Zone Based Energy Aware Multi-level Multi-hop Clustering Protocol For Wsn

National Institute of Science & Technology

Zone Based Energy Aware Multi-level Multi-hop Clustering Protocol for WSN Project id:14118 Computer Science Department

Presented By: Sonali Satapathy Smriti Sikha Palo

Roll#201511076 Roll#201511071

Under the guidance of Prof. Ashish Kumar Dass Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[1]

National Institute of Science & Technology

Content  Introduction  Objective

 Importance of the project in Engineering  Coding Review  Possible Outcome  Conclusion CONTENT Objective Introduction

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[2]

National Institute of Science & Technology

Introduction WIRELESS SENSOR NETWORK ?????

Wireless Sensor Network(WSN) refers to a spatially dispersed and dedicated sensors for monitoring and recording the physical conditions of the environment and organizing the collected data and central location. l location.

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[3]

National Institute of Science & Technology

What is Clustering?  Clustering involves grouping of sensor nodes and electing cluster heads for collect the data from respective cluster’s nodes and forward the aggregated data to base station.  Multi-hop , it is the technique , used in WSN to connect two or more wireless hops to convey information from source to destination.  Multi-zone , is the technique ,which divides the clustering area into no of zones according to the distance and uses the clustering methods in these zones.ntr Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[4]

National Institute of Science & Technology

Objectives To design and simulate a Wireless Sensor Network(WSN) scenario to implement the cluster based routing technique along with multi-hop and multi-zone communication with reliable data transmission and with limited power supply.

, is one of the important methods for prolonging t

g

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[5]

National Institute of Science & Technology

Importance of the project in engineering  Preserve the consumption of energy

 Improve the scalability  Elevates the robustness  Helps in in-depth understanding of WSN protocols

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[6]

National Institute of Science & Technology

Coding Review

[7]

[8]

National Institute of Science & Technology

National Institute of Science & Technology

Possible Outcome A Cluster based multi hop and multi zone based routing protocol which will utilize less amount of energy while data transmission from different location to base station. The model’s efficiency can be find out by comparing and contrasting different available other model.

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[9]

National Institute of Science & Technology

Conclusion In wireless sensor area network clustering is used to increase network lifetime. And if the base station is in center than it will also reduce the communication cost. Transmission energy depends on the distance and distance for the communication is less in multiple base station scenarios.  In zone based algorithm the size of the zone will also affect the residual energy of the node. Less zone area will increase the life time of network.

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[10]

National Institute of Science & Technology

Thank You!

Sonali Satapathy (201511076) & Smriti Sikha Palo (201511071)

[11]