Sealed Air Instapak

Equipment that brings together the speed of a foam-in-bag system with the protective properties of an engineered packaging design. Fast: Instapak® molding equipment can produce 600 cushions per hour on a just-in-time basis. Versatile: Custom inserts can be easily interchanged in the mold cavity to produce engineered cushions for a variety of different products. Protective: Precision fit cushions surround your product to protect it from the rigors of shipping and handling. Cost-Effective: Just-in-time cushion molding saves time and valuable warehouse space versus other fabricated materials.

Instapak® Foam-in-Bag Molding Equipment Foam-in-Bag Molding Process

Foam-in-Bag Molding Equipment

Custom-designed cushions that provide optimum protection are produced quickly and easily by any Instapak® foam-in-bag molding system.

This equipment produces molded cushions for products that require a consistent, precise fit and engineered protection. If you package from 20 to 2000 products a day, one of these molding systems can produce protective cushions for your products.

1. With the push of a button, the SpeedyPacker® system quickly dispenses an Instapak® foam-filled bag.

2. When placed into the vertical mold enclosure, the foam-filled bag is drawn in to the mold by an on-board vacuum.

Instapak® Twin Vertical Molding Station • Low Initial Investment • Up to 100 Cushions Per Hour • Floor Space Requirement: 12 Square Feet • Electrical Power: 15 AMP, 110-120 Volt A.C. • Receptacle Type: NEMA 5-15R

Instapak® Molding Wheel • Space Efficient 6-mold Configuration • Up to 300 Cushions Per Hour • Floor Space Requirement: 24 Square Feet • Electrical Power: 15 AMP, 110-120 Volt A.C. • Receptacle Type: NEMA 5-15R • Air Requirement: 100 p.s.i. Clean Dry Air

3. After the cushion has been allowed to fully expand, the operator removes it with the help of a built-in air ejection system.

4. In under a minute, customdesigned packaging is ready to protect your product during shipping and handling.

Instamolder™ High-Speed Cushion Molding System • Ideal for High Volume Packaging Operations • Up to 12 Molds Available • Up to 600 Cushions Per Hour • Floor Space Requirement: 50 Square Feet • Electrical Power: 30 AMP, 208-240 Volt A.C. 60 Hz Single Phase Dedicated Circuit • Receptacle Type: NEMA L6-30R • Air Requirement: 100 p.s.i. Clean Dry Air

Sealed Air® Support Services • Operator Training • Equipment Installation

• Package Design and Testing • Site Selection Assistance

Distributed By:

Customer Service Locations: CA, City of Industry, 909-594-1791 OH, Sharonville, 513-771-7770 CT, Danbury, 203-791-3550 Corporate Offices: Sealed Air Corporation, Park 80 East, Saddle Brook, NJ 07663-5291

www.sealedair.com

© Reg. U.S. Pat. and TM Off. © Sealed Air Corporation 2004. All rights reserved. Printed in the U.S.A. The “9 Dot Logo” and “Sealed Air” are registered trademarks of Sealed Air Corporation (US). SD-1 Rev. 8/04