Mlmkmlm.docx

Al-Rawas et al.,2005). Bauza, 2015). Baver, Gardner y Gardner (1973) Bell (1996) Beltrán, 2009 Bergaya et al. (2006) Berry y Reid (1993) Boardman et al., 2001). Budhu (2015) Budhu, 2010). Camacho et al. (2006 Jimenez y Crespo, 2013). Cokca, 2002). Crespo (2004) Dang et al., 2016). Das (2008) Das y Sobhan (2014)

Lista ASTM

AMERICAN SOCIETY FOR TESTING AND MATERIALS    

ASTM D 420 – 98 (Reapproved 2003) (Standard Guide to Site Characterization for Engineering Design and Construction Purposes). ASTM D 421 – 85 (Reapproved 2002) (Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants). ASTM D 422 – 63 (Reapproved 2002) (Standard Test Method for Particle-size Analysis of Soils). ASTM D 4220 – 95 (Reapproved 2000) (Standard Practices for Preserving and Transporting Soil Samples).

AMERICAN SOCIETY FOR TESTING AND MATERIALS  

ASTM D2216 – 98 (Standard Test Method for Laboratory Determination of Water (Moisture) content of Soil and Rock by Mass). ASTM D 4318 – 00: Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.



ASTM D 2487 – 00 (Standard Test Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)).

 

ASTM D3080 – 03 (Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions). ASTM D427-04 (Standard Test Method for Shrinkage Factors of Soils by the Mercury Method).

  

ASTM D4829 – 03: Standard Test Method for Expansion Index of Soils. ASTM D854 – 02 (Standard Test Method for Specific Gravity of Soil Solid by water Pycnometer). ASTM C 977 – 03 (Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization).



ASTM D 698 – 00: Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3)).



ASTM D 2435 – 03: Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading.



ASTM D 6276 – 99a (Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization).