speed V = Variable Frequency
Description
For 6½” & 8” Trucks
For 3¼" Patented Track
Shipping Weight
Wheel Diameter
Wheel Base
1235
Drive H.P. 1/2
4' - 6" 1245
3/4
1345
1/2 6-1/2
6' - 0"
1365
3/4 1/2
1475 7' - 6" 1505
3/4 1 3/4
1615 4' - 6" 1635
1 1 1/2 3/4
1761 8
6' - 0"
1
1781
1 1/2
$14,826
1903
3/4
$14,872
1923
7' - 6"
1983
1 1 1/2
Specify Voltage When Ordering – Components detailed in application guide. Note: 115 fpm and 135 fpm kits are available only in two speed control with soft-start or variable frequency control.
Kit Consists of: 2 End Trucks with bumpers & rail sweeps 1 Control panel with disconnect 2 Drives, each with brake motor & pinion Bumpers are optional - For thicker runway flange applications - contact factory
**Add for Wider Beams
KIT CONSISTS OF:
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp. † L ist prices are based on 230/460/3/60 power. For 575 volt applications - See Fixed Axle Options Section. Add for wheel bases in-between cataloged wheel bases in 6" increments - add $160 per 6"
Price
For 6-1/8" - 7½"
$82 Add to the kit price
For 7-5/8" - 9"
$299
For 9-1/8” - 10½”
$411
For 10-5/8" - 12"
$475
(6-1/2" wheel only)
$999
22
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE SINGLE GIRDER UNDER-RUNNING FOR CMAA CLASS "C" HAND GEARED Max. Capacity (tonnes)
Max. Span (ft)
Runway Beam Range Kit Number
List Price***
Shipping Weight (lbs)
05/12UH/*
$6,890
1175
05/22UH/*
$7,018
1178
05/28UH/*
$7,271
1184
05/36UH/*
$7,398
1187
05/42UH/*
$8,155
1313
05/48UH/*
$8,283
1316
05/52UH/*
$8,615
1436
60
05/60UH/*
$8,742
1439
12
10/12UH/*
$8,994
1565
22
10/22UH/*
$9,123
1568
10/28UH/*
$9,376
1574
10/36UH/*
$9,501
1577
10/42UH/*
$10,305
1729
10/48UH/*
$10,431
1732
52
10/52UH/*
$10,671
1874
60
10/60UH/*
$10,800
1877
Min. Depth (in)
Width (in)
12 22
1/2 thru
28
thru
36
6
42
5
48 52
28 6
4-5/8
10** 1-1/16" max flange thickness*
5-1/2" - 6"
36
thru
42
10
48
14**
1-1/4" max flange thickness*
* Specify: 1 = Single Speed 2 = Two Speed V = Variable Frequency
Cross Shaft** Bearing Assy Qty.
12
1
22
2
28
3
36
4
42
5
48
6
52
7
60
8
Wheel Base
4' - 6"
6-1/2" 6' - 0"
7' - 6"
4' - 6"
8" 6' - 0"
7' - 6"
Specify Voltage When Ordering – Components detailed in application guide. Note: 115 fpm and 135 fpm kits are available only in two speed control with soft-start or variable frequency control.
Kit Consists of: (1) Pair of End Trucks (1) 229984-1 Hand Geared Drive Adapter Kit (1) 913115 Hand Chain & Wheel Guide Assembly (1) 8282 Hand Chain with Open Link (36 ft.) Cross Shaft Bearing Assemblies & Cross Shaft Coupling (see chart below for quantities)
Max Span (ft)
Wheel Diameter
Catalog No.
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp. † L ist prices are based on 230/460/3/60 power. For 575 volt applications - See Fixed Axle Options Section. Add for wheel bases in-between cataloged wheel bases in 6” increments - add $160 per 6”
*IDENTIFY FLANGE WIDTH AND ADDER
Cross Shaft** Coupling Qty.
Code No.
Catalog No.
2 3 904625
8280 4
Flange Width
Add
1
=
4-5/8 - 6
$0
2
=
6-1/8 - 7-1/2
$56
3
=
7-5/8 - 9
$199
4
=
9-1/8 - 10-1/2
$279
5
=
10-5/8 - 12
$315
6
=
Patented track ( 6½" wheel only)
$831
*Note: List price based on using a 1-3/16" diameter cross shaft (by others).
For thicker runway flange applications - contact factory
Add for wheel bases in-between cataloged wheel bases in 6" increments - add $160 per 6"
**Please see page 12 in the Crane Components Specification Catalog for calculating more precise minimum beam depths.
23
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SPECIAL INFORMATION This section contains double girder component packages for various span and capacity combinations and individual component pricing. Individual bridge components are found near the end of this catalog. KIT NUMBERING SYSTEM Pricing and ordering quality Yale®® Shaw-Box® Components to build a Double Girder Top Running Crane has just been made easier. The value package kit numbering system is designed to insure that you get the correct combinations of features and components required to build your crane. You also have the ability to add options to the kits or purchase specific individual components. EXAMPLE:
8
F
7.5 / .75 - 1 - *
A B
C D E F
A = Wheel diameter in inches B = Type of wheel • F = Fixed Axle • R = Rotating Axle C = Wheelbase in feet D = H.P. of each drive motor E = Speed points of control (you fill in). 1-speed, 2-speed, V-Variable Frequency F = Traverse Speed Specify Power Supply with order.
24
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE DOUBLE GIRDER FOR CMAA CLASS "C" BASED ON INDIVIDUAL (A-4) DRIVES SINGLE SPEED PACKAGES (DO NOT USE FOR SPEEDS OVER 100 F.P.M.) Wheel Diameter (in)
List Prices Motor**H.P.
Package Price
Control Deduct
Weight (lbs)
9'
10' - 6"
3/4
$10,289
$1,774
1387
686
784
1
$10,335
$1,774
1407
686
784
1-1/2
$10,670
$1,774
1407
686
784
8F7.5/2.0-1-*
2
$10,792
$1,774
1427
686
784
8F7.5/3.0-1-*
3
$10,911
$1,774
1467
686
784
10F7.5/1.0-1-*
1
$12,755
$1,774
1613
714
807
10F7.5/1.5-1-*
1-1/2
$13,089
$1,774
1613
714
807
2
$13,212
$1,774
1633
714
807
3
$13,330
$1,774
1673
714
807
Kit Number
Wheel Base
Wheel Base Adder
8F7.5/.75-1-* 8F7.5/1.0-1-* 8F7.5/1.5-1-*
10F7.5/2.0-1-*
8
10
7' - 6"
7' - 6"
10F7.5/3.0-1-*
TWO SPEED PACKAGES (USE WITH E.A.C. FOR SPEEDS OVER 100 F.P.M.) LIST PRICES Wheel Diameter (in)
Motor** H.P.
Package Price
Control Deduct
Weight (lbs)
9'
10' - 6'
8F7.5/.75-2-*
3/4
$10,766
$1,839
1407
686
784
8F7.5/1.0-2-*
1
$10,877
$1,840
1427
686
784
1-1/2
$12,026
$1,840
1427
686
784
8F7.5/2.0-2-*
2
$12,275
$1,840
1447
686
784
Kit Number
8F7.5/1.5-2-*
8
Wheel Base
Wheel Base Adder
7' - 6"
8F7.5/3.0-2-*
3
$12,526
$1,840
1487
686
784
10F7.5/1.0-2-*
1
$13,296
$1,840
1633
714
807
10F7.5/1.5-2-*
1-1/2
$14,446
$1,840
1633
714
807
2
$14,695
$1,840
1653
714
807
3
$14,945
$1,840
1693
714
807
10F7.5/2.0-2-*
10
7' - 6"
10F7.5/3.0-2-*
* Specify: 1 = Single Speed 2 = Two Speed V = Variable Frequency
* Specify: Traverse Speed Rail Size
Kit Consists of: 2 End Trucks with Bumpers 1 NEMA 4/12 Control Panel with disconnect
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Specify Voltage When Ordering Note: Drives are shipped assembled but not mounted to the trucks. Add 5% to weights for approximate shipping weights.
Drives, each with: Motor, AC Disc Brake, Reducer, Drive Pinion
** When selecting bridge motor hp shown on this page, motors are sized based on 66% of the total calculated hp required for contactor or variable frequency drive (VFD) control. However, if the reverse plugging feature of the VFD is to be used, motors should be sized to 75% of the total calculated hp required to get full reverse plugging performance.
25
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS FIXED AXLE DOUBLE GIRDER FOR CMAA CLASS "C" BASED ON INDIVIDUAL (A-4) DRIVES (CONT.) † VARIABLE FREQUENCY DRIVE PACKAGES (2 STEP INFINITELY VARIABLE BASED ON 460 VOLTS LIST PRICES Wheel Diameter (in)
Motor** H.P.
Package Price
Control Deduct
Weight (lbs)
9'
10' - 6'
8F7.5/.75-V-*
3/4
$11,476
$2,962
1367
686
784
8F7.5/1.0-V-*
1
$11,523
$2,961
1387
686
784
Kit Number
Wheel Base
Wheel Base Adder
1-1/2
$11,857
$2,961
1387
686
784
8F7.5/2.0-V-*
2
$11,980
$2,961
1407
686
784
8F7.5/3.0-V-*
3
$12,294
$3,158
1407
686
784
10F7.5/1.0-V-*
1
$13,942
$2,961
1593
714
807
10F7.5/1.5-V-*
1-1/2
$14,277
$2,961
1593
714
807
2
$14,399
$2,961
1613
714
807
3
$14,714
$3,158
1613
714
807
8F7.5/1.5-V-*
10F7.5/2.0-V-*
8
10
7' - 6"
7' - 6"
10F7.5/3.0-V-* * Specify: 1 = Single Speed 2 = Two Speed V = Variable Frequency
* Specify: Traverse Speed Rail Size
Kit Consists of: 2 End Trucks with Bumpers 1 NEMA 4/12 Control Panel with disconnect
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Specify Voltage When Ordering Note: Drives are shipped assembled but not mounted to the trucks. Add 5% to weights for approximate shipping weights.
Drives, each with: Motor, AC Disc Brake, Reducer, Drive Pinion
** When selecting bridge motor hp shown on this page, motors are sized based on 66% of the total calculated hp required for contactor or variable frequency drive (VFD) control. However, if the reverse plugging feature of the VFD is to be used, motors should be sized to 75% of the total calculated hp required to get full reverse plugging performance. †For 575 volt applications - See Fixed Axle Options Section.
26
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SPECIAL INFORMATION This section contains individual double girder crane components for fixed and rotating axle end trucks. Price for the following components are found in this section: End Trucks Drive Reducers Motors and Brake Control Panels NEW FIXED AXLE, TOP RUNNING TUBE-FRAME END TRUCK CATALOG NUMBERING SYSTEM The following end truck catalog numbering system makes ordering a pair of end trucks for a specific application easier and insures that you will receive exactly what you ordered. Example - Typical Single Girder Truck Catalog Number as Cataloged - Less Options EXAMPLE: TRFA6072AR2
TRFA6
072
A
R2
A
B
C
D
A
Truck Type & Wheel Diameter TRFA6 Top-running, fixed axle - 6" diameter wheel TRFA8 Top-running, fixed axle - 8" diameter wheel TRFA10 Top-running, fixed axle - 10" diameter wheel
B Wheelbase - Inches C Runway Rail Size A 30# - 40# ASCE B 60# - 105# ASCE D Bumper Type* *To insure proper bumper selection check pages 51-54 in the Yale® Shaw-Box® Crane Components Specification Book #CS/L-1002-0505.
27
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS TOP RUNNING SINGLE GIRDER FIXED AXLE END TRUCKS
DRIVES
1 PAIR WITH CONICAL BUMPERS AND WELDED RAIL SWEEPS Catalog Number
Max. Cap. (tons)
Wheel Base
TRFA6054AR2 TRFA6072AR2
4'-6" 7.5*
6'-0"
TRFA6090AR2
7'-6"
TRFA8054AR3
4'-6"
TRFA8072AR3
6'-0"
TRFA8090AR3
7'-6"
TRFA8054BR3
10
4'-6"
TRFA8072BR3
6'-0"
TRFA8090BR3
7'-6"
TRFA10054BR3 TRFA10072BR3
4'-6" 15
6'-0"
TRFA10090BR3
7'-6"
A.S.C.E. Rail 25 - 40# (6" wheel) 30 - 40# (8" wheel) 60 - 80# (8" wheel) 60 - 80# (10" wheel)
FOR TOP-RUNNING OR UNDER-RUNNING TRUCKS 2-Speed - For use with 2-speed contactor controls 1 pair with brake, motor, reducer & pinion - For either 230/460 or 575 volts - SPECIFY speed and voltage with order.
List Price
Wt. (lbs)
$3,536
744
$3,684
840
Catalog Number
H.P.
List Price
Wt. (lbs)
$3,892
938
913470
1/2
$3,243
174
$5,115
892
913471
3/4
$3,349
174
$5,347
1020
$5,578
1148
913472
1
$3,459
194
$5,115
892
913473
1-1/2
$4,609
194
$5,347
1020
913474
2
$4,858
214
$5,578
1148
913475
3
$5,108
214
$7,578
1098
$7,790
1226
$7,998
1354
Note: Two speed drives over 100 fpm must have solid state soft starts included with the controls.
"WHALES TAIL" END CONNECTION (FOR TOP-RUNNING ONLY)
DOUBLE GIRDER FIXED AXLE END TRUCKS 1 PAIR WITH CONICAL BUMPERS AND RAIL SWEEPS Catalog Number
Wheel Dia.
Wheel Base
List Price
Wt. (lbs)
$5,578
1148
444697-10, 275 lbs.
$6,160
1276
When purchasing with components��������������������������������������������������������������������������������� $862
10'-6"
$6,274
1404
When purchasing end connections only��������������������������������������������������������������������������� $943
7'-6"
$5,578
1148
$6,160
1276
$6,274
1404
$7,998
1354
$8,535
1482
10'-6"
$8,655
1610
The adapter contains a drive pinion mounted on a bearing supported stub shaft. The adapter bolts into the same threaded bolt hole arrangement that the gear reducer bolts into. The live shaft (by others) couples to the stub shaft.
7'-6"
$7,998
1354
229984-1 1 pair of adapters����������������������������������������������������������������������������������������� $843
$8,535
1482
$8,655
1610
Following are component options for the trucks that can be used to fabricate hand geared bridge cranes.
TRFA8090AR3
7'-6"
TRFA8108AR3
9'-0"
TRFA8126AR3 TRFA8090BR3
8"
TRFA8108BR3
9'-0"
TRFA8126BR3
10'-6"
TRFA10090AR4
7'-6"
TRFA10108AR4
9'-0"
TRFA10126AR4 TRFA10090BR4
10"
TRFA10108BR4
9'-0"
TRFA10126BR4
10'-6"
A.S.C.E. Rail
Following kit consists of two end connections for a single girder crane. Can be used for either a welded or bolted connection. To 60 foot maximum span.
30 - 40#
60 - 80#
30 - 40#
60 - 80#
*2 kits required for double girder applications.
HAND GEARED OPTIONS
HAND GEARED DRIVE ADAPTER KIT
Add for wheel bases in-between cataloged wheel bases in 6" increments....................$93
Catalog Number
FOR TOP-RUNNING OR UNDER-RUNNING TRUCKS 1-Speed - For use with 1-speed contactor or variable frequency control. 1 pair with brake, motor, reducer & pinion - For either 230/460 or 575 volts SPECIFY speed and voltage with order.
913460
Wt. (lbs)
Cross Shaft Bearing
DRIVES
Catalog Number
List Price
904625
(1-3/16 Dia.)
$114
3
912112
(1-5/16 Dia.)
$176
5
Cross Shaft Coupling 8280
(1-3/16 Dia.)
912122
(1-5/16 Dia.)
(1-3/16 Bore)
H.P.
List Price
Wt. (lbs)
1/2
$2,890
164
913115
913462
3/4
$2,937
164
332189-3 (1-3/16 Bore)
913464
1
$2,983
184
912116
(1-5/16 Bore)
913466
1-1/2
$3,318
184
913468
2
$3,440
204
913469
3
$3,559
204
8282
(36'-0" LG)
$113
3 6
Hand Chain Wheel and Guide $337
10
$230
20
$4.40
—
Hand Chain with Link Additional Hand Chain
Note: Do not use 1-speed drives on traverse speeds over 100 fpm.
Per Linear Foot
28
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS UNDER-RUNNING END TRUCKS
1 PAIR WITH RAIL SWEEPS, BUMPERS OPTIONAL
Catalog Number
Max Flange Thickness
Max. Cap. (tons)
CENTER END TRUCK Wheel Wheel Dia. Base
Flange Width
446350-01
4-5/8-6"
$5,639
446350-02
6-1/8-7-1/2"
$5,709
994
UNDERHUNG END TRUCK SPACER KITS*
446350-03
7-5/8-9"
$5,876
1010
9-1/8-10-1/2"
$5,967
1028
10-5/8-12"
$6,013
1044
End truck spacer kits permit modification of the end truck to run on a different runway beam flange width range. End trucks can be modified to run on larger or smaller flange width ranges by removing the spacers shipped with the truck and replacing with different spacers.
Patented Track
$6,638
950
446350-06
4-5/8-6"
$6,213
1096
446350-07
6-1/8-7-1/2"
$6,291
1114
446350-08
7-5/8-9"
$6,464
1130
9-1/8-10-1/2"
$6,575
1148
10-5/8-12"
$6,615
1164
4'-6"
446350-04 446350-05
976
3-1/4"
446350-43
446350-09
Wt. (lbs)
UNDER-RUNNING TRUCKS ONLY
List Price
1-1/16"
5
6-1/2"
6'-0"
446350-10
Patented Track
446350-11
4-5/8-6"
$7,208 $6,590
Prices are per truck, order two kits for one pair of trucks. The spacer kits consist of two steel spacer blocks, they do not include pinion shafts or pinions. Catalog Number
Runway Beam Flange Width
List Price
Wt. (lbs)
232556-01
4-5/8" to 6"
$340
60
232556-02
6-1/8" to 7-1/2"
$361
70
1050
232556-03*
7-5/8" to 9"
$422
80
1216
232556-04*
9-1/8" to 10-1/2"
$423
90
232556-05*
10-5/8" to 12"
$437
100
3-1/4"
446350-44
Price for one Center Truck����������������� Use 60% of List Price for std. End Truck
446350-12
6-1/8-7-1/2"
$6,662
1234
446350-13
7-5/8-9"
$6,852
1250
9-1/8-10-1/2"
$6,955
1268
10-5/8-12"
$7,006
1284
Patented Track
$7,582
1175
5-1/2-6"
$8,031
1366
6-1/8-7-1/2"
$8,105
1384
7-5/8-9"
$8,304
1404
446353-04
9-1/8-10-1/2"
$8,418
1422
446353-05
10-5/8-12"
$8,469
1440
446353-06
5-1/2-6"
$8,655
1512
6-1/8-7-1/2"
$8,736
1530
7-5/8-9"
$8,953
1550
446353-09
9-1/8-10-1/2"
$9,066
1560
446353-10
10-5/8-12"
$9,122
1586
446353-11
5-1/2-6"
$8,927
1654
6-1/8-7-1/2"
$9,010
1672
7-5/8-9"
$9,226
1692
446353-14
9-1/8-10-1/2"
$9,337
1710
8” TD trucks to fit 5” wide flange��������������������������������������������������������$1,009
446353-15
10-5/8-12"
$9,393
1728
8” TD trucks only- 12-1/8” to 13” wide����������������������������������������������$2,773
7'-6"
446350-14 446350-15
3-1/4"
446350-45 446353-01 446353-02 446353-03
4'-6"
446353-07 446353-08
1-1/14"
10
8"
6'-0"
446353-12 446353-13
7'-6"
UNDERHUNG BRIDGE BUMPER KITS (SHIPPED LOOSE)
*UNDERHUNG END TRUCK PINION KITS In addition to different spacer blocks, you must order longer or shorter pinion shafts. Following are pinion kits to use depending on if you are going up or down in flange width range. For trucks with a flange width range of 4-5/8" - 7-1/2" pinion kit No. 232557-01 is required, 13-13/16" pinion, one kit per truck. Price for one Pinion kit No. 232557-01��������������������������������������������������$334 For trucks with a flange width range of 7-5/8" and up, pinion kit No. 232557-02 is required, 17-5/8" pinion, one kit per truck. Price for one Pinion kit No. 232557-02��������������������������������������������������$368
6-1/2” TD trucks to fit 4” or 4.5” patented track Use same price as 3-1/4” track
8” TD trucks to fit 4.5” patented track������������������������������������������������$1,460
Spark Resistant Features – See Options Page
NOTE: 2 KITS REQUIRED FOR EACH PAIR OF END TRUCKS (8 BUMPERS TOTAL) Bridge Bumpers
List Price
232553-01
6½” Wheel Dia. Truck - Includes 4 bumpers total
$71
232553-02
8” Wheel Dia. Truck - Includes 4 bumpers total
$92
Add for wheel bases in-between cataloged wheel bases in 6" increments�������������� $160 4' - 0" Wheel base Under-Running Trucks Add per pair of 4-6" end trucks�������������� $741
29
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS UNDER-RUNNING FIXED AXLE Description
List Price
Description
NEMA 4 Brake
List Price
Thermal Overload Relays $215
(For outdoor applications)
Adjustable EAC (115 Volt Control)
$690 $1,503
Fiberglass Stainless Steel
$853
Warning Horn
Variable Frequency Drive 575/3/60 Volt Price Adder to standard 460 VFD Panels
$431
(must specify method of activation)
Warning Light Travel Limit Switch Single Switch, Bi-Directional (Trip Dog by others) $859 $1,313
NEMA 4/12 Intrinsically safe (Hazardous area)
$4,835 $4,835 $4,835 $4,835 $4,611
3/4 Maximum Motor HP 1 Maximum Motor HP ½ Maximum Motor HP 2 Maximum Motor HP 3 Maximum Motor HP
$718
(must specify method of activation)
$684 $1,521 $684 $1,521
208/230 Volt, 1-2 HP 208/230 Volt, 3-6 HP 460 Volt, 1-4 HP 460 Volt, 5-10 HP
Strip Heater Package (Non Hazardous areas only) Includes: Heaters in both motors & control panel with transformer
$230 $398
Single Speed 2-Speed
NEMA 4X Enclosure Adders
Disconnect Panel Adders: $258 $336
60 Amp Panel 100 Amp Panel
EXPLOSION PROOF/SPARK RESISTANT OPTIONS Description
List Price $12.40
Aluminum Hand Chain (per foot of drop)
SPARK RESISTANT BRONZE WHEELS (PRICE PER PAIR OF TRUCKS) Description
List Price
Top-Running $5,241
6" Bronze Wheels with Rail Sweeps
$6,067
8" Bronze Wheels
$11,584
with Rail Sweeps
$12,511
10" Bronze Wheels
$17,026 $18,428
with Rail Sweeps
Under-Running 6½" Bronze Wheels (max. WLL: 6,500 lbs. per pair)
$5,388
with Rail Sweeps
$6,075
8" Bronze Wheels (max. WLL: 12,700 lbs. per pair)
$7,390
with Rail Sweeps
$8,652
*EXPLOSION PROOF MOTOR/CONTROL** - ADD TO STANDARD FIXED AXLE KITS IN THIS CATALOG Division 1 Class 1, Group C & D Class 2, Group F & G
Division 2 Class 1, Group C & D
Class 2, Group F & G
1-Speed
2-Speed
Drive HP
1-Speed
2-Speed
Drive HP
1-Speed
2-Speed
$12,261
$14,476
1/2
$5,078
$6,584
1/2
$1,491
$2,230
$12,261
$14,476
3/4
$5,078
$6,584
3/4
$1,491
$2,230
$12,261
$14,476
1
$5,078
$6,584
1
$1,491
$2,230
$13,795
$14,492
1-1/2
$6,539
$6,602
1-1/2
$1,491
$2,230
$13,795
$14,492
2
$6,539
$6,602
2
$1,491
$2,230
$13,795
$14,492
3
$6,539
$6,602
3
$1,491
$2,230
* Includes Intrinsically Safe Control Circuit, except Class 2 Group F & G, Division 2 **For VFD Controls - Contact Factory
30
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS 1 AND 2 SPEED BRIDGE CONTROL PANELS
NEMA 4/12 PANEL WITH BUILT IN DISCONNECT Without Soft-Start For Bridge Traverse Motions Price Includes; Feature: NEMA 4/12 Panel Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle Fuses Soft-Start Hinge Point
1-3 h.p. 20 W X 16 H X 8.8" D* 30 Amp** 115V/75VA 30 Amp** Yes No Horizontal at bottom of panel
5-10 h.p. 24 W X 20 H X 10.8" D 60 Amp** 115V/100VA 60 Amp** Yes No Horizontal at bottom of panel
*Adding a 60 amp disconnect increases enclosure size to the 5-10 hp panel. Do not use single speed control for speeds over 100 F.P.M. Two speed control over 100 F.P.M. requires an electronic acceleration control.
