Voice Over IP Chapter 4 Cisco Voice Hardware
Type of Devices Cards
NM
Type of Devices Cards Data
Voice
NM
Type of Devices Cards Data
Voice
NM Data
VNM
Type of Devices Cards Data WIC 1T WIC 2T
Voice
NM Data
VNM
Type of Devices Cards Data WIC 1T WIC 2T
Voice
NM Data
Digital Analog
VNM
Type of Devices Cards Data WIC 1T WIC 2T
Voice
NM Data
Digital Analog MFT
FXS FXO E&M
VNM
Type of Devices Network Module Data
VNM
Type of Devices Network Module Data NM-4T NM-4 BRI (S / T )
VNM
Type of Devices Network Module Data NM-4T NM-4 BRI (S / T )
VNM Digital Analog
Type of Devices Network Module Data NM-4T NM-4 BRI
VNM Digital Analog
(S / T )
NM-HDV
Type of Devices Network Module Data NM-4T NM-4 BRI
VNM Digital Analog
(S / T )
NM-HDV
NM-1V NM-2V NM-HDA
Cisco Voice Products
Data/Voice Integration Access Multiservice Routers.
Cisco 1750 Series Cisco 2600 Series Cisco 3600 Series
Data/Voice Integration Multiservice Routers.
Cisco MC3810 Series Cisco AS5300
Cisco Voice Products
Large scale Data/Voice Integration Multiservice Routers.
Cisco 7200 Cisco 7500 Cisco AS5800
Cisco 1750 Series
Cisco 1750 Series
Cisco 1750 Series Connector/Sl Label/Color ot
Description
Ethernet port 10/100-Mbps ETHERNET (yellow)
Router connection to the local Ethernet network. This port autosenses the speed (10 or 100 Mbps) and duplex mode (full or half) of the device to which it is connected and then operates at the same speed and in the same duplex mode.
Auxiliary port
Modem connection for remote configuration using Cisco IOS software.
AUX (black)
Console port CONSOLE (light blue)
Terminal or PC connection for local configuration using Cisco IOS software.
Cisco 1750 Series WIC/VIC slot SLOT 0
Supports either a Cisco WIC or VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card.
WIC/VIC slot SLOT 1
Supports either a Cisco WIC or VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card.
VIC slot
SLOT 2
Supports one Cisco VIC. For detailed information, refer to the Cisco WAN Interface Cards Hardware Installation Guide that comes with every card.
Power socket
+5, +12, -12 Router connection to the external power supply. VDC
Protective earth
Ground wire
Router connection to earth ground by using a green and yellow 14 AWG ground wire.
Cisco 2600 Series
Cisco 2600 Series
A WIC in each WIC slot (containing interface Serial 0/0 in physical slot W0, and interface Serial 0/1 in physical slot W1)
• A 4-serial-port network module in slot 1 (containing the following ports: Serial 1/0, Serial 1/1, Serial 1/2, and Serial 1/3)
• First built-in Ethernet interface—Ethernet 0/0
• Second built-in Ethernet interface—Ethernet 0/1, or optionally in Cisco 2612 and Cisco 2613 only: Token Ring interface 0/0