Sys3lw

epro • System III LW Blindside Waterproofing / Gas Barrier Excellent Strength and Durability • Exceptional Chemical Resistance • Seamless System • Exception Adhesion • Redundant Protection

System Description System III LW is a field installed composite waterproofing and gas vapor barrier that is comprised of a water-based Polymer Modified Asphalt (PMA) membrane applied to the back of a HDPE core and polypropylene fabric drainage composite which provides the durability and chemical resistance of HDPE with the constructability and installation efficiencies of a PMA. System Components Ecodrain-E (Outside Course) – An HDPE core and nonwoven polypropylene fabric drainage composite. Ecoline-S (Inside Course) – A spray or fluid applied, water based Polymer Modified Asphalt membrane. Additional Information Specifications – Reference “Specification Blindside Waterproofing”

Excellent Strength and Durability – The result of the unique field installed composite design. Extremely Chemical Resistant – The HDPE drainage composite is very resistant to most contaminates including VOCs. Seamless System – The fluid applied component makes the transition details and field waterproofing a monolithic installation. Exceptional Adhesion to the Structural Wall – The irregular surface of the composite system mechanically interlocks with the concrete wall to form a strong and permanent bond. Redundant Protection – Multiple waterproofing and gas vapor barriers as well as full wall drainage.

Detail Drawings – Reference all “LW” labeled Details

OR

LD

OF DIFFE RE N

R

EA

TI

R

Wa te r p r oo f i n g Sys tems

ON

FO

Installation Guidelines – Reference “Blindside Waterproofing Installation” and “Repair Procedures – Blindside Waterproofing”

S

A

CE

W

LW ND ORLD CO

I

800-882-1896 • www.eproserv.com

Product Information – Reference “Ecoline-S”, “Ecoline-R”, “Ecodrain-E” product brochures rev. sys3-lw120808

epro • System III LW - Blindside Waterproofing / Gas Barrier Epro Blindside Waterproofing / Gas Barrier Composite System Testing Composition HDPE drainage composite and polymer modified asphalt membrane. ( Ecodrain-E and Ecoline-S ) Compressive Strength ............................................................................. Same as Concrete/Shotcrete Flowrate ..................................................... ASTM D-4716 ................... 5.1 gal/min/ft Adhesion to Concrete** .............................. ASTM C-836 ......................42.631 lbf/in Chemical Resistance* ................................. Chlorinated Solvents Perchloroethylene Mass .................................... Compression Strength ......... Trichloroethylene Mass .................................... Compression Strength .........

ASTM D-543

% Change

ASTM D-5261 .................. 7.3% ASTM D-1621 mod. ......... 9.6% ASTM D-5261 .................. 4.7% ASTM D-1121 mod. .......... 6.0%

Aromatic Hydrocarbons Benzene Mass .................................... ASTM D-5261 .................. 4.1% Compression Strength ......... ASTM D-1621 mod. ......... 4.4% Hydrocarbon Gases Hydrogen Sulfide Mass .................................... ASTM D-5261 .................. 1.2% Compression Strength ......... ASTM D-1621 mod .......... .8% Chemical Permeation* ................................ ASTM F-739

Perm Rate - ug/cm2

Perm Rate - ml/day

Chlorinate Solvents Perchloroethylene ........................................................................... 80.99 ............................... 0.00094 Trichloroethylene ............................................................................ >125.02 ........................... >.00161 Aromatic Solvents Benzene ............................................... .......................................... >74.77 ............................. >.00159

OR

LD

OF DIFFE RE N

TI

EA

R

800-882-1896 • r.sys3lw_100908

R

Wa te r p r oo f i n g Sys tems

ON

FO

S

A

W

CE

* Testing performed by TRI Environmental ** Testing performed by Momentum Technologies

LW

O RL D C O

ND

I

www.eproserv.com