Specifications Of Portable Wooden Cabins

Ref: FQA / 002 / INDENT / 24.04.2008

Inter office communication: Sub: Requirement of portable Wooden Cabins, one each for Field Quality Assurance Laboratory and Security at Mundra TPP – Specifications: Ref:

Inter office communication reference No. Ref: FQA / 001 / INDENT / 21.04.2008

In continuation to above and subsequent to discussions held with you, please find the details of our requirements for further actions from your end. The under mentioned specifications shall be same for both the cabins. 1.

Cabin

36 feet x 12 feet. The verandah of size 12 feet x 6 feet shall be placed in centre at its front with roof over and above the dimension of 36 feet x 12 feet of the cabin.

2.

Doors

2 numbers of size 3.5 feet x 7 feet with MS frame and wooden paneled

3.

Windows

Aluminum fabricated having size: 3’x 3’ – 6 Nos.

4.

Base:

Wooden platform: Grid work of wooden members having size 4 inch x 2 inch with 16 mm thick waterproof marine ply for flooring.

5.

Side Walls

6.

Roof

7.

Painting

Pinewood framework for walls: 2.5 inch x 1.25 inch 9mm thick waterproof marine ply for outer wall cladding. Pinewood frame work with aluminum sheet mounted on top(outer)side. Internally paneled with 6mm thick marine plywood. Inside and outside painting of cabin with two coats of enamel paint [approved shade and make] over one coat of primer including preparing and finishing, with Primer & Putty, surfaces to receive the paint

It is requested to process at an early date so that full fledged laboratory can be set up for Field Quality Assurance and security section can be comfortably accommodated [K.P.Chakerwarti] Head - Field Quality Assurance APL, Mundra To, Manager [Commercial] please