Cisco Ccna Certifications_ Ccna 2_module 5
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View Cisco Ccna Certifications_ Ccna 2_module 5 as PDF for free.
More details
- Words: 1,053
- Pages: 4
CISCO CCNA Certifications: CCNA 2:Module 5 SEARCH BLOG
FLAG BLOG
Next Blog»
Create Blog | Sign In
CISCO CCNA CERTIFICATIONS MONDAY, 11 AUGUST 2008
CCNA 2:Module 5 Options With Highlight Colours are Correct Answer 1. Refer to the exhibit. The network that is shown is running RIPv1. The 192.168.10.0/24 network was
Make Up To $12000 A Week Great Home Based Business. Become A Free Member Today www.directmatches.com
recently added and will only contain end users. What command or set of commands should be entered on Router1 to prevent RIPv1 updates from being sent to the end user devices on the new network while still allowing this new network to be advertised to other routers? Router1(config-router)# no network 192.168.10.0 2. The following line was displayed in the output of the
Team Fortress 2 Servers Get your affordable high quality voice and game server today! GaloreGameServers.Com
show ip route command. R 192.168.3.0/24 [120/3] via 192.168.2.2, 00:00:30, Serial0/0 What is the value of the routing metric? 3 3. Which of the following is considered a limitation of RIP v1? RIP v1 does not send subnet mask information in its updates. 4. Refer to the exhibit. The Ethernet interface on Router2 goes down and the administrator notices that
Free People Search Free People Search. Find Anyone. Find Any E Mail Address. Affiliate. www.people---search.com
Your Ad Here! BIDVERTISER ADS
the route is still in the Router1 routing table. How much longer will Router1 keep the down network in its routing table before marking it as possibly down?
BLOG ARCHIVE
155 seconds
▼ 2008 (90)
5. Refer to the exhibit. Router1 is running RIPv1. What
▼ August (37)
command was entered into Router1 to configure the gateway of last resort?
CISCO CCNA netacad 4 semester Questions
ip route 0.0.0.0 0.0.0.0 S0/0/1
640 802 CCNA Recommend Readings
6. What are three characteristics of the RIPv1 routing
CCNA 2 v4.0 download
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
CISCO CCNA Certifications: CCNA 2:Module 5
protocol? (Choose three.)
CCNA3 v4.0 download
uses hop count as a metric considers a metric of 16 as infinity
CCNA4 v4.0 download(updated 21/7/2008)
calculates metrics using the Bellman Ford algorithm
CCNA 3:Module 7 CCNA 3:Module 6
7. Which of the following would be the correct
CCNA 3:Module 5
command sequence to enable RIP on Router B for all
CCNA 3:Module 4
connected networks?
CCNA 3:Module 3
RouterB(config)# router rip
CCNA 3:Module 2
RouterB(config-router)# network 198.16.4.0
CCNA 3:Module 1
RouterB(config-router)# network 210.36.7.0
CCNA 2:Final Set 3
RouterB(config-router)# network 220.17.29.0
CCNA 2:Final Set 2 8. What is the default update period in seconds for the
CCNA 2:Module 11
RIP routing protocol?
CCNA 2:Module 10
30
CCNA 2:Module 9 CCNA 2:Module 8
9. Refer to the exhibit. What can be concluded from the
CCNA 2:Module 7
routing table output of router B?
CCNA 2:Module 6
The default-information originate command has been
CCNA 2:Module 5
entered on A.
CCNA 2:Module 4
10. Refer to the exhibit. A network consists of multiple
CCNA 2:Module 3
routers. What can be verified when the show ip
CCNA 2:Module 2
protocols command is issued on one of the routers in
CCNA 2:Module 1
the network?
CCNA 1:Final
routing protocol configuration in use for IP on this router
CCNA 1:Module 11 CCNA 1:Module 10
11. Refer to the exhibit. All routers are configured with
CCNA 1:Module 9
valid interface addresses in the indicated networks and
CCNA 1:Module 8
are running RIPv1. The network is converged. Which
CCNA 1:Module 7
routes are present in the routing tables?
CCNA 1:Module 6
All routers have all /30 routes. Routers A and E also have
CCNA 1:Module 5
some of the /24 routes in their routing table.
CCNA 1:Module 4 12. Which two statements are true regarding the
CCNA 1:Module 3
characteristics of RIPv1? (Choose two).
CCNA 1:Module 2
It is a distance vector routing protocol.
CCNA 1:Module 1
The data portion of a RIP message is encapsulated into a UDP segment.
