Project Proposal

CREATIVITY AND INNOVATION (BFC 23702) SEMESTER 2 SESI 2018/2019 SEKSYEN 2

PROPOSAL PROJECT SHOES RACK

PREPARED BY: GROUP 1 NAMA

NO MATRIK

MUHAMMAD RUZAIN BIN HAMIDON

CF170089

MUHAMMAD SYAZWAN BIN AHMAD SHUKRI

CF170047

KHAIRUL ANUAR BIN ISMAIL

CF170076

NOORASMAWANTY BINTI DAUD

CF170067

SHERRYLYN BINTANG JOSEPH

CF170118

PREPARED FOR: PROF. Dr. MOHAMAD YUSRI BIN AMAN SUBMISSION DATE: 24 MARCH 2019

Table of Content

No.

Content

Pages

1.

INTRODUCTION

1

2.

PROBLEM STATEMENT

2

3.

METHODOLOGY

4.

SOLUTION

6

5.

EXPECTED RESULT

6

3–5

PROJECT SHOES RACK

1.1. INTRODUCTION Recycling is the process of converting waste materials into new materials and objects. It is an alternative to "conventional" waste disposal that can save material and help lower greenhouse gas emissions. Recyclable materials include many kinds of glass, paper, cardboard, metal, plastic, tires, textiles, and electronics. For our project, we choose to produce a multifunction shoe rack. This is multifunction shoe rack will use a recyclable tank to build for compiling and arranging the shoes, boots, slippers neatly. This is multifunction shoe rack is very useful in environments with limited availability of space for an additional piece of furniture serving as an umbrella storage area and for decoration in our house. Our shoe rack is designed in a closed condition that can open when we want to keep or to use our shoes. The household problem of putting away shoes and always requiring a certain space is currently solved by this design.

1.2. PROBLEM STATEMENT Basically, there are a lot of aspects need to be considered when designing the closed ‘Shoe Rack’. Design of the furniture is essential to ensure that it can easily be adapted for space layout. One major problem that can be seen in the ready-made design configuration of advanced shoe rack can’t be changed with the environment. Furthermore, the existing closed shoe rack product does not use the concept of DIY, usually this product is pre-install and caused difficulties to move or slipper the product for point to another point. The product introduces simple functional design and easy installation method by incorporation DIY method. The product is aimed be packed in a flat packed boxes that could fit in box boots of any for ease of transportation. Therefore, to overcome this problem, the modular design shoe rack is proposed so that this shoe rack can be adapted to the various aspects of the furniture layout. Through creativity and customer needs, they are able to combine the shoe rack in a various conditions based on various configuration of the shoe rack. (Snedd, 1992)

1.3. METHODOLOGY

Lecturer give a task

Discuss the task in group members

Brainstorm idea about the projeck

Select title project

Propose the title in proposal

Proceed the title after approved

1.3.1. Procedure 1.3.1.1. Cutting works Cut tank in half by using abrasive wheel on a grinder. An angle grinder like any power tool should be maintained in good condition and given a quick inspection before use. An angle grinder can be used instead of a bench grinder for sharpening blades, plus the consumable disks are much cheaper to replace than the grinding wheel (stone) on a bench grinder. In this situation by using grinder is useful for cutting and grinding such as:  Iron, steel and other metals  Metal roof cladding, corrugated iron and other steel sheeting  Brick, stone and concrete  Slates and building tiles  PVC waste pipe  Rusted bolts which can't be undone  Rebar in concrete  Grinding and sharpening garden tools  Welds on steel and also cleaning of welds

1.3.1.2. Sanding and wire brush accessories are used for:  Removing paint  Cleaning rust from steel  Sanding wood

1.3.1.3. Clean up the tank. Fill it up with water like the entire way and the important things is to make sure that initial cuts are in the water filled portion of tank. Once make a sufficient cut let the waters drain out and make sure to let it air out before wash it again.

1.3.1.4. Redesign the tank After finish clean up the tank, proceed to design that already have.

1.3.1.5. Put the slide of wood inside tong drum Then level each of the tank by using slide of wood to ensuring every level is stacked in order.

1.3.1.6. Paint the tank Finally, after finish all the method, re-paint the tank to make it more durable. Besides that, it also adds a beauty to the shoe rack and attracts the buyer's attention.

1.3.2. Use Personal Protective Equipment (PPE) Before proceed to the method, the important things that should do is protection to our body. Personal Protective Equipment (PPE) should be worn to protect your hearing, lungs, eyes, hands and feet from injury.

1.3.2.1. Eye protection. Safety goggles need to be worn to protect eyes from flying particles and sparks.

1.3.2.2. Ear Protection. Muffs or ear plugs will lessen the risk of hearing damage.

1.3.2.3. Hand Protection. Gloves provide protection from sparks, and small fragments of disk and waste metal thrown out by the disk. 1.3.2.4. Footwear. Wear steel toe cap shoes or boots with good grips.

1.3.2.5. Leather Apron. These protect clothes from sparks.

1.3.3. Main Materials And Apparatus Propose

Tong drum

Papan lapis

Botol plastik

1.4. SOLUTION As stated in problem statement, our group propose a new shoes rack to overcome it. The new design and function help improve daily human activity or needed that related. Sketch of proposal idea as below.

Innovation shoes rack 1.5. EXPECTED RESULT This design is invented to save space in our house or office which is it only used small space to place it. Shoe racks are used to look neat and tidy in every home, office or any place according to their requirements. This project is more focused in save space design closed shoe rack and easily lifted. In general, this shoe rack will be more focused on using recyclable materials to produce, durable, easier installation and more attractive.