Eie Instruments Pvt Limited

+=============================================+================================+ |To : ADANI POWER LTD (KUTCH) | Q U O T A T I O N | | 4X330 MW MUNDRA THERMAL POWER PROEJCT |--------------------------------| | MUNDRA | No : EIEPL/7310/2007 | | |--------------------------------| | DIST : KUTCHH - , GUJARAT | Date : 18/04/2008 | +---------------------------------------------+--------------------------------+ | Attention : MR. K.P.CHAKERWARTI | G.S.T.: | | | C.S.T.: | +---------------------------------------------+--------------------------------+ | Enquiry No. : EMAIL Dated : 18/04/2008 Due On : / / | +==============================================================================+

Dear Sir,

We thank you for your above mentioned enquiry and are pleased to quote as detailed below, subject to the terms and conditions mentioned hereunder. ================================================================================ Sr. Description Price -------------------------------------------------------------------------------1 LOS ANGELES ABRASION TESTING MACHINE IS:2386(PART IV) 60000.00 Consists of a hollow steel cylinder, closed at both ends, having an inside diameter of 700 mm and inside length of 500 mm. The cylinder mounted on a sturdy frame on ball bearings. The opening will be closed dust tight with a removable bolted cover in place. A detachable shelf which extends throughout the drum catches the abrasive charge and does not allow it to

fall on the cover. The drum is rotated at a speed of 30-33 RPM. by an electric motor through a heavy duty reduction gear. Fitted with counter and push button starter. Supplied complete with a tray for collection of the material.

Abrasive Charge :

Consists of set of 12 Nos. cast iron spheres or steel speheres (Hardened steel balls) approximately 48 mm daimeter each weigh between 390-445 gram. Complete as above.

2 SIEVE SHAKER (GYRATORY) EIE-1807A FOR 15 TO 20 CM SIEVES 12500.00 This sieve shaker is designed to carry up to 7 sieves of 6 inch or 8 inch diameter. The 12 inch dia.sieves can be used with the help of Adaptor. A 1/4 HP.motor through a reduction gear immersed in oil drives the shaker. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed. the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward and downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder is supplied. The holder can be fixed on the top of the upper most ================================================================================

Cont....

Page No : 2 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------sieves, and thus the sieve set is firmly held. Suitable for operation on 230 volts, 50 cycles single phase A.C. Supply.

OPTIONAL EXTRA

DIGITAL Time switch 0-99 minutes for above, Rs.4000.00 MECHANICAL Time switch 0-60 minutes for aboveRs.1440.00

EIE-1807 A FOR 45 CM DIA SIEVES 19500.00 This sieve shaker is designed to carry up to 7 sieves of 18" diameter. The shaker is driven by a 1/2 H.P.Electric Motor through a reduction gear. The sieve table does not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in the clockwise direction, in addition to this gyratory motion of the table, there is and upward and downward movement at a frequency of about 270 vibration per minutes ensuring that each square inch of the sieve is utilised. The whole gear mechanism runs in an oil bath, without test sieves or time switch. Suitable for operation from 220 Volts 50 cycles A.C. supply.

OPTIONAL EXTRA

DIGITAL Time switch 0-99 minutes for above, Rs.4000.00 MECHANICAL Time switch 0-60 minutes for aboveRs.1200.00

3 COMPRESSION TESTING M/C. - HAND OPERATED 1000 KN (100 TONNE) 4 PILLAR MODEL 36500.00 Compression Testing Machines conform to the requirements of IS : 516 and other international standards like BS and ASTM. Latest design with Hardchrome plate piston with new type of long life oil seal. Four Pillar Model is superior in design, reliability and accuracy in comparison to Channel model. NO WELDED PARTS. ALL JOINTS REINFORCED WITH HEAVY NUT/BOLT

Some of the salient features are :

* High Stability * Self-aligning platen assembly. * Gauges are calibrated in Kilo Newtons against certified Proving Rings. * Suitable for testing cubes of various sizes * Using special platens, bricks also can be tested.(Extra cost) ================================================================================ Cont....

Page No : 3 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------GENERAL SPECIFICATION

LOADING UNIT. The loading unit consists of a cross-head and base with solid pillars supports connecting the base and cross-head firmly.

The Hydraulic jack is fixed to the base. The platen of the machine are hardened ground and polished The upper platen is provided with self-aligning action. To facililate testing of various size specimens. spacer block provided.

PUMPING UNIT.

The hydraulic pumping unit is Manually Operated The load is measured on Bourdon tube type pressure gauge which is calibrated against certified proving rings. The pressure gauge is fitted maximum load pointer.

COMPRESSION TESTING M/C. - ELE. OPERATED

2000 KN (200 TONNE) ONE PRESSURE GAUGE 120000.00 CAPACITY 2000 KN Compression Testing Machine The machine embodies an hydraulic system designed to meet the requirements of Indian standards Specification 516-1959 for compression tests on concrete cubes upto 20 cm X 20 cm X 20 cm. and also concrete cylinders upto 30 cm height with One Gauge.

2000 KN (200 TONNE)-TWO PRESSURE GAUGE 127500.00 Same as above but with Two Gauge.

One graduated 0-1000 KN x 5KN div. One graduated 0-2000 KN x 10KN div.

2000KN(200 TONNE)-THREE PRESSURE GAUGE 135000.00 Same as above but with Three Gauges.

One graduated 0-2000 KN X 10 KN div. One graduated 0-1000 KN X 5 KN div. One graduated 0-500 KN X 2.5 KN div.

COMPRESSION TESTING MACHINES-DIGITAL 2000 KN 175000.00 The digital compression testing machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design expressive simplicity, both of construction and operation and makes the machine easy to use and maintain. The unit is compact, making it

useful for site applications. The digital machines are privided with a pace rate controller, to enable maintain a constant of loading.

The Complete unit comprises a Loading Unit which is of fully welded/two pillar model construction having a cross-head with a spherical seated platen. The lower ================================================================================ Cont....

Page No : 4 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------platen is attached to the top of the piston. The Loading capacitiy is of 2000 KN, Cubes upto 200 mm & Cylinders upto 150 mm Dia X 300 mm Height can be tested using the appropriate spacers.

