CISCO CCNA Certifications: CCNA 2:Module 3 SEARCH BLOG
FLAG BLOG
Next Blog»
Create Blog | Sign In
CISCO CCNA CERTIFICATIONS MONDAY, 11 AUGUST 2008
CCNA 2:Module 3 Options With Highlight Colours are Correct Answer 1. Which two statements correctly describe the concepts of administrative distance and metric?
Team Fortress 2 Servers Get your affordable high quality voice and game server today! GaloreGameServers.Com
(Choose two.) Administrative distance refers to the trustworthiness of a particular route. Routes with the smallest metric to a destination indicate the best path. 2. Refer to the exhibit. Which statement correctly describes how R1 will determine the best path to R2? R1 will install an EIGRP route using network B in its routing table because the administrative distance of EIGRP is lower
Free People Search Free People Search. Find Anyone. Find Any E Mail Address. Affiliate. www.people---search.com
than RIP. 3. Which two statements are true regarding classless routing protocols? (Choose two.) sends subnet mask information in routing updates allows for use of both 192.168.1.0/30 and 192.168.1.16/28 subnets in the same topology 4. Which command would the network administrator
Classifieds - 100% free Your World's Center for free ads. Select country, language,ad=link www.TransWorld-Ads.com
issue to determine if load balancing is in effect on a router? show ip route
Your Ad Here! BIDVERTISER ADS
5. Which statement is true regarding routing protocols?
BLOG ARCHIVE
EIGRP uses DUAL to calculate the shortest path and can be
▼ 2008 (90)
configured to do unequal cost load balancing.
▼ August (37)
6. Which two conditions would create a setting where the use of a distance-vector routing protocol would be efficient? (Choose two.) the network is using a hub and spoke topology the network is using a flat design
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-3.html[10/29/2008 3:34:48 PM]
CISCO CCNA netacad 4 semester Questions 640 802 CCNA Recommend Readings CCNA 2 v4.0 download
CISCO CCNA Certifications: CCNA 2:Module 3
CCNA3 v4.0 download It allows a router to share information about known
CCNA4 v4.0 download(updated 21/7/2008)
networks with other routers.
CCNA 3:Module 7
7. What is the purpose of a routing protocol?
CCNA 3:Module 6 8. Which of the following best describes the operation
CCNA 3:Module 5
of distance vector routing protocols?
CCNA 3:Module 4
They send their routing tables to directly connected
CCNA 3:Module 3
neighbors.
CCNA 3:Module 2
9. Which of the following is associated with link-state
CCNA 3:Module 1
routing protocols?
CCNA 2:Final Set 3
shortest-path first calculations
CCNA 2:Final Set 2 10. Why is fast convergence desirable in networks that
CCNA 2:Module 11
use dynamic routing protocols?
CCNA 2:Module 10
Routers may make incorrect forwarding decisions until the
CCNA 2:Module 9
network has converged.
CCNA 2:Module 8 CCNA 2:Module 7
11. Which of the following conditions must be met in
CCNA 2:Module 6
order for a network to have converged
CCNA 2:Module 5
The routers in the network are operating with consistent
CCNA 2:Module 4
routing knowledge.
CCNA 2:Module 3
12. Which two statements are true regarding metrics?
CCNA 2:Module 2
(Choose two.)
CCNA 2:Module 1
EIGRP uses bandwidth as a metric.
CCNA 1:Final
OSPF uses cost based on bandwidth as a metric.
CCNA 1:Module 11 CCNA 1:Module 10
13. Which two statements are true regarding the
CCNA 1:Module 9
advantages of the use of static routes? (Choose two).
CCNA 1:Module 8
increased security
CCNA 1:Module 7
the administrator maintains control over routing
CCNA 1:Module 6 CCNA 1:Module 5
14. The following line of code is displayed in a routing
CCNA 1:Module 4
table: R
209.165.201.0/24
[120/2]
via
CCNA 1:Module 3
192.168.252.2,
00:00:16, S0/0/0
CCNA 1:Module 2
What can be concluded from this output?
CCNA 1:Module 1
The value, 120, is used to determine the best path when a router has more than one routing protocol configured for the same destination network. 15. What will be the result of the following commands?
► July (13) ► June (13) ► May (27)
ORL(config)# interface fastethernet 0/0 ORL(config-if)# ip address 172.16.3.1 255.255.255.0 ORL(config-if)# no shutdown
LABELS
A routing table entry is made to the 172.16.3.0 network
CCNA 1 UPDATED (12)
with a code of "C".
CCNA 2 UPDATED (12)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-3.html[10/29/2008 3:34:48 PM]
CISCO CCNA Certifications: CCNA 2:Module 3
CCNA 3 UPDATED (7) 16. An engineer creates a static route by entering the
CCNA tieng viet (1)
Router(config)#
255.255.255.0
CCNA1 (16)
192.168.1.2 command. What can be concluded about
ip
route
10.0.0.0
CCNA2 (20)
this route?
CCNA3 (10)
The administrative distance of this route is 1.
CCNA4 (8)
17. Refer to the exhibit. Router1 and Router2 are running
EIGRP.
All
interfaces
are
operational and
Cisco Exploration 4.0 (3) ebook CCNA (2)
packets can be forwarded between all networks. What
EbooK_tool_CCNA (7)
information will be found in the routing table for
key_CCNA v4 (3)
Router1?
key_CCNA4 (13)
The
administrative
distance
of
the
route
to network
Labpro (2)
172.16.0.0 will be 90. 18. The following line of code is present in the routing table: 10.16.1.0/27 [110/129] via 192.168.1.5, 00:00:05, Serial0/0/1 What does the number 129 indicate in this output? The cost for this link has a value of 129. 19. A growing medium-sized manufacturing company recently began to have routing instability issues. The company uses static routes and has a mixture of over 30
Cisco
and
non-Cisco
routers.
The
network
administrator has decided to convert the network to dynamic routing. What characteristics of protocols should be considered in this selection process? OSPF can be used between the routers. 20. Refer to the exhibit. If RIP is the routing protocol, what is the value of the metric from router A to network 192.168.5.0/24? 3 21. A router learns two paths with equal metrics to a destination network via the RIP routing protocol. How will the router handle packets to the destination network? The router will install both routes in the routing table and load balance between the two.
POSTED BY SNOWANGEL AT 04:27 LABELS: CCNA 2 UPDATED
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-3.html[10/29/2008 3:34:48 PM]
CISCO CCNA Certifications: CCNA 2:Module 3
0 COMMENTS: Post a Comment Newer Post
Home
Older Post
Subscribe to: Post Comments (Atom)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-3.html[10/29/2008 3:34:48 PM]