Vitto Krislasky Resume

VITTO R. KRISLASKY Emerson Performance Solutions Atlanta Solutions Center 6240 Shiloh Road Alpharetta, GA 30005 (770) 458­4535

SUMMARY OF EXPERIENCE Fourteen   years   experience   in   Pulp   and   Paper   Industry,   twelve   years   experience   in   the  Textile,   Power   and   Utility,   and   Steel   Industry.     Well   versed   in   the   design   of   electrical,  instrumentation and process control systems and their applications to industry.  Expertise in  conceptual   planning,   systems   integration,   and   system   architectures   design.     Expertise  combined   with   creativity  in   optimization   systems,   artificial  intelligence,   and   mathematical  process modeling. 

SPECIFIC EXPERIENCE: EMERSON PERFORMANCE SOLUTIONS (1991 ­ PRESENT) (Includes ORION CEM, INC.   1991 ­ 1999) Atlanta, Georgia Senior Consultant, Senior Product Manager Responsible for overall project and project team management in providing process control,  conceptual   planning,   optimization   systems,   process   modeling,   instrumentation   and  engineering services.  Selected references are: MeadWestvaco Corporation Luke, MD ­ Senior   Consultant   for   conceptual   planning,   design,   implementation,   and  start­up of the process control and optimization systems for Kraft digester  house based on Delta V DCS and Modicon PLC. IP Pine Bluff, AR ­ Senior Consultant for design, implementation, and start­up of the process  control and optimization systems for Kraft digester house based on APACS  DCS.

Interstate Paper Riceboro, GA ­ Senior   Consultant   for   conceptual   planning,   design,   implementation,   and  start­up of the process control and optimization systems for Kraft digester  house based on Delta V DCS. Rayonier Jesup, GA ­ Senior   Consultant   for   conceptual   planning,   design,   implementation,   and  start­up   of   the   process   control   and   optimization   systems   for   “A”   line  pressurized screens and knotters.

VITTO R. KRISLASKY                                                                       PAGE TWO Experience (continued) Rayonier Fernandina Beach, FL ­ Senior   Consultant   for   digester   house   quality   improvement,   include  mathematical   process   modeling,   advanced   control,   and   optimization.  Project is based on MOORE DCS. WEYERHAEUSER. New Bern,NC ­ Consultant   for   design   and   implementation   of   the   process   control   and  optimization   system   for   recovery   boiler,   power   boiler,   and   energy  management   system.   System   design   included   the   CyberRECOVERY,  CyberPOWER,   CyberENERGY,   and   CyberHeader   products.   The   control  strategies were implemented on the RS­3 DCS. ABITIBI. Lufkin, Texas ­ Consultant for design, implementation, and start­up of the process control  and   optimization   system   CyberCOOK   for   Kraft   digester   house   based   on  PROVOX DCS with the POC operator interface. AMBRO. Suceava, ROMANIA ­ Consultant   for   design   and   implementation   of   the   process   control   and  optimization system for two recovery boilers, two evaporator lines, and one  concentrator   line.   System   design   included   the   basic   BMS   and  CyberRECOVERY. The control strategies were implemented on the Delta­V  DCS. Smurfit ­ Stone Container Corporation. Brewton, ALABAMA Consultant for conceptual design of the integrated computer system for mill­ wide environmental reporting “CyberGREEN”. Fort James Inc. Old Town, ME Consultant for design and implementation of the "Load  Shed System" for  power boiler based on MOD­300.

James Maclaren Industries Inc., NEXFOR Thurso Pulp Thurso, Quebec, Canada ­ Consultant for design, implementation, and start­up of the process control  and optimization system for Kraft digester house  based  on BAILEY  DCS  and Allen­Bradley PLC­5. Wausau Papers Brokaw, WI Consultant for conceptual planning of the pulping process modifications and  restructuring, design, implementation,  and  start­up of the process  control  and   optimization   system   for   sulfite   digester   house   based   on   FOXBORO  DCS.

VITTO R. KRISLASKY                                                                   PAGE THREE Experience (continued) Rayonier Fernandina Beach, FL ­ Consultant for conceptual planning, design, implementation, and start­up of  the process control and optimization systems for acid plant and sulfite  digester house based on MOORE DCS and Wonderware. Carolina Power & Light Company (CP&L) Roxboro, NC ­ Senior Project Engineer for design, implementation and start­up of BMS  and Low NOx System for Unit #2 (680 Mwt Coal Boiler). Ketchikan Pulp Company Ketchikan, AK ­ Senior Project Engineer for design and implementation of control system for  ECF/TCF Bleach Plant based on Allen­Bradley PLC­5 and Wonderware. Fraser, Inc.  Edmundston, N.B., Canada ­ Senior   Project   Engineer   for   implementation   and   start­up   sulfite   digesters  optimization system based on Rosemount RS­3 and Allen­Bradley PLC­5. Weyerhaeuser Paper Company Rothchild, Wisconsin ­ Senior Project Engineer for design and implementation of sulfite digesters  optimization system, based on Fisher Provox distributed control system with  OWP in multi window environment. Scott Paper Company Everett, Washington ­ Senior Project Engineer for design of functional specification for sulfite  digesters optimization system, based on Honeywell TDC­3000 and Modicon  PLC. ITT Rayonier, Inc. Fernandina Division Fernandina Beach, Florida ­ Senior Project Engineer for study of Fiber Line (Acid Plant, Digester house  and Bleach Plant) automation and optimization systems. Tembec

Temiscaming, Quebec, Canada Project   Engineer   for   study   of   Bleach   Plant   automation   and   optimization  systems based on Fisher Provox distributed control system. ­

Project   engineer   for   design   automation,   optimization,   and   start­up   of   the  Sulfite digester house.   The project was implemented using Fisher Provox  System and AB PLC­5/40.

