True-pivot Instructions (early)
This document was uploaded by user and they confirmed that they have the permission to share it. If you are author or own the copyright of this book, please report to us by using this DMCA report form. Report DMCA
Overview
Download & View True-pivot Instructions (early) as PDF for free.
More details
- Words: 127
- Pages: 1
•
TRUE-P-IVOTTX
TranamlsslonPlvot Boas 4.505 Approximately
./1
I.........
./
BEARING - - - PUT BEARING IN FREEZER PRIOILTO INSTALL
L----~----FOLLOW 2001 HD Service Manual or earlier
---------
1. Pre•• out CLEVE BLOCK. THE SEALS AND SPACERS ARE NO LONGER REQUIRED I 2. Clean bore with SCOTCH BRIGBT. . S. Apply WD·40 to bore. 4. PUT BEARING IN FREEZER 60 MINUTES PRIOR TO INSTALL. NO REAMING REQuuum IF DON·E. 4. Press In TRUE·PIVOT. Each aide must bave equal distanceand slide over .the transboss. 5. Apply liberal amount or ANTI·SEIZE to s b a r t . · · . 6. Put amall amount or g~ease In the "the groov;e on tbe Inside of tbe bearing at each end.
Notea:UnleS8
I'
otherwls~
specl.f1ed
COPYRIGHT 3005 WOWSERINrTY, INC.AU. RIGHTS RESERVED
TRUE-P-IVOTTX
TranamlsslonPlvot Boas 4.505 Approximately
./1
I.........
./
BEARING - - - PUT BEARING IN FREEZER PRIOILTO INSTALL
L----~----FOLLOW 2001 HD Service Manual or earlier
---------
1. Pre•• out CLEVE BLOCK. THE SEALS AND SPACERS ARE NO LONGER REQUIRED I 2. Clean bore with SCOTCH BRIGBT. . S. Apply WD·40 to bore. 4. PUT BEARING IN FREEZER 60 MINUTES PRIOR TO INSTALL. NO REAMING REQuuum IF DON·E. 4. Press In TRUE·PIVOT. Each aide must bave equal distanceand slide over .the transboss. 5. Apply liberal amount or ANTI·SEIZE to s b a r t . · · . 6. Put amall amount or g~ease In the "the groov;e on tbe Inside of tbe bearing at each end.
Notea:UnleS8
I'
otherwls~
specl.f1ed
COPYRIGHT 3005 WOWSERINrTY, INC.AU. RIGHTS RESERVED
Related Documents
True-pivot Instructions (early)
December 2019 3
Instructions
November 2019 33
Instructions
May 2020 16
Instructions
October 2019 44
Instructions
April 2020 18