Notching Machinetap-6 Eng

NOTCHING MACHINE TAP-6/2 TAP-6/2 is designed for making corner joint notches for rectangular logs. Possible notching models: – Complete four-sided notching – Complete four-sided notching at log end – Side notching – Top notching / bottom notching The machine is equipped with four notching units, two on horizontal guides and two on vertical guides. Movements of the notching units are performed by means of hydraulic cylinders.

WORKING PRINCIPLE

TECHNICAL DATA Main dimensions Working level Weight

TEKNISET 1500 TIEDOT x 2100 x 2000 mm 1100 mm 1400 kg

Log position Log height Log thickness

horizontal 160 – 210 mm 90 – 180 mm

Motor powers - horizontal units - vertical units - hydraulic unit Total power

2 x 5,5 kW 2 x 7,5 kW 2,2 kW 28,2 kW

Saw dust outlet Suction air amount

1 x Ø200 mm ~ 10000 m3/h

Hydraulic pressure Output of hydraulic pump

150 bar 11 l/min

Vertical notching unit - shaft diameter - usable length of shaft - spindle speed - tool diameter

Ø 50 mm 160 mm 3920 r/min Ø 250 mm

Horizontal notching unit - shaft diameter - usable length of shaft

Ø 40 mm 170 mm

- spindle speed - tool diameter

5600 r/min Ø 160 mm

Compressed air requirement 240 Nl/min; 0,6 MPa Compressed air connection ½” Notching speed

22 - 35 sec/notching