For Maximum Total H.P.
Single Speed Catalog Number
List Price
1
444231-21
$1,774
2
444231-22
$1,774
3
444231-23
$1,774
Voltage
230
444231-25
$2,094
7.5
444231-27
$2,418
10
444231-29
$2,418
1
444231-41
$1,774
2
444231-42
$1,774
3
444231-43
$1,774
5
460
444231-45
$2,095
7.5
444231-47
$2,418
10
444231-49
$2,418
1
444231-51
$1,774
2
444231-52
$1,774
3
444231-53
$1,774
5
575
444231-55
$2,095
7.5
444231-57
$2,418
10
444231-59
$2,418
5
Two Speed Weight (lbs) 75
115
75
115
75
115
Catalog Number
List Price
444232-21
$1,840
444232-22
$1,840
444232-23
$1,840
444232-25
$2,212
444232-27
$2,594
444232-29
$2,594
444232-41
$1,840
444232-42
$1,840
444232-43
$1,840
444232-45
$2,213
444232-47
$2,594
444232-49
$2,594
444232-51
$1,840
444232-52
$1,840
444232-53
$1,840
444232-55
$2,213
444232-57
$2,594
444232-59
$2,594
Weight (lbs) 85
125
85
125
85
125
** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications. Note: Panel has room for addition of field installed soft-start. Reference components sections for prices. Note: For approximate shipping weights add 10%
31
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS 1 AND 2 SPEED BRIDGE CONTROL PANELS
NEMA 4/12 PANEL WITH BUILT IN DISCONNECT With Soft-Start Built In For Bridge Traverse Motions Price Includes; Feature: NEMA 4/12 Panel Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle Fuses Soft-Start Hinge Point
1-3 h.p. 20 W X 16 H X 8.8" D* 30 Amp** 115V/75VA 30 Amp** Yes Yes Horizontal at bottom of panel
5-10 h.p. 24 W X 20 H X 10.8"D 60 Amp** 115V/100VA 60 Amp** Yes Yes Horizontal at bottom of panel
*Adding a 60 amp disconnect increases enclosure size to the 5-10 hp panel. Do not use single speed control for speeds over 100 F.P.M. Two speed control over 100 F.P.M. requires an electronic acceleration control.
Single Speed For Maximum Total H.P.
Catalog Number
List Price
1
444711-21
$2,460
2
444711-22
$2,460
444711-23 444711-25
7.5
—
—
10
—
—
1
444711-41
$2,182
2
444711-42
$2,460
444711-43
$3,295
3 5
3
Voltage
230
460
Catalog Number
List Price
444712-21
$2,521
444712-22
$2,521
$3,614
444712-23
$3,732
$3,614
444712-25
$3,732
444711-45
$3,614
7.5
444711-47
$3,939
10
444711-49
$3,939
5
Two Speed Weight (lbs) 85
125
—
Weight (lbs) 95
135
— 85
125
444712-41
$2,353
444712-42
$2,521
444712-43
$3,362
444712-45
$3,732
444712-47
$4,025
444712-49
$4,025
95
135
** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications. Note: Panel has room for addition of field installed soft-start. Reference components sections for prices.
32
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS VARIABLE FREQUENCY BRIDGE CONTROL PANELS
NEMA 4/12 PANEL WITH BUILT IN DISCONNECT For Bridge Traverse Motions Speed range up to 20:1 (in F.P.M.) Price Includes; Feature: Electromotive Drive Type Control only CMAA Service Class NEMA 4/12 Panel Control Points
1-3 h.p. G+ Mini D 20 W X 16 H X 8.5 D* 2-step, 3-step or 2-step & 3-step infinitely variable 30 Amp 115V / 75VA 30 Amp Yes Yes
Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle External Dynamic Braking Resistor Fuses Hinge Point
5-10 h.p. G+ Mini D 24 W X 20 H X 10.5 D 2-step, 3-step & 5-step or 2-step & 3-step infinitely variable 60 Amp* 115V / 75VA 60 Amp Yes Yes Horizontal at bottom of panel
Includes: AC Brake Relay (12 amp), Surge Suppression on Coil and Space Terminal Board (10 terminals)
Max. Total H.P.
** Max. Full Load Amps
List Price
Catalog Number
1
5.0
$2,845
448550-21
2
8.0
$3,077
448550-22
11.0
$3,214
448550-23
17.5
$3,921
448550-25
7½
25.0
$4,586
448550-27
10
33.0
$5,019
448550-29
Power Supply
*** Wt. (lbs)
Power Supply
** Max. Full Load Amps
List Price
Catalog Number
3.4
$2,961
448550-41
3.4
$2,961
448550-42
4.8
$3,158
448550-43
8.6
$4,003
448550-45
14.8
$4,838
448550-47
18.0
$5,366
448550-49
*** Wt. (lbs) 80
3 5
200 to 230 Volts 50/60 Hz
80 380 to 460 Volts 50/60 Hz
105 105
* 3 hp panel for 460 volts is 24 W X 20 H X 10.5 D. *Adding a 60 amp disconnect increases enclosure size to the 5-10 hp panel. ** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications. *** Add 15% for approximate shipping weight. † For 575 volt applications - See Fixed Axle Options Section.
33
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & COMPONENTS SECTION CONTENTS:
YALE/SHAW-BOX METRIC WHEEL TOP-RUNNING ROTATING AXLE PLUG & PLAY CRANE KITS & COMPONENTS
CRANE KITS & CRANE COMPONENTS
SPECIFICATIONS
YALE/SHAW-BOX METRIC WHEEL TOP-RUNNING ROTATING AXLE PLUG & PLAY CRANE KITS & COMPONENTS
CAPACITY: 1-15 Ton Single Girder 5-20 Ton Double Girder SERVICE CLASS: Meets the duty requirements of CMAA Class C Service as standard. CMAA Class D Service qualified upon application OPERATION: Indoor WHEELS: Flat Tread wheels hardened to 300 - 350 BHN BUMPERS:
Rubber Cylindrical type
TRAVERSE GEARING: Helical, heat-treated alloy steel, totally enclosed operating in an oil bath TRAVERSE BRAKE: Minimum 50% torque, disc type, DC rectified, IP55 enclosure TRAVERSE MOTOR: S-3 rated with Class F insulation. Single speed, IP55 enclosure CONTROL:
Variable frequency type.
BEARINGS:
Antifriction type throughout
35
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
PLUG & PLAY CRANE KITS
FLEX-48 QUICK SHIP PRICE SCHEDULE PLUG & PLAY SINGLE GIRDER TOP RUNNING CRANE KITS HOIST Hoist Catalog Number
TROLLEY
Lifting No. Motor Wheel Capacity Lift Motor (hp) Speed Speed Ropes / (hp) Qty-Dia. (tons) (ft.) RPM (fpm) (fpm) Dia. RPM (in.)
BRIDGE
Flange Range
TOTAL
Max End Trucks Wheel Bridge Output Net Bridge Drive Power Control Span Wheel Dia. Base Traverse (RPM) Weight Control hp Supply Voltage (ft.) (mm) (in.) (fpm) Motor (lbs.)
List Price
K0550S25044GX
5
25
20/5
7.5/1.875 3600/900
4 – 9 mm
55/18
.5/.17 1800/600
4–4
8-1/8 to 14
50
160
90
100
VFD
1
84.1
460-3-60
115V
2306
$19,929
K0560S25044G
5
25
20/5
7.5/1.875 3600/900
4 – 9 mm
55/18
.5/.17 1800/600
4–4
8-1/8 to 14
60
160
90
100
VFD
1
84.1
460-3-60
115V
2460
$20,181
K1050S25044G
10
25
20/5
15/3.75 3600/900
4 – 12 mm 50/17
.75/.25 1800/600
4–6
8-1/8 to 14
50
200
90
100
VFD
1.5
72.8
460-3-60
115V
3370
$26,823
K1050S25044GX
10
25
20/5
15/3.75 3600/900
4 – 12 mm 50/17
.75/.25 1800/600
4–6
8-1/8 to 14
50
200
96
100
VFD
1.5
72.8
460-3-60
115V
3370
$26,901
IMPORTANT: WHEN ORDERING... Step 1: Pick a Catalog Number Just a single catalog number for a standard monorail unit or a complete plug & play crane kit. Step 2: Pick a Product Brand Kit Number Choose your brand with a factory-installed product brand kit for either the Global King or World Series.
PRODUCT BRAND KITS 5 METRIC TON & 5 TON UNITS
10 METRIC TON & 10 TON UNITS
Shaw-Box Product Brand Kit #: 23563825
Shaw-Box Product Brand Kit #: 23563845
Yale Product Brand Kit #: 23563826
Yale Product Brand Kit #: 23563846
IMPORTANT INFORMATION: All prices are F.O.B. Wadesboro, NC 28170. Specifications, prices and deliveries are subject to change without notice. Suggested list prices are furnished as trade information only and not as a restriction on resale pricing. Please note that end trucks furnished with Quick Ship Crane Kits are suitable for operation on 25# through 40# ASCE rail only. For other rail sizes please contact our Sales Department for quotation.
OPTIONAL Upper Block Operated Control Circuit Limit Switch is available as a field installation kit for all units.
Catalog Number: 23564022C
List Price: $325
36
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
PLUG & PLAY CRANE KITS
CANADIAN 24 HOUR QUICK SHIP PRICE SCHEDULE PLUG & PLAY SINGLE GIRDER TOP RUNNING CRANE KITS ALL STANDARD CANADIAN 24 HOUR QUICK SHIP PLUG & PLAY CRANE KITS ARE FURNISHED AS FOLLOWS: • With Trolley Brake included
• Nema 4X Pendant Assembly included
• Trolley Drop Stops with Rubber Bumpers included
• Mainline Contactor included HOIST
Catalog Number
Pendant Lifting Capacity Lift Length Speed (tons) (ft.) (ft) (fpm)
TROLLEY Motor (hp) RPM
BRIDGE
No. Motor Wheel Speed Flange Ropes / (hp) Qty-Dia. (fpm) Range Dia. RPM (in.)
K0350S20045G
3
20
17
20/5
5.0/1.25 3600/900
4-6.4 mm
K0550S25044G
5
25
22
20/5
7.5/1.875 .5/.17 4-9 mm 55/18 3600/900 1800/600
K0550S250458G
5
25
22
20/5
K0550S25045G
5
25
22
K0560S25045G
5
25
K1050S25044GV
10
K1050S25045G
K1060S25045G
Max End Trucks Wheel Bridge Output Net Bridge Drive Power Control Span Wheel Dia. Base Traverse (RPM) Weight Control hp Supply Voltage (ft.) (mm) (in.) (fpm) Motor (lbs.)
4-5/8 to 8-1/2
50
115
75
100
VFD
.75
4-4
8-1/8 to 14
50
160
75
100
VFD
7.5/1.875 .5/.17 4-9 mm 55/18 3600/900 1800/600
4-4
4-5/8 to 8
50
160
75
100
20/5
7.5/1.875 .5/.17 4-9 mm 55/18 3600/900 1800/600
4-4
8-1/8 to 14
50
160
75
22
20/5
7.5/1.875 .5/.17 4-9 mm 55/18 3600/900 1800/600
4-4
8-1/8 to 14
60
160
25
22
20/5
15/3.75 .75/.25 4-12 mm 50/17 3600/900 1800/600
4-6
8-1/8 to 14
50
10
25
22
20/5
15/3.75 .75/.25 4-12 mm 50/17 3600/900 1800/600
4-6
8-1/8 to 14
10
25
22
20/5
15/3.75 .75/.25 4-12 mm 50/17 3600/900 1800/600
4-6
8-1/8 to 14
50/17
.5/.17 4-3.75 1800/600
TOTAL List Price
122.4 575-3-60 115V
1654
$20,170
1
84.1
460-3-60 115V
2306
$20,348
VFD
1
84.1
575-3-60 115V
2306
$21,371
100
VFD
1
84.1
575-3-60 115V
2306
$21,371
90
100
VFD
1
84.1
575-3-60 115V
2306
$21,623
200
90
100
VFD
1.5
72.8
460-3-60 115V
3370
$27,354
50
200
90
100
VFD
1.5
72.8
575-3-60 115V
3370
$28,482
60
200
90
100
VFD
1.5
72.8
575-3-60 115V
3370
$28,755
IMPORTANT INFORMATION: All prices are in U.S. Dollars. All prices are F.O.B. Cobourg, Ontario K9A 4W5. Specifications, prices and deliveries are subject to change without notice. Suggested list prices are furnished as trade information only and not as a restriction on resale pricing. Please note that end trucks furnished with Quick Ship Crane Kits are suitable for operation on 25# through 40# ASCE rail only. For other rail sizes please contact our Sales Department for quotation.
Optional Upper Block Operated Control Circuit Limit Switch is available as a field installation kit for all units Catalog Number
Capacity
List Price
23564001C
3 ton 3 metric ton
$325
23564022C
5 thru 10 ton 5 metric ton thru 10 metric ton
$325
37
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SPECIAL INFORMATION This section contains typical single girder top running crane component packages for the most popular span and capacity combinations. Individual components are offered at the end of this catalog. ROTATING AXLE SINGLE & DOUBLE GIRDERCRANE KIT NUMBERING SYSTEM Pricing and ordering quality Yale•Shaw-Box Components to build a Single or Double Girder Crane has just been made easier. The kit numbering system is designed to insure that you get the correct combinations of features and components required to build your crane. You also have the ability to add options to the kits or purchase specific individual components. Example below is for a 5 ton capacity, top-running single girder crane with a 25' lift Yale Global King Hoist.
K 05 40 S 100 25 014 3 G A B C D E F G H J A = K for Crane Kits
F = Max Lift • 20 • 25 • 40
B = Maximum Capacity in U.S. tons • 01 • 02 • 03 • 05 • 07 • 10 • 15 • 20
G = Max Flange Width or Gage in inches H = Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
C = Maximum Span in Feet (up to 60') D = Type of Crane • S = Top-Running Single Girder • D = Top-Running Double Girder
J = Hoist Brand • W = World Series • G = Global King
E = Bridge Speed • 100 fpm • 125 fpm • 150 fpm
38
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
PLUG & PLAY CRANE KITS ROTATING AXLE SINGLE GIRDER CRANE KITS FOR US (SHORT) TONS
“PLUG & PLAY” SINGLE GIRDER TOP-RUNNING CRANE KIT BASED ON 40# RUNWAY RAIL AND A BRIDGE SPEED OF **100 FPM For other bridge speeds or rail sizes use the estimating software or contact the Customer Service Department. Changes in speed or rail size may change equipment selection. For lift requirements greater than listed please contact the Customer Service Department. Single Girder Kits with Global/World Series Wire Rope Hoist & Trolley Max Cap (tons)
2
3
5
7.5
Bridge
Max. Span ft.)
Lift
Kit Catalog Number
Selected Girder
10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60
20 20 20 20 20 20 40 40 40 40 40 40 20 20 20 20 20 20 40 40 40 40 40 40 25 25 25 25 25 25 40 40 40 40 40 40 25 25 25 25 25 25 40 40 40 40 40 40
K0210S10020008*† K0220S10020008*† K0230S10020008*† K0240S10020014*† K0250S10020014*† K0260S10020014*† K0210S10040008*† K0220S10040008*† K0230S10040008*† K0240S10040014*† K0250S10040014*† K0260S10040014*† K0310S10020008*† K0320S10020008*† K0330S10020008*† K0340S10020014*† K0350S10020014*† K0360S10020014*† K0310S10040008*† K0320S10040008*† K0330S10040008*† K0340S10040014*† K0350S10040014*† K0360S10040014*† K0510S10025008*† K0520S10025008*† K0530S10025014*† K0540S10025014*† K0550S10025014*† K0560S10025014*† K0510S10040008*† K0520S10040008*† K0530S10040014*† K0540S10040014*† K0550S10040014*† K0560S10040014*† K0710S10025008*† K0720S10025008*† K0730S10025014*† K0740S10025014*† K0750S10025014*† K0760S10025020*† K0710S10040008*† K0720S10040008*† K0730S10040014*† K0740S10040014*† K0750S10040014*† K0760S10040020*†
W10 x 30 W10 x 30 W14 X 48 W16 X 67 W18 X 86 W21 X 111 W10 X 30 W10 X 30 W14 X 48 W16 X 67 W18 X 86 W21 X 111 W12 X 35 W12 X 35 W14 X 53 W18 X 76 W21 x 101 W24 X 131 W14 x 43 W14 X 43 W14 X 53 W18 X 76 W18 X 97 W24 X 131 W16 X 50 W16 X 50 W18 X 76 W18 X 97 W21 X 122 W27 X 161 W16 X 57 W16 X 57 W14 X 74 W18 X 97 W21 X 122 W27 X 161 W18 X 65 W18 X 65 W18 X 86 W21 X 111 W24 X 146 W30 X 191 W18 X 71 W18 X 71 W16 X 89 W21 X 111 W24 X 146 W30 X 191
Hoist & Control
End Trucks
Trolley Ext.
Wheel Dia mm (in)
BASE 115TSTRUCK
115 (4.5)
200/230/460V3-60 or 575V/3/60 List Price Wheelbase Drive 380V/3/50 List Price (ft-in) H.P.
5-0
0.75
1st WA3M A3CONTROL
160TSTRUCK
2nd
160 (6.3)
BASE 115TSTRUCK
115 (4.5)
6-3 7-6 5-0
1
0.75
1st 160TSTRUCK
2nd
160 (6.3)
1st 115TSTRUCK
115 (4.5) 2nd
MWA3M A3CONTROL
160TSTRUCK
160 (6.3) 1st
115TSTRUCK
115 (4.5) 2nd
160TSTRUCK 115TSTRUCK
160 (6.3) BASE
115 (4.5)
6-3 7-6 5-0 6-3 7-6 5-0 6-3 7-6 6-3
1
0.75
1
0.75
1 0.75
7-6 160TSTRUCK MWB3M B3CONTROL 115TSTRUCK
1st
BASE
160 (6.3)
115 (4.5)
6-3 7-6 6-3
1
0.75
7-6 160TSTRUCK
1st
160 (6.3)
6-3 7-6
1
160 (6.3)
7-6
1
200 (7.9)
8-0
1.5
160 (6.3)
7-6
1
200 (7.9)
8-0
1.5
BASE 160TSTRUCK 1st WC3M C3CONTROL
200TSTRUCK
2nd BASE
160TSTRUCK 1st 200TSTRUCK
2nd
$17,426 $17,703 $17,979 $18,256 $18,622 $19,253 $17,862 $18,137 $18,414 $18,690 $19,059 $19,680 $17,426 $17,703 $17,979 $18,256 $18,630 $19,253 $17,862 $18,137 $18,414 $18,690 $19,059 $19,680 $18,468 $18,739 $19,102 $19,633 $19,809 $20,181 $19,330 $19,604 $19,966 $20,496 $20,671 $21,045 $24,402 $24,682 $24,962 $25,242 $25,523 $27,174 $25,445 $25,725 $26,005 $26,285 $26,567 $28,210
$18,450 $18,727 $19,003 $19,280 $19,646 $20,277 $18,886 $19,161 $19,438 $19,714 $20,083 $20,704 $18,450 $18,727 $19,003 $19,280 $19,654 $20,277 $18,886 $19,161 $19,438 $19,714 $20,083 $20,704 $19,492 $19,763 $20,126 $20,657 $20,833 $21,205 $20,354 $20,628 $20,990 $21,520 $21,695 $22,069 $25,426 $25,706 $25,986 $26,266 $26,547 $28,318 $26,469 $26,749 $27,029 $27,309 $27,591 $29,354
Kit Wt. (lbs.) 1429 1500 1572 1654 1784 2160 1527 1599 1671 1752 1882 2258 1429 1500 1572 1654 1784 2160 1527 1599 1671 1752 1882 2258 1779 1851 1998 2317 2306 2460 1891 1963 2109 2428 2418 2571 2769 2842 2857 2931 3009 3508 2974 3048 3035 3109 3186 3685
Continued on next page
39
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
PLUG & PLAY CRANE KITS ROTATING AXLE SINGLE GIRDER CRANE KITS FOR US (SHORT) TONS
“PLUG & PLAY” SINGLE GIRDER TOP-RUNNING CRANE KIT BASED ON 40# RUNWAY RAIL AND A BRIDGE SPEED OF **100 FPM For other bridge speeds or rail sizes use the estimating software or contact the Customer Service Department. Changes in speed or rail size may change equipment selection. For lift requirements greater than listed please contact the Customer Service Department. Single Girder Kits with Global/World Series Wire Rope Hoist & Trolley Max Cap (tons)
Bridge
Max. Span ft.)
Lift
Kit Catalog Number
10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60
25 25 25 25 25 25 40 40 40 40 40 40 25 25 25 25 25 25 40 40 40 40 40 40
K1010S10025014*† K1020S10025014*† K1030S10025014*† K1040S10025014*† K1050S10025014*† K1060S10025020*† K1010S10040014*† K1020S10040014*† K1030S10040014*† K1040S10040014*† K1050S10040014*† K1060S10040020*† K1510S10025014*† K1520S10025014*† K1530S10025014*† K1540S10025014*† K1550S10025020*† K1560S10025020*† K1510S10040014*† K1520S10040014*† K1530S10040014*† K1540S10040014*† K1550S10040020*† K1560S10040020*†
10
15
Selected Girder
Hoist & Control
W21 X 83 W21 X 83 W18 X 106 W24 X 131 W24 X 162 W30 X 211 WC3M C3CONTROL W21 X 93 W21 X 93 W27 X 114 W24 X 131 W24 X 162 W30 X 211 W24 X 103 W24 X 103 W27 X 129 W27 X 161 W27 X 194 W36 X 260 WD3M W18 X 119 D3CONTROLM W18 X 119 W27 X 129 W24 X 162 W30 X 211 W36 X 260
End Trucks
Trolley Ext.
