Fill-Air Elite
™
Inflatable Packaging System
The Fast And Flexible Solution For Inflatable Packaging.
Fill-Air Elite™ Packaging System The Next Generation for Cost-Effective Void Fill
Increase Cushion Output For Multiple Stations
Change Film Rolls In Two Easy Steps
The automated Fill-Air Elite system provides a flexible batching option that enables operators to continually fill portable bins and deliver them whenever and wherever they are needed. ™
Compact And Versatile Small footprint fits into any packaging area and can produce cushions for single or multiple workstations.
Easy To Use Quickly inflates cushions from a continuous roll of perforated film. Minimal training required.
Automated Inflation Provides Cushions On Demand A photoeye signal guarantees a supply of cushions. The system auto-replenishment mode automatically provides a continuous flow of cushions to increase productivity. All Electric — Easy To Install Just plug into a standard 110-Volt outlet to make inflated cushions. No shop air required.
Assured Customer Appeal Clear inflatable cushions provide attractive packaging compared to other messy and bulky void fill materials.
1. Slide off empty roll, slide new roll of film onto mandrel and screw on end cap. Place the mandrel into the roll cradle.
2. Feed the edge of material into the system and push feed switch to begin the inflation process.
A Wide Selection Of Standard Cushion Sizes Bag Size (in.) Size (cm.) Elite 200-5 8" x 5" 20cm x 13cm Elite 200-8 8" x 8" 20cm x 20cm Elite 200-12 8" x 12" 20cm x 30cm Elite 250-5 10" x 5" 25cm x 13cm Elite 250-12 10" x 12" 25cm x 30cm
Specifications
Overall Size (W x D x H):
18.75" x 35.0" x 15.0" .48m x .89m x .36m
Power Requirements:
110 V – Single Phase, 2A, 50/60 Hz
Weight:
47 lbs. 21.4 kg.
Distributed by:
Protective Packaging Division 301 Mayhill Street Saddle Brook, NJ 07663-5303 800-648-9093 Fax: 201-712-7070 www.sealedair.com Our Products Protect Your Products
®
Corporate Office: Sealed Air Corporation Park 80 East, Saddle Brook, NJ 07663-5291
www.sealedair.com
® Reg. U.S. Pat. & TM Off. © Sealed Air Corporation 2004. All rights reserved. Printed in the U.S.A. The "9 Dot Logo" and "Sealed Air" are registered trademarks of Sealed Air Corporation (US).
D-169 Rev 9/04