Egp Details

• EGP Deliverables Details to be mentioned in the presentation are Highlighted slide by slide

Oct 2009

Volkswagen India Pvt. Ltd.

1

Slide no. 1

Commodity / Part under Consideration; Insert an Isometric View of the Part

Oct 2009

Volkswagen India Pvt. Ltd.

2

Slide no. 2 • Provide the Tool Details like – Type of tool – Machine Tonnage – Shrinkage considered – Overall size of the tool – Number of cavity – Material of the tool – Material of the part – CAD data considered along with date of CAD received – Runner details

Oct 2009

Volkswagen India Pvt. Ltd.

3

Slide no. 3

Core side portion & Cavity side portion of the product (show by two different colors)

Oct 2009

Volkswagen India Pvt. Ltd.

4

Slide no. 4

Parting line (dashed one) clearly visible on the part (add more closer views for complex Geometry or at critical areas) Parting line flash should be minimal within 20 microns

Oct 2009

Volkswagen India Pvt. Ltd.

5

Slide no. 5

Show the Gate Point Position & Type of Gate Considered; mention advantage of going with this design or type

Oct 2009

Volkswagen India Pvt. Ltd.

6

Slide no. 6

Show the Sliders, Lifters, Inserts etc. that are required in the tool; Clearly highlight the area getting clear under these.

Oct 2009

Volkswagen India Pvt. Ltd.

7

Slide no. 7

Show the Ejection strategy of the Part (Ejector pin marks impression should be Shown at the ‘B’ surface / core side of the part); Justify uniform ejection strategy

Oct 2009

Volkswagen India Pvt. Ltd.

8

Slide no. 8

Mention all the Engraving Details that will Reflect over the part (show the area where Engraving Details will be drafted)

Oct 2009

Volkswagen India Pvt. Ltd.

9

Slide no. 9

Additional Inputs from Supplier’s point of View which are contributing to the DFM (Design for Manufacturing)

Oct 2009

Volkswagen India Pvt. Ltd.

10

Oct 2009

Volkswagen India Pvt. Ltd.

11