160TSTRUCK
Wheel Dia mm (in)
200/230/460V3-60 or 575V/3/60 List Price Wheelbase Drive 380V/3/50 List Price (ft-in) H.P.
160 (6.3) 1st
200TSTRUCK
1 7-6
200 (7.9) 2nd
160TSTRUCK
1.5 8-0
160 (6.3) 1st
200TSTRUCK
1 7-6
200 (7.9) 2nd
200TSTRUCK
1.5 8-0
200 (7.9) 1st
260TSTRUCK
260 (10.2) 2nd
200TSTRUCK
200 (7.9) 1st
260TSTRUCK
260 (10.2) 2nd
1.5 7-6 8-0
7-6
8-0 7-6
2
1.5
2
$24,402 $25,982 $26,262 $26,541 $26,823 $27,174 $25,445 $27,025 $27,306 $27,585 $27,867 $28,210 $36,474 $36,818 $39,064 $39,408 $39,852 $40,097 $36,844 $37,189 $39,433 $39,777 $40,222 $40,467
$25,426 $27,126 $27,406 $27,685 $27,967 $28,318 $26,469 $28,169 $28,450 $28,729 $29,011 $29,354 $37,618 $37,962 $39,908 $40,252 $40,696 $40,941 $37,988 $38,333 $40,277 $40,621 $41,066 $41,311
Kit Wt. (lbs.) 2711 3145 3218 3292 3370 3508 2888 3322 3396 3469 3547 3685 4324 4399 4873 4949 5110 5142 4614 4689 5163 5238 5399 5432
Kit Includes: 1 pair end trucks with bumpers & girder connection plates 1 pair bridge drive gear motors with DC brakE 1 NEMA 4/12 Plug & Play variable frequency bridge control panel with mainline contactor and manual disconnect 1 Standard cataloged World Series or Global King wire rope hoist and trolley 2-speed hoist control 2-speed trolley control "Plug & Play" Festoon cross conductors and pendant conductor systems: Festoon pendant & Cross Conductor Systems (10' track length) 1 trolley festoon tow arm 1 pendant station and cable drop with plug 1 main collector power connection cable (collector shoes and bus bar not included) 2 bridge gear motor connection cables 1 main collector pole 1 pair trolley stops * Power Supply
† Hoist Brand
• 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
W = World Series G = Global King
Note: 3 80V/3/50 reduces speeds by 1/6 575V/3/60 column pricing includes VFD bridge adder referenced on page 47. **Note: C ontrol Panels are shipped from the factory with the VFD speed set at 100 fpm. Instructions for setting other speeds are listed inside the Control Panel cover. Speed setting must not exceed the speed that was requested at time of order. For more information, contact CMCO Customer Service.
40
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
PLUG & PLAY CRANE KITS ROTATING AXLE SINGLE GIRDER CRANE KITS FOR US (SHORT) TONS
“PLUG & PLAY” DOUBLE GIRDER TOP-RUNNING CRANE KIT BASED ON 40# RUNWAY RAIL (UNLESS NOTED IN TABLE) AND A BRIDGE SPEED OF **100 FPM For other bridge speeds or rail sizes use the estimating software or contact the Customer Service Department. For lift requirements greater than listed please contact the Customer Service Department. Changes in speed or rail size may change equipment selection. Double Girder Kits with Global/World Series Wire Rope Hoist & Trolley Max Cap (tons)
5
7.5
10
15
Bridge
Max. Span ft.)
Lift
Kit Catalog Number
Selected Girder
10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40 50 60 10 20 30 40
25 25 25 25 25 25 40 40 40 40 40 40 25 25 25 25 25 25 40 40 40 40
K0510D10025054*† K0520D10025054*† K0530D10025054*† K0540D10025054*† K0550D10025054*† K0560D10025054*† K0510D10040066*† K0520D10040066*† K0530D10040066*† K0540D10040066*† K0550D10040066*† K0560D10040066*† K0710D10025060*† K0720D10025060*† K0730D10025060*† K0740D10025060*† K0750D10025060*† K0760D10025060*† K0710D10040078*† K0720D10040078*† K0730D10040078*† K0740D10040078*†
W12 X 35 W12 X 35 W14 X 53 W18 X 76 W18 X 97 W18 X 130 W12 X 40 W12 X 40 W14 X 61 W18 X 76 W18 X 106 W18 X 143 W14 X 43 W14 X 43 W16 X 67 W18 X 86 W21 X 122 W21 X 147 W14 X 43 W14 X 43 W16 X 67 W18 X 86
Hoist & Control
End Trucks
Trolley Ext.
Wheel Dia mm (in)
7-6
54" WB3T B3CONTROL
160TDTRUCK
200/230/460V3-60 or 575V/3/60 List Price Wheelbase Drive 380V/3/50 List Price (ft-in) H.P.
160 (6.3)
9-0
1
7-6 66" 9-0
160TDTRUCK
60"
200TDTRUCK WC3T C3CONTROL
160 (6.3)
7-6
1
200 (7.9)
9-0
1.5
160 (6.3) 160TDTRUCK
1 78"
50
40
K0750D10040078*†
W21 X 122
60
40
K0760D10040078*†
W21 X 147
10 20 30 40 50
25 25 25 25 25
K1010D10025060*† K1020D10025060*† K1030D10025060*† K1040D10025060*† K1050D10025060*†
W14 X 53 W14 X 53 W18 X 76 W21 X 101 W24 X 131
60
25
K1060D10025060*†
W24 X 162
10 20 30 40 50
40 40 40 40 40
K1010D10040078*† K1020D10040078*† K1030D10040078*† K1040D10040078*† K1050D10040078*†
W14 X 53 W14 X 53 W18 X 76 W21 X 101 W21 X 132
60
40
K1060D10040078*†
W30 X 173
10 20 30 40 50 60 10 20 30 40 50 60
25 25 25 25 25 25 40 40 40 40 40 40
K1510D10025066*† K1520D10025066*† K1530D10025066*† K1540D10025066*† K1550D10025066*† K1560D10025066*† K1510D10040078*† K1520D10040078*† K1530D10040078*† K1540D10040078*† K1550D10040078*† K1560D10040078*†
W16 X 67 W16 X 67 200TDTRUCK W18 X 97 W21 X 122 W27 X 161 260TDTRUCK W27 X 194 WD3T W16 X 67 D3CONTROLM W16 X 67 200TDTRUCK W18 X 97 W21 X 122 W27 X 161 260TDTRUCK W24 X 207
160 (6.3) RAIL 60-105#
9-0
200 (7.9) RAIL 60-105#
200TDTRUCK 160TDTRUCK
1.5
160 (6.3)
1 7-6
60" 200TDTRUCK
200 (7.9) 1.5
200 (7.9) RAIL 60 - 105#
WC3T C3CONTROL 160TDTRUCK
160 (6.3) 78"
200TDTRUCK
9-0
200 (7.9)
1.5
200 (7.9) RAIL 60-105# 200 (7.9) 66"
78"
1.5
200 (7.9) RAIL 60-105# 260 (10.2) RAIL 6-105# 200 (7.9)
9-0
2
1.5
200 (7.9) RAIL 60-105# 260 (10.2) RAIL 60-105#
1
10 - 0
2
Kit Wt. (lbs.)
$23,867 $24,148 $24,429 $24,710 $24,991 $25,394 $24,745 $25,025 $25,429 $25,710 $25,993 $26,272 $28,884 $29,180 $29,478 $29,774 $30,072 $32,274 $29,847 $30,144 $30,441 $30,738
$24,891 $25,172 $25,453 $25,734 $26,015 $26,418 $25,769 $26,049 $26,453 $26,734 $27,017 $27,296 $29,908 $30,204 $30,502 $30,798 $31,096 $33,418 $30,871 $31,168 $31,465 $31,762
2725 2794 2862 2932 2999 3166 2865 2933 3100 3169 3237 3305 3362 3432 3502 3573 3647 4183 3697 3767 3837 3908
$31,037
$32,061
4000
$33,112
$34,256
4443
$28,884 $29,180 $29,478 $31,476 $31,775
$29,908 $30,204 $30,502 $32,620 $32,919
3362 3432 3502 3916 3989
$32,274
$33,418
4206
$29,847 $30,144 $30,441 $32,519 $32,817
$30,871 $31,168 $31,465 $33,663 $33,961
3697 3767 3837 4281 4355
$33,112
$34,256
4443
$39,689 $40,033 $40,378 $40,722 $43,336 $43,679 $42,769 $43,113 $43,458 $43,802 $46,610 $46,953
$40,833 $41,177 $41,522 $41,866 $44,180 $44,523 $43,913 $44,257 $44,602 $44,946 $47,454 $47,797
4853 4948 5019 5092 5673 5749 5097 5192 5264 5336 6013 6090
Continued on next page
41
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS ROTATING AXLE SINGLE GIRDER CRANE KITS FOR US (SHORT) TONS
“PLUG & PLAY” DOUBLE GIRDER TOP-RUNNING CRANE KIT BASED ON 40# RUNWAY RAIL (UNLESS NOTED IN TABLE) AND A BRIDGE SPEED OF **100 FPM For other bridge speeds or rail sizes use the estimating software or contact the Customer Service Department. For lift requirements greater than listed please contact the Customer Service Department. Changes in speed or rail size may change equipment selection.
Double Girder Kits with Global/World Series Wire Rope Hoist & Trolley Max Cap (tons)
Bridge
Max. Span ft.)
Lift
Kit Catalog Number
Selected Girder
10 20 30 40 50 60 10 20 30 40 50
16' 8" 16' 8" 16' 8" 16' 8" 16' 8" 16' 8" 26' 8" 26' 8" 26' 8" 26' 8" 26' 8"
K2010D10016066*† K2020D10016066*† K2030D10016066*† K2040D10016066*† K2050D10016066*† K2060D10016066*† K2010D10026078*† K2020D10026078*† K2030D10026078*† K2040D10026078*† K2050D10026078*†
W16 X 67 200TDTRUCK W16 X 67 W21 X 101 W24 X 146 260TDTRUCK W24 X 176 W27 X 217 WD3T W16 X 67 D3CONTROLM 200TDTRUCK W16 X 67 W21 X 101 W24 X 146 W24 X 176 260TDTRUCK
60
26' 8"
K2060D10026078*†
W27 X 217
20
Hoist & Control
End Trucks
Trolley Ext.
Wheel Dia mm (in)
200/230/460V3-60 or 575V/3/60 List Price Wheelbase Drive 380V/3/50 List Price (ft-in) H.P.
200 (7.9) RAIL 60-105# 66"
260 (10.2) RAIL 60-105#
1.5
9-0
2 3
200 (7.9) RAIL 60-105# 78"
260 (10.2) RAIL 60-105# 260 (10.2) RAIL 105#
1.5 2 10' 3
Kit Wt. (lbs.)
$42,066 $42,367 $44,647 $44,949 $45,251 $46,145 $42,769 $44,082 $46,533 $46,833 $47,137
$43,210 $43,511 $45,491 $45,793 $46,095 $46,989 $43,913 $45,226 $47,377 $47,677 $47,981
5230 5302 5884 5956 6027 6118 5120 5544 6222 6294 6365
$48,031
$48,875
6456
Kit Includes: 1 pair end trucks with bumpers & girder connection plates 1 pair bridge drive gear motors with DC brake 1 NEMA 4/12 Plug & Play variable frequency bridge control panel with mainline contactor and manual disconnect 1 Standard cataloged World Series or Global King wire rope hoist and trolley 2-speed hoist control variable frequency trolley control “Plug & Play” Festoon cross conductors and pendant conductor systems: Festoon pendant & Cross Conductor Systems (10' track length) 1 trolley festoon tow arm 1 pendant station and cable drop with plug 1 main collector power connection cable (collector shoes and bus bar not included) 2 bridge gear motor connection cables 1 main collector pole * Power Supply
† Hoist Brand
• 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
W = World Series G = Global King
Note: 380V/3/50 reduces speeds by 1/6 575V/3/60 column pricing includes VFD bridge adder referenced on page 47. **Note: Control Panels are shipped from the factory with the VFD speed set at 100 fpm. Instructions for setting other speeds are listed inside the Control Panel cover. Speed setting must not exceed the speed that was requested at time of order. For more information, contact CMCO Customer Service.
42
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE CRANE KIT BRIDGE OPTIONS Description
HAZARDOUS LOCATIONS OPTIONS NOTE: For special gear motors suitable for hazardous locations please contact Applications Engineering.
List Price
NEMA 4X Enclosure Adders
Description
$1,467
Stainless Steel
Strip Heaters Strip Heater (Non Hazardous areas only) Includes strip heaters with thermostat in both hoist and bridge panels.
$808
For strip heater with thermostat in bridge panel ONLY
$597
Note: For motor strip heaters
List Price
Spark Resistant Bronze Wheels/Rail Sweeps
Consult Factory
Warning Horns Warning Horn Must specify method of activation
$420
Warning Light Must specify method of activation
$700
Pendant Controlled Warning Horn
$602
Radio Controls $1,410
Radio Control - 2 Transmitters Easy plug in connection (includes 2 transmitters & 1 plug mounted receiver)
$2,031
Radio Control Panel Connector for Customer Supplied Radio Control Includes Connector & Housing. P/N 11829302
$60
Upper block operated control circuit limit switch
$375
Trolley Brake (NEMA 1 indoor use) AC motor mounted disc type rated at 50% torque single traverse motor applications for monorail hoist trolleys
$539
Trolley Brake, NEMA 4
$663
VFD Monorail Trolley for 200/230/460/3/60 or 380/3/50*
$5,676
With rail sweeps (set of 4)
$7,449
200 mm (7.9") Bronze Wheels (set of 4)
$9,372
With rail sweeps (set of 4)
$11,990
260 mm (10.2") Bronze Wheels (set of 4)
$15,666
With rail sweeps (set of 4)
$18,633
Kit Number
Size End Truck
Customer Supplied Cross Shaft Size
List Price
45257001
115 mm (4.5") Wheels
1 3/16"
$1,460
45257002
160 mm (6.3") Wheels
1 5/16"
$1,976
45257003
200 mm (7.9") and 260 mm (10.2") Wheels
1 3/16"
$3,108
ADDITIONAL PARTS Add $731
Qty needed for each 8' over the 28' kit span
List Price
Hand Chain with link - 36' (approx. 18' of hand chain drop from hand chain wheel)
1 needed per kit All spans
$225
Additional Hand Chain - per foot
Needed only if longer hand chain drop is required
$4.30
8280
Coupling Kit for kit #45257001 - 1 3/16"
1
$110
904625
Pillow Block Kit for kit #45257001 & #45257003 - 1 3/16"
1
$111
912122
Coupling Kit for kit #45257002 - 1 5/16"
1
$110
912112
Pillow Block Kit for kit #45257002 - 1 5/16"
1
$171
Part Number
Add $1612
24 Volt Control System Standard is 115 volts
$4,356
160 mm (6.3") Bronze Wheels (set of 4)
Each kit contains all the necessary parts* (except hand chain) for spans up to 28'. For spans over 28',please refer to the additional parts list. Additional parts are needed for each 8' span over the 28' span.
Common Trolley Adders
Electromotive G+ for 575/3/60, 3HP or less *380/3/50 reduces speeds by 1/6
$2,965
With rail sweeps (set of 4)
HAND GEARED OPTIONS
Radio Control - 1 Transmitter Easy plug in connection Includes 1 transmitter & 1 plug mounted receiver
Electromotive G+ Mini for 2HP or less
115 mm (4.5") Bronze Wheels (set of 4)
8282 $366
Travel Limit Switch Single Switch, Bi-Directional (Trip Dog by others) NEMA 4/12
$837
Disconnect Panel Adders: 60 Amp Panel
$251
100 Amp Panel
$328
Thermal Overload Relays
$225
Pendant Drop (Adder or deduct from standard hoist drop - per ft.)
Description
*Note: Please refer to the Parts and Service Manual for a complete listing of all parts supplied in each kit.
$5.50
Bumpers No additional charge to increase bumper by 1 size Festoon Cross Arm J Clips for Girders with Channel Cap: P/N 451846J2 (up to 20' span)
$73
P/N 451846J4 (20' to 40' span)
$115
P/N 451846J6 (40' to 60' span)
$158
Note: Some options will extend lead times. *Note: For hoist and trolley options, refer to the appropriate Hoist Price List
43
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS
END STOP ASSEMBLY Trolley End Stop Assemblies are included with all Single Girder Plug & Play Crane Kits as standard equipment. (See pages 36 – 42) To order for field installation on other single girder crane kits please see price chart below.
Part Number
Flange Range
List Price
33316505
3-3/4" - 10"
$185
33316506
10" - 22"
$196
33316508
22” - 26”
$201
INSTALLING END STOPS 1. L ocate and weld trolley stop angles or install end stop assemblies in the desired position on the girder depending on your application. 2. E nsure that the trolley stop angles or end stops are positioned to make contact with the trolley bumpers. 3. If you are installing the adjustable end stop assemblies, once they are positioned correctly, tighten the flange adjustment nut to 48 ft. lbs. torque and the clamping nut to 207 ft. lbs. torque.
44
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SPECIAL INFORMATION ROTATING AXLE INDIVIDUAL COMPONENTS This section contains individual single and double girder crane components. Pricing for the following components are found in this section: End Trucks with Gear Motors Variable Frequency Control Panels
ROTATING AXLE, TOP RUNNING TUBE-FRAME END TRUCK CATALOG NUMBERING SYSTEM The following end truck catalog numbering system makes ordering a pair of end trucks for a specific application easier and insures that you will receive exactly what you ordered. Example - Typical Double Girder Truck Catalog Number as Cataloged - Less Options EXAMPLE: 160TD105HD110
Note: Order acknowledgements will indicate the first 3 fields of your selected catalog number along with a description of your truck features: EXAMPLE: 160TDTRUCK
160
T
D
105
H
D
1
10
—
E
N
D
T
R
U
C
K
S
E Wheel Diameter 115 115 mm (4.5”) 160 160 mm (6.3”) 200 200 mm (7.9”) 260 260 mm (10.2”) N End Truck Type T Top-Running D Application S Single Girder D Double Girder T Rail 040 40# Maximum 105 60# - 105#
R Wheelbase D 4’ - 6” E 5’ - 0” F 5’ - 6” G 6’ - 0” H 6’ - 3” J 6’ - 6” K 7’ - 0” L 7’ - 6” M 8’ - 0” N 8’ - 6” P 9’ - 0” R 9’ - 6” T 10’ - 0”
U Gage C 48” D 54” E 60” F 66” G 72” H 75” J 78” K 84” L 90” M 96” N 102” P 108” R 114” T 120” U 126”
C Voltage 1 = 200/3/60 2 = 208/3/60 3 = 230/3/60 4 = 460/3/60 5 = 575/3/60 6 = 380/3/50 K HP 07 10 15 20 30
0.75 - (115 mm) 1.0 - (160 mm) 1.5 - (200 mm) 2.0 - (260 mm @ 100 fpm) 3.0 - (260 mm @ 150 fpm)
S Bumper (Blank) Default 1 R1 2 R2 3 R3 4 R4 5 R5
Note: Not all combinations are possible
45
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE INDIVIDUALCOMPONENTS TOP-RUNNING SINGLE GIRDER END TRUCKS WITH GEAR MOTORS
Truck & Drive Catalog No. 115TS040D*07 115TS040H*07 115TS040L*07
Wheel Dia. mm (in) 115 (4.5)
160TS040D*10
A Wheel base (ft - in)
ONE PAIR INCLUDING: Motor Hp each
Rail
4-6 6-3
0.75
7-6
25 - 40#
4-6
Wt. lbs.
List Price
448
$4,627
529
$4,775
588
$4,879
634
$4,904
olt-on rail sweeps with rubber bumpers B One top and side-mounted girder connection plate One pair of gear motors with DC disc brake 8:1 Max Span: Wheel Base Ratio
6-3
748
$5,073
160TS040L*10
160
7-6
829
$5,193
For Span up to:
Use Wheel Base
160TS105D*10
(6.3)
4-6
634
$4,904
36 ft
4'6" = D
748
$5,073
40 ft
5'0" = E 5'6" = F
160TS040H*10
1 60 - 105#
160TS105H*10
6-3
160TS105L*10
7-6
829
$5,193
44 ft
200TS040H*15
6-3
1076
$6,486
48 ft
6'0"= G
1183
$6,681
50 ft
6'3" = H
1076
$6,486
52 ft
6'6" = J
1183
$6,681
56 ft
7'0" = K
1495
$8,197
60 ft
7'6" = L
1615
$8,452
64 ft
8'0" = M
1495
$8,197
68 ft
8'6" = N
1615
$8,452
72 ft
9'0" = P
1495
$8,586
76 ft
9'6" = R
1615
$8,842
80 ft
10'0" = T
1495
$8,586
84 ft
10'6" = U
1615
$8,842
200TS040L*15
200
7-6
200TS105H*15
(7.9)
6-3
200TS105L*15
7-6
260TS040H*20
6-3
260TS040L*20
7-6
260TS105H*20
6-3
260TS105L*20
260
7-6
260TS040H*30
(10.2)
6-3
260TS040L*30
7-6
260TS105H*30
6-3
260TS105L*30
7-6
25 - 40# 1.5 60 - 105# 25 - 40# 2** 60 - 105# 25 - 40# 3 60 - 105#
* Power Supply
All 60-105# wheels will fit the 100# ASCE with 2-3/4” rail head.
• 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Adjustable to 100 fpm only. All other motors are adjustable to 150 fpm
Allowable Bending Moment
Wheel Base Adders: Wheel bases in 6" increments are available from a minimum of 4' - 6" to a maximum of 12' - 6". Add for wheel bases in-between cataloged wheel bases in 6" increments:
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
115 mm (4.5")��������������������������������������������������������������������������� add $41 per 6" 160 mm (6.3")��������������������������������������������������������������������������� add $48 per 6" 200 mm (7.9")��������������������������������������������������������������������������� add $78 per 6" 260 mm (10.2")����������������������������������������������������������������������� add $102 per 6"
Deduct for End Trucks without Connection Plates and Hand Holes: 15 mm (4.5")��������������������������������������������������������������������������������� deduct $125 160 mm (6.3")������������������������������������������������������������������������������� deduct $157 200 mm (7.9")������������������������������������������������������������������������������� deduct $202 260 mm (10.2")����������������������������������������������������������������������������� deduct $216 Must specify on order: “Without Connection Plates and Hand Holes.”
46
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE INDIVIDUALCOMPONENTS TOP-RUNNING DOUBLE GIRDER END TRUCKS WITH GEAR MOTORS ONE PAIR INCLUDING:
A Wheel base (ft - in)
Gage (ft - in)
160TD040LD*10
7-6
160TD040LE*10
7-6
160TD040PD*10
Truck & Drive Catalog No.
Wheel Dia. mm (in)
Motor Hp each
olt-on rail sweeps with rubber bumpers B Two top and side-mounted girder connection plates One pair of gear motors with DC disc brake
Wt. lbs.
