Itr

EPRO INJECTION TUBE SYSTEM Permanent Cold Joint Waterproofing

Redundant Waterstop Protection • Injection only required if leakage occurs • Applicable in both dry and wet conditions • Tenacious bonding polyurethane sealant • Does not damage the concrete • Extremely durable and effective

1400 CAT

Uncured Product

Comp. A

Comp. B

Appearance ........................................ Solids .................................................. Density, g/ml ...................................... Flash Point, C/F ................................. Viscosity, cps ...................................... Mixing Ratio ....................................... Packaging ..........................................

Clear ............................. 100% ............................ 1.02 .............................. 156/313 ........................ 60-70 ............................ 1 part ............................ 5-gal. ............................

Dk. Brown .................... Clear 100% ........................... 100% ............................ 1.14 .............................. 1.16 .............................. 180/356 ........................ 165/335 ......................... 80-90 ........................... 50 .................................. 1 part ........................... 5% max. 5-gal. ........................... 5-gal.

ASTM D 1010 D 3800-79 D 93-85 D 1638-74

Cured Product Hardness, Shore D .......................................... Elongation, % ................................................... Tensile Strength, psi ........................................ Adhesive Strength to Concrete, psi ................. Corrosiveness .................................................. Storage ............................................................ Appearance ...................................................... Toxicity ............................................................. Resistance to Chemicals ..................................

OR

LD

OF DIFFE RE N

S

A

CE

W

R

EA

TI

R

Wa te r p r oo f i n g Sys tems

ON

FO

EPRO SERVICES P.O. Box 347 Derby, KS 67037 USA

20-30 >100 ................................................................................ ASTM D 638 260 .................................................................................. ASTM D 638 >260 Non-Corrosive Good storage stability at 15-30° C, 58-85° F. Store indoors. Dark Brown Polyurethane Sealant Essentially Non-Toxic in cured form. MDI Based, Drinking Water Approved. Resistant to Most Organic Solvents, Mild Acids, Alkali and Micro Organisms

LW ND ORLD CO

I

Phone: 800-882-1896 316-262-2513 Fax: 316-262-2529 web site: www.eproserv.com rev.: it 07.15.05

INJECTION TUBE Specifications 1. PRODUCT NAME

4. TECHNICAL DATA

6. AVAILABILITY AND COST

INJECTION TUBE SYSTEM

Properties: Not Available Coverages: Not Available

Contact the local distributor and/or Authorized Applicator for availability and cost.

Specification Writer: Contact EPRO Services before writing specifications on this product.

7. WARRANTY

2. MANUFACTURER

Basic Use: The Epro injection tube system is designed to be installed at the time of construction with the intent of providing the ability to inject polyurethane resin such as Epro PU403 after construction is completed to repair leakage at cold joints if it should occur or as a permanent preventive water stop measure. Composition: • A sturdy PVC hose withstands pressures up to 60 ft. of poured concrete. • A layer of tightly woven fabric (filter) prevents concrete particles from entering the tube. • Perforations in the hose which allows the resin to flow out the tube without loss of pressure. • A top layer of tough plastic fabric protects the filter fabric against damage. • The sleeves and screws provide for easy installation and resin injection.

Application: • Mix part A with part B at a ratio of 1 to 1. • Inject the resin mixture with approved high pressure injection equipment. • Insert screws after completing resin injection.

8. MAINTENANCE No maintenance required. 9. TECHNICAL SERVICES AND INFORMATION Complete technical services and information are available from EPRO Services.

Cleaning: Not Applicable

W

OR

LD

OF DIFFE RE N CE

Benefits: • Complete waterproofing of cold joints. • Easy installation with no damage to concrete. • Selective injection based on water leakage is an option. • Comprised of durable material with no metal components. • Cost effective.

Preparation: • Remove any loose debris. • Repair any concrete area prior to placement of the injection tube application. • Place tube in direct contact with concrete using clips or rebar and wire to hold in place every 12”. • The clips maybe attached using nails or epoxy adhesive. • Tension on the tube should be sufficient to prevent movement during concrete placement. • 30’ tube sections should overlap each other 12”. • Each PVC injection sleeve is attached to the end of each tube segment and is bent at 90° angle before exiting the surface of the concrete. • The PVC injection sleeve shall extend 1”-3” beyond the surface of the concrete.

TI

EA

R

Wa te r p r oo f i n g Sys tems

R

Limitations: • Must be installed in strict compliance with published guidelines. • Maximum tube length section 30 ft. • Injection sleeves must remain visible after placement of concrete.

ON

FO

S

3. PRODUCT DESCRIPTION

5. INSTALLATION

Limited Warranty: EPRO warrants this product to be free from defects. EPRO makes no other warranties with respect to this product, express or implied, including without limitation the implied warranties of MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. EPRO’s liability shall be limited in all events to supplying sufficient product to retreat the specific areas to which defective product has been applied. EPRO shall have no other liability, including liability for incidental or resultant damages, whether due to breach of warranty or negligence. This warranty may not be modified or extended by representatives of EPRO or its distributors.

A

EPRO SERVICES, INC. P.O. Box 347 Derby, KS 67037 PHONE: 800-882-1896 FAX: 316-262-2529

LW ND ORLD CO

I

Rev. IT.07.09.09