Resume Arifin

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

ARIFIN MARZUKI PRINCIPAL ENGINEER Position:

Principal Engineer

Years of Experiences:

11

Qualifications:

Bachelors of Science in Chemical Engineering Drexel University, Philadelphia, Pennsylvania, USA.

Nationality:

Malaysian

Age:

33

PROFESSIONAL EXPERIENCES Oct 2005 – Present Principal Engineer/Advisor for the following projects: 1. Provision of Semarang Offshore Platform Benefit Study for PETRONAS CarigaliSabah Operation    

Development of Pipephase model for 80 wells (including black oil model) and pipelines Development of Pro-II model for topsite separation, compression and utilities. Development of network optimization model by Integrating pipephase and pro-II Perform optimization and sensitivity analysis

2. Provision of Development of Pipeline, Steady State and Dynamic Simulation models for Temana Offshore Platform for PETRONAS Carigali – Sarawak Operation       

Model conversion of Pipesim models into Pipephase model Development of Pipephase model for 10 pipelines (single phase and multi phase) Development of Steady State model based on design data using Simsci Pro-II Development of Steady State model based on actual plant data using Simsci Pro-II Development of dynamic model based on design data using Simsci Pro-II Development of dynamic model based on actual plant data using Simsci Pro-II Conduct pipephase, steady state an dynamic simulation training

3. Provision of Simulation Model Conversion (pipeline, steady state and dynamic models) for Petronas Carigali Sdn Bhd – Sarawak Operations from HYSYS to Simsci Pro II. The following facilities covered under the project:

Scientige Sdn Bhd

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

     

Bayan Bakau BNGB D-18 Tukau West Lutong

4. Provision of Equipment Based Pressure Relief Device Analysis for PSR-1 and PSR-2 of Petronas Penapisan (Melaka) Sdn Bhd.     

Identification of relief valve Scenarios based on API 520, 521 Identification of relief rate Development of database and relief valve analysis and using Berwanger PPM software for 1750 Relief Valves Development of Flare Hydraulic models Development of Flare QRA model

5. Provision of Data Management for Petronas Risk Based Inspection (P-RBI) for Petronas Carigali Sdn Bhd – Sarawak Operations.     

Data gathering and consolidation for 27 offshore platforms PID mark-up and process data reconciliation Offshore walk through site verification and visual inspection Identifying corrosion loops Managing and reconciliation of inspection data

6. Provision for Area Development Plan for 14 gas fields for Petronas Carigali Sdn Bhd  Technology scouting for CO2, Sand, H2S, Mercury removal technology  Development of OGM model (Oil and Gas Manager software) for 14 gas fields to evaluate the optimum cost  Development of economic models  Development of basis of design  Development of pipeline model  Development of steady state model  Development of design basis PETRONAS RESEARCH & SCIENTIFIC SERVICES SDN BHD October 1998 – September 2005 Business Development : October 2004 – September 2005 Primary Tasks : 1. Formulating marketing plans and processes to ensure continuous stream of revenues

Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

2. Developing commercial proposal, managing and coordinating technical proposal and responsible for overall techno-commercial proposal. 3. Developing and securing long term service agreement on Topside(surface) specialized study 4. Responsible for Overall ITB (Invitation to Bid) package documents including contracts term and conditions 5. managing clients by building and maintaining close business relationship at all levels and providing solutions to the clients problems 6. Identify new business opportunity in the Niche Technology Area 7. Responsible to bring in RM 42.5 Million annual revenue by marketing & promoting consultancy services and R&D services in the following area : Process Technology : Separation & Purification, Catalysis, Energy Management, Process Simulation & Optimization, Flow Assurance, Utility & Water Technology. Facilities Engineering : Risk Bask Inspection, Fit For Fitness Services, Corrosion Management, Pipeline Engineering & Structure Engineering. Environmental Management : Environmental Impact Assessment (EIA), Environmental Management Plan (EMP), Waste Treatment, Hazardous Spills & TENORM monitoring. Technical : October 1998 – September 2004 Started as Chemical Engineer in 1998 and appointed and promoted to Senior Chemical Engineer since 2001. Undertaking various projects in upstream and downstream activities. Upstream Activities: Primary Tasks : Lead oil & gas production and processing facilities projects in the area of : 1. 2. 3. 4. 5. 6. 7.

Asset Performance assessments Process Simulation (steady State & dynamic) Pipeline Simulation (steady State & dynamic) Operator Training Simulator HAZOP Analysis Process Safety system Optimization & Enhancement

Dulang Bravo Offshore Facilities Revamping and Optimization Project – PETRONAS Carigali Peninsular Malaysia Operations (PCSB-PMO) Lead and responsible for the revamping and optimization project for Dulang-B processing facilities. Develop the master plan for Revamping and Reliability process. Perform high level assessments and Identify detail optimization projects to increase daily productions. Prepare project economic for the revamping and optimization plans.

Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

Dynamic Simulations for Southern Assest Offshore Facilities (Tukau, West Lutong & Bakau) - PETRONAS Carigali Sarawak Operations (PCSB-SKO) Lead and guide junior process engineers to develop steady state and dynamic model for Tukau, West Lotong and Bakau processing facilities. Monitor project progress, project cost and quality of work. Coach junior process engineers on simulation results interpretation. Conduct Process HAZOP analysis using dynamic simulations. Integrated Steady State & Pipeline Simulation For SBO Offshore Facilities PETRONAS Carigali Sabah Operations (PCSB-SBO) Lead and guide junior process engineers to develop steady state simulation for surface facilities and pipeline simulation for single phase flow. Integrate pipeline model and process model and conduct case study. Monitor project schedule, project cost and quality of work. Identify potential improvement to increase daily productions. Identify any bottle neck area and propose solutions. Dulang D – Low Pressure optimization Project. PETRONAS Carigali Peninsular Malaysia Operations (PCSB-PMO) Lead and responsible for the conversion of test separator into production separator and installation of new LP header and new main oil line pump. Verify design capacity on the new method adopted. Check and verify venting system and modify necessary process requirement to conform to the statutory regulations. Conduct Process HAZOP Analysis. Training Simulator for ANGSI production facilities (Oil & Gas

Platform)

Developed Distributed Control System (DCS) communication driver between FisherRosemount (Delta V- Intellution iFIX) and HYSYS.Plant+. Designed and developed unit operations faceplate, detail page, group trending and history and alarm summary. Developed safeguarding logic in simulation software environment and interfaced it in Man Machine Interface (MMI) environment. Developed process graphics and schematics. Configured and set-up DCS database. Performed Factory Acceptance Test (FAT) and Site Acceptance Test (SAT) for MMI and DCS communication. Tested platform shutdown and startup procedure using the process trainer. Tested process malfunctions and performed process up-set recovery. Dynamic Simulations for PM9 Assest Offshore Facilities (Bekok, & Pulai) - PETRONAS Carigali Peninsular Malaysia Operations (PCSB-PMO) Developed Steady State and dynamic simulation for Bekok and Pulai Platform. Incorporated operating data and fine tune to match plant operating data. Coached PRSS junior engineer Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

on steady state and dynamic model development. Performed acceptance tests and delivered short course to clients. DULANG-D (oil & gas platform) optimization project & Dynamic Simulation for DUYONG and TIONG offshore facilities for PETRONAS Carigali Peninsular Malaysia Operations (PCSB-PMO) Steady state and dynamic simulation consultant to PTS2 process engineers, Kertih Regional Office. Conducted sub-surface and topside DULANG-D optimization studies to increase barrel intake from currently no flowing wells with minimal cost of operation. Optimized platform current operating parameters to re-initiate no flowing wells to flow and maximize production. Successfully performed field trial based on simulation findings and achieved oil production above than the targeted production. Conducted study on liquid carry over to onshore gas terminal, glycol loss in glycol regeneration system and mist carryover to flare tip. Conducted drag reduction study to increase delta P in pipeline and performed the field trial. Developed DUYONG and TIONG dynamic process facilities (platform wide) simulation model based on design data and current operating conditions. Downstream Activities: Development of PETRONAS Steady State Simulation Software at VMG Calgary, Alberta, Canada Initiated the idea of PETRONAS Steady State Development Project with cost saving to PETRONAS at least RM 5 Million annually and value creation to PRSS of more than RM 2 Million in annually. Developed PETRONAS Steady State Simulator based on open source code concept. Designed, developed, code and test unit operations algorithm, proprietary property package for Benfield, communication driver, graphical user interface (GUI) and third party software interface. Wrap-up and compile source code for commercial deployment. Run series of testing and Quality check on unit operations algorithm and GUI. Test the developed software interfacing with Delta V through Microsoft Excel. Performed pilot run on Pilot Plat Distillation Unit connecting to PetronasSim and test life data communication. Conducted series of Beta Test session. Organize training and workshop and taught PETRONAS process engineers on the newly developed software. Promote and market the software. Benfield Simulation Project for Gas Processing Plant A Developed Benfield model using Hysys 3.1 and OLI property package. Fine-tuned the model to match actual operating data and run case studies to identify the root cause of the loss of Benfield solution in the closed loop system. Palm Diesel Training Simulator Project for Malaysian Palm Oil Board Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

Play advisory role for the development of Palm Diesel Training Simulator System. Trained and taught engineers and trainee engineers on HMI, Ifix intellution, Communication Driver, OTS database, Schematics development, and OTS networking. Development DCS based Operator Training Simulator for Propane Dehydrogenation Plant (PDH) at AEAT Houston, Texas, USA. Integrate Feed Treatment dynamic simulation model with YOKOGAWA CENTUM 3000 Distributed Control System. Fine-tune controller in simulation model to external execution based on YOKOGAWA emulated controller algorithm. Develop process mal-function exercises and perform process up-set recovery. Validate unit shutdown and startup procedures and recommend necessary changes. Validate and verify unit control strategy and philosophy. Perform process HAZOP analysis and crosscheck safeguarding logic and emergency shutdown matrix. Train plant shift supervisors and process engineers on process malfunctions, startup and shutdown execution, and emergency shutdown procedure using the simulator. Engineering Simulator Development for Propane Dehydrogenation Plant (PDH) at AEAT (Hyprotech) Houston, Texas, USA. Developed dynamics simulation model for Feed Treatment section. Modelled Feed Guard Beds, Feed Driers and Regeneration System, Depropaniser column and Debutaniser column using Hyprotech’s HYSYS.Plant+ dynamic simulation package. Verified start-up and shutdown procedures using the simulator. Verified control algorithm and control strategy using the engineering dynamic model. Developed Feed Treatment process graphics using DataView. Linked Feed Treatment simulation model to process graphics using simcoordinator and simserver. Successfully performed FAT and SAT. Plant wide steady state modeling for PETRONAS Methanol Labuan PETRONAS Methanol Labuan. Tuned and optimized steady state simulation model of steam reforming unit, methanol synthesis unit and methanol purification unit to match actual operating parameters. Performed steady state study on methanol distillation column. Integrated utilities (steam) to process unit and conducted heat exchanger efficiency study. COGNIS (Formerly known as HENKEL CORPORATION RESEARCH AND DEVELOPMENT), AMBLER, PENNSYLVANIA, USA. March 1996 – Sept 1998 : Process Engineer

Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

Responsible for a new polyamide/polyurethane alcohol soluble resin systems for solvent borne ink applications. Designed and developed low solids waterborne polyamide dispersion process for ink applications. Developed high solids water borne acrylic polyols dispersion process for coating applications. Responsible for a new and proprietary environmentally sound non-acrylate based curable system for adhesive applications. Formulate new UV pressure sensitive adhesive and UV laminating adhesive formulations. Participate actively in developing laboratory techniques and manufacturing process. ROHM AND HAAS RESEARCH LABORATORIES, SPRING HOUSE, PENNSYLVANIA, USA. March 1995 - September 1995 : COOP Process Engineer Synthesized copolymers by solution free radical techniques on laboratory and pilot scale. Improved the optimum conditions for hydraulic fluid filtration process. Performed analysis and evaluation of the test results. Technical Paper Publications INTERNATIONAL Arifin Marzuki, Shahrul Azman, Norfaizah A Manan, Nuruzul Izzi Alias, “Development of PETRONAS Steady State Software”, Engineering Information Management Conference, October 5th, 2004-11-09 Chase J. Bourdreaux, Arifin Marzuki, E. Nowicki, D.Devore, S. Shah and Yamin Zhong, “Waterborne 2K Acrylic Polyurethanes : Lowel Low-NCO/-OH Systems”, Waterborne, Higher –Solids, and Powder Coatings Symposium, February 18-20, 1998, New Orleans, LA, USA. N.Chen, Arifin Marzuki, R. Narayan, U. Varlemann, “ Aliphatic Carboxyl Acrylates for Radiation Cure Pressure Sensitive Adhesive” Henkel Technical Symposium, October 5-7, 1998, San Diego, CA, USA. Malaysia Shahrul Azman, Arifin Marzuki, Norfaizah A Manan, Nuruzul Izzi Alias, “Challenges in developing PETRONAS Steady State Simulation Software”, Institute of Engineers Malaysia Symposium, Kuala Lumpur, Julyl 2004. Shahrul Azman, Arifin Marzuki, Norfaizah A Manan, Nuruzul Izzi Alias, “Development of membrane unit operation in PETRONAS Steady State Software”, Mambrane Science & Technology Symposium, Johor Bahru, April 2004. INTERNATIONAL PATENTS 1. Energy-curable composition for making a pressure sensitive adhesive

Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087



An energy-curable polymer-forming composition for making a pressure sensitive adhesive includes an unsaturated oligomer resin and adhesive promoter which increases the peel strength of the adhesive without reducing its tack. The composition also includes a tackifier and various other optional components such as photoniator, chain extender, reactive diluent and the like.

 

United States Patent 6429235



Publication date : 8th June 2002

PROFESSIONAL TRAINING & COURSE Course Taught : Instructor For 1. Appointed as PETRONAS Line of Instructors for: 2. Skill Group 16 (Chemical Engineers), Level 2, Thermodynamic Course 3. Skill Group 16 (Chemical Engineers), Level 2, Plant Performance and Optimization Course 4. Skill Group 16 (Chemical Engineers), Level 3, Dynamic Simulation Course. 5. Instructor for Steady State Simulation for ICON (PETRONAS Steady State Software) and HYSYS. 6. Instructor for Dynamic Simulation for HYSYS.Plant+. 7. Instructor for Training Simulator System: Process modelling, process safeguarding and DCS interfacing for operations engineers and panel operators. Exhibitions Conducted Conducted Process Simulation & Training Simulator Exhibition in the following seminars and events: • • • • • •

•

SPE Conference, June 2004 PRSS, Technology Forum, April 2004 PETRONAS RESEARCH Open Day, August 2003 PETRONAS Petrochemical Plant Conference, July 2002 PETRONAS CARIGALI SABAH- TECHNOLOGY BAZAR, 2002 PETRONAS 12th InterPlant Workshop, October 2001 PETRONAS RESEARCH Open Day, August 2000

TRAINING & CERTIFICATE Relevant Training Attended 1. PETRONAS Skill Group Training for Process and Chemical Engineers: • Integrated Process Design • Equipment Selection & Sizing • Safety in Process Design Scientige Sdn. Bhd.

process

PROVISION OF DEVELOPING THE HSE CASE FOR TUKAU, WEST LUTONG, SIWA, BAKAU, BAYAN, D18, TEMANA AND E11RC FOR PETRONAS CARIGALI SDN. BHD. – SARAWAK OPERATIONS TENDER NO.: S07/H/087

• • • • • • •

Thermodynamic course Fluid Flow Heat Transfer Project Economics Process Control & Instrumentation Plant Performance & Monitoring Water Technology

2. Thermodynamic Course by Virtual Materials Group, April 2004 3. HYPROTECH Scholar Program, by Hyprotech, Calgary, Canada, April-May 2002 4. Process Automation-Intellution Training, Singapore, August, 2000

Scientige Sdn. Bhd.

process