Specification For The Aero Tiller
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Specification For The Aero Tiller as PDF for free.
More details
- Words: 264
- Pages: 1
Annexure V ADDITIONAL SPECIFICATION FOR THE AERO TILLER
Sl. No.
Aero tiller
1
Suitability
Suitable for turning the Garbage in windrow arrangement in the Compost Yard
2
Technical Specification
Supply of self propelled Aero tiller with engine capacity of 70 to 80 HP (Diesel) to tilt the Garbage in the windrow size of 3 m x 1.5 m (width x height) with tilling capacity of 1400 m3 / hour. The Gearbox should facilitate with 12 forward and 4 reverse. The 3 m length of drum size of 850 mm dia with 250 mm blade should be to drive on both side, up and down hydraulic during operations and also in idle. The tyre should be tubeless, self cleaning, High traction with size of 12.5/8 for front and 7.5/16 for rear
3
Usage of Solid waste Management
Plays major roll in Compost Yard in tilling Garbage of generation
4
DGS & D priced vehicle
Not available
5
Service Center
Should be enable to complete the fault and repairs immediately in the local centers. The Urban Local Bodies staff who is allotted to operate this machine may be trained up to rectify the fault then and there.
6
Response time for service
The supplier should provide AMC details for the machine supplied by them
7
Annual O&M Cost
The comparative statement should be prepared on cost per tonne per hour basis
8
Taxes
The Entry tax and other tax should be included in basic cast of machine to calculate O&M
9
Training
The supplier should give training to the operators recommended by Municipality
http://sikailash.wordpress.com
Mail to:[email protected]
Sl. No.
Aero tiller
1
Suitability
Suitable for turning the Garbage in windrow arrangement in the Compost Yard
2
Technical Specification
Supply of self propelled Aero tiller with engine capacity of 70 to 80 HP (Diesel) to tilt the Garbage in the windrow size of 3 m x 1.5 m (width x height) with tilling capacity of 1400 m3 / hour. The Gearbox should facilitate with 12 forward and 4 reverse. The 3 m length of drum size of 850 mm dia with 250 mm blade should be to drive on both side, up and down hydraulic during operations and also in idle. The tyre should be tubeless, self cleaning, High traction with size of 12.5/8 for front and 7.5/16 for rear
3
Usage of Solid waste Management
Plays major roll in Compost Yard in tilling Garbage of generation
4
DGS & D priced vehicle
Not available
5
Service Center
Should be enable to complete the fault and repairs immediately in the local centers. The Urban Local Bodies staff who is allotted to operate this machine may be trained up to rectify the fault then and there.
6
Response time for service
The supplier should provide AMC details for the machine supplied by them
7
Annual O&M Cost
The comparative statement should be prepared on cost per tonne per hour basis
8
Taxes
The Entry tax and other tax should be included in basic cast of machine to calculate O&M
9
Training
The supplier should give training to the operators recommended by Municipality
http://sikailash.wordpress.com
Mail to:[email protected]
Related Documents
Specification For The Aero Tiller
November 2019 6
Specification For The Pulverizer
November 2019 14
Aero
December 2019 33
William Tiller
June 2020 2
Specification
November 2019 27