List Price
4-6
858
$6,012
5-0
858
$6,012
9-0
4-6
954
$6,156
* Power Supply
160TD040PE*10
9-0
5-0
954
$6,156
• 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
Rail
160TD040PF*10
9-0
5-6
954
$6,156
160TD040PG*10
9-0
6-0
954
$6,156
160TD040PJ*10
9-0
6-6
954
$6,156
160TD040TD*10
10 - 0
4-6
1018
$6,253
160TD040TE*10
10 - 0
5-0
1018
$6,253
160TD040TF*10
10 - 0
5-6
1018
$6,253
160TD040TK*10
10 - 0
7-0
1018
$6,253
1018
$6,253
858
$6,012
25 - 40#
160TD040TL*10
160
10 - 0
7-6
160TD105LD*10
(6.3)
7-6
4-6
160TD105LE*10
7-6
5-0
858
$6,012
160TD105PD*10
9-0
4-6
954
$6,156
160TD105PE*10
9-0
5-0
954
$6,156
160TD105PF*10
9-0
5-6
954
$6,156
160TD105PG*10
9-0
6-0
954
$6,156
160TD105PJ*10
9-0
6-6
954
$6,156
160TD105TD*10
10 - 0
4-6
1018
$6,253
160TD105TE*10
10 - 0
5-0
1018
$6,253
160TD105TF*10
10 - 0
5-6
1018
$6,253
160TD105TK*10
10 - 0
7-0
1018
$6,253
160TD105TL*10
10 - 0
7-6
1018
$6,253
200TD040LE*15
7-6
5-0
1220
$7,873
200TD040PE*15
9-0
5-0
1334
$8,108
200TD040PF*15
9-0
5-6
1334
$8,108
200TD040PG*15
9-0
6-0
1334
$8,108
1
60 - 105#
25 - 40#
Wheel Base Adders: Wheel bases in 6" increments are available from a minimum of 4' 6" to a maximum of 12' - 6". Add for wheel bases in-between cataloged wheel bases in 6" increments: 160 mm (6.3")����������������������������������������������������� add $48 per 6" 200 mm (7.9")����������������������������������������������������� add $78 per 6" 260 mm (10.2")������������������������������������������������� add $102 per 6"
Deduct for End Trucks without Connection Plates and Hand Holes: 160 mm (6.3")��������������������������������������������������������� deduct $313 200 mm (7.9")��������������������������������������������������������� deduct $403 Must specify on order: “Without Connection Plates and Hand Holes.”
All 60-105# wheels will fit the 100# ASCE with 2-3/4” rail head.
200TD040PJ*15
9-0
6-6
1334
$8,108
200TD040TE*15
10 - 0
5-0
1440
$8,265
200TD040TF*15
10 - 0
5-6
1440
$8,265
200TD040TK*15
10 - 0
7-0
1440
$8,265
1440
$8,265
115 mm
=
332,000#/in
1220
$7,873
160 mm
=
534,000#/in
Allowable Bending Moment
200TD040TL*15
200
10 - 0
7-6
200TD105LE*15
(7.9)
7-6
5-0
200TD105PE*15
9-0
5-0
1334
$8,108
200 mm
=
917,000#/in
200TD105PF*15
9-0
5-6
1334
$8,108
260 mm
=
1,187,000#/in
200TD105PG*15
9-0
6-0
1334
$8,108
200TD105PJ*15
9-0
6-6
1334
$8,108
200TD105TE*15
10 - 0
5-0
1440
$8,265
200TD105TF*15
10 - 0
5-6
1440
$8,265
200TD105TK*15
10 - 0
7-0
1440
$8,265
200TD105TL*15
10 - 0
7-6
1440
$8,265
1.5
60 - 105#
47
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE INDIVIDUALCOMPONENTS TOP-RUNNING DOUBLE GIRDER END TRUCKS WITH GEAR MOTORS Truck & Drive Catalog No.
Wheel Dia. mm (in)
ONE PAIR INCLUDING:
A Wheel base (ft - in)
Gage (ft - in)
Motor Hp each
Rail
Wt. lbs.
List Price
Bolt-on rail sweeps with rubber bumpers Two top and side-mounted girder connection plates One pair of gear motors with DC disc brake
260TD040LE*20
7-6
5-0
1504
$9,958
260TD040PE*20
9-0
5-0
1828
$10,265
260TD040PF*20
9-0
5-6
1828
$10,265
* Power Supply
260TD040PG*20
9-0
6-0
1828
$10,265
• 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260TD040PJ*20
9-0
6-6
1828
$10,265
260TD040TE*20
10 - 0
5-0
1924
$10,470
25 - 40#
260TD040TF*20
10 - 0
5-6
1924
$10,470
260TD040TK*20
10 - 0
7-0
1924
$10,470
260TD040TL*20
10 - 0
7-6
1924
$10,470
2**
260TD105LE*20
7-6
5-0
1504
$9,958
260TD105PE*20
9-0
5-0
1828
$10,265
260TD105PF*20
9-0
5-6
1828
$10,265
260TD105PG*20
9-0
6-0
1828
$10,265
60 - 105#
260TD105PJ*20
9-0
6-6
1828
$10,265
260TD105TE*20
10 - 0
5-0
1924
$10,470
260TD105TF*20
10 - 0
5-6
1924
$10,470
260TD105TK*20
10 - 0
7-0
1924
$10,470
260TD105TL*20
260
10 - 0
7-6
1924
$10,470
260TD040LE*30
(10.2)
**Adjustable to 100 fpm only. All other motors are adjustable to 150 fpm
Wheel Base Adders: Wheel bases in 6" increments are available from a minimum of 4' 6" to a maximum of 12' - 6". Add for wheel bases in-between cataloged wheel bases in 6" increments: 160 mm (6.3")����������������������������������������������������� add $48 per 6" 200 mm (7.9")����������������������������������������������������� add $78 per 6" 260 mm (10.2")������������������������������������������������� add $102 per 6"
7-6
5-0
1578
$10,347
260TD040PE*30
9-0
5-0
1842
$10,654
260TD040PF*30
9-0
5-6
1842
$10,654
260TD040PG*30
9-0
6-0
1842
$10,654
260TD040PJ*30
9-0
6-6
1842
$10,654
260 mm (10.2")������������������������������������������������������� deduct $413
260TD040TE*30
10 - 0
5-0
1938
$10,859
260TD040TF*30
10 - 0
5-6
1938
$10,859
Must specify on order: “Without Connection Plates and Hand Holes.”
260TD040TK*30
10 - 0
7-0
1938
$10,859
260TD040TL*30
10 - 0
7-6
1938
$10,859
260TD105LE*30
7-6
5-0
1578
$10,347
260TD105PE*30
9-0
5-0
1842
$10,654
260TD105PF*30
9-0
5-6
1842
$10,654
260TD105PG*30
9-0
6-0
1842
$10,654
25 - 40#
3
260TD105PJ*30
9-0
6-6
1842
$10,654
260TD105TE*30
10 - 0
5-0
1938
$10,859
260TD105TF*30
10 - 0
5-6
1938
$10,859
260TD105TK*30
10 - 0
7-0
1938
$10,859
260TD105TL*30
10 - 0
7-6
1938
$10,859
60 - 105#
48
Deduct for End Trucks without Connection Plates and Hand Holes:
All 60-105# wheels will fit the 100# ASCE with 2-3/4” rail head.
Allowable Bending Moment 115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS VARIABLE FREQUENCY BRIDGE CONTROL PANELS
STANDARD (NON-PLUG & PLAY) NEMA 4/12 WITH BUILT IN DISCONNECT For Bridge Traverse Motions Speed range up to 20:1 (in F.P.M.) Price Includes; Feature: † Electromotive Drive Type Control only CMAA Service Class Standard NEMA 4/12 Panel Control Points Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle External Dynamic Braking Resistor Fuses Hinge Point
1-3 h.p. G+ Mini C 20 W X 16 H X 8.5 D* 2-step, 3-step or 2-step & 3-step infinitely variable 30 Amp 115V / 75VA 30 Amp Yes Yes Horizontal at bottom of panel
5-10 h.p. G+ Mini C - D (7.5 hp) 24 W X 20 H X 10.5 D 2-step, 3-step & 5-step or 2-step & 3-step infinitely variable 60 Amp* 115V / 75VA 60 Amp Yes Yes Horizontal at bottom of panel
Includes: DC Brake Relay (9 amp), Surge Suppression on Coil and Space Terminal Board (10 terminals)
Max. Total H.P.
Power Supply
2
** Max. Full Load Amps
Catalog Number 230 V
Catalog Number 200 V
List Price
8
452314-22
452314-12
$2,488
3
200 to 230 Volts
11
452314-23
452314-13
$2,560
5
50/60 Hz
17.5
452314-25
452314-15
$3,274
7 1/2
*** Wt. (lbs)
Power Supply
** Max. Full Load Amps
Catalog Number 460 V
List Price
3.4
452314-42
$2,500
4.8
452314-43
$2,680
8.6
452314-45
$3,395
14.8
452313-47
$4,719
80 460 Volts 50/60 Hz 105
25
452313-27
452313-17
$4,474
*** Wt. (lbs) 80
105
† Note: C ontrol Panels are shipped from the factory with the VFD speed set at 100 fpm. Instructions for setting other speeds are listed inside the Control Panel cover. Speed setting must not exceed the speed that was requested at time of order. For more information, contact CMCOCustomer Service. * 3 hp panel for 460 volts is 24 W X 20 H X 10.5 D. *Adding a 60 amp disconnect increases enclosure size to that of the 5-10 hp panel. ** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded Especially on 230 volt applications. *** Add 15% for approximate shipping weight. Note: F or 575/3/60 power, add to Standard Variable Frequency Drive: 2 hp: ����������������������������������������������������������������������������������������������������������� Add $1,024 List 3 hp: ����������������������������������������������������������������������������������������������������������� Add $1,144 List 5 hp: �������������������������������������������������������������������������������������������������������������� Add $844 List 7 1/2 hp: ������������������������������������������������������������������������������������������������������� Add $844 List
49
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SINGLE GIRDER TOP RUNNING END TRUCKS ACTUAL WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. • For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
CAST IRON WHEELS (ACTUAL) For Spans Thru (ft.-in.)
Catalog Number
36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0
115TS040D*07 115TS040H*07 115TS040L*07 160TS040D*10 160TS040H*10 160TS040L*10 160TS105D*10 160TS105H*10 160TS105L*10 200TS040D*15 200TS040H*15 200TS040L*15 200TS105D*15 200TS105H*15 200TS105L*15 260TS040D*20 260TS040H*20 260TS040L*20 260TS105D*20 260TS105H*20 260TS105L*20
Wheel Diameter mm (in.) 115 (4.5)
160 (6.3)
200 (7.9)
260 (10.2)
Wheel Base (ft.-in.) 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6
Weight HP with Each Gearmotors Motor (lbs.) 0.75
1
1.5
2
448 529 588 634 748 829 634 748 829 926 1076 1183 926 1076 1183 1328 1495 1615 1328 1495 1615
Max. Allowable ACTUAL Wheel Loads (lbs.), P 25#
30#
40#
60#
80#
100 fpm
100 fpm
100 fpm
100 fpm
100 fpm
Class C Class D Class C Class D Class C Class D Class C Class D Class C Class D 7100 6800 6500 10700 10400 10000 – – –
6300 6100 5800 9600 9300 9000 – – – 12600 12300 11900 – – –
13400 13300 – – –
16400
17400
15900 – – –
– – –
7500 7300 6900 11400 11100 10700 – – –
6600 6400 6100 10200 9900 9500 – – – 13400 13100 12600 – – –
14300 14100 – – –
17500
18500
16900 – – –
– – –
8400 8100 7300 13400 13000 11800 – – –
6600 6400 6100 11500 11100 10700 – – – 15800 15400 14800 – – –
16800 16600 – – –
20500
21800
19800 – – –
– – –
– – – – – – 14400 13900 11800 – – –
20300 – – –
– – – – – – 11500 11100 10700 – – – 22100 21600 20300 – – –
– – – – – – 14400 13900 11800 – – – 25200 24400 20300 – – –
30500
28700
32700
26300
26300
26300
23500
– – – – – – 11500 11100 10700 – – – 23700 23100 20300 – – – 30200 29400 26300
BRONZE WHEELS (ACTUAL) For Spans Thru (ft.-in.)
Catalog Number
36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0
115TS040D*07 115TS040H*07 115TS040L*07 160TS040D*10 160TS040H*10 160TS040L*10 160TS105D*10 160TS105H*10 160TS105L*10 200TS040D*15 200TS040H*15 200TS040L*15 200TS105D*15 200TS105H*15 200TS105L*15 260TS040D*20 260TS040H*20 260TS040L*20 260TS105D*20 260TS105H*20 260TS105L*20
Wheel Diameter mm (in.) 115 (4.5)
160 (6.3)
200 (7.9)
260 (10.2)
Wheel Base (ft.-in.) 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6
Weight HP with Each Gearmotors Motor (lbs.) 0.75
1
1.5
2
448 529 588 634 748 829 634 748 829 926 1076 1183 926 1076 1183 1328 1495 1615 1328 1495 1615
Max. Allowable ACTUAL Wheel Loads (lbs.), P 25#
30#
40#
60#
80#
100 fpm
100 fpm
100 fpm
100 fpm
100 fpm
Class C Class D Class C Class D Class C Class D Class C Class D Class C Class D 5800 5600 5400 8900 8600 8300 – – – 11100 11000 – – – 14400 – – –
5200 5000 4800 7900 7700 7400 – – – 10400 10200 9800 – – – 13500 13100 – – –
6200 6000 5700 9400 9100 8800 – – – 11800 11600 – – – 15300 – – –
5600 5400 5100 8400 8200 7900 – – – 11100 10800 10400 – – – 14400 13900 – – –
7300 7000 6700 11100 10700 10400 – – – 13800 13700 – – – 18000 – – –
6500 6300 6000 9900 9600 9300 – – – 13000 12700 12200 – – – 16900 16400 – – –
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design. Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application. * Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
50
– – – – – – 14400 13900 11800 – – – 19400 19200 – – – 25200
– – – – – – 11400 11000 10600 – – – 18200 17800 17100 – – –
– – – – – – 14400 13900 11800 – – – 20800 20000 20300 – – –
– – – – – – 11400 11000 10600 – – – 19500 19100 18300 – – –
23700
27000
25400
23000
26300
24600
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in 200 mm = 917,000#/in 260 mm = 1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
SINGLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. • For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
CAST IRON WHEELS (DURABILITY) For Spans Thru (ft.-in.)
Catalog Number
36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0
115TS040D*07 115TS040H*07 115TS040L*07 160TS040D*10 160TS040H*10 160TS040L*10 160TS105D*10 160TS105H*10 160TS105L*10 200TS040D*15 200TS040H*15 200TS040L*15 200TS105D*15 200TS105H*15 200TS105L*15 260TS040D*20 260TS040H*20 260TS040L*20 260TS105D*20 260TS105H*20 260TS105L*20
Wheel Diameter mm (in.) 115 (4.5)
160 (6.3)
200 (7.9)
260 (10.2)
Wheel Base (ft.-in.) 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6
Weight HP with Each Gearmotors Motor (lbs.) 0.75
1
1.5
2
448 529 588 634 748 829 634 748 829 926 1076 1183 926 1076 1183 1328 1495 1615 1328 1495 1615
Max. Allowable DURABILITY Wheel Loads (lbs.), P 25#
30#
40#
60#
80#
100 fpm
100 fpm
100 fpm
100 fpm
100 fpm
Class C Class D Class C Class D Class C Class D Class C Class D Class C Class D 6200
6200
6600
6400
8600
8600
9100
9100
7300
6500
10700
10200
– – –
– – –
– – –
– – –
10400 – – –
10700
10700
11400
11400
13400
13400
– – –
– – –
– – –
– – –
– – –
– – –
14000
14000
14800
14800
17400
17400
– – –
– – –
– – –
– – –
– – –
– – –
– – –
– – – – – –
– – – – – –
11500 10400 – – –
10200
– – – – – –
– – – – – –
11500
10200
– – –
10400 – – –
– – –
18800
18800
20100
20100
17000 – – –
17000 – – –
17000 – – –
17000 – – –
24400
24400
26200
26200
22000
22000
22000
22000
BRONZE WHEELS (DURABILITY) For Spans Thru (ft.-in.)
Catalog Number
36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0 36-0 50-0 60-0
115TS040D*07 115TS040H*07 115TS040L*07 160TS040D*10 160TS040H*10 160TS040L*10 160TS105D*10 160TS105H*10 160TS105L*10 200TS040D*15 200TS040H*15 200TS040L*15 200TS105D*15 200TS105H*15 200TS105L*15 260TS040D*20 260TS040H*20 260TS040L*20 260TS105D*20 260TS105H*20 260TS105L*20
Wheel Diameter mm (in.) 115 (4.5)
160 (6.3)
200 (7.9)
260 (10.2)
Wheel Base (ft.-in.) 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6 4-6 6-3 7-6
Weight HP with Each Gearmotors Motor (lbs.) 0.75
1
1.5
2
448 529 588 634 748 829 634 748 829 926 1076 1183 926 1076 1183 1328 1495 1615 1328 1495 1615
Max. Allowable ACTUAL Wheel Loads (lbs.), P 25#
30#
40#
60#
80#
100 fpm
100 fpm
100 fpm
100 fpm
100 fpm
Class C Class D Class C Class D Class C Class D Class C Class D Class C Class D – – – – – –
– – – – – –
– – – – – –
– – – – – –
11500
10200
11500
10200
10100 – – –
10100 – – –
10100 – – –
10100 – – –
– – –
15500
15500
16600
16600
– – –
16400 – – –
16400 – – –
20200
21600
21600
21000
21000
5100
5100
5400
5400
6400
6400
7100
7100
7500
7500
8900
8900
– – –
– – –
– – –
– – –
– – –
– – –
8900
8900
9400
9400
11100
11100
– – –
– – –
– – –
– – –
– – –
11500
11500
12200
12200
14400
14400
– – –
– – –
– – –
– – –
– – –
– – –
– – –
20200
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
51
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
DOUBLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. • 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
160 MM (6.3") WHEELS, 30#-40# RAIL For Spans Thru (ft.-in.)
Wheel Base (ft.-in.)
52-6
7-6
63-0
9-0
60-0
10-0
52-6
7-6
63-0
9-0
60-0
10-0
Gage (ft.-in.)
ASCE Rail
4-6 5-0 4-6 5-0 5-6 6-0 6-6 4-6 5-0 5-6 6-0 6-6 7-0 7-6 4-6 5-0 4-6 5-0 5-6 6-0 6-6 4-6 5-0 5-6 6-0 6-6 7-0 7-6
30#
40#
Catalog Number 160TD040LD*10 160TD040LE*10 160TD040PD*10 160TD040PE*10 160TD040PF*10 160TD040PG*10 160TD040PJ*10 160TD040TD*10 160TD040TE*10 160TD040TF*10 160TD040TG*10 160TD040TJ*10 160TD040TK*10 160TD040TL*10 160TD040LD*10 160TD040LE*10 160TD040PD*10 160TD040PE*10 160TD040PF*10 160TD040PG*10 160TD040PJ*10 160TD040TD*10 160TD040TE*10 160TD040TF*10 160TD040TG*10 160TD040TJ*10 160TD040TK*10 160TD040TL*10
Max. Allowable DURABILITY Wheel Load (lbs), Pe
Wheel Diameter mm (in.)
Cast Iron Wheels Class C
Class D
Bronze Wheels - 225 Bhn Class C
Class D
HP Each Motor
Weight with Gearmotors (lbs.) 858
954 160
9100
(6.3")
9100
7500
7500
1
1018
858
954 160
10700
(6.3")
10200
8900
8900
1
1018
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
52
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
DOUBLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. • 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
160 MM (6.3") WHEELS, 60#-80# RAIL For Spans Thru (ft.-in.)
Wheel Base (ft.-in.)
52-6
7-6
63-0
9-0
60-0
10-0
52-6
7-6
63-0
9-0
60-0
10-0
Gage (ft.-in.)
ASCE Rail
4-6 5-0 4-6 5-0 5-6 6-0 6-6 4-6 5-0 5-6 6-0 6-6 7-0 7-6 4-6 5-0 4-6 5-0 5-6 6-0 6-6 4-6 5-0 5-6 6-0 6-6 7-0 7-6
60#
80#
Catalog Number 160TD0105LD*10 160TD105LE*10 160TD105PD*10 160TD105PE*10 160TD105PF*10 160TD105PG*10 160TD105PJ*10 160TD105TD*10 160TD105TE*10 160TD105TF*10 160TD105TG*10 160TD105TJ*10 160TD105TK*10 160TD105TL*10 160TD0105LD*10 160TD105LE*10 160TD105PD*10 160TD105PE*10 160TD105PF*10 160TD105PG*10 160TD105PJ*10 160TD105TD*10 160TD105TE*10 160TD105TF*10 160TD105TG*10 160TD105TJ*10 160TD105TK*10 160TD105TL*10
Max. Allowable DURABILITY Wheel Load (lbs), Pe
Wheel Diameter mm (in.)
Cast Iron Wheels Class C
Class D
Bronze Wheels - 225 Bhn Class C
Class D
HP Each Motor
Weight with Gearmotors (lbs.) 858
954 160
11500
(6.3")
10200
11500
10200
1
1018
858
954 160
11500
(6.3")
10200
11500
10200
1
1018
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
53
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
DOUBLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. • 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
200 MM (7.9") WHEELS, 30#-40# RAIL For Spans Thru (ft.-in.)
Wheel Base (ft.-in.)
Gage (ft.-in.)
52-6
7-6
63-0
9-0
5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6 5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6
60-0
10-0
52-6
7-6
63-0
9-0
60-0
10-0
ASCE Rail
30#
40#
Catalog Number 200TD040LE*15 200TD040PE*15 200TD040PF*15 200TD040PG*15 200TD040PG*15 200TD040TE*15 200TD040TF*15 200TD040TG*15 200TD040TJ*15 200TD040TK*15 200TD040TL*15 200TD040LE*15 200TD040PE*15 200TD040PF*15 200TD040PG*15 200TD040PG*15 200TD040TE*15 200TD040TF*15 200TD040TG*15 200TD040TJ*15 200TD040TK*15 200TD040TL*15
Max. Allowable DURABILITY Wheel Load (lbs), Pe
Wheel Diameter mm (in.)
Cast Iron Wheels Class C
Class D
Bronze Wheels - 225 Bhn Class C
Class D
HP Each Motor
Weight with Gearmotors (lbs.) 1220 1334
200
11400
(7.9")
11400
9400
9400
1.5 1440
1220 1334 200
13400
(7.9")
13400
11100
11100
1.5 1440
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
54
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
DOUBLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. • 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
200 MM (7.9") WHEELS, 60#-80# RAIL For Spans Thru (ft.-in.)
Wheel Base (ft.-in.)
Gage (ft.-in.)
52-6
7-6
63-0
9-0
5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6 5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6
60-0
10-0
52-6
7-6
63-0
9-0
60-0
10-0
ASCE Rail
60#
80#
Catalog Number 200TD105LE*15 200TD105PE*15 200TD105PF*15 200TD105PG*15 200TD105PG*15 200TD105TE*15 200TD105TF*15 200TD105TG*15 200TD105TJ*15 200TD105TK*15 200TD105TL*15 200TD105LE*15 200TD105PE*15 200TD105PF*15 200TD105PG*15 200TD105PG*15 200TD105TE*15 200TD105TF*15 200TD105TG*15 200TD105TJ*15 200TD105TK*15 200TD105TL*15
Max. Allowable DURABILITY Wheel Load (lbs), Pe
Wheel Diameter mm (in.)