Pumping Unit. The pump facilitates rapid approach of the platens for daylight closure and also provides comprehensive control over the application of load. A control valve privides fine control over the loading rate for accuracte pacing.

Maximum load is held and retained for approx. 15 min, unless cancelled, using the panel mounted reset switch. Pace rate set for running the test can be maintained manually.

Model Wtih digital Rendout and pace rate Controller

Type of Pumping : Electrical Loading Range : 2000 KN Least Count : 1 KN

Max. Clearance Between platen : 370 mm Max. Clearance Bet. side platen : 340 mm Platen Size. : 220 mm sq. Piston Stroke : 215.00 mm

Specimen Size : 100mm, 150mm and 200mm cube 150mm dia X 300mm high Cylinder.

4 BURETTES-(BOROSIL) CAT NO.2122 CLASS B GENERAL PURPOSE Burettes,Boroflo,fitted with Boroflo GP (General purpose)Screw thred Stopcocks with PTFE Keys,Accuracy as per class B.I.S.1997: 1967.

10 ml 0.05 0.05 Rs.360.00* 25 ml 0.10 0.10 Rs.345.00* 50 ml 0.10 0.10 Rs.380.00* 100 ml 0.20 0.20 Rs.550.00*

Calibration charges extra, if required

5 HOT AIR OVEN EIE - 101 WITH THERMOSTATIC CONTROL EIE-101 INNER S.S.CHAMBER Construction : Double Walled. Outer Chamber. : Mild steel, white powder coated Inner Chamber : Stainless Steel(SS 304) Insulation : About 75mm thick glasswool.Heaters

80/20 nichrome heating elements placed at bottom and sides for uniform heat distribution. Temp. Range : 50�C to 250�C ================================================================================ Cont....

Page No : 5 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------Temp. Control : By Sensitive Thermostat Temp. Indication: On Built - in "L" Shaped mercury thermometer. Standard supply : Perforated and adjustable stainless steel trays, Pilot pilot indicating lamps, ON/OFF switches, cord wire and power plug. Operation : 220/230V Ac.

Working Size Trays S.S.Chamber H x W x D Memmert

30 x 30 x 30 cm. 1 Rs. 8400.00 35 x 35 x 35 cm. 1 Rs. 8640.00 45 x 45 x 45 cm. 2 Rs.11040.00 60 x 45 x 45 cm. 3 Rs.14400.00 60 x 60 x 60 cm. 3 Rs.19200.00 90 x 60 x 60 cm. 3 Rs.25200.00

OPTIONAL ACCESSORIES

Recommended for higher control accuracy and uniformity of temp.

A. Forced air circulation by F.H.P. continuous duty Motor for uniform heat distribution. Rs. 3360.00

B. Dual display microprocessor based Digital Temp.Indicator cum controller with sensor in place of thermostat and thermometer. Rs. 4000.00

OR

C Auto tuning PID Temp. controller with soak timer in place iof item No.(B) Rs. 6000.00

6 GLASS THERMOMETER WITH TEST CERTIFICATE/TRACEABILITY "RESEARCH" laboratory thermometer, made from german glass with test certificate having traceablity to NPL for ISO requirements.

Total length : 300 mm Immersion : 76 mm

RANGE PRICE

-10/50� C. X 1/2� C. 330.00 -10/50� C. X 0.25� C. 390.00

-10/110� C. X 1� C. 330.00 0/250� C. X 1� C. 340.00 ================================================================================ Cont....

Page No : 6 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------MERCURY FILLED Dimple general purpose mercury-in-glass laboratory thermometers.

Total length : 300 mm Immersion : 76 mm

RANGE PRICE

-10/50� C. X 1/2� C. 120.00 -10/110� C. X 1� C. 86.00 -10/110� C. X 1/2� C. 120.00 0/200� C. X 1� C. 82.00

9 MEASURING TAPE STEEL TAPE 09) Size : 5 meter Rs.136.00 10) Size :30 meter Rs.456.00

Calibration charges extra, if required

11 MEASURING CYLINDER - GLASS

Cylinders,Graduated,Sinlge Metric Scale, with Pour Out with Hexagonal Base,accuracy as per IS:878:1975.

5 ml Rs.145.00* 10 ml Rs.165.00* 25 ml Rs.195.00* 50 ml Rs.215.00* 100 ml Rs.250.00* 250 ml Rs.455.00* 500 ml Rs.600.00* 1000 ml Rs.910.00* 2000 ml Rs.1750.00*

Calibration charges extra, if required

12 FINE SIEVES 20CM DIA BRASS FRAME 500.00 Test Sieve Brass 200mm dia (20 cm) Made out of rolled Brass, Spun Body frame without joint. Folded bottom having beading at top, tight fitting with each other. Mounted with stainless steel cloth. Finished as per : BSS/ASTM/ISS Microns (To Be Specified) Sizes : 1, 1.18 mm, 2.36 mm, 4.75 mm, 600 micron, 425 Micron, 300 Micron, 150 Micron. Price for each.

NEW AS PER MOST. SIZES : 2.8 mm, 5.6 mm, 180 Micron, 355 Micron, 710 Micron Price for each.

Lid-pan for above at extra cost of Rs.500.00

OR ================================================================================ Cont....

Page No : 7 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------"A" CLASS SIEVE WITH CALIBRATION CERTICATE @ Rs. 750.00 EXTRA PER EACH SIZE.

90 MICRON 600.00 75 MICRON 700.00

COARSE SIEVES 45 CM DIA G.I. FRAME, 500.00 Test sieves 45cm. dia, made of G.I.Sheet with joint Aperture in 100, 80, 63, 50, 40, 31.5, 25, 20, 16, 12.5, 10, 8, 6.3 and 4.75 mm

(New sizes as per MOST : 125,106,90,75,53,45,37.5, 26.5, 22.4, 19,13.2, 11.2, 9.5,6.7, 5.6, 2.8mm) Price per each size.

Lid-pan for above at extra cost of Rs.500.00

NOTE

Extra for Powder Coated sieve,per each sieve Rs.200.00

CALIBRATION CHARGES EXTRA,PER EACH SIEVE Rs.450.00

13 MEASURING CYLINDER - GLASS 448.00 Measuring Cylinders - Glass, 250ml capacity.

MEASURING CYLINDER - PLASTIC MEASURING CYLINDER CLASS "B"-PLASTIC 92.00 Capacity : 250ml.

