Fédération Internationale De Motocyclisme Graphic Charter

FÉDÉRATION INTERNATIONALE DE MOTOCYCLISME 11 route Suisse CH-1295 MIES SUISSE

Tél. +41 (0)22 950 950 0 Fax +41 (0)22 950 950 1

-

C/080/2007 GM/jst

E-mail: [email protected] [email protected] http://www.fim.ch

To all the FMNs To the CONUs To the Management Council Members (for info) To the Commission and Panel Members (for info) To the FIM Promoters

5 October 2007

Modernised FIM logo to be used as from 1.1.2008 Dear Sir or Madam, At the 2006 FIM Congress in Salvador, the General Assembly approved the principle of adopting a modernised logo for the FIM. A mandate was given to the Management Council to select and decide on the final logo design taking into consideration the modern requirements of a federation with new ambitions. We are pleased to announce that the modernised FIM logo, that has been selected by the Management Council and which will be used as from 1.1.2008, has been published on the FIM website (under FIM Graphic Charter). This logo was created with the intention of providing a symbol of unity and a graphical representation of community, harmony and balance. It preserves the main elements of our traditional symbols always present in previous versions of the FIM logo: wings, wheel, laurels and cylinder. We kindly request all FMNs, CONUs, Promoters, etc. to make every effort to use exclusively the new FIM logo as from 1.1.2008 and to follow scrupulously the requirements for its use as laid down in the attached Graphic Charter. This Graphic Charter can also be found on the Member Area of the FIM website that can be accessed by typing your password and access code. Then select the first menu to your left "FIM Graphic Charter". A CD-ROM will be available at the Biennial Session which includes the full Graphic Charter. Kindly help us by using and respecting the new FIM modernised logo! With best regards,

Guy Maitre Chief Executive Officer (electronic signature)

Enclosures: FIM Graphic Charter

FIM IDENTITY SYSTEM

Our Identity The logotype of the FIM is the FIM's official hallmark. As such it indicates intellectual property belonging to the FIM. It can therefore only be used for purposes or for events that are expressly approved or sanctioned by the FIM. This logo was created with the intention of providing a unifying symbol, a graphical representation of community, harmony and balance. Conserving the best elements of the traditional symbols of wings, wheel, laurels and cylinder, it was adapted to meet the modern requirements of a federation with new ambitions. The symbol is confident and dynamic, and projects the prestige of a long tradition. Thu, Sep 27, 2007 © Vert Pomme

FIM IDENTITY SYSTEM

1. Official Logo Here is the basic, official version of the FIM logo to be used for printed materials. The production of articles carrying the FIM Logo (clothes, miscellaneous articles) is, as a matter of principle, exclusively restricted to the FIM, its affiliated members and its authorised partners. Competition organisers wishing to produce articles carrying the FIM logo will only be authorised to do this if: 1. The logo of the competition is also printed on the article(s), and 2. The proposed design is submitted to the FIM for approval, together with the request to make use of the FIM logo (see " Download "). Four-colour Process (cmyk) 0C/0M/0Y/100K 100C/60M/0Y/0K 39C/14M/0Y/0K Ref. FIM_logo_cmyk.eps

3 colours (Black + 2 Pantone colours) Black PANTONE 2935 PANTONE 278 Ref. FIM_logo_3C.eps

1 colour, black

Ref. FIM_logo_1C_black.eps

1 colour flat, black

Ref. FIM_logo_1C_flat.eps

FIM IDENTITY SYSTEM

2. Official Logo Four-colour Process (cmyk), reverse

Ref. FIM_logo_rev_cmyk.eps

1 colour, black, reverse

Ref. FIM_logo_rev_1C_black.eps

FIM IDENTITY SYSTEM

1. Logo Usage This FIM logotype is our shared distinctive symbol throughout the world. It is therefore essential that everyone should recognize it immediately. Any variation from the norm is consequently absolutely prohibited. You will find portrayed below a few examples of things to avoid in order to keep our identity intact. It is vital to preserve the design of this logotype, not to separate its constituent elements and to respect the spacing and proportions of the original. Spacing to be maintained

X = 1/3 of inner circle

Always leave a "breathing-space" (x) around the FIM logo; this space should be proportional to the size of the inner circle of the logo. You may also print an image as a background behind the framed logo as long as the logo remains clearly legible. Minimum permitted size Four-colour Process / 3 colours (Black + 2 Pantone colours)

1 colour, black

1 colour flat, black

The width ot the logo must not be less than 1/5 of the width of the document. The position of the logo is not defined. X = 1/5 of the width of the document.

