Sealed Air Instapak 901
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Sealed Air Instapak 901 as PDF for free.
More details
- Words: 298
- Pages: 2
Instapak 901 ®
Foam-in-Place Packaging System
Workstation and Instapak® chemical containers not included.
Instapak 901 Foam-in-Place Packaging System ®
The Most Advanced Hand-Held Foam Dispensing System Ever • Economical Built-in timers let you control the amount of material used. A series of ten dispense times can be used to simplify your packaging process.
• Flexible The Instapak® 901 system can be adjusted to dispense foam at the ideal rate for your application. • Instapak® 901 foam output rate: 5 to 7.5 lbs/min.
• Safe Foam output controls, built-in timers and self-diagnostic features continually monitor system performance. All information is reported on the console’s easy-to-read message center.
The Instapak® 901 system meets major international product safety standards.
• Reliable The electric pumps and self-diagnostic controls guarantee top quality Instapak® foam.
• Simple The all-electric Instapak® 901 system installs in minutes. No scheduled maintenance is required.
Sealed Air® Support Services • Operator training • Package design and testing • Equipment installation • Site selection assistance
Utility Requirements Electrical Power: The Instapak® 901 system features a patented, self-cleaning cartridge dispenser that delivers high quality Instapak® foam.
Receptacle Type:
200-240 VAC Dedicated Circuit, 50/60 Hz, 30 Amp, Single Phase with equal voltage from each leg to ground. NEMA L6-30R
For important operating and safety information, please see the “Recommendations for the Safe Use and Handling of Instapak® Foam-in-Place Chemicals” bulletin. Distributed by:
Protective Packaging 10 Old Sherman Turnpike Danbury, CT 06810 203-791-3500 Fax: 203-791-3618 www.instapak.com Our Products Protect Your Products®
Corporate Office: Sealed Air Corporation (US) 200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com © Reg. U.S. Pat. and TM Off. © Sealed Air Corporation (US) 2007. All rights reserved. Printed in the U.S.A. The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US). D-81 Rev. 7/07
Foam-in-Place Packaging System
Workstation and Instapak® chemical containers not included.
Instapak 901 Foam-in-Place Packaging System ®
The Most Advanced Hand-Held Foam Dispensing System Ever • Economical Built-in timers let you control the amount of material used. A series of ten dispense times can be used to simplify your packaging process.
• Flexible The Instapak® 901 system can be adjusted to dispense foam at the ideal rate for your application. • Instapak® 901 foam output rate: 5 to 7.5 lbs/min.
• Safe Foam output controls, built-in timers and self-diagnostic features continually monitor system performance. All information is reported on the console’s easy-to-read message center.
The Instapak® 901 system meets major international product safety standards.
• Reliable The electric pumps and self-diagnostic controls guarantee top quality Instapak® foam.
• Simple The all-electric Instapak® 901 system installs in minutes. No scheduled maintenance is required.
Sealed Air® Support Services • Operator training • Package design and testing • Equipment installation • Site selection assistance
Utility Requirements Electrical Power: The Instapak® 901 system features a patented, self-cleaning cartridge dispenser that delivers high quality Instapak® foam.
Receptacle Type:
200-240 VAC Dedicated Circuit, 50/60 Hz, 30 Amp, Single Phase with equal voltage from each leg to ground. NEMA L6-30R
For important operating and safety information, please see the “Recommendations for the Safe Use and Handling of Instapak® Foam-in-Place Chemicals” bulletin. Distributed by:
Protective Packaging 10 Old Sherman Turnpike Danbury, CT 06810 203-791-3500 Fax: 203-791-3618 www.instapak.com Our Products Protect Your Products®
Corporate Office: Sealed Air Corporation (US) 200 Riverfront Boulevard, Elmwood Park, NJ 07407 www.sealedair.com © Reg. U.S. Pat. and TM Off. © Sealed Air Corporation (US) 2007. All rights reserved. Printed in the U.S.A. The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US). D-81 Rev. 7/07
Related Documents
Sealed Air Instapak 901
November 2019 8
Sealed Air Instapak
November 2019 4
Sealed Air Instapak Foam Packaging
November 2019 6
Sealed Air Fill Air Rf
November 2019 7
Sealed Air Fill Air 2000
November 2019 7