14 AGGREGATE CRUSHING VALUE TEST APPARATUS. 15CM DIA 3750.00 Consist of a 15 cm dia meter open ended steel cylinder, with plunger and base plate complete with a tamping rod with circular cross section 16mm dia meter and 45 to 60 cm long, rounded at one end for 3/8 to 3/40 aggregate. Related Standard: IS:2386 (Part-IV).

Cylindrical metal measure 11.5cms diameter and 18cms height fitted with handle. Rs.650.00

15 SLUMP TEST APPARATUS 1450.00 Consists of a slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape two clamps slide over the foot grips of a standard slump cone and hold it securely while fitting and rodding. A ================================================================================ Cont....

Page No : 8 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 mm dia with 0-30 cms scale graduation. RELEVANT STANDARD : IS : 1199,IS 7320.

16 ELECTRONIC BALANCE 10500.00 Capacity : 500 gm Accuracy : 10 mg Platform Size : Round 110mm

17 AGGREGATE IMPACT TESTER 6200.00 For determining the aggregate impact value of coarse aggregate. Consists of base weighing between 20-30 kg with a lower surface of not less than 30 cms and support columns to from a rigid frame work around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0 mm. The hammer is provided with a locking arrangement. A metal tup(hammer) weighing 13.5 to 14.0 kg, the lower end of in cylinderical shape, 100 mm in diameter and 5 cm long with a 2 mm chamfer at the lower edge and case hardened. Complete with a cylindrical cup, 102 mm dia X

50 mm depth, one measure 75 mm dia X 50 mm deep and a tamping rod of circular cross section 10 mm in diameter and 230 mm long, rounded at one end. AS PER IS : 2386 (Part - IV).

18 SPATULA 85.00 It shall be made of stainless steel with wooden handle. Size of blade - 20 cm long. Width of blade _ 2.5 cm appropriate thickness.

19 PROCTOR COMPACTION MOULD (1000CC) 1115.00 It will be made of gun metal or mild steel with essential following dimensions. 100 mm dia. mould having a capacity of 1000 c.c with an internal diameter of 100 + 0.1 mm and an internal effective height of 127.3 cm_+ 0.1 mm. The mould will be fitted with a detachable gunmetal or mild steel base plate and removable extension collar approximately 60 mm high. The internal surface of the mould will be smooth. It will conform to the requirements given in the IS 2720 (Part VII).

COMPACTION RAMMER 2.6KG LIGHT RAMMER 2.6Kg X 310MM FALL 750.00 A metal chrome plated rammer having 50 mm dia. Circular and weighing 2.6 kg. The rammer will be equipped with a suitable arrangement for controlling the drop to the specified height of 310 mm. It will conform to the ================================================================================

Cont....

Page No : 9 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------requirement given in the IS 2720 (Part VII), IS 9198.With our own test certificate.

PROCTOR COMPACTION MOULD (2250 CC) 1600.00 It will be made of Mild steel having capacity of 2250 c.c with an internal diameter of 150 + 0.1 mm and an internal effective height of 127.3 cm + 0.1 mm.The mould will be fitted with a detachable base plate and removable extension collar approximately 60 mm high. The internal surface of the mould will be smooth. It will conform to the requirements given in the IS 2720 (Part VII).Complete with our own test certificate.

COMPACTION RAMMER 4.89KG HEAVY RAMMER 4.89Kg X 450MM FALL 1075.00 A metal chrome plated rammer having 50 mm dia. Circular and weighing 4.89kg. The rammer will be equipped with a suitable arrangement for controlling the drop to the specified height of 450 mm. It will conform to the requirement given in the IS 2720 (Part VII), IS 9198.With our own test certificate.

20 RAPID MOISTURE METER AS PER IS:2720-II 4500.00 The unit consists of a pressure gauge with clamp for sealing cap, rubber sealing basket, pressure gauge calibrated in percentage moisture contents on the wet weight basis upto 25% . Which is equal to 33 % moisture content on the dry weight basis.

OR

Same as above but Deluxe Model with 150mm dia and Horizontal pace readout moisture gauge. Rs. 5150.00

21 SAMPLING/MIXING TRAYS. Made of Galvanised Iron, with handles.

21) Size : 600 x 450 x 50 mm Rs.650.00 22) Size : 450 x 300 x 40 mm Rs.450.00 23) Size : 350 x 250 x 40 mm Rs.350.00

24 CUBE MOULD(NON ISI) 150 X 150 X 150mm - 8 TO 9 Kg Approx. 850.00

150 X 150 X 150mm - 12 To 13 KG APPROX 1450.00 Good quality, Dimensions as good as ISI marked.

CUBE MOULD(ISI MARKED) 150 X 150 X 150 MM 2150.00 ================================================================================ Cont....

Page No : 10 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------25 CUBE MOULD(NON ISI) 50 X 50 X 50 mm 450.00

26 SPECIFIC GRAVITY BOTTLE Capacity : 50ml 350.00

27 CONCRETE TEST HAMMER EIE-022 5500.00 Consists of a barrell in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent (according to the strength of the surface, which is indicated by a rider on a calibrated scale(r) A lock button fixed on the body of the hammer lock the rider in place and the rider can be recared to zero Position by using the same button The equivalent compressive strength can be computed from the chart supplied.It is suitable for specimen of compressive strengths 100-700Kg/cm.The

instrument, complete with a grinding stone for polishing the test surface, is supplied in carring case.

(No Guarantee for results)

CONCRETE TEST HAMMER - IMPORTED 58-C0181/N CONTROL U.K.MAKE 40000.00 Concrete test hammer type "N" classic model, aluminium case. It is used for the non destructive testing of the surface of hardened concrete in order to evaluate the strength in various parts of a structure. During operation plunger of the hammer is passed against the surface of the concrete. This action compresses a spring which automatically releases a percussion weight striking against the plunger, and onto the surface of the concrete. This impact causes a rebound effect which is proportional to the strength of concrete. A pointer on the scale indicates the maximum rebound point of the percussion weight. This number is referred to the calibration curve chart on the hammer and shows the compressive strength in relation to the impact value. The concrete hammer is supplied complete with plastic carrying case, grinding stone and instruction manual.