Cast Iron Wheels Class C
Class D
Bronze Wheels - 225 Bhn Class C
Class D
HP Each Motor
Weight with Gearmotors (lbs.) 1220 1334
200
18800
(7.9")
18800
15500
15500
1.5 1440
1220 1334 200
20100
(7.9")
20100
16600
16600
1.5 1440
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
55
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
DOUBLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. • 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
260 MM (10.2") WHEELS, 30#-80# RAIL WITH 2 HP MOTOR (100 FPM) For Spans Thru (ft.-in.) 63-0
Wheel Base (ft.-in.)
9-0
70-0
10-0
63-0
9-0
70-0
10-0
63-0
9-0
70-0
10-0
63-0
9-0
70-0
10-0
Gage (ft.-in.)
ASCE Rail
5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0 5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0 5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0 5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0
30#
40#
60#
80#
Catalog Number 260TD040PE*20 260TD040PF*20 260TD040PG*20 260TD040TE*20 260TD040TF*20 260TD040TG*20 260TD040TJ*20 260TD040TK*20 260TD040PE*20 260TD040PF*20 260TD040PG*20 260TD040TE*20 260TD040TF*20 260TD040TG*20 260TD040TJ*20 260TD040TK*20 260TD105PE*20 260TD105PF*20 260TD105PG*20 260TD105TE*20 260TD105TF*20 260TD105TG*20 260TD105TJ*20 260TD105TK*20 260TD105PE*20 260TD105PF*20 260TD105PG*20 260TD105TE*20 260TD105TF*20 260TD105TG*20 260TD105TJ*20 260TD105TK*20
Max. Allowable DURABILITY Wheel Load (lbs), Pe
Wheel Diameter mm (in.)
Cast Iron Wheels Class C
Class D
Bronze Wheels - 225 Bhn Class C
Class D
HP Each Motor
Weight with Gearmotors (lbs.) 1828
260
14800
(10.2")
14800
12200
12200
2 1954
1828 260
17400
(10.2")
17400
14400
14400
2 1954
1828 260
24400
(10.2")
24400
20200
20200
2 1954
1828 260
26200
(10.2")
26200
21600
21600
2 1954
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
56
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
DOUBLE GIRDER TOP RUNNING END TRUCKS DURABILITY WHEEL LOAD CHART • The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. • All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. • All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. • 115 mm end trucks are not suitable for operation on square bar. • Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life for Class C service and 10,000 hours of L-10 life for Class D service. • Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74. • Gear motors are 30 minute rated for both Class C & D applications. 60 minute motors are priced upon application. Per CMAA 5.2.7, Time rating depends on analysis of actual service requirements.
260 MM (10.2") WHEELS, 30#-80# RAIL WITH 3 HP MOTOR (150 FPM) For Spans Thru (ft.-in.) 63-0
Wheel Base (ft.-in.)
9-0
70-0
10-0
63-0
9-0
70-0
10-0
63-0
9-0
70-0
10-0
63-0
9-0
70-0
10-0
Gage (ft.-in.)
ASCE Rail
5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0 5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0 5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0 5-0 5-6 6-0 5-0 5-6 6-0 6-6 7-0
30#
40#
60#
80#
Catalog Number 260TD040PE*30 260TD040PF*30 260TD040PG*30 260TD040TE*30 260TD040TF*30 260TD040TG*30 260TD040TJ*30 260TD040TK*30 260TD040PE*30 260TD040PF*30 260TD040PG*30 260TD040TE*30 260TD040TF*30 260TD040TG*30 260TD040TJ*30 260TD040TK*30 260TD105PE*30 260TD105PF*30 260TD105PG*30 260TD105TE*30 260TD105TF*30 260TD105TG*30 260TD105TJ*30 260TD105TK*30 260TD105PE*30 260TD105PF*30 260TD105PG*30 260TD105TE*30 260TD105TF*30 260TD105TG*30 260TD105TJ*30 260TD105TK*30
Max. Allowable DURABILITY Wheel Load (lbs), Pe
Wheel Diameter mm (in.)
Cast Iron Wheels Class C
Class D
Bronze Wheels - 225 Bhn Class C
Class D
HP Each Motor
Weight with Gearmotors (lbs.) 1842
260
14800
(10.2")
14800
12200
12200
3 1938
1842 260
17400
(10.2")
17400
14400
14400
3 1938
1842 260
24400
(10.2")
24400
20200
20200
3 1938
1842 260
26200
(10.2")
26200
21600
21600
3 1938
The Maximum Actual Wheel Load, P is calculated using the actual dead loads and live loads due to the crane and hoist and shall not exceed the Maximum Allowable Wheel Loads listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Values have been estimated based on end trucks being used as part of "plug & play" crane kits including Global King or World Series wire rope hoist built to FEM 2m / ASME H4 minimum design.
ALLOWABLE BENDING MOMENT 115 mm = 332,000#/in 160 mm = 534,000#/in
Verification of all truck selections using the CMCO CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
200 mm = 917,000#/in
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50
260 mm = 1,187,000#/in
57
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS
115 [4.5"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
NOTE: NOT FOR USE ON BAR STOCK
Truck & Drive Catalog Number
A Wheelbase (ft-in)
115TS040D*07
4-6
115TS040H*07
6-3
115TS040L*07
7-6
Rail
25 - 40#
Dimensions shown are maximum, for estimating purposes only. * Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
58
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS SINGLE GIRDER TOP RUNNING 160 [6.3"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheelbase (ft-in)
160TS040D*10
4-6
160TS040H*10
6-3
160TS040L*10
7-6
160TS105D*10
4-6
160TS105H*10
6-3
160TS105L*10
7-6
Rail
25 - 40#
60 - 105#
Dimensions shown are maximum, for estimating purposes only. * Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
59
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS SINGLE GIRDER TOP RUNNING 200 [7.9"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheelbase (ft-in)
200TS040D*15
4-6
200TS040H*15
6-3
200TS040L*15
7-6
200TS105D*15
4-6
200TS105H*15
6-3
200TS105L*15
7-6
Rail
25 - 40#
60 - 105#
Dimensions shown are maximum, for estimating purposes only. * Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
60
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS SINGLE GIRDER TOP RUNNING 260 [10.2"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheelbase (ft-in)
260TS040D*20
4-6
260TS040H*20
6-3
260TS040L*20
7-6
260TS105D*20
4-6
260TS105H*20
6-3
260TS105L*20
7-6
Rail
Maximum Bridge Speed
25 - 40# 100 fpm 2 HP Drives 60 - 105#
Dimensions shown are maximum, for estimating purposes only. * Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
61
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS SINGLE GIRDER TOP RUNNING 260 [10.2"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheelbase (ft-in)
260TS040D*30
4-6
260TS040H*30
6-3
260TS040L*30
7-6
260TS105D*30
4-6
260TS105H*30
6-3
260TS105L*30
7-6
Rail
Maximum Bridge Speed
25 - 40# 150 fpm 3 HP Drives 60 - 105#
Dimensions shown are maximum, for estimating purposes only. * Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
62
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING END TRUCKS The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life. Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74, dated 2004. 160 mm (6.3") Wheels - 30 - 40# Rail For Spans Thru (ft-in)
Wheel Base (ft-in)
52 - 6
7-6
63 - 0
9-0
Gage (ft-in)
ASCE Rail
Max. Allowable Max. Allowable Durability Wheel Load Durability Wheel Lod (lbs), Pe - Bronze (lbs), Pe - Cast Iron Wheels Wheels 225 Bhn
Catalog Number
4-6
160TD040LD*10
5-0
160TD040LE*10
4-6
160TD040PD*10
5-0
160TD040PE*10
5-6
160TD040PF*10
6-0
160TD040PG*10
6-6 4-6
30#
9100
52 - 6
63 - 0
10 - 0
7-6
9-0
160TD040TF*10 160TD040TG*10
6-6
160TD040TJ*10
7-0
160TD040TK*10
7-6
160TD040TL*10
4-6
160TD040LD*10
5-0
160TD040LE*10
4-6
160TD040PD*10
5-0
160TD040PE*10
5-6
160TD040PF*10
6-0
160TD040PG*10 40#
10700
10 - 0
1018
1 858
954
160TD040PJ*10
8900
160TD040TD*10
5-0 70 - 0
954
160TD040TE*10
6-0
4-6
858
160TD040TD*10
5-6
6-6
Wt. with Gearmotors (lbs)
160TD040PJ*10
7500
5-0 70 - 0
HP each Motor
160TD040TE*10
5-6
160TD040TF*10
6-0
160TD040TG*10
6-6
160TD040TJ*10
7-0
160TD040TK*10
7-6
160TD040TL*10
Table Actual Wheel Load Notes:
1018
Allowable Bending Moment
The Maximum Equivalent Durability Wheel Load, Pe is calculated by adjusting the maximum actual wheel load, P, with the bridge wheel load service coefficient, Kwl as specified in CMAA Specification #70, 2004. Pe shall not exceed the maximum allowable durability wheel load listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Verification of all truck selections using the CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
63
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING END TRUCKS The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life. Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74, dated 2004. 160 mm (6.3”) Wheels - 60 - 80# Rail
For Spans Thru (ft-in)
Wheel Base (ft-in)
52 - 6
7-6
63 - 0
9-0
Gage (ft-in)
ASCE Rail
Max. Allowable Durability Wheel Lod (lbs), Pe - Cast Iron Wheels
Max. Allowable Durability Wheel Load (lbs), Pe - Bronze Wheels 225 Bhn
4-6
160TD105LD*10
5-0
160TD105LE*10
4-6
160TD105PD*10
5-0
160TD105PE*10
5-6
160TD105PF*10
6-0
160TD105PG*10
6-6 4-6
60#
11500
52 - 6
63 - 0
10 - 0
7-6
9-0
160TD105TF*10 160TD105TG*10
6-6
160TD105TJ*10
7-0
160TD105TK*10
7-6
160TD105TL*10
4-6
160TD105LD*10
5-0
160TD105LE*10
4-6
160TD105PD*10
5-0
160TD105PE*10
5-6
160TD105PF*10
6-0
160TD105PG*10 80#
11500
10 - 0
954
1018
1 858
954
160TD105PJ*10
11500
160TD105TD*10
5-0 70 - 0
858
160TD105TE*10
6-0
4-6
Wt. with Gearmotors (lbs)
160TD105TD*10
5-6
6-6
HP each Motor
160TD105PJ*10
11500
5-0 70 - 0
Catalog Number
160TD105TE*10
5-6
160TD105TF*10
6-0
160TD105TG*10
6-6
160TD105TJ*10
7-0
160TD105TK*10
7-6
160TD105TL*10
Table Actual Wheel Load Notes:
1018
Allowable Bending Moment
The Maximum Equivalent Durability Wheel Load, Pe is calculated by adjusting the maximum actual wheel load, P, with the bridge wheel load service coefficient, Kwl as specified in CMAA Specification #70, 2004. Pe shall not exceed the maximum allowable durability wheel load listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Verification of all truck selections using the CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
64
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING END TRUCKS The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life. Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74, dated 2004. 200 mm (7.9”) Wheels - 30 - 40# Rail
Max. Allowable Max. Allowable Durability Wheel Lod Durability Wheel Load (lbs), Pe - Cast Iron (lbs), Pe - Bronze Wheels Wheels 225 Bhn
For Spans Thru (ft-in)
Wheel Base (ft-in)
Gage (ft-in)
52 - 6
7-6
5-0
200TD040LE*15
5-0
200TD040PE*15
63 - 0
9-0
ASCE Rail
5-6
200TD040PF*15
6-0
200TD040PG*15
6-6 5-0
70 - 0
52 - 6
63 - 0
10 - 0
7-6
9-0
11400
10 - 0
Wt. with Gearmotors (lbs)
1220 1334
200TD040TE*15
9400
5-6
200TD040TF*15
6-0
200TD040TG*15
6-6
200TD040TJ*15
7-0
200TD040TK*15
7-6
200TD040TL*15
5-0
200TD040LE*15
5-0
200TD040PE*15
5-6
200TD040PF*15
6-0
200TD040PG*15
5-0
HP each Motor
200TD040PJ*15 30#
6-6
70 - 0
Catalog Number
1440
1.5
1220 1334
200TD040PJ*15 40#
13400
11100
200TD040TE*15
5-6
200TD040TF*15
6-0
200TD040TG*15
6-6
200TD040TJ*15
7-0
200TD040TK*15
7-6
200TD040TL*15
Table Actual Wheel Load Notes:
1440
Allowable Bending Moment
The Maximum Equivalent Durability Wheel Load, Pe is calculated by adjusting the maximum actual wheel load, P, with the bridge wheel load service coefficient, Kwl as specified in CMAA Specification #70, 2004. Pe shall not exceed the maximum allowable durability wheel load listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Verification of all truck selections using the CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
65
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING END TRUCKS The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life. Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74, dated 2004. 200 mm (7.9”) Wheels - 60 - 80# Rail
Max. Allowable Max. Allowable Durability Wheel Lod Durability Wheel Load (lbs), Pe - Cast Iron (lbs), Pe - Bronze Wheels Wheels 225 Bhn
For Spans Thru (ft-in)
Wheel Base (ft-in)
Gage (ft-in)
52 - 6
7-6
5-0
200TD105LE*15
5-0
200TD105PE*15
63 - 0
9-0
ASCE Rail
5-6
200TD105PF*15
6-0
200TD105PG*15
6-6 5-0
70 - 0
52 - 6
63 - 0
10 - 0
7-6
9-0
18800
15500
10 - 0
Wt. with Gearmotors (lbs)
1220
1334
200TD105TE*15
5-6
200TD105TF*15
6-0
200TD105TG*15
6-6
200TD105TJ*15
7-0
200TD105TK*15
7-6
200TD105TL*15
5-0
200TD105LE*15
5-0
200TD105PE*15
5-6
200TD105PF*15
6-0
200TD105PG*15
5-0
HP each Motor
200TD105PJ*15 60#
6-6
70 - 0
Catalog Number
1440
1.5
1220
1334
200TD105PJ*15 80#
20100
16600
200TD105TE*15
5-6
200TD105TF*15
6-0
200TD105TG*15
6-6
200TD105TJ*15
7-0
200TD105TK*15
7-6
200TD105TL*15
Table Actual Wheel Load Notes:
1440
Allowable Bending Moment
The Maximum Equivalent Durability Wheel Load, Pe is calculated by adjusting the maximum actual wheel load, P, with the bridge wheel load service coefficient, Kwl as specified in CMAA Specification #70, 2004. Pe shall not exceed the maximum allowable durability wheel load listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Verification of all truck selections using the CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
66
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING END TRUCKS The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life. Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74, dated 2004. 260 mm (10.2”) Wheels - 30 - 80# Rail with 2 HP Motor (100 fpm)
For Spans Thru (ft-in)
Wheel Base (ft-in)
63 - 0
9-0
Gage (ft-in)
ASCE Rail
Max. Allowable Durability Wheel Lod (lbs), Pe - Cast Iron Wheels
Max. Allowable Durability Wheel Load (lbs), Pe - Bronze Wheels 225 Bhn
5-0
260TD040PF*20
6-0
260TD040PG*20
5-6
63 - 0
10 - 0
9-0
63 - 0
10 - 0
9-0
7-0
260TD040TK*20
5-0
260TD040PE*20
5-6
260TD040PF*20
6-0
260TD040PG*20
63 - 0
10 - 0
9-0
260TD040TJ*20
7-0
260TD040TK*20
5-0
260TD105PE*20
5-6
260TD105PF*20
6-0
260TD105PG*20 24400
6-6
260TD105TJ*20
7-0
260TD105TK*20
5-0
260TD105PE*20
5-6
260TD105PF*20
6-0
260TD105PG*20
1828
1924
1828
260TD105TE*20
21600
260TD105TF*20
6-0
260TD105TG*20
6-6
260TD105TJ*20
7-0
260TD105TK*20
Table Actual Wheel Load Notes:
2
260TD105TF*20 260TD105TG*20
26200
1924
260TD105TE*20
20200
6-0
80#
1828
260TD040TF*20
6-6
60#
1924
260TD040TE*20
14400
260TD040TG*20
5-6 10 - 0
17400
6-0
5-0 70 - 0
40#
1828
260TD040TF*20 260TD040TJ*20
5-6
Wt. with Gearmotors (lbs)
260TD040TE*20
12200
6-6
5-0 70 - 0
14800
260TD040TG*20
5-6 70 - 0
30#
6-0
5-0
HP each Motor
260TD040PE*20
5-6 5-0
70 - 0
Catalog Number
1924
Allowable Bending Moment
The Maximum Equivalent Durability Wheel Load, Pe is calculated by adjusting the maximum actual wheel load, P, with the bridge wheel load service coefficient, Kwl as specified in CMAA Specification #70, 2004. Pe shall not exceed the maximum allowable durability wheel load listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Verification of all truck selections using the CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
67
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING END TRUCKS The truck frame is manufactured from a single piece of ASTM A500 rectangular tube for maximum strength and minimum width. All trucks are provided with bolt on rail sweeps for ease of serviceability and cylindrical rubber bumpers mounted as standard. All wheels are flat tread design. Cast iron wheels are hardened to 300 - 350 BHN. Bronze wheels are 225 BHN. Wheels are suitable for operation on ASCE rail as standard. For square bar applications using 160 mm, 200 mm or 260 mm end trucks, please contact factory for pricing. 115 mm end trucks are not suitable for operation on square bar. Wheel bearings provide a minimum of 5,000 hours of L-10 bearing life. Maximum wheel load and bearing life are determined in accordance with CMAA Specification No. 74, dated 2004. 260 mm (10.2”) Wheels - 30 - 80# Rail with 3 HP Motor (150 fpm)
For Spans Thru (ft-in)
Wheel Base (ft-in)
63 - 0
9-0
Gage (ft-in)
ASCE Rail
Max. Allowable Durability Wheel Lod (lbs), Pe - Cast Iron Wheels
Max. Allowable Durability Wheel Load (lbs), Pe - Bronze Wheels 225 Bhn
5-0
260TD040PF*30
6-0
260TD040PG*30
5-6
63 - 0
10 - 0
9-0
63 - 0
10 - 0
9-0
7-0
260TD040TK*30
5-0
260TD040PE*30
5-6
260TD040PF*30
6-0
260TD040PG*30
63 - 0
10 - 0
9-0
260TD040TJ*30
7-0
260TD040TK*30
5-0
260TD105PE*30
5-6
260TD105PF*30
6-0
260TD105PG*30 24400
6-6
260TD105TJ*30
7-0
260TD105TK*30
5-0
260TD105PE*30
5-6
260TD105PF*30
6-0
260TD105PG*30
1842
1938
1842
260TD105TE*30
21600
260TD105TF*30
6-0
260TD105TG*30
6-6
260TD105TJ*30
7-0
260TD105TK*30
Table Actual Wheel Load Notes:
3
260TD105TF*30 260TD105TG*30
26200
1938
260TD105TE*30
20200
6-0
80#
1842
260TD040TF*30
6-6
60#
1938
260TD040TE*30
14400
260TD040TG*30
5-6 10 - 0
17400
6-0
5-0 70 - 0
40#
1842
260TD040TF*30 260TD040TJ*30
5-6
Wt. with Gearmotors (lbs)
260TD040TE*30
12200
6-6
5-0 70 - 0
14800
260TD040TG*30
5-6 70 - 0
30#
6-0
5-0
HP each Motor
260TD040PE*30
5-6 5-0
70 - 0
Catalog Number
1938
Allowable Bending Moment
The Maximum Equivalent Durability Wheel Load, Pe is calculated by adjusting the maximum actual wheel load, P, with the bridge wheel load service coefficient, Kwl as specified in CMAA Specification #70, 2004. Pe shall not exceed the maximum allowable durability wheel load listed in the table. In some cases values in the table have been adjusted due to bearing life and bending moment considerations. Verification of all truck selections using the CRANE ESTIMATOR is recommended to ensure optimum truck model for your specific application.
68
115 mm
=
332,000#/in
160 mm
=
534,000#/in
200 mm
=
917,000#/in
260 mm
=
1,187,000#/in
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING 160 [6.3"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheel Base (ft-in)
Gage (ft-in)
160TD040LD*10 160TD040LE*10 160TD040PD*10 160TD040PE*10 160TD040PF*10 160TD040PG*10 160TD040PJ*10 160TD040TD*10 160TD040TE*10 160TD040TF*10 160TD040TG*10 160TD040TJ*10 160TD040TK*10 160TD040TL*10 160TD105LD*10 160TD105LE*10 160TD105PD*10 160TD105PE*10 160TD105PF*10 160TD105PG*10 160TD105PJ*10 160TD105TD*10 160TD105TE*10 160TD105TF*10 160TD105TG*10 160TD105TJ*10 160TD105TK*10 160TD105TL*10
7-6 7-6 9-0 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 7-6 7-6 9-0 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0
4-6 5-0 4-6 5-0 5-6 6-0 6-6 4-6 5-0 5-6 6-0 6-6 7-0 7-6 4-6 5-0 4-6 5-0 5-6 6-0 6-6 4-6 5-0 5-6 6-0 6-6 7-0 7-6
Rail
Dimensions shown are maximum, for estimating purposes only.
Drive HP
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
25 - 40#
1
60 - 105#
69
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING 200 [7.9"] WHEEL END TRUCK DIMENSIONS METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheel Base (ft-in)
Gage (ft-in)
200TD040LE*15 200TD040PE*15 200TD040PF*15 200TD040PG*15 200TD040PJ*15 200TD040TE*15 200TD040TF*15 200TD040TG*15 200TD040TJ*15 200TD040TK*15 200TD040TL*15 200TD105LE*15 200TD105PE*15 200TD105PF*15 200TD105PG*15 200TD105PJ*15 200TD105TE*15 200TD105TF*15 200TD105TG*15 200TD105TJ*15 200TD105TK*15 200TD105TL*15
7-6 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 7-6 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0
5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6 5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6
Rail
Dimensions shown are maximum, for estimating purposes only.
Drive HP
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
25 - 40#
1.5
60 - 105#
70
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING 260 [10.2"] WHEEL END TRUCK DIMENSIONS WITH 2 HP GEAR MOTOR METRIC-MM [INCH]
Truck & Drive Catalog Number
A Wheel Base (ft-in)
Gage (ft-in)
260TD040LE*20 260TD040PE*20 260TD040PF*20 260TD040PG*20 260TD040PJ*20 260TD040TE*20 260TD040TF*20 260TD040TG*20 260TD040TJ*20 260TD040TK*20 260TD040TL*20 260TD105LE*20 260TD105PE*20 260TD105PF*20 260TD105PG*20 260TD105PJ*20 260TD105TE*20 260TD105TF*20 260TD105TG*20 260TD105TJ*20 260TD105TK*20 260TD105TL*20
7-6 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 7-6 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0
5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6 5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6
Rail
Dimensions shown are maximum, for estimating purposes only.
Drive HP
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
25 - 40#
2
60 - 105#
71
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS DOUBLE GIRDER TOP RUNNING 260 [10.2"] WHEEL END TRUCK DIMENSIONS WITH 3 HP GEAR MOTOR METRIC-MM [INCH]
Dimensions shown are maximum, for estimating purposes only.
