Scooptram Rrc
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Scooptram Rrc as PDF for free.
More details
- Words: 801
- Pages: 3
Atlas Copco Aftermarket products
Scooptram RRC - Radio Remote Control
Introduction As a step on the continuous strives to improve productivity for our Customers safety and the working environment for the operator, Atlas Copco can now offer Scooptram RRC, a remote control system for our line of Scooptrams. Scooptram RRC offers an effective way of operating inside stopes and areas exposed to risks of falling rock. By standing in a safe area, away from the equipment, the operator can continue to muck until the stope is empty, thereby getting maximum ore recovery. Additionally, for narrow stopes, all mucking can be carried out along the orebody, which means that costly cross cut development in waste rock can be reduced.
With controls that resemble those in the cab, Scooptram RRC is an easy to use and reliable system. Its low weight and the adjustable harness gives the user an ergonomic working position. Powered by regular rechargeable AA batteries, it has an operating time over eight hours. To further extend the service of the product we can now offer our Customers RRC Service Exchange to keep a high utilisation of the product. By creating a Scooptram RRC Kit where all parts are included, the order and logistic handling is simplified. – “One Service One Number”.
Scooptram RRC - Specification
Scooptram RRC - Specification
Scooptram RRC Kit – “One Service One Number” To simplify the ordering process and guarantee that everything is included for the RRC Installation, a Scooptram RRC Kit has been designed to suit each Scooptram. This means that everything can be ordered as one part number only.
The Scooptram RRC monitor is a tool for fast troubleshooting on the machine. It shows the signals to and from the Machine Unit and it shows both the RRC’s and the machine’s condition. The Scooptram RRC Monitor Kit, PMI number 9106 2017 90, contains one monitor and two harnesses.
Beacon-Red Strobe – Flash Light Antenna
Harness Belt
OU – Operator Unit Hydraulic Interface
RRC Service Exchange To ensure high utilization of your operating Scooptrams we have set up a RRC Service Exchange for the Operator and Machine Unit. If the Unit stops and needs to be repaired we will send a repaired working Unit immediately from our stock to you. • All units in the Service Exchange are repaired, function tested and cleaned. • Units are exchanged at a fix price.
MU – Machine Unit
NON WORKING
Together with the Scooptram RRC Kit the only additional thing needed is the Hydraulic RRC Installation Kit, (Hydraulic Interface). As the Hydraulic RRC Installation Kit might already be installed on the machine from the factory, this has to be verified. Following Scooptrams have been configured with Scooptram RRC Kit: Scooptram Model
Scooptram RRC Kit
Hydraulic RRC Installation Kit
ST2G ST3.5
5580 0088 00 5580 0083 35
ST710 Canopy ST710 Cab
5580 0100 18 5580 0100 97
5572 7585 00 5572 7585 00
ST1020/ST1030
5580 0085 83
5575 3984 00
ST8B
5580 0084 98
5574 4982 00
ST14
5580 0083 98
Not needed
ST1520
5580 0082 43
5575 4616 00
Comment
5575 4856 00 To be verified before order 4 different options To be verified before order
Atlas Copco RRC Shop
Atlas Copco
To be verified before order WORKING
Customer
Scooptram RRC - Specification “Features and Benefits” Operator features: • A fully proportional system. • A built in Operator Unit test mode for enhanced trouble shooting. • A high level safety protocol reducing the risk for the operator and those around him. • A low weight Operator Unit. • An ergonomically improved working position. • Long operating time using normal rechargeable AA batteries. • The possibility to configure valve currents directly from the Operator Unit. Safety features: • An enabling function on the main Scooptram console to prevent involuntary movement • A tilt sensor and dead-man’s-handle that triggers the machine to stop if the operator should fall. • Constantly monitored 2-way digital communication that will stop the machine if communication is lost or delayed by more than half a second. • Monitoring of the battery power-pack that shuts down the system well before any risk of functionality occurs. • An idle time monitor that shuts off the Operator Unit after 5 min, if left with power on. • IP class 65 water/dust protection enclosures.
Height: Width: Length: Weight: Operating temperature: Storage temperature: Operating time:
120 mm 200 mm 300 mm 7 kg -24 - 70°C -40 - 85°C >8 hrs
Operator unit Height: Width: Length: Weight: Operating temperature: Storage temperature: Operating time: Range:
www.atlascopco.com/cmtportal
174 mm 420 mm 233 mm 3,8 kg incl batteries -20 - 50°C -40 - 85°C >8 hrs >60 metres
9851 2536 01a
Machine unit
The manufacturer reserves the right to make modifications without prior notice. © Atlas Copco Rock Drills AB 05/2008
Technical information
Scooptram RRC - Radio Remote Control
Introduction As a step on the continuous strives to improve productivity for our Customers safety and the working environment for the operator, Atlas Copco can now offer Scooptram RRC, a remote control system for our line of Scooptrams. Scooptram RRC offers an effective way of operating inside stopes and areas exposed to risks of falling rock. By standing in a safe area, away from the equipment, the operator can continue to muck until the stope is empty, thereby getting maximum ore recovery. Additionally, for narrow stopes, all mucking can be carried out along the orebody, which means that costly cross cut development in waste rock can be reduced.