FIM IDENTITY SYSTEM

2. Logo Usage Logo with background Colour, black and white or flat black logos can be applied to any kind of background, as long as the logos remain legible. Below are some examples of applications of the logo on colour backgrounds.

When the background is contrasting and makes the logo difficult to see, the logo must be used with the frame associated with the logo.

FIM IDENTITY SYSTEM

3. Logo Usage Things to avoid In all of cases, ensure that the logo is sufficiently legible. The examples below show the situations to avoid, because the logos are not legible enough.

Backgroud is too contrasting

The background colour is too similar to that of the logo.

The background is too broken up and makes the logo difficult to see.

FIM IDENTITY SYSTEM

4. Logo Usage Things forbidden

Do not change the proportions of the logo.

Do not deform the logo.

Do not change the orientation of the logo.

Do not change the colours of the logo.

Do not separate the constituent elements of the logo.

Do not use the old FIM logo any more.

FIM IDENTITY SYSTEM

1. Typeface Usage The use of the logo with the corporate name, is reserved for official FIM documents, (institutional brochures, reports, etc.), however, in certain cases, the logos below may be used. The rules for usage in the "Logo Usage" chapter also apply to these logos. Four-colour Process (cmyk), corporate name (standard size)

Ref. FIM_logo_type_std_cmyk.eps

Four-colour Process (cmyk), corporate name (large size)

Ref. FIM_logo_type_large_cmyk.eps

FIM IDENTITY SYSTEM

2.Typeface Usage Things forbidden

Do not modify either the font or the size of the text.

Do not modify the colour of the text.

FIM IDENTITY SYSTEM

1. Download Information If you have any questions or doubts concerning the use of our graphical elements, please explain your request by e-mail to [email protected], or directly by phone to +41 (0)22 950 95 00.

The following files are available on our Internet Site, Member area, menu "FIM Graphic Charter". Logo for printing (letterhead, business card etc...) - Four-colour process (EPS) - 1 colour black (EPS)

Logo for Word, Excel, PowerPoint (white backgrond) - 4 cm wide (JPG) - 13 cm wide (JPG)

Logo with transparency background for Word, Excel, PowerPoint - 4 cm wide (PSD) - 13 cm wide (PSD)

Logo for Web - 3 cm wide (GIF) - 5 cm wide (GIF) - 8 cm wide (GIF)

FIM IDENTITY SYSTEM

2. Download The following files are available on our Internet Site, Member area, menu "FIM Graphic Charter". Logos, Postscript EPS Illustrator CS, vectorised files Four-colour Process (cmyk) Ref. FIM_logo_cmyk.eps 3 colours (Black + 2 Pantone colours) Ref. FIM_logo_3C.eps Ref. FIM_logo_3C.ai (to use with InDesign) 1 colour, black Ref. FIM_logo_1C_black.eps 1 colour flat, black Ref. FIM_logo_1C_flat.eps Four-colour Process (cmyk), reverse Ref. FIM_logo_rev_cmyk.eps 1 colour, black, reverse Ref. FIM_logo_rev_1C_black.eps

Logos JPG Colour RGB, JPG (300dpi), 13cm wide, with outline path Ref. FIM_logo_rgb300_13cm.jpg Colour RGB, JPG (300dpi), 4cm wide, with outline path Ref. FIM_logo_rgb300_4cm.jpg

Logo with corporate name, Postscript EPS Four-colour Process (cmyk), corporate name, standard size Ref. FIM_logo_type_std_cmyk.eps Four-colour Process (cmyk), corporate name, large size Ref. FIM_logo_type_large_cmyk.eps