Truck & Drive Catalog Number
A Wheel Base (ft-in)
Gage (ft-in)
260TD040LE*30 260TD040PE*30 260TD040PF*30 260TD040PG*30 260TD040PJ*30 260TD040TE*30 260TD040TF*30 260TD040TG*30 260TD040TJ*30 260TD040TK*30 260TD040TL*30 260TD105LE*30 260TD105PE*30 260TD105PF*30 260TD105PG*30 260TD105PJ*30 260TD105TE*30 260TD105TF*30 260TD105TG*30 260TD105TJ*30 260TD105TK*30 260TD105TL*30
7-6 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 7-6 9-0 9-0 9-0 9-0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0 10 - 0
5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6 5-0 5-0 5-6 6-0 6-6 5-0 5-6 6-0 6-6 7-0 7-6
Rail
Drive HP
* Power Supply • 1 = 200/3/60 • 2 = 208/3/60 • 3 = 230/3/60 • 4 = 460/3/60 • 5 = 575/3/60 • 6 = 380/3/50 **Float not included, CMAA recommends ¾" - 1"
25 - 40#
3
60 - 105#
72
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS STANDARD (NON-PLUG & PLAY) NEMA 4/12 VARIABLE FREQUENCY CONTROL PANELS The control panel includes mainline contactor, in-door manual disconnect, 115-volt control circuit with fused secondary, terminal strip, bridge fusing. Controls are housed in a NEMA 4/12 panel hinged horizontal at the bottom. Push-button is not included. The mainline contactor and disconnect are rated for 30 amps in panels through 5 hp and 60 amps in panels rated for 7.5-10 hp. The control transformers are rated for 300 VA in all panels.
NEMA 4/12 Non-Plug & Play VFD Control Panels - Electromotive VFD For Max. total H.P.
Volts
Drive Size
2 3 5
Catalog Number 452314-12 452314-13
200 volts
452314-15
7.5
452313-17
2
452314-22
3 5
230 volts
G+ Mini
452314-23 452314-25
7.5
452313-27
2
452314-42
3
452314-43
5 7.5
380 to 460 volts
452314-45
Panel Dimensions (in)
Weight
A
B
C
80
20
16
8.5
105
24
20
10.5
80
20
16
8.5
105
24
20
10.5
80
20
16
8.5
105
24
20
10.5
452313-47
73
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE COMPONENTS BUMPERS FOR SINGLE OR DOUBLE GIRDER, TOP RUNNING, ROTATING AXLE END TRUCKS STANDARD AND OPTIONAL RUBBER BUMPER SIZES Rotating axle trucks include a default bumper in the price for the most common application's, however, it is recommended that you verify the suitability of the default bumper for your specific application. This can be accomplished by referring to the following information on pages 32-34. ROTATING AXLE TOP-RUNNING TRUCKS Truck Wheel Diameter mm (in)
Application
Default Bumper
Available Bumpers
115 (4.5)
Single Girder
R1
R1, R2, SPEC
115 (4.5)
Double Girder
R1
R1, R2, SPEC
160 (6.3)
Single Girder
R2
R1, R2, R3, SPEC
160 (6.3)
Double Girder
R3
R2, R3, SPEC
200 (7.9)
Single Girder
R3
R2, R3, R4, SPEC
200 (7.9)
Double Girder
R4
R3, R4, R5, SPEC
260 (10.2)
Single Girder
R3
R3, R4, SPEC
260 (10.2)
Double Girder
R4
R3, R4, R5, SPEC
BUMPER DIMENSIONS
Bumper
E.A.C.
Dia. (in)
Length (in)
"D"
R1
38
1.6
1.38
1.3
R2
75
2.0
1.68
1.6
R3
145
2.5
2.12
2.0
R4
290
3.2
2.62
2.5
R5
578
4.0
3.36
3.2
R6
1155
5.0
4.16
4.0
R7
2310
6.4
5.24
5.0
R8
4550
8.0
6.64
6.4
"E" 0.08
0.12
0.16
0.24
Dimensions: “C” is the Diameter “D” is the Bumper Length “E” is the Base Plate
74
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS
DETERMINATION OF BUMPER SIZES When determining the size of a bumper for a crane, trolley, hoist or other moving equipment, the magnitude of the energy to be stopped, expressed in foot-pounds (ft.lbs.) must be established. This energy is a function of the weight of the equipment and the travel speed at which impact occurs, expressed in ft. - lbs. The second consideration is the deceleration, expressed in ft./sec.2 OSHA (spec. 1910/179), CMAA (spec. NO70, as amended) and other agencies have established MINIMUM guidelines for decelerating and stopping cranes. They are:
ENERGY CALCULATION FOR BRIDGE
FOR THE CRANE BRIDGE: OSHA The bumpers, usually two, must be large enough to absorb the impact energy (ft.-lbs.) at 40% of full speed. Deceleration must not exceed 3.0 ft. sec.2 at 20% of full speed. You may decide that this minimum protection is not sufficient for your equipment and substitute CMAA or your own higher speed values. The following steps to determine bumper size in conjunction with our energy absorption, deflection and maximum force curves will allow you to calculate bumper size. The final force curve will show you the load imposed upon your structure to which the bumper is mounted. S = Traveling bridge span in feet. D = Load to support distance in feet. VB = Maximum traveling bridge speed in feet per minute WB = Bridge only weight WT = Trolley & Hoist only weight
DETERMINATION OF TRAVELING BRIDGE BUMPER SIZE (OSHA) 1. D etermine the traveling bridge weight less load (WB), and trolley weight (WT) in pounds from manufacturers specifications. 2. With the trolley against its stops at the end of the traveling bridge, determine the minimum distance (D) in feet from the center of gravity of the trolley to the centers of the traveling bridge bumpers. Use manufacturers specifications if available. 3. Determine the distance (S) in feet between the traveling bridge bumpers. 4. Determine the traveling bridge maximum speed (VB) in feet per minute from manufacturers specifications. 5. Determine the traveling bridge energy (BE) at impact at 40% of full speed by using.
BE 40% =BE =
(0.4 x VB)2 231840
x
[ ] WB 2
+ WT —
WT x D
= ft.-lbs.
S
6. S elect a bumper (from the bumper dimension chart on page 70) with an energy absorption capacity (E.A.C) equal or greater than BE calculated in Step 5.
75
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS 7. In a similar manner calculate the energy (ft.-lbs.) at 20% full speed.
BE 20% BE = =
(0.2 x VB)2 231840
x
[ ] WB
+ WT —
WT x D
2
= ft.-lbs.
S
With your calculated energy absorption requirement (ft.-lbs.), from step 7, enter the diagram’s left upper corner on a line which represents the chosen bumper size. Interpolate and pinpoint the energy requirement "BE" on this line and draw a vertical line down until you intersect the curve in the left diagram. From this intersection draw a horizontal line to the left and to the right. Where the left line intersects with the chosen bumper line the deflection (DE in inches) for your deceleration calculation is shown. Where the line intersects with the curve in the right diagram draw another line straight up until you again intersect with your chosen bumper (size) line. You can read your maximum force on the point of intersection, (tonnes) at 20%. Proceed: 1 - 2 - 3
METRIC TONS
DE
BE
DECELERATION REQUIREMENT FOR BRIDGE (OSHA)
8. Determine deceleration (a) by using:
a=
(0.2 x VB)2
= ft.sec.2
600 x DE DE (deflection) in inches will be found on the deflection scale of the maximum force diagram for the bumper selected in step 6 and the energy absorption determined in step 7. The result of this calculation must be 3.0 ft. sec.2 or less.
76
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE COMPONENTS
ESTIMATED GIRDER SELECTIONS FOR SINGLE GIRDER AND DOUBLE GIRDER TOP-RUNNING CRANES
SPECIFICATIONS FOR INDIVIDUAL DRIVES US TONS METRIC TONS
77
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION SINGLE GIRDER TOP RUNNING & UNDERHUNG MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS AND METRIC TONS BASED ON 40' LIFT FOR 1 TON AND 20' LIFT FOR 2 AND 3 TON WORLD SERIES & GLOBAL KING HOISTS All data based on 25' lift hoists and dead weights as shown for 5-15 ton World Series & Global King hoists The following girder selection charts were developed based on the following assumptions; 1. Section designation is in accordance with AISC. 2. Beam sizes listed are American wide flange (W) and channel (C) sections. 3. Use ASTM A572 grade 50 steel, first quality, free of rust and excessive mill scale 4. The bridge is designed in accordance with CMAA Specification 74, revised 2000 and is based on the following assumptions:
US TONS
METRIC TONS
Rated Load (tons)
Hoist plus Trolley Dead Load (lbs)
Trolley Wheel Diameter (in)
Allowable Flange Width (in)
Maximum Allowable Flange Thickness (in)
Rated Load (metric tons)
Hoist plus Trolley Dead Load (kg)
Trolley Wheel Diameter (mm)
Allowable Flange Width (mm)
Maximum Allowable Flange Thickness (mm)
1
625
3-3/4
4-5/8 - 14
1-1/8
1
284
95
118 - 355
29
2
700
3-3/4
4-5/8 - 14
1-1/8
2
318
95
118 - 355
29
3
700
3-3/4
4-5/8 - 14
1-1/8
3
318
95
118 - 355
29
5
900
4
4-5/8 - 20
1-5/8
5
409
102
117 - 508
41
7½
1750
6
6 - 20
1-5/8
7½
794
152
152 - 508
41
10
1750
6
6 - 20
1-5/8
10
794
152
152 - 508
41
15
2830
7
8 - 20
1-3/4
15
1284
177
203 - 508
45
DLFB, DLFT, HLF and IFD are assumed to be 1.1, 1.1, .15 and .1 respectively Assumed additional dead load (for cross conductors) is 10 lbs./ft. (4.5 kg/ft) The bridge is assumed to be an indoor bridge 5. If any of the above assumptions are exceeded, contact the factory for beam selection. 6. No additional loading such as footwalks, platforms, cabs, machinery, etc., is allowed. 7. Beam substitution is allowed by going to an increased span, but not by going to an increased load.
78
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION SINGLE GIRDER TOP RUNNING & UNDERHUNG MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS Span Thru (ft)
WF Section
WF Section
Span Thru (ft)
WF Section
WF Section
WF Section
WF Section
2 ton Rated Load with 20' Lift Hoist
1 ton Rated Load with 40' Lift Hoist 20
W10X30
W12X30
W10X33
20
W10X26
W12X26
W14X26
22
W14X34
W12X35
W16X36
22
W10X26
W12X26
W10X30
24
W12X35
W14X38
W12X40
24
W10X30
W12X30
W14X30
26
W12X40
W14X43
W12X45
26
W10X30
W12X30
W10X33
28
W14X43
W12X45
W14X48
28
W12X35
W14X38
W10X39
30
W14X48
W12X50
W16X50
30
W12X35
W14X38
W12X40
32
W14X48
W14X53
W18X55
32
W12X40
W14X43
W12X45
34
W14X53
W18X60
W14X61
34
W12X40
W14X43
W12X45
36
W14X61
W18X65
W16X67
36
W14X43
W14X48
W12X50
38
W16X67
W14X68
W18X71
38
W14X48
W12X53
W14X53
40
W16X67
W14X74
W18X76
40
W14X53
W16X57
W18X60
42
W16X67
W18X76
W16X77
42
W14X53
W14X61
W18X65
44
W18X76
W16X77
W18X86
44
W14X61
W16X67
W14X68
46
W18X76
W16X77
W18X86
46
W16X67
W14X68
W14X74
48
W18X86
W16X89
W18X97
48
W16X67
W18X76
W16X77
50
W18X86
W18X97
W16X100
50
W16X67
vW18X76
W16X77
52
W18X97
W21X101
W24X104
52
W18X76
W16X77
W18X86
54
W18X97
W21X101
W24X104
54
W18X76
W18X86
W16X89
56
W21X101
W21X111
W24X117
56
W18X86
W18X97
W16X100
58
W21X111
W24X117
W21X122
58
W18X86
W18X97
W21X101
60
W21X111
W24X117
W21X122
60
W18X97
W21X101
W24X104
3 ton Rated Load with 20' Lift Hoist 20
W12X35
W14X38
W12X40
22
W12X40
W14X43
W12X45
24
W14X43
W12X45
W16X45
26
W14X48
W12X50
W16X50
28
W14X48
W14X53
W18X55
30
W14X53
W18X60
W14X61
32
W14X61
W18X65
W16X67
34
W16X67
W14X68
W18X71
36
W16X67
W18X76
W16X77
38
W16X67
W18X76
W16X77
40
W18X76
W16X77
W18X86
42
W18X76
W18X86
W16X89
44
W18X86
W18X97
W16X100
46
W18X86
W18X97
W16X100
48
W18X97
W21X101
W24X104
50
W21X101
W24X104
W18X106
52
W21X101
W21X111
W24X117
54
W21X111
W24X117
W21X122
56
W21X122
W24X131
W21X132
58
W21X122
W24X131
W21X132
60
W24X131
W21X132
W24X146
79
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION SINGLE GIRDER TOP RUNNING & UNDERHUNG MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS Span Thru (ft)
WF Section
WF Section
Span Thru (ft)
WF Section
5 ton Rated Load with 25' Lift Hoist
WF Section
WF Section
WF Section
7½ ton Rated Load with 25' Lift Hoist
20
W16X50
W14X53
W18X55
20
W18X65
W21X68
W18X71
22
W14X53
W18X55
W16X57
22
W18X65
W18X71
W21X73
24
W16X57
W18X60
W21X62
24
W18X71
W21X73
W14X74
26
W18X65
W16X67
W14X68
26
W16X77
W21X83
W24X84
28
W16X67
W14X68
W18X71
28
W18X86
W16X89
W21X93
30
W18X76
W16X77
W14X82
30
W18X86
W16X89
W21X93
32
W18X76
W16X77
W21X83
32
W18X97
W16X100
W21X101
34
W18X76
W16X77
W18X86
34
W18X97
W21X101
W24X104
36
W18X86
W16X89
W18X97
36
W21X101
W24X104
W18X106
38
W18X86
W18X97
W16X100
38
W21X101
W21X111
W24X117
40
W18X97
W21X101
W24X104
40
W21X111
W24X117
W21X122
42
W18X97
W21X101
W24X104
42
W21X122
W24X131
W21X132
44
W21X101
W21X111
W24X117
44
W21X122
W24X131
W21X132
46
W21X111
W24X117
W21X122
46
W21X132
W24X146
W27X146
48
W21X111
W24X117
W21X122
48
W24X146
W27X146
W21X147
50
W21X122
W24X131
W21X132
50
W24X146
W27X146
W27X161
52
W24X131
W21X132
W24X146
52
W27X161
W24X162
W30X173
54
W24X146
W27X146
W21X147
54
W27X161
W24X162
W30X173
56
W24X146
W27X146
W21X147
56
W30X173
W24X176
W27X178
58
W24X146
W27X161
W24X162
58
W24X176
W27X178
W30X191
60
W27X161
W24X162
W30X173
60
W30X191
W24X192
W27X194
10 ton Rated Load with 25' Lift Hoist
15 ton Rated Load with 25' Lift Hoist
20
W21X83
W24X84
W16X89
20
W24X103
W18X119
W12X120
22
W21X83
W16X89
W21X93
22
W18X119
W27X129
W18X130
24
W16X89
W21X93
W24X94
24
W18X119
W27X129
W18X130
26
W21X93
W24X94
W18X97
26
W27X129
W18X130
W21X132
28
W16X100
W27X102
W24X103
28
W27X129
W18X130
W30X132
30
W18X106
W21X111
W27X114
30
W27X129
W18X130
W18X143
32
W18X106
W21X111
W24X117
32
W18X143
W24X146
W21X147
34
W24X117
W18X119
W21X122
34
W24X146
W21X147
W36X160
36
W21X122
W27X129
W18X130
36
W21X147
W27X161
W24X162
38
W21X122
W24X131
W21X132
38
W27X161
W24X162
W21X166
40
W24X131
W21X132
W24X146
40
W27X161
W24X162
W30X173
42
W24X146
W27X146
W21X147
42
W24X162
W30X173
W24X176
44
W24X146
W27X146
W27X161
44
W24X176
W27X178
W30X191
46
W27X161
W24X162
W21X166
46
W30X191
W24X192
W27X194
48
W27X161
W24X162
W30X173
48
W30X191
W27X194
W33X201
50
W24X162
W30X173
W24X176
50
W27X194
W30X211
W40X215
52
W24X176
W27X178
W30X191
52
W30X211
W27X217
W33X221
54
W30X191
W24X192
W27X194
54
W27X217
W27X235
W30X235
56
W30X191
W27X194
W33X201
56
W27X235
W30X235
W33X241
58
W27X194
W30X211
W40X215
58
W30X235
W40X244
W27X258
60
W30X211
W27X217
W33X221
60
W36X260
W30X261
W33X263
80
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION SINGLE GIRDER TOP RUNNING & UNDERHUNG MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR METRIC TONS
Span Thru (ft)
WF Section
WF Section
Span Thru (ft)
WF Section
1 metric tons Rated Load with 25' Lift Hoist
WF Section
WF Section
WF Section
2 metric tons Rated Load with 25' Lift Hoist
20
W10X26
W12X26
W8X28
20
W10X30
W12X30
W10X33
22
W10X26
W12X26
W10X30
22
W12X35
W14X38
W10X39
24
W10X30
W12X30
W10X33
24
W14X38
W12X40
W16X40
26
W10X30
W10X33
W14X34
26
W12X40
W14X43
W12X45
28
W12X35
W14X38
W10X39
28
W14X43
W12X45
W14X48
30
W12X40
W16X40
W14X43
30
W14X48
W12X53
W14X53
32
W12X40
W14X43
W12X45
32
W14X53
W16X57
W18X60
34
W14X43
W12X45
W14X48
34
W14X61
W18X65
W16X67
36
W14X48
W12X50
W12X53
36
W14X61
W18X65
W16X67
38
W14X48
W14X53
W16X57
38
W16X67
W18X71
W21X73
40
W14X53
W18X60
W14X61
40
W16X67
W18X76
W16X77
42
W14X61
W18X65
W16X67
42
W16X67
W18X76
W16X77
44
W16X67
W14X68
W18X71
44
W18X76
W16X77
W18X86
46
W16X67
W14X74
W18X76
46
W18X76
W18X86
W16X89
48
W16X67
W18X76
W16X77
48
W18X86
W18X97
W16X100
50
W16X67
W18X76
W16X77
50
W18X86
W18X97
W21X101
52
W18X76
W16X77
W18X86
52
W18X97
W21X101
W24X104
54
W18X86
W16X89
W18X97
54
W21X101
W24X104
W18X106
56
W18X86
W18X97
W16X100
56
W21X101
W21X111
W24X117
58
W18X86
W18X97
W21X101
58
W21X111
W24X117
W21X122
60
W18X97
W21X101
W24X104
60
W21X122
W24X131
W21X132
3 metric tons Rated Load with 25' Lift Hoist 20
W14X38
W16X40
W14X43
22
W14X43
W12X45
W16X45
24
W14X43
W12X45
W14X48
26
W14X48
W12X53
W14X53
28
W14X53
W16X57
W18X60
30
W14X61
W18X65
W16X67
32
W16X67
W14X68
W18X71
34
W16X67
W14X74
W18X76
36
W16X67
W18X76
W16X77
38
W18X76
W16X77
W18X86
40
W18X76
W16X77
W18X86
42
W18X86
W16X89
W18X97
44
W18X86
W18X97
W16X100
46
W18X97
W21X101
W24X104
48
W18X97
W21X101
W24X104
50
W21X101
W21X111
W24X117
52
W21X111
W24X117
W21X122
54
W21X111
W24X117
W21X122
56
W21X122
W24X131
W21X132
58
W21X122
W24X131
W21X132
60
W21X132
W24X146
W27X146
81
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS
ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS The following girder selection charts were developed based on the following assumptions; 1. Section designation is in accordance with AISC. 2. Beam sizes listed are American wide flange (W) and channel (C) sections. 3. Use ASTM A572 grade 50 steel, first quality, free of rust and excessive mill scale 4. The bridge is designed in accordance with CMAA Specification 74, revised 2000 and is based on the following assumptions:
US TONS Rated Load (tons)
METRIC TONS
Lift (ft)
Gage (in)
Hoist plus Trolley Dead Load (lbs)
25
54
1560
40
66
1680
Rated Load (metric tons)
5 25
60
2315
40
78
2535
25
60
2315
5 7.5
7½
10
10 40
78
2535
25
66
3310
40
78
3500
16' - 8"
66
3600
26' - 8"
78
3800
15 20
15
Lift (m)
Gage (mm)
Hoist plus Trolley Dead Load (kg) 708
7.62
1371.6
12.19
1676.4
762
7.62
1524
1050
12.19
1981.2
1150
7.62
1524
1050
12.19
1981.2
1150
7.62
1676.4
1501
12.19
1981.2
1588
5.08
1676.4
1633
8.13
1981.2
1724
20
DLFB, DLFT, HLF and IFD are assumed to be 1.1, 1.1, .15 and .1 respectively Assumed additional dead load (for cross conductors) is 10 lbs./ft. (4.5 kg/ft) The bridge is assumed to be an indoor bridge 5. If any of the above assumptions are exceeded, contact the factory for beam selection. 6. No additional loading such as footwalks, platforms, cabs, machinery, etc., is allowed. 7. Beam substitution is allowed by going to an increased span, but not by going to an increased load.
82
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS
ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS Span thru (ft)
(50 KSI) (50 KSI) (50 KSI) W W W 5 TON RATED LOAD 25'-0" LIFT W.S./G.K.