With controls that resemble those in the cab, Scooptram RRC is an easy to use and reliable system. Its low weight and the adjustable harness gives the user an ergonomic working position. Powered by regular rechargeable AA batteries, it has an operating time over eight hours. To further extend the service of the product we can now offer our Customers RRC Service Exchange to keep a high utilisation of the product. By creating a Scooptram RRC Kit where all parts are included, the order and logistic handling is simplified. – “One Service One Number”.
Scooptram RRC - Specification
Scooptram RRC - Specification
Scooptram RRC Kit – “One Service One Number” To simplify the ordering process and guarantee that everything is included for the RRC Installation, a Scooptram RRC Kit has been designed to suit each Scooptram. This means that everything can be ordered as one part number only.
The Scooptram RRC monitor is a tool for fast troubleshooting on the machine. It shows the signals to and from the Machine Unit and it shows both the RRC’s and the machine’s condition. The Scooptram RRC Monitor Kit, PMI number 9106 2017 90, contains one monitor and two harnesses.
Beacon-Red Strobe – Flash Light Antenna
Harness Belt
OU – Operator Unit Hydraulic Interface
RRC Service Exchange To ensure high utilization of your operating Scooptrams we have set up a RRC Service Exchange for the Operator and Machine Unit. If the Unit stops and needs to be repaired we will send a repaired working Unit immediately from our stock to you. • All units in the Service Exchange are repaired, function tested and cleaned. • Units are exchanged at a fix price.
MU – Machine Unit
NON WORKING
Together with the Scooptram RRC Kit the only additional thing needed is the Hydraulic RRC Installation Kit, (Hydraulic Interface). As the Hydraulic RRC Installation Kit might already be installed on the machine from the factory, this has to be verified. Following Scooptrams have been configured with Scooptram RRC Kit: Scooptram Model
Scooptram RRC Kit
Hydraulic RRC Installation Kit
ST2G ST3.5
5580 0088 00 5580 0083 35
ST710 Canopy ST710 Cab
5580 0100 18 5580 0100 97
5572 7585 00 5572 7585 00
ST1020/ST1030
5580 0085 83
5575 3984 00
ST8B
5580 0084 98
5574 4982 00
ST14
5580 0083 98
Not needed
ST1520
5580 0082 43
5575 4616 00
Comment
5575 4856 00 To be verified before order 4 different options To be verified before order
Atlas Copco RRC Shop
Atlas Copco
To be verified before order WORKING
Customer
Scooptram RRC - Specification “Features and Benefits” Operator features: • A fully proportional system. • A built in Operator Unit test mode for enhanced trouble shooting. • A high level safety protocol reducing the risk for the operator and those around him. • A low weight Operator Unit. • An ergonomically improved working position. • Long operating time using normal rechargeable AA batteries. • The possibility to configure valve currents directly from the Operator Unit. Safety features: • An enabling function on the main Scooptram console to prevent involuntary movement • A tilt sensor and dead-man’s-handle that triggers the machine to stop if the operator should fall. • Constantly monitored 2-way digital communication that will stop the machine if communication is lost or delayed by more than half a second. • Monitoring of the battery power-pack that shuts down the system well before any risk of functionality occurs. • An idle time monitor that shuts off the Operator Unit after 5 min, if left with power on. • IP class 65 water/dust protection enclosures.
Height: Width: Length: Weight: Operating temperature: Storage temperature: Operating time:
120 mm 200 mm 300 mm 7 kg -24 - 70°C -40 - 85°C >8 hrs
Operator unit Height: Width: Length: Weight: Operating temperature: Storage temperature: Operating time: Range:
www.atlascopco.com/cmtportal
174 mm 420 mm 233 mm 3,8 kg incl batteries -20 - 50°C -40 - 85°C >8 hrs >60 metres
9851 2536 01a
Machine unit
The manufacturer reserves the right to make modifications without prior notice. © Atlas Copco Rock Drills AB 05/2008
Technical information
Related Documents
Scooptram Rrc
April 2020 2
Scooptram Rrc
April 2020 1
Rrc Training Component
November 2019 16
Cen-rrc-01-2019-corrigendum.pdf
June 2020 1
Rrc Kurchatov Institute, Moscow, Russia
May 2020 2