Faq: Correct A-331/a-341 Pcie To Sata Ii/300 Jumper Settings

FAQ: Correct A-331/A-341 PCIe to SATA II/300 Jumper Settings Original HTML document with live links available at: http://synchrotech.blogspot.com/2009/09/correct-331a -341 -pcie-to-sata-jumper.html Surprisingly, the instruction booklet that accompanies the A-331/A -341 PCIe to SATA devices causes some confusion among a very small segment of end users in terms of jumper settings for SATA port selection. Here is the text and images from the booklet: Note: There are four SATA ports in PCIe SATA II 300 2-Channel RAID Card. We named these ports A to D. Ports A & B are external SATA ports and C & D are internal SATA ports. By changing the jumper setting on Encore SATA2 RAID PCIe Card that allows you to select between external and internal ports to use. By default, Port C and D are working.

Reading the instructions, a few things stand out. First off, the instructions state that Ports C and D are the default settings, and hence the internal SATA ports are the out of the box configuration. To change a port, the entire bank grouping must be relocated (this is where most people are confused), in other words all jumpers from either bank (groups of four J1-J4, or J5-J8) need be in the same position (ie. all 1-2 OR all 2-3). To simplify this by providing the most obvious example. To switch from the default settings of both internal ports to both the external ports, one would move all the jumpers to position 1-2 closed. IN OTHER WORDS, MOVE EVERY JUMPER TO THE OPPOSITE POSITION THEY ARE ALREADY SET AT!

PCIE SATA II-ESATA 2/2

PCIE SATA II-ESATA 2/2 RAID

PCIE-ESATA2-01

PCIE-ESATA2-02

PCI Express to Serial ATA (eSATA II/300) 2/2 Port Host Adapter

PCI Express to Serial ATA (eSATA II/300) 2/2 Port Host Adapter with RAID

High performance card providing two channels with choice of two of four SATA/eSATA ports

High performance card providing two channels with choice of two of four SATA/eSATA ports with RAID 0,1 capabilities

Remember, A and C are mutually exclusive, as are B and D. Hence, a mixed one internal port and one external port configuration can only consist of A and D, OR B and C. PCI Express to Serial ATA (eSATA II/300) 2/2 Port Host Adapters

© Copyright 2009 Synchrotech, all rights reserved. Synchrotech, a Division of Synchronized Technologies, Inc. http://www.synchrotech.com/ 3333 Wilshire Boulevard, Suite 806 Los Angeles, CA 90010 TEL: 213.368.3760 TEL USA: 800.793.9207 FAX: 213.368.3765