058-C0181/G DIGITAL 210000.00 This new and advanced model of digital concrete hammer microprocessor operated consists of the standard unit ================================================================================

Cont....

Page No : 11 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------similar to the model 58-C181/N but equipped with electronic transducer which converts the rebound of the hammer into and electric signal and displays it in the selected stress unit.

The firmware has the following capability:

* Introduction of a numerical code * Setting of test parameters and factors (age, shape-cube or cylinder, user defined correction factors) * Selection of the testing angle * Selection of the unit in use (kgf/cm2, Mpa or p.s.i.)

The digital hammer, which is battery operated, can be easily connected to a PC or Serial printer via the RS 232 C port. A large permanent memory can store up to 5000 results. Supplied complete with battery charger and serial cable.

* Easy to Use * RS 232 C output to PC/printer * Test results elaboration

Concrete Hammer Impact Energy : 2.207 Joule Dimensions : 190 x 100 x 350 mm (with case) Weight Approx. : net 2 Kg (with case)

CALIBRATION ANVIL 60000.00 CALIBRATION ANVIL FOR TEST HAMMER 058-C0181/N It is used for calibration of concrete test hammers. It is made of special alloy sheet. Dimension : 150mm dia x 230 mm height. Weight : 16 kg approx.

28 VICAT NEEDLE APPARATUS WITH DASHPOT 1900.00 Consist of a metallic frame bearing a movable rod with cap at one end and a vicat mould 70 mm in dia at the base, 50 mm at the top and 40 mm high & with a glass base plate consistency plunger, initial and final setting needles in a nice jewellary case. with dashpot to facilitate the gentle lowering of the needle. RELEVANT STANDARD : IS : 5513,

29 LE-CHATLIER MOULD. IS: 5514 1900.00 It consists of a small split cylinder forming a mould on either side of the split cylinder, two parallel indicating arms with pointed ends are attached.

Supplied complete with two glass plates and lead weight. Set of Six. ================================================================================ Cont....

Page No : 12 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------30 WEIGHTS C.I.WEIGHTS - COMMERCIAL Capacity : 500 gm. Rs. 50.00 200 gm. Rs. 32.00 100 gm. Rs. 22.00 50 gm. Rs. 19.00 2 kg. to 50 gm. Rs.240.00 (Set) Rs.400.00(Heavy)

STANDARD WEIGHTS BRASS (F2) With Calibration Certificate from R R SL Govt. of India Tolerances as per OIML - R - III Recomandation. Specification as per Standard of Weights and measures (General) Rules 1987.

DENOMINATION OF MASS CLASS F2 PRICE (TOLERANCE IN MG)

500 g 7.5 Rs. 1875.00 200 g 3.0 Rs. 1560.00

100 g 1.5 Rs. 1125.00 50 g 1.0 Rs. 1125.00 20 g 0.8 Rs. 1125.00 10 g 0.6 Rs. 1060.00

ANALYTICAL WEIGHT BOX WITH CALIBRATION CERTIFICATE 7000.00 Very superior quality, having Stainless steel weights with rider and fraction weights set in vevet lined polished wooden case. 500mg,200mg, 100mg, 50mg, 20mg, 10mg,5mg, 2mg,1mg, 1gm, 2gm, 5gm, 10gm, 20gm (2 Nos),50gm, 100gm and 200 gm.'A' GRADE WITH CALIBRATION CERTIFICATE WITH TRACEABILITY TO NATIONAL STANDARDS.

32 VERNIER CALIPER - ORDINARY TYPE 150MM CHINA MAKE. 950.00 Lease Count : 0.02 mm

Calibration certificate at extra cost of Rs.450.00

200MM CHINA MAKE. 1250.00 Lease Count : 0.02 mm

Calibration certificate at extra cost of Rs.450.00

300MM CHINA MAKE. 1650.00 Lease Count : 0.02 mm

Calibration certificate at extra cost of Rs.450.00

33 TWO PAN BALANCE DELUXE QUALITY (10 KG.) 3250.00 Capacity : 10 Kg. Complete with Aluminium Die casted body stainless steel pans needle indicator type, complete with set of weights 5 kg,2kg(2 Nos) 1 kg, 500 gm, 200 gm (2 Nos), 100 gm. ================================================================================ Cont....

Page No : 13 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------DELUXE QUALITY (5 KG) 2850.00 Capacity : 5 Kg. Complete with Aluminium Die casted body stainless steel pans needle indicator type, complete with set of weights 2kg(2 Nos) 1 kg,500 gm.200 gm,(2 Nos),100 gm.

1 ELCOMETER(COATING THICKNESS GAUGE)DIGITAL M2S DIGITAL - MAGNETIC BASE MODEL 14500.00 FOR NON-MAGNETIC COATING ON MAGNETIC BASE. WITH SIMULTANEOUS STATISTICS DISPLAY.

COATMEASURE-M2S It is DIGITAL electronic gauge measuring thickness of non-magnetic coating on magnetic base. Iron (MS) is magnetic & most of remaining materials are non-magnetic. Calibration with testfoils is easy by zero & Cal Knobs. Instrument has spring loaded probe. Probe has V groove for cylindrical parts.A testpiece is provided to check if instrument works satisfactory. It has 'Auto-off' to save battery.

TECHNICAL DATA

* Range : Microns 0-2000

* Accuracy : 2% or 1 Micron. * Min. area : 12 mm Dia * Min. base thickness : 0.3 mm * Supply : Dry Battery 9 V * Bat. Check:Replace battery when LOBAT glows. * Temp. : 0-50 deg C * Dimensions: 165 mm X 125 mm X 50 * Weight : 950 grams

Calibration certificate at extra cost of Rs.750.00

M12S 22500.00 FOR NON-MAGNETIC COATING ON MAGNETIC BASE.

COATMEASURE-M It is DIGITAL electronic gauge measuring thickness of non-magnetic coating on magnetic base. Iron (MS) is magnetic & most of remaining materials are non-magnetic. Calibration with testfoils is easy by zero & Cal Knobs. Instrument has spring loaded probe. Probe has V groove for cylindrical parts.A testpiece is provided to check if instrument works satisfactory. It has 'Auto-off' to save battery.