VITTO R. KRISLASKY                                                                     PAGE FOUR  Experience (continued) Gist­Brocades Delft, The Netherlands ­ Project   engineer   for   a   complex   batch   penicillin   modification   process,  including all associated distillation columns, centrifuges, dryers, and utilities.  The project was implemented using a Taylor MOD 300 DCS, Taylor Remote  I/O, and IBM PC interface.  Responsible for all aspects of the configuration,  installation, and documentation of the MOD­300 system. ABB­ASEA BROWN BOVERI PROCESS AUTOMATION (1989­1991) (former COMBUSTION ENGINEERING) Atlanta, Georgia FEDERAL PAPER, INC. ­

Senior   Design   Application   Engineer.     Design   AUTOCOOK   application  software and start­up of the two digester houses.

GEORGIA PACIFIC, BELLINGHAM, WA ­

Design Application Engineer.  Design application software for the digesters  house and acid preparation plant.  Application software design in the MOD­ 300 distributed control system with Taylor Remote input­output sections.

INDUSTRIAL TEXTILE FACTORY (1988 ­ 1989) Kharkov, USSR Senior Project Engineer Responsible for design, installation, start­up, and maintenance of automatic control systems  at the factory. LITHUANIAN TEXTILE TRADE CORPORATION (1984 ­ 1988) Vilnius, Lithuania Senior Project Engineer Responsible   for   design,   installation,   and   maintenance   of   centralized   inventory   tracing  system   integrated   with   PLCs   and   robotic   equipment   for   selection   and   distribution   rolls,  boxes and other textile products inside of several facilities in Lithuania. HEAVY INDUSTRY ELECTRIC CORPORATION (1981 ­ 1984) Kharkov, USSR Senior Electrical Engineer Responsible for electrical part of the various projects for industrial enterprises.  Design and 

supervision of the installation of instrumentation  and  electrical equipment integrated with  SIEMENCE electrical drive system for the largest European rolling (steel) mill in Gdanov. NATIONAL INDUSTRIAL STEEL CORPORATION (1976 ­ 1981) Kharkov, USSR Electrical Engineer Design of electrical circuits for M.E.C., artificial lighting, power distribution, instrumentation  panels, and grounding systems for various steel mills.

VITTO R. KRISLASKY                                                                       PAGE FIVE Education

EDUCATION Vilnius Institute of Postgraduate Education, Lithuania (1984­1985) School: Automatic Control Systems

MASTER OF SCIENCE IN ENGINEERING Kharkov Institute of Municipal Engineering (1970­1975) Diploma: Electrical Engineer Educational Credential evaluated in United States by WES, New York.

USA Engineering Courses: ­ PlantWeb University, on­line (08/2003) ­ Delta­V Advanced Control. EPS, Atlanta, GA (06/2002) ­ Delta­V MPC Advanced Control. EPS, Atlanta, GA (01/2002) ­ Delta­V Advanced Control. EPS, Atlanta, GA (05/2000) ­ Delta­V Foundation Fieldbus. Engineering and Design.   Fisher­Rosemount, Atlanta, GA (10/1999) ­ Delta­V Distributed Control System. System Engineering.   Fisher­Rosemount , Austin, TX (08/1999) ­ TAPPI Sharpening Your Presentation Skills.   San Francisco, CA (10/1997)  ­ Effective Personal Productivity.  LMI, Atlanta, GA (1996). ­ Rosemount RS­3 Distributed Control System.  System Engineers.   Laurentide Controls, Montreal, Quebec, Canada (08/1995) ­ PROVOX Distributed Control System.  System Engineers.   Houston, Texas  (07/1994) ­ Delivering “Knock Your Socks Off” Service.

  American Management Association, Atlanta, GA (1994). ­ HONEYWELL TDC­3000 Distributed Control System.   System Engineers, Houston, Texas (12/1993) ­ Allen­Bradley "PLC­5 Family Accelerated", Atlanta,   Georgia (12/1992) ­ PROVOX Distributed Control System.  System Engineers.    Laurentide Controls, Montreal, Quebec, Canada (11/1991)

VITTO R. KRISLASKY                                                                       PAGE SIX Education (continued), Publications, Affiliations

­ TAYLOR MOD­300  Distributed Control System.  Taylor control   language, Rochester, New York (08/90). ­ ISA Professional training program.  Boilers and boiler control   application, Atlanta, Georgia (03/90). ­ TAYLOR MOD­300  Distributed Control System.   System Engineers, Rochester, New York (12/89).

PUBLICATIONS: “Maximum Achievable Control Technology of Sulfite Pulping”. TAPPI Proceedings 1997.  Book 1. (381­384) "Use of Process­Control Systems for Inventory Tracing and  Maintenance Applications".  Magazine "Business Trade" No 1, 1987. "C.A.E. for Power Distribution and Lighting Systems".  Magazine "Lighting Engineering" No. 8, 1979.

AFFILIATIONS Member Technical Association of Pulp and Paper Industry (TAPPI) Membership No. 920350 Member Instrument Society of America Membership No. 04096696