Tutorial 9

Module 9 – Tutorial 1. Using an external CD-ROM system, what is the maximum number of CD-ROM drives that can share a single SCSI ID? 2. What must be done before using a software version of RAID in Windows 2000? 3. You are responsible for upgrading the motherboard in an e-mail server to a RIMM-supported board. You installs two 128 MB RIMMs into two of the four available RIMM slots. When finished, the server fails to power up. What is most likely the problem? 4. Which item, if required, must be configured before the installation of Windows 2000? 5. Which category of service tools enables a network manager to diagnose problems on a network server without having to boot the network operating system? 6. You want to update the server with the latest Windows network service tools. When would such an update require a server shutdown? 7. You increased the disk capacity of an old file server from 2 GB to 40 GB. After the installation, you noticed that only 2 GB of disk capacity was available. What could you try to make the entire disk available? 8. Where must a SCSI chain be terminated? 9. What must be added to a PC to implement disk duplexing if disk mirroring is already implemented? 10. What advantage does software-based RAID have over hardware-based RAID?