TECHNICAL DATA

* Range : 0-12 MM

MC2S MAGNETIC/CONDUCTIVE BASE 24500.00 Coatmesure - M&C For both Ferrous & Non-Ferrous Bases.

Microns 1250. ================================================================================ Cont....

Page No : 14 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------2 ULTRASONIC THICKNESS GAUGE TT-100 38500.00 The TT100 is a hand held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non metallic materials e.g. aluminium, titanium, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces.

With uses in many areas of industry TT100 can perform precise measurements on various types of raw materials, component parts, and assembled machinery. It can also be used to monitor all types of pipes and pressure vessels for loss of thickness due to corrosion or erosion.

TT 100 is extremely easy to use. After a simple calibration to a known thickness or sound velocity, the gauge will give accurate readings in millimeters. Sound velocities for 5 different materials can be preset and 10 thickness readings can be stored in the memory. Display Type : 4-digit LCD Minimum Display Unit : 0.1mm

Measuring Range : 1.0mm - 225.0mm (in steel with standard probe) (other maximum values depending on material) Lower Limit Steel Pipes : Minimum Dia 20mm x 3mm Display Accuracy : +/- 0.1mm Sound Velocity Range : 1000-9999m/s Operating Temperature: -5 to 40 deg.C Frequency : 5 MHz Update Rate : 4 MHz Power Supply : 1.5V AA Alkaline Cells (2 pcs) Battery Life : 250 hours with one battery set Dimensions : 126mm x 68mm x 23mm

3 ULTRASONIC FLAW DETECTOR EINSTEIN-II 210000.00 Digital Ultrasonic Flaw Detector Elnstein-II, an advanced model, Auto DAC plotting, Digital thickness/distance measurements, trigonometric measurements of depth and surface distance in weid inspection, Memory of 200 A-Scan images and 50 set-up data, RS 232 for PC connnectivity with transfer software.

Standard Accessories:

a) ATB-1, 14.4 Volts/4 AH Li-Ion Rechargeable battery Pack (Qty.1 No) b) ATC-1, Battery charger cum mains power pack with charge status indicator (Qty.1 No.)

================================================================================ Cont....

Page No : 15 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------c) ETK : Special Leather Protective case with shoulder sling and waist-strap.(Qty. 1 No.) d) EL371,Aluminium Foam fitted carrying case with look for storage and transportation of complete kit (Qty.1 No.) e) Einsoft-1, Transfer software on CD-ROM f) Eincord-1, Data cord to interface Einstein-II with PC g) Eincord-2, Data cord to interface Einstein-II with printer. h) EIM1 Illustrated instruction (Operation) Manual in English (Qty. 1 No.) i) M2SN, Normal Probe, 24mm dia 2 MHz, with BNC connector. j) MBW 45 N4, Miniature angle probe 9 x 8mm 45 deg.c, 4 MHz with Mini Lemo Connector k) MMEB 4H,Miniature Dual (T/R) Crystal Probe, 10mm, 4 MHz. with Mini Lemo connector. l) PKBB2, Probe Cable BNC to BNC, 2 meters (1 No.) m) MPKBL2, Probe Cable BNC to Mini Lemo, 2 Meters - 2 n) V1, IIW type, including wooden box with handle

o) Test & Calibration Certificate.

4 VERNIER CALIPER - DIGITAL 150MM CHINA MAKE. 2250.00 Least Count : 0.01 mm

Calibration certificate at extra cost of Rs.450.00

5 VERNIER CALIPER - ORDINARY TYPE 600MM X 0.02MM. CHINA MAKE. 2950.00 Four way with fine adjustment.

Calibration certificate at extra cost of Rs.450.00

6 MICROMETER Outside Micrometer, 0-25mm China Make Rs. 375.00 Outside Micrometer, 0-25mm Mitutoyo Make Rs. 1560.00

Outside Micrometer, 0-100mm China Make Rs. 3125.00 Outside Micrometer, 0-100mm Mitutoyo Make Rs. 12500.00

Outside Micrometer,0-150mm.China Make Rs. 5000.00 Outside Micrometer,0-150mm.Mitutoyo makeRs. 15000.00

Outside Micrometer,150-300mm.China Make Rs. 6500.00 Outside Micrometer,150-300mm.Mitutoyo makeRs.22185.00

MICROMETER Inside Micrometer, 5-30mm, China Make Rs. 2500.00

25-50MM, China Make Rs. 3125.00

Inside Micrometer, 5-30mm, Mituotyo Make. Rs. 9375.00 25-30mm, Mitutoyo Make Rs.11250.00 ================================================================================ Cont....

Page No : 16 ================================================================================ Sr. Description Price --------------------------------------------------------------------------------

10 PORTABLE HARDNESS TESTER TH 130 78000.00 TH130 is an advanced integrated hardness tester disitnguished by its very compact size, high accuracy, wide measuring range and simplicity of operation. It is suitable for testing the hardness of all metals, and widely applied in many areas of industry.

TH 130 hardness tester combines the universal impact device D and a data processor in a single unit. It automatically computes all vickers, Brinell, Rockwell, or Shore hardness values. The impact direction can be set so that accurate values can be achieved at any angle, even up-side down. Statistical mean value is automatically provided.

The measuring method of TH 130 is defined as " the quotient of the impact body's rebound velocity over its impact velocity" When the tester is connected to its associated printer it can perform real time printing. It can also be equipped with optional accessories, such as support rings, to meet the requirements of

specialized applications.

Typical Applications :

* In situ testing of large and/or heavy components, items installed as parts of a machine.

* During manufacture, especially of mass prduced components. * In the stores for material idntification. * In locations with difficult access, or in confined spaces. * For quality control in general, fast and very accurate.

TECHNICAL DATA :

* Size : 150 x 22 x 53 mm * Impact device : D * Impact energy : 11 Nmm * Test tip : Tungsten Carbide * Measuring accuracy : Mean Uncertainty � 0.8% (corresponding to � 1 HRC at HRC =58) * Max. hardness of sample : 980 HV * Weight : 130 g * Operating time: 8 hours continuous use/rechargeable

================================================================================ Cont....