► July (13) ► June (13)
13. Which command or set of commands will stop the RIP routing process?
► May (27)
RouterB(config)# no router rip 14. Refer to the exhibit. All routers in the exhibit are
LABELS
running RIP v1. The network administrator issues the
CCNA 1 UPDATED (12)
show ip route command on router A. What routes
CCNA 2 UPDATED (12)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
CISCO CCNA Certifications: CCNA 2:Module 5
would appear in the routing table output if the network
CCNA 3 UPDATED (7)
is converged? (Choose two).
CCNA tieng viet (1)
R 192.168.2.0/24 [120/1]
CCNA1 (16)
R 10.10.1.0/24 [120/2]
CCNA2 (20)
15. Which command will display RIP activity as it occurs on a router debug ip rip
CCNA3 (10) CCNA4 (8) Cisco Exploration 4.0 (3) ebook CCNA (2)
16. Refer to the output from the show ip route
EbooK_tool_CCNA (7)
command. What can be concluded from the output of
key_CCNA v4 (3)
this router command?
key_CCNA4 (13)
There are two equal cost paths to network 1.0.0.0.
Labpro (2)
17. Refer to the exhibit. Router1 and Router2 are running the RIPv1 protocol. The network administrator configures the command network 10.1.0.0 on Router1. What network will Router1 advertise to Router2? 10.0.0.0/8 18. Refer to the exhibit. Pings between the serial interfaces of the routers are successful. Hosts on each LAN can ping the Fa0/0 interface of the router to which they are directly connected through the switch. However, pings between hosts on the 10.1.1.0/24 and 10.1.2.0/24 networks are unsuccessful. What is a likely cause of this problem? RIP is configured incorrectly on R1. 19. What will happen if an interface IP address is entered for the address portion of the network command in a RIPv1 configuration instead of a network address? All interfaces in the same classful network as the configured address will be included in the RIPv1 routing process. 20. Refer to the exhibit. All routers that are shown are running the RIP routing protocol. All unknown IP traffic must be forwarded to the ISP. What router or set of routers are recommended to have both a default route and the default-information originate command issued to implement this forwarding policy? only the gateway router POSTED BY SNOWANGEL AT 05:08 LABELS: CCNA 2 UPDATED
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
CISCO CCNA Certifications: CCNA 2:Module 5
0 COMMENTS: Post a Comment Newer Post
Home
Older Post
Subscribe to: Post Comments (Atom)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
FLAG BLOG
Next Blog»
Create Blog | Sign In
CISCO CCNA CERTIFICATIONS MONDAY, 11 AUGUST 2008
CCNA 2:Module 5 Options With Highlight Colours are Correct Answer 1. Refer to the exhibit. The network that is shown is running RIPv1. The 192.168.10.0/24 network was
Make Up To $12000 A Week Great Home Based Business. Become A Free Member Today www.directmatches.com
recently added and will only contain end users. What command or set of commands should be entered on Router1 to prevent RIPv1 updates from being sent to the end user devices on the new network while still allowing this new network to be advertised to other routers? Router1(config-router)# no network 192.168.10.0 2. The following line was displayed in the output of the
Team Fortress 2 Servers Get your affordable high quality voice and game server today! GaloreGameServers.Com
show ip route command. R 192.168.3.0/24 [120/3] via 192.168.2.2, 00:00:30, Serial0/0 What is the value of the routing metric? 3 3. Which of the following is considered a limitation of RIP v1? RIP v1 does not send subnet mask information in its updates. 4. Refer to the exhibit. The Ethernet interface on Router2 goes down and the administrator notices that
Free People Search Free People Search. Find Anyone. Find Any E Mail Address. Affiliate. www.people---search.com
Your Ad Here! BIDVERTISER ADS
the route is still in the Router1 routing table. How much longer will Router1 keep the down network in its routing table before marking it as possibly down?
BLOG ARCHIVE
155 seconds
▼ 2008 (90)
5. Refer to the exhibit. Router1 is running RIPv1. What
▼ August (37)
command was entered into Router1 to configure the gateway of last resort?
CISCO CCNA netacad 4 semester Questions
ip route 0.0.0.0 0.0.0.0 S0/0/1
640 802 CCNA Recommend Readings
6. What are three characteristics of the RIPv1 routing
CCNA 2 v4.0 download
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
CISCO CCNA Certifications: CCNA 2:Module 5
protocol? (Choose three.)
CCNA3 v4.0 download
uses hop count as a metric considers a metric of 16 as infinity
CCNA4 v4.0 download(updated 21/7/2008)
calculates metrics using the Bellman Ford algorithm
CCNA 3:Module 7 CCNA 3:Module 6
7. Which of the following would be the correct
CCNA 3:Module 5
command sequence to enable RIP on Router B for all
CCNA 3:Module 4
connected networks?
