1
2
Instructions for calibrating an inverted X120.
Centre on X120
100mm x 100mm Calibration Square
125mm x 125mm Bounding Box
Scott Hodgins & Jon Ward
3
4
5
6
7
8
Correcting the calibration grid has three stages... STAGE ONE: Flip the bounding box top to bottom A. Move 1 to 6 B. Move 2 to 7 STAGE TWO: Flip the bounding box left to right C. Move 3 to 5 D. Move 6 to 8 STAGE THREE: Reposition the box E. Move 4 to 1 F. Move 7 to 3 G. Move 5 to 2 H. Move 8 to 4