Page No : 17 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------* Impact direction : any angle * Operating temperature : 0 to 50' deg C. * Min.weight of sample : 5 Kg (less than 5 Kg to 0.1 Kg. coupled on solid support) * Min thickness of sample : 5 mm (coupled : 3 mm) * Min thickness of layers : 0.8 mm * Min radius of curved surface: 30 mm ( wiht support rings : 11 mm)

Coupling paste is available for testing thin or small parts weighing less than 2 Kg.

11 POLDI HARDNESS TESTER PHM 4500.00 POLDI type impact hardness tester for metal (ferrous as well as non-ferrous) with 10 mm Brinell ball indentor and with Magnifiscope. Supplied with instruction manual

PHM-II 7750.00 New (Patented) "POLDI" type impact hardness tester for thick metals as well as thin matallic sheets upto 1 mm thickness (ferrous & non-ferrous) with normal 10 mm ball indentor & extra double-cone indentor and 4-language instruction manual.

12 QUOTATION FOLLOWS.

13 RADIOGRAPHIC FILM VIEWER LH-P 6000.00 Luminux High intensity Illuminator are available in several models for viewing radiographic films. All film viewer are capable of viewing films of minimum density 4.0. Few models are designed to view very dark films of density upto 4.5.

Light source is either halogen lamps and or compact high intensity fluorescent light. Film viewers are having common features such as control for varying light intensity to suit density of radiograph, Cooling fan, Heat absorbing glass. Shutters and / or IRIS diaphragm to control viewing screen area to suit film size or for viewing localized defects. A built in light glare free viewing and noting the observation in dark and a foot switch enables hand free switching of high intensity light. ================================================================================

Cont....

Page No : 18 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------MODEL : LH-P

This model is portable and can be carried in a briefcase viewing area is 50 x 200mm and fitted with cold light and can view films having density upto 3.8. The light intensity can be varied in steps depending on the density of the film. Most Suitable for the inspectors. Surveyors.

LH-SP 14300.00 A specially very high intensity illuminator to view dark radiographs. Most suitable for viewing radiographs of objects of varying thickness resulting in wide range of density verification. Provided with two cooling fane and special halogen lamps. Has wide range of applications. Very useful for both laboratory and field work. Density Range 4.50.

LH-12 7800.00 High Intensity illuminator with viewing screwn fitted with IRIS diaphragm (aperture) of maximum diameter 150mm reducible to 5mm to help viewing a particular area of radiograph. Most suitable for viewing localised

defects. Can view radiographs of density upto 4.

LH-125 14300.00 Dual screen model specially made for toundries to view large size casting radiographs of sizes upto 35 x 43 cms (14" x 17"). Also provided with Iris diaphragm (aperture of diameter 150mm / 5mm to view localised defects).

LH-225 14300.00 Viewing screen of area 10 x 40 cms with shutters and marks to view & 5cms and also with a hot spot fitted with Iris Diaphragm (aparture of 75mm max & 5mm min. Diameter) for viewing localised defects.

14 MICROMETER Pitch Micrometer, 0-125mm, China Make @ Rs. 3125.00 Pitch Micrometer, 0-125mm, Mitutoyo Make@ Rs.30000.00

15 DUROMETER DIGITAL SHR A DI Y2K 28000.00 Digital Shore A Durometer with constant contact pressure for rubber and soft plastics as per DIN 53505 and ASTM D 2240. Reading 1 to 100. Least Count 0.5

DIGITAL SHR D DI Y2K 42000.00 Shore D hardness tester for hard rubber,ebonite, plastics, graphites and bakelite. with precision gear mechanism as per the latest german standard DIN 53505

and latest American standard ASTM D 2240. Reading : 1 -100 Shore D. Least count : 0.5 ================================================================================ Cont....

Page No : 19 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------SHAR A GOLD 7200.00 Shore A Circular type hardness tester for soft rubber with precision gear mechanism as per the latest german standard DIN 53505 and latest American standard ASTM D 2240. Reading : 1 -100 Shore A. Least count : 1

SHR D GOLD 10500.00 Shore D circular type hardness tester for hard rubber,ebonite, plastics, graphites and bakelite. with precision gear mechanism as per the latest german standard DIN 53505 and latest American standard ASTM D 2240. Reading : 1 -100 Shore D. Least count : 1

SPECIAL STAND WITH LIFTING LEVER. 6500.00 Special stand with lifting lever. For model (b) Most suitable for quick check of large quantity of similar profuction. Take care of firm contact with surface of test specimen & eliminates human error by automatically balancing tester.

16 SHOP MICROSCOPE SWING

R7520 SWING-OUT INSPECTION LOUPE 10X 2700.00 R235 SWING-OUT INSPECTION LOUPE 10X 4340.00 R230 SWING-OUT INSPECTION LOUPE 18X 4300.00 R237 SWING-OUT INSPECTION LOUPE 20X 4980.00 R232 SWING-OUT INSPECTION LOUPE 10X,15X 1980.00 R231 SWING-OUT INSPECTION LOUPE 10X 1820.00

RBM-101 5400.00 Bench Magnifier (Magnascope)

RBM-104 7200.00 Magnifier (Flexible Arm) Deluxe Model.

Swing Out Auxillary Lens for Magnascopes, Extra cost of Rs.1500.00

17 U.V.LAMP 254 MM 2750.00

18 DIAL GAUGES 2250.00 The dial gauge will be of BAKER/STANDARD make with following Specifications

Face diameter 50 mm Play/travel 25 mm Sensitivity 0.01 mm

The dial will be marked 0 - 100 divisions and arrangement for adjusting zero with locking system will

be provided. The dial gauge back will be provided for ================================================================================ Cont....

Page No : 20 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------holding horizontally as well as verically with the clamp.

We also have dial gauge with 0.002 X 12mm or 0.01 X 50mm range or as per your requirement and application

19 PH METERS (TABLE MODELS) (M.T.C.) PM-100 - DIGITAL PH METER 4500.00 Digital pH METER with manual temp. compensation and combination pH electrode. 3-1/2 LED display. Range 0-14 pH, Resolution 0.01 pH, Accuracy 0.01 pH.

NOTE :

Variety of pH meters available for different requirements and applications. In case the above model does not suit your application or budget, please contact us for more options.