CCNA 3:Module 3
RouterB(config)# router rip
CCNA 3:Module 2
RouterB(config-router)# network 198.16.4.0
CCNA 3:Module 1
RouterB(config-router)# network 210.36.7.0
CCNA 2:Final Set 3
RouterB(config-router)# network 220.17.29.0
CCNA 2:Final Set 2 8. What is the default update period in seconds for the
CCNA 2:Module 11
RIP routing protocol?
CCNA 2:Module 10
30
CCNA 2:Module 9 CCNA 2:Module 8
9. Refer to the exhibit. What can be concluded from the
CCNA 2:Module 7
routing table output of router B?
CCNA 2:Module 6
The default-information originate command has been
CCNA 2:Module 5
entered on A.
CCNA 2:Module 4
10. Refer to the exhibit. A network consists of multiple
CCNA 2:Module 3
routers. What can be verified when the show ip
CCNA 2:Module 2
protocols command is issued on one of the routers in
CCNA 2:Module 1
the network?
CCNA 1:Final
routing protocol configuration in use for IP on this router
CCNA 1:Module 11 CCNA 1:Module 10
11. Refer to the exhibit. All routers are configured with
CCNA 1:Module 9
valid interface addresses in the indicated networks and
CCNA 1:Module 8
are running RIPv1. The network is converged. Which
CCNA 1:Module 7
routes are present in the routing tables?
CCNA 1:Module 6
All routers have all /30 routes. Routers A and E also have
CCNA 1:Module 5
some of the /24 routes in their routing table.
CCNA 1:Module 4 12. Which two statements are true regarding the
CCNA 1:Module 3
characteristics of RIPv1? (Choose two).
CCNA 1:Module 2
It is a distance vector routing protocol.
CCNA 1:Module 1
The data portion of a RIP message is encapsulated into a UDP segment.
► July (13) ► June (13)
13. Which command or set of commands will stop the RIP routing process?
► May (27)
RouterB(config)# no router rip 14. Refer to the exhibit. All routers in the exhibit are
LABELS
running RIP v1. The network administrator issues the
CCNA 1 UPDATED (12)
show ip route command on router A. What routes
CCNA 2 UPDATED (12)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
CISCO CCNA Certifications: CCNA 2:Module 5
would appear in the routing table output if the network
CCNA 3 UPDATED (7)
is converged? (Choose two).
CCNA tieng viet (1)
R 192.168.2.0/24 [120/1]
CCNA1 (16)
R 10.10.1.0/24 [120/2]
CCNA2 (20)
15. Which command will display RIP activity as it occurs on a router debug ip rip
CCNA3 (10) CCNA4 (8) Cisco Exploration 4.0 (3) ebook CCNA (2)
16. Refer to the output from the show ip route
EbooK_tool_CCNA (7)
command. What can be concluded from the output of
key_CCNA v4 (3)
this router command?
key_CCNA4 (13)
There are two equal cost paths to network 1.0.0.0.
Labpro (2)
17. Refer to the exhibit. Router1 and Router2 are running the RIPv1 protocol. The network administrator configures the command network 10.1.0.0 on Router1. What network will Router1 advertise to Router2? 10.0.0.0/8 18. Refer to the exhibit. Pings between the serial interfaces of the routers are successful. Hosts on each LAN can ping the Fa0/0 interface of the router to which they are directly connected through the switch. However, pings between hosts on the 10.1.1.0/24 and 10.1.2.0/24 networks are unsuccessful. What is a likely cause of this problem? RIP is configured incorrectly on R1. 19. What will happen if an interface IP address is entered for the address portion of the network command in a RIPv1 configuration instead of a network address? All interfaces in the same classful network as the configured address will be included in the RIPv1 routing process. 20. Refer to the exhibit. All routers that are shown are running the RIP routing protocol. All unknown IP traffic must be forwarded to the ISP. What router or set of routers are recommended to have both a default route and the default-information originate command issued to implement this forwarding policy? only the gateway router POSTED BY SNOWANGEL AT 05:08 LABELS: CCNA 2 UPDATED
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
CISCO CCNA Certifications: CCNA 2:Module 5
0 COMMENTS: Post a Comment Newer Post
Home
Older Post
Subscribe to: Post Comments (Atom)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-5.html[10/29/2008 3:48:23 PM]
Related Documents
Cisco Ccna Certifications_ Ccna 2_module 5
May 2020 6
Exam 5 Cisco Ccna 3
May 2020 3
Cisco Noter Ccna 2
May 2020 6
Cisco Ccna Certifications_ Ccna 2_module 7
May 2020 5
Cisco Ccna Certifications_ Ccna 2_module 8
May 2020 2