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
W12X35 W12X40 W12X45 W12X53 W14X48 W14X53 W14X61 W14X68 W16X67 W16X67 W16X77 W16X77 W16X89 W16X89 W16X100 W18X97
52
W18X106
54 56 58 60
Span thru (ft)
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
W12X40 W12X45 W14X43 W14X48 W14X61 W14X61 W14X68 W16X67 W16X67 W16X77 W16X89 W16X89 W16X100 W16X100 W18X97 W21X62 C12X20.7 W21X111 W18X119 W24X62 C15X33.9 W24X62 C15X33.9 W24X68 C15X33.9
W12X45 W14X43 W14X48 W14X53 W18X60 W16X67 W16X67 W16X77 W16X77 W18X76 W18X76 W18X86 W18X86 W18X97 W21X101 W18X106 W24X117 W21X122 W18X119 W24X131 W18X143
W14X43 W14X48 W16X50 W16X57 W18X65 W18X65 W18X71 W18X76 W18X76 W18X86 W18X86 W18X97 W18X97 W21X101 W24X104 W21X111 W24X55 C15X33.9 W24X55 C15X33.9 W21X122 W18X130 W24X146
(50 KSI) W
(50 KSI) W
(50 KSI) W
5 TON RATED LOAD 40'-0" LIFT W.S./G.K.
W21X111 W18X119 W18X119 W21X132
W12X40 W14X43 W14X43 W14X48 W14X53 W14X61 W14X68 W16X67 W18X76 W16X77 W18X76 W16X89 W18X86 W18X86 W18X97 W21X101 W21X62 C12X20.7 W24X117 W21X122 W21X122 W18X130
W16X40 W12X45 W14X48 W14X53 W16X57 W16X67 W16X67 W14X74 W14X74 W18X76 W18X86 W18X86 W18X97 W18X97 W21X101 W24X104
W24X55 C15X33.9 W24X55 C15X33.9 W24X55 C15X33.9 W24X55 C15X33.9
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
(50 KSI) W
(50 KSI) W
(50 KSI) W
Span thru (ft)
W21X111
7 1/2 TON RATED LOAD 25'-0" LIFT W.S./G.K. 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
W12X53 W14X48 W14X53 W14X61 W14X68 W16X67 W16X67 W16X77 W16X89 W16X89 W16X100 W18X97 W18X106 W18X106 W21X111 W21X122
W14X43 W14X53 W16X57 W16X67 W16X67 W16X77 W16X77 W18X76 W18X76 W18X86 W18X86 W21X101 W21X101 W21X101 W24X117 W18X130
W14X48 W18X55 W18X60 W18X65 W18X71 W18X76 W18X76 W18X86 W18X86 W18X97 W18X97 W24X104 W24X104 W21X111 W24X55 C15X33.9 W24X55 C15X33.9
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
7 1/2 TON RATED LOAD 40'-0" LIFT W.S./G.K. W12X50 W14X43 W14X48 W14X48 W14X53 W16X57 W14X53 W16X57 W18X60 W14X61 W16X67 W18X65 W14X68 W16X67 W18X71 W16X67 W16X77 W18X76 W16X67 W16X77 W18X76 W16X77 W18X76 W18X86 W16X89 W18X76 W18X86 W16X100 W18X86 W18X97 W16X100 W18X86 W18X97 W18X97 W21X101 W24X104 W18X106 W21X101 W24X104 W21X111 W24X117 W24X55 C15X33.9 W21X111 W24X117 W24X55 C15X33.9 W24X62 C15X33.9 W21X122 W18X130
52
W24X62 C15X33.9
W18X130
W24X131
52
W24X68 C15X33.9
W21X122
W24X131
54
W24X68 C15X33.9
W21X132
W24X131
54
W24X68 C15X33.9
W21X132
W18X143
56
W24X68 C15X33.9
W18X143
W24X146
56
W24X76 C15X33.9
W24X146
W27X146
58
W24X76 C15X33.9
W24X146
W27X146
58
W21X147
W24X146
W27X84 C15X33.9
60
W21X147
W27X161
W27X84 C15X33.9
60
W21X147
W27X161
W27X84 C15X33.9
83
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS
ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS Span thru (ft)
(50 KSI) (50 KSI) (50 KSI) W W W 10 TON RATED LOAD 25’-0” LIFT W.S./G.K.
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
10 TON RATED LOAD 40’-0” LIFT W.S./G.K.
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W14X53 W14X61 W14X68 W16X67 W16X67 W16X77 W16X89 W16X100 W16X100 W18X97 W18X106 W18X119 W21X111 W24X68 C15X33.9 W24X68 C15X33.9 W24X76 C15X33.9 W24X146 W24X146 W21X147 W24X162 W24X162
W16X57 W16X67 W16X67 W18X71 W16X77 W18X76 W18X76 W18X86 W18X86 W21X101 W21X101 W21X111 W21X122 W21X122 W21X122 W21X132 W27X146 W27X146 W27X161 W27X161 W30X173
W12X58 W18X65 W18X71 W14X74 W18X76 W18X86 W18X86 W18X97 W18X97 W24X104 W24X104 W24X117 W24X117 W24X131 W24X131 W24X131 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C18X42.7 v v
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W14X53 W14X61 W14X68 W16X67 W16X67 W16X77 W16X89 W16X100 W18X86 W18X97 W18X106 W18X119 W21X111 W24X68 C15X33.9 W24X68 C15X33.9 W24X76 C15X33.9 W24X146 W21X147 W24X162 W24X162 W24X176
W16X57 W16X67 W16X67 W18X76 W16X77 W18X76 W18X76 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W21X122 W21X122 W21X132 W27X146 W24X146 W27X161 W27X161 W30X173
W12X58 W18X65 W18X71 W14X74 W18X76 W18X86 W18X86 W18X97 W21X101 W24X104 W24X104 W24X117 W24X117 W24X131 W24X131 W24X146 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C18X42.7
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
15 TON RATED LOAD 25’-0” LIFT W.S./G.K. 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
W14X68 W16X67 W16X77 W16X89 W16X100 W18X97 W18X106 W21X101 W21X111 W21X111 W21X122 W21X132 W24X146 W24X146 W24X146 W24X162
W16X67 W16X77 W18X76 W18X76 W18X86 W21X101 W21X101 W21X111 W21X122 W21X122 W21X132 W24X131 W27X146 W27X146 W27X161 W27X161
W21X73 W18X76 W21X83 W18X86 W18X97 W24X104 W24X104 W24X104 W24X117 W24X117 W24X131 W24X146 W27X84 C15X33.9 W27X84 C15X33.9 W27X84 C15X33.9 W27X94 C15X33.9
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50
15 TON RATED LOAD 40’-0” LIFT W.S./G.K. W14X68 W16X67 W21X73 W16X67 W16X77 W18X76 W16X77 W18X76 W21X83 W16X89 W18X76 W18X86 W16X100 W18X86 W18X97 W18X97 W21X101 W24X104 W18X106 W21X101 W24X104 W21X101 W21X111 W24X104 W21X111 W21X122 W24X117 W21X111 W21X122 W24X117 W21X122 W21X132 W24X131 W21X132 W24X131 W24X146 W24X146 W27X146 W27X84 C15X33.9 W24X146 W27X146 W27X84 C15X33.9 W24X146 W27X161 W27X84 C15X33.9 W24X162 W27X161 W27X94 C15X33.9
52
W24X162
W30X173
W30X99 C15X33.9
52
W24X162
W30X173
W30X99 C15X33.9
54
W27X178
W24X176
W30X99 C18X42.7
54
W27X178
W24X176
W30X99 C18X42.7
56
W24X176
W30X191
W30X99 C18X42.7
56
W24X176
W30X191
W30X99 C18X42.7
58
W24X192
W30X191
W30X99 C18X42.7
58
W24X192
W30X191
W30X99 C18X42.7
60
W27X194
W30X108 C18X42.7
W24X207
60
W24X207
W27X194
W30X108 C18X42.7
84
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR U.S. TONS
ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS Span thru (ft)
(50 KSI) (50 KSI) (50 KSI) W W W 20 TON RATED LOAD 16’-8” LIFT W.S. / G.K.
20 22 24 26 28 30 32 34 36 38
W16X67 W16X77 W16X89 W18X86 W18X106 W21X101 W21X111 W21X111 W21X122 W24X131
W16X77 W18X76 W18X76 W18X97 W21X101 W21X111 W21X122 W21X122 W21X132 W24X146
40
W24X146
W27X146
42
W24X146
W27X146
44
W24X162
W27X161
46
W24X162
W27X161
48
W24X176
W30X173
50
W27X178
W24X176
52
W24X192
W30X191
54
W27X194
W30X116 C18X42.7
56
W27X217
W30X211
58
W27X217
W30X211
60
W27X217
W33X118 C18X51.9
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
20 TON RATED LOAD 26'-8" LIFT W.S. / G.K.
W18X76 W18X86 W18X86 W21X101 W24X104 W24X104 W24X117 W24X117 W24X131 W27X146 W27X84 C15X33.9 W27X84 C15X33.9 W27X94 C15X33.9 W30X99 C15X33.9 W30X99 C18X42.7 W30X99 C18X42.7 W30X108 C18X42.7 W24X207 W33X118 C18X42.7 W33X118 C18X45.8 W30X235
85
20 22 24 26 28 30 32 34 36 38
W16X67 W16X77 W16X89 W18X86 W18X106 W21X101 W21X111 W21X111 W21X122 W24X131
W16X77 W18X76 W18X76 W18X97 W21X101 W21X111 W21X122 W21X122 W21X132 W24X146
40
W24X146
W27X146
42
W24X146
W27X146
44
W24X162
W27X161
46
W24X162
W27X161
48
W24X176
W30X173
50
W27X178
W24X176
52
W24X192
W30X191
54
W27X194
W30X116 C18X42.7
56
W27X217
W30X211
58
W27X217
W33X221
60
W27X217
W33X118 C18X51.9
W18X76 W18X86 W18X86 W21X101 W24X104 W24X104 W24X117 W24X131 W24X131 W27X146 W27X84 C15X33.9 W27X84 C15X33.9 W27X94 C15X33.9 W30X99 C15X33.9 W30X99 C18X42.7 W30X99 C18X42.7 W30X108 C18X42.7 W24X207 W33X118 C18X42.7 W33X118 C18X45.8 W30X235
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR METRIC TONS ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS Span thru (ft)
(50 KSI) (50 KSI) (50 KSI) W W W 5 METRIC TON RATED LOAD 25'-0" LIFT W.S./G.K.
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
5 METRIC TON RATED LOAD 40'-0" LIFT W.S./G.K.
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W12X40 W14X43 W14X43 W14X48 W14X53 W14X61 W16X67 W16X67 W16X67 W18X76 W18X76 W18X86 W18X86 W18X97 W18X97 W21X101 W18X106 W18X119 W18X119 W18X130 W18X130
W14X43 W12X45 W14X48 W14X53 W18X60 W18X65 W14X68 W14X74 W18X76 W16X77 W16X77 W16X89 W16X89 W16X100 W21X101 W18X106 W21X111 W21X122 W21X122 W24X131 W21X132
W12X45 W14X48 W16X50 W16X57 W14X61 W16X67 W18X71 W18X76 W16X77 W18X86 W18X86 W18X97 W18X97 W21X101 W24X104 W21X111 W24X117 W18X130 W18X130 W21X132 W18X143 v
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W12X40 W14X43 W14X48 W14X53 W14X61 W16X67 W16X67 W16X67 W18X76 W18X76 W18X86 W18X86 W18X97 W18X97 W21X101 W18X106 W24X117 W21X122 W18X130 W21X132 W18X143
W14X43 W14X48 W14X53 W16X57 W18X65 W14X68 W14X74 W18X76 W16X77 W16X77 W16X89 W18X97 W16X100 W21X101 W18X106 W21X111 W18X119 W18X130 W24X131 W18X143 W24X146
W12X45 W12X50 W18X55 W18X60 W16X67 W18X71 W18X76 W16X77 W18X86 W18X86 W18X97 W16X100 W21X101 W24X104 W21X111 W24X117 W21X122 W24X131 W21X132 W24X146 W27X146
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
7 1/2 METRIC TON RATED LOAD 25'-0" LIFT W.S./G.K. 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W14X43 W14X48 W18X60 W16X67 W16X67 W16X67 W18X76 W18X76 W18X86 W18X86 W18X97 W18X97 W21X101 W21X111 W21X122 W21X122 W24X131 W21X132 W24X146 W21X147 W27X161
W14X48 W14X53 W14X61 W14X68 W14X74 W18X76 W16X77 W18X86 W16X89 W18X97 W21X101 W21X101 W18X106 W24X117 W18X130 W18X130 W21X132 W24X146 W27X146 W27X161 W24X162
7 1/2 METRIC TON RATED LOAD 40'-0" LIFT W.S./G.K. 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W12X53 W16X57 W18X65 W18X71 W18X76 W16X77 W18X86 W16X89 W18X97 W16X100 W24X104 W24X104 W21X111 W18X119 W24X131 W24X131 W18X143 W27X146 W21X147 W24X162 W21X166
86
W14X43 W14X48 W14X61 W16X67 W16X67 W16X67 W18X76 W18X76 W18X86 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W21X122 W24X131 W21X132 W24X146 W21X147 W27X161
W14X48 W14X53 W18X65 W14X68 W14X74 W18X76 W16X77 W18X86 W16X89 W18X97 W21X101 W24X104 W21X111 W24X117 W18X130 W24X131 W21X132 W24X146 W27X146 W27X161 W24X162
W12X53 W16X57 W16X67 W18X71 W18X76 W16X77 W18X86 W16X89 W18X97 W16X100 W24X104 W18X106 W24X117 W18X119 W24X131 W21X132 W18X143 W27X146 W21X147 W24X162 W21X166
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR METRIC TONS ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS Span thru (ft)
(50 KSI) (50 KSI) (50 KSI) W W W 10 METRIC TON RATED LOAD 25'-0" LIFT W.S./G.K.
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
10 METRIC TON RATED LOAD 40'-0" LIFT W.S./G.K.
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W14X53 W14X61 W16X67 W16X67 W18X76 W18X76 W18X86 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W21X122 W24X131 W21X132 W24X146 W27X161 W27X161 W24X162 W24X176
W16X57 W18X65 W14X68 W18X76 W16X77 W18X86 W16X89 W18X97 W21X101 W24X104 W21X111 W24X117 W18X130 W24X131 W21X132 W24X146 W27X146 W24X162 W24X162 W21X166 W27X178
W18X60 W16X67 W18X71 W16X77 W21X83 W16X89 W18X97 W16X100 W24X104 W18X106 W24X117 W21X122 W24X131 W21X132 W24X146 W27X146 W21X147 W21X166 W21X166 W30X173 W21X182
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W14X53 W14X61 W16X67 W16X67 W18X76 W18X76 W18X86 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W21X122 W24X131 W24X146 W24X146 W27X161 W27X161 W24X162 W24X176
W16X57 W18X65 W18X71 W18X76 W16X77 W18X86 W18X97 W18X97 W21X101 W24X104 W21X111 W24X117 W24X131 W24X131 W21X132 W27X146 W27X146 W24X162 W24X162 W30X173 W27X178
W18X60 W16X67 W14X74 W16X77 W18X86 W16X89 W16X100 W16X100 W24X104 W18X106 W24X117 W21X122 W21X132 W21X132 W24X146 W21X147 W21X147 W21X166 W21X166 W24X176 W21X182
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
15 METRIC TON RATED LOAD 25'-0" LIFT W.S./G.K. 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W16X67 W16X67 W18X76 W18X76 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W24X131 W24X146 W24X146 W24X146 W27X161 W24X162 W24X176 W24X176 W30X191 W27X194 W30X211
W18X71 W18X76 W16X77 W18X86 W18X97 W21X101 W24X104 W21X111 W24X117 W24X131 W21X132 W27X146 W27X146 W27X161 W24X162 W30X173 W27X178 W30X191 W24X192 W24X207 W27X217
15 METRIC TON RATED LOAD 40'-0" LIFT W.S./G.K. 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
W14X74 W16X77 W18X86 W16X89 W16X100 W24X104 W21X111 W24X117 W21X122 W21X132 W24X146 W21X147 W27X161 W24X162 W30X173 W24X176 W30X191 W24X192 W27X194 W30X211 W33X221
87
W16X67 W16X67 W18X76 W18X76 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W24X131 W24X146 W24X146 W24X146 W27X161 W24X162 W24X176 W24X176 W30X191 W27X194 W30X211
W18X71 W18X76 W16X77 W18X86 W18X97 W21X101 W24X104 W21X111 W24X117 W24X131 W21X132 W27X146 W27X146 W27X161 W24X162 W30X173 W27X178 W30X191 W24X192 W24X207 W27X217
W14X74 W16X77 W18X86 W16X89 W16X100 W24X104 W21X111 W24X117 W21X122 W21X132 W24X146 W21X147 W27X161 W24X162 W30X173 W24X176 W30X191 W24X192 W27X194 W30X211 W33X221
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
BRIDGE BEAM SELECTION DOUBLE GIRDER TOP RUNNING MOTOR DRIVEN ESTIMATED BRIDGE BEAM SELECTIONS FOR METRIC TONS ALL DATA BASED ON 25' & 40' LIFT WORLD SERIES & GLOBAL KING HOISTS Span thru (ft) 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
(50 KSI) (50 KSI) (50 KSI) W W W 20 METRIC TON RATED LOAD 16'-8" LIFT W.S. / G.K. W18X76 W18X76 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W24X131 W24X146 W24X146 W27X161 W27X161 W30X173 W24X176 W30X191 W27X194 W30X211 W30X211 W27X217 W27X235
W16X77 W18X86 W18X97 W21X101 W24X104 W21X111 W24X117 W24X131 W21X132 W27X146 W27X146 W24X162 W24X162 W24X176 W27X178 W24X192 W33X201 W40X215 W27X217 W36X230 W30X235
Span thru (ft)
(50 KSI) W
(50 KSI) W
(50 KSI) W
20 METRIC TON RATED LOAD 26'-8" LIFT W.S. / G.K.
W21X83 W16X89 W16X100 W24X104 W21X111 W24X117 W21X122 W21X132 W24X146 W21X147 W27X161 W30X173 W30X173 W27X178 W30X191 W27X194 W24X207 W27X217 W33X221 W27X235 W33X241
20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60
88
W18X76 W18X76 W18X86 W18X97 W21X101 W21X101 W21X111 W21X122 W24X131 W24X146 W24X146 W27X161 W27X161 W30X173 W24X176 W30X191 W27X194 W30X211 W30X211 W27X217 W27X235
W16X77 W18X86 W18X97 W21X101 W24X104 W21X111 W24X117 W24X131 W21X132 W27X146 W27X146 W24X162 W24X162 W24X176 W27X178 W24X192 W33X201 W40X215 W27X217 W36X230 W30X235
W21X83 W16X89 W16X100 W24X104 W21X111 W24X117 W21X122 W21X132 W24X146 W21X147 W27X161 W30X173 W30X173 W27X178 W30X191 W27X194 W24X207 W27X217 W33X221 W27X235 W33X241
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & COMPONENTS SECTION CONTENTS:
YALE/SHAW-BOX TOP-RUNNING ROTATING AXLE CRANE KITS & COMPONENTS
CRANE KITS & CRANE COMPONENTS
SPECIFICATIONS
YALE/SHAW-BOX SINGLE & DOUBLE GIRDER TOP-RUNNING ROTATING AXLE CRANE KITS CAPACITY: Determined upon application SERVICE CLASS: Meets the duty requirements of CMAA Class D Service OPERATION: Indoor WHEELS: Forged Steel hardened to 400 - 450 BHN BUMPERS: Rubber Conical type TRAVERSE GEARING: Helical, heat-treated alloy steel TRAVERSE BRAKE: 50% torque, AC disc type TRAVERSE MOTOR: Nema design 30 minute TENV with Class F insulation. CONTROL: Variable frequency type BEARINGS: Spherical roller bearings
90
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS 9” ROTATING AXLE END TRUCK VARIABLE FREQUENCY CONTROL † Traverse Speed/List Price 100
120
150
Weight (lbs)
HP Each Motor
$14,633
$14,633
$14,739
1264
1
$14,898
$14,888
$14,996
1297
1½
9R4.5/2.0-V-*
$15,302
$15,288
$15,396
1311
2
9R6.0/1.0-V-*
$14,911
$14,916
$15,058
1411
1
9R6.0/1.5-V-*
$15,164
$15,172
$15,310
1444
1½
9R6.0/2.0-V-*
$15,565
$15,572
$15,713
1458
2
9R7.5/1.0-V-*
$15,198
$15,248
$15,370
1558
1
$15,451
$15,504
$15,623
1591
1½
9R7.5/2.0-V-*
$15,855
$15,906
$16,027
1605
2
9R8.0/1.0-V-*
$15,288
$15,369
$15,476
1607
1
$15,542
$15,621
$15,731
1640
1½
9R8.0/2.0-V-*
$15,945
$16,022
$16,128
1654
2
9R9.0/1.0-V-*
$15,473
$15,606
$15,685
1705
1
Kit Number
Wheel Base
Max. Span
9R4.5/1.0-V-* 9R4.5/1.5-V-*
9R7.5/1.5-V-*
9R8.0/1.5-V-*
4' - 6"
6' - 0"
7' - 6"
8' - 0"
31' - 6"
42' - 0"
52' - 6"
56' - 0"
$15,722
$15,860
$15,938
1738
1½
9R9.0/2.0-V-*
$16,125
$16,260
$16,338
1752
2
9R10.0/1.0-V-*
$15,657
$15,843
$15,892
1803
1
$15,910
$16,095
$16,146
1836
1½
$16,311
$16,500
$16,550
1850
2
9R9.0/1.5-V-*
9R10.0/1.5-V-* 9R10.0/2.0-V-*
9' - 0"
10' - 0"
63' - 0"
70' - 0"
Max. Durability Wheel Load ASCE 20#
ASCE 40#
ASCE 60 & 70# ARA-B 100#
11300
16800
23600
Kit Consists of: 2 trucks with bumpers - flat tread wheels are standard 1 NEMA 4/12 panel with disconnect 2 Drives, each with Motor, AC disc brake and hollow shaft reducer*
OPTIONS
Specify: Traverse Speed Rail Size Voltage
Wheel bases in 6" increments are also available from a minimum of 3' - 6" to a maximum of 14' - 6".
Note: Use Yale® Shaw-Box® Crane Component Specifications catalog to calculate the correct bumper size for your application or call factory.
Add for wheel bases in-between cataloged wheel bases in 6" increments�����������������������������������������������������������������������������add $96 per 6"
**When selecting bridge motor hp shown on this page, motors are sized based on 66% of the total calculated hp required for contactor or variable frequency drive (VFD) control. However, if the reverse plugging feature of the VFD is to be used, motors should be sized to 75% of the total calculated hp required to get full reverse plugging performance.
Add for wheel bases in-between cataloged wheel bases in other than 6" increments�������������������������������������������������������������������� add $413
† For 575 volt applications - See Rotating Axle Options Section.
For pricing on wheel bases other than those listed contact factory.
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Note: Drives shipped assembled but not mounted to trucks.
END TRUCKS
91
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS 12" ROTATING AXLE END TRUCK VARIABLE FREQUENCY CONTROL † Traverse Speed/List Price
Kit Number
Wheel Base
Max. Span
100 fpm
150 fpm
Max. Durability Wheel Load
200 fpm
Weight (lbs)
HP Each Motor
12R9.0/1.5-V-*
$20,729
N/A
N/A
2682
1½
12R9.0/2.0-V-*
$21,014
$21,444
$21,444
2625
2
$23,024
$23,591
$23,591
2828
3
12R9.0/5.0-V-*
N/A
$24,511
$24,511
2982
5
12R10.0/1.5-V-*
$20,919
N/A
N/A
2804
1½
$21,210
$21,633
$21,633
2750
2
$23,582
$23,779
$23,779
2950
3
12R10.0/5.0-V-*
N/A
$24,704
$24,704
3104
5
12R11.0/1.5-V-*
$21,109
N/A
N/A
2926
1½
$21,396
$21,825
$21,825
2872
2
$23,987
$24,167
$24,167
3072
3
12R11.0/5.0-V-*
N/A
$24,886
$24,886
3226
5
12R12.0/1.5-V-*
$21,296
N/A
N/A
3048
1½
$21,586
$22,014
$22,014
2994
2
$24,177
$24,356
$24,356
3194
3
12R12.0/5.0-V-*
N/A
$25,081
$25,081
3348
5
12R13.0/1.5-V-*
$21,483
N/A
N/A
3170
1½
$21,775
$22,206
$22,206
3116
2
$24,419
$24,601
$24,601
3316
3
12R13.0/5.0-V-*
N/A
$25,260
$25,260
3470
5
12R14.0/1.5-V-*
$21,672
N/A
N/A
3292
1½
$21,969
$22,395
$22,395
3238
2
$24,656
$24,839
$24,839
3438
3
N/A
$25,464
$25,464
3592
5
12R9.0/3.0-V-*
12R10.0/2.0-V-* 12R10.0/3.0-V-*
12R11.0/2.0-V-* 12R11.0/3.0-V-*
12R12.0/2.0-V-* 12R12.0/3.0-V-*
12R13.0/2.0-V-* 12R13.0/3.0-V-*
12R14.0/2.0-V-* 12R14.0/3.0-V-* 12R14.0/5.0-V-*
9' - 0"
10' - 0"
11' - 0"
12' - 0"
13' - 0"
14' - 0"
63' - 0"
70' - 0"
77' - 0"
84' - 0"
91' - 0"
98' - 0"
ASCE 40#
ASCE 60# & 70# ARA-B 100#
ASCE 80# & 85# ARA-A 100# BETH 104# USS 105#
22400
31400
33700
Kit Consists of: 2 trucks with bumpers - flat tread wheels are standard 1 NEMA 4/12 panel with disconnect 2 Drives, each with Motor, AC disc brake and hollow shaft reducer*
OPTIONS
Specify: Traverse Speed Rail Size Voltage
Wheel bases in 6" increments are also available from a minimum of 3' - 6" to a maximum of 14' - 6".