PH METER(TABLE)(MICROPOROCESSOR BASED) PH TUTOR 11500.00 FETURES :

-> SIMPLE TO USE -> UP TO 3 POINT CALIBRATION -> AUTOMATIC BUFFER RECOGNITION -> +/- 0.01 PH ACCURACY

METER SPECIFICATIONS :

PH RANGE : 0.00 TO 14.00 PH. RESOLUTION : 0.01 PH ACCURACY : +/- 0.01 PH

TEMP.RANGE : 0.0 TO 100�C. RESOLUTION : 0.1�C. ACCURACY : +/- 0.3�C. TEMP.COMP. : AUTOMATIC/MANUAL (0 TO 100�C.) DEFAULT AT 25�C. PH BUFFER OPTIONS : US STANDARD (PH 4.01,6.86,9.18) NO.OF CALIBRATION POINTS : UP TO 3 POINTS STABILITY INDICATOR : YES(READY) PH SLOPE & OFFSET DISPLAY : YES SELF-DIAGNOSTIC MESSAGE : YES USER RESET : YES DISPLAY : CUSTOM DUAL LINE LCD INPUTS : BNC, PHONO POWER REQUIREMENTS : 9V DC ADAPTER,120 VAC OR 220 VAC,500 mA. DIMENSION /WEIGHT : METER : 18�23�6cm.:570g. BOXED : 40�26�9cm.:1200g.

TEMPERATURE PROBE TO BE ORDERED SEPARATELY. ================================================================================ Cont....

Page No : 21 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------PH METERS (PEN TYPE) PORTABLE PEN TYPE. Range 0-14 pH, Resolution 0.1 pH, Accuracy 0.2 pH

Ordinary Quality. (Non reparable-small display) Rs.1800.00 Medium Quality (Non reparable - Large display) Rs.2500.00 Delux Quality. (Microprocessor based, with calibration facility and reparable) Rs.4200.00

20 TACHOMETER - NON CONTACT TYPE DIGITAL EAPL-DT 2001B 4000.00 SALIENT FEATURES.

* Microcontroller based design * RPM measurement from 1 RPM upto 99,999 RPM * Non-Contact Sensing through reflected light beam * LCD Display * Input sensing indication through LED * Memory facility to retain measured value * 6V Battery operated

* Portable Lightweight Strong and Elegant ABS Enclosure. TECHNICAL DATA :

Accuracy : � 1 RPM upto 5000 RPM and � 0.05% over 5000 RPM Resolution : 0.1 RPM upto 5999 RPM and 1 RPM over 6000 RPM Sensing Distance : 2" to 6" (Max 12" Depending on Ambient Light) Display : 0.3"5 Digit LCD Display. Range upto : 99999 RPM

21 TDS METER (PEN TYPE) PORTABLE PEN TYPE Range 10-1990 PPM or 100-10000 PPM(0.1 - 10 PPT)

Ordinary Quality. (Non reparable-small display) Rs.1800.00 Medium Quality (Non reparable - Large display) Rs.2500.00 Delux Quality. (Microprocessor based, with calibration facility and reparable) Rs.4200.00

1 DIGITAL MULTIMETERS/ANALOG MULTIMETERS 31/2 digit,handheld battery operated, 0 to+/-200mV/ 2V/20V/200V/1000V DC,200/750 V AC, 0 to+/- 200 uA/

2mA/200mA/2A/10ADC,0 to 200/2K/20K/200K/2M/20M ohm, having diode and transistor hFE checking facility. @ Rs.1200.00 ================================================================================ Cont....

Page No : 22 ================================================================================ Sr. Description Price --------------------------------------------------------------------------------

3.5 digit,hand held,battery operated 0 to 200mV /2V /20V/200V/1000V DC,0 to 200mV/2V/20V/200V/ 750V AC, 0 to 200mA/2mA/20mA/200mA/2A/10A DC,0 to 2mA/20 mA/200 mA/10A AC,0 to 200/2K/20K/200K /2M/20M Ohm, having diode and continuity checks. Size 91mm(W) x 40mm(H) x 170mm(D). 330gms. @ Rs.2200.00

4.5 digit,hand held,battery operated, 0 to 200mV /2V /20V/200V/1000V DC,0 to 2/20/200/700V AC,0 to 200uA /2mA/20mA/200mA/10A DC, 0 to 2mA/20mA/ 200mA/10A AC, 0 to 200/2K/20K/200K/2M/20M Ohm, 0 to 2000pF/ 20n F/200nF/2uF/20uF, 0 to 20 KHz, having diode and hFE checks. Size 85mm(W) x 35mm(H) x 165mm(D). 600gms. @ Rs.3200.00

2 INSULATION TESTERS(MEGGAR) Insulation Testers (Precision Grade) (Digital)

a) Insulation Tester, Digital 500 volts, 0 to 2000 mega ohms, resolution of 1

mega ohm throughout the range, Size 115mm x 55mm x 175mm 500 gms. Rs. 4000.00

b) Insulation Tester, 1000 volts, 0 to 2000 mega ohms, resolution of 1 mega ohm throughout the range Size 115mm x 55mm x 175mm, 500 gms. Rs. 4000.00

c) Insulation Tester, dual voltage, 500/1000 volts, 0 to 2000 mega ohms resolution of 1 mega ohm throughout the range, Size 115mm x 55mm x 175mm 500 gms. Rs. 5000.00

d) Insulation Tester, 4 voltages, 100/250/500/1000 volts, 0 to 2000 mega ohms, resolution of 1 mega ohm throughout the range, Size. 115mm x 55mm x 175mm, 500 gms. Rs. 6000.00

e) Insulation Tester, 4 voltages, 500/1000/2000/2500 volts, 0 to 20,000 mega ohms, resolution of 10 mega ohm throughout the range Size.115mm x 55mm x 175mm.500gm. Rs. 6000.00 ================================================================================ Cont....

