Dwh Testing

Testing of DWH There is an exponentially increasing cost associated with finding software defects later in the development lifecycle. In data warehousing, this is compounded because of the additional business costs of using incorrect data to make critical business decisions. Given the importance of early detection of software defects, let's first review some general goals of testing an ETL application:

• •

Data completeness. Ensures that all expected data is loaded.

•

Data quality. Ensures that the ETL application correctly rejects, substitutes default values, corrects or ignores and reports invalid data.

•

Performance and scalability. Ensures that data loads and queries perform within expected time frames and that the technical architecture is scalable.

•

Integration testing. Ensures that the ETL process functions well with other upstream and downstream processes.

•

User-acceptance testing. Ensures the solution meets users' current expectations and anticipates their future expectations.

•

Regression testing. Ensures existing functionality remains intact each time a new release of code is completed.

Data transformation. Ensures that all data is transformed correctly according to business rules and/or design specifications.

Data Completeness One of the most basic tests of data completeness is to verify that all expected data loads into the data warehouse. This includes validating that all records, all fields and the full contents of each field are loaded. Strategies to consider include: • •

•

Comparing record counts between source data, data loaded to the warehouse and rejected records. Comparing unique values of key fields between source data and data loaded to the warehouse. This is a valuable technique that points out a variety of possible data errors without doing a full validation on all fields. Utilizing a data profiling tool that shows the range and value distributions of fields in a data set. This can be used during testing and in production to compare source and target data sets and point out any data anomalies from source systems that may be missed even when the data movement is correct.

•

Populating the full contents of each field to validate that no truncation occurs at any step in the process. For example, if the source data field is a string(30) make sure to test it with 30 characters.

•

Testing the boundaries of each field to find any database limitations. For example, for a decimal(3) field include values of -99 and 999, and for date fields include the entire range of dates expected. Depending on the type of database and how it is indexed, it is possible that the range of values the database accepts is too small. Data Transformation Validating that data is transformed correctly based on business rules can be the most complex part of testing an ETL application with significant transformation logic. One typical method is to pick some sample records and "stare and compare" to validate data transformations manually. This can be useful but requires manual testing steps and testers who understand the ETL logic. A combination of automated data profiling and automated data movement validations is a better long-term strategy. Here are some simple automated data movement techniques:

•

Create a spreadsheet of scenarios of input data and expected results and validate these with the business customer. This is a good requirements elicitation exercise during design and can also be used during testing.

•

• • • • •

Create test data that includes all scenarios. Elicit the help of an ETL developer to automate the process of populating data sets with the scenario spreadsheet to allow for flexibility because scenarios will change. Utilize data profiling results to compare range and distribution of values in each field between source and target data. Validate correct processing of ETL-generated fields such as surrogate keys. Validate that data types in the warehouse are as specified in the design and/or the data model. Set up data scenarios that test referential integrity between tables. For example, what happens when the data contains foreign key values not in the parent table? Validate parent-to-child relationships in the data. Set up data scenarios that test how orphaned child records are handled. Data Quality For the purposes of this discussion, data quality is defined as "how the ETL system handles data rejection, substitution, correction and notification without modifying data." To ensure success in testing data quality, include as many data scenarios as possible. Typically, data quality rules are defined during design, for example:

• • • •

Reject the record if a certain decimal field has nonnumeric data. Substitute null if a certain decimal field has nonnumeric data. Validate and correct the state field if necessary based on the ZIP code. Compare product code to values in a lookup table, and if there is no match load anyway but report to users. Depending on the data quality rules of the application being tested, scenarios to test might include null key values, duplicate records in source data and invalid data types in fields (e.g., alphabetic characters in a decimal field). Review the detailed test scenarios with business users and technical designers to ensure that all are on the same page. Data quality rules applied to the data will usually be invisible to the users once the application is in production; users will only see what's loaded to the database. For this reason, it is important to ensure that what is done with invalid data is reported to the users. These data quality reports present valuable data that sometimes reveals systematic issues with source data. In some cases, it may be beneficial to populate the "before" data in the database for users to view. Performance and Scalability As the volume of data in a data warehouse grows, ETL load times can be expected to increase, and performance of queries can be expected to degrade. This can be mitigated by having a solid technical architecture and good ETL design. The aim of the performance testing is to point out any potential weaknesses in the ETL design, such as reading a file multiple times or creating unnecessary intermediate files. The following strategies will help discover performance issues:

• •

• •

Load the database with peak expected production volumes to ensure that this volume of data can be loaded by the ETL process within the agreed-upon window. Compare these ETL loading times to loads performed with a smaller amount of data to anticipate scalability issues. Compare the ETL processing times component by component to point out any areas of weakness. Monitor the timing of the reject process and consider how large volumes of rejected data will be handled. Perform simple and multiple join queries to validate query performance on large database volumes. Work with business users to develop sample queries and acceptable performance criteria for each query. Integration Testing Typically, system testing only includes testing within the ETL application. The endpoints for system testing are the input and output of the ETL code being tested. Integration testing shows how the application fits into the overall flow of all upstream and downstream applications. When creating integration test scenarios, consider how the overall process can break and focus on touchpoints between applications rather than within one

application. Consider how process failures at each step would be handled and how data would be recovered or deleted if necessary. Most issues found during integration testing are either data related to or resulting from false assumptions about the design of another application. Therefore, it is important to integration test with production-like data. Real production data is ideal, but depending on the contents of the data, there could be privacy or security concerns that require certain fields to be randomized before using it in a test environment. As always, don't forget the importance of good communication between the testing and design teams of all systems involved. To help bridge this communication gap, gather team members from all systems together to formulate test scenarios and discuss what could go wrong in production. Run the overall process from end to end in the same order and with the same dependencies as in production. Integration testing should be a combined effort and not the responsibility solely of the team testing the ETL application. User-Acceptance Testing The main reason for building a data warehouse application is to make data available to business users. Users know the data best, and their participation in the testing effort is a key component to the success of a data warehouse implementation. User-acceptance testing (UAT) typically focuses on data loaded to the data warehouse and any views that have been created on top of the tables, not the mechanics of how the ETL application works. Consider the following strategies: • • • •

Use data that is either from production or as near to production data as possible. Users typically find issues once they see the "real" data, sometimes leading to design changes. Test database views comparing view contents to what is expected. It is important that users sign off and clearly understand how the views are created. Plan for the system test team to support users during UAT. The users will likely have questions about how the data is populated and need to understand details of how the ETL works. Consider how the users would require the data loaded during UAT and negotiate how often the data will be refreshed. Regression Testing Regression testing is revalidation of existing functionality with each new release of code. When building test cases, remember that they will likely be executed multiple times as new releases are created due to defect fixes, enhancements or upstream systems changes. Building automation during system testing will make the process of regression testing much smoother. Test cases should be prioritized by risk in order to help determine which need to be rerun for each new release. A simple but effective and efficient strategy to retest basic functionality is to store source data sets and results from successful runs of the code and compare new test results with previous runs. When doing a regression test, it is much quicker to compare results to a previous execution than to do an entire data validation again.