CISCO CCNA Certifications: CCNA 2:Module 7 SEARCH BLOG
FLAG BLOG
Next Blog»
Create Blog | Sign In
CISCO CCNA CERTIFICATIONS MONDAY, 11 AUGUST 2008
CCNA 2:Module 7 Options With Highlight Colours are Correct Answer 1. Refer to the exhibit. If all routers are running RIP version 2, why is there no route for the
Make Up To $12000 A Week Great Home Based Business. Become A Free Member Today www.directmatches.com
192.168.1.32/27 network? Rip version 2 will auto summarize routes by default. 2. Refer to the exhibit. Which two statements are true? (Choose two.) Router1 will install a route to 192.168.0.0/20 Router2 will not install a route to 192.168.16.0/20 3. Refer to the exhibit. Which command on which
Team Fortress 2 Servers Get your affordable high quality voice and game server today! GaloreGameServers.Com
router will allow Router1 to learn about the 192.168.0.0/20 network? Router2(config-router)# version 2 4. What are two reasons to implement RIP version 2 rather than RIP version 1? (Choose two.) RIP version 2 supports VLSM. RIP version 2 supports routing update authentication. 5. How are RIP v1 and RIP v2 similar to one another?
Free People Search Free People Search. Find Anyone. Find Any E Mail Address. Affiliate. www.people---search.com
(Choose three.) They both use hop count as a metric. They both have the same metric value for infinite distance.
Your Ad Here! BIDVERTISER ADS
They both use split horizon to prevent routing loops. 6. Refer to the exhibit. Routers East and West are
BLOG ARCHIVE
configured using RIPv1. Both routers are sending
▼ 2008 (90)
updates about their directly connected routes. The East router can ping the West router serial interface and
▼ August (37)
West can ping the serial interface of East. However, neither router has dynamically learned routes from the other. What is most likely the problem? VLSM is not supported by RIPv1.
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-7.html[10/29/2008 3:49:54 PM]
CISCO CCNA netacad 4 semester Questions 640 802 CCNA Recommend Readings CCNA 2 v4.0 download
CISCO CCNA Certifications: CCNA 2:Module 7
7. Refer to the exhibit. Which command will allow
CCNA3 v4.0 download
Router2 to learn about the 192.168.16.0/28 network?
CCNA4 v4.0 download(updated 21/7/2008)
Router1(config-router)# network 192.168.16.0
CCNA 3:Module 7 8. Refer to the exhibit. All routers are running RIP
CCNA 3:Module 6
version 2. JAX is configured to just advertise the
CCNA 3:Module 5
10.0.0.0/24 network. CHI is configured to advertise the
CCNA 3:Module 4
172.16.0.0/16 network. A network administrator
CCNA 3:Module 3
enters the commands shown in the exhibit. What
CCNA 3:Module 2
changes will occur in
CCNA 3:Module 1
this network? The CHI router will install a route to the 192.168.0.0/16
CCNA 2:Final Set 3
network in its routing table.
CCNA 2:Final Set 2 CCNA 2:Module 11
9. Refer to the exhibit. A technician needs to add a new
CCNA 2:Module 10
loopback interface to test routing functionality and
CCNA 2:Module 9
network design. The technician enters the following set
CCNA 2:Module 8
of commands on the router:
CCNA 2:Module 7
Sanford(config)# interface loopback1
CCNA 2:Module 6
Sanford(config-if)# ip address 192.168.6.62
CCNA 2:Module 5
255.255.255.252
CCNA 2:Module 4
10. Why does the router respond with an error?
CCNA 2:Module 3
The network address for Loopback1 overlaps with an already
CCNA 2:Module 2
configured interface address.
CCNA 2:Module 1
11. What is the maximum network diameter permitted
CCNA 1:Final
by the default metric of RIPv2?
CCNA 1:Module 11
15 hops
CCNA 1:Module 10 CCNA 1:Module 9
12. What are two functions of the network command
CCNA 1:Module 8
used when configuring routing protocols? (Choose
CCNA 1:Module 7
two.)
CCNA 1:Module 6
identifies which networks will be included in the routing updates
CCNA 1:Module 5
determines which interfaces can send and receive routing
CCNA 1:Module 4
updates
CCNA 1:Module 3 CCNA 1:Module 2
13. Refer to the exhibit. What can be concluded from the output shown in the exhibit? The no auto-summary has not been configured on this router. 14. A network administrator has been told that the
CCNA 1:Module 1 ► July (13) ► June (13) ► May (27)
company IP address infrastructure must adhere to RFC 1918. What three IP address ranges from RFC 1918 could the administrator use on the network? (Choose
LABELS
three.)
CCNA 1 UPDATED (12)
10.0.0.0/8
CCNA 2 UPDATED (12)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-7.html[10/29/2008 3:49:54 PM]
CISCO CCNA Certifications: CCNA 2:Module 7
172.16.0.0/12
CCNA 3 UPDATED (7)
192.168.0.0/16
CCNA tieng viet (1) CCNA1 (16)
15. Refer to the exhibit. All routers are running RIPv1.
CCNA2 (20)
What changes will occur in the routing table of router B
CCNA3 (10)
if
a
loopback
interface
with
an
address
of
10.16.1.129/27 is configured on router B? A connected route to the 10.16.1.128/27 network is added.
CCNA4 (8) Cisco Exploration 4.0 (3) ebook CCNA (2)
16. A network administrator installed four new routers
EbooK_tool_CCNA (7)
that are running RIPv2. Router1 is a boundary router in
key_CCNA v4 (3)
the RIPv2 network and has a default route configured.
key_CCNA4 (13)
Once
Labpro (2)
the
network
administrator
has
enters
converged,
the
network
Router1(config-router)#
defaultinformation originate on Router1. How will this affect the network? propagates the default route to all routers in the network 17. Refer to the exhibit. The exhibited network contains a
mixture
of
Cisco
and
non-Cisco
routers. The
command debug ip rip was entered on the JAX router. All routers are running the same version of RIP. Router CHI
and
Router
ORL
are
not
able
to
reach the
192.168.1.16/28 network. What is a possible solution to this problem? Configure RIPv2 on routers. 18. What field was added to the RIP message header by RFC 1723 to add support for VLSM and CIDR? subnet mask 19. Refer to the exhibit. What effect will the commands that are shown have on RIP updates for Router1? Only version 2 updates are sent to 224.0.0.9. 20. Refer to the exhibit. RIPv1 is configured as the routing protocol for the network that is shown. The following commands are used on each router: router rip network 10.0.0.0 network 172.16.0.0 21. When this configuration is complete, users on the LAN of each router are unable to access the remote LANs. Why? RIPv1 is unable to route to discontiguous subnets of a major network.
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-7.html[10/29/2008 3:49:54 PM]
CISCO CCNA Certifications: CCNA 2:Module 7
22. RIPv2 is the configured routing protocol on the routers in a network. The command Router(configrouter)# no version 2 is entered on the routers. What effect does entering this command have on routing updates? Version 1 and 2 updates will be received and the version 2 updates will not be sent. POSTED BY SNOWANGEL AT 05:11
0 COMMENTS: Post a Comment Newer Post
Home
Older Post
Subscribe to: Post Comments (Atom)
http://cisco-ccna-certifications.blogspot.com/2008/08/ccna-2module-7.html[10/29/2008 3:49:54 PM]