Specification For The Pulverizer

Annexure IV ADDITIONAL SPECIFICATION FOR THE PULVERIZER

Pulverizer (Hammer Type)

Sl. No. 1

Suitability

Suitable for minimizing the size of Garbage using chopping hammer and pulverizing blades

2

Technical Specification

Supply of Tractor mounted pulverizer of capacity of 50 HP to 60 HP with 40 nos. of hammers and 2 nos. of blades & counter blade to make the size of Garbage not more then 6” dia including the facility of Variable speed conveyor with an output of 5-8 cu.m./hr. The length, width, height should not exceed more than 3.5 m, 1.5m and 2 m respectively. The machine must be capable of shredding banana trunk, coconut tree leafs and other bio-degradable waste.

3

Usage of Solid waste Management

Plays major role in compost yard

4

DGS & D priced vehicle

Not available

5

Service Center

Should be enable to complete the fault and repairs immediately in the local centers. The Urban Local Bodies staff who is allotted to operate this machine may be trained up to rectify the fault then and there.

6

Response time for service

The supplier should provide AMC details for the machine supplied by them

7

Annual O&M Cost

The comparative statement should be prepared on cost per tonne per hour basis

8

Taxes

The Entry tax and other tax should be included in basic cast of machine to calculate O&M

9

Training

The supplier should give training to the operators recommended by Municipality

http://sikailash.wordpress.com

Mail to:[email protected]