Page No : 23 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------3 TONG TESTER (CLAMP METERS) 5500.00 3.3/4 digit, AC and DC current, 0 to 400/1000 amps DC and AC, 0 to � 400mV /4V /40V /400V /1000V DC auto-ranging.0 to 400mV /4V /40V /400V /700V AC auto-ranging.0 to 400 Ohms/4K ohms /40K ohms /400K ohms /4M ohms /4M ohms /40M ohms autoranging.0 to 40nF /400nF /4uF /40uF /100uF autoranging,0 to 40Hz /400Hz /4KHz /40KHz /400KHz /4MHz /20MHz autoranging.Provided with continuity buzzer,diode test, data hold, auto power off facilities, maximum cable diameter 52 mm. Size 45mm(H) x 88mm(W) x 248mm(L), 360gms.

AGRONIC-62A 2100.00 3� digit, 0 to 200/1000 amps AC, 0 to 1000 V DC, 0 to 750 V AC, 0 to 200 ohms/20K Ohms. Provided with continuity buzzer and data hold facilities, maximum cable diameter 55 mm. Size 45mm(H) x 100mm(W) x 240mm(L), 310gms.

5 HIGH VOLTAGE BREAKDOWN(FLASH)TESTERS AGRONIC - 214 7200.00 With KV and mA meters,automatic tripping facility, safety probe, audio alarm. 0 to 5 KV,3 to 30 milli amps

tripping level setting.

AGRONIC - 214 A 12000.00 With KV and mA meters,automatic tripping facility, safety probe,audio alarm.0 to 5 KV, 3 to 100 milli amps, tripping level setting.

6 EARTH RESISTANCE TESTER 4500.00 Digital, dual range 0.01 to 5.00 and 1 to 500 ohms, supplied with rechargeable Ni-Cd batteries and charging adaptor.

Kit for earth resistance testers, consists of 4 M.S. spikes, 4 spools of wires, 1 hammer, 1 screw driver and carrying bag @ Rs. 950.00

7 HYGROMETER HUGER THERMO HYDROMETER 1250.00 Hygrometer 85/100 mm dia. Range 0 - 100%

CALIBRATION CHARGES EXTRA

8 STOP WATCH DIGITAL TYPE. 750.00 RACER MAKE. Accuracy : 1/100 second

MECHANICAL TYPE 1450.00 With start,stop and fly back action. Accuracy : 1/10 second or 1/5 second.

================================================================================ Cont....

Page No : 24 = =============================================================================== Sr. Description Price -------------------------------------------------------------------------------9 MULTIMETER 750.00 Multimeter, Analog, Portable 0 to 0.1/0.5/2.5/10/50/250/1000V DC, 0 to 10/50 250/1000V AC, 0 to 50u A/2.5 mA/25 mA 250mA DC, 0 to 2K/20K/200K/2M/20M ohms, -10 to +50 dB for AC V (0DB=1mW at 600 ohms) ICEO (Leakage current) Test from 0 to 150 uA/15mA/150mA,

10 DIMMERSTATS (VARIACS) Single Phase, Output 0 to 270 volts AC for input of 240 volts AC. Portable (Closed) type Desktop Models.

CURRENT MODEL NO. WEIGHT RATE(RS.) RATING

1 amp V1P1 2.3Kg. @ Rs.1500.00 2 amp V2P1 4.2Kg. @ Rs.1600.00 3 amp V3P1 4.6Kg. @ Rs.1900.00 4 amp V4P1 6.9Kg. @ Rs.2700.00 6 amp V6P1 7.7Kg. @ Rs.2900.00 8 amp V8P1 9Kg. @ Rs.3350.00

10amp V10P1 10Kg. @ Rs.3550.00 15amp V15P1 16Kg. @ Rs.5150.00 20amp V20P1 18Kg. @ Rs.5500.00

11 TONG TESTER (CLAMP METERS) 2100.00 3� digit, 0 to 200/1000 amps AC, 0 to 1000 V DC, 0 to 750 V AC, 0 to 200 ohms/20K Ohms. Provided with continuity buzzer and data hold facilities, maximum cable diameter 55 mm. Size 45mm(H) x 100mm(W) x 240mm(L), 310gms.

12 POWER FACTOR METERS 2100.00 Power Factor Meter, --0.3--1--+0.3 pF, 150 to 270 volts AC, 50/60 Herz, 0 to 10 amps, 4 digit LED display of 12.5mm height, Cabinet size of 96mm x 96mm x 65mm with panel cutout size of 92mm x 92mm, 600 gms.

13 NOT QUOTED

14 MICROMETER Pitch Micrometer, 0-125mm, China Make @ Rs. 3125.00 Pitch Micrometer, 0-125mm, Mitutoyo Make@ Rs.30000.00

15 QUOTATION FOLLOWS. Please let us know your application. ================================================================================ Cont....

Page No : 25 ================================================================================ Sr. Description Price -------------------------------------------------------------------------------16 INFRARED THERMOMETER MT-4 GUNSHAPE WITH LASER SIGHTING 5400.00 If you're looking for a basic noncontact thermometer, Mini temp is priced to fit any toolbox and is small enough to fit in your pocket. And it's easy to use-just point, shoot, and read the temperature on the backlit display. Choose between MiniTemp MT2, without laser sighting, or MiniTemp MT4 with laser sighting. MiniTemp is so handy you'll want to use it at work, at home, anywhere. Accessory pack including carrying pouch and wrist strap is available.

Temp Range : -18 to 360�C(0 to 500�F)

Accracy : �2% of reading or �2�C(�3�F) Whichever is greater

Repeatabilty : �2% of reading or �2�C(�3�F) Whichever is greater

Response (95%) : 500 mSec

Emissivity : Preset 0.95

Laser(Class II) : Yes

Power : 9V Alkaline/Nicad Battery

D:S(nominal @90%): 6:1

17 NOT QUOTED -------------------------------------------------------------------------------TERMS & CONDITIONS Prices : Ex-godown, Ahmedabad. Packing, Forwarding, Freight and all transit charges Extra. Sales Tax : VAT WILL BE EXTRA @ 5%. Validity : 30 Days from The Date Of Quotation. Delivery : Within 6-8 Weeks after receipt of order. Warranty : 12 Months Against Any Mfg. Defects Payment : 30% Advance, Balance Against Proforma Invoice.

Thanking you and assuring you of our best services and attention.

Yours faithfully, for, EIE INSTRUMENTS PVT. LTD.

AUTHORISED SIGNETORY ================================================================================