Note: Use Yale® Shaw-Box® Crane Component Specifications catalog to calculate the correct bumper size for your application or call factory.
Add for wheel bases in-between cataloged wheel bases in 6" increments���������������������������������������������������������������������������add $100 per 6"
**When selecting bridge motor hp shown on this page, motors are sized based on 66% of the total calculated hp required for contactor or variable frequency drive (VFD) control. However, if the reverse plugging feature of the VFD is to be used, motors should be sized to 75% of the total calculated hp required to get full reverse plugging performance.
Add for wheel bases in-between cataloged wheel bases in other than 6" increments�������������������������������������������������������������������� add $413
† For 575 volt applications - See Rotating Axle Options Section.
For pricing on wheel bases other than those listed contact factory.
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Note: Drives shipped assembled but not mounted to trucks.
END TRUCKS
92
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS 15" ROTATING AXLE END TRUCK VARIABLE FREQUENCY CONTROL † Traverse Speed/List Price
Kit Number
Wheel Base
Max. Span
15R9.0/3.0-V-* 15R9.0/5.0-V-*
9' - 0"
63' - 0"
15R9.0/7.5-V-* 15R10.0/3.0-V-* 15R10.0/5.0-V-*
10' - 0"
70' - 0"
15R10.0/7.5-V*
Max. Durability Wheel Load
100
150
200
250
Weight (lbs)
HP Each Motor
$29,849
N/A
N/A
N/A
4024
3
$30,725
$30,588
$30,798
N/A
4270
5
N/A
$36,909
$37,127
$36,996
4186
7½ 3
$30,128
N/A
N/A
N/A
4173
$31,001
$30,862
$31,077
N/A
4419
5
N/A
$37,192
$37,416
$37,289
4335
7½ 3
$30,403
N/A
N/A
N/A
4322
$31,273
$31,139
$31,359
N/A
4568
5
15R11.0/7.5-V-*
N/A
$37,477
$37,701
$37,582
4484
7½
15R12.0/3.0-V-*
$30,676
N/A
N/A
N/A
4471
3
$31,546
$31,412
$31,636
N/A
4717
5
N/A
$37,758
$37,988
$37,874
4633
7½ 3
15R11.0/3.0-V-* 15R11.0/5.0-V-*
15R12.0/5.0-V-*
11' - 0"
12' - 0"
77' - 0"
84' - 0"
15R12.0/7.5-V-* 15R13.0/3.0-V-* 15R13.0/5.0-V-*
13' - 0"
91' - 0"
15R13.0/7.5-V-* 15R14.0/3.0-V-* 15R14.0/5.0-V-* 15R14.0/7.5-V-*
14' - 0"
98' - 0"
$30,948
N/A
N/A
N/A
4620
$31,824
$31,686
$31,967
N/A
4866
5
N/A
$38,040
$38,326
$38,168
4782
7½
$31,224
N/A
N/A
N/A
4769
3
$32,098
$31,962
$32,294
N/A
5015
5
N/A
$38,324
$38,661
$38,512
4931
7½
ASCE 40#
ASCE 60# & 70# ARA-B 100#
ASCE 80# & 85# ARA-A 100# BETH 104# USS 105#
28000
39300
42100
Kit Consists of: 2 trucks with bumpers - flat tread wheels are standard 1 NEMA 4/12 panel with disconnect 2 Drives, each with Motor, AC disc brake and hollow shaft reducer*
OPTIONS
Specify: Traverse Speed Rail Size Voltage
Wheel bases in 6” increments are also available from a minimum of 3’ - 6” to a maximum of 18’ - 0”.
Note: Use Yale® Shaw-Box® Crane Component Specifications catalog to calculate the correct bumper size for your application or call factory.
Add for wheel bases in-between cataloged wheel bases in 6" increments���������������������������������������������������������������������������add $149 per 6"
**When selecting bridge motor hp shown on this page, motors are sized based on 66% of the total calculated hp required for contactor or variable frequency drive (VFD) control. However, if the reverse plugging feature of the VFD is to be used, motors should be sized to 75% of the total calculated hp required to get full reverse plugging performance.
Add for wheel bases in-between cataloged wheel bases in other than 6" increments�������������������������������������������������������������������� add $465
† For 575 volt applications - See Rotating Axle Options Section.
For pricing on wheel bases other than those listed contact factory.
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Note: Drives shipped assembled but not mounted to trucks.
END TRUCKS
93
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
CRANE KITS 18" ROTATING AXLE END TRUCK VARIABLE FREQUENCY CONTROL † Traverse Speed/List Price
Kit Number
Wheel Base
Max. Span
18R9.0/5.0-V-* 18R9.0/7.5-V-*
9' - 0"
63' - 0"
18R9.0/10.0-V-*
Max. Durability Wheel Load
100
150
200
250
Weight (lbs)
HP Each Motor
$48,468
N/A
N/A
N/A
6181
5
$57,414
$53,386
$53,386
N/A
6311
7½
N/A
$59,400
$56,656
$57,117
5931
10
$49,411
N/A
N/A
N/A
6385
5
$58,385
$54,294
$54,294
N/A
6515
7½
18R10.0/10.0-V-*
N/A
$60,322
$57,580
$57,948
6135
10
18R11.0/5.0-V-*
$50,363
N/A
N/A
N/A
6589
5
$59,363
$55,333
$55,333
N/A
6719
7½
18R11.0/10.0-V-*
N/A
$61,427
$58,684
$59,212
6339
10
18R12.0/5.0-V-*
$51,309
N/A
N/A
N/A
6813
5
$60,336
$56,426
$56,426
N/A
6923
7½
N/A
$62,536
$59,793
$60,477
6543
10
18R10.0/5.0-V-* 18R10.0/7.5-V-*
18R11.0/7.5-V-*
18R12.0/7.5-V-*
10' - 0"
11' - 0"
12' - 0"
70' - 0"
77' - 0"
84' - 0"
18R12.0/10.0-V-*
$52,250
N/A
N/A
N/A
5767
5
$61,307
$57,492
$57,492
N/A
7127
7½
18R13.0/10.0-V-*
N/A
$63,505
$60,763
$61,443
6747
10
18R14.0/5.0-V-*
$53,190
N/A
N/A
N/A
5971
5
$62,274
$58,462
$58,462
N/A
7331
7½
N/A
$64,471
$61,730
$62,413
6951
10
18R13.0/5.0-V-* 18R13.0/7.5-V-*
18R14.0/7.5-V-* 18R14.0/10.0-V-*
13' - 0"
14' - 0"
91' - 0"
98' - 0"
ASCE 40#
ASCE 60# & 70# ARA-B 100#
ASCE 80# & 85# ARA-A 100# BETH 104# USS 105#
33700
47200
50500
Kit Consists of: 2 trucks with bumpers - flat tread wheels are standard 1 NEMA 4/12 panel with disconnect 2 Drives, each with Motor, AC disc brake and hollow shaft reducer*
OPTIONS
Specify: Traverse Speed Rail Size Voltage
Wheel bases in 6” increments are also available from a minimum of 3’ - 6” to a maximum of 18’ - 0”.
Note: Use Yale® Shaw-Box® Crane Component Specifications catalog to calculate the correct bumper size for your application or call factory.
Add for wheel bases in-between cataloged wheel bases in 6" increments���������������������������������������������������������������������������add $496 per 6"
**When selecting bridge motor hp shown on this page, motors are sized based on 66% of the total calculated hp required for contactor or variable frequency drive (VFD) control. However, if the reverse plugging feature of the VFD is to be used, motors should be sized to 75% of the total calculated hp required to get full reverse plugging performance.
Add for wheel bases in-between cataloged wheel bases in other than 6" increments�������������������������������������������������������������������� add $829
† For 575 volt applications - See Rotating Axle Options Section.
For pricing on wheel bases other than those listed contact factory.
Watch 230v amp draws - 1-3 hp panels have 30 amp disconnect, 5-10 hp panels have 60 amp.
Note: Drives shipped assembled but not mounted to trucks.
END TRUCKS
94
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE END TRUCK ROTATING AXLE END TRUCKS (FLAT TREAD WHEELS STANDARD)
ROTATING AXLE END TRUCKS ONLY NO DRIVES OR CONTROLS
ADD FOR TAPERED TREAD DRIVER WHEELS FOR QUANTITY OF 2
1 pair with Conical Bumpers and Rail Sweeps Reference Number
Wheel Diameter
Wheel Base
Rail Size
Wheel Diameter
Suggested List Add For Two (2)
9"
$629
930
12"
$748
List Price
Wt. (lbs)
$7,526
TRRA954
4'-6"
TRRA972
6'-0"
$7,789
1077
15"
$836
TRRA990
7'-6"
20 - 30#
$8,080
1224
$931
TRRA996
8'-0"
ASCE
$8,170
18"
1273
Contact Factory for lead time on tapered tread wheels.v
TRRA9108
9'-0"
$8,356
1371
TRRA9120
10'-0"
$8,542
1469
4'-6"
$7,526
930
TRRA972
6'-0"
$7,789
1077
TRRA990
7'-6"
40 - 70#
$8,080
1224
END CONNECTION
TRRA996
8'-0"
ASCE
$8,170
1273
TRRA9108
9'-0"
$8,356
1371
"Whales Tail" End Connection Kit Catalog No. 444697-10 is designed for fixed axle end trucks. However, the End Connection Kits may possibly be used on certain smaller sized rotating axle end trucks. Consult factory for specific applications and assistance.
TRRA954
9"
TRRA9120
10'-0"
$8,542
1469
TRRA12108
9'-0"
$12,877
2238
TRRA12120
10'-0"
$13,067
2360
TRRA12132
11'-0"
30 - 50#
$13,254
2482
TRRA12144
12'-0"
ASCE
$13,440
2604
TRRA12156
13'-0"
$13,633
2726
14'-0"
$13,821
2848
9'-0"
$12,877
2238
TRRA12168 TRRA12108
12"
SPARK RESISTANT FEATURES See Rotating Axle Options Section.
SPECIAL AXLES Special Axles can be quoted on request. Consult factory for prices and lead time.
SQUARE BAR RUNWAY RAIL APPLICATIONS Rotating Axle Wheel Dia.
Width Min. Height
Min.
Max.
Price Add
TRRA12120
10'-0"
$13,067
2360
9"
1"
1"
2-1/4"
$946
TRRA12132
11'-0"
60 - 85#
$13,254
2482
12"
1-1/4"
1-1/2"
2-5/8"
$1,119
TRRA12144
12'-0"
ASCE
$13,440
2604
15"
1-1/4"
1-1/2"
2-5/8"
$1,252
TRRA12156
13'-0"
$13,633
2726
TRRA12168
14'-0"
$13,821
2848
18"
1-3/8"
1-1/2"
2-5/8"
$1,394
TRRA15108
9'-0"
$17,930
3301
TRRA15120
10'-0"
$18,204
3450
TRRA15132
11'-0"
30 - 50#
$18,471
3599
TRRA15144
12'-0"
ASCE
$18,743
3748
TRRA15156
13'-0"
$19,012
3897
TRRA15168
14'-0"
$19,284
4046
9'-0"
$17,930
3301
TRRA15120
10'-0"
$18,204
3450
TRRA15132
11'-0"
60 - 85#
$18,471
3599
TRRA15144
12'-0"
ASCE
$18,743
3748
TRRA15156
13'-0"
$19,012
3897
TRRA15168
14'-0"
$19,284
4046
TRRA18108
9'-0"
$26,966
4846
TRRA18120
10'-0"
$27,910
5050
TRRA18132
11'-0"
30 - 50#
$28,856
5254
TRRA18144
12'-0"
ASCE
$29,801
5458
TRRA18156
13'-0"
$30,743
5662
TRRA18168
14'-0"
$31,686
5866
9'-0"
$26,966
4846
TRRA18120
10'-0"
$27,910
5050
TRRA18132
11'-0"
60 - 85#
$28,856
5254
TRRA18144
12'-0"
ASCE
$29,801
5458
TRRA18156
13'-0"
$30,743
5662
TRRA18168
14'-0"
$31,686
5866
TRRA15108
TRRA18108
15"
18"
Note: Please Specify Rail with Order
95
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE CRANE KIT OPTIONS Description
Price
Description
NEMA 4 Brake (For outdoor applications)
Variable Frequency Drive - 575/3/60 Volt Price Adder to standard 460 VFD Panels $216
1½ Maximum Motor HP
$4,883
2 Maximum Motor HP
$4,883
$698
3 Maximum Motor HP
$4,656
$1,517
5 Maximum Motor HP
$3,829
7½ Maximum Motor HP
$3,168
10 Maximum Motor HP
$3,652
NEMA 4X Enclosure Adders Fiberglass Stainless Steel
Strip Heaters Strip Heater (Non Hazardous areas only) Includes: Heaters in both motors & control panel with transformer
Price
$862
Deduct VFD Controls
Warning Horns
1½ Maximum Motor HP
-$3,053
Warning Horn Must specify method of activation
$435
2 Maximum Motor HP
-$3,855
3 Maximum Motor HP
-$4,336
Warning Light Must specify method of activation
$727
5 Maximum Motor HP
-$4,658
7½ Maximum Motor HP
-$7,870
10 Maximum Motor HP
-$9,961
Travel Limit Switch Single Switch, Bi-Directional (Trip Dog by others) NEMA 4/12 Intrinsically safe (Hazardous area)
$837
Deduct for 2 Speed Control in lieu of VFD
$1,326
1½ Maximum Motor HP
Disconnect Panel Adders: 60 Amp Panel
$259
100 Amp Panel
$340
Thermal Overload Relays: Single Speed & VFD
$234
2-Speed
$401
-$963
2 Maximum Motor HP
-$1,056
3 Maximum Motor HP
-$1,056
5 Maximum Motor HP
-$1,285
Adjustable EAC (115 Volt Control) 208/230 Volt, 1-2 HP
$692
208/230 Volt, 3-6 HP
$1,537
460 Volt, 1-4 HP
$692
460 Volt, 5-10 HP
$1,537
96
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS ROTATING AXLE CRANE KIT OPTIONS EXPLOSION PROOF/SPARK RESISTANT OPTIONS Description
Price
Intrinsically Safe Relays $698
Single Speed - per motion
$1,385
2-Speed - per motion
Spark Resistant Wheels TOP RUNNING 9" Bronze Wheels with Rail Sweeps 12" Bronze Wheels Consult Factory
with Rail Sweeps 15" Bronze Wheels with Rail Sweeps 18" Bronze Wheels with Rail Sweeps
EXPLOSION PROOF MOTOR/CONTROL*
ADD TO STANDARD ROTATING AXLE KITS IN THIS CATALOG Division 1 Class 1, Group C & D Class 2, Group F & G
Division 2 Class 1, Group C & D
Class 2, Group F & G
1-Speed
2-Speed
Drive HP
1-Speed
2-Speed
Drive HP
1-Speed
2-Speed
$12,260
$14,477
1
$5,078
$6,585
1
$1,491
$2,230
$13,795
$14,492
1-1/2
$6,539
$6,602
1-1/2
$1,491
$2,230
$13,795
$14,492
2
$6,539
$6,602
2
$1,491
$2,230
$13,795
$14,492
3
$6,539
$6,602
3
$1,491
$2,230
–
$18,617
5
$6,173
5
$1,491
$2,230
–
$23,817
7-1/2
$7,899
7-1/2
$1,491
$2,230
–
$30,578
10
$10,139
10
$1,491
$2,230
*For VFD Controls - Contact Factory
97
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS 1 AND 2 SPEED BRIDGE CONTROL PANELS
NEMA 4/12 PANEL WITH BUILT IN DISCONNECT WITHOUT SOFT-START FOR BRIDGE TRAVERSE MOTIONS Price Includes; Feature: NEMA 4/12 Panel Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle Fuses Soft-Start Hinge Point
1-3 h.p. 20 W X 16 H X 8.8" D* 30 Amp** 115V/75VA 30 Amp** Yes No Horizontal at bottom of panel
5-10 h.p. 24 W X 20 H X 10.8" D 60 Amp** 115V/100VA 60 Amp** Yes No Horizontal at bottom of panel
*Adding a 60 amp disconnect increases enclosure size to the 5-10 hp panel. Do not use single speed control for speeds over 100 F.P.M. Two speed control over 100 F.P.M. requires an electronic acceleration control.
For Maximum Total H.P.
Single Speed Catalog Number
List Price
1
444231-21
$1,774
2
444231-22
$1,774
3
444231-23
$1,774
Voltage
230
444231-25
$2,094
7.5
444231-27
$2,418
10
444231-29
$2,418
1
444231-41
$1,774
2
444231-42
$1,774
3
444231-43
$1,774
5
460
444231-45
$2,095
7.5
444231-47
$2,418
10
444231-49
$2,418
1
444231-51
$1,774
2
444231-52
$1,774
3
444231-53
$1,774
5
575
444231-55
$2,095
7.5
444231-57
$2,418
10
444231-59
$2,418
5
Two Speed Weight (lbs) 75
115
75
115
75
115
Catalog Number
List Price
444232-21
$1,840
444232-22
$1,840
444232-23
$1,840
444232-25
$2,212
444232-27
$2,594
444232-29
$2,594
444232-41
$1,840
444232-42
$1,840
444232-43
$1,840
444232-45
$2,213
444232-47
$2,594
444232-49
$2,594
444232-51
$1,840
444232-52
$1,840
444232-53
$1,840
444232-55
$2,213
444232-57
$2,594
444232-59
$2,594
Weight (lbs) 85
125
85
125
85
125
** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications. Note: Panel has room for addition of field installed soft-start. Reference components sections for prices. Note: For approximate shipping weights add 10%
98
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS 1 AND 2 SPEED BRIDGE CONTROL PANELS
NEMA 4/12 PANEL WITH BUILT IN DISCONNECT
WITH SOFT-START BUILT IN FOR BRIDGE TRAVERSE MOTIONS Price Includes; Feature: NEMA 4/12 Panel Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle Fuses Soft-Start Hinge Point
1-3 h.p. 20 W X 16 H X 8.8" D* 30 Amp** 115V/75VA 30 Amp** Yes Yes Horizontal at bottom of panel
5-10 h.p. 24 W X 20 H X 10.8" D 60 Amp** 115V/100VA 60 Amp** Yes Yes Horizontal at bottom of panel
*Adding a 60 amp disconnect increases enclosure size to the 5-10 hp panel. Do not use single speed control for speeds over 100 F.P.M. Two speed control over 100 F.P.M. requires an electronic acceleration control.
Single Speed For Maximum Total H.P.
Catalog Number
List Price
1
444711-21
$2,460
2
444711-22
$2,460
444711-23 444711-25 —
—
3 5
Voltage
230
7.5
Two Speed Weight (lbs)
Catalog Number
List Price
444712-21
$2,521
444712-22
$2,521
$3,614
444712-23
$3,732
$3,614
444712-25
$3,732
—
—
85
125
10
—
—
—
—
1
444711-41
$2,182
444712-41
$2,353
2
444711-42
$2,460
444712-42
$2,521
444711-43
$3,295
444712-43
$3,362
444712-45
$3,732
444712-47
$4,025
444712-49
$4,025
3
460
444711-45
$3,614
7.5
444711-47
$3,939
10
444711-49
$3,939
5
85
125
Weight (lbs) 95
135
95
135
** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications. Note: Panel has room for addition of field installed soft-start. Reference components sections for prices. Note: For approximate shipping weights add 10%
99
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
INDIVIDUAL CRANE COMPONENTS & OPTIONS VARIABLE FREQUENCY BRIDGE CONTROL PANELS
NEMA 4/12 PANEL WITH BUILT IN DISCONNECT FOR BRIDGE TRAVERSE MOTIONS Speed range up to 20:1 (in F.P.M.) Price Includes; Feature: Electromotive Drive Type Control only CMAA Service Class NEMA 4/12 Panel Control Points
1-3 h.p. G+ Mini D 20 W X 16 H X 8.5 D* 2-step, 3-step or 2-step & 3-step infinitely variable 30 Amp 115V / 75VA 30 Amp Yes Yes Horizontal at bottom of panel
Mainline Contactor Control Transformer Disconnect with Panel Mounted Handle External Dynamic Braking Resistor Fuses Hinge Point
5-10 h.p. G+ Mini D 24 W X 20 H X 10.5 D 2-step, 3-step & 5-step or 2-step & 3-step infinitely variable 60 Amp* 115V / 75VA 60 Amp Yes Yes Horizontal at bottom of panel
Includes: AC Brake Relay (12 amp), Surge Suppression on Coil and Space Terminal Board (10 terminals)
Max. Total H.P.
** Max. Full Load Amps
List Price
Catalog Number
1
5.0
$2,845
448550-21
2
8.0
$3,077
448550-22
11.0
$3,214
448550-23
17.5
$3,921
448550-25
7½
25.0
$4,586
448550-27
10
33.0
$5,019
448550-29
Power Supply
*** Wt. (lbs)
Power Supply
** Max. Full Load Amps
List Price
Catalog Number
3.4
$2,961
448550-41
3.4
$2,961
448550-42
4.8
$3,158
448550-43
8.6
$4,003
448550-45
14.8
$4,838
448550-47
18.0
$5,366
448550-49
*** Wt. (lbs) 80
3 5
200 to 230 Volts 50/60 Hz
80 380 to 460 Volts 50/60 Hz
105 105
* 3 hp panel for 460 volts is 24 W X 20 H X 10.5 D. *Adding a 60 amp disconnect increases enclosure size to the 5-10 hp panel. ** Please check the total amperage draw requirements for your crane application so the amperage limits of the mainline contactor and disconnect are not exceeded. Especially on 230 volt applications. *** Add 15% for approximate shipping weight. †For 575 volt applications - See Fixed Axle Options Section.
100
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
NOTES
101
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
CRANE KITS & CRANE COMPONENTS
NOTES
102
YSCKCCPL-0215
Prices subject to change without notice. All prices are in US Funds.
Phone (800) 888.0985 • (716) 689.5400 • Fax: (716) 689.5644 • www.cmworks.com © 2015 Columbus McKinnon Corporation. All Rights Reserved.
YSCKCCPL-0215