Anotec Worldwide Brochure

solutionsworldwide

www.anotec.com.au

Our Logos and Registered trademarks

Anotec BLUE®

Fogmaster®

ANOTEC® ODOUR CONTROL DOING WHAT COMES NATURALLY. Anotec® Odour Control – Vapour & Liquid Phase Anotec Odour Control solutions are odour mitigation chemicals for industrial, fugitive and related odorous emissions.

COMPOSITION: Proprietary

safe,

synergized

surfactants, nature identical odour control agents.

FEATURES: Removal

Applications To significantly reduce and/or eliminate malodours associated with metal casting foundries, sewage treatment, landfills, and plastic & rubber product manufacturers, food processing, site remediation and more.

blend,

Efficiency for

malodours >85%.

most general

Safe, non-toxic and

immediate reduction. Proven scientifically and

commercially

to

remove

and

significantly reduce fugitive, point source and liquid phase malodours

ANOTEC O DO U R C O NT R O L T E C H N O LO G IE S

30-32 Chegwyn St | BOTANY NSW 2019 | Tel: +612 9700 1222 | Fax: +612 9700 1771 | Email: [email protected] | Website: http://www.anotec.com.au

Anotec – Looking after our Environment

General Information, Chemistry & Description

The chemical constituents of Anotec® odour control formulations are highly active organic compounds that include but are not limited to sugar derivatives and peptides. Anotec’s unique blend of compounds forms complexes that effectively absorb and treat offending odour molecules. Further, the Anotec® blend, when applied, reduces the surface tension in the liquid phase and assists in the blocking or inhibition of volatisation of malodours. The effectiveness of Anotec® Odour Control formulations stems from the unique chemistry of synergized surfactants and odour profiling technology, enabling efficient and immediate reduction in chemical odour concentrations when compared to conventional odour abatement technologies. The non-ionic surfactants in the product are readily biodegradable in standard BOD tests and CO2 evolution procedures. Neither slight branching nor increments in the length of the carbon chain appear to exert a significant effect on the rate of degradation. Run-off can be disposed of via normal wastewater channels. The proprietary additives for binding, enhancing biodegradation and odour profiling – each of which is >2% - are all food grade quality. The active ingredients in this product have boiling points in >1500C. Anotec® is fully miscible in water and the product does not have a measurable flash point. Application via a misting or fogging system ensures direct contact between the Anotec odour control formulation and the malodorous emission. Upon direct contact, odour analysis shows a significant reduction in chemical odour concentrations for each component identified in any malodorous mix.* * GC/MS & Olfactometry – Laboratory & Field tests